dsh-fonttune 0.3.4 → 0.3.5

package/CHANGELOG.en.md

@@ -2,6 +2,15 @@
 
 All notable changes to **dsh-fonttune** are documented here. Chinese version: [CHANGELOG.md](CHANGELOG.md).
 
+## [0.3.5] - 2026-09-29
+
+### Fixed
+- **A weight offset inside the old absolute-weight range was rewritten on the way back**: such an offset was read as a pre-relative absolute weight and converted again, which is the "the notch jumps to −1" report from 0.3.1 as soon as the range reaches past +200. The document now states which scale its weight fields are on, so a legacy value is converted once and only where that statement is missing.
+- **The highest notch of the weight slider wrote a value the slider itself cannot show**: rounding the top position up passed the ceiling measured for the font. Every position is now a whole number of steps from the neutral one and stays inside the range.
+
+### Changed
+- **The weight slider picks its step so that every notch is a change you can see**: one notch is the smallest jump between the font's own faces that is clearly visible rather than the smallest possible one, so the control may offer fewer positions than before while every one of them shows; body text changes at every position, and bold text and headings stop once they reach their heaviest face.
+
 ## [0.3.4] - 2026-09-29
 
 ### Fixed

package/CHANGELOG.md

@@ -2,6 +2,15 @@
 
 **dsh-fonttune** 的重要变更都记录在这里。英文版见 [CHANGELOG.en.md](CHANGELOG.en.md)。
 
+## [0.3.5] - 2026-09-29
+
+### 修复
+- **字重偏移落在旧版绝对字重的数值区间里会被改写**：这类偏移读回时会被当成旧版绝对值重新换算，上限一抬高就会重现 0.3.1 那个「档位跳到 −1」。现在文档自己标明字重用的是哪套刻度，旧值只在没有标记的文档里换算一次。
+- **字重滑块最高的一档会写出滑块本身表示不了的数值**：档位向上取整时越过了按字体实测的上限。现在每一档都是中位的整数倍，也不越出上下限。
+
+### 变更
+- **字重滑块改为按「每档都看得见」挑档距**：一档取字体相邻字形里变化足够明显的那一档（不是最细的那一档），档数因此可能比之前少，但每挪一格都能看出来；正文在每一档都换字形，加粗与标题到顶后停住。
+
 ## [0.3.4] - 2026-09-29
 
 ### 修复

package/README.en.md

@@ -9,7 +9,7 @@
 - **Three typography sets** — the conversation (markdown paragraphs, tables, headings) comes first and owns every axis; the interface (settings sheet, sidebars, workspace, headings and buttons) offers **a font and a weight** and follows the conversation by default (switchable); code stays its own axis
 - **Interface / conversation / code fonts** — three independent fallback lists, Latin families first and CJK after; leaving one empty keeps DSH's own stack untouched
 - **Font-size offsets** — the **conversation** takes -3 ~ +6 px on top of DSH's own "conversation font size" (the official value is the base), moving paragraphs, headings and line heights together — and it is applied **once, at the source** (H1/H2/H3 all derive from the same delta, so the hierarchy holds at any offset and no heading comes out smaller than expected); code is its own axis at -3 ~ +6 px. **The interface has no size axis**: verified against DSH, the settings sheet, sidebars and workspace size their text in upstream CSS, and the only official size hook is the conversation one
-- **Font-weight offsets** — the **conversation**, the **interface** and **code** all take the same **relative offset** (-100 ~ +200, unset reads 0 and the readout is signed): the offset is added to each element's **own** weight, so the heading hierarchy DSH ships (h1~h3 700, h4~h6 and bold 600, table head 500, body 400) survives in both directions — headings stay clearly bolder than body text at any setting, and bold text inside a code surface stays bold. The interface offset is one rule over `body` plus an element table, with the whole conversation markdown subtree excluded: measured against computed styles on a live page, it takes every interface text element to the target and moves nothing inside the markdown subtree, so **changing the interface weight never touches the conversation**. The slider **counts steps**: the readout is the step count (for example `-1 0 +1`) and **the font decides how many there are** — the card measures how many distinct weights the chosen family can render for body text and for bold text, so one step is one pair of neighbouring faces and the range ends where those two stop swapping faces (the heading layer stops once it is at its boldest) — every notch is a visible change and the numbers stay small. What is stored is still a weight offset (older values are converted), so changing the font never breaks a setting; a family with only regular and bold offers three positions in total, and continuous control needs a family with more weights or a variable font
+- **Font-weight offsets** — the **conversation**, the **interface** and **code** all take the same **relative offset** (unset reads 0, the readout is signed, and the range is measured for the current font): the offset is added to each element's **own** weight, so the heading hierarchy DSH ships (h1~h3 700, h4~h6 and bold 600, table head 500, body 400) survives in both directions — headings stay clearly bolder than body text at any setting, and bold text inside a code surface stays bold. The interface offset is one rule over `body` plus an element table, with the whole conversation markdown subtree excluded: measured against computed styles on a live page, it takes every interface text element to the target and moves nothing inside the markdown subtree, so **changing the interface weight never touches the conversation**. The slider **counts steps**: the readout is the step count (for example `-1 0 +1`) and **the font decides how many there are** — the card measures how many distinct weights the chosen family can render for body text, and one step is the smallest jump that is **clearly visible** rather than the smallest possible one, the range ending where body text stops swapping faces (bold text and headings stop once they are at their heaviest) — so the control may offer fewer positions than before while every notch is a visible change and the numbers stay small. What is stored is still a weight offset (older values are converted), so changing the font never breaks a setting; a family with only regular and bold offers two positions in total, and continuous control needs a family with more weights or a variable font
 - **Line heights** — the **conversation** uses a ratio (100% ~ 160%), code an additive offset (-4 ~ +8 px); the interface has no line-height axis, for the same reason as size
 - **Code ligatures** — a three-mode switch (default / on / off; browsers enable them by default, turning them off restores `=>` and `!=` as plain characters), plus an advanced `font-feature-settings` value field
 - **Refuse synthetic styles** (off by default, i.e. synthesis is allowed) — turning it on stops the browser from faking italic and bold for CJK faces, which have neither, so marked text stays upright; left off, the browser synthesises by its own rules, which at least gives a visible "bold" step for a family with no bold face
@@ -26,7 +26,7 @@
 
 | Plugin version | Supported DSH versions |
 | --- | --- |
-| **0.3.x** (latest, 0.3.4) | 0.1.7-alpha.1, 0.1.7-alpha.2, 0.1.7-rc.1, 0.1.7-rc.2, 0.2.0-rc.1 |
+| **0.3.x** (latest, 0.3.5) | 0.1.7-alpha.1, 0.1.7-alpha.2, 0.1.7-rc.1, 0.1.7-rc.2, 0.2.0-rc.1 |
 | 0.2.x (0.2.8) | 0.1.5-rc.3, 0.1.7-alpha.1, 0.1.7-alpha.2, 0.1.7-rc.1, 0.1.7-rc.2 |
 
 Each major version lists only its newest patch: defects a feature introduced were fixed in the patches after it, so within a major version the newest patch is the one to use; older patches keep working, because the plugin does not break its existing interfaces.
@@ -63,7 +63,7 @@ Restart DSH once afterwards and open the Web UI; changing settings needs no rest
 - **Switching following off never jumps** — the moment the switch goes off, the interface writes the font and weight offset it was **already showing** into its own fields (that is what it was following), so nothing changes on screen and the sliders continue from there; an axis the conversation does not set clears the interface's own field instead, keeping DSH's default. "Reset" on that field goes back to DSH's own weight (all three weight offsets return to 0)
 - **The interface weight cannot reach the conversation** — it is the one axis that has to cover the whole page (DSH pins its small labels' weights in upstream class rules, which nothing narrower can reach), so it is implemented as a rule with the **whole conversation markdown subtree excluded**: paragraphs, headings and bold text in the conversation are untouched
 - **Weight readouts** — all three weight axes read 0 when unset (the slider sits in the middle); no "unset" wording appears anywhere, and an absolute weight stored by an older version (300 ~ 600) is converted to its equivalent offset on read (400 → 0, 450 → +50), so nothing has to be set again
-- **The weight slider counts steps** — the card measures how many distinct weights the current family can render for body text and for bold text, one step being one pair of neighbouring faces, and the range ending where those two stop swapping faces (the readout is the step count, e.g. `-2 … +2`), so every notch is a visible change and the numbers stay small; changing the family re-measures it
+- **The weight slider counts steps** — the card measures how many distinct weights the current family can render for body text, one step being the smallest jump that is clearly visible rather than the smallest possible one, and the range ending where body text stops swapping faces (bold text and headings stop at their heaviest; the readout is the step count, e.g. `-1 … +2`), so the control may offer fewer positions than before while every notch is a visible change and the numbers stay small; changing the family re-measures it
 - **Presets** — the dropdown select below the edit mode (默认配置 1 ~ 5, with the card's own chevron inside the box); picking one switches and auto-saves the edits that follow. "Rename" renames the current preset, "Export" copies JSON and "Import" merges a paste. Operation results ("copied to the clipboard") appear on the **right** of the row below and fade out by themselves after about 2.6 s, without moving any layout
 - **Preview** — expanding the conversation / interface / code section ends with that section's own preview box, rendering just that part
 - Settings are stored in DSH's settings document (the profile's `cordis.patch.yml` from 0.1.7 on, `settings.yaml` before that), so they travel with the profile

package/README.md

@@ -9,7 +9,7 @@
 - **三套排印**：对话（会话 Markdown 正文、表格与标题）排在第一位、拥有全部轴；界面（设置页、侧栏、工作区与标题按钮）提供**字体与字重**、默认跟随对话（可关）；代码独立成轴
 - **界面 / 对话 / 代码字体** —— 各自独立的字体回退列表，拉丁字体在前、中文字体在后；留空表示完全沿用 DSH 的字体栈
 - **字号偏移** —— **对话**字号 -3 ~ +6 px，加在 DSH 自己的「对话字号」之上（官方数值是基准），段落、标题与行高一起跟随，且**只在源头加一次**（H1/H2/H3 的尺寸都由同一条 delta 派生，任意偏移下层级都不变、也不会出现某个标题偏小）；代码字号独立成轴，-3 ~ +6 px。**界面没有字号轴**：经实测 DSH 的设置页、侧栏与工作区把字号写死在上游 CSS 里，唯一官方字号接口就是「对话字号」
-- **字重偏移** —— **对话、界面与代码都是同一种相对偏移**（-100 ~ +200，未设置即 0、读数按 `+n` / `-n` 显示）：偏移叠加在每个元素**自身的**字重上，标题仍按 DSH 的层级（h1~h3 700、h4~h6 与加粗 600、表头 500、正文 400）逐级保持"标题明显粗于正文"，调重调轻都不会把层级抹平，代码块里的粗体也不会被压平。界面偏移是一条把对话 Markdown 整棵子树排除在外、只铺 `body` 与自带字重的元素表的规则：真机实测（活页面计算样式）它把界面的文本元素改到目标值、对话 markdown 里的元素一个都没动，所以**改界面字重不会碰到对话**。滑块**按档计数**：读数就是档数（例如 `-1 0 +1`），**档数由字体决定**——卡片会在页面里量出所选字体在正文与加粗文字两处实际能渲染出几种粗细，一档就是相邻的两张字形，范围也以这两处还能换到字形为限（标题那一层到顶后停住），所以每挪一格都是看得见的变化，数字也不会出现"几百几百"；换字体会重新测量。文档里存的仍是字重偏移（旧值自动换算），换字体不会把设置改坏；字体只有常规与粗体两档时全范围就只有 3 档，要连续可选用字重档位多的字体或可变字体
+- **字重偏移** —— **对话、界面与代码都是同一种相对偏移**（未设置即 0、读数按 `+n` / `-n` 显示，范围按当前字体实测）：偏移叠加在每个元素**自身的**字重上，标题仍按 DSH 的层级（h1~h3 700、h4~h6 与加粗 600、表头 500、正文 400）逐级保持"标题明显粗于正文"，调重调轻都不会把层级抹平，代码块里的粗体也不会被压平。界面偏移是一条把对话 Markdown 整棵子树排除在外、只铺 `body` 与自带字重的元素表的规则：真机实测（活页面计算样式）它把界面的文本元素改到目标值、对话 markdown 里的元素一个都没动，所以**改界面字重不会碰到对话**。滑块**按档计数**：读数就是档数（例如 `-1 0 +1`），**档数由字体决定**——卡片会在页面里量出所选字体在正文处实际能渲染出几种粗细，一档取**变化足够明显**的那一档（不是最细的那一档），范围到正文再也换不到字形为止（加粗与标题到顶后停住），所以档数可能比之前少，但每挪一格都看得出来，数字也不会出现"几百几百"；换字体会重新测量。文档里存的仍是字重偏移（旧值自动换算），换字体不会把设置改坏；字体只有常规与粗体两档时就只有 2 个档位，要连续可选用字重档位多的字体或可变字体
 - **行高** —— **对话**行高用倍率（100% ~ 160%）；代码行高用加法偏移（-4 ~ +8 px）。界面没有行高轴（同字号的原因）
 - **代码连字** —— 三档开关（默认 / 开启 / 关闭，浏览器默认即开启，关闭可还原 `=>`、`!=` 这类连字），高级模式另有 `font-feature-settings` 特性值输入
 - **拒绝合成样式**（默认关闭 = 允许合成） —— 打开后禁用浏览器为中文伪造的斜体与粗体（中文字体没有斜体字形，浏览器会硬掰）；关着（默认）时由浏览器按自己的规则合成，字体缺粗体字形时至少还能看出"粗体"这一档
@@ -26,7 +26,7 @@
 
 | 插件版本 | 支持的 DSH 版本 |
 | --- | --- |
-| **0.3.x**（最新，0.3.4） | 0.1.7-alpha.1、0.1.7-alpha.2、0.1.7-rc.1、0.1.7-rc.2、0.2.0-rc.1 |
+| **0.3.x**（最新，0.3.5） | 0.1.7-alpha.1、0.1.7-alpha.2、0.1.7-rc.1、0.1.7-rc.2、0.2.0-rc.1 |
 | 0.2.x（0.2.8） | 0.1.5-rc.3、0.1.7-alpha.1、0.1.7-alpha.2、0.1.7-rc.1、0.1.7-rc.2 |
 
 每个大版本只列该系列最新的一个补丁版本（新功能引入的缺陷都在其后的补丁里修掉了，所以同一个大版本内直接用最新补丁即可；旧补丁仍可继续用，插件不破坏既有接口）。
@@ -63,7 +63,7 @@ dsh plugin --profile web add <插件目录路径>
 - **关掉跟随不会跳变** —— 关掉开关的那一刻，界面会把**正在显示的**字体与字重偏移写成自己的值（跟随期间它本来就是这两项），所以画面零变化、滑块从当前值继续调；对话没设的那一项则清掉界面自己的字段、保持 DSH 默认。想回到 DSH 自己的粗细点该项的「重置」（三个字重偏移读数都回到 0）
 - **界面字重不会碰到对话** —— 界面字重是唯一必须铺满整页的轴（DSH 把小标签的粗细写死在上游 CSS 的类规则里，窄规则够不到它），实现上是一条把**对话 Markdown 整棵子树排除在外**的规则，所以对话的段落、标题、粗体都不受影响
 - **字重读数** —— 三个字重轴的未设置读数都显示 0（滑块停在正中）；不会出现「未设置」这类字眼；旧版本存的绝对字重（300 ~ 600）会在读取时自动换算成等价偏移（400 → 0、450 → +50），无需手动重设
-- **字重滑块按档计数** —— 卡片会量出当前字体在正文与加粗文字两处各能渲染出几档粗细，一档 = 相邻两张字形、上下限以这两处还能换字形为限（读数就是档数，如 `-2 … +2`），所以每挪一格都看得出变化、也不会出现"几百几百"的数字；换字体后档数会重新测量
+- **字重滑块按档计数** —— 卡片会量出当前字体在正文处能渲染出几档粗细，一档取**变化足够明显**的那一档（不是最细的那一档）、上下限以正文还能换字形为限（加粗与标题到顶后停住；读数就是档数，如 `-1 … +2`），所以档数可能比之前少、但每挪一格都看得出变化，也不会出现"几百几百"的数字；换字体后档数会重新测量
 - **预设方案** —— 编辑模式下方的下拉选择框（默认配置 1 ~ 5，框内右侧有与卡片一致的下拉箭头），点开选择即切换并自动保存后续改动；「改名」重命名当前方案，「导出」复制 JSON，「导入」粘贴合并。操作结果（如「已复制到剪贴板」）显示在下面那行的**右侧**，约 2.6 秒后自动淡出，不会顶动任何布局
 - **预览** —— 对话 / 界面 / 代码分区展开后，各自分区末尾有一个预览框，只渲染该分区的样式
 - 设置保存在 DSH 的设置文档里（0.1.7 起是 profile 的 `cordis.patch.yml`，更早的版本是 `settings.yaml`），跟随 profile 走