dsh-film 0.3.4 → 0.3.5

package/README.md

@@ -37,7 +37,7 @@ A film workbench for DeepSeek Harness and VibeDev: three right-sidebar tabs —
 **从 GitHub Release 安装**：插件页的“包名或地址”和上面的命令也接受 Release 里的 `.tgz` 直链，例如
 
 ```
-https://github.com/VibeDev-Si/dsh-film/releases/download/v0.3.4/dsh-film-0.3.4.tgz
+https://github.com/VibeDev-Si/dsh-film/releases/download/v0.3.5/dsh-film-0.3.5.tgz
 ```
 
 直链不经过安装源，需要本机能直接访问 GitHub（或配好代理）。包约 3 MB。网速很慢时仍可能超过 pnpm 默认的 60 秒下载时限而失败：这时改为按包名从中国大陆镜像源安装；也可以把时限调长：pnpm 11（DeepSeek Harness 和 VibeDev 桌面版自带的就是它）不再从 `~/.npmrc` 读取这个设置，要在 pnpm 的全局配置 `config.yaml` 里加一行 `fetchTimeout: 600000`（Windows：`%LOCALAPPDATA%\pnpm\config\config.yaml`；macOS：`~/Library/Preferences/pnpm/config.yaml`；Linux：`~/.config/pnpm/config.yaml`），或设环境变量 `pnpm_config_fetch_timeout=600000`；pnpm 10 及更早的版本则在 `~/.npmrc` 里加 `fetch-timeout=600000`。
@@ -56,13 +56,22 @@ Requires DeepSeek Harness 0.2.x or VibeDev (VibeDev Next), which is built on it.
 
 - **Plugin page** (recommended): Plugins → Add plugin → install a third-party plugin by package name, enter `dsh-film`, pick the npm registry or the China mirror under the install source, and install.
 - **Command line**: for the DeepSeek Harness desktop app, quit it fully, then run `dsh plugin --profile desktop add dsh-film` (the `dsh` command is installed from the app menu). VibeDev Next's command is `vibedev-app` (app menu → Manage vibedev-app Command…): quit the app fully, then run `vibedev-app plugin --profile desktop add dsh-film`; it keeps its data in `~/.vibedev-app`, which `dsh` does not reach. With the npm `dsh` CLI, run `dsh plugin add dsh-film`.
-- **GitHub Release**: the plugin page and the commands also take the release asset URL, e.g. `https://github.com/VibeDev-Si/dsh-film/releases/download/v0.3.4/dsh-film-0.3.4.tgz`. It is fetched straight from GitHub, not through a registry. The file is about 3 MB; if a very slow connection still hits pnpm's default 60-second fetch timeout, install by name from the mirror instead, or raise the timeout — pnpm 11 (the one the desktop apps ship) no longer reads it from `~/.npmrc`, so add `fetchTimeout: 600000` to pnpm's global `config.yaml` (Windows `%LOCALAPPDATA%\pnpm\config\config.yaml`, macOS `~/Library/Preferences/pnpm/config.yaml`, Linux `~/.config/pnpm/config.yaml`) or set `pnpm_config_fetch_timeout=600000`; pnpm 10 and earlier take `fetch-timeout=600000` in `~/.npmrc`.
+- **GitHub Release**: the plugin page and the commands also take the release asset URL, e.g. `https://github.com/VibeDev-Si/dsh-film/releases/download/v0.3.5/dsh-film-0.3.5.tgz`. It is fetched straight from GitHub, not through a registry. The file is about 3 MB; if a very slow connection still hits pnpm's default 60-second fetch timeout, install by name from the mirror instead, or raise the timeout — pnpm 11 (the one the desktop apps ship) no longer reads it from `~/.npmrc`, so add `fetchTimeout: 600000` to pnpm's global `config.yaml` (Windows `%LOCALAPPDATA%\pnpm\config\config.yaml`, macOS `~/Library/Preferences/pnpm/config.yaml`, Linux `~/.config/pnpm/config.yaml`) or set `pnpm_config_fetch_timeout=600000`; pnpm 10 and earlier take `fetch-timeout=600000` in `~/.npmrc`.
 - **A fresh release**: pnpm 11 installs only versions published at least a day ago (`minimumReleaseAge`). The very first version is not held back: installing by name a package with no earlier version installs it and adds it to `minimumReleaseAgeExclude`. After each later release, an install by name gets the previous version for a day; to get the new one at once, install the exact version (`dsh-film@<version>`) or use the release URL.
 - **Not from the git repository**: `lib/`, `client/` and `apps/` (the storyboard and director desk front ends) are build outputs that are not in git, so installing from the repository URL fails (it does not leave a plugin that cannot work).
 - **The VibeDev account & models plugin is optional**: only image and video generation on the storyboard needs [@vibedev-si/dsh-vibedev](https://github.com/VibeDev-Si/dsh-vibedev) (formerly dsh-media; sign in to VibeDev at the bottom of the sidebar or in Settings → VibeDev account). Everything else works without it; installing the workbench from the VibeDev Plugin Center installs it too. The storyboard lists for each video model the modes that plugin accepts: lanes that declare no first frame (Seedance 2.5 (VibeDev), 2.5 30s (VibeDev), 2.5 480p 30s (山海) and the three lec lanes; Seedance 2.5 特价按次 takes a first frame and keeps image-to-video) offer no image-to-video, and a single image goes as a 全能参考 (multi-reference) reference image instead, also for nodes saved as image-to-video earlier.
 
 Then open the right sidebar of a session that has a workspace and pick a part on its start page. The first time a film tab opens, the plugin creates the film — named after the workspace folder, 16:9, with an empty storyboard — with no form to fill in. Rename it and pick its frame in the header the three tabs share: click the title to edit it (up to 80 characters; Enter or clicking away saves, Esc cancels); the frame is the film's aspect ratio, which the storyboard canvas and the director desk use (16:9, 9:16, 1:1, 4:5, 21:9, 2.39:1). A 4:3 film made by 0.1.0 keeps and shows its frame. To upgrade, install the new version over the old one (no need to uninstall first), then restart DeepSeek Harness / VibeDev: until you do, the workbench shows a banner asking for the restart and does not open the storyboard or the director desk. Your film stays in the workspace's `film/` folder either way.
 
+### 0.3.5 版本说明 · 0.3.5 release note
+
+- **官方旧桌面（旧转发）下的「兼容播放」**：官方 DSH 旧转发让播放器学不到可定位区间（进度条点不动、无法拖动）时，视频节点和放大预览会多一个「兼容播放」按钮；用户点一次才**完整读取当前视频**，读完按播放键即可播放并拖动进度。**读取会临时占用与视频大小相当的内存**（构造时还会额外占用，具体以浏览器实际占用为准），**读取中可以取消，取消、失选、换源或离开节点都会中止并释放**；画布保存的原始视频地址一字不改。正常 Web（VibeDev 与普通 http 转发）不出现这个入口，播放与拖动照旧走流式范围请求。本版覆盖**视频节点、放大预览、字幕编辑器预览与裁剪条胶片条**（读取后胶片条不再是全第一帧）。
+- **仍未适配**：离屏截帧（截帧/出片）与拼接、截取、音频等编辑对话框各自持有播放器元素，在官方旧转发下仍可能无法定位进度，留待后续。
+- 0.3.4 的范围响应修复继续生效：一次范围请求按客户端要求完整返回（开放式、有限段、后缀尾段），流式且可取消。
+
+- **A "Prepare playback" entry for the official shell's old forwarding**: when the official DSH's old forwarding leaves the player with no seekable range (the progress bar cannot be dragged), a video node and its enlarged preview gain a "Prepare playback" button. One click **reads the whole video once**; after that, the play button plays it and the progress bar can be scrubbed. **The read temporarily holds memory comparable to the video's size** (assembling it takes more; the browser's actual usage decides), **it can be cancelled, and cancelling, deselecting, switching the source or leaving the node aborts and releases it**; the board's saved video address is never rewritten. Normal web (VibeDev and plain http forwarding) shows no such entry — play and seek keep using streaming range requests. This version covers the **video node, the enlarged preview, the subtitle editor's preview and the trim bar's filmstrip** (frames are no longer all the first frame once the file is read).
+- **Not adapted yet**: offscreen frame capture (frames/export) and the join, cut and audio dialogs each hold their own media element; on the old forwarding they may still be unable to seek. Follow-up.
+
 ### 0.3.4 版本说明 · 0.3.4 release note
 
 - **视频读取范围修复**：媒体服务完整返回播放器所请求的单个字节区间，取消把请求主动截短到 8 MiB 的行为。原片的尾部索引因此能正常读取；响应继续从文件流式发送，客户端断开即停止，不重编码、不替换素材。桌面视频跳转还需要 VibeDev Next 的未压缩响应长度保留修复，两者配合验收。

package/apps/canvas/assets/{highlighted-body-OFNGDK62-BrKQ1b3K.js → highlighted-body-OFNGDK62-BVsX5sK_.js}

@@ -1 +1 @@
-import{r,R as x,L as d,j as f,A as p}from"./index-C_MTtFXn.js";var N=({code:i,language:e,raw:a,className:u,startLine:n,lineNumbers:g,...m})=>{let{shikiTheme:l}=r.useContext(x),s=d(),[h,t]=r.useState(a);return r.useEffect(()=>{if(!s){t(a);return}let o=s.highlight({code:i,language:e,themes:l},c=>{t(c)});o&&t(o)},[i,e,l,s,a]),f.jsx(p,{className:u,language:e,lineNumbers:g,result:h,startLine:n,...m})};export{N as HighlightedCodeBlockBody};
+import{r,R as x,L as d,j as f,A as p}from"./index-B1ocSiaC.js";var N=({code:i,language:e,raw:a,className:u,startLine:n,lineNumbers:g,...m})=>{let{shikiTheme:l}=r.useContext(x),s=d(),[h,t]=r.useState(a);return r.useEffect(()=>{if(!s){t(a);return}let o=s.highlight({code:i,language:e,themes:l},c=>{t(c)});o&&t(o)},[i,e,l,s,a]),f.jsx(p,{className:u,language:e,lineNumbers:g,result:h,startLine:n,...m})};export{N as HighlightedCodeBlockBody};