dsh-connect-trae 4.0.0 → 4.0.1

package/CHANGELOG.md

@@ -1,5 +1,41 @@
 # Changelog
 
+## 4.0.1 (2026-10-19)
+
+> CN 区模型卡「最大输出」整列空白（issue #42）修复：上游**是**发布输出上限的——`get_detail_param` 的
+> CN 80 个 config **80/80** 都带 `model_detail_list[].max_tokens`——但目录合并 `mergeTraeModelSources()`
+> 把 wire 侧的 `maxTokens` 丢掉了。这个字段从合并函数诞生那天（1.1.0）起就没被复制过，卡片、
+> `/models/refresh` 与 DSH 模型注册因此永远收到「未知」。附带落地同一 issue 的批量请求：整区上下文
+> 一键切换两个按钮。
+
+### 修复
+
+- **目录合并带上 wire 的 `max_tokens`**（`fix(catalog)`）。合并时其余字段（contextWindow / maxContextWindow /
+  倍率 / reasoning / multimodal / config_name）一路都复制了，唯独漏了 `maxTokens` 一行。修复后 CN 实测
+  32 行目录 30 行带值；**仍空白的行是诚实的**——`kimi-k2.8-preview`、`qwen3.8-flash` 这类 TraeCode 通道行
+  在 SOLO 名单里没有对应 config，拿不到候选值，宁空白不编造。取值链其余部分不动：`collectModels` 读
+  `model_detail_list[0]` 实测无损（71/80 config 的双项 `__dev`/`__max` 上限恒等）。该值是**元数据**，
+  请求体照旧不下发 `max_tokens`（上限由 Trae 服务端决定），行为无变化。
+- 报告人「想确认的一点」（输出上限是否挂在后面的 detail 项或别的键）已逐项 dump 排除，全文见
+  `docs/ISSUE42_DIAGNOSIS.md`，取证脚本 `scripts/probe-cn-maxtokens.mjs`（只读，随仓库提交）。
+
+### 新增
+
+- **卡片模型管理区两个批量上下文按钮**（`feat(card)`，issue #42 附带需求）：「**整区切到 Max**」给本区
+  每个带 Max 档的模型一次性写入其 `maxContextWindow`（正是 `applyContextBudgets` 认的精确值），
+  没有 Max 档的行不动、已有手动预算保留；「**全部恢复默认上下文**」清空本区预算。二者作用于草稿、
+  按「保存」生效，落盘形状与逐行单选完全一致——因此**没有**新增 `contextBudgetMode` 配置键，
+  运行时零新分支、旧配置零迁移。报告人数的 18 次点击现在是一次。
+- README 新增「最大输出与上下文预算」一节（issue #42 建议 1 换内容采纳：事实已变，文档写明上游发布该值、
+  空白行另有其因）。
+
+### 测试
+
+- 新增合并回归用例（修复前必红：wire 行带 `maxTokens` → 合并行必须保留；join-miss 行必须缺席）与
+  5 例卡片用例（批量按钮的落盘内容、既有手动预算的保留、两按钮各自禁用条件）。
+- 全仓 **901** 例通过，0 skipped；`tsc` 两个工程干净；`build` 通过。修复前后各跑一次实时探针对照
+  （0/32 → 30/32）。
+
 ## 4.0.0 (2026-10-19)
 
 > 移除 issue #29 的「跟随 Trae 桌面端当前登录」整套机制，连同它派生的两处 UI。

package/README.en.md

@@ -127,6 +127,12 @@ That is the upstream refusal stated plainly, rather than a silent failure or som
 
 To use these three models today, use the **Trae IDE itself**.
 
+## Max output and context budgets
+
+The "最大输出" (max output) on the model card comes from `model_detail_list[].max_tokens` in Trae's `get_detail_param` — upstream **does** publish it (live-verified: 80/80 CN configs carry it). As of 4.0.1 the value travels through the catalog merge all the way to the card, `/models/refresh` and DSH model registration; before that the merge step dropped the field, so the whole region rendered blank (issue #42 — full diagnosis in `docs/ISSUE42_DIAGNOSIS.md`). **Rows that are still blank are being honest**: models the directory lists but the SOLO roster has no config for (the three TraeCode rows above) have no candidate value to show — we prefer a blank over an invented cap. The value is metadata only; the plugin never puts `max_tokens` into request bodies (the server decides the real cap).
+
+Context windows are a per-model choice between Trae's default (dev) window and its Max window, stored per panel as `contextBudgets`. For a whole-region switch, the model section now has two buttons: "**Switch all to Max**" (writes each Max-capable row's `maxContextWindow`, leaves no-Max rows and existing manual budgets alone) and "**Restore default context**" (clears the region's budget dict). Both act on the draft and take effect on Save, producing exactly the same stored shape as the per-row radios (issue #42 side request — 18 Max rows in CN used to mean 18 clicks).
+
 ## Install
 
 ```sh

package/README.md

@@ -140,6 +140,12 @@ Trae does not serve this model under the SOLO function the request used
 
 如果你现在就要用这 3 个模型，请直接在 **Trae IDE 本体**中使用。
 
+## 最大输出与上下文预算
+
+模型卡上的「最大输出」来自 Trae `get_detail_param` 的 `model_detail_list[].max_tokens` —— 上游**是**发布这个值的（CN 实测 80/80 config 都带）。4.0.1 起它随目录合并一路带到卡片、`/models/refresh` 与 DSH 模型注册；此前合并层漏传了这个字段，整区模型全部显示空白（issue #42，诊断见 `docs/ISSUE42_DIAGNOSIS.md`）。**仍然空白的行是诚实的**：目录里有、但 SOLO 名单里没有对应 config 的模型（上面那 3 个 TraeCode 通道行）拿不到任何候选值，宁可空白也不编一个上限。这个值是元数据，插件不把它写进请求体（输出上限由 Trae 服务端决定）。
+
+上下文窗口在 Trae 公布的默认（dev）档与 Max 档之间二选一，按面板逐模型存成 `contextBudgets`。想整区一次切换：模型管理区有「**整区切到 Max**」（给每个带 Max 档的行写入其 `maxContextWindow`，没有 Max 档的行不动）和「**全部恢复默认上下文**」（清空本区预算）两个按钮，作用在草稿上、按「保存」生效，与逐行单选落盘的结果完全一致（issue #42 附带需求——CN 有 18 个 Max 模型，以前要点 18 次）。
+
 ## 安装
 
 推荐使用 DSH 插件命令安装 npm 已发布版本：

package/lib/client.js

@@ -679,6 +679,10 @@ window.__ModuleLoader__.load({
   color:var(--dsw-alias-brand-primary,#2563eb);font-size:11px;line-height:16px;
 }
 .dsm-trae-models-hint{margin:4px 0 0;color:var(--dsw-alias-label-tertiary,#999);font-size:11px;line-height:16px}
+/* Bulk context-budget row (issue #42): under the model list, above the
+   capability note. Wraps on narrow cards; keeps the two buttons visually a
+   pair and distinct from the save footer below. */
+.dsm-trae-context-bulk{display:flex;flex-wrap:wrap;gap:8px;margin-top:10px}
 /* Verdict badge. Only a real refusal is coloured as a warning; an unknown
    verdict stays neutral because an inconclusive probe is not evidence against
    the model. */
@@ -3879,6 +3883,39 @@ window.__ModuleLoader__.load({
 					};
 				});
 			};
+			/**
+			* Bulk context-budget switch (issue #42 side request). The per-model radios
+			* stay exactly as they are; these two act on the whole region draft at once.
+			* The reporter counted 18 CN models whose Max window differs from the
+			* default and described clicking 18 times per region — 「整区切到 Max」 is
+			* those 18 clicks as one button. It writes `maxContextWindow` per row, which
+			* is precisely the spelling `applyContextBudgets` recognizes (a budget equal
+			* to the native Max window widens the effective window), so bulk and per-row
+			* paths land on identical saved state. Models without a Max window are left
+			* untouched — inventing a budget for them would be filtered out anyway.
+			*/
+			const setAllContextMax = () => {
+				editDraft((current) => {
+					const next = { ...current.contextBudgets };
+					for (const model of current.models) if (model.maxContextWindow !== void 0) next[model.id] = model.maxContextWindow;
+					return {
+						...current,
+						contextBudgets: next
+					};
+				});
+			};
+			/**
+			* 「恢复默认上下文」 clears every override in this region's draft. Empty
+			* dict = every row falls back to its default window (the same state as a
+			* region that was never configured), and clearing is what makes the bulk
+			* action reversible without 18 more clicks.
+			*/
+			const resetAllContextBudgets = () => {
+				editDraft((current) => ({
+					...current,
+					contextBudgets: {}
+				}));
+			};
 			const discardModels = () => {
 				setDrafts((prev) => {
 					const next = { ...prev };
@@ -4589,6 +4626,24 @@ window.__ModuleLoader__.load({
 													})]
 												}, model.id))
 											}),
+											/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("div", {
+												className: "dsm-trae-context-bulk",
+												children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("button", {
+													type: "button",
+													className: "dsm-btn dsm-btn-outline",
+													disabled: busy || saving || settingsScope?.getSnapshot().writable !== true || !visibleModels.some((model) => model.maxContextWindow !== void 0),
+													title: t("row.contextAllMaxHint"),
+													onClick: setAllContextMax,
+													children: t("row.contextAllMax")
+												}), /* @__PURE__ */ (0, react_jsx_runtime.jsx)("button", {
+													type: "button",
+													className: "dsm-btn dsm-btn-outline",
+													disabled: busy || saving || settingsScope?.getSnapshot().writable !== true || Object.keys(activeContextBudgets).length === 0,
+													title: t("row.contextAllDefaultHint"),
+													onClick: resetAllContextBudgets,
+													children: t("row.contextAllDefault")
+												})]
+											}),
 											/* @__PURE__ */ (0, react_jsx_runtime.jsx)("p", {
 												className: "dsm-trae-model-capability-note",
 												children: t("row.modelCapabilityPending")
@@ -5507,6 +5562,10 @@ window.__ModuleLoader__.load({
 			"row.expiryEarliest": "Earliest: {time}",
 			"row.settingsDirty": "Unsaved changes",
 			"row.modelsTestEmpty": "Enable at least one model first.",
+			"row.contextAllMax": "Switch all to Max",
+			"row.contextAllMaxHint": "Sets the DSH context budget of every model in this region that has a Max window to its Max window at once. Still a draft — press Save to apply. Models without a Max window are left alone.",
+			"row.contextAllDefault": "Restore default context",
+			"row.contextAllDefaultHint": "Clears every context-budget override in this region, so all models go back to Trae's default window. Still a draft — press Save to apply.",
 			"row.modelsTestError": "Test failed: {message}",
 			"row.modelsTestDone": "{available} of {total} answered.",
 			"row.probeAvailable": "works",
@@ -5823,6 +5882,10 @@ window.__ModuleLoader__.load({
 			"row.expiryEarliest": "最早到期：{time}",
 			"row.settingsDirty": "有未保存的修改",
 			"row.modelsTestEmpty": "请先启用至少一个模型。",
+			"row.contextAllMax": "整区切到 Max",
+			"row.contextAllMaxHint": "把本区所有带 Max 档的模型的 DSH 上下文预算一次性设为各自的 Max 档。这只是草稿——要按「保存」才生效。没有 Max 档的模型不会被改动。",
+			"row.contextAllDefault": "全部恢复默认上下文",
+			"row.contextAllDefaultHint": "清掉本区所有上下文预算覆盖，让每个模型都回到 Trae 的默认窗口。这只是草稿——要按「保存」才生效。",
 			"row.modelsTestError": "测试失败：{message}",
 			"row.modelsTestDone": "{total} 个里有 {available} 个正常应答。",
 			"row.probeAvailable": "可用",

package/lib/index.js

@@ -242,6 +242,7 @@ function mergeTraeModelSources(remote, wire) {
 			...model.maxContextWindow === void 0 ? {} : { maxContextWindow: model.maxContextWindow },
 			...creditMultiplier === void 0 ? {} : { creditMultiplier },
 			input: ["text"],
+			...wireModel?.maxTokens === void 0 ? {} : { maxTokens: wireModel.maxTokens },
 			...model.multimodal === void 0 ? {} : { multimodal: model.multimodal },
 			reasoningSupported: model.reasoningSupported,
 			...model.reasoning === void 0 ? {} : {

package/package.json

@@ -2,7 +2,7 @@
   "name": "dsh-connect-trae",
   "displayName": "DSH Connect Trae",
   "description": "把本机登录的 Trae 模型接入 DeepSeek Harness：国内版与国际版双供应商并行，提供用量/积分概览与每日签到领取。",
-  "version": "4.0.0",
+  "version": "4.0.1",
   "author": "dingminhua",
   "copyright": "Copyright (c) 2026 LaoDing",
   "license": "MIT",