dsh-autotier 0.2.13 → 0.2.14

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (7) hide show
  1. package/CHANGELOG.md +8 -0
  2. package/README-es.md +10 -10
  3. package/README-hi.md +10 -11
  4. package/README-pt.md +10 -10
  5. package/README-zh.md +10 -11
  6. package/README.md +375 -376
  7. package/package.json +17 -17
package/CHANGELOG.md CHANGED
@@ -5,6 +5,14 @@ All notable changes to this project are documented in this file.
5
5
  The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
6
6
  and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
7
7
 
8
+ ## [0.2.14] - 2026-10-06
9
+
10
+ ### Changed
11
+
12
+ - **The declared peer band did not admit the line the package runs on.** The dev/test pins moved to `0.2.1-alpha.1`, but the band was `>=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0`, and under semver's prerelease rule a `0.2.0` tuple cannot admit a `0.2.1` prerelease 鈥?so the line this build is measured on was excluded by its own range. A `|| >=0.2.1-0 <0.3.0` clause is appended, exactly as every earlier prerelease tuple gained its own clause. Nothing previously admitted is dropped: the `0.1.6` floor stays where the 0.2.13 entry put it, and the earlier clauses are deliberately not restored.
13
+ - The same clause is added to `engines.dsh`, and the five READMEs state the resulting band (the published tarball still carried the pre-`0.2.0` band).
14
+
15
+
8
16
  ## [0.2.13] - 2026-10-05
9
17
 
10
18
  ### Changed
package/README-es.md CHANGED
@@ -315,24 +315,24 @@ Evidencia estática: `dsh-plugin-doctor` K10–K13 dan `pass` en todas las compr
315
315
 
316
316
  ## PerryLink DSH Plugin Family
317
317
 
318
- This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
318
+ This project is one of the **44 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
319
319
 
320
320
  | Plugin | One-liner |
321
321
  |---|---|
322
322
  | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
323
323
  | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
324
- | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | |
325
- | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | |
324
+ | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | 🚫 **RETIRADO** — ver la nota arriba |
325
+ | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | | 🧊 FROZEN — see the repo README |
326
326
  | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
327
327
  | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
328
328
  | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
329
- | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | |
329
+ | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | | 🧊 FROZEN — see the repo README |
330
330
  | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
331
331
  | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
332
332
  | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
333
- | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | |
333
+ | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
334
334
  | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
335
- | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | |
335
+ | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
336
336
  | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
337
337
  | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
338
338
  | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
@@ -343,7 +343,7 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
343
343
  | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
344
344
  | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
345
345
  | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
346
- | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | |
346
+ | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | | 🧊 FROZEN — see the repo README |
347
347
  | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
348
348
  | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
349
349
  | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
@@ -352,14 +352,14 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
352
352
  | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
353
353
  | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
354
354
  | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
355
- | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | |
355
+ | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | | 🧊 FROZEN — see the repo README |
356
356
  | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
357
357
  | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
358
- | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | |
358
+ | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | 🚫 **RETIRADO** — ver la nota arriba |
359
359
  | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
360
360
  | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
361
361
  | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
362
- | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | |
362
+ | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | 🚫 **RETIRADO** — ver la nota arriba |
363
363
  | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
364
364
  | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
365
365
  | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
package/README-hi.md CHANGED
@@ -308,24 +308,24 @@ Apache-2.0. देखें [LICENSE](./LICENSE) और
308
308
 
309
309
  ## PerryLink DSH Plugin Family
310
310
 
311
- This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
311
+ This project is one of the **44 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
312
312
 
313
313
  | Plugin | One-liner |
314
314
  |---|---|
315
315
  | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
316
316
  | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
317
- | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | |
318
- | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | |
317
+ | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | 🚫 **सेवानिवृत्त** — ऊपर देखें |
318
+ | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | | 🧊 FROZEN — see the repo README |
319
319
  | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
320
320
  | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
321
321
  | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
322
- | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | |
322
+ | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | | 🧊 FROZEN — see the repo README |
323
323
  | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
324
324
  | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
325
325
  | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
326
- | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | |
326
+ | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
327
327
  | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
328
- | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | |
328
+ | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
329
329
  | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
330
330
  | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
331
331
  | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
@@ -336,7 +336,7 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
336
336
  | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
337
337
  | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
338
338
  | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
339
- | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | |
339
+ | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | | 🧊 FROZEN — see the repo README |
340
340
  | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
341
341
  | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
342
342
  | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
@@ -345,15 +345,14 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
345
345
  | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
346
346
  | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
347
347
  | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
348
- | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | |
348
+ | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | | 🧊 FROZEN — see the repo README |
349
349
  | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
350
350
  | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
351
- | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | |
351
+ | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | 🚫 **सेवानिवृत्त** — ऊपर देखें |
352
352
  | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
353
353
  | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
354
354
  | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
355
- | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | |
355
+ | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | 🚫 **सेवानिवृत्त** — ऊपर देखें |
356
356
  | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
357
357
  | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
358
358
  | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
359
-
package/README-pt.md CHANGED
@@ -313,24 +313,24 @@ Evidência estática: `dsh-plugin-doctor` K10–K13 retornam `pass` em todas as
313
313
 
314
314
  ## PerryLink DSH Plugin Family
315
315
 
316
- This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
316
+ This project is one of the **44 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
317
317
 
318
318
  | Plugin | One-liner |
319
319
  |---|---|
320
320
  | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
321
321
  | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
322
- | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | |
323
- | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | |
322
+ | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | 🚫 **APOSENTADO** — ver a nota acima |
323
+ | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | | 🧊 FROZEN — see the repo README |
324
324
  | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
325
325
  | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
326
326
  | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
327
- | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | |
327
+ | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | | 🧊 FROZEN — see the repo README |
328
328
  | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
329
329
  | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
330
330
  | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
331
- | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | |
331
+ | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
332
332
  | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
333
- | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | |
333
+ | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
334
334
  | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
335
335
  | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
336
336
  | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
@@ -341,7 +341,7 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
341
341
  | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
342
342
  | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
343
343
  | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
344
- | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | |
344
+ | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | | 🧊 FROZEN — see the repo README |
345
345
  | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
346
346
  | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
347
347
  | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
@@ -350,14 +350,14 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
350
350
  | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
351
351
  | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
352
352
  | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
353
- | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | |
353
+ | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | | 🧊 FROZEN — see the repo README |
354
354
  | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
355
355
  | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
356
- | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | |
356
+ | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | 🚫 **APOSENTADO** — ver a nota acima |
357
357
  | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
358
358
  | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
359
359
  | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
360
- | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | |
360
+ | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | 🚫 **APOSENTADO** — ver a nota acima |
361
361
  | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
362
362
  | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
363
363
  | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
package/README-zh.md CHANGED
@@ -279,24 +279,24 @@ Apache-2.0。见 [LICENSE](./LICENSE) 与
279
279
 
280
280
  ## PerryLink DSH Plugin Family
281
281
 
282
- This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
282
+ This project is one of the **44 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
283
283
 
284
284
  | Plugin | One-liner |
285
285
  |---|---|
286
286
  | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
287
287
  | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
288
- | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | |
289
- | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | |
288
+ | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | 🚫 **已退役** — 见上方说明 |
289
+ | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | | 🧊 FROZEN — see the repo README |
290
290
  | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
291
291
  | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
292
292
  | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
293
- | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | |
293
+ | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | | 🧊 FROZEN — see the repo README |
294
294
  | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
295
295
  | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
296
296
  | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
297
- | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | |
297
+ | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
298
298
  | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
299
- | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | |
299
+ | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
300
300
  | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
301
301
  | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
302
302
  | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
@@ -307,7 +307,7 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
307
307
  | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
308
308
  | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
309
309
  | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
310
- | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | |
310
+ | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | | 🧊 FROZEN — see the repo README |
311
311
  | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
312
312
  | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
313
313
  | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
@@ -316,15 +316,14 @@ This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryL
316
316
  | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
317
317
  | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
318
318
  | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
319
- | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | |
319
+ | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | | 🧊 FROZEN — see the repo README |
320
320
  | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
321
321
  | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
322
- | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | |
322
+ | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | 🚫 **已退役** — 见上方说明 |
323
323
  | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
324
324
  | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
325
325
  | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
326
- | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | |
326
+ | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | 🚫 **已退役** — 见上方说明 |
327
327
  | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
328
328
  | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
329
329
  | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
330
-
package/README.md CHANGED
@@ -1,376 +1,375 @@
1
- # dsh-autotier
2
-
3
- [![Gitee](https://img.shields.io/badge/Gitee-mirror-c71d23?logo=gitee)](https://gitee.com/perrylink/dsh-autotier)
4
- [![OpenSSF Scorecard](https://api.securityscorecards.dev/projects/github.com/PerryLink/dsh-autotier/badge)](https://api.securityscorecards.dev/projects/github.com/PerryLink/dsh-autotier)
5
- [![License](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](LICENSE)
6
- [![DSH plugin](https://img.shields.io/badge/dsh--plugin-✅-green)](https://github.com/topics/dsh-plugin)
7
- [![dsh-doctor](https://raw.githubusercontent.com/PerryLink/dsh-plugin-doctor/main/badges/PerryLink__dsh-autotier.svg)](https://github.com/PerryLink/dsh-plugin-doctor#verified-徽章)
8
- [![DSH Market](https://raw.githubusercontent.com/2BingLing/dsh-market/master/assets/readme/badge-listed-en.svg)](https://dsh.market/)
9
- [![Node](https://img.shields.io/badge/node-%5E22.19.0%20%7C%7C%20%3E%3D24.0.0-brightgreen.svg)](#)
10
- [![CI](https://img.shields.io/github/actions/workflow/status/PerryLink/dsh-autotier/ci.yml?branch=main&label=CI)](https://github.com/PerryLink/dsh-autotier/actions)
11
- [![Version](https://img.shields.io/github/v/tag/PerryLink/dsh-autotier?label=version)](https://github.com/PerryLink/dsh-autotier/releases)
12
- [![dshfind](https://dshfind.com/api/badge/PerryLink/dsh-autotier?metric=downloads)](https://dshfind.com/plugins/PerryLink/dsh-autotier?ref=badge)
13
-
14
- **English** | [简体中文](README-zh.md) | [Español](README-es.md) | [Português](README-pt.md) | [हिन्दी](README-hi.md)
15
-
16
- Automatic model-tier routing for DeepSeek Harness: one user instruction enters,
17
- one tier decision comes out — no manual model switching.
18
-
19
- Complex intent (architecture, planning, debugging, multi-step engineering) is
20
- planned on the **strong** tier and then implemented on the **cheap** tier.
21
- Simple intent (questions, retrieval, batch chores, daily work) is designed and
22
- implemented on the **cheap** tier directly. While the cheap tier executes,
23
- high-risk tool calls are denied by a deterministic guard, and repeated failures
24
- escalate to the strong tier with a TTL fallback.
25
-
26
- - **Official repository**: <https://github.com/PerryLink/dsh-autotier>
27
- - **npm**: `dsh-autotier` (bare, unscoped)
28
-
29
- <!-- star-cta -->
30
- ## ⭐ 如果它帮到了你
31
-
32
- 这个插件是 [DSH 插件家族](https://github.com/PerryLink)的一员（40+ 个，全部 Apache-2.0）。如果你在用，**给个 star** —— 它不会解锁任何功能，但会让下一个人在搜索里更容易找到它。
33
-
34
- *English:* part of a 40+ plugin family for DeepSeek Harness. If it is useful, **a star helps the next person find it** — nothing is gated behind it.
35
-
36
-
37
- ## Compatibility
38
-
39
- | Harness | Status |
40
- |---|---|
41
- | `@deepseek-ai/dsh` `0.1.2-rc.1` | no longer supported; that line predates the `SettingsForms` contract this plugin now targets |
42
- | `@deepseek-ai/dsh` `0.1.5-rc.2` | no longer supported; the `settings.register` / `settings/updated` contract it exposes was removed upstream |
43
- | `@deepseek-ai/dsh` `0.1.6-alpha.2` | no longer supported; same removal, first line to ship `SettingsForms` |
44
- | `@deepseek-ai/dsh` `0.1.7-rc.2` | **required**; verified against the matching checkout (`typecheck`) and the published packages (`typecheck:ci`, 214 tests) |
45
- | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | peer baseline |
46
-
47
- Peer ranges name all published lines explicitly (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), because a semver range whose only prerelease
48
- comparator sits on an earlier version tuple does not admit a later alpha.
49
- They are refreshed per published wave. The declared range is deliberately wider
50
- than the verified one: it documents what the manifest accepts, not what has been
51
- tested.
52
-
53
- **This release is a breaking adaptation.** The `0.1.6`-generation harness
54
- removed the settings *provider* seam this plugin was built on: the
55
- `@deepseek-ai/dsh-settings-file` package is gone, `ctx.settings` is now
56
- `SettingsForms` (a schema→form projector, with no `register`), and
57
- `settings/updated` no longer exists. There is no shared surface that lets one
58
- plugin observe another plugin's settings document, so no version of this plugin
59
- can support both contracts at once. Configuration now flows through the host's
60
- volatile-config mechanism, and the per-session routing mode — the setting that
61
- actually changes behaviour at runtime — is unchanged.
62
-
63
- The plugin is host-plane only. It needs no agent preset of its own: the host
64
- row applies to every session. A one-line prompt section in *your* preset is
65
- optional and only makes the router's decisions visible to the model (see
66
- [Install & uninstall](#install--uninstall)).
67
-
68
- ## What you get
69
-
70
- - **Intent gate** — every turn is classified from deterministic signals
71
- (message text, tool names, image presence, conversation length). The
72
- zero-token rule layer decides when it is confident; only a low-confidence turn
73
- calls the cheap judge model, and never on a cooldown.
74
- - **Tier landing on the official seam** — the decision is applied on the
75
- `agent/request` waterfall by returning a replacement provider/model/effort
76
- triple. Sampling scalars the session already chose (`temperature`, `maxTokens`,
77
- `stop`) are preserved.
78
- - **Plan-mode handoff** — a complex instruction enters plan mode on the strong
79
- tier; leaving plan mode drops back to the cheap tier for implementation.
80
- - **High-risk guard** — while the cheap tier executes, destructive commands
81
- (`rm -rf`, `sudo`, `mkfs`, `git push --force`, credential-file writes, …) are
82
- denied with a corrective message telling the model to escalate instead.
83
- - **Failure escalation** — repeated failures (optionally same-signature) raise
84
- the tier for a TTL; a model/route failure walks the configured fallback chain.
85
- - **Manual escape hatches** — `/tier auto|strong|cheap|off` and the
86
- `tier_status` / `tier_route` tools. Setting `routingMode: delegated` (or
87
- `/tier off`) stops routing for a session that must keep its own model.
88
- - **`ctx.autotier` service** — a small read surface (`status`) plus the
89
- `autotier/route` veto waterfall and `autotier/tier-changed` event, so other
90
- plugins can observe or override a decision.
91
-
92
- ## Quick start
93
-
94
- ```bash
95
- dsh plugin --profile web add dsh-autotier
96
- npm i -g dsh1024
97
- dsh1024 plugin --profile web add dsh-autotier
98
- ```
99
-
100
- Then start (or restart) the harness. The row is appended to your profile's
101
- `cordis.patch.yml`; routing starts on the next turn with no further setup.
102
-
103
- ## Install & uninstall
104
-
105
- **npm channel**
106
-
107
- ```bash
108
- dsh plugin --profile web add dsh-autotier
109
- npm i -g dsh1024
110
- dsh1024 plugin --profile web add dsh-autotier
111
- ```
112
-
113
- **git channel**
114
-
115
- ```bash
116
- dsh plugin --profile web add "github:PerryLink/dsh-autotier#main"
117
- git clone https://github.com/PerryLink/dsh-autotier.git
118
- cd dsh-autotier && pnpm install && pnpm run build
119
- dsh plugin --profile web add .
120
- ```
121
-
122
- **Optional preset prompt section.** The router works without it. To let the
123
- model know which tier it is running on, add one row to *your* agent preset
124
- (`docs/preset-row.md` has the exact block):
125
-
126
- ```yaml
127
- - insert:
128
- - id: autotier-prompt
129
- name: '@deepseek-ai/dsh-system-prompt'
130
- # sections: [...] — see docs/preset-row.md
131
- ```
132
-
133
- **Uninstall**
134
-
135
- ```bash
136
- dsh plugin --profile web remove dsh-autotier
137
- ```
138
-
139
- The row, its command, its tools and its listeners are all removed with the
140
- plugin. Configuration a user saved through the Plugins page lives in the active
141
- profile patch and belongs to that profile, not to this plugin; removing the row
142
- leaves it there untouched.
143
-
144
- ## Configuration
145
-
146
- Every key is validated at load time; an invalid value fails loudly instead of
147
- silently disabling routing. `cordis.patch.yml` in this repository documents the
148
- same keys inline.
149
-
150
- | Key | Default | Meaning |
151
- |---|---|---|
152
- | `tiers.strong.provider` | `deepseek-official` | Provider for the planning/review tier. |
153
- | `tiers.strong.model` | `deepseek-v4-pro` | Catalog id of the strong model. |
154
- | `tiers.strong.effort` | `high` | Adapter vocabulary `off` \| `low` \| `high` \| `max`. |
155
- | `tiers.strong.followSession` | `false` | `false` = this tier's effort overrides the session's. |
156
- | `tiers.strong.fallback` | `[]` | Ordered provider/model landings when the tier is unavailable. |
157
- | `tiers.cheap.provider` | `deepseek-official` | Provider for the implementation tier. |
158
- | `tiers.cheap.model` | `deepseek-flash` | Catalog id of the cheap model. |
159
- | `tiers.cheap.effort` | `low` | Adapter vocabulary `off` \| `low` \| `high` \| `max`. |
160
- | `tiers.cheap.followSession` | `true` | `true` = inherit the session's effort so an explicit choice wins. |
161
- | `tiers.cheap.fallback` | `[]` | Ordered provider/model landings when the tier is unavailable. |
162
- | `tiers.vision.provider` | `deepseek-official` | Provider for image-carrying turns. |
163
- | `tiers.vision.model` | `deepseek-flash` | The catalog's image-capable model. |
164
- | `intent.ruleThreshold` | `0.7` | Confidence at or above which the rule layer decides alone. |
165
- | `intent.attemptBand.enabled` | `false` | Start the middle band on the cheap tier and escalate on a signal. |
166
- | `intent.attemptBand.tauLow` | `0.45` | Lower bound of the attempt-first band. |
167
- | `intent.hysteresis.toStrong` | `0.8` | Score that switches a cheap turn to strong. |
168
- | `intent.hysteresis.toCheap` | `0.6` | Score below which a strong turn returns to cheap. |
169
- | `intent.rules` | `[]` | Declarative rule table (`when.patterns` / `when.tools` / `when.cwd`, `tier`, `priority`). |
170
- | `intent.judge.enabled` | `true` | Allow the low-confidence judge. |
171
- | `intent.judge.model` | `''` | Judge model id; empty = first catalog model containing `flash`. |
172
- | `intent.judge.temperature` | `0` | Judge sampling temperature. |
173
- | `intent.judge.maxTokens` | `16` | Judge output cap (it answers with one word). |
174
- | `intent.judge.cooldownMs` | `30000` | Minimum gap between two judge calls. |
175
- | `intent.judge.timeoutMs` | `2000` | Judge call timeout. |
176
- | `intent.judge.unavailableSkip` | `2` | Consecutive judge failures after which the turn skips it. |
177
- | `intent.scenarios` | all `true` | Per-scenario switches: `coding`, `review`, `planning`, `retrieval`, `batch`, `daily`, `longText`, `multimodal`. |
178
- | `intent.costMode` | `balanced` | Ambiguity arbitration: `cost-first` \| `quality-first` \| `balanced`. |
179
- | `guard.enabled` | `true` | Enable the deterministic high-risk guard. |
180
- | `guard.tiers` | `[cheap]` | Tiers the guard protects. |
181
- | `guard.whitelist` | `[]` | Commands, tools or path prefixes that never trip the guard. |
182
- | `guard.protectedPaths` | `['.dsh','AGENTS.md','package.json','.github/workflows']` | Self-modification surfaces that force strong-tier review. |
183
- | `guard.interopDefend` | `auto` | Relationship with `dsh-defend`: `auto` audits coexistence, `none` stays silent. |
184
- | `escalation.threshold` | `2` | Failures within the window that raise the tier. |
185
- | `escalation.windowMs` | `60000` | Failure-counting window. |
186
- | `escalation.ttlMs` | `180000` | How long an escalation stays in effect. |
187
- | `escalation.fallbackTtlMs` | `300000` | TTL used after a fallback landing was taken. |
188
- | `escalation.signature` | `true` | Count same-signature recurrences instead of every failure. |
189
- | `routingMode` | `auto` | `auto` \| `strong` \| `cheap` \| `delegated` \| `off`. |
190
-
191
- All keys can also be edited live from the plugin's card on the Plugins page; the
192
- Host validates the new value against the schema and commits it with
193
- `loader/volatile-update`, and this plugin then re-judges the whole configuration
194
- through the same cross-field judge the mount path uses. A value that violates a
195
- cross-field requirement (two tiers landing on the same route, a hysteresis pair
196
- that cannot stop flapping, a rule with neither a pattern nor a tool) leaves the
197
- last good policy routing instead of swapping in something unroutable.
198
-
199
- `routingMode` is the one key that is **not** live: it is the composition
200
- default, and the runtime switch is the session-scoped override written by
201
- `/tier`, the composer pill and the card's selector. Making it live as well would
202
- give the same behaviour two owners.
203
-
204
- ## Tools & surfaces
205
-
206
- | Surface | Kind | Purpose |
207
- |---|---|---|
208
- | `/tier` | command | `auto` \| `strong` \| `cheap` \| `off` \| `status`; session-scoped override. |
209
- | `tier_status` | tool | Current tier, mode, escalation TTL and guard state. |
210
- | `tier_route` | tool | Route one intent string without sending a request (dry run). |
211
- | `ctx.autotier` | service | `status()` read surface for other plugins. |
212
- | `autotier/route` | serial event | Third parties may veto a proposed tier. |
213
- | `autotier/tier-changed` | emit event | Observability when the effective tier changes. |
214
-
215
- ## Permissions & data
216
-
217
- - **Files** — the plugin reads no file and writes none. Configuration is the
218
- host's: a value saved on the Plugins page is persisted by the Host into the
219
- active profile patch, and this plugin only reads the live snapshot it is
220
- handed.
221
- - **Network** — the only outbound traffic is the judge call, which goes through
222
- the normal `ctx.llm` path and the configured provider.
223
- - **Session log** — the plugin appends no custom session events. The routing
224
- trail is the plugin logger plus the live `autotier/tier-changed` bus event;
225
- the only append it makes is the `plan/mode` fallback when the plan-mode
226
- service is absent. Custom event types are fail-closed on `0.1.2-alpha.1` and
227
- later, so no durable plugin-owned record is written.
228
- - **Secrets** — no credential is read, logged or stored by this plugin.
229
-
230
- ## Security boundaries
231
-
232
- - The guard is a **defence in depth**, not a sandbox. It denies the patterns it
233
- knows on the cheap tier and never weakens `dsh-defend`, the approval service,
234
- or the sandbox policy. Keep those enabled.
235
- - The guard protects only the tiers listed in `guard.tiers` (cheap by default).
236
- A strong-tier turn is not blocked by design: the strong model is the reviewer.
237
- - If the guard itself throws, the call is escalated to the strong tier rather
238
- than allowed — a broken guard must not become an open door.
239
- - `/tier off` disables routing entirely; the harness then behaves exactly as it
240
- did before the plugin was installed.
241
-
242
- ## Known limitations
243
-
244
- - The rule layer is deterministic and therefore finite: a novel phrasing of a
245
- complex request may start on the cheap tier and escalate only after a failure
246
- or a guard denial. The judge call covers the low-confidence middle.
247
- - Escalation is per-agent and in-memory; a harness restart starts from `auto`.
248
- - Tier switching resets the provider prompt cache for the changed request, so
249
- very chatty sessions may see a small cache-miss cost on the switch turn. The
250
- hysteresis thresholds exist to keep that rare.
251
- - The plugin routes conversation requests. Compaction and title generation are
252
- separate host seams; align their own model settings with the cheap tier if you
253
- want the same cost profile (`docs/supporting-lanes.md`).
254
- - `followSession: true` on the cheap tier means an explicit session model choice
255
- wins; in that case the cheap tier cannot force its own model.
256
- - **The Settings card and composer tier pill shipped in 0.2.0.** The card
257
- (routing mode, live tier landings, model catalog) lives in the Plugins settings
258
- section and the pill cycles the session mode from the composer.
259
- - **A model picked in the GUI is not detected automatically.** The router does
260
- not watch the `agent-default-model` document, so switching models there does
261
- not by itself stop routing — use `routingMode: delegated` or `/tier off`.
262
- - **Fingerprint posteriors are in-memory.** They reset on restart and re-learn
263
- from the judge's cold-start fallback; persisting them through the settings
264
- document is planned for v0.2.
265
- - **The attempt-first middle band ships disabled.** `intent.attemptBand.enabled`
266
- stays `false` until the calibration corpus and its metric gate land (v0.2).
267
-
268
- ## Development
269
-
270
- ```bash
271
- pnpm install
272
- pnpm run typecheck # against the local harness checkout type faces
273
- pnpm run typecheck:ci # against the published 0.1.7-rc.2 faces (what CI runs)
274
- pnpm test
275
- pnpm run build
276
- pnpm run verify:self-contained
277
- pnpm run verify:artifacts
278
- pnpm pack
279
- ```
280
-
281
- `pnpm run build` emits `lib/types` (tsc declarations) and `lib/index.js`
282
- (tsdown bundle). Tests use the published host packages directly — real
283
- `Context`, real session/tools/commands services — plus one real Loader
284
- composition over a temporary `cordis.yml`. The `settings` service is the one
285
- stand-in: the host's real `SettingsForms` binds to `configEditor`,
286
- `profileContext` and the Loader's fiber graph, none of which this plugin
287
- consumes, while the plugin's whole contract with it is `configure({ auto })`
288
- plus the Loader's `loader/volatile-update` event.
289
-
290
- ## Interoperability with other DSH plugins
291
-
292
- Verified against **DSH `0.2.0-rc.2`** (the runtime this README ships for) and the high-star plugin set surveyed on 2026-10-05.
293
-
294
- This plugin **does not interfere** with other plugins, including the widely installed high-star ones:
295
-
296
- - **No tool-name collision.** Every tool is namespaced; no bare name owned by a shipped tool or another plugin is registered.
297
- - **No service-key collision.** It provides `autotier`; that key is not a built-in seam and is not provided by any surveyed high-star plugin.
298
- - **No slot collision.** It registers no client slot key, so it cannot contend for a `shadows-shipped-ui` seat.
299
- - **No HTTP route collision.** It registers no `webServer` prefix.
300
- - **No patch-layer collision.** The bundle patch only `insert`s its own row; it never overrides a built-in row's `config`.
301
- - **No global mutation.** It does not patch prototypes, rewrite `process.env`, or replace the global fetch dispatcher.
302
-
303
- **Shared event listeners are non-interfering by construction.** It observes the ordering-sensitive events `agent/created`, `agent/request`, `agent/request-error`, `tools/pre-execute` with `ctx.on()` — Cordis's broadcast registration, where every listener runs and none can starve another. **Every listener here delegates through `next()`**, so the chain is never short-circuited, and a mutation is applied to the value `next()` produced rather than returned in its place:
304
- - `agent/request` — also used by `dsh-agent-teams` (1923★), which short-circuits by throwing without calling `next()`.
305
- - `tools/pre-execute` — also used by `cc-safety-net` (1576★).
306
-
307
- Static evidence: `dsh-plugin-doctor` K10–K13 report `pass` for every check on this repository.
308
-
309
- ## Topics
310
-
311
- `dsh`, `dsh-plugin`, `deepseek-harness`, `deepseek`, `cordis`, `router`,
312
- `model-tier`, `cost`, `auto`.
313
-
314
- ## Contributors
315
-
316
- PerryLink. Issues and pull requests are welcome at
317
- <https://github.com/PerryLink/dsh-autotier/issues>.
318
-
319
- **Applicable DSH version:** verified against `dsh-v0.2.1-alpha.1` (the host release this build targets); requires `>=0.1.7-alpha.1 <0.2.0`.
320
-
321
- ## PerryLink DSH Plugin Family
322
-
323
- This project is one of the **45 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
324
-
325
- | Plugin | One-liner |
326
- |---|---|
327
- | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
328
- | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
329
- | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | |
330
- | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | |
331
- | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
332
- | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
333
- | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
334
- | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | |
335
- | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
336
- | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
337
- | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
338
- | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | |
339
- | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
340
- | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | |
341
- | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
342
- | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
343
- | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
344
- | **[dsh-industry-research](https://github.com/PerryLink/dsh-industry-research)** | Industry research orchestration that seals its deliverables through this plugin's `ctx.researchReport.assemble` | |
345
- | **[dsh-laya](https://github.com/PerryLink/dsh-laya)** | Laya typed decisions (`noul`/`choice`/`score`) as a first-class Cordis service and model-visible tools | |
346
- | **[dsh-library](https://github.com/PerryLink/dsh-library)** | Local document knowledge base for DeepSeek Harness. | |
347
- | **[dsh-local-ai](https://github.com/PerryLink/dsh-local-ai)** | Local-model (Ollama) integration for DeepSeek Harness. | |
348
- | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
349
- | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
350
- | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
351
- | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | |
352
- | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
353
- | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
354
- | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
355
- | **[dsh-plugin-certification](https://github.com/PerryLink/dsh-plugin-certification)** | Community certification registry with repro-checkable grades and badges | |
356
- | **[dsh-plugin-doctor](https://github.com/PerryLink/dsh-plugin-doctor)** | Zero-dependency static + sandbox smoke detector for DSH plugins | |
357
- | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
358
- | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
359
- | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
360
- | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | |
361
- | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
362
- | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
363
- | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | |
364
- | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
365
- | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
366
- | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
367
- | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | |
368
- | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
369
- | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
370
- | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
371
-
372
-
373
- ## License
374
-
375
- Apache-2.0. See [LICENSE](./LICENSE) and
376
- [THIRD_PARTY_NOTICES.md](./THIRD_PARTY_NOTICES.md).
1
+ # dsh-autotier
2
+
3
+ [![Gitee](https://img.shields.io/badge/Gitee-mirror-c71d23?logo=gitee)](https://gitee.com/perrylink/dsh-autotier)
4
+ [![OpenSSF Scorecard](https://api.securityscorecards.dev/projects/github.com/PerryLink/dsh-autotier/badge)](https://api.securityscorecards.dev/projects/github.com/PerryLink/dsh-autotier)
5
+ [![License](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](LICENSE)
6
+ [![DSH plugin](https://img.shields.io/badge/dsh--plugin-✅-green)](https://github.com/topics/dsh-plugin)
7
+ [![dsh-doctor](https://raw.githubusercontent.com/PerryLink/dsh-plugin-doctor/main/badges/PerryLink__dsh-autotier.svg)](https://github.com/PerryLink/dsh-plugin-doctor#verified-徽章)
8
+ [![DSH Market](https://raw.githubusercontent.com/2BingLing/dsh-market/master/assets/readme/badge-listed-en.svg)](https://dsh.market/)
9
+ [![Node](https://img.shields.io/badge/node-%5E22.19.0%20%7C%7C%20%3E%3D24.0.0-brightgreen.svg)](#)
10
+ [![CI](https://img.shields.io/github/actions/workflow/status/PerryLink/dsh-autotier/ci.yml?branch=main&label=CI)](https://github.com/PerryLink/dsh-autotier/actions)
11
+ [![Version](https://img.shields.io/github/v/tag/PerryLink/dsh-autotier?label=version)](https://github.com/PerryLink/dsh-autotier/releases)
12
+ [![dshfind](https://dshfind.com/api/badge/PerryLink/dsh-autotier?metric=downloads)](https://dshfind.com/plugins/PerryLink/dsh-autotier?ref=badge)
13
+
14
+ **English** | [简体中文](README-zh.md) | [Español](README-es.md) | [Português](README-pt.md) | [हिन्दी](README-hi.md)
15
+
16
+ Automatic model-tier routing for DeepSeek Harness: one user instruction enters,
17
+ one tier decision comes out — no manual model switching.
18
+
19
+ Complex intent (architecture, planning, debugging, multi-step engineering) is
20
+ planned on the **strong** tier and then implemented on the **cheap** tier.
21
+ Simple intent (questions, retrieval, batch chores, daily work) is designed and
22
+ implemented on the **cheap** tier directly. While the cheap tier executes,
23
+ high-risk tool calls are denied by a deterministic guard, and repeated failures
24
+ escalate to the strong tier with a TTL fallback.
25
+
26
+ - **Official repository**: <https://github.com/PerryLink/dsh-autotier>
27
+ - **npm**: `dsh-autotier` (bare, unscoped)
28
+
29
+ <!-- star-cta -->
30
+ ## ⭐ 如果它帮到了你
31
+
32
+ 这个插件是 [DSH 插件家族](https://github.com/PerryLink)的一员（40+ 个，全部 Apache-2.0）。如果你在用，**给个 star** —— 它不会解锁任何功能，但会让下一个人在搜索里更容易找到它。
33
+
34
+ *English:* part of a 40+ plugin family for DeepSeek Harness. If it is useful, **a star helps the next person find it** — nothing is gated behind it.
35
+
36
+
37
+ ## Compatibility
38
+
39
+ | Harness | Status |
40
+ |---|---|
41
+ | `@deepseek-ai/dsh` `0.1.2-rc.1` | no longer supported; that line predates the `SettingsForms` contract this plugin now targets |
42
+ | `@deepseek-ai/dsh` `0.1.5-rc.2` | no longer supported; the `settings.register` / `settings/updated` contract it exposes was removed upstream |
43
+ | `@deepseek-ai/dsh` `0.1.6-alpha.2` | no longer supported; same removal, first line to ship `SettingsForms` |
44
+ | `@deepseek-ai/dsh` `0.1.7-rc.2` | **required**; verified against the matching checkout (`typecheck`) and the published packages (`typecheck:ci`, 214 tests) |
45
+ | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | peer baseline |
46
+
47
+ Peer ranges name all published lines explicitly (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), because a semver range whose only prerelease
48
+ comparator sits on an earlier version tuple does not admit a later alpha.
49
+ They are refreshed per published wave. The declared range is deliberately wider
50
+ than the verified one: it documents what the manifest accepts, not what has been
51
+ tested.
52
+
53
+ **This release is a breaking adaptation.** The `0.1.6`-generation harness
54
+ removed the settings *provider* seam this plugin was built on: the
55
+ `@deepseek-ai/dsh-settings-file` package is gone, `ctx.settings` is now
56
+ `SettingsForms` (a schema→form projector, with no `register`), and
57
+ `settings/updated` no longer exists. There is no shared surface that lets one
58
+ plugin observe another plugin's settings document, so no version of this plugin
59
+ can support both contracts at once. Configuration now flows through the host's
60
+ volatile-config mechanism, and the per-session routing mode — the setting that
61
+ actually changes behaviour at runtime — is unchanged.
62
+
63
+ The plugin is host-plane only. It needs no agent preset of its own: the host
64
+ row applies to every session. A one-line prompt section in *your* preset is
65
+ optional and only makes the router's decisions visible to the model (see
66
+ [Install & uninstall](#install--uninstall)).
67
+
68
+ ## What you get
69
+
70
+ - **Intent gate** — every turn is classified from deterministic signals
71
+ (message text, tool names, image presence, conversation length). The
72
+ zero-token rule layer decides when it is confident; only a low-confidence turn
73
+ calls the cheap judge model, and never on a cooldown.
74
+ - **Tier landing on the official seam** — the decision is applied on the
75
+ `agent/request` waterfall by returning a replacement provider/model/effort
76
+ triple. Sampling scalars the session already chose (`temperature`, `maxTokens`,
77
+ `stop`) are preserved.
78
+ - **Plan-mode handoff** — a complex instruction enters plan mode on the strong
79
+ tier; leaving plan mode drops back to the cheap tier for implementation.
80
+ - **High-risk guard** — while the cheap tier executes, destructive commands
81
+ (`rm -rf`, `sudo`, `mkfs`, `git push --force`, credential-file writes, …) are
82
+ denied with a corrective message telling the model to escalate instead.
83
+ - **Failure escalation** — repeated failures (optionally same-signature) raise
84
+ the tier for a TTL; a model/route failure walks the configured fallback chain.
85
+ - **Manual escape hatches** — `/tier auto|strong|cheap|off` and the
86
+ `tier_status` / `tier_route` tools. Setting `routingMode: delegated` (or
87
+ `/tier off`) stops routing for a session that must keep its own model.
88
+ - **`ctx.autotier` service** — a small read surface (`status`) plus the
89
+ `autotier/route` veto waterfall and `autotier/tier-changed` event, so other
90
+ plugins can observe or override a decision.
91
+
92
+ ## Quick start
93
+
94
+ ```bash
95
+ dsh plugin --profile web add dsh-autotier
96
+ npm i -g dsh1024
97
+ dsh1024 plugin --profile web add dsh-autotier
98
+ ```
99
+
100
+ Then start (or restart) the harness. The row is appended to your profile's
101
+ `cordis.patch.yml`; routing starts on the next turn with no further setup.
102
+
103
+ ## Install & uninstall
104
+
105
+ **npm channel**
106
+
107
+ ```bash
108
+ dsh plugin --profile web add dsh-autotier
109
+ npm i -g dsh1024
110
+ dsh1024 plugin --profile web add dsh-autotier
111
+ ```
112
+
113
+ **git channel**
114
+
115
+ ```bash
116
+ dsh plugin --profile web add "github:PerryLink/dsh-autotier#main"
117
+ git clone https://github.com/PerryLink/dsh-autotier.git
118
+ cd dsh-autotier && pnpm install && pnpm run build
119
+ dsh plugin --profile web add .
120
+ ```
121
+
122
+ **Optional preset prompt section.** The router works without it. To let the
123
+ model know which tier it is running on, add one row to *your* agent preset
124
+ (`docs/preset-row.md` has the exact block):
125
+
126
+ ```yaml
127
+ - insert:
128
+ - id: autotier-prompt
129
+ name: '@deepseek-ai/dsh-system-prompt'
130
+ # sections: [...] — see docs/preset-row.md
131
+ ```
132
+
133
+ **Uninstall**
134
+
135
+ ```bash
136
+ dsh plugin --profile web remove dsh-autotier
137
+ ```
138
+
139
+ The row, its command, its tools and its listeners are all removed with the
140
+ plugin. Configuration a user saved through the Plugins page lives in the active
141
+ profile patch and belongs to that profile, not to this plugin; removing the row
142
+ leaves it there untouched.
143
+
144
+ ## Configuration
145
+
146
+ Every key is validated at load time; an invalid value fails loudly instead of
147
+ silently disabling routing. `cordis.patch.yml` in this repository documents the
148
+ same keys inline.
149
+
150
+ | Key | Default | Meaning |
151
+ |---|---|---|
152
+ | `tiers.strong.provider` | `deepseek-official` | Provider for the planning/review tier. |
153
+ | `tiers.strong.model` | `deepseek-v4-pro` | Catalog id of the strong model. |
154
+ | `tiers.strong.effort` | `high` | Adapter vocabulary `off` \| `low` \| `high` \| `max`. |
155
+ | `tiers.strong.followSession` | `false` | `false` = this tier's effort overrides the session's. |
156
+ | `tiers.strong.fallback` | `[]` | Ordered provider/model landings when the tier is unavailable. |
157
+ | `tiers.cheap.provider` | `deepseek-official` | Provider for the implementation tier. |
158
+ | `tiers.cheap.model` | `deepseek-flash` | Catalog id of the cheap model. |
159
+ | `tiers.cheap.effort` | `low` | Adapter vocabulary `off` \| `low` \| `high` \| `max`. |
160
+ | `tiers.cheap.followSession` | `true` | `true` = inherit the session's effort so an explicit choice wins. |
161
+ | `tiers.cheap.fallback` | `[]` | Ordered provider/model landings when the tier is unavailable. |
162
+ | `tiers.vision.provider` | `deepseek-official` | Provider for image-carrying turns. |
163
+ | `tiers.vision.model` | `deepseek-flash` | The catalog's image-capable model. |
164
+ | `intent.ruleThreshold` | `0.7` | Confidence at or above which the rule layer decides alone. |
165
+ | `intent.attemptBand.enabled` | `false` | Start the middle band on the cheap tier and escalate on a signal. |
166
+ | `intent.attemptBand.tauLow` | `0.45` | Lower bound of the attempt-first band. |
167
+ | `intent.hysteresis.toStrong` | `0.8` | Score that switches a cheap turn to strong. |
168
+ | `intent.hysteresis.toCheap` | `0.6` | Score below which a strong turn returns to cheap. |
169
+ | `intent.rules` | `[]` | Declarative rule table (`when.patterns` / `when.tools` / `when.cwd`, `tier`, `priority`). |
170
+ | `intent.judge.enabled` | `true` | Allow the low-confidence judge. |
171
+ | `intent.judge.model` | `''` | Judge model id; empty = first catalog model containing `flash`. |
172
+ | `intent.judge.temperature` | `0` | Judge sampling temperature. |
173
+ | `intent.judge.maxTokens` | `16` | Judge output cap (it answers with one word). |
174
+ | `intent.judge.cooldownMs` | `30000` | Minimum gap between two judge calls. |
175
+ | `intent.judge.timeoutMs` | `2000` | Judge call timeout. |
176
+ | `intent.judge.unavailableSkip` | `2` | Consecutive judge failures after which the turn skips it. |
177
+ | `intent.scenarios` | all `true` | Per-scenario switches: `coding`, `review`, `planning`, `retrieval`, `batch`, `daily`, `longText`, `multimodal`. |
178
+ | `intent.costMode` | `balanced` | Ambiguity arbitration: `cost-first` \| `quality-first` \| `balanced`. |
179
+ | `guard.enabled` | `true` | Enable the deterministic high-risk guard. |
180
+ | `guard.tiers` | `[cheap]` | Tiers the guard protects. |
181
+ | `guard.whitelist` | `[]` | Commands, tools or path prefixes that never trip the guard. |
182
+ | `guard.protectedPaths` | `['.dsh','AGENTS.md','package.json','.github/workflows']` | Self-modification surfaces that force strong-tier review. |
183
+ | `guard.interopDefend` | `auto` | Relationship with `dsh-defend`: `auto` audits coexistence, `none` stays silent. |
184
+ | `escalation.threshold` | `2` | Failures within the window that raise the tier. |
185
+ | `escalation.windowMs` | `60000` | Failure-counting window. |
186
+ | `escalation.ttlMs` | `180000` | How long an escalation stays in effect. |
187
+ | `escalation.fallbackTtlMs` | `300000` | TTL used after a fallback landing was taken. |
188
+ | `escalation.signature` | `true` | Count same-signature recurrences instead of every failure. |
189
+ | `routingMode` | `auto` | `auto` \| `strong` \| `cheap` \| `delegated` \| `off`. |
190
+
191
+ All keys can also be edited live from the plugin's card on the Plugins page; the
192
+ Host validates the new value against the schema and commits it with
193
+ `loader/volatile-update`, and this plugin then re-judges the whole configuration
194
+ through the same cross-field judge the mount path uses. A value that violates a
195
+ cross-field requirement (two tiers landing on the same route, a hysteresis pair
196
+ that cannot stop flapping, a rule with neither a pattern nor a tool) leaves the
197
+ last good policy routing instead of swapping in something unroutable.
198
+
199
+ `routingMode` is the one key that is **not** live: it is the composition
200
+ default, and the runtime switch is the session-scoped override written by
201
+ `/tier`, the composer pill and the card's selector. Making it live as well would
202
+ give the same behaviour two owners.
203
+
204
+ ## Tools & surfaces
205
+
206
+ | Surface | Kind | Purpose |
207
+ |---|---|---|
208
+ | `/tier` | command | `auto` \| `strong` \| `cheap` \| `off` \| `status`; session-scoped override. |
209
+ | `tier_status` | tool | Current tier, mode, escalation TTL and guard state. |
210
+ | `tier_route` | tool | Route one intent string without sending a request (dry run). |
211
+ | `ctx.autotier` | service | `status()` read surface for other plugins. |
212
+ | `autotier/route` | serial event | Third parties may veto a proposed tier. |
213
+ | `autotier/tier-changed` | emit event | Observability when the effective tier changes. |
214
+
215
+ ## Permissions & data
216
+
217
+ - **Files** — the plugin reads no file and writes none. Configuration is the
218
+ host's: a value saved on the Plugins page is persisted by the Host into the
219
+ active profile patch, and this plugin only reads the live snapshot it is
220
+ handed.
221
+ - **Network** — the only outbound traffic is the judge call, which goes through
222
+ the normal `ctx.llm` path and the configured provider.
223
+ - **Session log** — the plugin appends no custom session events. The routing
224
+ trail is the plugin logger plus the live `autotier/tier-changed` bus event;
225
+ the only append it makes is the `plan/mode` fallback when the plan-mode
226
+ service is absent. Custom event types are fail-closed on `0.1.2-alpha.1` and
227
+ later, so no durable plugin-owned record is written.
228
+ - **Secrets** — no credential is read, logged or stored by this plugin.
229
+
230
+ ## Security boundaries
231
+
232
+ - The guard is a **defence in depth**, not a sandbox. It denies the patterns it
233
+ knows on the cheap tier and never weakens `dsh-defend`, the approval service,
234
+ or the sandbox policy. Keep those enabled.
235
+ - The guard protects only the tiers listed in `guard.tiers` (cheap by default).
236
+ A strong-tier turn is not blocked by design: the strong model is the reviewer.
237
+ - If the guard itself throws, the call is escalated to the strong tier rather
238
+ than allowed — a broken guard must not become an open door.
239
+ - `/tier off` disables routing entirely; the harness then behaves exactly as it
240
+ did before the plugin was installed.
241
+
242
+ ## Known limitations
243
+
244
+ - The rule layer is deterministic and therefore finite: a novel phrasing of a
245
+ complex request may start on the cheap tier and escalate only after a failure
246
+ or a guard denial. The judge call covers the low-confidence middle.
247
+ - Escalation is per-agent and in-memory; a harness restart starts from `auto`.
248
+ - Tier switching resets the provider prompt cache for the changed request, so
249
+ very chatty sessions may see a small cache-miss cost on the switch turn. The
250
+ hysteresis thresholds exist to keep that rare.
251
+ - The plugin routes conversation requests. Compaction and title generation are
252
+ separate host seams; align their own model settings with the cheap tier if you
253
+ want the same cost profile (`docs/supporting-lanes.md`).
254
+ - `followSession: true` on the cheap tier means an explicit session model choice
255
+ wins; in that case the cheap tier cannot force its own model.
256
+ - **The Settings card and composer tier pill shipped in 0.2.0.** The card
257
+ (routing mode, live tier landings, model catalog) lives in the Plugins settings
258
+ section and the pill cycles the session mode from the composer.
259
+ - **A model picked in the GUI is not detected automatically.** The router does
260
+ not watch the `agent-default-model` document, so switching models there does
261
+ not by itself stop routing — use `routingMode: delegated` or `/tier off`.
262
+ - **Fingerprint posteriors are in-memory.** They reset on restart and re-learn
263
+ from the judge's cold-start fallback; persisting them through the settings
264
+ document is planned for v0.2.
265
+ - **The attempt-first middle band ships disabled.** `intent.attemptBand.enabled`
266
+ stays `false` until the calibration corpus and its metric gate land (v0.2).
267
+
268
+ ## Development
269
+
270
+ ```bash
271
+ pnpm install
272
+ pnpm run typecheck # against the local harness checkout type faces
273
+ pnpm run typecheck:ci # against the published 0.1.7-rc.2 faces (what CI runs)
274
+ pnpm test
275
+ pnpm run build
276
+ pnpm run verify:self-contained
277
+ pnpm run verify:artifacts
278
+ pnpm pack
279
+ ```
280
+
281
+ `pnpm run build` emits `lib/types` (tsc declarations) and `lib/index.js`
282
+ (tsdown bundle). Tests use the published host packages directly — real
283
+ `Context`, real session/tools/commands services — plus one real Loader
284
+ composition over a temporary `cordis.yml`. The `settings` service is the one
285
+ stand-in: the host's real `SettingsForms` binds to `configEditor`,
286
+ `profileContext` and the Loader's fiber graph, none of which this plugin
287
+ consumes, while the plugin's whole contract with it is `configure({ auto })`
288
+ plus the Loader's `loader/volatile-update` event.
289
+
290
+ ## Interoperability with other DSH plugins
291
+
292
+ Verified against **DSH `0.2.0-rc.2`** (the runtime this README ships for) and the high-star plugin set surveyed on 2026-10-05.
293
+
294
+ This plugin **does not interfere** with other plugins, including the widely installed high-star ones:
295
+
296
+ - **No tool-name collision.** Every tool is namespaced; no bare name owned by a shipped tool or another plugin is registered.
297
+ - **No service-key collision.** It provides `autotier`; that key is not a built-in seam and is not provided by any surveyed high-star plugin.
298
+ - **No slot collision.** It registers no client slot key, so it cannot contend for a `shadows-shipped-ui` seat.
299
+ - **No HTTP route collision.** It registers no `webServer` prefix.
300
+ - **No patch-layer collision.** The bundle patch only `insert`s its own row; it never overrides a built-in row's `config`.
301
+ - **No global mutation.** It does not patch prototypes, rewrite `process.env`, or replace the global fetch dispatcher.
302
+
303
+ **Shared event listeners are non-interfering by construction.** It observes the ordering-sensitive events `agent/created`, `agent/request`, `agent/request-error`, `tools/pre-execute` with `ctx.on()` — Cordis's broadcast registration, where every listener runs and none can starve another. **Every listener here delegates through `next()`**, so the chain is never short-circuited, and a mutation is applied to the value `next()` produced rather than returned in its place:
304
+ - `agent/request` — also used by `dsh-agent-teams` (1923★), which short-circuits by throwing without calling `next()`.
305
+ - `tools/pre-execute` — also used by `cc-safety-net` (1576★).
306
+
307
+ Static evidence: `dsh-plugin-doctor` K10–K13 report `pass` for every check on this repository.
308
+
309
+ ## Topics
310
+
311
+ `dsh`, `dsh-plugin`, `deepseek-harness`, `deepseek`, `cordis`, `router`,
312
+ `model-tier`, `cost`, `auto`.
313
+
314
+ ## Contributors
315
+
316
+ PerryLink. Issues and pull requests are welcome at
317
+ <https://github.com/PerryLink/dsh-autotier/issues>.
318
+
319
+ **Applicable DSH version:** verified against `dsh-v0.2.1-alpha.1` (the host release this build targets); requires `>=0.1.7-alpha.1 <0.2.0`.
320
+
321
+ ## PerryLink DSH Plugin Family
322
+
323
+ This project is one of the **44 DeepSeek Harness plugins** maintained by [PerryLink](https://github.com/PerryLink). If this one helps you, the others likely will too:
324
+
325
+ | Plugin | One-liner |
326
+ |---|---|
327
+ | **[dsh-auto-review](https://github.com/PerryLink/dsh-auto-review)** | Second-model auto-review on the approval chain, fail-closed by default | |
328
+ | **[dsh-autotier](https://github.com/PerryLink/dsh-autotier)** | Automatic strong/cheap model-tier routing with deterministic risk guards and a `/tier` command | |
329
+ | **[dsh-background-agents](https://github.com/PerryLink/dsh-background-agents)** | Durable background child agents with a Web UI sidebar, messaging and interrupt | 🚫 **RETIRED** — see the note above |
330
+ | **[dsh-budget](https://github.com/PerryLink/dsh-budget)** | Cost governance for DeepSeek Harness: budgets, carbon, and latency in one panel. | | 🧊 FROZEN — see the repo README |
331
+ | **[dsh-catalog](https://github.com/PerryLink/dsh-catalog)** | DSH Desktop Market standard catalog source for the PerryLink family | |
332
+ | **[dsh-cert-mcp](https://github.com/PerryLink/dsh-cert-mcp)** | Read-only MCP server exposing the certification registry: grades, snapshots and five-dimension evidence | |
333
+ | **[dsh-checkpoint-rewind](https://github.com/PerryLink/dsh-checkpoint-rewind)** | Claude Code /rewind-equivalent: snapshots, session forks, one-shot restore | |
334
+ | **[dsh-claude-move](https://github.com/PerryLink/dsh-claude-move)** | Migrate Claude Code sessions, memory, skills and CLAUDE.md into DSH | | 🧊 FROZEN — see the repo README |
335
+ | **[dsh-click](https://github.com/PerryLink/dsh-click)** | Cross-platform native desktop control for DeepSeek Harness — Windows first. | |
336
+ | **[dsh-composer-history](https://github.com/PerryLink/dsh-composer-history)** | Terminal-style input history for the web composer: arrows, Ctrl+R search | |
337
+ | **[dsh-data-quality](https://github.com/PerryLink/dsh-data-quality)** | Dataset quality checks and citation cross-checks (the optional numeric bridge consumed here) | |
338
+ | **[dsh-defend](https://github.com/PerryLink/dsh-defend)** | Prompt-injection, jailbreak, and secret-leak defense for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
339
+ | **[dsh-doublecheck](https://github.com/PerryLink/dsh-doublecheck)** | Engineering-discipline guard: requirements grill, test gates, adversary review | |
340
+ | **[dsh-draw](https://github.com/PerryLink/dsh-draw)** | Unified static-image generation routing for DeepSeek Harness. | | 🧊 FROZEN — see the repo README |
341
+ | **[dsh-fast](https://github.com/PerryLink/dsh-fast)** | Read-only performance diagnostics for DeepSeek Harness. | |
342
+ | **[dsh-fund-research](https://github.com/PerryLink/dsh-fund-research)** | Deterministic research reports for Chinese public mutual funds | |
343
+ | **[dsh-github](https://github.com/PerryLink/dsh-github)** | GitHub PR/issues integration for DSH, every write gated by approval | |
344
+ | **[dsh-industry-research](https://github.com/PerryLink/dsh-industry-research)** | Industry research orchestration that seals its deliverables through this plugin's `ctx.researchReport.assemble` | |
345
+ | **[dsh-laya](https://github.com/PerryLink/dsh-laya)** | Laya typed decisions (`noul`/`choice`/`score`) as a first-class Cordis service and model-visible tools | |
346
+ | **[dsh-library](https://github.com/PerryLink/dsh-library)** | Local document knowledge base for DeepSeek Harness. | |
347
+ | **[dsh-local-ai](https://github.com/PerryLink/dsh-local-ai)** | Local-model (Ollama) integration for DeepSeek Harness. | |
348
+ | **[dsh-lsp-actions](https://github.com/PerryLink/dsh-lsp-actions)** | LSP diagnostics, formatting, completion, code actions and rename over language servers | |
349
+ | **[dsh-mask](https://github.com/PerryLink/dsh-mask)** | PII masking middleware: anonymize at the model boundary, restore at the display layer | |
350
+ | **[dsh-mcp-panel](https://github.com/PerryLink/dsh-mcp-panel)** | Read-only MCP runtime panel: /mcp command + Settings tab with status, tools and errors | |
351
+ | **[dsh-memento](https://github.com/PerryLink/dsh-memento)** | Approval-gated cross-session memory: ctx.memory seam + SQLite + memory tool | | 🧊 FROZEN — see the repo README |
352
+ | **[dsh-observe](https://github.com/PerryLink/dsh-observe)** | OpenTelemetry and Langfuse observability exporter for DeepSeek Harness. | |
353
+ | **[dsh-output-styles](https://github.com/PerryLink/dsh-output-styles)** | Claude Code outputStyles-equivalent runtime style switching | |
354
+ | **[dsh-permission-rules](https://github.com/PerryLink/dsh-permission-rules)** | Claude Code-style declarative allow/deny/ask permission rules with audit | |
355
+ | **[dsh-plugin-certification](https://github.com/PerryLink/dsh-plugin-certification)** | Community certification registry with repro-checkable grades and badges | |
356
+ | **[dsh-plugin-doctor](https://github.com/PerryLink/dsh-plugin-doctor)** | Zero-dependency static + sandbox smoke detector for DSH plugins | |
357
+ | **[dsh-plugin-guide](https://github.com/PerryLink/dsh-plugin-guide)** | Plugin-development knowledge base as an on-demand agent skill | |
358
+ | **[dsh-plugin-kit](https://github.com/PerryLink/dsh-plugin-kit)** | Shared zero-runtime-dependency toolkit for the PerryLink DSH plugins | |
359
+ | **[dsh-plugin-upgrade](https://github.com/PerryLink/dsh-plugin-upgrade)** | One-package, one-corridor-index plugin upgrade skill: routes a repository to the matching closed corridor card | |
360
+ | **[dsh-reach](https://github.com/PerryLink/dsh-reach)** | Multi-channel approval/question bridge: WeChat/Telegram/Feishu, session console | | 🧊 FROZEN — see the repo README |
361
+ | **[dsh-research-report](https://github.com/PerryLink/dsh-research-report)** | Verifiable research-report engine: content-addressed evidence ledger and sealed versions | |
362
+ | **[dsh-score](https://github.com/PerryLink/dsh-score)** | Multi-dimensional quality scoring for DeepSeek Harness plugins. | |
363
+ | **[dsh-session-pin](https://github.com/PerryLink/dsh-session-pin)** | Pin sessions in the Web sidebar with durable ordering | 🚫 **RETIRED** — see the note above |
364
+ | **[dsh-session-sync](https://github.com/PerryLink/dsh-session-sync)** | Cross-device session sync for DeepSeek Harness — a dedicated git mirror of your session store. | |
365
+ | **[dsh-skill-pack-security](https://github.com/PerryLink/dsh-skill-pack-security)** | Security-audit skill pack: secret scan, dependency and supply-chain review | |
366
+ | **[dsh-talk](https://github.com/PerryLink/dsh-talk)** | Voice-first session loop for DeepSeek Harness: talk to it, hear it answer. | |
367
+ | **[dsh-team-rooms](https://github.com/PerryLink/dsh-team-rooms)** | Cross-session team rooms: shared message bus, task board and timeline | 🚫 **RETIRED** — see the note above |
368
+ | **[dsh-test-drive](https://github.com/PerryLink/dsh-test-drive)** | Isolated install-and-smoke test drives for DeepSeek Harness plugins. | |
369
+ | **[dsh-ticktick](https://github.com/PerryLink/dsh-ticktick)** | TickTick/Dida365 task bridge: session-header panel + 11 tools | |
370
+ | **[dsh-translate](https://github.com/PerryLink/dsh-translate)** | Vendor parameter translation and deterministic JSON repair for DeepSeek Harness. | |
371
+
372
+ ## License
373
+
374
+ Apache-2.0. See [LICENSE](./LICENSE) and
375
+ [THIRD_PARTY_NOTICES.md](./THIRD_PARTY_NOTICES.md).
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "dsh-autotier",
3
- "version": "0.2.13",
3
+ "version": "0.2.14",
4
4
  "description": "Automatic strong/cheap model-tier routing for DeepSeek Harness: intent-gated tier landing on the agent/request waterfall, plan-mode handoff (strong plans, cheap implements), deterministic high-risk guards on tools/pre-execute, failure escalation with TTL fallback, a /tier command, and tier status tools",
5
5
  "repository": {
6
6
  "type": "git",
@@ -125,27 +125,27 @@
125
125
  ],
126
126
  "engines": {
127
127
  "node": "^22.19.0 || >=24.0.0",
128
- "dsh": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0"
128
+ "dsh": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0"
129
129
  },
130
130
  "packageManager": "pnpm@11.7.0",
131
131
  "peerDependencies": {
132
132
  "@deepseek-ai/cordis": "^4.0.5-alpha.1",
133
133
  "@deepseek-ai/cosmokit": "^1.8.4",
134
- "@deepseek-ai/dsh-agent": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
135
- "@deepseek-ai/dsh-api-remotes": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
136
- "@deepseek-ai/dsh-client-connection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
137
- "@deepseek-ai/dsh-client-locale": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
138
- "@deepseek-ai/dsh-client-ui-conversation": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
139
- "@deepseek-ai/dsh-client-ui-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
140
- "@deepseek-ai/dsh-client-ui-slots": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
141
- "@deepseek-ai/dsh-commands": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
142
- "@deepseek-ai/dsh-llm": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
143
- "@deepseek-ai/dsh-plan-mode": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
144
- "@deepseek-ai/dsh-session": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
145
- "@deepseek-ai/dsh-session-projection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
146
- "@deepseek-ai/dsh-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
147
- "@deepseek-ai/dsh-tools": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
148
- "@deepseek-ai/dsh-typert-protocol": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
134
+ "@deepseek-ai/dsh-agent": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
135
+ "@deepseek-ai/dsh-api-remotes": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
136
+ "@deepseek-ai/dsh-client-connection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
137
+ "@deepseek-ai/dsh-client-locale": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
138
+ "@deepseek-ai/dsh-client-ui-conversation": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
139
+ "@deepseek-ai/dsh-client-ui-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
140
+ "@deepseek-ai/dsh-client-ui-slots": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
141
+ "@deepseek-ai/dsh-commands": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
142
+ "@deepseek-ai/dsh-llm": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
143
+ "@deepseek-ai/dsh-plan-mode": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
144
+ "@deepseek-ai/dsh-session": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
145
+ "@deepseek-ai/dsh-session-projection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
146
+ "@deepseek-ai/dsh-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
147
+ "@deepseek-ai/dsh-tools": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
148
+ "@deepseek-ai/dsh-typert-protocol": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
149
149
  "@deepseek-ai/schemastery": "^3.18.5-alpha.1"
150
150
  },
151
151
  "peerDependenciesMeta": {