dsh-autotier 0.2.11 → 0.2.13

package/CHANGELOG.md

@@ -5,9 +5,31 @@ All notable changes to this project are documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [0.2.13] - 2026-10-05
+
+### Changed
+
+- Raise the declared host floor to `0.1.6`, which is the line this package actually runs on. The peer band previously admitted `0.1.2-rc.1`, `0.1.5-alpha.1` and `0.1.5-rc.2`, but those lines are **incompatible at the host protocol level**, so the claim was false — and it was not merely theoretical: the Compat matrix failed on every pre-`0.1.6` leg while passing every leg from `0.1.6-alpha.2` on.
+  
+  Root cause, measured rather than inferred:
+  
+  - On `@deepseek-ai/dsh@0.1.2-rc.1` this package cannot activate: `typert-loader: ... invocation parameter codec is not backed by a zod v4 schema` → `plugin tree failed to load: 1 entry did not activate`. The same tarball loads on `0.1.6-alpha.2`.
+  - The host source confirms the protocol changed between those lines: the `is not backed by a zod v4 schema` validator exists at `dsh-v0.1.2-rc.1`, `dsh-v0.1.5-alpha.1` and `dsh-v0.1.5-rc.2`, and is gone from `dsh-v0.1.6-alpha.2` onward.
+  - Those lines are also **unreproducible from their own metadata**: `dsh@0.1.2-rc.1` declares `^0.1.2-rc.1` for its own sub-packages, so a fresh install drifts to newer sub-package code (measured: `dsh-app-boot` now demands a Cordis HMR service the old host does not provide).
+  
+  No plugin-side change can fix this. Narrowing the band corrects the declaration instead of continuing to advertise unsupported hosts. The Compat matrix drops the removed lines rather than testing hosts we do not claim.
+
+
+## [0.2.12] - 2026-10-05
+
+### Changed
+
+- Correct the release date in the previous section, which was stamped with the literal string `undefined` by the release stamper. No content or behaviour change; the version is bumped only because npm will not republish an existing version.
+
+
 ## [Unreleased]
 
-## [0.2.11] - undefined
+## [0.2.11] - 2026-10-05
 
 undefined
 

package/README-es.md

@@ -44,7 +44,7 @@ Este plugin forma parte de la [familia de plugins DSH](https://github.com/PerryL
 | `@deepseek-ai/dsh` `0.1.7-rc.2` | **requerida**; verificada contra el checkout correspondiente (`typecheck`) y los paquetes publicados (`typecheck:ci`, 214 pruebas) |
 | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | base de peers |
 
-Los rangos de peers nombran las cuatro líneas publicadas (`>=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), porque un rango cuyo único comparador de prerelease
+Los rangos de peers nombran las cuatro líneas publicadas (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), porque un rango cuyo único comparador de prerelease
 está en una tupla anterior no admite un alpha posterior. Se refrescan por ola.
 El rango declarado es deliberadamente más amplio que el verificado: documenta lo
 que acepta el manifiesto, no lo que se ha probado.

package/README-hi.md

@@ -42,7 +42,7 @@ DeepSeek Harness के लिए स्वचालित मॉडल-स्
 | `@deepseek-ai/dsh` `0.1.7-rc.2` | **आवश्यक**; मेल खाते checkout (`typecheck`) और प्रकाशित पैकेजों (`typecheck:ci`, 214 टेस्ट) दोनों पर सत्यापित |
 | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | peer आधार |
 
-peer ranges चारों प्रकाशित लाइनें स्पष्ट रूप से लिखती हैं (`>=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), क्योंकि जिस range का एकमात्र prerelease comparator
+peer ranges चारों प्रकाशित लाइनें स्पष्ट रूप से लिखती हैं (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), क्योंकि जिस range का एकमात्र prerelease comparator
 पुराने tuple पर हो वह बाद के alpha को स्वीकार नहीं करता। हर प्रकाशन-लहर पर
 रिफ़्रेश होता है। घोषित range जानबूझकर सत्यापित range से व्यापक है: यह दर्ज करती
 है कि manifest क्या स्वीकार करता है, यह नहीं कि क्या परखा गया।

package/README-pt.md

@@ -43,7 +43,7 @@ Este plugin faz parte da [família de plugins DSH](https://github.com/PerryLink)
 | `@deepseek-ai/dsh` `0.1.7-rc.2` | **obrigatória**; verificada contra o checkout correspondente (`typecheck`) e os pacotes publicados (`typecheck:ci`, 214 testes) |
 | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | base de peers |
 
-Os ranges de peers nomeiam as quatro linhas publicadas (`>=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), porque um range cujo único comparador de prerelease
+Os ranges de peers nomeiam as quatro linhas publicadas (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), porque um range cujo único comparador de prerelease
 está numa tupla anterior não admite um alpha posterior. São atualizados por onda.
 O range declarado é deliberadamente mais amplo que o verificado: documenta o que o
 manifesto aceita, não o que foi testado.

package/README-zh.md

@@ -39,7 +39,7 @@ DeepSeek Harness 的自动模型分档路由：一条用户指令进来，一个
 | `@deepseek-ai/dsh` `0.1.7-rc.2` | **必需**；已对同版 checkout（`typecheck`）与已发布包（`typecheck:ci`、214 项测试）双向验证 |
 | `@deepseek-ai/cordis` `^4.0.3`、`@deepseek-ai/cosmokit` `^1.8.4`、`@deepseek-ai/schemastery` `^3.18.3` | peer 基线 |
 
-peer 范围显式列出四条已发布线（`>=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`）——因为仅含较早版本元组预发布比较符的 semver 范围无法接纳更晚的 alpha；
+peer 范围显式列出四条已发布线（`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`）——因为仅含较早版本元组预发布比较符的 semver 范围无法接纳更晚的 alpha；
 每次发布波同步刷新。声明的范围刻意宽于已验证范围：它记录清单接受什么，而不是测过什么。
 
 **本次发布是破坏性适配。** `0.1.6` 代宿主移除了本插件赖以构建的 settings **provider** 缝：

package/README.md

@@ -44,7 +44,7 @@ escalate to the strong tier with a TTL fallback.
 | `@deepseek-ai/dsh` `0.1.7-rc.2` | **required**; verified against the matching checkout (`typecheck`) and the published packages (`typecheck:ci`, 214 tests) |
 | `@deepseek-ai/cordis` `^4.0.3`, `@deepseek-ai/cosmokit` `^1.8.4`, `@deepseek-ai/schemastery` `^3.18.3` | peer baseline |
 
-Peer ranges name all published lines explicitly (`>=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), because a semver range whose only prerelease
+Peer ranges name all published lines explicitly (`>=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0`), because a semver range whose only prerelease
 comparator sits on an earlier version tuple does not admit a later alpha.
 They are refreshed per published wave. The declared range is deliberately wider
 than the verified one: it documents what the manifest accepts, not what has been

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-autotier",
-  "version": "0.2.11",
+  "version": "0.2.13",
   "description": "Automatic strong/cheap model-tier routing for DeepSeek Harness: intent-gated tier landing on the agent/request waterfall, plan-mode handoff (strong plans, cheap implements), deterministic high-risk guards on tools/pre-execute, failure escalation with TTL fallback, a /tier command, and tier status tools",
   "repository": {
     "type": "git",
@@ -125,27 +125,27 @@
   ],
   "engines": {
     "node": "^22.19.0 || >=24.0.0",
-    "dsh": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0"
+    "dsh": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0"
   },
   "packageManager": "pnpm@11.7.0",
   "peerDependencies": {
     "@deepseek-ai/cordis": "^4.0.5-alpha.1",
     "@deepseek-ai/cosmokit": "^1.8.4",
-    "@deepseek-ai/dsh-agent": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-api-remotes": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-client-connection": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-client-locale": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-client-ui-conversation": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-client-ui-settings": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-client-ui-slots": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-commands": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-llm": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-plan-mode": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-session": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-session-projection": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-settings": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-tools": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
-    "@deepseek-ai/dsh-typert-protocol": ">=0.1.2-rc.1 <0.2.0 || >=0.1.5-alpha.1 <0.2.0 || >=0.1.6-0 <0.2.0 || >=0.1.7-0 <0.2.0 || >=0.2.0-0 <0.3.0 || >=0.2.1-0 <0.3.0",
+    "@deepseek-ai/dsh-agent": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-api-remotes": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-client-connection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-client-locale": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-client-ui-conversation": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-client-ui-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-client-ui-slots": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-commands": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-llm": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-plan-mode": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-session": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-session-projection": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-settings": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-tools": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
+    "@deepseek-ai/dsh-typert-protocol": ">=0.1.6-0 <0.2.0 || >=0.2.0-0 <0.3.0",
     "@deepseek-ai/schemastery": "^3.18.5-alpha.1"
   },
   "peerDependenciesMeta": {