dsh-any-deepseek 0.0.6 → 0.0.8

package/README.md

@@ -98,6 +98,35 @@ v1 is deliberately manual. A channel that fails reports its error; it does not s
 over to another one. Switching invalidates the prompt cache for the running conversation, so
 switch at a natural boundary (or start a new session).
 
+The current channel is marked on its row (left colour bar, stronger border, tinted background)
+rather than by a small badge — a single-choice list has to be readable at a glance.
+
+### Thinking level
+
+Each channel declares its selectable thinking levels, and the level picked in the harness is
+passed through to the relay:
+
+```
+harness reasoningEffort → pi-ai ThinkingLevel → model.thinkingLevelMap → wire value
+```
+
+There is no mapping layer in this plugin: the `thinkingLevelMap` the transport applies **is**
+the mapping, and a second one here would drift from it. A level declared `null` is unsupported
+and is not offered in the picker.
+
+### Display names
+
+`label` is a free-form display name, and it is what tells two accounts on the same relay apart.
+Rename a channel from the panel; the channel **id** never changes, because the id is the
+channel's identity (its key and its `current` target hang off it).
+
+### Image input
+
+Not supported yet, and declared as such. A harness `ImageBlock` carries only an
+`attachmentId`; turning that into request bytes requires the durable attachment service, which
+this adapter does not consult. Declaring image support anyway would make the harness stop
+substituting its placeholder text and drop the image silently — worse than declaring text-only.
+
 ## Usage accounting
 
 The ledger is append-only JSONL, split by month, under the harness home:

package/lib/adapter.d.ts

@@ -48,6 +48,22 @@ export interface AdapterDeps {
     resolveKey: (ref: string) => Promise<string | undefined>;
     /** Record one finished request. Must never throw. */
     record: (entry: LedgerEntry) => Promise<void>;
+    /**
+     * Read one image's request bytes from the durable attachment store.
+     *
+     * 🔴 Optional, and its absence is a real state (a composition without the attachment service).
+     * An `ImageBlock` in the harness carries only an `attachmentId` — never bytes — so without this
+     * seam an image cannot be sent at all. When it is missing, image content is replaced by a text
+     * placeholder rather than silently dropped: the model should know an image existed even when it
+     * cannot see it.
+     * @param attachmentId - durable id from the message block.
+     * @param mediaType - the block's declared media type.
+     * @returns base64 bytes and the media type to put on the wire.
+     */
+    readImage?: (attachmentId: string, mediaType: string) => Promise<{
+        data: string;
+        mediaType: string;
+    } | undefined>;
     /** Clock, injectable so tests are deterministic. */
     now: () => Date;
     /** Monotonic-ish millisecond clock for durations. */
@@ -59,6 +75,25 @@ interface CallOutcome {
     code?: string;
     usage: TokenUsage | null;
 }
+/**
+ * Derive the value for the OpenCode session header.
+ *
+ * 🔴 This is THIS PLUGIN's job, not the harness's. `/zen/go` is one relay's private requirement;
+ * the host cannot know about it and must not be expected to stamp anything for it. Whatever the
+ * harness happens to put on a request is only an input to a decision made here.
+ *
+ * The id is a stable hash of the harness session id, so:
+ *  · the same conversation keeps one affinity key (what the endpoint wants), and
+ *  · the value is opaque rather than echoing an internal id to a third party.
+ *
+ * Two hard requirements, both learned from a 400:
+ *  · **never absent** — the header is always sent, so a request can never go out without it;
+ *  · **stable when there is no session** — falling back to a random value would give every
+ *    request a different affinity key, which is worse than a constant.
+ * @param sessionId - the harness session id, when it supplied one.
+ * @returns a stable, non-empty session id.
+ */
+export declare function opencodeSessionId(sessionId: unknown): string;
 /**
  * Build the pi-ai model entry for one channel.
  *
@@ -68,15 +103,35 @@ interface CallOutcome {
  * @returns a pi-ai chat model describing that relay's view of the model.
  */
 export declare function buildPiModel(channel: ResolvedChannel): Model<Api>;
+/** One resolved image, keyed by attachment id. */
+export type ImageBytes = Map<string, {
+    data: string;
+    mediaType: string;
+}>;
+/**
+ * Collect the bytes for every image in a request.
+ *
+ * 🔴 A separate pass, because the conversion itself is synchronous and the store is not. This is
+ * also how the host's own pi-ai adapter does it, for the same reason.
+ *
+ * A block that cannot be read is left OUT of the map, and the converter then substitutes a text
+ * placeholder. That is deliberate: dropping the block would tell the model nothing, while a
+ * placeholder at least says an image was attached and names why it could not be shown. Skipping
+ * it silently is the failure mode this whole change exists to remove — the user sent an image and
+ * the model answered as though the message had been text only.
+ * @param options - the harness request.
+ * @param readImage - the attachment seam, when the composition has one.
+ * @returns resolved images keyed by attachment id.
+ */
+export declare function collectImages(options: GenerateOptions, readImage: AdapterDeps['readImage']): Promise<ImageBytes>;
 /**
  * Translate one harness request into a pi-ai context.
  *
- * The harness already projects images and files before an adapter sees them, so this is a
- * straightforward content mapping; anything the harness did not project is passed through.
  * @param options - the harness request.
+ * @param images - image bytes collected by {@link collectImages}; omitted for a text-only request.
  * @returns a pi-ai context plus the one-shot system prompt, when the caller set one.
  */
-export declare function toPiContext(options: GenerateOptions): PiContext;
+export declare function toPiContext(options: GenerateOptions, images?: ImageBytes): PiContext;
 /** Map pi-ai usage onto the harness's disjoint counters. */
 export declare function toTokenUsage(usage: AssistantMessage['usage']): TokenUsage;
 /**

package/lib/client.js

@@ -117,7 +117,7 @@ window.__ModuleLoader__.load({
 		}
 		//#endregion
 		//#region \0ad-css:src/client/SettingsPage
-		const css = "/* Panel styles.\n *\n * 🔴 There are NO `--dsw-alias-*` design tokens on this host (measured 2026-10-21: the document\n * declares 29 custom properties and not one is a colour). This file used to reference a dozen of\n * them, every one falling back to a hardcoded LIGHT value (`rgba(0,0,0,0.12)` and friends) — so\n * on the dark theme the borders and dividers were effectively invisible.\n *\n * ⇒ Derive everything from `currentColor`, which the host sets per theme. `color-mix` gives the\n * low-contrast borders and fills that a token would have provided, and it follows the theme\n * automatically instead of assuming one palette.\n */\n\n.ad-page {\n  display: flex;\n  flex-direction: column;\n  gap: 20px;\n  padding: 4px 2px 12px;\n}\n\n/* One place to change the two theme-derived values the whole panel uses. */\n.ad-page {\n  --ad-line: color-mix(in srgb, currentColor 18%, transparent);\n  --ad-line-strong: color-mix(in srgb, currentColor 32%, transparent);\n  --ad-fill-subtle: color-mix(in srgb, currentColor 7%, transparent);\n  --ad-danger: #e5534b;\n}\n\n.ad-head {\n  display: flex;\n  flex-direction: column;\n  gap: 6px;\n}\n\n.ad-title {\n  margin: 0;\n  font-size: 15px;\n  font-weight: 600;\n}\n\n.ad-intro {\n  margin: 0;\n  font-size: 12px;\n  line-height: 1.6;\n  opacity: 0.72;\n}\n\n.ad-error {\n  border: 1px solid var(--ad-danger);\n  border-radius: 6px;\n  padding: 8px 10px;\n  font-size: 12px;\n}\n\n.ad-section {\n  display: flex;\n  flex-direction: column;\n  gap: 10px;\n}\n\n.ad-sectionTitle {\n  margin: 0;\n  font-size: 12px;\n  font-weight: 600;\n  letter-spacing: 0.04em;\n  text-transform: uppercase;\n  opacity: 0.6;\n}\n\n.ad-rows {\n  list-style: none;\n  margin: 0;\n  padding: 0;\n  display: flex;\n  flex-direction: column;\n  gap: 6px;\n}\n\n.ad-row {\n  display: flex;\n  align-items: flex-start;\n  justify-content: space-between;\n  gap: 12px;\n  border: 1px solid var(--ad-line);\n  border-radius: 8px;\n  padding: 10px 12px;\n}\n\n.ad-row-current {\n  border-color: var(--ad-line-strong);\n}\n\n.ad-rowMain {\n  display: flex;\n  flex-direction: column;\n  gap: 4px;\n  min-width: 0;\n}\n\n.ad-rowTitleLine {\n  display: flex;\n  align-items: center;\n  gap: 6px;\n  font-size: 13px;\n  font-weight: 500;\n}\n\n.ad-rowTitle {\n  white-space: nowrap;\n}\n\n.ad-badge {\n  font-size: 10px;\n  padding: 1px 6px;\n  border-radius: 999px;\n  border: 1px solid currentColor;\n  opacity: 0.8;\n}\n\n.ad-warn {\n  color: #b7791f;\n  cursor: help;\n}\n\n.ad-rowMeta {\n  display: flex;\n  flex-wrap: wrap;\n  align-items: center;\n  gap: 6px;\n  font-size: 11px;\n  opacity: 0.66;\n  min-width: 0;\n}\n\n.ad-mono {\n  font-family: ui-monospace, SFMono-Regular, Menlo, monospace;\n  word-break: break-all;\n}\n\n.ad-sep {\n  opacity: 0.5;\n}\n\n.ad-rowActions {\n  display: flex;\n  align-items: center;\n  gap: 8px;\n  flex-shrink: 0;\n}\n\n.ad-btn {\n  font-size: 11px;\n  padding: 4px 10px;\n  border-radius: 6px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  cursor: pointer;\n}\n\n.ad-btn:disabled {\n  opacity: 0.45;\n  cursor: default;\n}\n\n.ad-btn-quiet {\n  opacity: 0.8;\n}\n\n.ad-probe {\n  font-size: 11px;\n  padding-top: 2px;\n}\n\n.ad-probe-ok {\n  color: #2f855a;\n}\n\n.ad-probe-bad {\n  color: #c53030;\n  word-break: break-word;\n}\n\n.ad-hint,\n.ad-empty,\n.ad-note {\n  margin: 0;\n  font-size: 11px;\n  line-height: 1.6;\n  opacity: 0.66;\n}\n\n.ad-dot {\n  width: 8px;\n  height: 8px;\n  border-radius: 50%;\n  flex-shrink: 0;\n  display: inline-block;\n}\n\n.ad-dot-on {\n  background: #2f855a;\n}\n\n.ad-dot-off {\n  border: 1px solid currentColor;\n  opacity: 0.5;\n}\n\n.ad-dot-unknown {\n  background: linear-gradient(90deg, currentColor 50%, transparent 50%);\n  opacity: 0.5;\n}\n\n/* The channel row is a radio \"pick\" zone: the whole left side is clickable, and the radio sits\n   at the start of the line so \"which one is live\" is readable down a single column. */\n.ad-rowPick {\n  display: flex;\n  align-items: flex-start;\n  gap: 10px;\n  flex: 1;\n  min-width: 0;\n  cursor: pointer;\n}\n\n.ad-rowPick input[type='radio'] {\n  flex: none;\n  /* Optically centred against the first text line rather than the row box. */\n  margin-top: 3px;\n  accent-color: var(--ad-line-strong);\n  cursor: pointer;\n}\n\n/* The switch is gone: selection is the only axis (see `channels.ts`). Keeping the rules would\n   invite someone to bring the second axis back. */\n\n.ad-tabs {\n  display: flex;\n  gap: 6px;\n}\n\n.ad-tab {\n  font-size: 11px;\n  padding: 3px 10px;\n  border-radius: 999px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  cursor: pointer;\n}\n\n.ad-tab-on {\n  border-color: var(--ad-line-strong);\n  font-weight: 600;\n}\n\n.ad-tab-refresh {\n  margin-left: auto;\n  opacity: 0.75;\n}\n\n.ad-table {\n  width: 100%;\n  border-collapse: collapse;\n  font-size: 11px;\n}\n\n.ad-table th,\n.ad-table td {\n  padding: 5px 8px;\n  border-bottom: 1px solid var(--ad-line);\n  text-align: left;\n}\n\n.ad-table th {\n  font-weight: 500;\n  opacity: 0.6;\n}\n\n.ad-num {\n  text-align: right;\n  font-family: ui-monospace, SFMono-Regular, Menlo, monospace;\n}\n\n.ad-total td {\n  font-weight: 600;\n  border-bottom: none;\n}\n\n/* ── add-channel form ─────────────────────────────────────────────────────── */\n\n.ad-addForm {\n  display: flex;\n  flex-direction: column;\n  gap: 8px;\n  border: 1px dashed var(--ad-line);\n  border-radius: 8px;\n  padding: 10px 12px;\n}\n\n.ad-field {\n  display: flex;\n  flex-direction: column;\n  gap: 3px;\n  font-size: 11px;\n}\n\n.ad-field > span {\n  opacity: 0.7;\n}\n\n.ad-input {\n  font-size: 11px;\n  padding: 4px 8px;\n  border-radius: 6px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  font-family: inherit;\n}\n\n/*\n * 🔴 A native `<select>` cannot be themed by leaving the background transparent.\n *\n * The popup list is drawn by the browser, not by the closed control's box: the options inherit\n * nothing from it, so `background: transparent` made them render in the platform default (light)\n * palette against this dark theme — reported by the owner and measured on the real host.\n *\n * 🔴 SECOND correction (measured 2026-10-21): this file used `var(--dsw-alias-color-*, #fallback)`\n * throughout, and **none of those variables exist**. The host declares only 29 custom properties\n * in total and not one is a colour token, so every `var()` here was falling back — and a fallback\n * that happens to be set inside a shorthand can be silently dropped (the select's background\n * computed to `rgba(0,0,0,0)`, i.e. still transparent, which is exactly the bug).\n *\n * ⇒ Use only values this file controls, derived from `currentColor` (the host sets a light text\n * colour on both themes) plus explicit translucent layers. No host token is assumed.\n */\nselect.ad-input {\n  /* Tells the engine which palette to use for the popup. This part DID work. */\n  color-scheme: dark light;\n  /*\n   * Paint the closed box with a layer that follows the surrounding text colour, so it matches\n   * whichever theme is active instead of hardcoding a dark value into a light theme.\n   */\n  background-color: color-mix(in srgb, currentColor 8%, transparent);\n  color: inherit;\n  cursor: pointer;\n  padding-right: 22px;\n  /* Room for the chevron drawn below, so text never runs under it. */\n  appearance: none;\n  background-image: linear-gradient(45deg, transparent 50%, currentColor 50%),\n    linear-gradient(135deg, currentColor 50%, transparent 50%);\n  background-position: calc(100% - 12px) calc(50% + 1px), calc(100% - 8px) calc(50% + 1px);\n  background-size: 4px 4px, 4px 4px;\n  background-repeat: no-repeat;\n}\n\nselect.ad-input:hover:not(:disabled) {\n  background-color: color-mix(in srgb, currentColor 14%, transparent);\n}\n\nselect.ad-input:focus-visible {\n  outline: 2px solid currentColor;\n  outline-offset: 1px;\n}\n\n/*\n * The popup itself follows `color-scheme`; these keep the option rows explicit for engines that\n * honour per-option colours. `color-scheme: dark` above is what actually stops the light-on-dark\n * list, because the popup is native chrome rather than a styled element.\n */\nselect.ad-input option {\n  background-color: Canvas;\n  color: CanvasText;\n}\n\n.ad-fieldError {\n  margin: 0;\n  font-size: 11px;\n  color: #c53030;\n}\n\n/* ── key row ──────────────────────────────────────────────────────────────── */\n\n/*\n * The key line states a FACT and offers the fix beside it: \"configured / not configured\",\n * the reference name the secret is filed under, and one text button that opens the input.\n *\n * The value is never shown — the harness credential seam answers \"configured?\" and refuses to\n * answer anything else, so there is nothing to render even if we wanted to.\n */\n.ad-keyLine {\n  display: flex;\n  flex-wrap: wrap;\n  align-items: center;\n  gap: 6px;\n  font-size: 11px;\n  padding-top: 2px;\n}\n\n.ad-keyOn {\n  color: #2f855a;\n}\n\n.ad-keyOff {\n  color: #b7791f;\n}\n\n/* The reference name, not a secret: monospace so it lines up and misreads as a name, not a value. */\n.ad-keyName {\n  font-size: 10px;\n  padding: 1px 5px;\n  border-radius: 4px;\n  background: var(--ad-fill-subtle);\n  opacity: 0.8;\n}\n\n/* A text-shaped action. Styled as a link because it opens an inline editor, not a dialog. */\n.ad-link {\n  font-size: 11px;\n  padding: 0;\n  border: none;\n  background: none;\n  color: inherit;\n  text-decoration: underline;\n  text-underline-offset: 2px;\n  opacity: 0.75;\n  cursor: pointer;\n}\n\n.ad-link:hover {\n  opacity: 1;\n}\n\n/* The inline key editor: one masked field and one button, on the same line as the fact above. */\n.ad-keyForm {\n  display: flex;\n  align-items: center;\n  gap: 6px;\n  padding-top: 4px;\n}\n\n.ad-keyForm .ad-input {\n  flex: 1;\n  min-width: 0;\n}\n\n/* A destructive action is quiet until hovered: it should be findable, not inviting. */\n.ad-btn-danger {\n  opacity: 0.6;\n}\n\n.ad-btn-danger:hover:not(:disabled) {\n  opacity: 1;\n  border-color: var(--ad-danger);\n  color: var(--ad-danger);\n}\n";
+		const css = "/* Panel styles.\n *\n * 🔴 There are NO `--dsw-alias-*` design tokens on this host (measured 2026-10-21: the document\n * declares 29 custom properties and not one is a colour). This file used to reference a dozen of\n * them, every one falling back to a hardcoded LIGHT value (`rgba(0,0,0,0.12)` and friends) — so\n * on the dark theme the borders and dividers were effectively invisible.\n *\n * ⇒ Derive everything from `currentColor`, which the host sets per theme. `color-mix` gives the\n * low-contrast borders and fills that a token would have provided, and it follows the theme\n * automatically instead of assuming one palette.\n */\n\n.ad-page {\n  display: flex;\n  flex-direction: column;\n  gap: 20px;\n  padding: 4px 2px 12px;\n}\n\n/* One place to change the two theme-derived values the whole panel uses. */\n.ad-page {\n  --ad-line: color-mix(in srgb, currentColor 18%, transparent);\n  --ad-line-strong: color-mix(in srgb, currentColor 32%, transparent);\n  --ad-fill-subtle: color-mix(in srgb, currentColor 7%, transparent);\n  /* The current row's fill: visible against both themes because it is derived from the text\n     colour the host already picked, not from an assumed palette. */\n  --ad-fill-current: color-mix(in srgb, currentColor 11%, transparent);\n  --ad-danger: #e5534b;\n}\n\n.ad-head {\n  display: flex;\n  flex-direction: column;\n  gap: 6px;\n}\n\n.ad-title {\n  margin: 0;\n  font-size: 15px;\n  font-weight: 600;\n}\n\n.ad-intro {\n  margin: 0;\n  font-size: 12px;\n  line-height: 1.6;\n  opacity: 0.72;\n}\n\n.ad-error {\n  border: 1px solid var(--ad-danger);\n  border-radius: 6px;\n  padding: 8px 10px;\n  font-size: 12px;\n}\n\n.ad-section {\n  display: flex;\n  flex-direction: column;\n  gap: 10px;\n}\n\n.ad-sectionTitle {\n  margin: 0;\n  font-size: 12px;\n  font-weight: 600;\n  letter-spacing: 0.04em;\n  text-transform: uppercase;\n  opacity: 0.6;\n}\n\n.ad-rows {\n  list-style: none;\n  margin: 0;\n  padding: 0;\n  display: flex;\n  flex-direction: column;\n  gap: 6px;\n}\n\n.ad-row {\n  display: flex;\n  align-items: flex-start;\n  justify-content: space-between;\n  gap: 12px;\n  border: 1px solid var(--ad-line);\n  border-radius: 8px;\n  padding: 10px 12px;\n  /*\n   * The left edge is reserved on EVERY row so the current one does not shift its content when\n   * selected — a row that reindents on click makes the list feel like it moved.\n   */\n  border-left: 3px solid transparent;\n}\n\n/*\n * 🔴 The current channel is marked three ways, not one.\n *\n * It used to be a small badge plus a barely-different border, and the owner could not tell at a\n * glance which relay was live — glanceability is the whole point of a single-choice list. So:\n * a colour bar down the left edge, a stronger border, and a tinted fill. All derived from\n * `currentColor`, because this host ships no colour tokens (measured: 29 custom properties, none\n * of them a colour), so any hardcoded value would assume the wrong theme.\n */\n.ad-row-current {\n  border-color: var(--ad-line-strong);\n  border-left-color: currentColor;\n  background: var(--ad-fill-current);\n}\n\n/* The 当前 badge keeps its place as the textual confirmation, for when colour is not enough. */\n.ad-row-current .ad-badge {\n  border-color: currentColor;\n  opacity: 1;\n  font-weight: 600;\n}\n\n/* A rename button must not look like the row's own selection affordance. */\n.ad-renameBtn {\n  margin-left: auto;\n  flex: none;\n}\n\n.ad-rowMain {\n  display: flex;\n  flex-direction: column;\n  gap: 4px;\n  min-width: 0;\n}\n\n.ad-rowTitleLine {\n  display: flex;\n  align-items: center;\n  gap: 6px;\n  font-size: 13px;\n  font-weight: 500;\n}\n\n.ad-rowTitle {\n  white-space: nowrap;\n}\n\n.ad-badge {\n  font-size: 10px;\n  padding: 1px 6px;\n  border-radius: 999px;\n  border: 1px solid currentColor;\n  opacity: 0.8;\n}\n\n.ad-warn {\n  color: #b7791f;\n  cursor: help;\n}\n\n.ad-rowMeta {\n  display: flex;\n  flex-wrap: wrap;\n  align-items: center;\n  gap: 6px;\n  font-size: 11px;\n  opacity: 0.66;\n  min-width: 0;\n}\n\n.ad-mono {\n  font-family: ui-monospace, SFMono-Regular, Menlo, monospace;\n  word-break: break-all;\n}\n\n.ad-sep {\n  opacity: 0.5;\n}\n\n.ad-rowActions {\n  display: flex;\n  align-items: center;\n  gap: 8px;\n  flex-shrink: 0;\n}\n\n.ad-btn {\n  font-size: 11px;\n  padding: 4px 10px;\n  border-radius: 6px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  cursor: pointer;\n}\n\n.ad-btn:disabled {\n  opacity: 0.45;\n  cursor: default;\n}\n\n.ad-btn-quiet {\n  opacity: 0.8;\n}\n\n.ad-probe {\n  font-size: 11px;\n  padding-top: 2px;\n}\n\n.ad-probe-ok {\n  color: #2f855a;\n}\n\n.ad-probe-bad {\n  color: #c53030;\n  word-break: break-word;\n}\n\n.ad-hint,\n.ad-empty,\n.ad-note {\n  margin: 0;\n  font-size: 11px;\n  line-height: 1.6;\n  opacity: 0.66;\n}\n\n.ad-dot {\n  width: 8px;\n  height: 8px;\n  border-radius: 50%;\n  flex-shrink: 0;\n  display: inline-block;\n}\n\n.ad-dot-on {\n  background: #2f855a;\n}\n\n.ad-dot-off {\n  border: 1px solid currentColor;\n  opacity: 0.5;\n}\n\n.ad-dot-unknown {\n  background: linear-gradient(90deg, currentColor 50%, transparent 50%);\n  opacity: 0.5;\n}\n\n/* The channel row is a radio \"pick\" zone: the whole left side is clickable, and the radio sits\n   at the start of the line so \"which one is live\" is readable down a single column. */\n.ad-rowPick {\n  display: flex;\n  align-items: flex-start;\n  gap: 10px;\n  flex: 1;\n  min-width: 0;\n  cursor: pointer;\n}\n\n.ad-rowPick input[type='radio'] {\n  flex: none;\n  /* Optically centred against the first text line rather than the row box. */\n  margin-top: 3px;\n  accent-color: var(--ad-line-strong);\n  cursor: pointer;\n}\n\n/* The switch is gone: selection is the only axis (see `channels.ts`). Keeping the rules would\n   invite someone to bring the second axis back. */\n\n.ad-tabs {\n  display: flex;\n  gap: 6px;\n}\n\n.ad-tab {\n  font-size: 11px;\n  padding: 3px 10px;\n  border-radius: 999px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  cursor: pointer;\n}\n\n.ad-tab-on {\n  border-color: var(--ad-line-strong);\n  font-weight: 600;\n}\n\n.ad-tab-refresh {\n  margin-left: auto;\n  opacity: 0.75;\n}\n\n.ad-table {\n  width: 100%;\n  border-collapse: collapse;\n  font-size: 11px;\n}\n\n.ad-table th,\n.ad-table td {\n  padding: 5px 8px;\n  border-bottom: 1px solid var(--ad-line);\n  text-align: left;\n}\n\n.ad-table th {\n  font-weight: 500;\n  opacity: 0.6;\n}\n\n.ad-num {\n  text-align: right;\n  font-family: ui-monospace, SFMono-Regular, Menlo, monospace;\n}\n\n.ad-total td {\n  font-weight: 600;\n  border-bottom: none;\n}\n\n/* ── add-channel form ─────────────────────────────────────────────────────── */\n\n.ad-addForm {\n  display: flex;\n  flex-direction: column;\n  gap: 8px;\n  border: 1px dashed var(--ad-line);\n  border-radius: 8px;\n  padding: 10px 12px;\n}\n\n.ad-field {\n  display: flex;\n  flex-direction: column;\n  gap: 3px;\n  font-size: 11px;\n}\n\n.ad-field > span {\n  opacity: 0.7;\n}\n\n.ad-input {\n  font-size: 11px;\n  padding: 4px 8px;\n  border-radius: 6px;\n  border: 1px solid var(--ad-line);\n  background: transparent;\n  color: inherit;\n  font-family: inherit;\n}\n\n/*\n * 🔴 A native `<select>` cannot be themed by leaving the background transparent.\n *\n * The popup list is drawn by the browser, not by the closed control's box: the options inherit\n * nothing from it, so `background: transparent` made them render in the platform default (light)\n * palette against this dark theme — reported by the owner and measured on the real host.\n *\n * 🔴 SECOND correction (measured 2026-10-21): this file used `var(--dsw-alias-color-*, #fallback)`\n * throughout, and **none of those variables exist**. The host declares only 29 custom properties\n * in total and not one is a colour token, so every `var()` here was falling back — and a fallback\n * that happens to be set inside a shorthand can be silently dropped (the select's background\n * computed to `rgba(0,0,0,0)`, i.e. still transparent, which is exactly the bug).\n *\n * ⇒ Use only values this file controls, derived from `currentColor` (the host sets a light text\n * colour on both themes) plus explicit translucent layers. No host token is assumed.\n */\nselect.ad-input {\n  /* Tells the engine which palette to use for the popup. This part DID work. */\n  color-scheme: dark light;\n  /*\n   * Paint the closed box with a layer that follows the surrounding text colour, so it matches\n   * whichever theme is active instead of hardcoding a dark value into a light theme.\n   */\n  background-color: color-mix(in srgb, currentColor 8%, transparent);\n  color: inherit;\n  cursor: pointer;\n  padding-right: 22px;\n  /* Room for the chevron drawn below, so text never runs under it. */\n  appearance: none;\n  background-image: linear-gradient(45deg, transparent 50%, currentColor 50%),\n    linear-gradient(135deg, currentColor 50%, transparent 50%);\n  background-position: calc(100% - 12px) calc(50% + 1px), calc(100% - 8px) calc(50% + 1px);\n  background-size: 4px 4px, 4px 4px;\n  background-repeat: no-repeat;\n}\n\nselect.ad-input:hover:not(:disabled) {\n  background-color: color-mix(in srgb, currentColor 14%, transparent);\n}\n\nselect.ad-input:focus-visible {\n  outline: 2px solid currentColor;\n  outline-offset: 1px;\n}\n\n/*\n * The popup itself follows `color-scheme`; these keep the option rows explicit for engines that\n * honour per-option colours. `color-scheme: dark` above is what actually stops the light-on-dark\n * list, because the popup is native chrome rather than a styled element.\n */\nselect.ad-input option {\n  background-color: Canvas;\n  color: CanvasText;\n}\n\n.ad-fieldError {\n  margin: 0;\n  font-size: 11px;\n  color: #c53030;\n}\n\n/* ── key row ──────────────────────────────────────────────────────────────── */\n\n/*\n * The key line states a FACT and offers the fix beside it: \"configured / not configured\",\n * the reference name the secret is filed under, and one text button that opens the input.\n *\n * The value is never shown — the harness credential seam answers \"configured?\" and refuses to\n * answer anything else, so there is nothing to render even if we wanted to.\n */\n.ad-keyLine {\n  display: flex;\n  flex-wrap: wrap;\n  align-items: center;\n  gap: 6px;\n  font-size: 11px;\n  padding-top: 2px;\n}\n\n.ad-keyOn {\n  color: #2f855a;\n}\n\n.ad-keyOff {\n  color: #b7791f;\n}\n\n/* The reference name, not a secret: monospace so it lines up and misreads as a name, not a value. */\n.ad-keyName {\n  font-size: 10px;\n  padding: 1px 5px;\n  border-radius: 4px;\n  background: var(--ad-fill-subtle);\n  opacity: 0.8;\n}\n\n/* A text-shaped action. Styled as a link because it opens an inline editor, not a dialog. */\n.ad-link {\n  font-size: 11px;\n  padding: 0;\n  border: none;\n  background: none;\n  color: inherit;\n  text-decoration: underline;\n  text-underline-offset: 2px;\n  opacity: 0.75;\n  cursor: pointer;\n}\n\n.ad-link:hover {\n  opacity: 1;\n}\n\n/* The inline key editor: one masked field and one button, on the same line as the fact above. */\n.ad-keyForm {\n  display: flex;\n  align-items: center;\n  gap: 6px;\n  padding-top: 4px;\n}\n\n.ad-keyForm .ad-input {\n  flex: 1;\n  min-width: 0;\n}\n\n/* A destructive action is quiet until hovered: it should be findable, not inviting. */\n.ad-btn-danger {\n  opacity: 0.6;\n}\n\n.ad-btn-danger:hover:not(:disabled) {\n  opacity: 1;\n  border-color: var(--ad-danger);\n  color: var(--ad-danger);\n}\n";
 		if (typeof document !== "undefined" && document.querySelector("style[data-ad-css=\"SettingsPage\"]") === null) {
 			const tag = document.createElement("style");
 			tag.setAttribute("data-ad-css", "SettingsPage");
@@ -182,12 +182,24 @@ window.__ModuleLoader__.load({
 			* second store to hold the value) was the design the owner rejected.
 			*/
 			const [newSecret, setNewSecret] = (0, react.useState)("");
+			/**
+			* The channel's display name, as typed.
+			*
+			* Empty means "use the preset's name". It is a real field (`label`) that the runtime has always
+			* honoured — the panel simply never exposed it, which made "two accounts on the same relay"
+			* impossible to tell apart.
+			*/
+			const [newLabel, setNewLabel] = (0, react.useState)("");
 			/** Which channel currently has its inline key field open (null = none). */
 			const [keying, setKeying] = (0, react.useState)(null);
 			const [keyDraft, setKeyDraft] = (0, react.useState)("");
 			const [keySaving, setKeySaving] = (0, react.useState)(false);
-			/** The channel id the form last derived from a preset (see the select's onChange). */
+			/** Which channel currently has its inline RENAME field open (null = none). */
+			const [renaming, setRenaming] = (0, react.useState)(null);
+			const [renameDraft, setRenameDraft] = (0, react.useState)("");
+			/** The channel id and the label the form last derived from a preset (see the select). */
 			const lastSuggestedId = (0, react.useRef)("");
+			const lastSuggestedLabel = (0, react.useRef)("");
 			const refresh = (0, react.useCallback)(async () => {
 				const [loaded, statsNow] = await Promise.all([loadChannels(), loadStats(group)]);
 				setRows(loaded.channels);
@@ -216,6 +228,15 @@ window.__ModuleLoader__.load({
 			* reasons they cannot (transport). Both are facts, and silently discarding them is what makes
 			* a panel look alive while nothing is saved.
 			*
+			* 🔴 **A successful write RE-READS, right here.** The rows the panel renders come from
+			* `/any-deepseek/channels`, which is computed from the configuration — not a live push. So a
+			* write that does not re-read leaves the panel showing the document as it was BEFORE the write,
+			* and the only way to see the result was to close and reopen the panel. Reported by the owner
+			* as "adding or removing a channel does not show up until I reopen".
+			*
+			* Doing it centrally matters: the previous code had `refresh()` at one call site and not at the
+			* others, so correctness depended on remembering. A new write path now inherits it.
+			*
 			* 🔴 **The refusal message must NOT name causes we have not checked.** This used to read
 			* "只读部署，或设置服务未启用" — and the one time it actually fired, the real cause was
 			* neither: `current` was missing `.volatile()` in the schema, three layers away. Naming two
@@ -226,8 +247,14 @@ window.__ModuleLoader__.load({
 			*/
 			const write = (run, context = "保存失败") => {
 				run().then((accepted) => {
-					if (!accepted) setError(`${context}：宿主拒绝了这个修改`);
-					else setError(null);
+					if (!accepted) {
+						setError(`${context}：宿主拒绝了这个修改`);
+						return;
+					}
+					setError(null);
+					refresh().catch((cause) => {
+						setError(`已写入，但重新读取失败：${cause instanceof Error ? cause.message : String(cause)}`);
+					});
 				}, (cause) => {
 					setError(`${context}：${cause instanceof Error ? cause.message : String(cause)}`);
 				});
@@ -259,21 +286,35 @@ window.__ModuleLoader__.load({
 			* there is no second store to keep in step, so there is no ordering to get wrong and no way for
 			* "channel exists but its key does not" to be a reachable state. Pre-filling endpoint fields is
 			* still avoided: a preset-backed channel records the preset, so later preset fixes reach it.
+			*
+			* `label` is only written when the user changed it. Leaving it out lets the preset's display
+			* name apply and keep tracking preset changes; writing the same string back would freeze
+			* today's name into the document.
 			*/
 			const addChannel = () => {
 				const id = newId.trim();
 				if (newPreset === "" || id === "" || newIdProblem !== null || newSecret.trim() === "") return;
-				write(() => setField(["channels", id], {
+				const label = newLabel.trim();
+				const entry = {
 					preset: newPreset,
 					apiKey: newSecret.trim()
-				}), "添加渠道失败");
+				};
+				if (label !== "") entry.label = label;
+				write(() => setField(["channels", id], entry), "添加渠道失败");
 				if (current === "") write(() => setField(["current"], id), "设为当前渠道失败");
 				setNewSecret("");
 				setNewId("");
+				setNewLabel("");
 				setNewPreset("");
 				lastSuggestedId.current = "";
+				lastSuggestedLabel.current = "";
 				setAdding(false);
 			};
+			/**
+			* Remove one channel.
+			*
+			* The row disappears because `write()` re-reads on success; there is nothing to remember here.
+			*/
 			const removeChannel = (id) => {
 				write(() => removeField(["channels", id]), "移除渠道失败");
 				if (current === id) write(() => removeField(["current"]), "清除当前选择失败");
@@ -312,6 +353,32 @@ window.__ModuleLoader__.load({
 					setKeySaving(false);
 				}
 			};
+			/**
+			* Rename one channel.
+			*
+			* `label` is the display name and nothing else: the channel's identity is its id (the
+			* configuration key), which renaming must never touch — a renamed key would be a different
+			* channel, with a different key and a different `current` target.
+			*
+			* Clearing the name removes the field, which restores the preset's name rather than leaving an
+			* empty label in the document.
+			* @param row - the channel being renamed.
+			*/
+			const renameChannel = (row) => {
+				const next = renameDraft.trim();
+				if (next === "") write(() => removeField([
+					"channels",
+					row.id,
+					"label"
+				]), "恢复默认名失败");
+				else write(() => setField([
+					"channels",
+					row.id,
+					"label"
+				], next), "重命名失败");
+				setRenaming(null);
+				setRenameDraft("");
+			};
 			return /* @__PURE__ */ (0, react_jsx_runtime.jsxs)("div", {
 				className: "ad-page",
 				children: [
@@ -359,6 +426,8 @@ window.__ModuleLoader__.load({
 									const probeResult = verdict[row.id];
 									return /* @__PURE__ */ (0, react_jsx_runtime.jsxs)("li", {
 										className: `ad-row${isCurrent ? " ad-row-current" : ""}`,
+										"aria-current": isCurrent ? "true" : void 0,
+										"data-current": isCurrent ? "true" : "false",
 										children: [/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("label", {
 											className: "ad-rowPick",
 											children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("input", {
@@ -388,9 +457,45 @@ window.__ModuleLoader__.load({
 																className: "ad-warn",
 																title: row.warnings.join("\n"),
 																children: "⚠"
+															}),
+															/* @__PURE__ */ (0, react_jsx_runtime.jsx)("button", {
+																type: "button",
+																className: "ad-link ad-renameBtn",
+																title: "改显示名（渠道 id 不变）",
+																onClick: (event) => {
+																	event.preventDefault();
+																	event.stopPropagation();
+																	setRenaming(renaming === row.id ? null : row.id);
+																	setRenameDraft(renaming === row.id ? "" : row.label);
+																},
+																children: renaming === row.id ? "取消" : "改名"
 															})
 														]
 													}),
+													renaming === row.id && /* @__PURE__ */ (0, react_jsx_runtime.jsxs)("span", {
+														className: "ad-keyForm",
+														children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("input", {
+															className: "ad-input",
+															value: renameDraft,
+															placeholder: "显示名（留空则用预设默认名）",
+															onClick: (event) => event.preventDefault(),
+															onChange: (event) => setRenameDraft(event.target.value),
+															onKeyDown: (event) => {
+																if (event.key === "Enter") {
+																	event.preventDefault();
+																	renameChannel(row);
+																}
+															}
+														}), /* @__PURE__ */ (0, react_jsx_runtime.jsx)("button", {
+															type: "button",
+															className: "ad-btn",
+															onClick: (event) => {
+																event.preventDefault();
+																renameChannel(row);
+															},
+															children: "保存名字"
+														})]
+													}),
 													/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("span", {
 														className: "ad-rowMeta",
 														children: [
@@ -501,9 +606,13 @@ window.__ModuleLoader__.load({
 												const next = event.target.value;
 												setNewPreset(next);
 												const previousId = lastSuggestedId.current;
+												const previousLabel = lastSuggestedLabel.current;
 												const nextId = suggestId(next, rows);
+												const nextLabel = presets.find((preset) => preset.id === next)?.displayName ?? "";
 												setNewId((current) => current === "" || current === previousId ? nextId : current);
+												setNewLabel((current) => current === "" || current === previousLabel ? nextLabel : current);
 												lastSuggestedId.current = nextId;
+												lastSuggestedLabel.current = nextLabel;
 											},
 											children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("option", {
 												value: "",
@@ -527,6 +636,15 @@ window.__ModuleLoader__.load({
 										className: "ad-fieldError",
 										children: newIdProblem
 									}),
+									/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("label", {
+										className: "ad-field",
+										children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("span", { children: "显示名" }), /* @__PURE__ */ (0, react_jsx_runtime.jsx)("input", {
+											className: "ad-input",
+											value: newLabel,
+											placeholder: newPreset === "" ? "先选上面的规格" : "例如「Open Design（主号）」",
+											onChange: (event) => setNewLabel(event.target.value)
+										})]
+									}),
 									/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("label", {
 										className: "ad-field",
 										children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("span", { children: "密钥" }), /* @__PURE__ */ (0, react_jsx_runtime.jsx)("input", {
@@ -573,6 +691,7 @@ window.__ModuleLoader__.load({
 								onClick: () => {
 									setAdding(true);
 									lastSuggestedId.current = "";
+									lastSuggestedLabel.current = "";
 								},
 								children: "添加渠道"
 							}),

package/lib/index.js

@@ -2,6 +2,7 @@ import { join } from "node:path";
 import z from "@deepseek-ai/schemastery";
 import { LlmAdapter, ReasoningEffortId, ToolCallId } from "@deepseek-ai/dsh-llm";
 import "@deepseek-ai/dsh-credentials";
+import { createHash } from "node:crypto";
 import { createModels, createProvider } from "@earendil-works/pi-ai";
 import { openAICompletionsApi } from "@earendil-works/pi-ai/api/openai-completions.lazy";
 import { appendFile, mkdir, readFile, readdir } from "node:fs/promises";
@@ -161,13 +162,31 @@ const DEFAULT_MAX_TOKENS = 32768;
 *
 * Kept as one constant because these are properties of the *model*, not of a relay; a relay
 * that disagrees corrects them in its own preset.
+*
+* ## Why `input` lists image
+*
+* The model is multimodal, and the harness only projects an image into a request when the model
+* entry declares the capability. Declaring text-only therefore did not mean "we never send
+* images" — it meant the user's image never reached the model at all, silently. The relay side is
+* now real: `adapter.ts` collects image bytes through the durable attachment store and maps them
+* to pi-ai `image` content, and falls back to a visible text placeholder when it cannot.
 */
 const V41_FLASH_CAPS = {
 	contextWindow: 1e6,
 	maxTokens: 384e3,
-	input: ["text"],
+	input: ["text", "image"],
+	/**
+	* Selectable thinking levels, in pi-ai's vocabulary.
+	*
+	* The VALUES are the wire spellings this model family accepts (`reasoning_effort`); `null`
+	* would mark a level as unsupported. pi-ai consumes this map directly as `thinkingLevelMap`,
+	* which is why this plugin does not implement a translation layer of its own — a second
+	* mapping would inevitably drift from the one the transport actually applies.
+	*/
 	reasoningEfforts: {
+		off: null,
 		low: "low",
+		medium: "medium",
 		high: "high",
 		max: "max"
 	}
@@ -184,19 +203,42 @@ const DEEPSEEK_THINKING_COMPAT = {
 	thinkingFormat: "deepseek"
 };
 /**
-* Header family the OpenCode Go endpoint requires.
+* Static headers the OpenCode Go endpoint wants on every request.
 *
-* `/zen/go` answers 400 `Request is missing x-opencode-session` without it. The values are
-* static on purpose: the header is resolved once per route, so a per-request value would
-* either change nothing or silently change the cache key.
+* The session id is NOT here on purpose — it is injected per request, because the endpoint wants
+* it stable *per conversation* rather than per install. What lives here is the client identity,
+* which does not vary. See {@link OPENCODE_SESSION_FALLBACK} for what happens when the harness
+* gives us no session at all.
 */
 const OPENCODE_HEADERS = {
-	"x-opencode-session": "dsh-any-deepseek",
-	"X-Session-ID": "dsh-any-deepseek",
 	"x-opencode-client": "dsh",
 	"x-opencode-project": "global"
 };
 /**
+* The user agent a request to OpenCode Go identifies itself with.
+*
+* The upstream asks clients to identify themselves rather than send a generic SDK name.
+*/
+const CLIENT_USER_AGENT = "dsh-any-deepseek/1.0";
+/** Header carrying the per-conversation routing id on OpenCode Go. */
+const OPENCODE_SESSION_HEADER = "x-opencode-session";
+/**
+* Session id used when the harness gives us none.
+*
+* 🔴 **This fallback is load-bearing, not decoration**, and dropping it is a measured failure.
+*
+* The endpoint wants a per-conversation id, so the honest implementation is "use the harness's
+* `sessionId`". The problem is that the harness does not stamp one on every request — and when it
+* does not, an implementation that ONLY reads `options.sessionId` sends **no session header at
+* all**, which the endpoint rejects with 400 `MissingSessionID`: precisely the failure the header
+* exists to prevent. So the value is "harness session when present, this constant otherwise".
+*
+* A constant is a worse affinity key than a real per-session id and a far better one than none:
+* it still gives the upstream one consistent key per install. That is the same trade the sibling
+* `dsh-serenity-hooks` plugin made for the same endpoint, proved on a real host.
+*/
+const OPENCODE_SESSION_FALLBACK = "dsh-any-deepseek";
+/**
 * Presets keyed by a stable id.
 *
 * The id is what a channel entry stores (`preset: opencode-go`), so it is part of the user's
@@ -460,12 +502,42 @@ function resolveChannel(id, raw) {
 			input,
 			...(entry.reasoningEfforts ?? preset?.reasoningEfforts) === void 0 ? {} : { reasoningEfforts: entry.reasoningEfforts ?? preset?.reasoningEfforts },
 			...(entry.compat ?? preset?.compat) === void 0 ? {} : { compat: entry.compat ?? preset?.compat },
-			...(entry.headers ?? preset?.headers) === void 0 ? {} : { headers: entry.headers ?? preset?.headers },
+			/**
+			* 🔴 Headers MERGE per key; they do not replace.
+			*
+			* `entry.headers ?? preset?.headers` treated the two as alternatives, so a user who added
+			* one header of their own silently lost the preset's — and for OpenCode Go those are the
+			* headers the endpoint refuses requests without. Merging keeps the preset's required set
+			* and lets the entry win only on the keys it actually names.
+			*/
+			...mergeHeaders(preset?.headers, entry.headers) === void 0 ? {} : { headers: mergeHeaders(preset?.headers, entry.headers) },
 			warnings
 		}
 	};
 }
 /**
+* Merge preset headers with entry headers, the entry winning per key.
+*
+* HTTP field names are case-insensitive, so a user writing `X-Session-ID` must override a
+* preset's `x-session-id` rather than appearing alongside it as a second header — sending both
+* would leave the upstream to pick one, which is exactly the ambiguity the header exists to
+* resolve.
+* @param preset - headers the preset declares.
+* @param entry - headers the entry declares.
+* @returns the merged set, or undefined when neither side declares any.
+*/
+function mergeHeaders(preset, entry) {
+	if (entry === void 0) return preset === void 0 ? void 0 : { ...preset };
+	if (preset === void 0) return { ...entry };
+	const merged = {};
+	for (const [name, value] of Object.entries(preset)) merged[name] = value;
+	for (const [name, value] of Object.entries(entry)) {
+		for (const existing of Object.keys(merged)) if (existing !== name && existing.toLowerCase() === name.toLowerCase()) delete merged[existing];
+		merged[name] = value;
+	}
+	return merged;
+}
+/**
 * Resolve every channel in one configuration document.
 *
 * Problems are collected, never thrown: one broken channel must not make the rest of the
@@ -582,6 +654,29 @@ const PROVIDER_ID = "any-deepseek";
 /** Display name for the route in provider selectors. */
 const PROVIDER_NAME = "Any DeepSeek";
 /**
+* Derive the value for the OpenCode session header.
+*
+* 🔴 This is THIS PLUGIN's job, not the harness's. `/zen/go` is one relay's private requirement;
+* the host cannot know about it and must not be expected to stamp anything for it. Whatever the
+* harness happens to put on a request is only an input to a decision made here.
+*
+* The id is a stable hash of the harness session id, so:
+*  · the same conversation keeps one affinity key (what the endpoint wants), and
+*  · the value is opaque rather than echoing an internal id to a third party.
+*
+* Two hard requirements, both learned from a 400:
+*  · **never absent** — the header is always sent, so a request can never go out without it;
+*  · **stable when there is no session** — falling back to a random value would give every
+*    request a different affinity key, which is worse than a constant.
+* @param sessionId - the harness session id, when it supplied one.
+* @returns a stable, non-empty session id.
+*/
+function opencodeSessionId(sessionId) {
+	const raw = sessionId === void 0 || sessionId === null ? "" : String(sessionId).trim();
+	if (raw === "") return OPENCODE_SESSION_FALLBACK;
+	return createHash("sha256").update(raw).digest("hex").slice(0, 32);
+}
+/**
 * Build the pi-ai model entry for one channel.
 *
 * The advertised id (`deepseek-v4.1-flash`) never reaches the wire here: each channel's own
@@ -590,6 +685,8 @@ const PROVIDER_NAME = "Any DeepSeek";
 * @returns a pi-ai chat model describing that relay's view of the model.
 */
 function buildPiModel(channel) {
+	const thinkingLevelMap = channel.reasoningEfforts === void 0 ? void 0 : Object.fromEntries(Object.entries(channel.reasoningEfforts).filter(([, value]) => value !== null));
+	const hasThinking = thinkingLevelMap !== void 0 && Object.keys(thinkingLevelMap).length > 0;
 	return {
 		id: channel.model,
 		name: channel.label,
@@ -605,20 +702,64 @@ function buildPiModel(channel) {
 		},
 		contextWindow: channel.contextWindow,
 		maxTokens: channel.maxTokens,
-		reasoning: channel.reasoningEfforts !== void 0 && Object.keys(channel.reasoningEfforts).length > 0,
+		reasoning: hasThinking,
+		...hasThinking ? { thinkingLevelMap } : {},
 		...channel.compat === void 0 ? {} : { compat: channel.compat },
 		...channel.headers === void 0 ? {} : { headers: { ...channel.headers } }
 	};
 }
 /**
+* Collect the bytes for every image in a request.
+*
+* 🔴 A separate pass, because the conversion itself is synchronous and the store is not. This is
+* also how the host's own pi-ai adapter does it, for the same reason.
+*
+* A block that cannot be read is left OUT of the map, and the converter then substitutes a text
+* placeholder. That is deliberate: dropping the block would tell the model nothing, while a
+* placeholder at least says an image was attached and names why it could not be shown. Skipping
+* it silently is the failure mode this whole change exists to remove — the user sent an image and
+* the model answered as though the message had been text only.
+* @param options - the harness request.
+* @param readImage - the attachment seam, when the composition has one.
+* @returns resolved images keyed by attachment id.
+*/
+async function collectImages(options, readImage) {
+	const images = /* @__PURE__ */ new Map();
+	if (readImage === void 0) return images;
+	const pending = [];
+	for (const message of options.messages) {
+		if (!Array.isArray(message.content)) continue;
+		for (const block of message.content) {
+			const candidate = block;
+			if (candidate.type !== "image") continue;
+			const id = candidate.attachment?.attachmentId;
+			const mediaType = candidate.attachment?.mediaType;
+			if (typeof id !== "string" || typeof mediaType !== "string") continue;
+			if (images.has(id)) continue;
+			pending.push({
+				id,
+				mediaType
+			});
+		}
+	}
+	const resolved = await Promise.all(pending.map(async (item) => {
+		try {
+			return [item.id, await readImage(item.id, item.mediaType)];
+		} catch {
+			return [item.id, void 0];
+		}
+	}));
+	for (const [id, value] of resolved) if (value !== void 0) images.set(id, value);
+	return images;
+}
+/**
 * Translate one harness request into a pi-ai context.
 *
-* The harness already projects images and files before an adapter sees them, so this is a
-* straightforward content mapping; anything the harness did not project is passed through.
 * @param options - the harness request.
+* @param images - image bytes collected by {@link collectImages}; omitted for a text-only request.
 * @returns a pi-ai context plus the one-shot system prompt, when the caller set one.
 */
-function toPiContext(options) {
+function toPiContext(options, images) {
 	const messages = options.messages.map((message) => {
 		if (message.role === "assistant") return {
 			role: "assistant",
@@ -655,7 +796,7 @@ function toPiContext(options) {
 		};
 		return {
 			role: "user",
-			content: textAndImages(message.content),
+			content: userContent(message.content, images),
 			timestamp: 0
 		};
 	});
@@ -695,14 +836,45 @@ function safeJson(raw) {
 		return {};
 	}
 }
-/** Map harness content blocks to pi-ai text/image blocks. */
-function textAndImages(content) {
+/**
+* Map one user message's blocks to pi-ai content.
+*
+* 🔴 An image block carries an `attachmentId`, never bytes — so it can only become an image when
+* {@link collectImages} resolved it. When it did not, the block becomes a TEXT PLACEHOLDER rather
+* than disappearing: the model should be told an image was attached and that it could not be
+* read. The previous version dropped such blocks entirely, which is how a user's screenshot
+* reached the plugin and the model answered as though the message had been text only.
+* @param content - harness content blocks.
+* @param images - resolved image bytes, when any were collected.
+* @returns pi-ai content blocks.
+*/
+function userContent(content, images) {
 	const out = [];
 	for (const block of content) {
 		const typed = block;
-		if (typed.type === "text" && typeof typed.text === "string") out.push({
+		if (typed.type === "text" && typeof typed.text === "string") {
+			out.push({
+				type: "text",
+				text: typed.text
+			});
+			continue;
+		}
+		if (typed.type !== "image") continue;
+		const id = typed.attachment?.attachmentId;
+		const resolved = typeof id === "string" ? images?.get(id) : void 0;
+		if (resolved !== void 0) {
+			out.push({
+				type: "image",
+				data: resolved.data,
+				mimeType: resolved.mediaType
+			});
+			continue;
+		}
+		if (typed.offloaded === true || typed.attachment?.offloaded === true) continue;
+		const name = typed.attachment?.name === void 0 ? "" : ` (${typed.attachment.name})`;
+		out.push({
 			type: "text",
-			text: typed.text
+			text: `[an image was attached${name}, but this route could not read its bytes]`
 		});
 	}
 	return out;
@@ -987,7 +1159,7 @@ var AnyDeepSeekAdapter = class extends LlmAdapter {
 	}
 	async resolveModel(provider, model, _signal) {
 		const channel = this.selected();
-		const efforts = Object.keys(channel?.reasoningEfforts ?? {});
+		const efforts = Object.entries(channel?.reasoningEfforts ?? {}).filter(([, wire]) => wire !== null).map(([id]) => id);
 		const reasoning = efforts.length === 0 ? {} : { reasoning: { efforts: efforts.map((id) => ({
 			id: ReasoningEffortId(id),
 			name: id
@@ -1084,14 +1256,38 @@ var AnyDeepSeekAdapter = class extends LlmAdapter {
 			models: [model],
 			api: openAICompletionsApi()
 		}));
+		/**
+		* Per-request headers.
+		*
+		* Two things OpenCode Go requires cannot live in a preset, because neither is a constant:
+		*
+		*  · `x-opencode-session` must be STABLE PER CONVERSATION, and it must ALWAYS be present.
+		*    Both halves matter, and getting only the first produced a 400: an earlier version read
+		*    `options.sessionId` and sent nothing when it was absent — and the harness does not stamp
+		*    one on every request. So the value is a stable hash of the harness session id when we
+		*    have one, and a constant when we do not. A hash keeps the id opaque while staying stable
+		*    for the same conversation, which is all the endpoint's affinity key needs.
+		*  · `User-Agent` must identify THIS client rather than the generic SDK. pi-ai sets its own,
+		*    so the preset's static headers alone can never satisfy that rule.
+		*/
+		const requestHeaders = {};
+		if (channel.headers !== void 0 && Object.hasOwn(channel.headers, "x-opencode-client")) {
+			const session = opencodeSessionId(options.sessionId);
+			requestHeaders[OPENCODE_SESSION_HEADER] = session;
+			requestHeaders["X-Session-ID"] = session;
+			requestHeaders["User-Agent"] = CLIENT_USER_AGENT;
+		}
 		const streamOptions = {
 			apiKey: key,
 			signal: options.signal,
 			...options.temperature === void 0 ? {} : { temperature: options.temperature },
-			...options.maxTokens === void 0 ? {} : { maxTokens: options.maxTokens }
+			...options.maxTokens === void 0 ? {} : { maxTokens: options.maxTokens },
+			...options.reasoningEffort === void 0 ? {} : { reasoning: options.reasoningEffort },
+			...Object.keys(requestHeaders).length === 0 ? {} : { headers: requestHeaders }
 		};
 		try {
-			const events = models.streamSimple(model, toPiContext(options), streamOptions);
+			const images = await collectImages(options, this.deps.readImage);
+			const events = models.streamSimple(model, toPiContext(options, images), streamOptions);
 			for await (const chunk of toStreamChunks(events, (observed) => {
 				outcome = observed;
 			})) yield chunk;
@@ -1698,10 +1894,45 @@ function apply(ctx, config) {
 		const value = unwrap((ctx.fiber?.config ?? config).current);
 		return typeof value === "string" ? value : void 0;
 	};
+	/**
+	* Read one image's request bytes from the harness attachment store.
+	*
+	* 🔴 This is the host seam, not something this plugin invents: a harness `ImageBlock` carries
+	* only an `attachmentId`, and `readImageRequest` is the documented way to turn that into bytes.
+	* Without this path the model cannot receive an image no matter what `input` declares — which
+	* was exactly this plugin's state until now, and why a screenshot the user sent never arrived.
+	*
+	* The target bounds are the store's own normalization request, not a guess about the relay:
+	* 2048px keeps the harness's normal form, and the byte ceiling is the one the host's pi-ai
+	* adapter uses for the same purpose.
+	*/
+	const readImage = async (attachmentId, mediaType) => {
+		const attachments = service(ctx, "attachments");
+		if (attachments?.readImageRequest === void 0) return void 0;
+		try {
+			const stored = await attachments.readImageRequest({
+				attachmentId,
+				mediaType
+			}, {
+				width: 2048,
+				height: 2048,
+				maxBytes: 4194304
+			});
+			if (stored?.data === void 0) return void 0;
+			return {
+				data: Buffer.from(stored.data).toString("base64"),
+				mediaType: stored.mediaType ?? mediaType
+			};
+		} catch (error) {
+			console.warn(`[any-deepseek] 读不到图片 ${attachmentId}: ${error instanceof Error ? error.message : String(error)}`);
+			return;
+		}
+	};
 	const adapter = new AnyDeepSeekAdapter({
 		channels,
 		current,
 		resolveKey,
+		readImage,
 		record: makeRecorder(ctx, config),
 		now: () => /* @__PURE__ */ new Date(),
 		elapsed: () => Number(process.hrtime.bigint() / 1000000n)

package/lib/presets.d.ts

@@ -81,6 +81,30 @@ export declare const ADVERTISED_MODEL_NAME = "DeepSeek V4.1 Flash";
  */
 export declare const DEFAULT_CONTEXT_WINDOW = 262144;
 export declare const DEFAULT_MAX_TOKENS = 32768;
+/**
+ * The user agent a request to OpenCode Go identifies itself with.
+ *
+ * The upstream asks clients to identify themselves rather than send a generic SDK name.
+ */
+export declare const CLIENT_USER_AGENT = "dsh-any-deepseek/1.0";
+/** Header carrying the per-conversation routing id on OpenCode Go. */
+export declare const OPENCODE_SESSION_HEADER = "x-opencode-session";
+/**
+ * Session id used when the harness gives us none.
+ *
+ * 🔴 **This fallback is load-bearing, not decoration**, and dropping it is a measured failure.
+ *
+ * The endpoint wants a per-conversation id, so the honest implementation is "use the harness's
+ * `sessionId`". The problem is that the harness does not stamp one on every request — and when it
+ * does not, an implementation that ONLY reads `options.sessionId` sends **no session header at
+ * all**, which the endpoint rejects with 400 `MissingSessionID`: precisely the failure the header
+ * exists to prevent. So the value is "harness session when present, this constant otherwise".
+ *
+ * A constant is a worse affinity key than a real per-session id and a far better one than none:
+ * it still gives the upstream one consistent key per install. That is the same trade the sibling
+ * `dsh-serenity-hooks` plugin made for the same endpoint, proved on a real host.
+ */
+export declare const OPENCODE_SESSION_FALLBACK = "dsh-any-deepseek";
 /**
  * Presets keyed by a stable id.
  *

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-any-deepseek",
-  "version": "0.0.6",
+  "version": "0.0.8",
   "description": "One DeepSeek V4.1 Flash provider for DeepSeek Harness: paste a key per channel, switch channels manually, token usage booked per real upstream.",
   "license": "MIT",
   "repository": {