dexbot 1.4.15 → 1.4.17

package/docs/GRID_RECONCILE.md

@@ -0,0 +1,259 @@
+# Grid Reconciliation: Distributed State Mismatch in a Single-Threaded Runtime
+
+## The Core Problem
+
+DEXBot2 holds an **intended grid state** — which orders should be on-chain, at what prices and sizes, each assigned a grid slot with an `orderId`. The blockchain holds the **actual state** — the limit orders that physically exist. Fills, partial cancellations, race conditions, and external cancellations or manual order edits cause these to diverge.
+
+| Side | What it holds | Ground truth? |
+|------|---------------|---------------|
+| **Bot model** (`manager.orders`) | Grid slots with target price, size, state, `orderId` | Optimistic — set before confirmation, updated after broadcast |
+| **Blockchain** (BitShares DEX) | Limit orders with ID, price, for_sale, filled | Yes — this is reality |
+
+Reconciliation aligns the bot's model with on-chain reality. It runs at startup when the gap is widest (bot was offline, fills happened, grid may have been regenerated).
+
+### Why Not Cancel Everything
+
+- No atomic cancel+create on BitShares — `cancel_order` cancels the full order; there is no partial size reduction
+- A full teardown leaves the bot unable to trade during the rebuild window
+
+---
+
+## Architecture: 3-Phase Plan-then-Execute
+
+The reconcile runs from [`recalculateGrid`](../modules/order/grid.ts) during startup full-resync. **There is no per-attempt wall-clock race around the reconcile itself** — an outer timeout would fire mid-batch and orphan in-flight broadcasts (the duplicate-accumulation death spiral). The reconcile is bounded only by the 10-minute total resync safety net, and every internal chain read follows the shared guarded-read standard.
+
+Phase 1 does all reasoning in memory under `_gridLock` (fast); Phases 2 and 3 execute outside the lock — holding a lock across RPC calls would block fills, sync, and divergence checks for hundreds of milliseconds each. All execution operations in Phases 2–3 re-acquire `_gridLock` individually (via `synchronizeWithChain` / per-op guards) so the lock is held briefly per operation, never for an entire phase.
+
+Phase 2 and 3 both respect the `dryRun` flag: when true, no on-chain mutations are attempted — plans are logged but not executed.
+
+`targetCount` (per side, `targetSell`/`targetBuy`) is sourced from bot config and determines how many active orders each side should maintain. The internal `planOnly` flag controls whether `_reconcileStartupSide` records plans for Phase 2 or executes inline — Phase 1 always calls with `planOnly=true`.
+
+```
+                    Grid generated
+                            │
+                            ▼
+┌──────────────────────────────────────────────────┐
+│  PHASE 1: Planning (under _gridLock)             │
+│                                                  │
+│  • Sanitize phantom orders (ACTIVE/PARTIAL with  │
+│    orderId absent on-chain → VIRTUAL, skip);     │
+│    defer freshly-assigned orderIds, ghost pass   │
+│  • Detect suspected duplicates (within 5× tol) → │
+│    queue for Phase 2 cancel                      │
+│  • Match unmatched chain orders to virtual slots │
+│    → plan updates                                │
+│  • Detect grid-edge lockup → plan largest-order  │
+│    cancel to free funds                          │
+│  • Detect excess chain orders → plan cancels     │
+│  • No on-chain RPC calls inside this phase       │
+└──────────────────┬───────────────────────────────┘
+                   ▼
+   returns { plannedCreates, plannedUpdates, plannedCancels }
+┌──────────────────────────────────────────────────┐
+│  PHASE 2: Execution (outside _gridLock)          │
+│                                                  │
+│  1. Cancellations — duplicates, edge releases,   │
+│     excess chain orders                          │
+│  2. Updates — batch (3 retries), then sequential │
+│     fallback with per-failure recovery sync      │
+│  3. Creates — outside-in pairing (outermost grid │
+│     slots first, BUY desc / SELL asc), batched   │
+│     where the DEX supports batch creates;        │
+│     uncertain lands adopt; created IDs tracked   │
+│     for Phase-3 protection                       │
+└──────────────────┬───────────────────────────────┘
+                   ▼
+┌──────────────────────────────────────────────────┐
+│  PHASE 3: Fresh Count + Stale Surplus Cleanup    │
+│                                                  │
+│  • Re-fetch chain state after Phase 2 (guarded)  │
+│  • Adopt uncertain-landed creates into VIRTUAL   │
+│    slots                                         │
+│  • Protect Phase-2 created IDs from surplus      │
+│    cancel                                        │
+│  • Cancel orders exceeding per-side target not   │
+│    tracked by any grid slot's orderId (orphans)  │
+└──────────────────────────────────────────────────┘
+```
+
+### Phase 1 — Pure Planning Under `_gridLock`
+
+**`grid_reconcile.ts:205-356`**
+
+1. **Phantom order sanitization** (lines 211-244): For each `isOrderPlaced()` order whose `orderId` is not in the chain snapshot, reset it to VIRTUAL with `skipAccounting` to prevent fund inflation. Two absence-decision guards make this safe:
+   - **Freshly-assigned deferral** (lines 215-233): an `orderId` assigned within `TIMING.SYNC_LOCK_TIMEOUT_MS` (via `manager._orderIdAssignedAt`) may be an in-flight create/adopt whose broadcast has not landed or is not yet visible to a lagging/truncated read — virtualizing it and re-creating would duplicate a real live order (the reconcile-timeout death-spiral root cause). It is skipped (deferred) rather than virtualized.
+   - **Ghost heuristic** (line 225): an order with `size <= 0` && `PARTIAL` (a known filled ghost) still passes through so known fills get cleaned up.
+   - Virtualization always uses `{ skipAccounting: true }` so startup cleanup never inflates `ChainFree`.
+
+2. **Duplicate detection** (lines 246-311): For each unmatched chain order, find the nearest active same-side grid order. If `priceDiff ≤ tolerance × 5`, flag it as a suspected duplicate and queue for a Phase 2 cancel (never cancelled under lock). Tolerance is computed from price impact via `calculatePriceTolerance`: capped at `PRICE_TOLERANCE_MAX_PERCENT` (1%) with a `PRICE_TOLERANCE_MIN_ABSOLUTE` (0.0001) floor. Duplicate IDs are removed from the unmatched set so they aren't also paired for updates/creates.
+
+3. **Per-side reconciliation** via `_reconcileStartupSide(planOnly=true)` (lines 323-353):
+   - Count `matchedOnGrid` (active grid orders with `orderId`)
+   - `neededSlots = targetCount - matchedOnGrid`; pick virtual slots to activate
+   - Match sorted unmatched chain orders to virtual slots → `plannedUpdates`
+   - Detect grid-edge lock and plan a largest-order cancel
+   - Plan creates for remaining slots
+   - Plan excess cancellations (guarded by `matchedOnGrid > 0`)
+
+Returns `{ plannedCreates, plannedUpdates, plannedCancels, chainSellCount, chainBuyCount }`.
+
+### Phase 2 — Blockchain Execution Outside Lock
+
+**`grid_reconcile.ts:358-480`**
+
+Each sub-phase releases `_gridLock` before starting and re-acquires it per operation (through `synchronizeWithChain` in individual helpers). No single long-held lock blocks fills, sync, or divergence checks — but each operation still runs under the lock for consistency.
+
+**Cancellations** (lines 366-391): Execute `plannedCancels`. Each `_cancelChainOrder` acquires `_gridLock` internally. This covers duplicate cancels, edge-release cancels, and excess-order cancels.
+
+**Updates** (lines 393-465):
+- Batch via `_executeStartupUpdateBatch` when `supportsBatchUpdate` is available
+- Retry up to 3× (`maxBatchAttempts = 3`)
+- On each failure: `_recoverStartupSyncFailure()` re-fetches open orders from chain (guarded read) and re-syncs `manager` state via `manager.syncFromOpenOrders()`, then `_refreshStartupUpdatePlans()` rebuilds plans against the fresh chain state
+- If retries exhausted or batch helpers are unavailable → `_executeStartupSequentialUpdateFallback()` one-by-one with per-failure recovery
+
+**Creates** (lines 467-480): `_executePlannedStartupCreates` runs with the outside-in pair grouping — grouped from the outermost grid slots toward the center, BUY descending / SELL ascending, so the most price-critical orders are placed first. BitShares DEX batch-create operations are used where supported. Every created chain ID is captured into `phase2CreatedOrderIds` so Phase 3 cannot later cancel the freshly-created orders.
+
+### Phase 3 — Fresh Re-read, Adoption, Stale Surplus Cleanup
+
+**`grid_reconcile.ts:502-631`** (guarded by `if (!dryRun)` at line 504)
+
+1. **Guarded fresh re-read** (lines 512-516): `readOpenOrdersGuarded` re-fetches all open orders. On a truncated/empty read it returns early (defers), keeping the pre-Phase-2 counts for the summary log — a capped window omits exactly the freshest Phase-2 creates.
+
+2. **Adopt uncertain-landed creates** (lines 533-578): For any fresh chain order not matching a grid `orderId` and not created by a slot, it attempts targeted slot adoption — matching a VIRTUAL slot by type+price+size (within tolerance) and registering it via `_applySync(..., 'createOrder')` with the create-fee deduction. Full `syncFromOpenOrders` is deliberately **not** used here (its pass-1 virtualizes ACTIVE slots missing from the snapshot, and a lagging read right after the Phase-2 broadcast would destroy the confirmed grid). If adoption fails, the ID is still protected from surplus-cancel; the next sync loop's orphan adoption registers it.
+
+3. **Stale surplus cancellation** (lines 579-599): Per side, count orders exceeding `targetCount` that no grid slot holds via `orderId` (including the phase-2 created IDs). Cancel only these untracked surplus orders, sorted by chain ID for determinism. This catches orphans lost during grid reinitialization — on-chain orders with no corresponding grid slot.
+
+### Partial Failure State
+
+If Phase 2 partially succeeds (some cancels, some creates fail), there is no rollback. The bot proceeds with the resulting state. Because the reconcile runs at startup before the fill pipeline activates, no fills are missed during this window. Remaining mismatches are caught by the next maintenance/structural divergence cycle or the next startup reconcile.
+
+### Timeouts and Read Coverage
+
+- **No per-attempt race** around the reconcile itself — the 1.4.8 change removed it to avoid orphaning mid-batch broadcasts (see the [`recalculateGrid`](../modules/order/grid.ts) call site in `modules/order/grid.ts`).
+- The whole resync is bounded by a **10-minute total timeout** (`PIPELINE_TIMING.TIMEOUT_MS * 2` at `grid.ts:1122`), applied via `Promise.race` at `grid.ts:1217`.
+- Every internal chain read goes through `readOpenOrdersGuarded` (`chain_orders.ts:611`) with the 30s / 3-retry / node-failover standard, and empty/truncated reads are treated as **ambiguous** — never as authoritative absence.
+
+---
+
+## Edge Cases (All Hit in Production or Code Review)
+
+### Fresh Grid Guard (`matchedOnGrid > 0`)
+
+**`grid_reconcile_internal.ts:1604-1616`**
+
+When a brand-new grid is generated, every slot is VIRTUAL — `matchedOnGrid = 0`. Without a guard, every on-chain order appears "unmatched" and would be cancelled as excess:
+
+```typescript
+if (matchedOnGrid > 0 || neededSlots === 0) {
+    cancelCount = Math.max(0, chainCount - targetCount);
+}
+```
+
+When `matchedOnGrid === 0` AND scaling up (`neededSlots > 0`), excess cancellation is skipped — the guard covers both the fresh-grid scenario and the scale-down case (`neededSlots === 0`). Stale duplicates are still caught by the SUSPECTED DUPLICATE detection in Phase 1 of `reconcileGridOrders`.
+
+### Grid-Edge Lock
+
+**`grid_reconcile_internal.ts:259`** — `_isGridEdgeFullyActive` detects when the grid boundary is fully active (all slots on-chain) before cancelling excess orders.
+
+When all outermost orders of a side are ACTIVE with `orderId`, all balance is committed to the edges. Cancel the **largest** order among the update candidates (`_cancelLargestOrder`, line 329) to free maximum funds with minimum operations, since the DEX does not expose partial-reduce in one operation. The cancelled slot gets a replacement create.
+
+Detection (`_isGridEdgeFullyActive`, line 259): sort orders by price (BUY descending, SELL ascending), and check the outermost ones are all `isOrderPlaced()`.
+
+### Duplicate Tolerance (5× Multiplier)
+
+**`grid_reconcile.ts:246-311`**
+
+`SUSPECTED_DUPLICATE_TOLERANCE_MULTIPLIER = 5`. An unmatched chain order within 5× price tolerance of an active same-type grid slot is a suspected duplicate → queued for Phase 2 cancellation (not cancelled under lock). The base tolerance comes from `calculatePriceTolerance`, which estimates the maximum acceptable price deviation for the order's size and the grid's price step.
+
+### Batch Update Failure Recovery
+
+**`grid_reconcile.ts:393-465`**
+
+Up to 3 batch attempts. Each failure triggers a recovery sync + plan refresh. If all plans are empty → resolved early. After 3× → sequential fallback with per-plan recovery (each individual failure triggers a recovery sync + queue refresh).
+
+### Phantom Orders via Reconcile
+
+**`grid_reconcile.ts:211-244`** — Reconcile's role in the defense-in-depth: during Phase 1, any ACTIVE/PARTIAL order whose `orderId` is not found on-chain is reset to VIRTUAL with `skipAccounting`. The freshly-assigned deferral protects in-flight broadcasts, and the ghost heuristic lets known fills pass. See [`developer_guide.md`](developer_guide.md#phantom-orders-prevention-defense-in-depth) for the full 3-layer defense.
+
+### COW Interaction
+
+Reconcile Phase 1 runs under `_gridLock` with no side effects on the frozen master Map. The working grid is not involved — reconcile is a startup operation that runs before the COW pipeline is active. See [`COPY_ON_WRITE_MASTER_PLAN.md`](COPY_ON_WRITE_MASTER_PLAN.md#safety-guardrails) and [`COW_INVARIANTS.md`](COW_INVARIANTS.md#reconcile-grid_reconcilemd) for COW rules.
+
+### Truncated-Read Ambiguity (since 1.4.8)
+
+Every chain read feeding an absence/surplus decision goes through `readOpenOrdersGuarded` (`chain_orders.ts:611`) and treats an empty or truncated snapshot as **unreadable** — never as "nothing landed" or "nothing to cancel":
+
+- `_recoverSyncFromChain` (`grid_reconcile_internal.ts:607`) — plus its three recovery sites in `_createOrderFromGrid` / `_cancelChainOrder` — defers on empty/truncated reads (`deferEmpty: true`). A pass-1 phantom cleanup would otherwise virtualize live slots from a partial window.
+- `_adoptPossiblyLandedCreate` (`grid_reconcile_internal.ts:947`) defers to an uncertain outcome on truncated reads, and the startup group batch uncertain verification follows the same rule.
+- Phase 3 final refresh (`grid_reconcile.ts:512`) skips adoption/surplus-cancel on a truncated read, keeping the pre-phase-2 counts for the summary log.
+- Adoption paths (`_adoptPossiblyLandedCreate`, grouping path, reconcile adoption loop) apply the create-fee deduction via `_applySync` for accounting parity.
+
+The underlying rule is `INV-BROADCAST-004`: a capped `get_full_accounts` window omits the freshest orders (fresh creates sort last), so absence can never be authoritative on a truncated read.
+
+---
+
+## Lock Hierarchy
+
+**`manager.ts:471-486`** — canonical reference in [`developer_guide.md`](developer_guide.md#lock-ordering-for-deadlock-prevention).
+
+```
+Level 0: _fillProcessingLock    Level 1: _divergenceLock
+Level 2: _syncLock              Level 3: _gridLock
+Level 4: _fundLock
+```
+
+Acquire in ascending level order only. AsyncLock is re-entrant (nested `acquire()` run directly, not queued).
+
+### Historical Correction (1.4.6)
+
+Before 1.4.6, `_syncLock` was Level 3 and `_gridLock` was Level 2, causing ABBA deadlock when reconcile needed `_gridLock` (old Level 2) while holding `_syncLock` (old Level 3). The workaround flag `gridLockAlreadyHeld` patched 8 call sites.
+
+Commit `705cde9c` fixed it: swapped levels (`_syncLock → 2`, `_gridLock → 3`), eliminated the flag, and restructured Phase 1 to be purely in-memory so no RPC calls run under `_gridLock` ([`developer_guide.md` §Startup Sequence](developer_guide.md#startup-sequence--lock-ordering)).
+
+### Nesting Safety (1.4.6)
+
+Commit `e64db685` replaced 6 single-value boolean state fields with refcounts/stacks to prevent premature resume from re-entrant nested acquisitions.
+
+---
+
+## Key Constants
+
+| Constant | Value | File | Role |
+|----------|-------|------|------|
+| `SUSPECTED_DUPLICATE_TOLERANCE_MULTIPLIER` | `5` | `grid_reconcile.ts:20` | Amplifies base tolerance for duplicate detection |
+| `maxBatchAttempts` | `3` | `grid_reconcile.ts:415` | Update-batch retry limit |
+| `PRICE_TOLERANCE_MAX_PERCENT` | `0.01` (1%) | `constants.ts:452` | Cap on price tolerance |
+| `PRICE_TOLERANCE_MIN_ABSOLUTE` | `0.0001` | `constants.ts:456` | Floor for price tolerance |
+| `PIPELINE_TIMING.TIMEOUT_MS` | `300000` (5min) | `constants.ts:805` | Base pipeline timing; resync uses 2× (10 min) |
+
+---
+
+## Testing Coverage
+
+| Test File | Coverage |
+|-----------|----------|
+| `tests/test_grid_reconcile.ts` | 8: grid detection, largest-order cancel, ordering |
+| `tests/test_grid_reconcile_regressions.ts` | 6: unmatched-cancel guard, verifiedAfterFailure, slot-mapped skip, storeGrid await, `matchedOnGrid` guard, Phase 3 surplus; plus 1.4.8 regression 1b (empty refetch after verified cancel defers) |
+| `tests/test_resync_duplicate_race.ts` | Phase 3 duplicate race |
+| `tests/test_resync_balance_fix.ts` | Fund reuse during Phase 3 |
+| `tests/test_resync_invariants.ts` | Fund invariant suppression during transient resync |
+| `tests/test_uncertain_broadcast.ts` | Startup uncertain-create adoption + truncated-read deferral (UNC-013e–g, 1.4.8) |
+| `tests/test_race_condition_fixes_batch1.ts` | ABBA deadlock (RC-1B) |
+| `tests/test_async_lock_force_release.ts` | Nested multi-lock re-entrancy |
+| `tests/test_targeted_drift_reconcile.ts` | Active-order shortfall triggers sync |
+| `tests/repro_phantom_orders.ts` | Phantom order prevention |
+
+---
+
+## File Reference
+
+| File | Role |
+|------|------|
+| `modules/order/grid_reconcile.ts` | Public API + 3-phase orchestrator (642 lines) |
+| `modules/order/grid_reconcile_internal.ts` | Internal helpers — `_reconcileStartupSide`, grid detection, recovery, uncertainty (1690 lines) |
+| `modules/order/manager.ts` | Lock hierarchy definition, `_applyOrderUpdate`, phantom guard, `reconcileGrid` entry, COW integration |
+| `modules/order/async_lock.ts` | AsyncLock engine with ALS re-entrancy (424 lines) |
+| `modules/order/sync_engine.ts` | Blockchain sync pipeline |
+| `modules/order/grid.ts` | Grid creation, `recalculateGrid` (full resync) calls reconcile |
+| `modules/chain_orders.ts` | `readOpenOrdersGuarded` / guarded read infrastructure |
+| `modules/constants.ts` | Timing, tolerance, retry constants |

package/docs/LOGGING.md

@@ -0,0 +1,318 @@
+# DEXBot2 Logging System
+
+## Quick Start
+
+Edit `profiles/general.settings.json` to configure logging:
+
+```json
+{
+  "LOG_LEVEL": "info",
+  "LOGGING_CONFIG": {
+    "categories": {
+      "fundChanges": { "enabled": false },
+      "orderStateChanges": { "enabled": true },
+      "fillEvents": { "enabled": true },
+      "boundaryEvents": { "enabled": true }
+    }
+  }
+}
+```
+
+### Enable JSON Output
+
+```json
+{
+  "LOGGING_CONFIG": {
+    "json": { "enabled": true }
+  }
+}
+```
+
+Writes JSON lines to log files alongside human-readable console output — zero impact on terminal.
+
+---
+
+## Architecture
+
+All log calls go through the centralized `Logger` class (`modules/order/logger.ts`), which handles console output, batched async file writes, size-based rotation, optional JSON lines, and correlation ID tracing. Callers only interact with `logger.log()`, `logger.info()`, etc. — queueing, rotation, and I/O are internal.
+
+```
+Module → Logger.log() ──┬→ console (stdout/stderr)
+                        └→ write queue → file (100ms batch)
+                              + rotation (total 1.1GB budget, 10 rotated files)
+                              + JSON lines (optional)
+```
+
+---
+
+## Log Levels
+
+| Level | Value | Default | Color | When It Appears |
+|-------|-------|---------|-------|-----------------|
+| **debug** | 0 | No | Cyan | Calculation details, fund change tracking |
+| **info** | 1 | **Yes** | White | State changes, fills, order placement, boundary events |
+| **warn** | 2 | No | Yellow | Non-critical issues, recovery attempts, edge cases |
+| **error** | 3 | No | Red | Broadcast failures, sustained fill errors (10+ fails or 5min+) |
+| **critical** | 4 | No | Bright red | Fill-consumer cascade (20+ fails or 15min+) — permanent fault signal |
+
+The default `LOG_LEVEL` is `"info"`. For production or minimal output, set to `"warn"` (see the Production config below).
+
+---
+
+## Logging Categories
+
+6 independently enablable categories:
+
+| Category | Default Level | Default | Purpose |
+|----------|--------------|---------|---------|
+| **fundChanges** | debug | on | Fund balance updates in detail |
+| **orderStateChanges** | info | on | Order placement, cancellation, state transitions |
+| **fillEvents** | info | on | Fill processing and fund updates |
+| **boundaryEvents** | info | on | Grid boundary adjustments and recovery |
+| **errorWarnings** | warn | on | Critical issues, all errors and warnings |
+| **edgeCases** | warn | on | Unusual conditions that don't cause errors |
+
+### Production config (-90%)
+
+```json
+{
+  "LOG_LEVEL": "warn",
+  "LOGGING_CONFIG": {
+    "categories": {
+      "fundChanges": { "enabled": false },
+      "orderStateChanges": { "enabled": false },
+      "fillEvents": { "enabled": false },
+      "boundaryEvents": { "enabled": false }
+    }
+  }
+}
+```
+
+### Debug config (full verbosity)
+
+```json
+{
+  "LOG_LEVEL": "debug",
+  "LOGGING_CONFIG": {
+    "changeTracking": { "enabled": true },
+    "categories": {
+      "fundChanges": { "enabled": true },
+      "orderStateChanges": { "enabled": true },
+      "fillEvents": { "enabled": true },
+      "boundaryEvents": { "enabled": true },
+      "errorWarnings": { "enabled": true },
+      "edgeCases": { "enabled": true }
+    },
+    "display": {
+      "fundStatus": { "enabled": true, "showDetailed": true },
+      "statusSummary": { "enabled": false }
+    }
+  }
+}
+```
+
+---
+
+## Display Features
+
+| Feature | Default | Method | Purpose |
+|---------|---------|--------|---------|
+| **fundStatus** | off | `logFundsStatus(mgr, ctx, force)` | Detailed fund breakdown |
+| **statusSummary** | off | `displayStatus(mgr, force)` | Comprehensive account/order status |
+
+```json
+{
+  "LOGGING_CONFIG": {
+    "display": {
+      "fundStatus": { "enabled": true, "showDetailed": true },
+      "statusSummary": { "enabled": true }
+    }
+  }
+}
+```
+
+---
+
+## Log Rotation
+
+```json
+{
+  "LOGGING_CONFIG": {
+    "rotation": {
+      "enabled": true,
+      "maxSize": 1181116007,
+      "maxFiles": 10
+    }
+  }
+}
+```
+
+| Field | Default | Description |
+|-------|---------|-------------|
+| `enabled` | `true` | Enable/disable rotation |
+| `maxSize` | 1.1GB | **Total** disk budget for all log files (current + rotated). Per-file limit = `maxSize / (maxFiles + 1)`. |
+| `maxFiles` | `10` | Rotated files to keep; older files pruned |
+
+Example: 1.1GB budget with 10 rotated files → each file rotates at ~100MB, max total ~1.1GB.
+
+Under PM2, rotation is auto-suppressed — PM2 handles its own log files.
+
+---
+
+## JSON Structured Output
+
+When enabled, each `log()` call writes a JSON line to the log file:
+
+```json
+{"timestamp":"2026-06-12T10:30:00.123Z","level":"INFO","category":"DEXBot","message":"Fill processed: 100 OPEN @ 0.5432","correlationId":"fill-abc-123"}
+```
+
+| Field | Always | Description |
+|-------|--------|-------------|
+| `timestamp` | Yes | ISO 8601 |
+| `level` | Yes | Uppercase (`DEBUG`, `INFO`, `WARN`, `ERROR`, `CRITICAL`) |
+| `category` | Yes | Logger category |
+| `message` | Yes | Raw message, no ANSI codes |
+| `correlationId` | No | Present when `setCorrelationId()` was called |
+
+---
+
+## Correlation IDs
+
+Trace a single operation (e.g. a fill) across log lines:
+
+```typescript
+logger.setCorrelationId('fill-abc-123');
+```
+
+Included in JSON output when present. Propagate to child loggers:
+
+```typescript
+const child = new Logger('Accounting', { correlationId: parent.correlationId });
+```
+
+---
+
+## Change Detection
+
+`LoggerState` prevents redundant logs by tracking previous values:
+
+- Ignores fund changes < 0.00000001 (8 decimals)
+- Ignores price changes < 0.0001 (4 decimals)
+
+| Config Profile | Output Reduction | Lines/Cycle |
+|---|---|---|
+| Production | 90%+ | ~10 |
+| Standard | 40-50% | ~100-150 |
+| Debug | 0% | ~200+ |
+
+Force output even if unchanged:
+
+```javascript
+manager.logger.logFundsStatus(manager, ctx, true)
+manager.logger.displayStatus(manager, true)
+```
+
+---
+
+## Log Tags Reference
+
+Prefix tags used in log messages to help operators identify event types. To find every call site of a tag, run: `rg -F "[TAG]" modules/`. This list covers the most operator-visible tags; the full set grows with the codebase.
+
+| Tag | Module | Example |
+|-----|--------|---------|
+| `[COW]` | `dexbot_cow_runtime.ts`, `order/manager.ts`, `dexbot_state_recovery.ts` | Copy-on-write grid rebalance planning and broadcast |
+| `[SYNC]` | `order/sync_engine.ts`, `order/manager.ts` | Blockchain order synchronization |
+| `[RECOVERY]` | `dexbot_state_recovery.ts`, `order/accounting.ts` | Fund invariant recovery attempts and resets |
+| `[ORPHAN-FILL]` | `dexbot_fill_runtime.ts` | Double-credit prevention for stale-cleaned orders |
+| `[HARD-ABORT]` | `dexbot_state_recovery.ts`, `dexbot_class.ts` | Illegal state during batch processing |
+| `[FILL-QUEUE]` | `dexbot_fill_runtime.ts` | Fill consumer health, backoff, and escalation |
+| `[CREDENTIAL]` | `dexbot_class.ts` | Credential daemon errors, key unlock failures |
+| `[BOOTSTRAP]` | `dexbot_fill_runtime.ts` | Startup fill/order reconciliation |
+| `[VALIDATION]` | `dexbot_cow_runtime.ts` | Order/config validation errors |
+| `[POST-RESET]` | `dexbot_startup_runtime.ts` | Post-AMA-reset fill queue processing |
+| `[STALE-CLEANUP]` | `dexbot_fill_runtime.ts` | Pruning expired stale-cleaned order IDs |
+| `[SELF-CANCEL]` | `dexbot_fill_runtime.ts` | Skipping non-economic fill artifacts |
+| `[FILL-DEDUP]` | `dexbot_fill_runtime.ts` | Fill deduplication events |
+| `[MAINT-COOLDOWN]` | `dexbot_maintenance_runtime.ts` | Maintenance cooldown after hard-abort recovery |
+| `[DUST]` | `dexbot_maintenance_runtime.ts` | Dust order cancellation, health check, and truncation fallback |
+| `[BTS-ACQ]` | `dexbot_maintenance_runtime.ts` | BTS acquisition for non-BTS pairs |
+| `[TARGETED-SYNC]` | `dexbot_maintenance_runtime.ts` | Targeted drift synchronization deferral |
+| `[MULTI-BOT]` | `chain_orders.ts` | Multi-bot shared-account coordination |
+| `[BTS-FEE]` | `order/accounting.ts` | BTS fee deferred accounting |
+| `[SPREAD-CORRECTION]` | `order/grid.ts` | Partial order spread correction |
+| `[STRATEGY]` | `order/strategy.ts` | Fee event cache and strategy decisions |
+| `[RECONCILE]` | `order/utils/validate.ts` | Grid reconciliation ([GRID_RECONCILE.md](GRID_RECONCILE.md)) |
+| `[TRANSPORT]` | `bitshares-native/transport.ts` | WebSocket keep-alive and reconnect |
+
+## 1.4.8 Markers
+
+New/updated operator-visible messages added by the uncertain-broadcast and COW hardening work:
+
+| Message | Meaning |
+|---------|---------|
+| `[COW] Dropping stale-slot ... > plan boundary ...` | Stale-placement guard vetoed a CREATE/UPDATE that crosses the plan's own target boundary (deferred to next cycle) |
+| `[COW] Stale-placement guard removed N placement(s)` | Summary emitted when the guard filters actions |
+| `[COW] Plan stale pre-broadcast (...); re-planning once from fresh master` | Pre-broadcast staleness guard fired; bounded re-plan in progress |
+| `[COW] Re-plan produced no executable actions; grid is already consistent post-fills, skipping stale plan` | Re-plan confirmed the grid is consistent; the stale plan was not shipped |
+| `[COW] Commit refused after broadcast; adopting placed orders from chain` | Master changed mid-broadcast; placed orders adopted so on-chain state converges |
+| `[COW] Refusing to commit working grid: base version ... != current ...` | Version-mismatch commit refusal (`evaluateCommit`) |
+| `[BROADCAST_DEADLINE]` / `BroadcastUncertainError` | Typed uncertain outcome — the daemon never re-signed; verify-before-retry engages |
+| `⚠ FAILED attempt N/3` / `✗ BLACKLISTED after N failures` | Daemon node health ledger — per-node retry exhaustion then blacklist |
+| `[DUST] Chain refetch after verified cancel is TRUNCATED/EMPTY; applying local cancel sync` | Truncated-read fallback in the dust-cancel refetch path |
+| `authoritative absence verified` | Aligned retry log wording — re-broadcast only on provable absence |
+
+---
+
+## Fill History Scan Profiling
+
+The `Subscriptions` logger emits `fetchFillHistoryEntries: maxPages (X) reached` at `debug` level when the fill-history scan reaches its configured page cap. On a busy account this is **normal** — the scan simply catches up over multiple polling cycles rather than in a single pass.
+
+If the message recurs across many cycles **without any new fills being detected** (i.e. `maxPages` is hit but `highestReceived` never advances), the connected witness node is likely running with `--partial-operations` pruning enabled. This removes old `operation_history_objects` from the `by_op` index, so the scan can never re-fill the gap because the entries no longer exist on-chain.
+
+**Operator checklist:**
+1. Confirm the node config does not enable `--partial-operations` (or that the retention window covers the gap).
+2. Restart the node after adjusting the config so the full `by_op` index is rebuilt.
+3. If a full node is unavailable, point the bot at an archive endpoint for the initial history scan; subsequent incremental scans only need recent history.
+
+---
+
+## FAQ
+
+**Q: How much output reduction can I expect?**
+- Standard config: 40-50%
+- Production config: 90%+
+- Debug config: 0% (all logs)
+
+**Q: Do I need to change my code?**
+No. All existing `logger.log()` calls work unchanged.
+
+**Q: How is config loaded?**
+Defaults in `modules/constants.ts` → deep merged with `profiles/general.settings.json` → frozen (immutable).
+
+**Q: Can I customize logging per bot?**
+Yes — each bot entry in `profiles/bots.json` accepts an optional `logging` field:
+
+```json
+{
+  "name": "EXAMPLE-BOT",
+  "logging": {
+    "level": "debug",
+    "config": {
+      "json": { "enabled": true },
+      "categories": {
+        "fundChanges": { "enabled": false }
+      }
+    }
+  },
+  ...
+}
+```
+
+The per-bot `logging` is deep-merged on top of the global config from `general.settings.json`. See `modules/types.ts` (`BotLoggingOverrides`), `modules/runtime_settings.ts`, and `modules/order/manager.ts` for the wiring.
+
+**Q: What about PM2?**
+The logger auto-detects PM2 and suppresses file writes (PM2 captures stdout/stderr). File rotation is also suppressed under PM2.
+
+**Q: Are log lines lost on crash?**
+Queued-but-unwritten lines could be lost. Critical errors go to stderr immediately (PM2 captures those). Queue drains every 100ms. Call `flush()` on shutdown.