dexbot 1.4.11 → 1.4.13

package/claw/node_modules/bytebuffer/src/methods/fill.js

@@ -0,0 +1,35 @@
+/**
+ * Overwrites this ByteBuffer's contents with the specified value. Contents are the bytes between
+ *  {@link ByteBuffer#offset} and {@link ByteBuffer#limit}.
+ * @param {number|string} value Byte value to fill with. If given as a string, the first character is used.
+ * @param {number=} begin Begin offset. Will use and increase {@link ByteBuffer#offset} by the number of bytes
+ *  written if omitted. defaults to {@link ByteBuffer#offset}.
+ * @param {number=} end End offset, defaults to {@link ByteBuffer#limit}.
+ * @returns {!ByteBuffer} this
+ * @expose
+ * @example `someByteBuffer.clear().fill(0)` fills the entire backing buffer with zeroes
+ */
+ByteBufferPrototype.fill = function(value, begin, end) {
+    //? RELATIVE(undefined, 'begin');
+    if (typeof value === 'string' && value.length > 0)
+        value = value.charCodeAt(0);
+    if (typeof begin === 'undefined') begin = this.offset;
+    if (typeof end === 'undefined') end = this.limit;
+    if (!this.noAssert) {
+        //? ASSERT_INTEGER('value');
+        //? ASSERT_RANGE();
+    }
+    if (begin >= end)
+        return this; // Nothing to fill
+    //? if (NODE) {
+    this.buffer.fill(value, begin, end);
+    begin = end;
+    //? } else if (DATAVIEW) {
+    while (begin < end) this.view.setUint8(begin++, value);
+    //? } else {
+    while (begin < end) this.view[begin++] = value;
+    //? }
+    if (relative) this.offset = begin;
+    return this;
+};
+

package/claw/node_modules/bytebuffer/src/methods/flip.js

@@ -0,0 +1,11 @@
+/**
+ * Makes this ByteBuffer ready for a new sequence of write or relative read operations. Sets `limit = offset` and
+ *  `offset = 0`. Make sure always to flip a ByteBuffer when all relative read or write operations are complete.
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.flip = function() {
+    this.limit = this.offset;
+    this.offset = 0;
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/mark.js

@@ -0,0 +1,17 @@
+/**
+ * Marks an offset on this ByteBuffer to be used later.
+ * @param {number=} offset Offset to mark. Defaults to {@link ByteBuffer#offset}.
+ * @returns {!ByteBuffer} this
+ * @throws {TypeError} If `offset` is not a valid number
+ * @throws {RangeError} If `offset` is out of bounds
+ * @see ByteBuffer#reset
+ * @expose
+ */
+ByteBufferPrototype.mark = function(offset) {
+    offset = typeof offset === 'undefined' ? this.offset : offset;
+    if (!this.noAssert) {
+        //? ASSERT_OFFSET();
+    }
+    this.markedOffset = offset;
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/order.js

@@ -0,0 +1,36 @@
+/**
+ * Sets the byte order.
+ * @param {boolean} littleEndian `true` for little endian byte order, `false` for big endian
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.order = function(littleEndian) {
+    if (!this.noAssert) {
+        if (typeof littleEndian !== 'boolean')
+            throw TypeError("Illegal littleEndian: Not a boolean");
+    }
+    this.littleEndian = !!littleEndian;
+    return this;
+};
+
+/**
+ * Switches (to) little endian byte order.
+ * @param {boolean=} littleEndian Defaults to `true`, otherwise uses big endian
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.LE = function(littleEndian) {
+    this.littleEndian = typeof littleEndian !== 'undefined' ? !!littleEndian : true;
+    return this;
+};
+
+/**
+ * Switches (to) big endian byte order.
+ * @param {boolean=} bigEndian Defaults to `true`, otherwise uses little endian
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.BE = function(bigEndian) {
+    this.littleEndian = typeof bigEndian !== 'undefined' ? !bigEndian : false;
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/prepend.js

@@ -0,0 +1,87 @@
+/**
+ * Prepends some data to this ByteBuffer. This will overwrite any contents before the specified offset up to the
+ *  prepended data's length. If there is not enough space available before the specified `offset`, the backing buffer
+ *  will be resized and its contents moved accordingly.
+ //? if (NODE) {
+ * @param {!ByteBuffer|string||!Buffer} source Data to prepend. If `source` is a ByteBuffer, its offset will be modified
+ *  according to the performed read operation.
+ //? } else {
+ * @param {!ByteBuffer|string|!ArrayBuffer} source Data to prepend. If `source` is a ByteBuffer, its offset will be
+ *  modified according to the performed read operation.
+ //? }
+ * @param {(string|number)=} encoding Encoding if `data` is a string ("base64", "hex", "binary", defaults to "utf8")
+ * @param {number=} offset Offset to prepend at. Will use and decrease {@link ByteBuffer#offset} by the number of bytes
+ *  prepended if omitted.
+ * @returns {!ByteBuffer} this
+ * @expose
+ * @example A relative `00<01 02 03>.prepend(<04 05>)` results in `<04 05 01 02 03>, 04 05|`
+ * @example An absolute `00<01 02 03>.prepend(<04 05>, 2)` results in `04<05 02 03>, 04 05|`
+ */
+ByteBufferPrototype.prepend = function(source, encoding, offset) {
+    if (typeof encoding === 'number' || typeof encoding !== 'string') {
+        offset = encoding;
+        encoding = undefined;
+    }
+    //? RELATIVE();
+    if (!this.noAssert) {
+        //? ASSERT_OFFSET();
+    }
+    if (!(source instanceof ByteBuffer))
+        source = ByteBuffer.wrap(source, encoding);
+    var len = source.limit - source.offset;
+    if (len <= 0) return this; // Nothing to prepend
+    var diff = len - offset;
+    if (diff > 0) { // Not enough space before offset, so resize + move
+        //? if (NODE) {
+        var buffer = new Buffer(this.buffer.length + diff);
+        this.buffer.copy(buffer, len, offset, this.buffer.length);
+        this.buffer = buffer;
+        //? } else if (DATAVIEW) {
+        var buffer = new ArrayBuffer(this.buffer.byteLength + diff);
+        var arrayView = new Uint8Array(buffer);
+        arrayView.set(new Uint8Array(this.buffer).subarray(offset, this.buffer.byteLength), len);
+        this.buffer = buffer;
+        this.view = new DataView(buffer);
+        //? } else {
+        var buffer = new ArrayBuffer(this.buffer.byteLength + diff);
+        var view = new Uint8Array(buffer);
+        view.set(this.view.subarray(offset, this.buffer.byteLength), len);
+        this.buffer = buffer;
+        this.view = view;
+        //? }
+        this.offset += diff;
+        if (this.markedOffset >= 0) this.markedOffset += diff;
+        this.limit += diff;
+        offset += diff;
+    }/*? if (!NODE) { */ else {
+        var arrayView = new Uint8Array(this.buffer);
+    }
+    //? }
+    //? if (NODE)
+    source.buffer.copy(this.buffer, offset - len, source.offset, source.limit);
+    //? else if (DATAVIEW)
+    arrayView.set(new Uint8Array(source.buffer).subarray(source.offset, source.limit), offset - len);
+    //? else
+    this.view.set(source.view.subarray(source.offset, source.limit), offset - len);
+
+    source.offset = source.limit;
+    if (relative)
+        this.offset -= len;
+    return this;
+};
+
+/**
+ * Prepends this ByteBuffer to another ByteBuffer. This will overwrite any contents before the specified offset up to the
+ *  prepended data's length. If there is not enough space available before the specified `offset`, the backing buffer
+ *  will be resized and its contents moved accordingly.
+ * @param {!ByteBuffer} target Target ByteBuffer
+ * @param {number=} offset Offset to prepend at. Will use and decrease {@link ByteBuffer#offset} by the number of bytes
+ *  prepended if omitted.
+ * @returns {!ByteBuffer} this
+ * @expose
+ * @see ByteBuffer#prepend
+ */
+ByteBufferPrototype.prependTo = function(target, offset) {
+    target.prepend(this, offset);
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/printDebug.js

@@ -0,0 +1,16 @@
+//? if (DEBUG) {
+/**
+ * Prints debug information about this ByteBuffer's contents.
+ * @param {function(string)=} out Output function to call, defaults to console.log
+ * @expose
+ */
+ByteBufferPrototype.printDebug = function(out) {
+    if (typeof out !== 'function') out = console.log.bind(console);
+    out(
+        this.toString()+"\n"+
+        "-------------------------------------------------------------------\n"+
+        this.toDebug(/* columns */ true)
+    );
+};
+
+//? }

package/claw/node_modules/bytebuffer/src/methods/remaining.js

@@ -0,0 +1,9 @@
+/**
+ * Gets the number of remaining readable bytes. Contents are the bytes between {@link ByteBuffer#offset} and
+ *  {@link ByteBuffer#limit}, so this returns `limit - offset`.
+ * @returns {number} Remaining readable bytes. May be negative if `offset > limit`.
+ * @expose
+ */
+ByteBufferPrototype.remaining = function() {
+    return this.limit - this.offset;
+};

package/claw/node_modules/bytebuffer/src/methods/reset.js

@@ -0,0 +1,17 @@
+/**
+ * Resets this ByteBuffer's {@link ByteBuffer#offset}. If an offset has been marked through {@link ByteBuffer#mark}
+ *  before, `offset` will be set to {@link ByteBuffer#markedOffset}, which will then be discarded. If no offset has been
+ *  marked, sets `offset = 0`.
+ * @returns {!ByteBuffer} this
+ * @see ByteBuffer#mark
+ * @expose
+ */
+ByteBufferPrototype.reset = function() {
+    if (this.markedOffset >= 0) {
+        this.offset = this.markedOffset;
+        this.markedOffset = -1;
+    } else {
+        this.offset = 0;
+    }
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/resize.js

@@ -0,0 +1,39 @@
+/**
+ * Resizes this ByteBuffer to be backed by a buffer of at least the given capacity. Will do nothing if already that
+ *  large or larger.
+ * @param {number} capacity Capacity required
+ * @returns {!ByteBuffer} this
+ * @throws {TypeError} If `capacity` is not a number
+ * @throws {RangeError} If `capacity < 0`
+ * @expose
+ */
+ByteBufferPrototype.resize = function(capacity) {
+    if (!this.noAssert) {
+        //? ASSERT_INTEGER('capacity');
+        if (capacity < 0)
+            throw RangeError("Illegal capacity: 0 <= "+capacity);
+    }
+    //? if (NODE) {
+    if (this.buffer.length < capacity) {
+        var buffer = new Buffer(capacity);
+        this.buffer.copy(buffer);
+        this.buffer = buffer;
+    }
+    //? } else {
+    if (this.buffer.byteLength < capacity) {
+        //? if (DATAVIEW) {
+        var buffer = new ArrayBuffer(capacity);
+        new Uint8Array(buffer).set(new Uint8Array(this.buffer));
+        this.buffer = buffer;
+        this.view = new DataView(buffer);
+        //? } else {
+        var buffer = new ArrayBuffer(capacity);
+        var view = new Uint8Array(buffer);
+        view.set(this.view);
+        this.buffer = buffer;
+        this.view = view;
+        //? }
+    }
+    //? }
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/reverse.js

@@ -0,0 +1,25 @@
+/**
+ * Reverses this ByteBuffer's contents.
+ * @param {number=} begin Offset to start at, defaults to {@link ByteBuffer#offset}
+ * @param {number=} end Offset to end at, defaults to {@link ByteBuffer#limit}
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.reverse = function(begin, end) {
+    if (typeof begin === 'undefined') begin = this.offset;
+    if (typeof end === 'undefined') end = this.limit;
+    if (!this.noAssert) {
+        //? ASSERT_RANGE();
+    }
+    if (begin === end)
+        return this; // Nothing to reverse
+    //? if (NODE)
+    Array.prototype.reverse.call(this.buffer.slice(begin, end));
+    //? else if (DATAVIEW) {
+    Array.prototype.reverse.call(new Uint8Array(this.buffer).subarray(begin, end));
+    this.view = new DataView(this.buffer); // FIXME: Why exactly is this necessary?
+    //? } else {
+    Array.prototype.reverse.call(this.view.subarray(begin, end));
+    //? }
+    return this;
+};

package/claw/node_modules/bytebuffer/src/methods/skip.js

@@ -0,0 +1,19 @@
+/**
+ * Skips the next `length` bytes. This will just advance
+ * @param {number} length Number of bytes to skip. May also be negative to move the offset back.
+ * @returns {!ByteBuffer} this
+ * @expose
+ */
+ByteBufferPrototype.skip = function(length) {
+    if (!this.noAssert) {
+        //? ASSERT_INTEGER('length');
+    }
+    var offset = this.offset + length;
+    if (!this.noAssert) {
+        if (offset < 0 || offset > /*?= CAPACITY */)
+            throw RangeError("Illegal length: 0 <= "+this.offset+" + "+length+" <= "+/*?= CAPACITY */);
+    }
+    this.offset = offset;
+    return this;
+};
+

package/claw/node_modules/bytebuffer/src/methods/slice.js

@@ -0,0 +1,18 @@
+/**
+ * Slices this ByteBuffer by creating a cloned instance with `offset = begin` and `limit = end`.
+ * @param {number=} begin Begin offset, defaults to {@link ByteBuffer#offset}.
+ * @param {number=} end End offset, defaults to {@link ByteBuffer#limit}.
+ * @returns {!ByteBuffer} Clone of this ByteBuffer with slicing applied, backed by the same {@link ByteBuffer#buffer}
+ * @expose
+ */
+ByteBufferPrototype.slice = function(begin, end) {
+    if (typeof begin === 'undefined') begin = this.offset;
+    if (typeof end === 'undefined') end = this.limit;
+    if (!this.noAssert) {
+        //? ASSERT_RANGE();
+    }
+    var bb = this.clone();
+    bb.offset = begin;
+    bb.limit = end;
+    return bb;
+};

package/claw/node_modules/bytebuffer/src/methods/static/accessor.js

@@ -0,0 +1,13 @@
+/**
+ * Gets the accessor type.
+ * @returns {Function} `Buffer` under node.js, `Uint8Array` respectively `DataView` in the browser (classes)
+ * @expose
+ */
+ByteBuffer.accessor = function() {
+    //? if (NODE)
+    return Buffer;
+    //? else if (DATAVIEW)
+    return DataView;
+    //? else
+    return Uint8Array;
+};

package/claw/node_modules/bytebuffer/src/methods/static/allocate.js

@@ -0,0 +1,14 @@
+/**
+ * Allocates a new ByteBuffer backed by a buffer of the specified capacity.
+ * @param {number=} capacity Initial capacity. Defaults to {@link ByteBuffer.DEFAULT_CAPACITY}.
+ * @param {boolean=} littleEndian Whether to use little or big endian byte order. Defaults to
+ *  {@link ByteBuffer.DEFAULT_ENDIAN}.
+ * @param {boolean=} noAssert Whether to skip assertions of offsets and values. Defaults to
+ *  {@link ByteBuffer.DEFAULT_NOASSERT}.
+ * @returns {!ByteBuffer}
+ * @expose
+ */
+ByteBuffer.allocate = function(capacity, littleEndian, noAssert) {
+    return new ByteBuffer(capacity, littleEndian, noAssert);
+};
+

package/claw/node_modules/bytebuffer/src/methods/static/concat.js

@@ -0,0 +1,55 @@
+/**
+ * Concatenates multiple ByteBuffers into one.
+//? if (NODE) {
+ * @param {!Array.<!ByteBuffer|!Buffer|!ArrayBuffer|!Uint8Array|string>} buffers Buffers to concatenate
+//? } else {
+ * @param {!Array.<!ByteBuffer|!ArrayBuffer|!Uint8Array|string>} buffers Buffers to concatenate
+//? }
+ * @param {(string|boolean)=} encoding String encoding if `buffers` contains a string ("base64", "hex", "binary",
+ *  defaults to "utf8")
+ * @param {boolean=} littleEndian Whether to use little or big endian byte order for the resulting ByteBuffer. Defaults
+ *  to {@link ByteBuffer.DEFAULT_ENDIAN}.
+ * @param {boolean=} noAssert Whether to skip assertions of offsets and values for the resulting ByteBuffer. Defaults to
+ *  {@link ByteBuffer.DEFAULT_NOASSERT}.
+ * @returns {!ByteBuffer} Concatenated ByteBuffer
+ * @expose
+ */
+ByteBuffer.concat = function(buffers, encoding, littleEndian, noAssert) {
+    if (typeof encoding === 'boolean' || typeof encoding !== 'string') {
+        noAssert = littleEndian;
+        littleEndian = encoding;
+        encoding = undefined;
+    }
+    var capacity = 0;
+    for (var i=0, k=buffers.length, length; i<k; ++i) {
+        if (!ByteBuffer.isByteBuffer(buffers[i]))
+            buffers[i] = ByteBuffer.wrap(buffers[i], encoding);
+        length = buffers[i].limit - buffers[i].offset;
+        if (length > 0) capacity += length;
+    }
+    if (capacity === 0)
+        return new ByteBuffer(0, littleEndian, noAssert);
+    var bb = new ByteBuffer(capacity, littleEndian, noAssert),
+        bi;
+    //? if (!NODE && DATAVIEW)
+    var view = new Uint8Array(bb.buffer);
+    i=0; while (i<k) {
+        bi = buffers[i++];
+        length = bi.limit - bi.offset;
+        if (length <= 0) continue;
+        //? if (NODE) {
+        bi.buffer.copy(bb.buffer, bb.offset, bi.offset, bi.limit);
+        bb.offset += length;
+        //? } else {
+        //? if (DATAVIEW)
+        view.set(new Uint8Array(bi.buffer).subarray(bi.offset, bi.limit), bb.offset);
+        //? else
+        bb.view.set(bi.view.subarray(bi.offset, bi.limit), bb.offset);
+        bb.offset += length;
+        //? }
+    }
+    bb.limit = bb.offset;
+    bb.offset = 0;
+    return bb;
+};
+

package/claw/node_modules/bytebuffer/src/methods/static/isByteBuffer.js

@@ -0,0 +1,9 @@
+/**
+ * Tests if the specified type is a ByteBuffer.
+ * @param {*} bb ByteBuffer to test
+ * @returns {boolean} `true` if it is a ByteBuffer, otherwise `false`
+ * @expose
+ */
+ByteBuffer.isByteBuffer = function(bb) {
+    return (bb && bb["__isByteBuffer__"]) === true;
+};

package/claw/node_modules/bytebuffer/src/methods/static/type.js

@@ -0,0 +1,11 @@
+/**
+ * Gets the backing buffer type.
+ * @returns {Function} `Buffer` under node.js, `ArrayBuffer` in the browser (classes)
+ * @expose
+ */
+ByteBuffer.type = function() {
+    //? if (NODE)
+    return Buffer;
+    //? else
+    return ArrayBuffer;
+};

package/claw/node_modules/bytebuffer/src/methods/static/wrap.js

@@ -0,0 +1,125 @@
+/**
+ * Wraps a buffer or a string. Sets the allocated ByteBuffer's {@link ByteBuffer#offset} to `0` and its
+ *  {@link ByteBuffer#limit} to the length of the wrapped data.
+//? if (NODE) {
+ * @param {!ByteBuffer|!Buffer|!ArrayBuffer|!Uint8Array|string|!Array.<number>} buffer Anything that can be wrapped
+//? } else {
+ * @param {!ByteBuffer|!ArrayBuffer|!Uint8Array|string|!Array.<number>} buffer Anything that can be wrapped
+//? }
+ * @param {(string|boolean)=} encoding String encoding if `buffer` is a string ("base64", "hex", "binary", defaults to
+ *  "utf8")
+ * @param {boolean=} littleEndian Whether to use little or big endian byte order. Defaults to
+ *  {@link ByteBuffer.DEFAULT_ENDIAN}.
+ * @param {boolean=} noAssert Whether to skip assertions of offsets and values. Defaults to
+ *  {@link ByteBuffer.DEFAULT_NOASSERT}.
+ * @returns {!ByteBuffer} A ByteBuffer wrapping `buffer`
+ * @expose
+ */
+ByteBuffer.wrap = function(buffer, encoding, littleEndian, noAssert) {
+    if (typeof encoding !== 'string') {
+        noAssert = littleEndian;
+        littleEndian = encoding;
+        encoding = undefined;
+    }
+    if (typeof buffer === 'string') {
+        if (typeof encoding === 'undefined')
+            encoding = "utf8";
+        switch (encoding) {
+            //? if (BASE64) {
+            case "base64":
+                return ByteBuffer.fromBase64(buffer, littleEndian);
+            //? } if (HEX) {
+            case "hex":
+                return ByteBuffer.fromHex(buffer, littleEndian);
+            //? } if (BINARY) {
+            case "binary":
+                return ByteBuffer.fromBinary(buffer, littleEndian);
+            //? } if (UTF8) {
+            case "utf8":
+                return ByteBuffer.fromUTF8(buffer, littleEndian);
+            //? } if (DEBUG) {
+            case "debug":
+                return ByteBuffer.fromDebug(buffer, littleEndian);
+            //? }
+            default:
+                throw Error("Unsupported encoding: "+encoding);
+        }
+    }
+    if (buffer === null || typeof buffer !== 'object')
+        throw TypeError("Illegal buffer");
+    var bb;
+    if (ByteBuffer.isByteBuffer(buffer)) {
+        bb = ByteBufferPrototype.clone.call(buffer);
+        bb.markedOffset = -1;
+        return bb;
+    }
+    //? if (NODE) {
+    var i = 0,
+        k = 0,
+        b;
+    if (buffer instanceof Uint8Array) { // Extract bytes from Uint8Array
+        b = new Buffer(buffer.length);
+        if (memcpy) { // Fast
+            memcpy(b, 0, buffer.buffer, buffer.byteOffset, buffer.byteOffset + buffer.length);
+        } else { // Slow
+            for (i=0, k=buffer.length; i<k; ++i)
+                b[i] = buffer[i];
+        }
+        buffer = b;
+    } else if (buffer instanceof ArrayBuffer) { // Convert ArrayBuffer to Buffer
+        b = new Buffer(buffer.byteLength);
+        if (memcpy) { // Fast
+            memcpy(b, 0, buffer, 0, buffer.byteLength);
+        } else { // Slow
+            buffer = new Uint8Array(buffer);
+            for (i=0, k=buffer.length; i<k; ++i) {
+                b[i] = buffer[i];
+            }
+        }
+        buffer = b;
+    } else if (!(buffer instanceof Buffer)) { // Create from octets if it is an error, otherwise fail
+        if (Object.prototype.toString.call(buffer) !== "[object Array]")
+            throw TypeError("Illegal buffer");
+        buffer = new Buffer(buffer);
+    }
+    bb = new ByteBuffer(0, littleEndian, noAssert);
+    if (buffer.length > 0) { // Avoid references to more than one EMPTY_BUFFER
+        bb.buffer = buffer;
+        bb.limit = buffer.length;
+    }
+    //? } else {
+    if (buffer instanceof Uint8Array) { // Extract ArrayBuffer from Uint8Array
+        bb = new ByteBuffer(0, littleEndian, noAssert);
+        if (buffer.length > 0) { // Avoid references to more than one EMPTY_BUFFER
+            bb.buffer = buffer.buffer;
+            bb.offset = buffer.byteOffset;
+            bb.limit = buffer.byteOffset + buffer.byteLength;
+            //? if (DATAVIEW)
+            bb.view = new DataView(buffer.buffer);
+            //? else
+            bb.view = new Uint8Array(buffer.buffer);
+        }
+    } else if (buffer instanceof ArrayBuffer) { // Reuse ArrayBuffer
+        bb = new ByteBuffer(0, littleEndian, noAssert);
+        if (buffer.byteLength > 0) {
+            bb.buffer = buffer;
+            bb.offset = 0;
+            bb.limit = buffer.byteLength;
+            //? if (DATAVIEW)
+            bb.view = buffer.byteLength > 0 ? new DataView(buffer) : null;
+            //? else
+            bb.view = buffer.byteLength > 0 ? new Uint8Array(buffer) : null;
+        }
+    } else if (Object.prototype.toString.call(buffer) === "[object Array]") { // Create from octets
+        bb = new ByteBuffer(buffer.length, littleEndian, noAssert);
+        bb.limit = buffer.length;
+        for (var i=0; i<buffer.length; ++i)
+            //? if (DATAVIEW)
+            bb.view.setUint8(i, buffer[i]);
+            //? else
+            bb.view[i] = buffer[i];
+    } else
+        throw TypeError("Illegal buffer"); // Otherwise fail
+    //? }
+    return bb;
+};

package/claw/node_modules/bytebuffer/src/methods/toBuffer.js

@@ -0,0 +1,77 @@
+/**
+ * Returns a copy of the backing buffer that contains this ByteBuffer's contents. Contents are the bytes between
+ *  {@link ByteBuffer#offset} and {@link ByteBuffer#limit}.
+ * @param {boolean=} forceCopy If `true` returns a copy, otherwise returns a view referencing the same memory if
+ *  possible. Defaults to `false`
+//? if (NODE) {
+ * @returns {!Buffer} Contents as a Buffer
+//? } else {
+ * @returns {!ArrayBuffer} Contents as an ArrayBuffer
+//? }
+ * @expose
+ */
+ByteBufferPrototype.toBuffer = function(forceCopy) {
+    var offset = this.offset,
+        limit = this.limit;
+    if (!this.noAssert) {
+        //? ASSERT_RANGE('offset', 'limit');
+    }
+    //? if (NODE) {
+    if (forceCopy) {
+        var buffer = new Buffer(limit - offset);
+        this.buffer.copy(buffer, 0, offset, limit);
+        return buffer;
+    } else {
+        if (offset === 0 && limit === this.buffer.length)
+            return this.buffer;
+        else
+            return this.buffer.slice(offset, limit);
+    }
+    //? } else {
+    // NOTE: It's not possible to have another ArrayBuffer reference the same memory as the backing buffer. This is
+    // possible with Uint8Array#subarray only, but we have to return an ArrayBuffer by contract. So:
+    if (!forceCopy && offset === 0 && limit === this.buffer.byteLength)
+        return this.buffer;
+    if (offset === limit)
+        return EMPTY_BUFFER;
+    var buffer = new ArrayBuffer(limit - offset);
+    new Uint8Array(buffer).set(new Uint8Array(this.buffer).subarray(offset, limit), 0);
+    return buffer;
+    //? }
+};
+
+//? if (NODE) {
+/**
+ * Returns a copy of the backing buffer compacted to contain this ByteBuffer's contents. Contents are the bytes between
+ *  {@link ByteBuffer#offset} and {@link ByteBuffer#limit}.
+ * @returns {!ArrayBuffer} Contents as an ArrayBuffer
+ */
+ByteBufferPrototype.toArrayBuffer = function() {
+    var offset = this.offset,
+        limit = this.limit;
+    if (!this.noAssert) {
+        //? ASSERT_RANGE('offset', 'limit');
+    }
+    var ab = new ArrayBuffer(limit - offset);
+    if (memcpy) { // Fast
+        memcpy(ab, 0, this.buffer, offset, limit);
+    } else { // Slow
+        var dst = new Uint8Array(ab);
+        for (var i=offset; i<limit; ++i)
+            dst[i-offset] = this.buffer[i];
+    }
+    return ab;
+};
+//? } else {
+/**
+ * Returns a raw buffer compacted to contain this ByteBuffer's contents. Contents are the bytes between
+ *  {@link ByteBuffer#offset} and {@link ByteBuffer#limit}. This is an alias of {@link ByteBuffer#toBuffer}.
+ * @function
+ * @param {boolean=} forceCopy If `true` returns a copy, otherwise returns a view referencing the same memory.
+ *  Defaults to `false`
+ * @returns {!ArrayBuffer} Contents as an ArrayBuffer
+ * @expose
+ */
+ByteBufferPrototype.toArrayBuffer = ByteBufferPrototype.toBuffer;
+//? }
+