designix 0.5.11 → 0.5.12

package/src/heliostat/rake.ts

@@ -1,486 +0,0 @@
-// rake.ts
-
-import type {
-	tContour,
-	tParamDef,
-	tParamVal,
-	tGeom,
-	tExtrude,
-	tPageDef
-	//tSubInst
-	//tSubDesign
-} from 'geometrix';
-import {
-	contour,
-	contourCircle,
-	figure,
-	//degToRad,
-	radToDeg,
-	ffix,
-	pNumber,
-	//pCheckbox,
-	//pDropdown,
-	initGeom,
-	EExtrude,
-	EBVolume
-} from 'geometrix';
-
-const pDef: tParamDef = {
-	partName: 'rake',
-	params: [
-		//pNumber(name, unit, init, min, max, step)
-		pNumber('D1', 'mm', 600, 100, 4000, 10),
-		pNumber('D2', 'mm', 400, 100, 4000, 10),
-		pNumber('D3', 'mm', 400, 100, 4000, 10),
-		pNumber('H1', 'mm', 800, 100, 4000, 10),
-		pNumber('H2', 'mm', 3000, 100, 6000, 10),
-		pNumber('H3', 'mm', 400, 0, 4000, 10),
-		pNumber('E1', 'mm', 20, 1, 80, 1),
-		pNumber('E3', 'mm', 30, 1, 80, 1),
-		pNumber('H4', 'mm', 400, 100, 1000, 10),
-		pNumber('D4', 'mm', 300, 100, 1000, 10),
-		pNumber('E4', 'mm', 20, 1, 80, 1),
-		pNumber('H5', 'mm', 1000, 100, 2000, 10),
-		pNumber('D5', 'mm', 200, 10, 1000, 10),
-		pNumber('L4', 'mm', 300, 10, 1000, 10),
-		pNumber('L5', 'mm', 2000, 100, 4000, 10),
-		pNumber('L6', 'mm', 2000, 100, 4000, 10),
-		pNumber('D6', 'mm', 100, 10, 600, 10),
-		pNumber('E6', 'mm', 10, 1, 80, 1),
-		pNumber('L7', 'mm', 100, 10, 1000, 1),
-		pNumber('L8', 'mm', 200, 10, 1000, 1),
-		pNumber('N1', '', 24, 3, 100, 1),
-		pNumber('D7', 'mm', 40, 1, 100, 1),
-		pNumber('L1', 'mm', 30, 1, 300, 1),
-		pNumber('D8', 'mm', 400, 100, 1000, 10),
-		pNumber('H6', 'mm', 100, 50, 1000, 10),
-		pNumber('H7', 'mm', 600, 100, 2000, 10),
-		pNumber('L9', 'mm', 300, 100, 1000, 10),
-		pNumber('R9', 'mm', 50, 0, 300, 1)
-	],
-	paramSvg: {
-		D1: 'rake_face.svg',
-		D2: 'rake_face.svg',
-		D3: 'rake_face.svg',
-		H1: 'rake_face.svg',
-		H2: 'rake_face.svg',
-		H3: 'rake_face.svg',
-		E1: 'rake_face.svg',
-		E3: 'rake_face.svg',
-		H4: 'rake_side.svg',
-		D4: 'rake_side.svg',
-		E4: 'rake_side.svg',
-		H5: 'rake_side.svg',
-		D5: 'rake_side.svg',
-		L4: 'rake_face.svg',
-		L5: 'rake_face.svg',
-		L6: 'rake_face.svg',
-		D6: 'rake_face.svg',
-		E6: 'rake_face.svg',
-		L7: 'rake_face.svg',
-		L8: 'rake_face.svg',
-		N1: 'rake_top.svg',
-		D7: 'rake_top.svg',
-		L1: 'rake_top.svg',
-		D8: 'rake_side.svg',
-		H6: 'rake_door.svg',
-		H7: 'rake_door.svg',
-		L9: 'rake_door.svg',
-		R9: 'rake_door.svg'
-	},
-	sim: {
-		tMax: 180,
-		tStep: 0.5,
-		tUpdate: 500 // every 0.5 second
-	}
-};
-
-type tCtr1 = (orient: number) => tContour;
-type tCtr2 = (width: number, height: number, xpos: number, ypos: number, angle: number) => tContour;
-
-function pGeom(t: number, param: tParamVal): tGeom {
-	let ctrCone: tCtr1;
-	let ctrConePlus: tCtr1;
-	let ctrRect: tCtr2;
-	const rGeome = initGeom(pDef.partName);
-	const figCone = figure();
-	const figBeam = figure();
-	const figBeamHollow = figure();
-	const figDisc = figure();
-	const figHand = figure();
-	const figWing = figure();
-	const figWingHollow = figure();
-	const figDoor = figure();
-	rGeome.logstr += `${rGeome.partName} simTime: ${t}\n`;
-	try {
-		const R1 = param.D1 / 2;
-		const R2 = param.D2 / 2;
-		const R3 = param.D3 / 2;
-		const R4 = param.D4 / 2;
-		const R5 = param.D5 / 2;
-		const R6 = param.D6 / 2;
-		const R7 = param.D7 / 2;
-		const R8 = param.D8 / 2;
-		const H1H2 = param.H1 + param.H2;
-		const H1H5 = H1H2 - param.H4 + param.H5;
-		rGeome.logstr += `cone-height: ${ffix(H1H2)} mm\n`;
-		rGeome.logstr += `cone-height total: ${ffix(H1H5)} mm\n`;
-		if (param.D2 > param.D1) {
-			throw `err110: D2 ${param.D2} is larger than D1 ${param.D1}`;
-		}
-		if (param.D3 + param.E1 > param.D1) {
-			throw `err113: D3 ${param.D3} is too large compare to D1 ${param.D1} and E1 ${param.E1}`;
-		}
-		if (param.H3 + param.E3 > param.H1) {
-			throw `err116: H3 ${param.H3} is too large compare to H1 ${param.H1} and E3 ${param.E3}`;
-		}
-		if (param.H4 + R4 > param.H2) {
-			throw `err119: H4 ${param.H4} is too large compare to H2 ${param.H2} and D4 ${param.D4}`;
-		}
-		if (param.E4 > R4) {
-			throw `err122: E4 ${param.E4} is too large compare to D4 ${param.D4}`;
-		}
-		if (param.D8 <= param.D5) {
-			throw `err146: D8 ${param.D8} is too small compare to D5 ${param.D5}`;
-		}
-		const beamL = 4 * param.L4 + param.L5 + 2 * param.L6;
-		const beamH = param.H1 + param.H2 - param.H4;
-		const handLowX = R4 * Math.cos(Math.PI / 6);
-		const handLowY = R4 * Math.sin(Math.PI / 6);
-		const handHighXint = R5 * Math.cos(Math.PI / 6);
-		const handHighYint = R5 * Math.sin(Math.PI / 6);
-		const handHighXext = R8 * Math.cos(Math.PI / 6);
-		const handHighYext = R8 * Math.sin(Math.PI / 6);
-		const handPos = [-beamL / 2, -param.L5 / 2 - param.L4, param.L5 / 2, beamL / 2 - param.L4];
-		const wingLy = param.H2 - param.L8 - param.H4 - R4;
-		if (wingLy < 0) {
-			throw `err140: H2 ${param.H2} too small compare to L8 ${param.L8}, H4 ${param.H4} and D4 ${param.D4}`;
-		}
-		const coneAngle = Math.atan2(R1 - R2, param.H2);
-		rGeome.logstr += `cone-angle: ${ffix(radToDeg(coneAngle))} degree\n`;
-		const wingLx = beamL / 2 - param.L7 - R1 + param.L8 * Math.tan(coneAngle);
-		const wingL = Math.sqrt(wingLx ** 2 + wingLy ** 2);
-		const wingAngle = Math.atan2(wingLx, wingLy);
-		rGeome.logstr += `wing-angle: ${ffix(radToDeg(wingAngle))} degree\n`;
-		const wingLPre = param.E1 / Math.sin(wingAngle + coneAngle);
-		const wingL2 = wingL + param.E4 / Math.cos(wingAngle) + wingLPre;
-		const wingPosX = R1 - param.L8 * Math.tan(coneAngle) - wingLPre * Math.sin(wingAngle);
-		const wingPosY = param.H1 + param.L8 - wingLPre * Math.cos(wingAngle);
-		const wingCPosX = wingPosX - R6 * Math.cos(wingAngle);
-		const wingCPosY = wingPosY + R6 * Math.sin(wingAngle);
-		const wingHR = R6 - param.E6;
-		const wingHPosX = wingPosX - param.E6 * Math.cos(wingAngle);
-		const wingHPosY = wingPosY + param.E6 * Math.sin(wingAngle);
-		const wingAngleC = Math.PI / 2 - wingAngle;
-		const doorLowX = param.L9 / 2;
-		const doorHighX = doorLowX - param.H7 * Math.tan(coneAngle);
-		if (doorHighX < param.R9) {
-			throw `err177: R9 ${param.R9} too large compare to coneAngle and L9 ${param.L9}`;
-		}
-		if (param.L9 > param.D1) {
-			throw `err180: L9 ${param.L9} too large compare to D1 ${param.D1}`;
-		}
-		// figCone
-		const coneSlopeX = param.E1 * Math.cos(coneAngle);
-		const coneSlopeY = param.E1 * Math.sin(coneAngle);
-		const coneFC = param.E1 * Math.tan(coneAngle / 2);
-		ctrCone = function (orient: number): tContour {
-			const rCtr = contour(orient * R1, 0)
-				.addSegStrokeA(orient * R1, param.H1)
-				.addSegStrokeA(orient * R2, H1H2)
-				.addSegStrokeA(orient * (R2 - coneSlopeX), H1H2 - coneSlopeY)
-				.addSegStrokeA(orient * (R1 - param.E1), param.H1 - coneFC)
-				.addSegStrokeA(orient * (R1 - param.E1), 0)
-				.closeSegStroke();
-			return rCtr;
-		};
-		ctrConePlus = function (orient: number): tContour {
-			const rCtr = contour(orient * R1, 0)
-				.addSegStrokeA(orient * R1, param.H1)
-				.addSegStrokeA(orient * R2, H1H2)
-				.addSegStrokeA(orient * (R2 - coneSlopeX), H1H2 - coneSlopeY)
-				.addSegStrokeA(orient * (R1 - param.E1), param.H1 - coneFC)
-				.addSegStrokeA(orient * (R1 - param.E1), param.H1 - param.H3)
-				.addSegStrokeA(orient * R3, param.H1 - param.H3)
-				.addSegStrokeA(orient * R3, param.H1 - param.H3 - param.E3)
-				.addSegStrokeA(orient * (R1 - param.E1), param.H1 - param.H3 - param.E3)
-				.addSegStrokeA(orient * (R1 - param.E1), 0)
-				.closeSegStroke();
-			return rCtr;
-		};
-		ctrRect = function (
-			width: number,
-			height: number,
-			xpos: number,
-			ypos: number,
-			angle: number
-		): tContour {
-			const xWidth = width * Math.cos(angle);
-			const yWidth = width * Math.sin(angle);
-			const xHeight = -height * Math.sin(angle);
-			const yHeight = height * Math.cos(angle);
-			const rCtr = contour(xpos, ypos)
-				.addSegStrokeA(xpos + xWidth, ypos + yWidth)
-				.addSegStrokeA(xpos + xWidth + xHeight, ypos + yWidth + yHeight)
-				.addSegStrokeA(xpos + xHeight, ypos + yHeight)
-				.closeSegStroke();
-			return rCtr;
-		};
-		const ctrDoor = contour(doorLowX, param.H1 + param.H6)
-			.addCornerRounded(param.R9)
-			.addSegStrokeA(doorHighX, param.H1 + param.H6 + param.H7)
-			.addCornerRounded(param.R9)
-			.addSegStrokeA(-doorHighX, param.H1 + param.H6 + param.H7)
-			.addCornerRounded(param.R9)
-			.addSegStrokeA(-doorLowX, param.H1 + param.H6)
-			.addCornerRounded(param.R9)
-			.closeSegStroke();
-		figCone.addMain(ctrCone(1));
-		figCone.addSecond(ctrConePlus(1));
-		figCone.addSecond(ctrConePlus(-1));
-		//figCone.addSecond(contourCircle(0, beamH, R4));
-		//figCone.addSecond(contourCircle(0, beamH, R4 - param.E4));
-		figCone.addSecond(ctrRect(beamL, param.D4, -beamL / 2, beamH - R4, 0)); // beam-ext
-		figCone.addSecond(
-			ctrRect(beamL, param.D4 - 2 * param.E4, -beamL / 2, beamH - R4 + param.E4, 0)
-		); // beam-int
-		for (const posX of handPos) {
-			figCone.addSecond(
-				ctrRect(param.L4, param.H5 - handLowY - handHighYint, posX, beamH + handLowY, 0)
-			);
-		}
-		figCone.addSecond(ctrRect(wingL2, 2 * R6, wingPosX, wingPosY, wingAngleC)); // wing-right
-		figCone.addSecond(ctrRect(wingL2, 2 * wingHR, wingHPosX, wingHPosY, wingAngleC));
-		figCone.addSecond(ctrRect(2 * R6, wingL2, -wingPosX, wingPosY, wingAngle)); // wing-left
-		figCone.addSecond(ctrRect(2 * wingHR, wingL2, -wingHPosX, wingHPosY, wingAngle));
-		figCone.addSecond(ctrDoor);
-		// figBeam
-		const ctrHand = contour(handLowX, beamH + handLowY)
-			.addSegStrokeA(handHighXext, beamH + param.H5 - handHighYext)
-			.addSegStrokeA(handHighXint, beamH + param.H5 - handHighYint)
-			.addPointA(-handHighXint, beamH + param.H5 - handHighYint)
-			.addSegArc(R5, false, false)
-			.addSegStrokeA(-handHighXext, beamH + param.H5 - handHighYext)
-			.addSegStrokeA(-handLowX, beamH + handLowY)
-			.closeSegArc(R4, false, false);
-		figBeam.addMain(contourCircle(0, beamH, R4));
-		figBeam.addMain(contourCircle(0, beamH, R4 - param.E4));
-		figBeam.addSecond(ctrConePlus(1));
-		figBeam.addSecond(ctrConePlus(-1));
-		figBeam.addSecond(ctrHand);
-		figBeam.addSecond(contourCircle(0, beamH + param.H5, R5));
-		figBeam.addSecond(ctrRect(2 * R6, wingLy, -R6, param.H1 + param.L8, 0)); // wing
-		figBeam.addSecond(ctrRect(2 * wingHR, wingLy, -wingHR, param.H1 + param.L8, 0));
-		figBeam.addSecond(ctrDoor);
-		// figBeamHollow
-		figBeamHollow.addMain(contourCircle(0, beamH, R4 - param.E4));
-		figBeamHollow.addSecond(contourCircle(0, beamH, R4));
-		figBeamHollow.addSecond(ctrHand);
-		// figDisc
-		figDisc.addMain(contourCircle(0, 0, R1));
-		figDisc.addMain(contourCircle(0, 0, R3));
-		const posR = R3 + param.L1;
-		const posA = (2 * Math.PI) / param.N1;
-		for (let i = 0; i < param.N1; i++) {
-			const posX = posR * Math.cos(i * posA);
-			const posY = posR * Math.sin(i * posA);
-			figDisc.addMain(contourCircle(posX, posY, R7));
-		}
-		figDisc.addSecond(contourCircle(0, 0, R1 - param.E1));
-		figDisc.addSecond(contourCircle(0, 0, R2));
-		figDisc.addSecond(ctrRect(param.D4, beamL, -R4, -beamL / 2, 0)); // beam-ext
-		figDisc.addSecond(ctrRect(param.D4 - 2 * param.E4, beamL, -R4 + param.E4, -beamL / 2, 0)); // beam-int
-		for (const posX of handPos) {
-			figDisc.addSecond(ctrRect(2 * handLowX, param.L4, -handLowX, posX, 0));
-			figDisc.addSecond(ctrRect(2 * handHighXint, param.L4, -handHighXint, posX, 0));
-			figDisc.addSecond(ctrRect(2 * handHighXext, param.L4, -handHighXext, posX, 0));
-		}
-		figDisc.addSecond(ctrRect(2 * R6, wingLx, -R6, R1 - param.L8 * Math.tan(coneAngle), 0)); // wing-right
-		figDisc.addSecond(
-			ctrRect(2 * wingHR, wingLx, -wingHR, R1 - param.L8 * Math.tan(coneAngle), 0)
-		);
-		figDisc.addSecond(
-			ctrRect(2 * R6, wingLx, -R6, -R1 + param.L8 * Math.tan(coneAngle) - wingLx, 0)
-		); // wing-left
-		figDisc.addSecond(
-			ctrRect(2 * wingHR, wingLx, -wingHR, -R1 + param.L8 * Math.tan(coneAngle) - wingLx, 0)
-		);
-		// figHand
-		figHand.addMain(ctrHand);
-		figHand.addSecond(contourCircle(0, beamH, R4));
-		figHand.addSecond(contourCircle(0, beamH, R4 - param.E4));
-		figHand.addSecond(contourCircle(0, beamH + param.H5, R5));
-		// figWing
-		figWing.addMain(contourCircle(0, 0, R6));
-		figWing.addMain(contourCircle(0, 0, wingHR));
-		// figWingHollow
-		figWingHollow.addSecond(contourCircle(0, 0, R6));
-		figWingHollow.addMain(contourCircle(0, 0, wingHR));
-		// figDoor
-		figDoor.addMain(ctrDoor);
-		figDoor.addSecond(ctrConePlus(1));
-		figDoor.addSecond(ctrConePlus(-1));
-		figDoor.addSecond(ctrRect(beamL, param.D4, -beamL / 2, beamH - R4, 0)); // beam-ext
-		figDoor.addSecond(
-			ctrRect(beamL, param.D4 - 2 * param.E4, -beamL / 2, beamH - R4 + param.E4, 0)
-		); // beam-int
-		for (const posX of handPos) {
-			figDoor.addSecond(
-				ctrRect(param.L4, param.H5 - handLowY - handHighYint, posX, beamH + handLowY, 0)
-			);
-		}
-		figDoor.addSecond(ctrRect(wingL2, 2 * R6, wingPosX, wingPosY, wingAngleC)); // wing-right
-		figDoor.addSecond(ctrRect(wingL2, 2 * wingHR, wingHPosX, wingHPosY, wingAngleC));
-		figDoor.addSecond(ctrRect(2 * R6, wingL2, -wingPosX, wingPosY, wingAngle)); // wing-left
-		figDoor.addSecond(ctrRect(2 * wingHR, wingL2, -wingHPosX, wingHPosY, wingAngle));
-		// final figure list
-		rGeome.fig = {
-			faceCone: figCone,
-			faceBeam: figBeam,
-			faceBeamHollow: figBeamHollow,
-			faceDisc: figDisc,
-			faceHand: figHand,
-			faceWing: figWing,
-			faceWingHollow: figWingHollow,
-			faceDoor: figDoor
-		};
-		const designName = rGeome.partName;
-		const preExtrude = handPos.map((posX, idx) => {
-			const rHand: tExtrude = {
-				outName: `subpax_${designName}_hand_${idx}`,
-				face: `${designName}_faceHand`,
-				extrudeMethod: EExtrude.eLinearOrtho,
-				length: param.L4,
-				rotate: [Math.PI / 2, 0, 0],
-				translate: [0, -posX, 0]
-			};
-			return rHand;
-		});
-		rGeome.vol = {
-			extrudes: [
-				{
-					outName: `subpax_${designName}_cone`,
-					face: `${designName}_faceCone`,
-					extrudeMethod: EExtrude.eRotate,
-					rotate: [0, 0, 0],
-					translate: [0, 0, 0]
-				},
-				{
-					outName: `subpax_${designName}_beam`,
-					face: `${designName}_faceBeam`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: beamL,
-					rotate: [Math.PI / 2, 0, 0],
-					translate: [0, beamL / 2, 0]
-				},
-				{
-					outName: `subpax_${designName}_beamHollow`,
-					face: `${designName}_faceBeamHollow`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: beamL,
-					rotate: [Math.PI / 2, 0, 0],
-					translate: [0, beamL / 2, 0]
-				},
-				{
-					outName: `subpax_${designName}_disc`,
-					face: `${designName}_faceDisc`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: param.E3,
-					rotate: [0, 0, 0],
-					translate: [0, 0, param.H1 - param.H3 - param.E3]
-				},
-				{
-					outName: `subpax_${designName}_wing_right`,
-					face: `${designName}_faceWing`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: wingL2,
-					rotate: [-wingAngle, 0, 0],
-					translate: [0, wingCPosX, wingCPosY]
-				},
-				{
-					outName: `subpax_${designName}_wing_left`,
-					face: `${designName}_faceWing`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: wingL2,
-					rotate: [wingAngle, 0, 0],
-					translate: [0, -wingCPosX, wingCPosY]
-				},
-				{
-					outName: `subpax_${designName}_wing_hollow_right`,
-					face: `${designName}_faceWingHollow`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: wingL2,
-					rotate: [-wingAngle, 0, 0],
-					translate: [0, wingCPosX, wingCPosY]
-				},
-				{
-					outName: `subpax_${designName}_wing_hollow_left`,
-					face: `${designName}_faceWingHollow`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: wingL2,
-					rotate: [wingAngle, 0, 0],
-					translate: [0, -wingCPosX, wingCPosY]
-				},
-				{
-					outName: `subpax_${designName}_door`,
-					face: `${designName}_faceDoor`,
-					extrudeMethod: EExtrude.eLinearOrtho,
-					length: param.D1,
-					rotate: [Math.PI / 2, 0, Math.PI / 2],
-					translate: [0, 0, 0]
-				},
-				...preExtrude
-			],
-			volumes: [
-				{
-					outName: `ipax_${designName}_plus`,
-					boolMethod: EBVolume.eUnion,
-					inList: [
-						`subpax_${designName}_cone`,
-						`subpax_${designName}_beam`,
-						`subpax_${designName}_disc`,
-						`subpax_${designName}_hand_0`,
-						`subpax_${designName}_hand_1`,
-						`subpax_${designName}_hand_2`,
-						`subpax_${designName}_hand_3`,
-						`subpax_${designName}_wing_right`,
-						`subpax_${designName}_wing_left`
-					]
-				},
-				{
-					outName: `ipax_${designName}_hollow`,
-					boolMethod: EBVolume.eUnion,
-					inList: [
-						`subpax_${designName}_beamHollow`,
-						`subpax_${designName}_wing_hollow_right`,
-						`subpax_${designName}_wing_hollow_left`,
-						`subpax_${designName}_door`
-					]
-				},
-				{
-					outName: `pax_${designName}`,
-					boolMethod: EBVolume.eSubstraction,
-					inList: [`ipax_${designName}_plus`, `ipax_${designName}_hollow`]
-				}
-			]
-		};
-		// sub-design
-		rGeome.sub = {};
-		// finalize
-		rGeome.logstr += 'heliostat-rake draw successfully!\n';
-		rGeome.calcErr = false;
-	} catch (emsg) {
-		rGeome.logstr += emsg as string;
-		console.log(emsg as string);
-	}
-	return rGeome;
-}
-
-const rakeDef: tPageDef = {
-	pTitle: 'Heliostat rake',
-	pDescription: 'The rake on top of the pole-rotor of the heliostat',
-	pDef: pDef,
-	pGeom: pGeom
-};
-
-export { rakeDef };