desi76 0.1.6 → 0.1.7

package/dist/index.js

@@ -333,16 +333,18 @@ var voilaDef = {
   pGeom: pGeom2
 };
 
-// src/stone/stairs.ts
+// src/charpente/abri.ts
 import {
   point,
   contour as contour3,
   contourCircle as contourCircle3,
   ctrRectangle as ctrRectangle2,
   figure as figure3,
+  degToRad,
   radToDeg,
   ffix as ffix2,
   pNumber as pNumber3,
+  pCheckbox,
   pDropdown,
   pSectionSeparator as pSectionSeparator3,
   EExtrude as EExtrude3,
@@ -350,22 +352,1419 @@ import {
   initGeom as initGeom3
 } from "geometrix";
 var pDef3 = {
+  partName: "abri",
+  params: [
+    //pNumber(name, unit, init, min, max, step)
+    pNumber3("Nb1", "poleTriangles", 3, 2, 20, 1),
+    //pNumber('Nb2', 'slotTriangles', 0, 0, 20, 1), // not yet implemented
+    pNumber3("Lb", "mm", 3e3, 10, 1e4, 1),
+    pNumber3("La", "mm", 3e3, 10, 1e4, 1),
+    pCheckbox("SecondPoleNorth", false),
+    pNumber3("KaNorth", "mm", 1e3, 10, 1e4, 1),
+    pNumber3("JaNorth", "mm", 1e3, 10, 1e4, 1),
+    pCheckbox("SecondPoleSouth", false),
+    pNumber3("KaSouth", "mm", 1e3, 10, 1e4, 1),
+    pNumber3("JaSouth", "mm", 1e3, 10, 1e4, 1),
+    pSectionSeparator3("West East Sides"),
+    pNumber3("Ra", "degree", 30, 10, 80, 0.5),
+    // 50 + 23.5 = 73.5 that's very steep!
+    pNumber3("Rt", "%", 50, 0, 100, 1),
+    pNumber3("ReS", "mm", 500, 1, 5e3, 1),
+    pNumber3("ReN", "mm", 500, 1, 5e3, 1),
+    pNumber3("H1", "mm", 2500, 10, 5e3, 1),
+    pNumber3("H2", "mm", 300, 10, 1e3, 1),
+    pNumber3("H3", "mm", 300, 10, 1e3, 1),
+    pCheckbox("bSplit", false),
+    pCheckbox("aSplit", false),
+    pNumber3("H3s", "mm", 300, 10, 1e3, 1),
+    pNumber3("H3arc", "mm", 0, 0, 2e3, 1),
+    pSectionSeparator3("plank-1"),
+    pNumber3("W1a", "mm", 300, 10, 1e3, 1),
+    pNumber3("W1b", "mm", 300, 10, 1e3, 1),
+    pNumber3("V1", "mm", 40, 0, 1e3, 1),
+    pNumber3("U1", "mm", 40, 0, 1e3, 1),
+    pNumber3("W2", "mm", 150, 5, 1e3, 1),
+    pNumber3("W3", "mm", 150, 5, 1e3, 1),
+    pNumber3("D2", "mm", 20, 0, 200, 1),
+    pNumber3("D3", "mm", 20, 0, 200, 1),
+    pSectionSeparator3("plank-4 plank-7"),
+    pNumber3("W4", "mm", 200, 1, 1e3, 1),
+    pNumber3("B4", "mm", 100, 0, 1e3, 1),
+    pNumber3("D4", "mm", 20, 0, 200, 1),
+    pNumber3("P41", "mm", 20, 0, 200, 1),
+    pNumber3("P42", "mm", 20, 0, 200, 1),
+    pNumber3("S4", "mm", 60, 0, 200, 1),
+    pNumber3("S4e", "mm", 0, 0, 20, 0.1),
+    pNumber3("S4e2", "mm", 0, 0, 20, 0.1),
+    pNumber3("Q4", "mm", 500, 0, 2e3, 1),
+    pNumber3("Q4Init", "mm", 50, 0, 2e3, 1),
+    pNumber3("dropLastN", "notch", 0, 0, 10, 1),
+    pNumber3("dropLastS", "notch", 0, 0, 10, 1),
+    pNumber3("H7", "mm", 60, 0, 200, 1),
+    pSectionSeparator3("plank-5 plank-8"),
+    pNumber3("W5a", "mm", 200, 1, 1e3, 1),
+    pNumber3("W5bs", "mm", 0, 0, 1e3, 1),
+    pNumber3("D5", "mm", 20, 0, 200, 1),
+    pDropdown("top_opt", ["shifted", "aligned"]),
+    pNumber3("G5Min", "mm", 200, 1, 1e3, 1),
+    pNumber3("P5", "mm", 20, 1, 200, 1),
+    pNumber3("W8", "mm", 200, 1, 1e3, 1),
+    pSectionSeparator3("plank-6"),
+    pNumber3("W6", "mm", 100, 1, 1e3, 1),
+    pNumber3("H6", "mm", 100, 1, 1e3, 1),
+    pDropdown("peak6", ["peak", "square"]),
+    pSectionSeparator3("Diagonals"),
+    pNumber3("dbW", "mm", 100, 1, 500, 1),
+    pNumber3("dbX", "mm", 500, 1, 2e3, 1),
+    pNumber3("dbY", "mm", 1e3, 1, 2e3, 1),
+    pNumber3("dbP", "mm", 50, 1, 200, 1),
+    pNumber3("dbPe", "mm", 0, 0, 20, 0.1),
+    pNumber3("dbD", "mm", 20, 1, 200, 1),
+    pNumber3("dbE", "mm", 50, 1, 500, 1),
+    pNumber3("daW", "mm", 100, 1, 500, 1),
+    pNumber3("daX", "mm", 500, 1, 2e3, 1),
+    pNumber3("daY", "mm", 1e3, 1, 2e3, 1),
+    pNumber3("daP", "mm", 50, 1, 200, 1),
+    pNumber3("daPe", "mm", 0, 0, 20, 0.1),
+    pNumber3("daD", "mm", 20, 1, 200, 1),
+    pNumber3("daE", "mm", 50, 1, 500, 1),
+    pNumber3("dtW", "mm", 100, 1, 500, 1),
+    pNumber3("dtX", "mm", 1e3, 1, 2e3, 1),
+    pNumber3("dtY", "mm", 1e3, 1, 2e3, 1),
+    pNumber3("dtP", "mm", 50, 1, 200, 1),
+    pNumber3("dtPe", "mm", 0, 0, 20, 0.1),
+    pNumber3("dtQ", "mm", 20, 1, 200, 1),
+    pNumber3("dtQe", "mm", 0, 0, 20, 0.1),
+    pNumber3("dtF", "mm", 800, 1, 4e3, 1),
+    pSectionSeparator3("3D Export"),
+    pCheckbox("d3Plank1", false),
+    pDropdown("d3Plank1West", ["Low", "High", "End"]),
+    pDropdown("d3Plank1East", ["Low", "High", "End"]),
+    pDropdown("d3Plank1SN", ["P1", "P2", "P3", "P4"]),
+    pCheckbox("d3Plank2EE", false),
+    pCheckbox("d3Plank2Slot", false),
+    pCheckbox("d3Plank2Short", false),
+    pCheckbox("d3Plank3EE", false),
+    pCheckbox("d3Plank3S", false),
+    pCheckbox("d3Plank3M", false),
+    pCheckbox("d3Plank3N", false),
+    pCheckbox("d3Plank4S", false),
+    pCheckbox("d3Plank4N", false),
+    pCheckbox("d3Plank5", false),
+    pCheckbox("d3Plank6", false),
+    pCheckbox("d3Plank7", false),
+    pCheckbox("d3Plank8S", false),
+    pCheckbox("d3Plank8N", false),
+    pCheckbox("d3PlankDiagTop", false),
+    pCheckbox("d3PlankDiagA", false),
+    pCheckbox("d3PlankDiagB", false),
+    pCheckbox("d3Assembly", true)
+  ],
+  paramSvg: {
+    Nb1: "abri_base.svg",
+    //Nb2: 'abri_base.svg',
+    Lb: "abri_base.svg",
+    La: "abri_base.svg",
+    SecondPoleNorth: "abri_base.svg",
+    KaNorth: "abri_base.svg",
+    SecondPoleSouth: "abri_base.svg",
+    KaSouth: "abri_base.svg",
+    JaNorth: "abri_base.svg",
+    JaSouth: "abri_base.svg",
+    Ra: "abri_triangle.svg",
+    Rt: "abri_triangle.svg",
+    ReS: "abri_triangle.svg",
+    ReN: "abri_plank4.svg",
+    H1: "abri_beam_heights.svg",
+    H2: "abri_beam_heights.svg",
+    H3: "abri_south_bSplit_off.svg",
+    bSplit: "abri_south_bSplit.svg",
+    aSplit: "abri_east_P1234.svg",
+    H3s: "abri_south_P2P3.svg",
+    H3arc: "abri_beam_heights.svg",
+    W1a: "abri_base.svg",
+    W1b: "abri_base.svg",
+    V1: "abri_base.svg",
+    U1: "abri_base.svg",
+    W2: "abri_base.svg",
+    W3: "abri_base.svg",
+    D2: "abri_base.svg",
+    D3: "abri_base.svg",
+    W4: "abri_plank4.svg",
+    B4: "abri_triangle.svg",
+    D4: "abri_plank4.svg",
+    P41: "abri_plank4.svg",
+    P42: "abri_plank4.svg",
+    S4: "abri_plank4.svg",
+    S4e: "abri_notch.svg",
+    S4e2: "abri_plank4.svg",
+    Q4: "abri_plank4.svg",
+    Q4Init: "abri_plank4.svg",
+    dropLastN: "abri_top_opt_shifted.svg",
+    dropLastS: "abri_top_opt_aligned.svg",
+    H7: "abri_triangle.svg",
+    W5a: "abri_triangle.svg",
+    W5bs: "abri_plank5b.svg",
+    D5: "abri_triangle.svg",
+    top_opt: "abri_top_opt_shifted.svg",
+    G5Min: "abri_triangle.svg",
+    P5: "abri_plank8.svg",
+    W8: "abri_triangle.svg",
+    W6: "abri_top_opt_aligned.svg",
+    H6: "abri_triangle.svg",
+    peak6: "abri_triangle.svg",
+    dbW: "abri_diagonal_b.svg",
+    dbX: "abri_diagonal_b.svg",
+    dbY: "abri_diagonal_b.svg",
+    dbP: "abri_diagonal_b.svg",
+    dbPe: "abri_diagonal_b.svg",
+    dbD: "abri_diagonal_b.svg",
+    dbE: "abri_diagonal_b.svg",
+    daW: "abri_diagonal_a.svg",
+    daX: "abri_diagonal_a.svg",
+    daY: "abri_diagonal_a.svg",
+    daP: "abri_diagonal_a.svg",
+    daPe: "abri_diagonal_a.svg",
+    daD: "abri_diagonal_a.svg",
+    daE: "abri_diagonal_a.svg",
+    dtW: "abri_diagonal_top.svg",
+    dtX: "abri_diagonal_top.svg",
+    dtY: "abri_diagonal_top.svg",
+    dtP: "abri_diagonal_top.svg",
+    dtPe: "abri_diagonal_top.svg",
+    dtQ: "abri_diagonal_top.svg",
+    dtQe: "abri_diagonal_top.svg",
+    dtF: "abri_base.svg",
+    d3Plank1: "abri_3d_export.svg",
+    d3Plank1West: "abri_south_P2P3.svg",
+    d3Plank1East: "abri_south_P2P3.svg",
+    d3Plank1SN: "abri_east_P1234.svg",
+    d3Plank2EE: "abri_3d_export.svg",
+    d3Plank2Slot: "abri_3d_export.svg",
+    d3Plank2Short: "abri_3d_export.svg",
+    d3Plank3One: "abri_3d_export.svg",
+    d3Plank3S: "abri_3d_export.svg",
+    d3Plank3M: "abri_3d_export.svg",
+    d3Plank3N: "abri_3d_export.svg",
+    d3Plank4S: "abri_3d_export.svg",
+    d3Plank4N: "abri_3d_export.svg",
+    d3Plank5: "abri_3d_export.svg",
+    d3Plank6: "abri_3d_export.svg",
+    d3Plank7: "abri_3d_export.svg",
+    d3Plank8S: "abri_3d_export.svg",
+    d3Plank8N: "abri_3d_export.svg",
+    d3PlankDiagTop: "abri_3d_export.svg",
+    d3PlankDiagA: "abri_3d_export.svg",
+    d3PlankDiagB: "abri_3d_export.svg",
+    d3Assembly: "abri_3d_export.svg"
+  },
+  sim: {
+    tMax: 180,
+    tStep: 0.5,
+    tUpdate: 500
+    // every 0.5 second
+  }
+};
+function pGeom3(t, param, suffix = "") {
+  const rGeome = initGeom3(pDef3.partName + suffix);
+  const figBase = figure3();
+  const figSouth = figure3();
+  const figEast = figure3();
+  const figPlank1a = figure3();
+  const figPlank1b = figure3();
+  const figPlank2EE = figure3();
+  const figPlank2Slot = figure3();
+  const figPlank2Short = figure3();
+  const figPlank3EE = figure3();
+  const figPlank3S = figure3();
+  const figPlank3M = figure3();
+  const figPlank3N = figure3();
+  const figPlank4S = figure3();
+  const figPlank4N = figure3();
+  const figPlank5a = figure3();
+  const figPlank5b = figure3();
+  const figPlank6b = figure3();
+  const figPlank6c = figure3();
+  const figPlank7c = figure3();
+  const figPlank8S = figure3();
+  const figPlank8N = figure3();
+  const figPlankDiagTop = figure3();
+  const figPlankDiagA = figure3();
+  const figPlankDiagB = figure3();
+  rGeome.logstr += `${rGeome.partName} simTime: ${t}
+`;
+  try {
+    let JaMin2 = function(iRa) {
+      const rMin = H32 + W42 / Math.cos(iRa - pi2) + H32 / Math.tan(iRa);
+      return rMin;
+    }, ctrPlank1a2 = function(ix, iy, iP1234) {
+      const H3sc = (iP1234 === 2 || iP1234 === 3) && param.aSplit === 1 ? param.H3s : 0;
+      const H2s = param.bSplit === 1 ? param.H2 : 0;
+      const H2H3c = H2H3 + H2s;
+      let sideN = iP1234 === 4 ? 2 : 0;
+      let sideS = iP1234 === 1 ? 2 : 0;
+      if (param.aSplit === 1 && iP1234 === 2) {
+        sideN = 1;
+      }
+      if (param.aSplit === 1 && iP1234 === 3) {
+        sideS = 1;
+      }
+      const hh0 = param.H2 + H2s;
+      const hh1 = hh0 + (param.aSplit === 1 ? param.H3 : 0);
+      const h3Lo = param.daY + pldaP1 - pldaPe2 - hh0;
+      const h3Hi = param.daY + pldaP1 - pldaPe2 - hh1;
+      const h2 = pldaP3 + pldaPe;
+      const h1Lo = param.H1 - h2 - h3Lo;
+      const h1Hi = param.H1 - h2 - h3Hi;
+      const rCtr = contour3(ix, iy);
+      if (sideN === 2) {
+        rCtr.addSegStrokeR(param.H1, 0);
+      } else if (sideN === 1) {
+        rCtr.addSegStrokeR(h1Hi, 0).addSegStrokeR(0, param.daP).addSegStrokeR(h2, 0).addSegStrokeR(0, -param.daP).addSegStrokeR(h3Hi, 0);
+      } else {
+        rCtr.addSegStrokeR(h1Lo, 0).addSegStrokeR(0, param.daP).addSegStrokeR(h2, 0).addSegStrokeR(0, -param.daP).addSegStrokeR(h3Lo, 0);
+      }
+      rCtr.addSegStrokeR(0, param.V1).addSegStrokeR(H2H3c + H3sc, 0).addSegStrokeR(0, W1a2V1).addSegStrokeR(-H2H3c - H3sc, 0).addSegStrokeR(0, param.V1);
+      if (sideS === 2) {
+        rCtr.addSegStrokeR(-param.H1, 0);
+      } else if (sideS === 1) {
+        rCtr.addSegStrokeR(-h3Hi, 0).addSegStrokeR(0, -param.daP).addSegStrokeR(-h2, 0).addSegStrokeR(0, param.daP).addSegStrokeR(-h1Hi, 0);
+      } else {
+        rCtr.addSegStrokeR(-h3Lo, 0).addSegStrokeR(0, -param.daP).addSegStrokeR(-h2, 0).addSegStrokeR(0, param.daP).addSegStrokeR(-h1Lo, 0);
+      }
+      rCtr.closeSegStroke();
+      return rCtr;
+    }, ctrPlank1aPlaced2 = function(ix, iy, iP1234) {
+      const rCtr = ctrPlank1a2(ix, iy - param.W1a, iP1234).rotate(ix, iy, pi2);
+      return rCtr;
+    }, ctrPlank1b2 = function(ix, iy, iSideW, iSideE, iP1234) {
+      const H3sc = (iP1234 === 2 || iP1234 === 3) && param.aSplit === 1 ? param.H3s : 0;
+      const H3c2 = param.H3 + H3sc;
+      const H2sc = param.bSplit === 1 ? param.H2 : 0;
+      const H1H2sc = H1H2 + H2sc;
+      const h3Lo = param.dbY + pldbP1 - pldbPe2 + param.H2 + H2sc;
+      const h3Hi = param.dbY + pldbP1 - pldbPe2 + H2sc;
+      const h2 = pldbP3 + pldbPe;
+      const h1Lo = H1H2sc - h2 - h3Lo;
+      const h1Hi = H1H2sc - h2 - h3Hi;
+      const rCtr = contour3(ix, iy);
+      if (iSideE === 2) {
+        rCtr.addSegStrokeR(H1H2sc, 0);
+      } else if (iSideE === 1) {
+        rCtr.addSegStrokeR(h1Hi, 0).addSegStrokeR(0, param.dbP).addSegStrokeR(h2, 0).addSegStrokeR(0, -param.dbP).addSegStrokeR(h3Hi, 0);
+      } else {
+        rCtr.addSegStrokeR(h1Lo, 0).addSegStrokeR(0, param.dbP).addSegStrokeR(h2, 0).addSegStrokeR(0, -param.dbP).addSegStrokeR(h3Lo, 0);
+      }
+      rCtr.addSegStrokeR(0, param.U1).addSegStrokeR(H3c2, 0).addSegStrokeR(0, W1b2U1).addSegStrokeR(-H3c2, 0).addSegStrokeR(0, param.U1);
+      if (iSideW === 2) {
+        rCtr.addSegStrokeR(-H1H2sc, 0);
+      } else if (iSideW === 1) {
+        rCtr.addSegStrokeR(-h3Hi, 0).addSegStrokeR(0, -param.dbP).addSegStrokeR(-h2, 0).addSegStrokeR(0, param.dbP).addSegStrokeR(-h1Hi, 0);
+      } else {
+        rCtr.addSegStrokeR(-h3Lo, 0).addSegStrokeR(0, -param.dbP).addSegStrokeR(-h2, 0).addSegStrokeR(0, param.dbP).addSegStrokeR(-h1Lo, 0);
+      }
+      rCtr.closeSegStroke();
+      return rCtr;
+    }, ctrPlank1bPlaced2 = function(ix, iy, iSideW, iSideE, iP1234) {
+      const rCtr = ctrPlank1b2(ix, iy - param.W1b, iSideW, iSideE, iP1234).rotate(ix, iy, pi2);
+      return rCtr;
+    }, ctrPlank2EE2 = function(ix, iy) {
+      const rCtr = ctrRectangle2(ix, iy, pl2Lb, param.H2);
+      return rCtr;
+    }, ctrPlank2Slot2 = function(ix, iy) {
+      const rCtr = ctrRectangle2(ix, iy, param.Lb + 2 * (param.W1b + W3U1), param.H2);
+      return rCtr;
+    }, ctrPlank2Short2 = function(ix, iy) {
+      const rCtr = ctrRectangle2(ix, iy, param.W1b + 2 * W3U1, param.H2);
+      return rCtr;
+    }, ctrPlank3EE2 = function(ix, iy) {
+      let rCtr = contour3(ix, iy).addSegStrokeR(pl3La, 0).addSegStrokeR(0, param.H3 - pl3Ny).addSegStrokeR(-pl3Nx, pl3Ny).addSegStrokeR(-pl3La + pl3Nx + pl3Sx, 0).addSegStrokeR(-pl3Sx, -pl3Sy).closeSegStroke();
+      if (param.H3arc > 0) {
+        const lS2 = param.JaSouth + param.W1a + pl3S1 + param.W2 - param.V1;
+        const lN2 = param.JaNorth + param.W1a + pl3N1 + param.W2 - param.V1;
+        rCtr = contour3(ix, iy).addSegStrokeR(lS2, 0).addPointR(pl3x2, param.H3arc).addSegArc3(pi, false).addPointR(pl3x4, -param.H3arc).addSegArc3(0, true).addSegStrokeR(lN2, 0).addSegStrokeR(0, param.H3s - pl3Ny).addSegStrokeR(-pl3Nx, pl3Ny).addSegStrokeR(-lN2 + param.W2 + pl3Nx, 0).addPointR(-pl3x4 - param.W2, param.H3arc).addSegArc3(0, false).addPointR(-pl3x2 - param.W2, -param.H3arc).addSegArc3(pi, true).addSegStrokeR(-lS2 + param.W2 + pl3Sx, 0).addSegStrokeR(-pl3Sx, -pl3Sy).closeSegStroke();
+      }
+      return rCtr;
+    }, ctrPlank3S2 = function(ix, iy) {
+      const rCtr = contour3(ix, iy).addSegStrokeR(pl3S, 0).addSegStrokeR(0, param.H3).addSegStrokeR(-pl3S + pl3Sx, 0).addSegStrokeR(-pl3Sx, -pl3Sy).closeSegStroke();
+      return rCtr;
+    }, ctrPlank3M2 = function(ix, iy) {
+      let rCtr = ctrRectangle2(ix, iy, pl3M, param.H3s);
+      if (param.H3arc > 0) {
+        rCtr = contour3(ix, iy).addSegStrokeR(pl3x1, 0).addPointR(pl3x2, param.H3arc).addSegArc3(pi, false).addPointR(pl3x4, -param.H3arc).addSegArc3(0, true).addSegStrokeR(pl3x1, 0).addSegStrokeR(0, param.H3s).addSegStrokeR(-pl3x1 + param.W2, 0).addPointR(-pl3x4 - param.W2, param.H3arc).addSegArc3(0, false).addPointR(-pl3x2 - param.W2, -param.H3arc).addSegArc3(pi, true).addSegStrokeR(-pl3x1 + param.W2, 0).closeSegStroke();
+      }
+      return rCtr;
+    }, ctrPlank3N2 = function(ix, iy) {
+      const rCtr = contour3(ix, iy).addSegStrokeR(pl3N, 0).addSegStrokeR(0, param.H3 - pl3Ny).addSegStrokeR(-pl3Nx, pl3Ny).addSegStrokeR(-pl3N + pl3Nx, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank4S2 = function(ix, iy) {
+      const l4x0 = param.B4 / Math.sin(Ra);
+      const l4y0 = param.B4 / Math.cos(Ra);
+      const l3x0 = H32 + H32 / Math.tan(Ra) + W42 / Math.sin(Ra);
+      const l3x1 = param.JaSouth + param.W1a + laSouth + topXlow - W52 - l3x0;
+      const l4x2 = l3x1 * Math.cos(Ra);
+      const l4x1 = W42 / Math.tan(Ra) + H32 / Math.sin(Ra);
+      const l4x3 = param.ReS - l4x0 + l4x1 + l4x2 - param.W8 - param.S4e2 / 2;
+      const l4x4 = param.W8 + param.S4e2;
+      const l4x5 = RdSouth - l4x0 - l4x3 - l4x4;
+      const l4a1 = pi2 - aTop / 2;
+      const l4x6 = H741 * Math.tan(l4a1);
+      const l4x7 = param.W4 * Math.tan(l4a1);
+      const l4x8 = l4x5 - l4x6 - l4x7;
+      const l4q2 = Math.sqrt(l4x7 ** 2 + param.W4 ** 2) / 2;
+      const l4a2 = aTop / 2;
+      const l4y1 = -topYmid - pl6Sy;
+      const l4y2 = H741 / Math.cos(Ra);
+      const l4q4 = RdSouth - l4qS3 - param.Q4Init - param.S4 - (n7S - 1) * step7;
+      const rCtr = contour3(ix, iy + l4y0).addSegStrokeR(l4x0, -l4y0).addSegStrokeR(l4x3, 0).addSegStrokeR(0, param.P42).addSegStrokeR(l4x4, 0).addSegStrokeR(0, -param.P42).addSegStrokeR(l4x8, 0).addSegStrokeRP(l4a2, l4q2).addSegStrokeRP(pi - Ra, topXmid + W62).addSegStrokeRP(pi2 - Ra, l4y1 - l4y2).addSegStrokeR(-l4q4 + param.S4e / 2, 0);
+      for (let ii = 0; ii < n7S - 1; ii++) {
+        rCtr.addSegStrokeR(0, -param.P41).addSegStrokeR(-notch7W, 0).addSegStrokeR(0, param.P41).addSegStrokeR(-param.Q4 + param.S4e, 0);
+      }
+      rCtr.addSegStrokeR(0, -param.P41).addSegStrokeR(-notch7W, 0).addSegStrokeR(0, param.P41).addSegStrokeR(-param.Q4Init + param.S4e / 2, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank4Splaced2 = function(ix, iy) {
+      const rCtr = ctrPlank4S2(ix, iy).rotate(ix, iy, Ra);
+      return rCtr;
+    }, ctrPlank4N2 = function(ix, iy) {
+      const l4x0 = param.B4 / Math.sin(RaNorth);
+      const l4y0 = param.B4 / Math.cos(RaNorth);
+      const l3x0 = H32 + H32 / Math.tan(RaNorth) + W42 / Math.sin(RaNorth);
+      const l3x1 = param.JaNorth + param.W1a + laNorth - topXlow - W52 - l3x0;
+      const l4x2 = l3x1 * Math.cos(RaNorth);
+      const l4x1 = W42 / Math.tan(RaNorth) + H32 / Math.sin(RaNorth);
+      const l4x3 = param.ReN - l4x0 + l4x1 + l4x2 - param.W8 - param.S4e2 / 2;
+      const l4x4 = param.W8 + param.S4e2;
+      const l4x5 = RdNorth - l4x0 - l4x3 - l4x4;
+      const l4a1 = pi2 - aTop / 2;
+      const l4x6 = H741 * Math.tan(l4a1);
+      const l4x7 = param.W4 * Math.tan(l4a1);
+      const l4x8 = l4x5 - l4x6 - l4x7;
+      const l4x9 = l4x6 + l4x7;
+      const l4y1 = -topYmid - pl6Ny;
+      const l4y2 = H741 / Math.cos(RaNorth);
+      const l4q4 = RdNorth - l4qN3 - param.Q4Init - param.S4 - (n7N - 1) * step7;
+      const rCtr = contour3(ix + l4x9, iy).addSegStrokeR(l4x8, 0).addSegStrokeR(0, param.P42).addSegStrokeR(l4x4, 0).addSegStrokeR(0, -param.P42).addSegStrokeR(l4x3, 0).addSegStrokeR(l4x0, l4y0).addSegStrokeR(0, param.W4 - l4y0).addSegStrokeR(-param.Q4Init + param.S4e / 2, 0).addSegStrokeR(0, -param.P41).addSegStrokeR(-notch7W, 0).addSegStrokeR(0, param.P41);
+      for (let ii = 0; ii < n7N - 1; ii++) {
+        rCtr.addSegStrokeR(-param.Q4 + param.S4e, 0).addSegStrokeR(0, -param.P41).addSegStrokeR(-notch7W, 0).addSegStrokeR(0, param.P41);
+      }
+      rCtr.addSegStrokeR(-l4q4 + param.S4e / 2, 0).addSegStrokeRP(-pi2 + RaNorth, l4y1 - l4y2).addSegStrokeRP(pi + RaNorth, W62 - topXmid).closeSegStroke();
+      return rCtr;
+    }, ctrPlank4Nplaced2 = function(ix, iy) {
+      const rCtr = ctrPlank4N2(ix - RdNorth, iy).rotate(ix, iy, -RaNorth);
+      return rCtr;
+    }, ctrPlank5a2 = function(ix, iy) {
+      const ctrShifted = contour3(ix, iy).addSegStrokeR(l8N4, 0).addSegStrokeR(0, param.P5).addSegStrokeR(l8N33, 0).addSegStrokeR(0, -param.P5).addSegStrokeR(l8N32 + pl5Nl, 0).addSegStrokeR(pl5Ny, W52).addSegStrokeR(-pl5Sy, W52).addSegStrokeR(-pl5Sl - l8S32, 0).addSegStrokeR(0, -param.P5).addSegStrokeR(-l8S33, 0).addSegStrokeR(0, param.P5).addSegStrokeR(-l8S4, 0).closeSegStroke();
+      const ctrAligned = contour3(ix, iy).addSegStrokeR(l8N4, 0).addSegStrokeR(0, param.P5).addSegStrokeR(l8N33, 0).addSegStrokeR(0, -param.P5).addSegStrokeR(l8N32 + pl5Nl2, 0).addSegStrokeR(pl5yN, W52).addSegStrokeR(pl5yM, 0).addSegStrokeR(-pl5yS, W52).addSegStrokeR(-pl5Sl2 - l8S32, 0).addSegStrokeR(0, -param.P5).addSegStrokeR(-l8S33, 0).addSegStrokeR(0, param.P5).addSegStrokeR(-l8S4, 0).closeSegStroke();
+      const rCtr = param.top_opt ? ctrAligned : ctrShifted;
+      return rCtr;
+    }, ctrPlank5aPlaced2 = function(ix, iy) {
+      const rCtr = ctrPlank5a2(ix - pl5Lbottom, iy - param.W5a).rotate(ix, iy, pi2);
+      return rCtr;
+    }, ctrPlank5b2 = function(ix, iy) {
+      const l8h = Math.max(pl5Nl2 + Math.abs(pl5yM), pl5Nl + pl5Ny);
+      const lx1 = l8h + lp5p6 - param.dtQ - param.dtY - pldtP2 - pldtPe2;
+      const lx2 = l8h - lx1 - pldtP3;
+      const rCtr = contour3(ix, iy + param.W5bs).addSegStrokeR(l5l, 0).addSegStrokeR(0, -param.W5bs).addSegStrokeR(lx1, 0).addSegStrokeR(0, param.dtP).addSegStrokeR(pldtP3, 0).addSegStrokeR(0, -param.dtP).addSegStrokeR(lx2, 0).addSegStrokeR(0, l5W).addSegStrokeR(-lx2, 0).addSegStrokeR(0, -param.dtP).addSegStrokeR(-pldtP3, 0).addSegStrokeR(0, param.dtP).addSegStrokeR(-lx1, 0).addSegStrokeR(0, -param.W5bs).addSegStrokeR(-l5l, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank5bPlaced2 = function(ix, iy) {
+      const rCtr = ctrPlank5b2(ix - l5l, iy - l5W / 2).rotate(ix, iy, pi2);
+      return rCtr;
+    }, ctrPlank6b2 = function(ix, iy) {
+      const rCtr = contour3(ix, iy).addSegStrokeR(param.dtF - pl6Qe2, 0).addSegStrokeR(0, param.dtQ).addSegStrokeR(pl6Q1, 0);
+      for (let ii = 0; ii < param.Nb1 - 1; ii++) {
+        rCtr.addSegStrokeR(0, -param.dtQ).addSegStrokeR(pl6Q2, 0).addSegStrokeR(0, param.dtQ).addSegStrokeR(pl6Q3, 0).addSegStrokeR(0, -param.dtQ).addSegStrokeR(pl6Q4, 0).addSegStrokeR(0, param.dtQ).addSegStrokeR(pl6Q3, 0).addSegStrokeR(0, -param.dtQ).addSegStrokeR(pl6Q2, 0).addSegStrokeR(0, param.dtQ).addSegStrokeR(pl6Q1, 0);
+      }
+      rCtr.addSegStrokeR(0, -param.dtQ).addSegStrokeR(param.dtF - pl6Qe2, 0).addSegStrokeR(0, pl6bH).addSegStrokeR(-pl6bL, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank6c2 = function(ix, iy) {
+      const ctrPeak = contour3(ix, iy).addSegStrokeR(param.W6, 0).addSegStrokeR(0, param.dtQ - topYmid - pl6Ny).addSegStrokeR(-W62, pl6Ny).addSegStrokeR(-W62, -pl6Sy).closeSegStroke();
+      const ctrSquare = ctrRectangle2(ix, iy, param.W6, param.H6);
+      const rCtr = param.peak6 ? ctrSquare : ctrPeak;
+      return rCtr;
+    }, ctrPlank8S2 = function(ix, iy) {
+      const rCtr = contour3(ix, iy).addSegStrokeR(l8S1 + l8S2, 0).addSegStrokeRP(pi2 - Ra, param.P5).addSegStrokeRP(pi - Ra, l8S33).addSegStrokeRP(-pi2 - Ra, param.P5).addSegStrokeRP(pi - Ra, l8S32).addSegStrokeR(-l8S1, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank8Splaced2 = function(ix, iy, ia) {
+      const rCtr = ctrPlank8S2(ix - l8S1, iy - param.W8).rotate(ix, iy, ia);
+      return rCtr;
+    }, ctrPlank8N2 = function(ix, iy) {
+      const rCtr = contour3(ix, iy).addSegStrokeR(l8N1, 0).addSegStrokeRP(RaNorth, l8N32).addSegStrokeRP(RaNorth - pi2, param.P5).addSegStrokeRP(RaNorth, l8N33).addSegStrokeRP(RaNorth + pi2, param.P5).addSegStrokeR(-l8N1 - l8N2, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlank8Nplaced2 = function(ix, iy, ia) {
+      const rCtr = ctrPlank8N2(ix - l8N1, iy).rotate(ix, iy, pi + ia);
+      return rCtr;
+    }, ctrPlankDiagTop2 = function(ix, iy, ik) {
+      const pdtx2 = Math.sqrt((param.dtY + pldtP2) ** 2 + (param.dtX + pl6Q22) ** 2);
+      const pdtx3 = Math.sqrt(param.dtX ** 2 + param.dtY ** 2);
+      const pdty1 = ik === 1 ? 0 : param.dtW;
+      const pdty2 = param.dtP * Math.cos(pl6da);
+      const rCtr = contour3(ix, iy + pdty1 + ik * pdty2).addSegStrokeRP(ik * (-pi2 + pl6da), param.dtP).addSegStrokeR(pdtx2, 0).addSegStrokeRP(ik * pl6da, param.dtQ).addSegStrokeRP(ik * (pi2 + pl6da), pl6Q23).addSegStrokeRP(ik * (pi + pl6da), param.dtQ).addSegStrokeRP(ik * (pi2 + pl6da), pl6Q21).addSegStrokeR(-pdtx3, 0).addSegStrokeRP(ik * (pi + pl6da), pldtP1).addSegStrokeRP(ik * (pi2 + pl6da), param.dtP).closeSegStroke();
+      return rCtr;
+    }, ctrPlankDiagTopPlaced2 = function(ix, iy, ia, ik) {
+      const pdtx4 = pldtP2 * Math.cos(pl6da) + param.dtP * Math.sin(pl6da);
+      const aa0 = pi2 - ik * ia;
+      const pdty4 = ik === 1 ? param.dtW : 0;
+      const rCtr = ctrPlankDiagTop2(ix - pdtx4, iy - pdty4, ik).rotate(ix, iy, aa0);
+      return rCtr;
+    }, ctrPlankDiagA2 = function(ix, iy, ik) {
+      const pdty1 = ik === 1 ? 0 : param.daW;
+      const pdtx2 = param.daE + param.H3 / (2 * Math.cos(pldaA));
+      const pdtx3 = param.daW / 2 * Math.tan(pldaA);
+      const pdtx4 = Math.sqrt(param.daX ** 2 + param.daY ** 2);
+      const pdtx5 = pdtx2 + pdtx3 + pdtx4;
+      const pdtx6 = param.daW / Math.tan(pldaA);
+      const pdtx7 = pdtx5 + pdtx6;
+      const rCtr = contour3(ix, iy + pdty1).addSegStrokeR(pdtx5, 0).addSegStrokeRP(ik * pldaA, pldaP1).addSegStrokeRP(ik * (pldaA - pi2), param.daP).addSegStrokeRP(ik * pldaA, pldaP3).addSegStrokeRP(ik * (pldaA + pi2), param.daP).addSegStrokeR(-pdtx7, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlankDiagAplaced2 = function(ix, iy, ia, ik) {
+      const aa0 = -pi2 - ik * ia;
+      const rCtr = ctrPlankDiagA2(ix - param.daE, iy - param.daW / 2, ik).rotate(ix, iy, aa0);
+      return rCtr;
+    }, ctrPlankDiagB2 = function(ix, iy, ik) {
+      const pdty1 = ik === 1 ? 0 : param.dbW;
+      const pdtx2 = param.dbE + param.H2 / (2 * Math.cos(pldbA));
+      const pdtx3 = param.dbW / 2 * Math.tan(pldbA);
+      const pdtx4 = Math.sqrt(param.dbX ** 2 + param.dbY ** 2);
+      const pdtx5 = pdtx2 + pdtx3 + pdtx4;
+      const pdtx6 = param.dbW / Math.tan(pldbA);
+      const pdtx7 = pdtx5 + pdtx6;
+      const rCtr = contour3(ix, iy + pdty1).addSegStrokeR(pdtx5, 0).addSegStrokeRP(ik * pldbA, pldbP1).addSegStrokeRP(ik * (pldbA - pi2), param.dbP).addSegStrokeRP(ik * pldbA, pldbP3).addSegStrokeRP(ik * (pldbA + pi2), param.dbP).addSegStrokeR(-pdtx7, 0).closeSegStroke();
+      return rCtr;
+    }, ctrPlankDiagBplaced2 = function(ix, iy, ia, ik) {
+      const aa0 = -pi2 - ik * ia;
+      const rCtr = ctrPlankDiagB2(ix - param.dbE, iy - param.dbW / 2, ik).rotate(ix, iy, aa0);
+      return rCtr;
+    };
+    var JaMin = JaMin2, ctrPlank1a = ctrPlank1a2, ctrPlank1aPlaced = ctrPlank1aPlaced2, ctrPlank1b = ctrPlank1b2, ctrPlank1bPlaced = ctrPlank1bPlaced2, ctrPlank2EE = ctrPlank2EE2, ctrPlank2Slot = ctrPlank2Slot2, ctrPlank2Short = ctrPlank2Short2, ctrPlank3EE = ctrPlank3EE2, ctrPlank3S = ctrPlank3S2, ctrPlank3M = ctrPlank3M2, ctrPlank3N = ctrPlank3N2, ctrPlank4S = ctrPlank4S2, ctrPlank4Splaced = ctrPlank4Splaced2, ctrPlank4N = ctrPlank4N2, ctrPlank4Nplaced = ctrPlank4Nplaced2, ctrPlank5a = ctrPlank5a2, ctrPlank5aPlaced = ctrPlank5aPlaced2, ctrPlank5b = ctrPlank5b2, ctrPlank5bPlaced = ctrPlank5bPlaced2, ctrPlank6b = ctrPlank6b2, ctrPlank6c = ctrPlank6c2, ctrPlank8S = ctrPlank8S2, ctrPlank8Splaced = ctrPlank8Splaced2, ctrPlank8N = ctrPlank8N2, ctrPlank8Nplaced = ctrPlank8Nplaced2, ctrPlankDiagTop = ctrPlankDiagTop2, ctrPlankDiagTopPlaced = ctrPlankDiagTopPlaced2, ctrPlankDiagA = ctrPlankDiagA2, ctrPlankDiagAplaced = ctrPlankDiagAplaced2, ctrPlankDiagB = ctrPlankDiagB2, ctrPlankDiagBplaced = ctrPlankDiagBplaced2;
+    const H2H3 = param.H2 + param.H3;
+    const W1a2V1 = param.W1a - 2 * param.V1;
+    const W1b2U1 = param.W1b - 2 * param.U1;
+    const aDist = [];
+    if (param.SecondPoleSouth === 1) {
+      aDist.push(param.KaSouth);
+    }
+    aDist.push(param.La);
+    if (param.SecondPoleNorth === 1) {
+      aDist.push(param.KaNorth);
+    }
+    const aPos = [0];
+    let aDistAcc = 0;
+    for (const iDist of aDist) {
+      aDistAcc += iDist + param.W1a;
+      aPos.push(aDistAcc);
+    }
+    const Na = aPos.length;
+    const la = Na * param.W1a + aDist.reduce((acc, cur) => acc + cur, 0);
+    const lb = param.Nb1 * param.W1b + (param.Nb1 - 1) * param.Lb;
+    const lbWall = lb / 1e3;
+    const laWall = la / 1e3;
+    const lbInner = lbWall - 2 * param.W1b / 1e3;
+    const laInner = laWall - 2 * param.W1a / 1e3;
+    const lbRoof = lbWall;
+    const laRoof = laWall + (param.JaSouth + param.JaNorth) / 1e3;
+    const stepX = param.W1b + param.Lb;
+    const W1a2 = param.W1a / 2;
+    const W1b2 = param.W1b / 2;
+    const H12c = param.H1 + param.H2 * (param.bSplit ? 2 : 1);
+    const H123c = H12c + param.H3;
+    const H22 = param.H2 / 2;
+    const D2H = param.H1 + H22;
+    const D3H = H12c + param.H3 / 2;
+    const R2 = param.D2 / 2;
+    const R3 = param.D3 / 2;
+    const H1H2 = param.H1 + param.H2;
+    const pl3La = la + param.JaSouth + param.JaNorth;
+    const W3U1 = param.W3 - param.U1;
+    const W2V1 = param.W2 - param.V1;
+    const W1bU1 = param.W1b - param.U1;
+    const W1aV1 = param.W1a - param.V1;
+    const pl2Lb = lb + 2 * W3U1;
+    const H123 = H1H2 + param.H3;
+    const LaMin = 2 * (param.W3 - param.U1);
+    const LbMin = 2 * (param.W2 - param.V1);
+    const H32 = param.H3 / 2;
+    const W42 = param.W4 / 2;
+    const H741 = param.H7 - param.P41;
+    const Ra = degToRad(param.Ra);
+    const pi = Math.PI;
+    const pi2 = pi / 2;
+    const laIn = la - 2 * param.W1a;
+    const laSouth = laIn * param.Rt / 100;
+    const laNorth = laIn - laSouth;
+    const laSideS = param.JaSouth - H32 + param.W1a;
+    const laSideN = param.JaNorth - H32 + param.W1a;
+    const W47 = W42 - param.P41 + param.H7;
+    const Xsouth = laSouth + laSideS;
+    const RdSouth1 = Xsouth / Math.cos(Ra) + W47 * Math.tan(Ra);
+    const RdSouth = RdSouth1 + param.ReS;
+    const hypS2 = RdSouth1 ** 2 + W47 ** 2;
+    const Ytop2 = hypS2 - Xsouth ** 2;
+    const Ytop = Math.sqrt(Ytop2);
+    const Xnorth = laNorth + laSideN;
+    const hypN2 = Ytop2 + Xnorth ** 2;
+    const hypN = Math.sqrt(hypN2);
+    const RdNorth1 = Math.sqrt(hypN2 - W47 ** 2);
+    const RdNorth = RdNorth1 + param.ReN;
+    const aT1 = Math.atan2(W47, RdSouth1);
+    const aT2 = Math.atan2(Xsouth, Ytop);
+    const aT3 = Math.atan2(Xnorth, Ytop);
+    const aT4 = Math.atan2(W47, hypN);
+    const aTop = aT1 + aT2 + aT3 + aT4;
+    const RaNorth = pi - Ra - aTop;
+    const p1Sx = W42 * Math.cos(Ra - pi2);
+    const p1Sy = W42 * Math.sin(Ra - pi2);
+    const R4 = param.D4 / 2;
+    const p2Sy = H32 + R4;
+    const p2Sx = p2Sy / Math.tan(Ra);
+    const W441 = W42 - param.P41;
+    const p3Sx = W441 * Math.cos(pi2 + Ra) - param.ReS * Math.cos(Ra);
+    const p3Sy = W441 * Math.sin(pi2 + Ra) - param.ReS * Math.sin(Ra);
+    const p4Sx = param.ReS * Math.cos(Ra + pi);
+    const p4Sy = param.ReS * Math.sin(Ra + pi);
+    const p1Nx = W42 * Math.cos(-pi2 - RaNorth);
+    const p1Ny = W42 * Math.sin(-pi2 - RaNorth);
+    const p2Ny = p2Sy;
+    const p2Nx = -p2Ny / Math.tan(RaNorth);
+    const p3Nx = W441 * Math.cos(pi2 - RaNorth) + param.ReN * Math.cos(RaNorth);
+    const p3Ny = W441 * Math.sin(pi2 - RaNorth) - param.ReN * Math.sin(RaNorth);
+    const p4Nx = param.ReN * Math.cos(-RaNorth);
+    const p4Ny = param.ReN * Math.sin(-RaNorth);
+    const pTopx = param.W1a + laSouth;
+    const H2c = param.bSplit === 1 ? param.H2 : 0;
+    const pTopy = H123 + H2c - H32 + Ytop;
+    const aMid = -RaNorth - aTop / 2;
+    const topD1 = (param.H7 - param.P41) / Math.sin(aTop / 2);
+    const topD2 = param.W4 / Math.sin(aTop / 2);
+    const topYmid = (topD1 + topD2 / 2) * Math.sin(aMid);
+    const topXmid = (topD1 + topD2 / 2) * Math.cos(aMid);
+    const topYlow = (topD1 + topD2) * Math.sin(aMid);
+    const topXlow = (topD1 + topD2) * Math.cos(aMid);
+    const lp5p6 = Math.abs(topD2 / 2 * Math.sin(aMid));
+    const pl3S1 = param.SecondPoleSouth ? param.KaSouth + param.W1a : 0;
+    const pl3N1 = param.SecondPoleNorth ? param.KaNorth + param.W1a : 0;
+    const pl3x1 = param.W1a + 2 * (param.W2 - param.V1);
+    const pl3x2 = laSouth - pl3S1 - param.W2 + param.V1;
+    const pl3x4 = laNorth - pl3N1 - param.W2 + param.V1;
+    const W52 = param.W5a / 2;
+    const pl5Sy = W52 * Math.tan(Ra);
+    const pl5Ny = W52 * Math.tan(RaNorth);
+    const ptPl5y2 = pTopy + topYlow;
+    const l81y = param.H3arc + (param.aSplit ? param.H3s : 0);
+    const H3c = (param.H3 + param.H3s) / 2;
+    const ptPl5y0 = H123 + H2c + l81y;
+    const pl5Nl = ptPl5y2 - pl5Ny - ptPl5y0;
+    const pl5Sl = ptPl5y2 - pl5Sy - ptPl5y0;
+    const R5 = param.D5 / 2;
+    const pl5yN = W52 * Math.tan(RaNorth);
+    const pl5yS = W52 * Math.tan(Ra);
+    const pl5yMN = (W42 + W47) / Math.cos(RaNorth);
+    const pl5yMS = (W42 + W47) / Math.cos(Ra);
+    const pl5yM = pl5yMN - pl5yMS;
+    const pl5Nl2 = Ytop - H32 - l81y - pl5yMN - pl5yN;
+    const pl5Sl2 = Ytop - H32 - l81y - pl5yMS - pl5yS;
+    const ptPl5x00 = param.top_opt ? pTopx - W52 : pTopx + topXlow - W52;
+    const W62 = param.W6 / 2;
+    const pl6Sy = W62 * Math.tan(Ra);
+    const pl6Ny = W62 * Math.tan(RaNorth);
+    const ptPl6x0 = pTopx - W62;
+    const ptPl6y0 = pTopy + topYmid;
+    const l4qS3 = Math.sqrt(pl6Sy ** 2 + W62 ** 2) + H741 * Math.tan(Ra);
+    const l4qN3 = Math.sqrt(pl6Ny ** 2 + W62 ** 2) + H741 * Math.tan(RaNorth);
+    const notch7W = param.S4 + param.S4e;
+    const step7 = param.S4 + param.Q4;
+    const SQ4Init = param.S4 + param.Q4Init;
+    const n7S = Math.floor((RdSouth - SQ4Init - l4qS3) / step7) + 1 - param.dropLastS;
+    const n7N = Math.floor((RdNorth - SQ4Init - l4qN3) / step7) + 1 - param.dropLastN;
+    const l82y = l81y + H32;
+    const l8S1x = Xsouth - l82y / Math.tan(Ra) - W52 + (param.top_opt ? 0 : topXlow);
+    const l8S1 = l8S1x * Math.sin(Ra) - W42 + param.P42;
+    const l8S2 = param.W8 / Math.tan(Ra);
+    const l8S3 = param.W8 / Math.sin(Ra);
+    const l8S32 = param.P5 / Math.tan(Ra);
+    const l8S33 = l8S3 - l8S32;
+    const l8N1x = Xnorth - l82y / Math.tan(RaNorth) - W52 - (param.top_opt ? 0 : topXlow);
+    const l8N1 = l8N1x * Math.sin(RaNorth) - W42 + param.P42;
+    const l8N2 = param.W8 / Math.tan(RaNorth);
+    const l8N3 = param.W8 / Math.sin(RaNorth);
+    const l8N32 = param.P5 / Math.tan(RaNorth);
+    const l8N33 = l8N3 - l8N32;
+    const pl5botMin = param.aSplit ? param.H3s : param.H3;
+    const pl5Lbottom = Math.max(Math.max(l8N3, l8S3) + param.G5Min, pl5botMin);
+    const l8S4 = pl5Lbottom - l8S3;
+    const l8N4 = pl5Lbottom - l8N3;
+    const l5l = l8N4 + l8N33 + l8N32;
+    const l5W = param.W1b + 2 * (param.W5bs - param.U1);
+    const pl3Sx0 = -param.JaSouth;
+    const pl3S = param.JaSouth + 2 * param.W1a + param.KaSouth + param.W2 - param.V1;
+    const pl3Mx0 = param.W1a + param.KaSouth - param.W2 + param.V1;
+    const pl3M = 2 * (param.W1a + param.W2 - param.V1) + param.La;
+    const pl3Nx0 = 2 * param.W1a + param.KaSouth + param.La - param.W2 + param.V1;
+    const pl3N = param.W2 - param.V1 + 2 * param.W1a + param.KaNorth + param.JaNorth;
+    const d3P1P1234 = 1 + param.d3Plank1SN;
+    const d3P1P23 = d3P1P1234 === 2 || d3P1P1234 === 3 ? true : false;
+    const pl3Nz1 = W441 / Math.cos(RaNorth);
+    const pl3Nz2 = H32 - pl3Nz1;
+    const pl3Nz3 = pl3Nz2 / Math.tan(RaNorth);
+    const pl3Nx = Math.max(H32 + pl3Nz3, 1);
+    const pl3Ny = Math.min(pl3Nx * Math.tan(RaNorth), 2 * H32 - 1);
+    const pl3Sz1 = W441 / Math.cos(Ra);
+    const pl3Sz2 = H32 - pl3Sz1;
+    const pl3Sz3 = pl3Sz2 / Math.tan(Ra);
+    const pl3Sx = Math.max(H32 + pl3Sz3, 1);
+    const pl3Sy = Math.min(pl3Sx * Math.tan(Ra), 2 * H32 - 1);
+    const pl6Qe = param.dtQe;
+    const pl6Qe2 = pl6Qe / 2;
+    const pl6bL = lb + 2 * (param.W5bs + param.dtF - param.U1);
+    const pl6bH = param.dtQ - topYmid;
+    const pl6da = Math.atan2(param.dtX, param.dtY);
+    const pl6Q21 = param.dtQ * Math.tan(pl6da);
+    const pl6Q22 = param.dtW / Math.cos(pl6da);
+    const pl6Q23 = pl6Q22 - pl6Q21;
+    const pl6Q1 = l5W + pl6Qe;
+    const pl6Q2 = param.dtX + pl6Q21 - pl6Qe;
+    const pl6Q3 = pl6Q23 + pl6Qe;
+    const pl6Q4 = param.Lb + 2 * (param.U1 - pl6Q2 - pl6Q3 - param.W5bs) - pl6Qe;
+    const pldtPe = param.dtPe;
+    const pldtPe2 = pldtPe / 2;
+    const pldtP1 = param.dtP / Math.tan(pl6da);
+    const pldtP2 = param.dtW / Math.sin(pl6da);
+    const pldtP3 = pldtP2 - pldtP1 + pldtPe;
+    const daR = param.daD / 2;
+    const pldaPe = param.daPe;
+    const pldaPe2 = pldaPe / 2;
+    const pldaA = Math.atan2(param.daX, param.daY);
+    const pldaX = param.daX + param.daW / (2 * Math.cos(pldaA)) + H32 * Math.tan(pldaA);
+    const pldaP1 = param.daP / Math.tan(pldaA);
+    const pldaP2 = param.daW / Math.sin(pldaA);
+    const pldaP3 = pldaP2 - pldaP1;
+    const dbR = param.dbD / 2;
+    const pldbPe = param.dbPe;
+    const pldbPe2 = pldbPe / 2;
+    const pldbA = Math.atan2(param.dbX, param.dbY);
+    const pldbX = param.dbX + param.dbW / (2 * Math.cos(pldbA)) + H22 * Math.tan(pldbA);
+    const pldbP1 = param.dbP / Math.tan(pldbA);
+    const pldbP2 = param.dbW / Math.sin(pldbA);
+    const pldbP3 = pldbP2 - pldbP1;
+    const pl4W = param.W1b - 2 * param.U1;
+    const pl5aW = pl4W + 2 * param.W5bs;
+    const pl5bW = param.W5a;
+    if (param.aSplit === 1 && param.SecondPoleNorth + param.SecondPoleSouth < 2) {
+      throw `err296: aSplit ${param.aSplit} is active but inactive SecondPoleNorth ${param.SecondPoleNorth} or SecondPoleSouth ${param.SecondPoleSouth}`;
+    }
+    if (W1a2V1 < 1) {
+      throw `err096: W1a ${param.W1a} is too small compare to V1 ${param.V1} mm`;
+    }
+    if (W1b2U1 < 1) {
+      throw `err099: W1b ${param.W1b} is too small compare to U1 ${param.U1} mm`;
+    }
+    if (param.JaSouth < JaMin2(Ra)) {
+      throw `err191: JaSouth ${ffix2(param.JaSouth)} must be bigger than JaMin ${ffix2(JaMin2(Ra))} mm`;
+    }
+    if (param.JaNorth < JaMin2(RaNorth)) {
+      throw `err234: JaNorth ${ffix2(param.JaNorth)} must be bigger than JaMin ${ffix2(JaMin2(RaNorth))} mm`;
+    }
+    if (param.P41 > W42 + R4) {
+      throw `err287: P41 ${ffix2(param.P41)} is too big compare to W4 ${ffix2(param.W4)} and D4 ${ffix2(param.D4)} mm`;
+    }
+    if (param.P41 > param.H7) {
+      throw `err291: P41 ${ffix2(param.P41)} is too big compare to H7 ${ffix2(param.H7)} mm`;
+    }
+    if (param.Lb < LbMin) {
+      throw `err318: Lb ${ffix2(param.Lb)} is too small compare to LbMin ${ffix2(LbMin)} mm`;
+    }
+    if (param.La < LaMin) {
+      throw `err322: La ${ffix2(param.La)} is too small compare to LaMin ${ffix2(LaMin)} mm`;
+    }
+    if (param.KaNorth < LaMin) {
+      throw `err325: KaNorth ${ffix2(param.KaNorth)} is too small compare to LaMin ${ffix2(LaMin)} mm`;
+    }
+    if (param.KaSouth < LaMin) {
+      throw `err328: KaSouth ${ffix2(param.KaSouth)} is too small compare to LaMin ${ffix2(LaMin)} mm`;
+    }
+    rGeome.logstr += `Inner size X: ${ffix2(lbInner)} Y: ${ffix2(laInner)} m, S: ${ffix2(lbInner * laInner)} m2
+`;
+    rGeome.logstr += `Wall size X: ${ffix2(lbWall)} Y: ${ffix2(laWall)} m, S: ${ffix2(lbWall * laWall)} m2
+`;
+    rGeome.logstr += `Roof size X: ${ffix2(lbRoof)} Y: ${ffix2(laRoof)} m, S: ${ffix2(lbRoof * laRoof)} m2
+`;
+    rGeome.logstr += `Pole Horizontal B (W-E): W: ${ffix2(param.W2)} H: ${ffix2(param.H2)} L: ${ffix2(pl2Lb)} mm x${Na * 2}
+`;
+    rGeome.logstr += `Pole Horizontal A (N-S): W: ${ffix2(param.W3)} H: ${ffix2(param.H3)} L: ${ffix2(pl3La)} mm x${param.Nb1 * 2}
+`;
+    rGeome.logstr += `Pole Vertical: W1a: ${ffix2(param.W1a)} W1b: ${ffix2(param.W1b)} H: ${ffix2(H123)} mm x${Na * param.Nb1}
+`;
+    rGeome.logstr += `Top position: laSouth: ${ffix2(laSouth)} laNorth: ${ffix2(laNorth)} Ytop ${ffix2(Ytop)} mm
+`;
+    rGeome.logstr += `Roof south: RdSouth1: ${ffix2(RdSouth1)} RdSouth: ${ffix2(RdSouth)} mm
+`;
+    rGeome.logstr += `Roof north: RdNorth1: ${ffix2(RdNorth1)} RdNorth: ${ffix2(RdNorth)} mm RaNorth ${ffix2(radToDeg(RaNorth))} degree
+`;
+    rGeome.logstr += `Top angle: ${ffix2(radToDeg(aTop))} degree
+`;
+    for (const yj of aPos) {
+      for (let ii = 0; ii < param.Nb1; ii++) {
+        figBase.addMainO(ctrRectangle2(ii * stepX, yj, param.W1b, param.W1a));
+        figBase.addSecond(ctrRectangle2(-W3U1, yj + param.V1 - param.W2, pl2Lb, param.W2));
+        figBase.addSecond(ctrRectangle2(-W3U1, yj + W1aV1, pl2Lb, param.W2));
+      }
+    }
+    for (let ii = 0; ii < param.Nb1; ii++) {
+      figBase.addSecond(ctrRectangle2(ii * stepX - W3U1, -param.JaSouth, param.W3, pl3La));
+      figBase.addSecond(ctrRectangle2(ii * stepX + W1bU1, -param.JaSouth, param.W3, pl3La));
+    }
+    for (let ii = 0; ii < param.Nb1; ii++) {
+      const ix = ii * stepX;
+      const westLoHiPre = param.bSplit === 1 ? ii % 2 : 0;
+      const westLoHi = ii === 0 ? 2 : westLoHiPre;
+      const eastLoHiPre = param.bSplit === 1 ? 1 - ii % 2 : 0;
+      const eastLoHi = ii === param.Nb1 - 1 ? 2 : eastLoHiPre;
+      const ctrSouth = [ctrPlank1bPlaced2(ix, 0, westLoHi, eastLoHi, 1)];
+      if (R2 > 0) {
+        ctrSouth.push(contourCircle3(ix + W1a2, D2H, R2));
+        if (param.bSplit === 1) {
+          ctrSouth.push(contourCircle3(ix + W1a2, D2H + param.H2, R2));
+        }
+      }
+      figSouth.addMainOI(ctrSouth);
+      figSouth.addSecond(ctrRectangle2(ix - W3U1, H1H2 + H2c, param.W3, param.H3));
+      figSouth.addSecond(ctrRectangle2(ix + W1bU1, H1H2 + H2c, param.W3, param.H3));
+      figSouth.addSecond(ctrPlank5bPlaced2(ix + W1b2, ptPl5y0));
+    }
+    if (param.bSplit === 1) {
+      for (let ii = 0; ii < param.Nb1 - 1; ii++) {
+        const H2alt = ii % 2 === 0 ? param.H2 : 0;
+        figSouth.addSecond(ctrPlank2Slot2(-W3U1 + ii * stepX, param.H1 + H2alt));
+      }
+    } else {
+      figSouth.addSecond(ctrPlank2EE2(-W3U1, param.H1));
+    }
+    figSouth.addSecond(ctrPlank6b2(param.U1 - param.W5bs - param.dtF, ptPl6y0 - param.dtQ));
+    for (let ii = 0; ii < param.Nb1 - 1; ii++) {
+      const ix = ii * stepX + W1b2 + l5W / 2;
+      const yy0 = ptPl6y0 - param.dtQ - param.dtY;
+      figSouth.addSecond(ctrPlankDiagTopPlaced2(ix, yy0, pl6da, 1));
+    }
+    for (let ii = 1; ii < param.Nb1; ii++) {
+      const ix = ii * stepX + W1b2 - l5W / 2;
+      const yy0 = ptPl6y0 - param.dtQ - param.dtY;
+      figSouth.addSecond(ctrPlankDiagTopPlaced2(ix, yy0, pl6da, -1));
+    }
+    for (let ii = 0; ii < param.Nb1 - 1; ii++) {
+      const ix = ii * stepX + param.W1b + pldbX;
+      const yy1 = ii % 2 === 0 && param.bSplit === 1 ? param.H2 : 0;
+      const yy2 = param.H1 + H22 + yy1;
+      figSouth.addSecond(ctrPlankDiagBplaced2(ix, yy2, pldbA, 1));
+      figSouth.addSecond(contourCircle3(ix, yy2, dbR));
+    }
+    for (let ii = 1; ii < param.Nb1; ii++) {
+      const ix = ii * stepX - pldbX;
+      const yy1 = ii % 2 === 1 && param.bSplit === 1 ? param.H2 : 0;
+      const yy2 = param.H1 + H22 + yy1;
+      figSouth.addSecond(ctrPlankDiagBplaced2(ix, yy2, pldbA, -1));
+      figSouth.addSecond(contourCircle3(ix, yy2, dbR));
+    }
+    for (const [idx, ix] of aPos.entries()) {
+      let p1234 = idx + 1 === Na ? 4 : 1 + idx;
+      if (Na === 3 && param.SecondPoleNorth === 1 && idx === 1) {
+        p1234 = 3;
+      }
+      const ctrEast = [ctrPlank1aPlaced2(ix, 0, p1234)];
+      if (R3 > 0) {
+        ctrEast.push(contourCircle3(ix + W1a2, D3H, R3));
+        if ((idx === 1 || idx === 2) && param.aSplit === 1) {
+          ctrEast.push(contourCircle3(ix + W1a2, D3H + H3c, R3));
+        }
+      }
+      figEast.addMainOI(ctrEast);
+      figEast.addSecond(ctrRectangle2(ix - W2V1, param.H1, param.W2, param.H2));
+      figEast.addSecond(ctrRectangle2(ix + W1aV1, param.H1, param.W2, param.H2));
+      if (param.bSplit === 1) {
+        figEast.addSecond(ctrRectangle2(ix - W2V1, H1H2, param.W2, param.H2));
+        figEast.addSecond(ctrRectangle2(ix + W1aV1, H1H2, param.W2, param.H2));
+      }
+    }
+    if (param.aSplit === 1) {
+      figEast.addSecond(ctrPlank3S2(pl3Sx0, H1H2 + H2c));
+      figEast.addSecond(ctrPlank3M2(pl3Mx0, H123 + H2c));
+      figEast.addSecond(ctrPlank3N2(pl3Nx0, H1H2 + H2c));
+    } else {
+      figEast.addSecond(ctrPlank3EE2(pl3Sx0, H1H2 + H2c));
+    }
+    for (const [idx, ix] of aPos.entries()) {
+      const H1H2c = H1H2 + H2c + H32;
+      const H3ac = param.aSplit === 1 ? param.H3 : 0;
+      if (idx < Na - 1) {
+        const H1H2cc = idx === 1 ? H1H2c + H3ac : H1H2c;
+        figEast.addSecond(ctrPlankDiagAplaced2(ix + param.W1a + pldaX, H1H2cc, pldaA, 1));
+        figEast.addSecond(contourCircle3(ix + param.W1a + pldaX, H1H2cc, daR));
+      }
+      if (idx > 0) {
+        const H1H2cc = idx === 2 ? H1H2c + H3ac : H1H2c;
+        figEast.addSecond(ctrPlankDiagAplaced2(ix - pldaX, H1H2cc, pldaA, -1));
+        figEast.addSecond(contourCircle3(ix - pldaX, H1H2cc, daR));
+      }
+    }
+    const p0Sx = -param.JaSouth + H32;
+    const p0Sy = D3H;
+    figEast.addSecond(contourCircle3(p0Sx, p0Sy, R4));
+    figEast.addSecond(contourCircle3(p0Sx + p2Sx, p0Sy + p2Sy, R4));
+    figEast.addSecond(
+      ctrRectangle2(0, 0, RdSouth1, W42 + W47).rotate(0, 0, Ra).translate(p0Sx + p1Sx, p0Sy + p1Sy)
+    );
+    figEast.addSecond(ctrPlank4Splaced2(p0Sx + p1Sx + p4Sx, p0Sy + p1Sy + p4Sy));
+    const p0Nx = la + param.JaNorth - H32;
+    const p0Ny = D3H;
+    figEast.addSecond(contourCircle3(p0Nx, p0Ny, R4));
+    figEast.addSecond(contourCircle3(p0Nx + p2Nx, p0Ny + p2Ny, R4));
+    figEast.addSecond(
+      ctrRectangle2(0, -W42 - W47, RdNorth1, W42 + W47).rotate(0, 0, pi - RaNorth).translate(p0Nx + p1Nx, p0Ny + p1Ny)
+    );
+    figEast.addSecond(ctrPlank4Nplaced2(p0Nx + p1Nx + p4Nx, p0Ny + p1Ny + p4Ny));
+    figEast.addSecond(ctrPlank5aPlaced2(ptPl5x00, ptPl5y0));
+    figEast.addSecond(contourCircle3(ptPl5x00 + W52, ptPl5y0 - H32, R5));
+    figEast.addSecond(contourCircle3(ptPl5x00 + W52, ptPl5y0 + R5, R5));
+    figEast.addSecond(ctrPlank6c2(ptPl6x0, ptPl6y0 - param.dtQ));
+    figEast.addSecond(ctrRectangle2(ptPl6x0, ptPl6y0 - param.dtQ, param.W6, param.dtQ));
+    for (let ii = 0; ii < n7S; ii++) {
+      const ll = param.Q4Init + ii * step7;
+      const ipt = point(p0Sx + p3Sx, p0Sy + p3Sy).translatePolar(Ra, ll);
+      const iCtr = ctrRectangle2(0, 0, param.S4, param.H7).rotate(0, 0, Ra);
+      figEast.addSecond(iCtr.translate(ipt.cx, ipt.cy));
+    }
+    for (let ii = 0; ii < n7N; ii++) {
+      const aa = pi - RaNorth;
+      const ll = param.Q4Init + ii * step7;
+      const ipt = point(p0Nx + p3Nx, p0Ny + p3Ny).translatePolar(aa, ll);
+      const iCtr = ctrRectangle2(0, -param.H7, param.S4, param.H7).rotate(0, 0, aa);
+      figEast.addSecond(iCtr.translate(ipt.cx, ipt.cy));
+    }
+    figEast.addSecond(ctrPlank8Splaced2(ptPl5x00, ptPl5y0, Ra - pi2));
+    figEast.addSecond(ctrPlank8Nplaced2(ptPl5x00 + 2 * W52, ptPl5y0, pi2 - RaNorth));
+    const ctrPl1a = [ctrPlank1a2(0, 0, d3P1P1234)];
+    if (R3 > 0) {
+      ctrPl1a.push(contourCircle3(H12c + param.H3 / 2, W1a2, R3));
+      if (param.aSplit === 1 && d3P1P23) {
+        ctrPl1a.push(contourCircle3(H123c + param.H3s / 2, W1a2, R3));
+      }
+    }
+    figPlank1a.addMainOI(ctrPl1a);
+    if (R2 > 0) {
+      const D2H2 = D2H + param.H2;
+      figPlank1a.addSecond(ctrRectangle2(D2H - R2, -W2V1, 2 * R2, W1a2V1 + 2 * param.W2));
+      if (param.bSplit === 1) {
+        figPlank1a.addSecond(ctrRectangle2(D2H2 - R2, -W2V1, 2 * R2, W1a2V1 + 2 * param.W2));
+      }
+    }
+    figPlank1a.addSecond(ctrRectangle2(param.H1, -W2V1, param.H2, param.W2));
+    figPlank1a.addSecond(ctrRectangle2(param.H1, W1aV1, param.H2, param.W2));
+    if (param.bSplit === 1) {
+      figPlank1a.addSecond(ctrRectangle2(H1H2, -W2V1, param.H2, param.W2));
+      figPlank1a.addSecond(ctrRectangle2(H1H2, W1aV1, param.H2, param.W2));
+    }
+    const ctrPl1b = [
+      ctrPlank1b2(0, 0, param.d3Plank1West, param.d3Plank1East, d3P1P1234)
+    ];
+    if (R2 > 0) {
+      ctrPl1b.push(contourCircle3(D2H, W1b2, R2));
+      if (param.bSplit === 1) {
+        ctrPl1b.push(contourCircle3(D2H + param.H2, W1b2, R2));
+      }
+    }
+    figPlank1b.addMainOI(ctrPl1b);
+    if (R3 > 0) {
+      figPlank1b.addSecond(ctrRectangle2(D3H - R3, -W3U1, 2 * R3, W1b2U1 + 2 * param.W3));
+    }
+    figPlank1b.addSecond(ctrRectangle2(H12c, -W3U1, param.H3, param.W3));
+    figPlank1b.addSecond(ctrRectangle2(H12c, W1bU1, param.H3, param.W3));
+    const ctrPl2EE = [ctrPlank2EE2(0, 0)];
+    if (R2 > 0) {
+      for (let ii = 0; ii < param.Nb1; ii++) {
+        const ix = W1b2 + W3U1 + ii * stepX;
+        ctrPl2EE.push(contourCircle3(ix, H22, R2));
+      }
+    }
+    if (dbR > 0) {
+      for (let ii = 0; ii < param.Nb1 - 1; ii++) {
+        const ix = ii * stepX + W3U1 + param.W1b + pldbX;
+        ctrPl2EE.push(contourCircle3(ix, H22, dbR));
+      }
+      for (let ii = 1; ii < param.Nb1; ii++) {
+        const ix = W3U1 + ii * stepX - pldbX;
+        ctrPl2EE.push(contourCircle3(ix, H22, dbR));
+      }
+    }
+    figPlank2EE.addMainOI(ctrPl2EE);
+    figPlank2Slot.addMainO(ctrPlank2Slot2(0, 0));
+    const ctrPl2Slot = [ctrPlank2Slot2(0, 0)];
+    if (R2 > 0) {
+      for (let ii = 0; ii < 2; ii++) {
+        const ix = W1b2 + W3U1 + ii * stepX;
+        ctrPl2Slot.push(contourCircle3(ix, H22, R2));
+      }
+    }
+    if (dbR > 0) {
+      ctrPl2Slot.push(contourCircle3(W3U1 + param.W1b + pldbX, H22, dbR));
+      ctrPl2Slot.push(contourCircle3(W3U1 + stepX - pldbX, H22, dbR));
+    }
+    figPlank2Slot.addMainOI(ctrPl2Slot);
+    const ctrPl2Short = [ctrPlank2Short2(0, 0)];
+    if (R2 > 0) {
+      ctrPl2Short.push(contourCircle3(W1b2 + W3U1, H22, R2));
+    }
+    figPlank2Short.addMainOI(ctrPl2Short);
+    const ctrPl3EE = [ctrPlank3EE2(0, 0)];
+    if (R3 > 0) {
+      let ix = param.JaSouth + W1a2;
+      ctrPl3EE.push(contourCircle3(ix, H32, R3));
+      ix += pl3S1;
+      if (pl3S1 > 0) {
+        ctrPl3EE.push(contourCircle3(ix, H32, R3));
+      }
+      ix += param.La + param.W1a;
+      ctrPl3EE.push(contourCircle3(ix, H32, R3));
+      ix += pl3N1;
+      if (pl3N1 > 0) {
+        ctrPl3EE.push(contourCircle3(ix, H32, R3));
+      }
+    }
+    if (R4 > 0) {
+      ctrPl3EE.push(contourCircle3(H32, H32, R4));
+      ctrPl3EE.push(contourCircle3(pl3La - H32, H32, R4));
+    }
+    if (R5 > 0) {
+      const tx = param.JaSouth + param.W1a + laSouth;
+      ctrPl3EE.push(contourCircle3(tx, param.H3arc + H32, R5));
+    }
+    if (daR > 0) {
+      for (const [idx, ix] of aPos.entries()) {
+        const iix = param.JaSouth + ix;
+        if (idx < Na - 1) {
+          ctrPl3EE.push(contourCircle3(iix + param.W1a + pldaX, H32, daR));
+        }
+        if (idx > 0) {
+          ctrPl3EE.push(contourCircle3(iix - pldaX, H32, daR));
+        }
+      }
+    }
+    figPlank3EE.addMainOI(ctrPl3EE);
+    const ctrPl3S = [ctrPlank3S2(0, 0)];
+    if (R3 > 0) {
+      let ix = param.JaSouth + W1a2;
+      ctrPl3S.push(contourCircle3(ix, H32, R3));
+      ix += param.KaSouth + param.W1a;
+      ctrPl3S.push(contourCircle3(ix, H32, R3));
+    }
+    if (R4 > 0) {
+      ctrPl3S.push(contourCircle3(H32, H32, R4));
+    }
+    if (daR > 0) {
+      const xx0 = param.JaSouth + param.W1a;
+      ctrPl3S.push(contourCircle3(xx0 + pldaX, H32, daR));
+      ctrPl3S.push(contourCircle3(xx0 + param.KaSouth - pldaX, H32, daR));
+    }
+    figPlank3S.addMainOI(ctrPl3S);
+    const ctrPl3M = [ctrPlank3M2(0, 0)];
+    if (R3 > 0) {
+      let ix = W1a2 + W2V1;
+      ctrPl3M.push(contourCircle3(ix, H32, R3));
+      ix += param.La + param.W1a;
+      ctrPl3M.push(contourCircle3(ix, H32, R3));
+    }
+    if (R5 > 0) {
+      const tx = param.W2 + W1aV1 + laSouth - pl3S1;
+      ctrPl3M.push(contourCircle3(tx, param.H3arc + H32, R5));
+    }
+    if (daR > 0) {
+      const xx0 = W2V1 + param.W1a;
+      ctrPl3M.push(contourCircle3(xx0 + pldaX, H32, daR));
+      ctrPl3M.push(contourCircle3(xx0 + param.La - pldaX, H32, daR));
+    }
+    figPlank3M.addMainOI(ctrPl3M);
+    const ctrPl3N = [ctrPlank3N2(0, 0)];
+    if (R3 > 0) {
+      let ix = W1a2 + W2V1;
+      ctrPl3N.push(contourCircle3(ix, H32, R3));
+      ix += param.KaNorth + param.W1a;
+      ctrPl3N.push(contourCircle3(ix, H32, R3));
+    }
+    if (R4 > 0) {
+      ctrPl3N.push(contourCircle3(pl3N - H32, H32, R4));
+    }
+    if (daR > 0) {
+      const xx0 = W2V1 + param.W1a;
+      ctrPl3N.push(contourCircle3(xx0 + pldaX, H32, daR));
+      ctrPl3N.push(contourCircle3(xx0 + param.KaNorth - pldaX, H32, daR));
+    }
+    figPlank3N.addMainOI(ctrPl3N);
+    const ctrPl4S = [ctrPlank4S2(0, 0)];
+    if (R4 > 0) {
+      ctrPl4S.push(contourCircle3(param.ReS, W42, R4));
+      const tx = (H32 + R4) / Math.sin(Ra);
+      ctrPl4S.push(contourCircle3(param.ReS + tx, W42, R4));
+    }
+    figPlank4S.addMainOI(ctrPl4S);
+    const ctrPl4N = [ctrPlank4N2(0, 0)];
+    if (R4 > 0) {
+      ctrPl4N.push(contourCircle3(RdNorth1, W42, R4));
+      const tx = (H32 + R4) / Math.sin(RaNorth);
+      ctrPl4N.push(contourCircle3(RdNorth1 - tx, W42, R4));
+    }
+    figPlank4N.addMainOI(ctrPl4N);
+    const ctrPl5a = [ctrPlank5a2(0, 0)];
+    if (R5 > 0) {
+      const ix = l5l - (param.aSplit === 1 ? param.H3s : param.H3) / 2;
+      ctrPl5a.push(contourCircle3(ix, param.W5a / 2, R5));
+      ctrPl5a.push(contourCircle3(l5l + R5, param.W5a / 2, R5));
+    }
+    figPlank5a.addMainOI(ctrPl5a);
+    figPlank5b.addMainO(ctrPlank5b2(0, 0));
+    figPlank6b.addMainO(ctrPlank6b2(0, 0));
+    figPlank6c.addMainO(ctrPlank6c2(0, 0));
+    figPlank6c.addSecond(ctrRectangle2(0, 0, param.W6, param.dtQ));
+    figPlank8S.addMainO(ctrPlank8S2(0, 0));
+    figPlank8N.addMainO(ctrPlank8N2(0, 0));
+    figPlankDiagTop.addMainO(ctrPlankDiagTop2(0, 0, 1));
+    figPlankDiagA.addMainOI([
+      ctrPlankDiagA2(0, 0, 1),
+      contourCircle3(param.daE, param.daW / 2, daR)
+    ]);
+    figPlankDiagB.addMainOI([
+      ctrPlankDiagB2(0, 0, 1),
+      contourCircle3(param.dbE, param.dbW / 2, dbR)
+    ]);
+    rGeome.fig = {
+      faceEast: figEast,
+      faceBase: figBase,
+      faceSouth: figSouth,
+      facePlank1a: figPlank1a,
+      facePlank1b: figPlank1b,
+      facePlank2EE: figPlank2EE,
+      facePlank2Slot: figPlank2Slot,
+      facePlank2Short: figPlank2Short,
+      facePlank3EE: figPlank3EE,
+      facePlank3S: figPlank3S,
+      facePlank3M: figPlank3M,
+      facePlank3N: figPlank3N,
+      facePlank4S: figPlank4S,
+      facePlank4N: figPlank4N,
+      facePlank5a: figPlank5a,
+      facePlank5b: figPlank5b,
+      facePlank6b: figPlank6b,
+      facePlank6c: figPlank6c,
+      facePlank7c: figPlank7c,
+      facePlank8S: figPlank8S,
+      facePlank8N: figPlank8N,
+      facePlankDiagTop: figPlankDiagTop,
+      facePlankDiagA: figPlankDiagA,
+      facePlankDiagB: figPlankDiagB
+    };
+    const designName = rGeome.partName;
+    const exportList = [];
+    if (param.d3Plank1) {
+      exportList.push(`pax_${designName}_pl1`);
+    }
+    if (param.d3Plank2EE) {
+      exportList.push(`subpax_${designName}_pl2ee`);
+    }
+    if (param.d3Plank2Slot) {
+      exportList.push(`subpax_${designName}_pl2slot`);
+    }
+    if (param.d3Plank2short) {
+      exportList.push(`subpax_${designName}_pl2short`);
+    }
+    if (param.d3Plank3EE) {
+      exportList.push(`subpax_${designName}_pl3ee`);
+    }
+    if (param.d3Plank3S) {
+      exportList.push(`subpax_${designName}_pl3s`);
+    }
+    if (param.d3Plank3M) {
+      exportList.push(`subpax_${designName}_pl3m`);
+    }
+    if (param.d3Plank3N) {
+      exportList.push(`subpax_${designName}_pl3n`);
+    }
+    if (param.d3Plank4S) {
+      exportList.push(`subpax_${designName}_pl4s`);
+    }
+    if (param.d3Plank4N) {
+      exportList.push(`subpax_${designName}_pl4n`);
+    }
+    if (param.d3Plank5) {
+      exportList.push(`pax_${designName}_pl5`);
+    }
+    if (param.d3Plank6) {
+      exportList.push(`pax_${designName}_pl6`);
+    }
+    if (param.d3Plank7) {
+      exportList.push(`subpax_${designName}_pl7`);
+    }
+    if (param.d3Plank8S) {
+      exportList.push(`subpax_${designName}_pl8s`);
+    }
+    if (param.d3Plank8N) {
+      exportList.push(`subpax_${designName}_pl8n`);
+    }
+    if (param.d3PlankDiagTop) {
+      exportList.push(`subpax_${designName}_pldt`);
+    }
+    if (param.d3PlankDiagA) {
+      exportList.push(`subpax_${designName}_plda`);
+    }
+    if (param.d3PlankDiagB) {
+      exportList.push(`subpax_${designName}_pldb`);
+    }
+    if (param.d3Assembly) {
+      exportList.push(`pax_${designName}_assembly`);
+    }
+    rGeome.vol = {
+      extrudes: [
+        {
+          outName: `subpax_${designName}_pl1a`,
+          face: `${designName}_facePlank1a`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W1b,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl1b`,
+          face: `${designName}_facePlank1b`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W1a,
+          rotate: [pi2, 0, 0],
+          translate: [0, param.W1a, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl2ee`,
+          face: `${designName}_facePlank2EE`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W2,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl2slot`,
+          face: `${designName}_facePlank2Slot`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W2,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl2short`,
+          face: `${designName}_facePlank2Short`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W2,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl3ee`,
+          face: `${designName}_facePlank3EE`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W3,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl3s`,
+          face: `${designName}_facePlank3S`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W3,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl3m`,
+          face: `${designName}_facePlank3M`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W3,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl3n`,
+          face: `${designName}_facePlank3N`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W3,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl4s`,
+          face: `${designName}_facePlank4S`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl4W,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl4n`,
+          face: `${designName}_facePlank4N`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl4W,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl5a`,
+          face: `${designName}_facePlank5a`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl5aW,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl5b`,
+          face: `${designName}_facePlank5b`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl5bW,
+          rotate: [pi2, 0, 0],
+          translate: [0, pl5bW, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl6b`,
+          face: `${designName}_facePlank6b`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W6,
+          rotate: [pi2, 0, 0],
+          translate: [0, param.W6, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl6c`,
+          face: `${designName}_facePlank6c`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl6bL,
+          rotate: [pi2, 0, -pi2],
+          translate: [pl6bL, param.W6, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl7`,
+          face: `${designName}_facePlank7c`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl6bL,
+          rotate: [pi2, 0, 0],
+          translate: [0, pl6bL, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl8s`,
+          face: `${designName}_facePlank8S`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl4W,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pl8n`,
+          face: `${designName}_facePlank8N`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: pl4W,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pldt`,
+          face: `${designName}_facePlankDiagTop`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: param.W6,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_plda`,
+          face: `${designName}_facePlankDiagA`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: W1b2U1,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        },
+        {
+          outName: `subpax_${designName}_pldb`,
+          face: `${designName}_facePlankDiagB`,
+          extrudeMethod: EExtrude3.eLinearOrtho,
+          length: W1a2V1,
+          rotate: [0, 0, 0],
+          translate: [0, 0, 0]
+        }
+      ],
+      volumes: [
+        {
+          outName: `pax_${designName}_pl1`,
+          boolMethod: EBVolume3.eIntersection,
+          inList: [`subpax_${designName}_pl1a`, `subpax_${designName}_pl1b`]
+        },
+        {
+          outName: `pax_${designName}_pl5`,
+          boolMethod: EBVolume3.eIntersection,
+          inList: [`subpax_${designName}_pl5a`, `subpax_${designName}_pl5b`]
+        },
+        {
+          outName: `pax_${designName}_pl6`,
+          boolMethod: EBVolume3.eIntersection,
+          inList: [`subpax_${designName}_pl6b`, `subpax_${designName}_pl6c`]
+        },
+        {
+          outName: `pax_${designName}_assembly`,
+          boolMethod: EBVolume3.eUnion,
+          inList: [`pax_${designName}_pl1`, `pax_${designName}_pl6`]
+        },
+        {
+          outName: `pax_${designName}`,
+          boolMethod: EBVolume3.eUnion,
+          inList: exportList
+        }
+      ]
+    };
+    rGeome.sub = {};
+    rGeome.logstr += "abri drawn successfully!\n";
+    rGeome.calcErr = false;
+  } catch (emsg) {
+    rGeome.logstr += emsg;
+    console.log(emsg);
+  }
+  return rGeome;
+}
+var abriDef = {
+  pTitle: "abri",
+  pDescription: "A shelter made out of wood beam for supporting photovoltaic panels",
+  pDef: pDef3,
+  pGeom: pGeom3
+};
+
+// src/stone/stairs.ts
+import {
+  point as point2,
+  contour as contour4,
+  contourCircle as contourCircle4,
+  ctrRectangle as ctrRectangle3,
+  figure as figure4,
+  radToDeg as radToDeg2,
+  ffix as ffix3,
+  pNumber as pNumber4,
+  pDropdown as pDropdown2,
+  pSectionSeparator as pSectionSeparator4,
+  EExtrude as EExtrude4,
+  EBVolume as EBVolume4,
+  initGeom as initGeom4
+} from "geometrix";
+var pDef4 = {
   partName: "stairs",
   params: [
     //pNumber(name, unit, init, min, max, step)
-    pNumber3("Nn", "stair", 25, 1, 200, 1),
-    pNumber3("Nd", "stair", 20, 2, 200, 1),
-    pNumber3("D1", "mm", 5e3, 1e3, 5e4, 1),
-    pNumber3("Wi1", "mm", 1e3, 1, 1e4, 1),
-    pNumber3("We1", "mm", 1e3, 1, 1e4, 1),
-    pNumber3("Wi2", "mm", 2e3, 1, 1e4, 1),
-    pNumber3("We2", "mm", 2e3, 1, 1e4, 1),
-    pSectionSeparator3("Details"),
-    pDropdown("spiral", ["ExtInt", "Exterior", "Interior"]),
-    pDropdown("border", ["arc", "straight"]),
-    pNumber3("H1", "mm", 200, 10, 2e3, 1),
-    pNumber3("Wc", "mm", 200, 10, 2e3, 1),
-    pNumber3("Nc", "column", 6, 1, 100, 1)
+    pNumber4("Nn", "stair", 25, 1, 200, 1),
+    pNumber4("Nd", "stair", 20, 2, 200, 1),
+    pNumber4("D1", "mm", 5e3, 1e3, 5e4, 1),
+    pNumber4("Wi1", "mm", 1e3, 1, 1e4, 1),
+    pNumber4("We1", "mm", 1e3, 1, 1e4, 1),
+    pNumber4("Wi2", "mm", 2e3, 1, 1e4, 1),
+    pNumber4("We2", "mm", 2e3, 1, 1e4, 1),
+    pSectionSeparator4("Details"),
+    pDropdown2("spiral", ["ExtInt", "Exterior", "Interior"]),
+    pDropdown2("border", ["arc", "straight"]),
+    pNumber4("H1", "mm", 200, 10, 2e3, 1),
+    pNumber4("Wc", "mm", 200, 10, 2e3, 1),
+    pNumber4("Nc", "column", 6, 0, 100, 1)
   ],
   paramSvg: {
     Nn: "stairs_top.svg",
@@ -388,27 +1787,39 @@ var pDef3 = {
     // every 0.5 second
   }
 };
-function pGeom3(t, param, suffix = "") {
-  const rGeome = initGeom3(pDef3.partName + suffix);
-  const figTop = figure3();
-  const figTopColumn = figure3();
-  const figBorderI = figure3();
-  const figBorderE = figure3();
+function pGeom4(t, param, suffix = "") {
+  const rGeome = initGeom4(pDef4.partName + suffix);
+  const figTop = figure4();
+  const figTopColumn = figure4();
+  const figBorderI = figure4();
+  const figBorderE = figure4();
   rGeome.logstr += `${rGeome.partName} simTime: ${t}
 `;
   try {
-    let spiral2 = function(ir0, irr, ird, iwc, idx, iSign) {
-      const ab = idx * 2 * aStair2;
+    let ptSpiral2 = function(ird, idx, iSign) {
+      const rab = idx * 2 * aStair2;
       const cPi = iSign < 0 ? pi : 0;
-      const aa = ab + a0 + cPi;
+      const aa = rab + a0 + cPi;
+      const rpt = point2(ird, 0).rotate(p0, aa);
+      return [rpt, rab];
+    }, ctrPolygon2 = function(iN, ird, iSign) {
+      const [pp0] = ptSpiral2(ird, 0, iSign);
+      const rCtr = contour4(pp0.cx, pp0.cy);
+      for (let ii = 1; ii < iN; ii++) {
+        const [ppi] = ptSpiral2(ird, ii, iSign);
+        rCtr.addSegStrokeA(ppi.cx, ppi.cy);
+      }
+      rCtr.closeSegStroke();
+      return rCtr;
+    }, spiral2 = function(ir0, irr, ird, iwc, idx, iSign) {
+      const [pc, ab] = ptSpiral2(ird, idx, iSign);
       const rr = ir0 + iSign * (idx * irr - iwc);
-      const pc = point(ird, 0).rotate(p0, aa);
       const rp1 = pc.translatePolar(ab, rr);
       const rp2 = pc.translatePolar(ab + aStair2, rr);
       const rp3 = pc.translatePolar(ab + 2 * aStair2, rr);
       return [rp1, rp2, rp3];
     }, ctrStair2 = function(pi1, pi22, pi3, pe1, pe2, pe3) {
-      const rCtr = contour3(pe1.cx, pe1.cy);
+      const rCtr = contour4(pe1.cx, pe1.cy);
       if (param.border === 0) {
         rCtr.addPointA(pe2.cx, pe2.cy).addPointA(pe3.cx, pe3.cy).addSegArc2();
       } else {
@@ -422,8 +1833,13 @@ function pGeom3(t, param, suffix = "") {
       }
       rCtr.closeSegStroke();
       return rCtr;
+    }, ptColumn2 = function(ipI, ipE, iWc) {
+      const aa = Math.atan2(ipE.cy - ipI.cy, ipE.cx - ipI.cx);
+      const rpI = ipI.translatePolar(aa, iWc);
+      const rpE = ipE.translatePolar(aa + pi, iWc);
+      return [rpI, rpE];
     };
-    var spiral = spiral2, ctrStair = ctrStair2;
+    var ptSpiral = ptSpiral2, ctrPolygon = ctrPolygon2, spiral = spiral2, ctrStair = ctrStair2, ptColumn = ptColumn2;
     const pi = Math.PI;
     const pi2 = pi / 2;
     const R1 = param.D1 / 2;
@@ -432,9 +1848,10 @@ function pGeom3(t, param, suffix = "") {
     const aStair2 = pi / param.Nd;
     const Rid = Wid / (2 * Math.sin(aStair2));
     const Red = Wed / (2 * Math.sin(aStair2));
-    const p0 = point(0, 0);
+    const p0 = point2(0, 0);
     const a0 = pi2 + aStair2;
-    const columnNb = Math.floor(param.Nn / param.Nc);
+    const columnNb = param.Nc > 0 ? Math.floor(param.Nn / param.Nc) : 0;
+    const Nc = param.Nc > 0 ? param.Nc : 1;
     if (param.Wi2 < param.Wi1) {
       throw `err092: Wi2 ${param.Wi2} is too small compare to Wi1 ${param.Wi1}`;
     }
@@ -450,16 +1867,16 @@ function pGeom3(t, param, suffix = "") {
     if (param.We1 < param.Wc) {
       throw `err113: We1 ${param.We1} is too small compare to Wc ${param.Wc}`;
     }
-    rGeome.logstr += `Stair angle ${ffix2(radToDeg(2 * aStair2))} degree
+    rGeome.logstr += `Stair angle ${ffix3(radToDeg2(2 * aStair2))} degree
 `;
-    rGeome.logstr += `Stairs angle ${ffix2(param.Nn / param.Nd)} turn with ${columnNb} columns
+    rGeome.logstr += `Stairs angle ${ffix3(param.Nn / param.Nd)} turn with ${columnNb} columns
 `;
-    const ctrCircleRef = contourCircle3(0, 0, R1);
-    const ctrCircleSpiralI = contourCircle3(0, 0, Rid);
-    const ctrCircleSpiralE = contourCircle3(0, 0, Red);
+    const ctrCircleRef = contourCircle4(0, 0, R1);
+    const ctrPolygonI = ctrPolygon2(param.Nd, Rid, -1);
+    const ctrPolygonE = ctrPolygon2(param.Nd, Red, 1);
     figTop.addSecond(ctrCircleRef);
-    figTop.addSecond(ctrCircleSpiralI);
-    figTop.addSecond(ctrCircleSpiralE);
+    figTop.addSecond(ctrPolygonI);
+    figTop.addSecond(ctrPolygonE);
     const ctrListStair = [];
     for (let ii = 0; ii < param.Nn; ii++) {
       const wEI = ii * (Wed + Wid) + param.We1 + param.Wi1;
@@ -482,9 +1899,10 @@ function pGeom3(t, param, suffix = "") {
       const ii2 = (ii + 1) * param.Nc - 1;
       const wEI = ii2 * (Wed + Wid) + param.We1 + param.Wi1;
       let [pi1, pi22, pi3] = spiral2(R1 - param.Wi1, Wid, Rid, 0, ii2, -1);
-      let [pi4, pi5, pi6] = spiral2(R1 - param.Wi1, Wid, Rid, param.Wc, ii2, -1);
       let [pe1, pe2, pe3] = spiral2(R1 + param.We1, Wed, Red, 0, ii2, 1);
-      let [pe4, pe5, pe6] = spiral2(R1 + param.We1, Wed, Red, param.Wc, ii2, 1);
+      let [pi4, pe4] = ptColumn2(pi1, pe1, param.Wc);
+      let [pi5, pe5] = ptColumn2(pi22, pe2, param.Wc);
+      let [pi6, pe6] = ptColumn2(pi3, pe3, param.Wc);
       if (param.spiral === 1) {
         [pe4, pe5, pe6] = spiral2(R1 + param.We1, Wed, Red, param.Wc, ii2, 1);
         [pi1, pi22, pi3] = spiral2(R1 + param.We1, Wed, Red, wEI, ii2, 1);
@@ -509,9 +1927,9 @@ function pGeom3(t, param, suffix = "") {
     for (let ii = 0; ii < param.Nn; ii++) {
       const lStair = (R1 - param.Wi1 - ii * Wid) * 2 * aStair2;
       const yy = ii * param.H1;
-      figBorderI.addMainO(ctrRectangle2(xx, yy, lStair, param.H1));
-      if ((ii + 1) % param.Nc === 0 && yy > 0) {
-        figBorderI.addMainO(ctrRectangle2(xx, 0, lStair, yy));
+      figBorderI.addMainO(ctrRectangle3(xx, yy, lStair, param.H1));
+      if ((ii + 1) % Nc === 0 && yy > 0) {
+        figBorderI.addMainO(ctrRectangle3(xx, 0, lStair, yy));
         colHeight.push(yy);
       }
       xx += lStair;
@@ -521,9 +1939,9 @@ function pGeom3(t, param, suffix = "") {
     for (let ii = 0; ii < param.Nn; ii++) {
       const lStair = (R1 + param.We1 - ii * Wed) * 2 * aStair2;
       const yy = ii * param.H1;
-      figBorderE.addMainO(ctrRectangle2(xx, yy, lStair, param.H1));
-      if ((ii + 1) % param.Nc === 0 && yy > 0) {
-        figBorderE.addMainO(ctrRectangle2(xx, 0, lStair, yy));
+      figBorderE.addMainO(ctrRectangle3(xx, yy, lStair, param.H1));
+      if ((ii + 1) % Nc === 0 && yy > 0) {
+        figBorderE.addMainO(ctrRectangle3(xx, 0, lStair, yy));
       }
       xx += lStair;
     }
@@ -533,7 +1951,7 @@ function pGeom3(t, param, suffix = "") {
     const listVolName = [];
     const designName = rGeome.partName;
     for (const [idx, elem] of ctrListStair.entries()) {
-      const iFig = figure3();
+      const iFig = figure4();
       iFig.addMainO(elem);
       const iStr = `Stair${idx.toString().padStart(4, "0")}`;
       const iFace = `face${iStr}`;
@@ -541,7 +1959,7 @@ function pGeom3(t, param, suffix = "") {
       listVol.push({
         outName: `subpax_${designName}_${iStr}`,
         face: `${designName}_${iFace}`,
-        extrudeMethod: EExtrude3.eLinearOrtho,
+        extrudeMethod: EExtrude4.eLinearOrtho,
         length: param.H1,
         rotate: [0, 0, 0],
         translate: [0, 0, idx * param.H1]
@@ -549,7 +1967,7 @@ function pGeom3(t, param, suffix = "") {
       listVolName.push(`subpax_${designName}_${iStr}`);
     }
     for (const [idx, elem] of ctrListColumnI.entries()) {
-      const iFig = figure3();
+      const iFig = figure4();
       iFig.addMainO(elem);
       iFig.addMainO(ctrListColumnE[idx]);
       const iStr = `Col${idx.toString().padStart(4, "0")}`;
@@ -558,7 +1976,7 @@ function pGeom3(t, param, suffix = "") {
       listVol.push({
         outName: `subpax_${designName}_${iStr}`,
         face: `${designName}_${iFace}`,
-        extrudeMethod: EExtrude3.eLinearOrtho,
+        extrudeMethod: EExtrude4.eLinearOrtho,
         length: colHeight[idx],
         rotate: [0, 0, 0],
         translate: [0, 0, 0]
@@ -578,7 +1996,7 @@ function pGeom3(t, param, suffix = "") {
       volumes: [
         {
           outName: `pax_${designName}`,
-          boolMethod: EBVolume3.eUnion,
+          boolMethod: EBVolume4.eUnion,
           inList: listVolName
         }
       ]
@@ -595,10 +2013,11 @@ function pGeom3(t, param, suffix = "") {
 var stairsDef = {
   pTitle: "stairs",
   pDescription: "an helicoidal stairs",
-  pDef: pDef3,
-  pGeom: pGeom3
+  pDef: pDef4,
+  pGeom: pGeom4
 };
 export {
+  abriDef,
   catamaranDef,
   stairsDef,
   voilaDef