decocms 2.311.4 → 2.311.6

package/dist/server/node_modules/@embedded-postgres/linux-x64/native/lib/postgresql/pgxs/src/Makefile.global

@@ -1,1139 +0,0 @@
-# -*-makefile-*-
-# src/Makefile.global.in
-# src/Makefile.global.  Generated from Makefile.global.in by configure.
-
-#------------------------------------------------------------------------------
-# All PostgreSQL makefiles include this file and use the variables it sets,
-# which in turn are put here by the configure script. There is no need for
-# users to edit this file -- if it turns out to be necessary then that's a
-# bug.
-#
-# A makefile that includes this file needs to set the variable `subdir' to
-# the relative path from the top to itself and `top_builddir' to the relative
-# path from itself to the top before including this file. (The "top" is the
-# parent directory of the directory this file is in.)
-#------------------------------------------------------------------------------
-
-
-##########################################################################
-#
-# Meta configuration
-
-standard_targets = all install installdirs uninstall clean distclean coverage check checkprep installcheck init-po update-po
-# these targets should recurse even into subdirectories not being built:
-standard_always_targets = clean distclean
-
-.PHONY: $(standard_targets) maintainer-clean install-strip html man installcheck-parallel update-unicode
-
-# make `all' the default target
-all:
-
-# Delete target files if the command fails after it has
-# started to update the file.
-.DELETE_ON_ERROR:
-
-# Never delete any intermediate files automatically.
-.SECONDARY:
-
-maintainer-clean: distclean
-
-# PostgreSQL version number
-VERSION = 18.3
-MAJORVERSION = 18
-VERSION_NUM = 180003
-
-PACKAGE_URL = https://www.postgresql.org/
-
-# Set top_srcdir, srcdir, and VPATH.
-ifdef PGXS
-top_srcdir = $(top_builddir)
-
-# If VPATH is set or Makefile is not in current directory we are building
-# the extension with VPATH so we set the variable here.
-ifdef VPATH
-srcdir = $(VPATH)
-else
-ifeq ($(CURDIR),$(dir $(firstword $(MAKEFILE_LIST))))
-srcdir = .
-
-else
-srcdir = $(dir $(firstword $(MAKEFILE_LIST)))
-
-endif
-endif
-else # not PGXS
-vpath_build = no
-abs_top_builddir = /usr/src/postgresql
-abs_top_srcdir = /usr/src/postgresql
-
-ifneq ($(vpath_build),yes)
-top_srcdir = $(top_builddir)
-srcdir = .
-else # vpath_build = yes
-top_srcdir = $(abs_top_srcdir)
-srcdir = $(top_srcdir)/$(subdir)
-
-endif
-endif # not PGXS
-
-
-##########################################################################
-#
-# Installation directories
-#
-# These are set by the equivalent --xxxdir configure options.  We
-# append "postgresql" to some of them, if the string does not already
-# contain "pgsql" or "postgres", in order to avoid directory clutter.
-#
-# In a PGXS build, we cannot use the values inserted into Makefile.global
-# by configure, since the installation tree may have been relocated.
-# Instead get the path values from pg_config.  But users can specify
-# prefix explicitly, if they want to select their own installation
-# location.
-
-ifdef PGXS
-# Extension makefiles should set PG_CONFIG, but older ones might not
-ifndef PG_CONFIG
-PG_CONFIG = pg_config
-endif
-endif
-
-# This means: if ((not PGXS) or prefix)
-ifneq (,$(if $(PGXS),,1)$(prefix))
-
-# Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
-# makefiles may only use the derived variables such as bindir.
-
-prefix := /usr/local/pg-build
-exec_prefix := ${prefix}
-datarootdir := ${prefix}/share
-
-bindir := ${exec_prefix}/bin
-
-datadir := ${datarootdir}
-ifeq "$(findstring pgsql, $(datadir))" ""
-ifeq "$(findstring postgres, $(datadir))" ""
-override datadir := $(datadir)/postgresql
-endif
-endif
-
-sysconfdir := ${prefix}/etc
-ifeq "$(findstring pgsql, $(sysconfdir))" ""
-ifeq "$(findstring postgres, $(sysconfdir))" ""
-override sysconfdir := $(sysconfdir)/postgresql
-endif
-endif
-
-libdir := ${exec_prefix}/lib
-
-pkglibdir = $(libdir)
-ifeq "$(findstring pgsql, $(pkglibdir))" ""
-ifeq "$(findstring postgres, $(pkglibdir))" ""
-override pkglibdir := $(pkglibdir)/postgresql
-endif
-endif
-
-includedir := ${prefix}/include
-
-pkgincludedir = $(includedir)
-ifeq "$(findstring pgsql, $(pkgincludedir))" ""
-ifeq "$(findstring postgres, $(pkgincludedir))" ""
-override pkgincludedir := $(pkgincludedir)/postgresql
-endif
-endif
-
-mandir := ${datarootdir}/man
-
-docdir := ${datarootdir}/doc/${PACKAGE_TARNAME}
-ifeq "$(findstring pgsql, $(docdir))" ""
-ifeq "$(findstring postgres, $(docdir))" ""
-override docdir := $(docdir)/postgresql
-endif
-endif
-
-htmldir := ${docdir}
-
-localedir := ${datarootdir}/locale
-
-else # PGXS case
-
-bindir := $(shell $(PG_CONFIG) --bindir)
-datadir := $(shell $(PG_CONFIG) --sharedir)
-sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
-libdir := $(shell $(PG_CONFIG) --libdir)
-pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
-includedir := $(shell $(PG_CONFIG) --includedir)
-pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
-mandir := $(shell $(PG_CONFIG) --mandir)
-docdir := $(shell $(PG_CONFIG) --docdir)
-localedir := $(shell $(PG_CONFIG) --localedir)
-
-endif # PGXS
-
-# These derived path variables aren't separately configurable.
-
-includedir_server = $(pkgincludedir)/server
-includedir_internal = $(pkgincludedir)/internal
-pgxsdir = $(pkglibdir)/pgxs
-bitcodedir = $(pkglibdir)/bitcode
-
-
-##########################################################################
-#
-# Features
-#
-# Records the choice of the various --enable-xxx and --with-xxx options.
-
-with_icu	= yes
-with_perl	= yes
-with_python	= yes
-with_tcl	= yes
-with_ssl	= openssl
-with_readline	= no
-with_selinux	= no
-with_systemd	= no
-with_gssapi	= no
-with_krb_srvnam	= postgres
-with_ldap	= no
-with_libcurl	= no
-with_libnuma	= no
-with_liburing	= no
-with_libxml	= yes
-with_libxslt	= yes
-with_llvm	= no
-with_system_tzdata = 
-with_uuid	= ossp
-with_zlib	= yes
-enable_rpath	= yes
-enable_nls	= no
-enable_debug	= no
-enable_dtrace	= no
-enable_coverage	= no
-enable_injection_points = no
-enable_tap_tests	= no
-
-python_includespec	= -I/usr/include/python3.6m
-python_libdir		= /usr/lib/python3.6/config-3.6m-x86_64-linux-gnu
-python_libspec		= -L/usr/lib/python3.6/config-3.6m-x86_64-linux-gnu -lpython3.6m
-python_additional_libs	= -lpthread -ldl  -lutil -lm
-python_majorversion	= 3
-python_version		= 3.6
-
-krb_srvtab = 
-
-ICU_CFLAGS		= 
-ICU_LIBS		= -licui18n -licuuc -licudata
-
-LIBNUMA_CFLAGS		= 
-LIBNUMA_LIBS		= 
-
-LIBURING_CFLAGS		= 
-LIBURING_LIBS		= 
-
-TCLSH			= /usr/bin/tclsh
-TCL_LIBS		= -ldl -lz -lpthread -lm
-TCL_LIB_SPEC		= -L/usr/lib/x86_64-linux-gnu -ltcl8.6
-TCL_INCLUDE_SPEC	= -I/usr/include/tcl8.6
-TCL_SHARED_BUILD	= 1
-
-PTHREAD_CFLAGS		= -pthread -D_REENTRANT -D_THREAD_SAFE
-PTHREAD_LIBS		= 
-
-LLVM_BINPATH = 
-CLANG = 
-BITCODE_CFLAGS =  -O2 
-BITCODE_CXXFLAGS =  -O2 
-
-##########################################################################
-#
-# Programs and flags
-
-# Compilers
-
-CPP = gcc -E
-CPPFLAGS =  -D_GNU_SOURCE  -I/usr/include/libxml2
-PG_SYSROOT = 
-
-override CPPFLAGS += $(ICU_CFLAGS) $(LIBNUMA_CFLAGS) $(LIBURING_CFLAGS)
-
-ifdef PGXS
-override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
-else # not PGXS
-override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
-ifdef VPATH
-override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
-endif
-endif # not PGXS
-
-CC = gcc
-GCC = yes
-SUN_STUDIO_CC = no
-CXX = g++
-CFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Werror=vla -Wendif-labels -Wmissing-format-attribute -Wimplicit-fallthrough=3 -Wshadow=compatible-local -Wformat-security -fno-strict-aliasing -fwrapv -fexcess-precision=standard -Wno-format-truncation -Os -DMAP_HUGETLB=0x40000
-CFLAGS_SL = -fPIC
-# *_MODULE are for flags applied to extension libraries
-CFLAGS_SL_MODULE =  -fvisibility=hidden
-CXXFLAGS_SL_MODULE =  -fvisibility=hidden -fvisibility-inlines-hidden
-CFLAGS_UNROLL_LOOPS =  -funroll-loops
-CFLAGS_VECTORIZE =  -ftree-vectorize
-CFLAGS_CRC = 
-PERMIT_DECLARATION_AFTER_STATEMENT = -Wno-declaration-after-statement
-PERMIT_MISSING_VARIABLE_DECLARATIONS = 
-CXXFLAGS = -Wall -Wpointer-arith -Wendif-labels -Wmissing-format-attribute -Wimplicit-fallthrough=3 -Wshadow=compatible-local -Wformat-security -fno-strict-aliasing -fwrapv -O2
-
-LLVM_CPPFLAGS = 
-LLVM_CFLAGS = 
-LLVM_CXXFLAGS = 
-
-# Kind-of compilers
-
-BISON = /usr/bin/bison
-BISONFLAGS =  -Wno-deprecated $(YFLAGS)
-FLEX = /usr/bin/flex
-FLEXFLAGS =  $(LFLAGS)
-DTRACE = 
-DTRACEFLAGS = 
-ZIC = 
-
-# Linking
-
-AR = ar
-AROPT = crs
-LIBS = -lxslt -lxml2 -lssl -lcrypto -lz -lpthread -lrt -ldl -lm 
-LDAP_LIBS_FE = 
-LDAP_LIBS_BE = 
-UUID_LIBS = -lossp-uuid
-LLVM_LIBS=
-
-# It's critical that within LDFLAGS, all -L switches pointing to build-tree
-# directories come before any -L switches pointing to external directories.
-# Otherwise it's possible for, e.g., a platform-provided copy of libpq.so
-# to get linked in place of the one we've built.  Therefore we adopt the
-# convention that the first component of LDFLAGS is an extra variable
-# LDFLAGS_INTERNAL, and -L and -l switches for PG's own libraries must be
-# put into LDFLAGS_INTERNAL, so they will appear ahead of those for external
-# libraries.
-#
-# We need LDFLAGS and LDFLAGS_INTERNAL to be "recursively expanded" variables,
-# else adjustments to, e.g., rpathdir don't work right.  So we must NOT do
-# "LDFLAGS := something" anywhere, ditto for LDFLAGS_INTERNAL.
-# These initial assignments must be "=" type, and elsewhere we must only do
-# "LDFLAGS += something" or "LDFLAGS_INTERNAL += something".
-ifdef PGXS
-  LDFLAGS_INTERNAL = -L$(libdir)
-else
-  LDFLAGS_INTERNAL = -L$(top_builddir)/src/port -L$(top_builddir)/src/common
-endif
-LDFLAGS = $(LDFLAGS_INTERNAL)   -Wl,--as-needed
-
-LDFLAGS_EX = 
-LDFLAGS_EX_BE =  -Wl,--export-dynamic
-# LDFLAGS_SL might have already been assigned by calling makefile
-LDFLAGS_SL += 
-WINDRES = 
-X = 
-
-# Perl
-
-# quoted to protect pathname with spaces
-PERL		= '/usr/bin/perl'
-perl_archlibexp		= /usr/lib/x86_64-linux-gnu/perl/5.26
-perl_privlibexp		= /usr/share/perl/5.26
-perl_includespec	= -I/usr/lib/x86_64-linux-gnu/perl/5.26/CORE
-perl_embed_ccflags	= -DDEBIAN 
-perl_embed_ldflags	=   -L/usr/lib/x86_64-linux-gnu/perl/5.26/CORE -lperl -ldl -lm -lpthread -lc -lcrypt
-
-# Miscellaneous
-
-AWK	= mawk
-LN_S	= ln -s
-LIBCURL_CPPFLAGS = 
-LIBCURL_LDFLAGS = 
-LIBCURL_LDLIBS = 
-MSGFMT  = 
-MSGFMT_FLAGS = 
-MSGMERGE = 
-OPENSSL	= /usr/bin/openssl
-PYTHON	= /usr/bin/python3
-TAR	= /bin/tar
-XGETTEXT = 
-
-GZIP	= gzip
-BZIP2	= bzip2
-LZ4	= 
-ZSTD	= 
-
-DOWNLOAD = wget -O $@ --no-use-server-timestamps
-#DOWNLOAD = curl -o $@
-
-
-# Unicode data information
-
-# Before each major release, update these and run make update-unicode.
-
-# Pick a release from here: <https://www.unicode.org/Public/>.  Note
-# that the most recent release listed there is often a pre-release;
-# don't pick that one, except for testing.
-UNICODE_VERSION = 16.0.0
-
-# Pick a release from here: <http://cldr.unicode.org/index/downloads>
-CLDR_VERSION = 47
-
-
-# Tree-wide build support
-
-# Just about every code subdirectory wants to have the generated headers
-# available before building, but we don't want parallel makes all trying
-# to build the same headers.  These rules, together with the recursion rules
-# below, ensure that we update the generated headers once, if needed,
-# at the top level of any "make all/install/check/installcheck" request.
-# If a particular subdirectory knows this isn't needed in itself or its
-# children, it can set NO_GENERATED_HEADERS.
-
-all install check installcheck: submake-generated-headers
-
-.PHONY: submake-generated-headers
-
-submake-generated-headers:
-ifndef NO_GENERATED_HEADERS
-ifeq ($(MAKELEVEL),0)
-	$(MAKE) -C $(top_builddir)/src/backend generated-headers
-endif
-endif
-
-
-# Testing
-
-# In much the same way as above, these rules ensure that we build a temp
-# install tree just once in any recursive "make check".  The additional test
-# on abs_top_builddir prevents doing anything foolish to the root directory.
-
-check: temp-install
-
-.PHONY: temp-install
-
-
-# prepend to path if already set, else just set it
-define add_to_path
-$(1)="$(if $($(1)),$(2):$$$(1),$(2))"
-endef
-
-# platform-specific environment variable to set shared library path
-# individual ports can override this later, this is the default name
-ld_library_path_var = LD_LIBRARY_PATH
-
-# with_temp_install_extra is for individual ports to define if they
-# need something more here. If not defined then the expansion does
-# nothing.
-with_temp_install = \
-	PATH="$(abs_top_builddir)/tmp_install$(bindir):$(CURDIR):$$PATH" \
-	$(call add_to_path,$(strip $(ld_library_path_var)),$(abs_top_builddir)/tmp_install$(libdir)) \
-	INITDB_TEMPLATE='$(abs_top_builddir)'/tmp_install/initdb-template \
-	$(with_temp_install_extra)
-
-temp-install: | submake-generated-headers
-ifndef NO_TEMP_INSTALL
-ifneq ($(abs_top_builddir),)
-ifeq ($(MAKELEVEL),0)
-	rm -rf '$(abs_top_builddir)'/tmp_install
-	$(MKDIR_P) '$(abs_top_builddir)'/tmp_install/log
-	$(MAKE) -C '$(top_builddir)' DESTDIR='$(abs_top_builddir)'/tmp_install install >'$(abs_top_builddir)'/tmp_install/log/install.log 2>&1
-	$(MAKE) -j1 $(if $(CHECKPREP_TOP),-C $(CHECKPREP_TOP),) checkprep >>'$(abs_top_builddir)'/tmp_install/log/install.log 2>&1
-
-	$(with_temp_install) initdb --auth trust --no-sync --no-instructions --lc-messages=C --no-clean '$(abs_top_builddir)'/tmp_install/initdb-template >>'$(abs_top_builddir)'/tmp_install/log/initdb-template.log 2>&1
-endif
-endif
-endif
-
-# Tasks to run serially at the end of temp-install.  Some EXTRA_INSTALL
-# entries appear more than once in the tree, and parallel installs of the same
-# file can fail with EEXIST.
-checkprep:
-	$(if $(EXTRA_INSTALL),for extra in $(EXTRA_INSTALL); do $(MAKE) -C '$(top_builddir)'/$$extra DESTDIR='$(abs_top_builddir)'/tmp_install install || exit; done)
-
-PROVE = 
-# There are common routines in src/test/perl, and some test suites have
-# extra perl modules in their own directory.
-PG_PROVE_FLAGS = -I $(top_srcdir)/src/test/perl/ -I $(srcdir)
-# User-supplied prove flags such as --verbose can be provided in PROVE_FLAGS.
-PROVE_FLAGS =
-
-ifeq ($(enable_tap_tests),yes)
-
-ifndef PGXS
-define prove_installcheck
-echo "# +++ tap install-check in $(subdir) +++" && \
-rm -rf '$(CURDIR)'/tmp_check && \
-$(MKDIR_P) '$(CURDIR)'/tmp_check && \
-cd $(srcdir) && \
-   TESTLOGDIR='$(CURDIR)/tmp_check/log' \
-   TESTDATADIR='$(CURDIR)/tmp_check' \
-   PATH="$(bindir):$(CURDIR):$$PATH" \
-   PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \
-   PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
-   share_contrib_dir='$(DESTDIR)$(datadir)/$(datamoduledir)' \
-   $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
-endef
-else # PGXS case
-define prove_installcheck
-echo "# +++ tap install-check in $(subdir) +++" && \
-rm -rf '$(CURDIR)'/tmp_check && \
-$(MKDIR_P) '$(CURDIR)'/tmp_check && \
-cd $(srcdir) && \
-   TESTLOGDIR='$(CURDIR)/tmp_check/log' \
-   TESTDATADIR='$(CURDIR)/tmp_check' \
-   PATH="$(bindir):$(CURDIR):$$PATH" \
-   PGPORT='6$(DEF_PGPORT)' \
-   PG_REGRESS='$(top_builddir)/src/test/regress/pg_regress' \
-   $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
-endef
-endif # PGXS
-
-define prove_check
-echo "# +++ tap check in $(subdir) +++" && \
-rm -rf '$(CURDIR)'/tmp_check && \
-$(MKDIR_P) '$(CURDIR)'/tmp_check && \
-cd $(srcdir) && \
-   TESTLOGDIR='$(CURDIR)/tmp_check/log' \
-   TESTDATADIR='$(CURDIR)/tmp_check' \
-   $(with_temp_install) \
-   PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \
-   PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
-   share_contrib_dir='$(abs_top_builddir)/tmp_install$(datadir)/$(datamoduledir)' \
-   $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
-endef
-
-else
-prove_installcheck = @echo "TAP tests not enabled. Try configuring with --enable-tap-tests"
-prove_check = $(prove_installcheck)
-endif
-
-# Installation.
-
-install_bin = /usr/bin/install -c
-install_sh = $(SHELL) $(top_srcdir)/config/install-sh -c
-INSTALL = $(if $(use_install_sh),$(install_sh),$(if $(install_bin),$(install_bin),$(install_sh)))
-
-INSTALL_SCRIPT_MODE	= 755
-INSTALL_DATA_MODE	= 644
-INSTALL_PROGRAM	= $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
-INSTALL_SCRIPT	= $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
-INSTALL_DATA	= $(INSTALL) -m $(INSTALL_DATA_MODE)
-INSTALL_STLIB	= $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
-INSTALL_SHLIB	= $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
-# Override in Makefile.port if necessary
-INSTALL_SHLIB_OPTS = -m 755
-
-MKDIR_P = /bin/mkdir -p
-
-missing		= $(SHELL) $(top_srcdir)/config/missing
-
-STRIP		= strip
-STRIP_STATIC_LIB = strip --strip-unneeded
-STRIP_SHARED_LIB = strip --strip-unneeded
-
-# Documentation
-
-DBTOEPUB	= 
-FOP				= 
-XMLLINT			= 
-XSLTPROC		= 
-
-# Code coverage
-
-GCOV = 
-LCOV = 
-GENHTML = 
-
-# Feature settings
-
-DEF_PGPORT = 5432
-WANTED_LANGUAGES = 
-
-
-##########################################################################
-#
-# Additional platform-specific settings
-#
-
-# Name of the "template"
-PORTNAME= linux
-
-build_os = linux-gnu
-
-host_tuple = x86_64-pc-linux-gnu
-host_os = linux-gnu
-host_cpu = x86_64
-
-# Backend stack size limit has to be hard-wired on Windows (it's in bytes)
-WIN32_STACK_RLIMIT=4194304
-
-DLSUFFIX = .so
-
-# Pull in platform-specific magic
-include $(top_builddir)/src/Makefile.port
-
-# Set up rpath if enabled.  By default it will point to our libdir,
-# but individual Makefiles can force other rpath paths if needed.
-rpathdir = $(libdir)
-
-ifeq ($(enable_rpath), yes)
-LDFLAGS += $(rpath)
-endif
-
-# Show the DLSUFFIX to build scripts (e.g. buildfarm)
-.PHONY: show_dl_suffix
-show_dl_suffix:
-	@echo $(DLSUFFIX)
-
-
-##########################################################################
-#
-# Some variables needed to find some client interfaces
-
-ifdef PGXS
-# some contribs assumes headers and libs are in the source tree...
-libpq_srcdir = $(includedir)
-libpq_builddir = $(libdir)
-else
-libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
-libpq_builddir = $(top_builddir)/src/interfaces/libpq
-endif
-
-# How to link to libpq.  (This macro may be used as-is by backend extensions.
-# Client-side code should go through libpq_pgport or libpq_pgport_shlib,
-# instead.)
-libpq = -L$(libpq_builddir) -lpq
-
-# libpq_pgport is for use by client executables (not libraries) that use libpq.
-# We used to use this to force libpgport and libpgcommon to be linked before
-# libpq, ensuring that clients would pull symbols from those libraries rather
-# than possibly getting them from libpq (and thereby having an unwanted
-# dependency on which symbols libpq uses).  However, now that we can prevent
-# libpq from exporting those symbols on all platforms of interest, we don't
-# worry about that anymore.  The previous technique resulted in duplicate
-# libraries in link commands, since those libraries also appear in $(LIBS).
-# Some platforms warn about that, so avoiding those warnings is now more
-# important.  Hence, $(libpq_pgport) is now equivalent to $(libpq), but we
-# still recommend using it for client executables in case some other reason
-# appears to handle them differently.
-libpq_pgport = $(libpq)
-
-# libpq_pgport_shlib is the same idea, but for use in client shared libraries.
-# We need those clients to use the shlib variants.  (Ideally, users of this
-# macro would strip libpgport and libpgcommon from $(LIBS), but no harm is
-# done if they don't, since they will have satisfied all their references
-# from these libraries.)
-ifdef PGXS
-libpq_pgport_shlib = -L$(libdir) -lpgcommon_shlib -lpgport_shlib $(libpq)
-else
-libpq_pgport_shlib = -L$(top_builddir)/src/common -lpgcommon_shlib -L$(top_builddir)/src/port -lpgport_shlib $(libpq)
-endif
-
-# Cygwin seems to need ldap libraries to be mentioned here, too
-ifeq ($(PORTNAME),cygwin)
-libpq_pgport += $(LDAP_LIBS_FE)
-endif
-
-
-##########################################################################
-#
-# Commonly used submake targets
-
-submake-libpq: | submake-generated-headers
-	$(MAKE) -C $(libpq_builddir) all
-
-submake-libpgport: | submake-generated-headers
-	$(MAKE) -C $(top_builddir)/src/port all
-	$(MAKE) -C $(top_builddir)/src/common all
-
-submake-libpgfeutils: | submake-generated-headers
-	$(MAKE) -C $(top_builddir)/src/port all
-	$(MAKE) -C $(top_builddir)/src/common all
-	$(MAKE) -C $(top_builddir)/src/fe_utils all
-
-.PHONY: submake-libpq submake-libpgport submake-libpgfeutils
-
-
-##########################################################################
-#
-# Testing support
-
-# Store any configure-time setting for PG_TEST_EXTRA, but let environment
-# variables override it to maintain the historical behavior of the tests.
-# (Standard `=` assignment would require devs to use a commandline option.)
-# This is skipped in PGXS mode to keep the setting from escaping into other
-# projects' builds.
-ifndef PGXS
-PG_TEST_EXTRA ?= 
-export PG_TEST_EXTRA
-endif
-
-ifneq ($(USE_MODULE_DB),)
-  PL_TESTDB = pl_regression_$(NAME)
-  ifneq ($(MODULE_big),)
-    CONTRIB_TESTDB=contrib_regression_$(MODULE_big)
-    ISOLATION_TESTDB=isolation_regression_$(MODULE_big)
-  else
-    ifneq ($(MODULES),)
-      CONTRIB_TESTDB=contrib_regression_$(word 1,$(MODULES))
-      ISOLATION_TESTDB=isolation_regression_$(word 1,$(MODULES))
-    else
-      CONTRIB_TESTDB=contrib_regression_$(word 1,$(REGRESS))
-      ISOLATION_TESTDB=isolation_regression_$(word 1,$(ISOLATION))
-    endif
-  endif
-else
-  PL_TESTDB = pl_regression
-  CONTRIB_TESTDB = contrib_regression
-  ISOLATION_TESTDB = isolation_regression
-endif
-
-ifdef NO_LOCALE
-NOLOCALE += --no-locale
-endif
-
-# file with extra config for temp build
-TEMP_CONF =
-ifdef TEMP_CONFIG
-TEMP_CONF += --temp-config=$(TEMP_CONFIG)
-endif
-
-pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
-pg_regress_clean_files = results/ regression.diffs regression.out tmp_check/ tmp_check_iso/ log/ output_iso/
-
-pg_regress_check = \
-    echo "\# +++ regress check in $(subdir) +++" && \
-    $(with_temp_install) \
-    $(top_builddir)/src/test/regress/pg_regress \
-    --temp-instance=./tmp_check \
-    --inputdir=$(srcdir) \
-    --bindir= \
-    $(TEMP_CONF) \
-    $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
-pg_regress_installcheck = \
-    echo "\# +++ regress install-check in $(subdir) +++" && \
-    $(top_builddir)/src/test/regress/pg_regress \
-    --inputdir=$(srcdir) \
-    --bindir='$(bindir)' \
-    $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
-
-pg_isolation_regress_check = \
-    echo "\# +++ isolation check in $(subdir) +++" && \
-    $(with_temp_install) \
-    $(top_builddir)/src/test/isolation/pg_isolation_regress \
-    --temp-instance=./tmp_check_iso \
-    --inputdir=$(srcdir) --outputdir=output_iso \
-    --bindir= \
-    $(TEMP_CONF) \
-    $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
-pg_isolation_regress_installcheck = \
-    echo "\# +++ isolation install-check in $(subdir) +++" && \
-    $(top_builddir)/src/test/isolation/pg_isolation_regress \
-    --inputdir=$(srcdir) --outputdir=output_iso \
-    --bindir='$(bindir)' \
-    $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
-
-##########################################################################
-#
-# Customization
-#
-# This includes your local customizations if Makefile.custom exists
-# in the source directory.  This file doesn't exist in the original
-# distribution so that it doesn't get overwritten when you upgrade.
-#
-# NOTE:  Makefile.custom is from the pre-Autoconf days of PostgreSQL.
-# You are liable to shoot yourself in the foot if you use it without
-# knowing exactly what you're doing.  The preferred (and more
-# reliable) method is to communicate what you want to do to the
-# configure script, and leave the makefiles alone.
-
--include $(top_srcdir)/src/Makefile.custom
-
-ifneq ($(CUSTOM_INSTALL),)
-INSTALL= $(CUSTOM_INSTALL)
-endif
-
-ifneq ($(CUSTOM_CC),)
-  CC= $(CUSTOM_CC)
-endif
-
-ifneq ($(CUSTOM_COPT),)
-  COPT= $(CUSTOM_COPT)
-endif
-
-#
-# These variables are meant to be set in the environment of "make"
-# to add flags to whatever configure picked.  Unlike the ones above,
-# they are documented.
-#
-ifdef COPT
-   CFLAGS += $(COPT)
-   CXXFLAGS += $(COPT)
-   LDFLAGS += $(COPT)
-endif
-
-ifdef PROFILE
-   CFLAGS += $(PROFILE)
-   LDFLAGS += $(PROFILE)
-endif
-
-
-##########################################################################
-#
-# substitute implementations of C library routines (see src/port/)
-# note we already included -L.../src/port in LDFLAGS above
-
-LIBOBJS =  ${LIBOBJDIR}getpeereid$U.o ${LIBOBJDIR}strlcat$U.o ${LIBOBJDIR}strlcpy$U.o ${LIBOBJDIR}timingsafe_bcmp$U.o
-
-# files needed for the chosen CRC-32C implementation
-PG_CRC32C_OBJS = pg_crc32c_sse42.o pg_crc32c_sb8.o pg_crc32c_sse42_choose.o
-
-LIBS := -lpgcommon -lpgport $(LIBS)
-
-# to make ws2_32.lib the last library
-ifeq ($(PORTNAME),win32)
-LIBS += -lws2_32
-endif
-
-# Not really standard libc functions, used by the backend.
-TAS         = 
-
-
-##########################################################################
-#
-# Global targets and rules
-
-%.c: %.l
-	$(FLEX) $(if $(FLEX_NO_BACKUP),-b) $(FLEXFLAGS) -o'$@' $<
-	@$(if $(FLEX_NO_BACKUP),if [ `wc -l <lex.backup` -eq 1 ]; then rm lex.backup; else echo "Scanner requires backup; see lex.backup." 1>&2; exit 1; fi)
-
-%.c: %.y
-	$(if $(BISON_CHECK_CMD),$(BISON_CHECK_CMD))
-	$(BISON) $(BISONFLAGS) -o $@ $<
-
-%.i: %.c
-	$(CPP) $(CPPFLAGS) -o $@ $<
-
-%.gz: %
-	$(GZIP) --best -c $< >$@
-
-%.bz2: %
-	$(BZIP2) -c $< >$@
-
-# Direct builds of foo.c -> foo are disabled to avoid generating
-# *.dSYM junk on Macs.  All builds should normally go through the
-# foo.c -> foo.o -> foo steps.  This also ensures that dependency
-# tracking (see below) is used.
-%: %.c
-
-# Replace gmake's default rule for linking a single .o file to produce an
-# executable.  The main point here is to put LDFLAGS after the .o file,
-# since we put -l switches into LDFLAGS and those are order-sensitive.
-# In addition, include CFLAGS and LDFLAGS_EX per project conventions.
-%: %.o
-	$(CC) $(CFLAGS) $^ $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o $@$(X)
-
-ifndef PGXS
-
-# Remake Makefile.global from Makefile.global.in if the latter
-# changed. In order to trigger this rule, the including file must
-# write `include $(top_builddir)/src/Makefile.global', not some
-# shortcut thereof.
-$(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
-	cd $(top_builddir) && ./config.status src/Makefile.global
-
-# Remake pg_config.h from pg_config.h.in if the latter changed.
-# config.status will not change the timestamp on pg_config.h if it
-# doesn't change, so as to avoid recompiling the entire tree
-# unnecessarily. Therefore we make config.status update a timestamp file
-# stamp-h every time it runs, so that we don't trigger this rule every time.
-# (We do trigger the null rule for stamp-h to pg_config.h every time; so it's
-# important for that rule to be empty!)
-#
-# Of course you need to turn on dependency tracking to get any
-# dependencies on pg_config.h.
-$(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h ;
-
-$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) && ./config.status src/include/pg_config.h
-
-# Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
-# logic as above.
-$(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h ;
-
- $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
-
-# When configure changes, rerun configure with the same options as
-# last time. To change configure, you need to run autoconf manually.
-$(top_builddir)/config.status: $(top_srcdir)/configure
-	cd $(top_builddir) && ./config.status --recheck
-
-endif # not PGXS
-
-
-install-strip:
-# install-strip always uses install-sh, so that strip options can be
-# passed.
-	$(MAKE) use_install_sh=yes \
-	    INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
-	    INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
-	    INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
-	    INSTALL_STRIP_FLAG=-s \
-	    install
-
-
-##########################################################################
-#
-# Recursive make support
-# ----------------------
-# Instead of recursing through subdirectories with a for loop or
-# repeated $(MAKE) -C whatever calls, this is a little smarter: it
-# allows parallel make across directories and lets make -k and -q work
-# correctly.
-
-# We need the ability to export target-specific variables, which was
-# added in GNU make 3.81.  That also happens to be the version
-# where the .FEATURES variable was introduced, so this is a simple check.
-ifndef .FEATURES
-$(error GNU make 3.81 or newer is required.  You are using version $(MAKE_VERSION))
-endif
-
-# This function is only for internal use below.  It should be called
-# using $(eval).  It will set up a target so that it recurses into a
-# given subdirectory.  For the tree-wide all/install/check/installcheck cases,
-# ensure we do our one-time tasks before recursing (see targets above).
-# Note that to avoid a nasty bug in make 3.80,
-# this function was written to not use any complicated constructs (like
-# multiple targets on a line) and also not contain any lines that expand
-# to more than about 200 bytes.  This is why we make it apply to just one
-# subdirectory at a time, rather than to a list of subdirectories.
-# $1: target name, e.g., all
-# $2: subdir name
-# $3: target to run in subdir, usually same as $1
-define _create_recursive_target
-.PHONY: $(1)-$(2)-recurse
-$(1): $(1)-$(2)-recurse
-$(1)-$(2)-recurse: $(if $(filter all install check installcheck, $(3)), submake-generated-headers) $(if $(filter check, $(3)), temp-install)
-	$$(MAKE) -C $(2) $(3)
-endef
-# Note that the use of $$ on the last line above is important; we want
-# $(MAKE) to be evaluated when the rule is run, not when the $(eval) is run
-# to create the rule.  This is necessary to get make -q working.
-
-# Call this function in a makefile that needs to recurse into subdirectories.
-# In the normal case all arguments can be defaulted.
-# $1: targets to make recursive (defaults to list of standard targets)
-# $2: list of subdirs (defaults to SUBDIRS variable)
-# $3: target to run in subdir (defaults to current element of $1)
-recurse = $(foreach target,$(if $1,$1,$(standard_targets)),$(foreach subdir,$(if $2,$2,$(SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
-
-# If a makefile's list of SUBDIRS varies depending on configuration, then
-# any subdirectories excluded from SUBDIRS should instead be added to
-# ALWAYS_SUBDIRS, and then it must call recurse_always as well as recurse.
-# This ensures that distclean, etc will apply to all subdirectories.
-# In the normal case all arguments will be defaulted.
-# $1: targets to make recursive (defaults to standard_always_targets)
-# $2: list of subdirs (defaults to ALWAYS_SUBDIRS variable)
-# $3: target to run in subdir (defaults to current element of $1)
-recurse_always = $(foreach target,$(if $1,$1,$(standard_always_targets)),$(foreach subdir,$(if $2,$2,$(ALWAYS_SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
-
-
-##########################################################################
-#
-# Automatic dependency generation
-# -------------------------------
-# When we configure with --enable-depend then we override the default
-# compilation rule with the magic below. While or after creating the
-# actual output file we also create a dependency list for the .c file.
-# Next time we invoke make we will have top-notch information about
-# whether this file needs to be updated. The dependency files are kept
-# in the .deps subdirectory of each directory.
-
-autodepend = 
-
-ifeq ($(autodepend), yes)
-
-ifndef COMPILE.c
-COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
-endif
-
-ifndef COMPILE.cc
-COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
-endif
-
-DEPDIR = .deps
-
-ifeq ($(GCC), yes)
-
-# GCC allows us to create object and dependency file in one invocation.
-%.o : %.c
-	@if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
-	$(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
-
-%.o : %.cpp
-	@if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
-	$(COMPILE.cc) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
-
-endif # GCC
-
-# Include all the dependency files generated for the current
-# directory. Note that make would complain if include was called with
-# no arguments.
-Po_files := $(wildcard $(DEPDIR)/*.Po)
-ifneq (,$(Po_files))
-include $(Po_files)
-endif
-
-# hook for clean-up
-clean distclean: clean-deps
-
-.PHONY: clean-deps
-clean-deps:
-	@rm -rf $(DEPDIR)
-
-endif # autodepend
-
-
-##########################################################################
-#
-# Native language support
-
-ifeq ($(enable_nls), yes)
-ifneq (,$(wildcard $(srcdir)/nls.mk))
-
-include $(top_srcdir)/src/nls-global.mk
-
-endif # nls.mk
-endif # enable_nls
-
-
-##########################################################################
-#
-# Coverage
-
-# Explanation of involved files:
-#   foo.c	source file
-#   foo.o	object file
-#   foo.gcno	gcov graph (a.k.a. "notes") file, created at compile time
-#		(by gcc -ftest-coverage)
-#   foo.gcda	gcov data file, created when the program is run (for
-#		programs compiled with gcc -fprofile-arcs)
-#   foo.c.gcov	gcov output file with coverage information, created by
-#		gcov from foo.gcda (by "make coverage")
-#   foo.c.gcov.out  stdout captured when foo.c.gcov is created, mildly
-#		interesting
-#   lcov_test.info
-#		lcov tracefile, built from gcda files in one directory,
-#		later collected by "make coverage-html"
-#   lcov_base.info
-#		tracefile for zero counters for every file, so that
-#		even files that are not touched by tests are counted
-#		for the overall coverage rate
-
-ifeq ($(enable_coverage), yes)
-
-# make coverage -- text output
-
-local_gcda_files = $(wildcard *.gcda)
-
-coverage: $(local_gcda_files:.gcda=.c.gcov)
-
-%.c.gcov: %.gcda
-	$(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
-
-# make coverage-html -- HTML output via lcov
-
-.PHONY: coverage-html
-coverage-html: coverage-html-stamp
-
-GENHTML_FLAGS = -q --legend
-GENHTML_TITLE = PostgreSQL $(VERSION)
-
-coverage-html-stamp: lcov_base.info lcov_test.info
-	rm -rf coverage
-	$(GENHTML) $(GENHTML_FLAGS) -o coverage --title='$(GENHTML_TITLE)' --num-spaces=4 $(if $(filter no,$(vpath_build)),--prefix='$(abs_top_srcdir)') $^
-	touch $@
-
-LCOV += --gcov-tool $(GCOV)
-LCOVFLAGS = -q --no-external
-
-all_gcno_files = $(shell find . -name '*.gcno' -print)
-
-lcov_base.info: $(all_gcno_files)
-	$(LCOV) $(LCOVFLAGS) -c -i -d . -d $(srcdir) -o $@
-
-all_gcda_files = $(shell find . -name '*.gcda' -print)
-
-lcov_test.info: $(all_gcda_files)
-	$(LCOV) $(LCOVFLAGS) -c -d . -d $(srcdir) -o $@
-
-
-# hook for clean-up
-clean distclean: clean-coverage
-
-.PHONY: clean-coverage
-clean-coverage:
-	rm -rf coverage coverage-html-stamp
-	rm -f *.gcda *.gcno lcov*.info *.gcov .*.gcov *.gcov.out
-
-
-# User-callable target to reset counts between test runs
-coverage-clean:
-	rm -f `find . -name '*.gcda' -print`
-
-endif # enable_coverage
-
-##########################################################################
-#
-# LLVM support
-#
-
-ifndef COMPILE.c.bc
-# -Wno-ignored-attributes added so gnu_printf doesn't trigger
-# warnings, when the main binary is compiled with C.
-COMPILE.c.bc = $(CLANG) -Wno-ignored-attributes $(BITCODE_CFLAGS) $(CPPFLAGS) -flto=thin -emit-llvm -c
-endif
-
-ifndef COMPILE.cxx.bc
-COMPILE.cxx.bc = $(CLANG) -xc++ -Wno-ignored-attributes $(BITCODE_CXXFLAGS) $(CPPFLAGS) -flto=thin -emit-llvm -c
-endif
-
-%.bc : %.c
-	$(COMPILE.c.bc) -o $@ $<
-
-%.bc : %.cpp
-	$(COMPILE.cxx.bc) -o $@ $<
-
-# Install LLVM bitcode module (for JITing).
-#
-# The arguments are:
-# $(1) name of the module (e.g. an extension's name or postgres for core code)
-# $(2) source objects, with .o suffix
-#
-# The many INSTALL_DATA invocations aren't particularly fast, it'd be
-# good if we could coalesce them, but I didn't find a good way.
-#
-# Note: blank line at end of macro is necessary to let it be used in foreach
-define install_llvm_module
-$(MKDIR_P) '$(DESTDIR)${bitcodedir}/$(1)'
-$(MKDIR_P) $(sort $(dir $(addprefix '$(DESTDIR)${bitcodedir}'/$(1)/, $(2))))
-$(foreach obj, ${2}, $(INSTALL_DATA) $(patsubst %.o,%.bc, $(obj)) '$(DESTDIR)${bitcodedir}'/$(1)/$(dir $(obj))
-)
-cd '$(DESTDIR)${bitcodedir}' && $(LLVM_BINPATH)/llvm-lto -thinlto -thinlto-action=thinlink -o $(1).index.bc $(addprefix $(1)/,$(patsubst %.o,%.bc, $(2)))
-
-endef
-
-# Uninstall LLVM bitcode module.
-#
-# The arguments are:
-# $(1) name of the module (e.g. an extension's name or postgres for core code)
-#
-# This intentionally doesn't use the explicit installed file list,
-# seems too likely to change regularly.
-define uninstall_llvm_module
-rm -rf '$(DESTDIR)${bitcodedir}/$(1)/'
-rm -f '$(DESTDIR)${bitcodedir}/$(1).index.bc'
-
-endef