create-blocklet 0.5.15 → 0.5.17

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "create-blocklet",
-  "version": "0.5.15",
+  "version": "0.5.17",
   "exports": "./index.js",
   "type": "module",
   "repository": "git@github.com:blocklet/create-blocklet.git",
@@ -29,9 +29,9 @@
     "test:run": "vitest run"
   },
   "dependencies": {
-    "@arcblock/did": "^1.18.36",
-    "@ocap/mcrypto": "^1.18.36",
-    "@ocap/util": "^1.18.36",
+    "@arcblock/did": "^1.18.50",
+    "@ocap/mcrypto": "^1.18.50",
+    "@ocap/util": "^1.18.50",
     "boxen": "^6.2.1",
     "ejs": "^3.1.8",
     "envfile": "^6.18.0",
@@ -46,8 +46,8 @@
   },
   "devDependencies": {
     "@arcblock/eslint-config-base": "0.2.2",
-    "eslint": "^8.33.0",
-    "prettier": "^2.8.3",
+    "eslint": "^8.34.0",
+    "prettier": "^2.8.4",
     "vitest": "^0.19.1"
   }
 }

package/templates/express-api/README.md

@@ -29,16 +29,16 @@ This blocklet is a dapp project, which means this is a full-stack application. I
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -84,7 +84,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Get a `accessToken` by using this command.
 
-  > Why we need a `accessToken`?  
+  > Why we need a `accessToken`?
   > A `accessToken` is genrate by blocklet store, which help us upload our blocklet to any store.
 
   Set `accessToken` to blocklet config
@@ -103,14 +103,14 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Or you can simply use `npm run upload` command.
 
-- You also can upload a new version to a store by Github CI.  
+- You also can upload a new version to a store by Github CI.
   Bump version at first.
 
   ```shell
   make bump-version
   ```
 
-  Push your code to Github main/master branch, or make a pull request to the main/master branch.  
+  Push your code to Github main/master branch, or make a pull request to the main/master branch.
   The CI workflow will automatically upload a new version to a store.
 
 ## Q & A
@@ -138,7 +138,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License
 

package/templates/express-api/package.json

@@ -31,19 +31,19 @@
   "license": "ISC",
   "dependencies": {
     "@arcblock/did-auth-storage-nedb": "^1.7.1",
-    "@blocklet/sdk": "^1.8.62",
-    "@ocap/client": "^1.18.36",
+    "@blocklet/sdk": "^1.8.65",
+    "@ocap/client": "^1.18.50",
     "dotenv-flow": "^3.2.0",
     "express": "^4.18.2"
   },
   "devDependencies": {
     "@arcblock/eslint-config-base": "^0.2.3",
     "bumpp": "^8.2.1",
-    "eslint": "^8.33.0",
+    "eslint": "^8.34.0",
     "husky": "^8.0.3",
     "lint-staged": "^12.5.0",
     "nodemon": "^2.0.20",
-    "prettier": "^2.8.3",
+    "prettier": "^2.8.4",
     "rimraf": "^3.0.2",
     "zx": "^7.1.1"
   }

package/templates/html-static/README.md

@@ -25,16 +25,16 @@ This blocklet is a static project, which means this is a frontend application. I
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -80,7 +80,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Get a `accessToken` from blocklet store.
 
-  > Why we need a `accessToken`?  
+  > Why we need a `accessToken`?
   > A `accessToken` is genrate by blocklet store, which help us upload our blocklet to any store.
 
   Set `accessToken` to blocklet config
@@ -99,14 +99,14 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Or you can simply use `npm run upload` command.
 
-- You also can upload a new version to blocklet store by Github CI.  
+- You also can upload a new version to blocklet store by Github CI.
   Bump version at first.
 
   ```shell
   make bump-version
   ```
 
-  Push your code to Github main/master branch, or make a pull request to the main/master branch.  
+  Push your code to Github main/master branch, or make a pull request to the main/master branch.
   The CI workflow will automatically upload a new version to a store.
 
 ## Q & A
@@ -134,7 +134,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License
 

package/templates/html-static/app/index.html

@@ -16,11 +16,11 @@
           <p>Get started by edit <code class="code">app/index.html</code> file</p>
         </div>
         <div class="card-list">
-          <a class="card" href="https://docs.arcblock.io/abtnode/en/blocklet" target="_blank">
+          <a class="card" href="https://developer.blocklet.io/docs/en/blocklet" target="_blank">
             <h3>Documentation →</h3>
             <p>Find in-depth information about blocklet features and API.</p>
           </a>
-          <a class="card" href="https://docs.arcblock.io/abtnode/en/introduction" target="_blank">
+          <a class="card" href="https://developer.blocklet.io/docs/en" target="_blank">
             <h3>Blocklet Server →</h3>
             <p>Learn about Blocklet Server</p>
           </a>

package/templates/monorepo/README.md

@@ -25,16 +25,16 @@ This project is a monorepo project, which means that there are multiple blocklet
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. init project
 

package/templates/monorepo/package.json

@@ -25,9 +25,9 @@
   "devDependencies": {
     "@arcblock/eslint-config": "0.2.2",
     "bumpp": "^7.2.0",
-    "eslint": "^8.33.0",
+    "eslint": "^8.34.0",
     "husky": "^4.3.8",
-    "prettier": "^2.8.3",
+    "prettier": "^2.8.4",
     "zx": "^7.1.1"
   }
 }

package/templates/nextjs-dapp/README.md

@@ -36,16 +36,16 @@ This blocklet is a dapp project, which means this is a full-stack application. I
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -91,7 +91,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Get a `accessToken` by using this command.
 
-  > Why we need a `accessToken`?  
+  > Why we need a `accessToken`?
   > A `accessToken` is genrate by blocklet store, which help us upload our blocklet to any store.
 
   Set `accessToken` to blocklet config
@@ -110,14 +110,14 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Or you can simply use `npm run upload` command.
 
-- You also can upload a new version to a store by Github CI.  
+- You also can upload a new version to a store by Github CI.
   Bump version at first.
 
   ```shell
   make bump-version
   ```
 
-  Push your code to Github main/master branch, or make a pull request to the main/master branch.  
+  Push your code to Github main/master branch, or make a pull request to the main/master branch.
   The CI workflow will automatically upload a new version to a store.
 
 ## Q & A
@@ -145,7 +145,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License
 

package/templates/nextjs-dapp/package.json

@@ -28,12 +28,12 @@
     ]
   },
   "dependencies": {
-    "@arcblock/did-auth": "^1.18.36",
+    "@arcblock/did-auth": "^1.18.50",
     "@arcblock/did-auth-storage-nedb": "^1.7.1",
-    "@blocklet/sdk": "^1.8.62",
-    "@ocap/client": "^1.18.36",
-    "@ocap/mcrypto": "^1.18.36",
-    "@ocap/wallet": "^1.18.36",
+    "@blocklet/sdk": "^1.8.65",
+    "@ocap/client": "^1.18.50",
+    "@ocap/mcrypto": "^1.18.50",
+    "@ocap/wallet": "^1.18.50",
     "dotenv-flow": "^3.2.0",
     "express": "^4.18.2",
     "next": "12.2.3",

package/templates/react-dapp/README.md

@@ -36,16 +36,16 @@ This blocklet is a dapp project, which means this is a full-stack application. I
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -91,7 +91,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Get a `accessToken` by using this command.
 
-  > Why we need a `accessToken`?  
+  > Why we need a `accessToken`?
   > A `accessToken` is genrate by blocklet store, which help us upload our blocklet to any store.
 
   Set `accessToken` to blocklet config
@@ -110,14 +110,14 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Or you can simply use `npm run upload` command.
 
-- You also can upload a new version to a store by Github CI.  
+- You also can upload a new version to a store by Github CI.
   Bump version at first.
 
   ```shell
   npm run bump-version
   ```
 
-  Push your code to Github main/master branch, or make a pull request to the main/master branch.  
+  Push your code to Github main/master branch, or make a pull request to the main/master branch.
   The CI workflow will automatically upload a new version to a store.
 
 ## Q & A
@@ -145,7 +145,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License
 

package/templates/react-dapp/package.json

@@ -40,12 +40,12 @@
     ]
   },
   "dependencies": {
-    "@arcblock/did-auth": "^1.18.36",
+    "@arcblock/did-auth": "^1.18.50",
     "@arcblock/did-auth-storage-nedb": "^1.7.1",
-    "@blocklet/sdk": "^1.8.62",
-    "@ocap/client": "^1.18.36",
-    "@ocap/mcrypto": "^1.18.36",
-    "@ocap/wallet": "^1.18.36",
+    "@blocklet/sdk": "^1.8.65",
+    "@ocap/client": "^1.18.50",
+    "@ocap/mcrypto": "^1.18.50",
+    "@ocap/wallet": "^1.18.50",
     "axios": "^0.27.2",
     "compression": "^1.7.4",
     "cookie-parser": "^1.4.6",
@@ -56,7 +56,7 @@
     "express-history-api-fallback": "^2.2.1",
     "react": "^18.2.0",
     "react-dom": "^18.2.0",
-    "react-router-dom": "^6.8.0",
+    "react-router-dom": "^6.8.1",
     "rimraf": "^3.0.2"
   },
   "devDependencies": {
@@ -64,14 +64,15 @@
     "@vitejs/plugin-react": "^2.2.0",
     "bumpp": "^8.2.1",
     "cross-env": "^7.0.3",
-    "eslint": "^8.33.0",
+    "eslint": "^8.34.0",
     "husky": "^8.0.3",
     "lint-staged": "^12.5.0",
     "nodemon": "^2.0.20",
     "npm-run-all": "^4.1.5",
-    "prettier": "^2.8.3",
+    "prettier": "^2.8.4",
     "vite": "^3.2.5",
-    "vite-plugin-blocklet": "^0.5.15",
+    "vite-plugin-blocklet": "^0.5.17",
+    "vite-plugin-node-polyfills": "^0.7.0",
     "vite-plugin-svgr": "^2.4.0",
     "zx": "^7.1.1"
   }

package/templates/react-dapp/src/pages/home.jsx

@@ -12,7 +12,7 @@ function Home() {
       <Link className="app-link" to="/about">
         About
       </Link>
-      <a className="app-link" href="https://docs.arcblock.io/abtnode/" target="_blank" rel="noopener noreferrer">
+      <a className="app-link" href="https://developer.blocklet.io/docs/" target="_blank" rel="noopener noreferrer">
         Learn Blocklet
       </a>
     </header>

package/templates/react-dapp/vite.config.js

@@ -1,11 +1,12 @@
 import { defineConfig } from 'vite';
 import react from '@vitejs/plugin-react';
 import { createBlockletPlugin } from 'vite-plugin-blocklet';
+import { nodePolyfills } from 'vite-plugin-node-polyfills';
 import svgr from 'vite-plugin-svgr';
 
 // https://vitejs.dev/config/
 export default defineConfig(() => {
   return {
-    plugins: [react(), createBlockletPlugin(), svgr()],
+    plugins: [react(), createBlockletPlugin(), nodePolyfills({ protocolImports: true }), svgr()],
   };
 });

package/templates/react-dapp-ts/README.md

@@ -42,14 +42,14 @@ This blocklet is a dapp project, which means this is a full-stack application. I
 
    Blocklet needs blocklet server as a dependency. So you need to install it first.
    `npm install -g @blocklet/cli`
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
    Before starting an blocklet server, you need to init blocklet server.
    `blocklet server init --mode=debug`
    `blocklet server start`
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -149,7 +149,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License
 

package/templates/react-dapp-ts/api/src/index.ts

@@ -37,7 +37,7 @@ if (isProduction) {
   app.use(fallback('index.html', { root: staticDir }));
 
   // eslint-disable-next-line @typescript-eslint/no-unused-vars
-  app.use(<ErrorRequestHandler>((err, req, res, next) => {
+  app.use(<ErrorRequestHandler>((err, _req, res, _next) => {
     logger.error(err.stack);
     res.status(500).send('Something broke!');
   }));

package/templates/react-dapp-ts/package.json

@@ -38,12 +38,12 @@
     ]
   },
   "dependencies": {
-    "@arcblock/did-auth": "^1.18.36",
+    "@arcblock/did-auth": "^1.18.50",
     "@arcblock/did-auth-storage-nedb": "^1.7.1",
-    "@blocklet/sdk": "^1.8.63",
-    "@ocap/client": "^1.18.36",
-    "@ocap/mcrypto": "^1.18.36",
-    "@ocap/wallet": "^1.18.36",
+    "@blocklet/sdk": "^1.8.65",
+    "@ocap/client": "^1.18.50",
+    "@ocap/mcrypto": "^1.18.50",
+    "@ocap/wallet": "^1.18.50",
     "axios": "^0.27.2",
     "compression": "^1.7.4",
     "cookie-parser": "^1.4.6",
@@ -54,7 +54,7 @@
     "express-history-api-fallback": "^2.2.1",
     "react": "^18.2.0",
     "react-dom": "^18.2.0",
-    "react-router-dom": "^6.8.0",
+    "react-router-dom": "^6.8.1",
     "rimraf": "^3.0.2"
   },
   "devDependencies": {
@@ -64,25 +64,26 @@
     "@types/cookie-parser": "^1.4.3",
     "@types/cors": "^2.8.13",
     "@types/dotenv-flow": "^3.2.0",
-    "@types/express": "^4.17.15",
-    "@types/node": "^18.11.18",
-    "@types/react": "^18.0.26",
-    "@types/react-dom": "^18.0.10",
+    "@types/express": "^4.17.17",
+    "@types/node": "^18.14.1",
+    "@types/react": "^18.0.28",
+    "@types/react-dom": "^18.0.11",
     "@vitejs/plugin-react": "^2.2.0",
     "bumpp": "^8.2.1",
     "cross-env": "^7.0.3",
-    "eslint": "^8.30.0",
-    "husky": "^8.0.2",
+    "eslint": "^8.34.0",
+    "husky": "^8.0.3",
     "import-sort-style-module": "^6.0.0",
     "lint-staged": "^12.5.0",
     "nodemon": "^2.0.20",
     "npm-run-all": "^4.1.5",
-    "prettier": "^2.8.1",
+    "prettier": "^2.8.4",
     "prettier-plugin-import-sort": "^0.0.7",
     "ts-node": "^10.9.1",
-    "typescript": "^4.9.4",
+    "typescript": "^4.9.5",
     "vite": "^3.2.5",
-    "vite-plugin-blocklet": "^0.5.15",
+    "vite-plugin-blocklet": "^0.5.17",
+    "vite-plugin-node-polyfills": "^0.7.0",
     "vite-plugin-svgr": "^2.4.0",
     "zx": "^7.1.1"
   },

package/templates/react-dapp-ts/src/pages/home.tsx

@@ -12,7 +12,7 @@ function Home() {
       <Link className="app-link" to="/about">
         About
       </Link>
-      <a className="app-link" href="https://docs.arcblock.io/abtnode/" target="_blank" rel="noopener noreferrer">
+      <a className="app-link" href="https://developer.blocklet.io/docs/" target="_blank" rel="noopener noreferrer">
         Learn Blocklet
       </a>
     </header>

package/templates/react-dapp-ts/vite.config.ts

@@ -2,12 +2,13 @@
 import react from '@vitejs/plugin-react';
 import { defineConfig } from 'vite';
 import { createBlockletPlugin } from 'vite-plugin-blocklet';
+import { nodePolyfills } from 'vite-plugin-node-polyfills';
 import svgr from 'vite-plugin-svgr';
 
 // https://vitejs.dev/config/
 export default defineConfig(() => {
   return {
-    plugins: [react(), createBlockletPlugin(), svgr()],
+    plugins: [react(), createBlockletPlugin(), nodePolyfills({ protocolImports: true }), svgr()],
     build: {
       // 禁止 preload 可以解决 js 的请求没有 refferer 的问题
       modulePreload: false,

package/templates/react-gun-dapp/README.md

@@ -36,16 +36,16 @@ This blocklet is a dapp project, which means this is a full-stack application. I
 
 1. Make sure you have [@blocklet/cli](https://www.npmjs.com/package/@blocklet/cli) installed
 
-   Blocklet needs blocklet server as a dependency. So you need to install it first.  
-   `npm install -g @blocklet/cli`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#use-the-binary-distribution)
+   Blocklet needs blocklet server as a dependency. So you need to install it first.
+   `npm install -g @blocklet/cli`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution](https://developer.blocklet.io/docs/en/quick-start/blocklet-server#use-the-binary-distribution)
 
 2. Init blocklet server & start blocklet server
 
-   Before starting an blocklet server, you need to init blocklet server.  
-   `blocklet server init --mode=debug`  
-   `blocklet server start`  
-   See details in [https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node](https://docs.arcblock.io/abtnode/en/introduction/abtnode-setup#configure-abt-node)
+   Before starting an blocklet server, you need to init blocklet server.
+   `blocklet server init --mode=debug`
+   `blocklet server start`
+   See details in [https://developer.blocklet.io/docs/en/quick-start/blocklet-server](https://developer.blocklet.io/docs/en/quick-start/blocklet-server)
 
 3. Go to the project directory `cd [name]`
 4. Install dependencies: `npm install` or `yarn`
@@ -91,7 +91,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Get a `accessToken` by using this command.
 
-  > Why we need a `accessToken`?  
+  > Why we need a `accessToken`?
   > A `accessToken` is genrate by blocklet store, which help us upload our blocklet to any store.
 
   Set `accessToken` to blocklet config
@@ -110,14 +110,14 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 
   Or you can simply use `npm run upload` command.
 
-- You also can upload a new version to a store by Github CI.  
+- You also can upload a new version to a store by Github CI.
   Bump version at first.
 
   ```shell
   make bump-version
   ```
 
-  Push your code to Github main/master branch, or make a pull request to the main/master branch.  
+  Push your code to Github main/master branch, or make a pull request to the main/master branch.
   The CI workflow will automatically upload a new version to a store.
 
 ## Q & A
@@ -145,7 +145,7 @@ After developing a blocklet, you may need to bundle it. Use `npm run bundle` com
 ## Learn More
 
 - Full specification of `blocklet.yml`: [https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md](https://github.com/blocklet/blocklet-specification/blob/main/docs/meta.md)
-- Full document of Blocklet Server & blocklet development: [https://docs.arcblock.io/abtnode/en/introduction](https://docs.arcblock.io/abtnode/en/introduction)
+- Full document of Blocklet Server & blocklet development: [https://developer.blocklet.io/docs/en](https://developer.blocklet.io/docs/en)
 
 ## License