couchbase 4.4.1-dev.2 → 4.4.1

package/deps/couchbase-cxx-cache/snappy/76d5cfe9eb57e13784ae53647f505edbe9341bdf/snappy/snappy.cc

@@ -1,2427 +0,0 @@
-// Copyright 2005 Google Inc. All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include "snappy-internal.h"
-#include "snappy-sinksource.h"
-#include "snappy.h"
-#if !defined(SNAPPY_HAVE_BMI2)
-// __BMI2__ is defined by GCC and Clang. Visual Studio doesn't target BMI2
-// specifically, but it does define __AVX2__ when AVX2 support is available.
-// Fortunately, AVX2 was introduced in Haswell, just like BMI2.
-//
-// BMI2 is not defined as a subset of AVX2 (unlike SSSE3 and AVX above). So,
-// GCC and Clang can build code with AVX2 enabled but BMI2 disabled, in which
-// case issuing BMI2 instructions results in a compiler error.
-#if defined(__BMI2__) || (defined(_MSC_VER) && defined(__AVX2__))
-#define SNAPPY_HAVE_BMI2 1
-#else
-#define SNAPPY_HAVE_BMI2 0
-#endif
-#endif  // !defined(SNAPPY_HAVE_BMI2)
-
-#if !defined(SNAPPY_HAVE_X86_CRC32)
-#if defined(__SSE4_2__)
-#define SNAPPY_HAVE_X86_CRC32 1
-#else
-#define SNAPPY_HAVE_X86_CRC32 0
-#endif
-#endif  // !defined(SNAPPY_HAVE_X86_CRC32)
-
-#if !defined(SNAPPY_HAVE_NEON_CRC32)
-#if SNAPPY_HAVE_NEON && defined(__ARM_FEATURE_CRC32)
-#define SNAPPY_HAVE_NEON_CRC32 1
-#else
-#define SNAPPY_HAVE_NEON_CRC32 0
-#endif
-#endif  // !defined(SNAPPY_HAVE_NEON_CRC32)
-
-#if SNAPPY_HAVE_BMI2 || SNAPPY_HAVE_X86_CRC32
-// Please do not replace with <x86intrin.h>. or with headers that assume more
-// advanced SSE versions without checking with all the OWNERS.
-#include <immintrin.h>
-#elif SNAPPY_HAVE_NEON_CRC32
-#include <arm_acle.h>
-#endif
-
-#if defined(__GNUC__)
-#define SNAPPY_PREFETCH(ptr) __builtin_prefetch(ptr, 0, 3)
-#else
-#define SNAPPY_PREFETCH(ptr) (void)(ptr)
-#endif
-
-#include <algorithm>
-#include <array>
-#include <cstddef>
-#include <cstdint>
-#include <cstdio>
-#include <cstring>
-#include <string>
-#include <utility>
-#include <vector>
-
-namespace snappy {
-
-namespace {
-
-// The amount of slop bytes writers are using for unconditional copies.
-constexpr int kSlopBytes = 64;
-
-using internal::char_table;
-using internal::COPY_1_BYTE_OFFSET;
-using internal::COPY_2_BYTE_OFFSET;
-using internal::COPY_4_BYTE_OFFSET;
-using internal::kMaximumTagLength;
-using internal::LITERAL;
-#if SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-using internal::V128;
-using internal::V128_Load;
-using internal::V128_LoadU;
-using internal::V128_Shuffle;
-using internal::V128_StoreU;
-using internal::V128_DupChar;
-#endif
-
-// We translate the information encoded in a tag through a lookup table to a
-// format that requires fewer instructions to decode. Effectively we store
-// the length minus the tag part of the offset. The lowest significant byte
-// thus stores the length. While total length - offset is given by
-// entry - ExtractOffset(type). The nice thing is that the subtraction
-// immediately sets the flags for the necessary check that offset >= length.
-// This folds the cmp with sub. We engineer the long literals and copy-4 to
-// always fail this check, so their presence doesn't affect the fast path.
-// To prevent literals from triggering the guard against offset < length (offset
-// does not apply to literals) the table is giving them a spurious offset of
-// 256.
-inline constexpr int16_t MakeEntry(int16_t len, int16_t offset) {
-  return len - (offset << 8);
-}
-
-inline constexpr int16_t LengthMinusOffset(int data, int type) {
-  return type == 3   ? 0xFF                    // copy-4 (or type == 3)
-         : type == 2 ? MakeEntry(data + 1, 0)  // copy-2
-         : type == 1 ? MakeEntry((data & 7) + 4, data >> 3)  // copy-1
-         : data < 60 ? MakeEntry(data + 1, 1)  // note spurious offset.
-                     : 0xFF;                   // long literal
-}
-
-inline constexpr int16_t LengthMinusOffset(uint8_t tag) {
-  return LengthMinusOffset(tag >> 2, tag & 3);
-}
-
-template <size_t... Ints>
-struct index_sequence {};
-
-template <std::size_t N, size_t... Is>
-struct make_index_sequence : make_index_sequence<N - 1, N - 1, Is...> {};
-
-template <size_t... Is>
-struct make_index_sequence<0, Is...> : index_sequence<Is...> {};
-
-template <size_t... seq>
-constexpr std::array<int16_t, 256> MakeTable(index_sequence<seq...>) {
-  return std::array<int16_t, 256>{LengthMinusOffset(seq)...};
-}
-
-alignas(64) const std::array<int16_t, 256> kLengthMinusOffset =
-    MakeTable(make_index_sequence<256>{});
-
-// Given a table of uint16_t whose size is mask / 2 + 1, return a pointer to the
-// relevant entry, if any, for the given bytes.  Any hash function will do,
-// but a good hash function reduces the number of collisions and thus yields
-// better compression for compressible input.
-//
-// REQUIRES: mask is 2 * (table_size - 1), and table_size is a power of two.
-inline uint16_t* TableEntry(uint16_t* table, uint32_t bytes, uint32_t mask) {
-  // Our choice is quicker-and-dirtier than the typical hash function;
-  // empirically, that seems beneficial.  The upper bits of kMagic * bytes are a
-  // higher-quality hash than the lower bits, so when using kMagic * bytes we
-  // also shift right to get a higher-quality end result.  There's no similar
-  // issue with a CRC because all of the output bits of a CRC are equally good
-  // "hashes." So, a CPU instruction for CRC, if available, tends to be a good
-  // choice.
-#if SNAPPY_HAVE_NEON_CRC32
-  // We use mask as the second arg to the CRC function, as it's about to
-  // be used anyway; it'd be equally correct to use 0 or some constant.
-  // Mathematically, _mm_crc32_u32 (or similar) is a function of the
-  // xor of its arguments.
-  const uint32_t hash = __crc32cw(bytes, mask);
-#elif SNAPPY_HAVE_X86_CRC32
-  const uint32_t hash = _mm_crc32_u32(bytes, mask);
-#else
-  constexpr uint32_t kMagic = 0x1e35a7bd;
-  const uint32_t hash = (kMagic * bytes) >> (31 - kMaxHashTableBits);
-#endif
-  return reinterpret_cast<uint16_t*>(reinterpret_cast<uintptr_t>(table) +
-                                     (hash & mask));
-}
-
-}  // namespace
-
-size_t MaxCompressedLength(size_t source_bytes) {
-  // Compressed data can be defined as:
-  //    compressed := item* literal*
-  //    item       := literal* copy
-  //
-  // The trailing literal sequence has a space blowup of at most 62/60
-  // since a literal of length 60 needs one tag byte + one extra byte
-  // for length information.
-  //
-  // Item blowup is trickier to measure.  Suppose the "copy" op copies
-  // 4 bytes of data.  Because of a special check in the encoding code,
-  // we produce a 4-byte copy only if the offset is < 65536.  Therefore
-  // the copy op takes 3 bytes to encode, and this type of item leads
-  // to at most the 62/60 blowup for representing literals.
-  //
-  // Suppose the "copy" op copies 5 bytes of data.  If the offset is big
-  // enough, it will take 5 bytes to encode the copy op.  Therefore the
-  // worst case here is a one-byte literal followed by a five-byte copy.
-  // I.e., 6 bytes of input turn into 7 bytes of "compressed" data.
-  //
-  // This last factor dominates the blowup, so the final estimate is:
-  return 32 + source_bytes + source_bytes / 6;
-}
-
-namespace {
-
-void UnalignedCopy64(const void* src, void* dst) {
-  char tmp[8];
-  std::memcpy(tmp, src, 8);
-  std::memcpy(dst, tmp, 8);
-}
-
-void UnalignedCopy128(const void* src, void* dst) {
-  // std::memcpy() gets vectorized when the appropriate compiler options are
-  // used. For example, x86 compilers targeting SSE2+ will optimize to an SSE2
-  // load and store.
-  char tmp[16];
-  std::memcpy(tmp, src, 16);
-  std::memcpy(dst, tmp, 16);
-}
-
-template <bool use_16bytes_chunk>
-inline void ConditionalUnalignedCopy128(const char* src, char* dst) {
-  if (use_16bytes_chunk) {
-    UnalignedCopy128(src, dst);
-  } else {
-    UnalignedCopy64(src, dst);
-    UnalignedCopy64(src + 8, dst + 8);
-  }
-}
-
-// Copy [src, src+(op_limit-op)) to [op, (op_limit-op)) a byte at a time. Used
-// for handling COPY operations where the input and output regions may overlap.
-// For example, suppose:
-//    src       == "ab"
-//    op        == src + 2
-//    op_limit  == op + 20
-// After IncrementalCopySlow(src, op, op_limit), the result will have eleven
-// copies of "ab"
-//    ababababababababababab
-// Note that this does not match the semantics of either std::memcpy() or
-// std::memmove().
-inline char* IncrementalCopySlow(const char* src, char* op,
-                                 char* const op_limit) {
-  // TODO: Remove pragma when LLVM is aware this
-  // function is only called in cold regions and when cold regions don't get
-  // vectorized or unrolled.
-#ifdef __clang__
-#pragma clang loop unroll(disable)
-#endif
-  while (op < op_limit) {
-    *op++ = *src++;
-  }
-  return op_limit;
-}
-
-#if SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-
-// Computes the bytes for shuffle control mask (please read comments on
-// 'pattern_generation_masks' as well) for the given index_offset and
-// pattern_size. For example, when the 'offset' is 6, it will generate a
-// repeating pattern of size 6. So, the first 16 byte indexes will correspond to
-// the pattern-bytes {0, 1, 2, 3, 4, 5, 0, 1, 2, 3, 4, 5, 0, 1, 2, 3} and the
-// next 16 byte indexes will correspond to the pattern-bytes {4, 5, 0, 1, 2, 3,
-// 4, 5, 0, 1, 2, 3, 4, 5, 0, 1}. These byte index sequences are generated by
-// calling MakePatternMaskBytes(0, 6, index_sequence<16>()) and
-// MakePatternMaskBytes(16, 6, index_sequence<16>()) respectively.
-template <size_t... indexes>
-inline constexpr std::array<char, sizeof...(indexes)> MakePatternMaskBytes(
-    int index_offset, int pattern_size, index_sequence<indexes...>) {
-  return {static_cast<char>((index_offset + indexes) % pattern_size)...};
-}
-
-// Computes the shuffle control mask bytes array for given pattern-sizes and
-// returns an array.
-template <size_t... pattern_sizes_minus_one>
-inline constexpr std::array<std::array<char, sizeof(V128)>,
-                            sizeof...(pattern_sizes_minus_one)>
-MakePatternMaskBytesTable(int index_offset,
-                          index_sequence<pattern_sizes_minus_one...>) {
-  return {
-      MakePatternMaskBytes(index_offset, pattern_sizes_minus_one + 1,
-                           make_index_sequence</*indexes=*/sizeof(V128)>())...};
-}
-
-// This is an array of shuffle control masks that can be used as the source
-// operand for PSHUFB to permute the contents of the destination XMM register
-// into a repeating byte pattern.
-alignas(16) constexpr std::array<std::array<char, sizeof(V128)>,
-                                 16> pattern_generation_masks =
-    MakePatternMaskBytesTable(
-        /*index_offset=*/0,
-        /*pattern_sizes_minus_one=*/make_index_sequence<16>());
-
-// Similar to 'pattern_generation_masks', this table is used to "rotate" the
-// pattern so that we can copy the *next 16 bytes* consistent with the pattern.
-// Basically, pattern_reshuffle_masks is a continuation of
-// pattern_generation_masks. It follows that, pattern_reshuffle_masks is same as
-// pattern_generation_masks for offsets 1, 2, 4, 8 and 16.
-alignas(16) constexpr std::array<std::array<char, sizeof(V128)>,
-                                 16> pattern_reshuffle_masks =
-    MakePatternMaskBytesTable(
-        /*index_offset=*/16,
-        /*pattern_sizes_minus_one=*/make_index_sequence<16>());
-
-SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-static inline V128 LoadPattern(const char* src, const size_t pattern_size) {
-  V128 generation_mask = V128_Load(reinterpret_cast<const V128*>(
-      pattern_generation_masks[pattern_size - 1].data()));
-  // Uninitialized bytes are masked out by the shuffle mask.
-  // TODO: remove annotation and macro defs once MSan is fixed.
-  SNAPPY_ANNOTATE_MEMORY_IS_INITIALIZED(src + pattern_size, 16 - pattern_size);
-  return V128_Shuffle(V128_LoadU(reinterpret_cast<const V128*>(src)),
-                      generation_mask);
-}
-
-SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-static inline std::pair<V128 /* pattern */, V128 /* reshuffle_mask */>
-LoadPatternAndReshuffleMask(const char* src, const size_t pattern_size) {
-  V128 pattern = LoadPattern(src, pattern_size);
-
-  // This mask will generate the next 16 bytes in-place. Doing so enables us to
-  // write data by at most 4 V128_StoreU.
-  //
-  // For example, suppose pattern is:        abcdefabcdefabcd
-  // Shuffling with this mask will generate: efabcdefabcdefab
-  // Shuffling again will generate:          cdefabcdefabcdef
-  V128 reshuffle_mask = V128_Load(reinterpret_cast<const V128*>(
-      pattern_reshuffle_masks[pattern_size - 1].data()));
-  return {pattern, reshuffle_mask};
-}
-
-#endif  // SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-
-// Fallback for when we need to copy while extending the pattern, for example
-// copying 10 bytes from 3 positions back abc -> abcabcabcabca.
-//
-// REQUIRES: [dst - offset, dst + 64) is a valid address range.
-SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-static inline bool Copy64BytesWithPatternExtension(char* dst, size_t offset) {
-#if SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-  if (SNAPPY_PREDICT_TRUE(offset <= 16)) {
-    switch (offset) {
-      case 0:
-        return false;
-      case 1: {
-        // TODO: Ideally we should memset, move back once the
-        // codegen issues are fixed.
-        V128 pattern = V128_DupChar(dst[-1]);
-        for (int i = 0; i < 4; i++) {
-          V128_StoreU(reinterpret_cast<V128*>(dst + 16 * i), pattern);
-        }
-        return true;
-      }
-      case 2:
-      case 4:
-      case 8:
-      case 16: {
-        V128 pattern = LoadPattern(dst - offset, offset);
-        for (int i = 0; i < 4; i++) {
-          V128_StoreU(reinterpret_cast<V128*>(dst + 16 * i), pattern);
-        }
-        return true;
-      }
-      default: {
-        auto pattern_and_reshuffle_mask =
-            LoadPatternAndReshuffleMask(dst - offset, offset);
-        V128 pattern = pattern_and_reshuffle_mask.first;
-        V128 reshuffle_mask = pattern_and_reshuffle_mask.second;
-        for (int i = 0; i < 4; i++) {
-          V128_StoreU(reinterpret_cast<V128*>(dst + 16 * i), pattern);
-          pattern = V128_Shuffle(pattern, reshuffle_mask);
-        }
-        return true;
-      }
-    }
-  }
-#else
-  if (SNAPPY_PREDICT_TRUE(offset < 16)) {
-    if (SNAPPY_PREDICT_FALSE(offset == 0)) return false;
-    // Extend the pattern to the first 16 bytes.
-    // The simpler formulation of `dst[i - offset]` induces undefined behavior.
-    for (int i = 0; i < 16; i++) dst[i] = (dst - offset)[i];
-    // Find a multiple of pattern >= 16.
-    static std::array<uint8_t, 16> pattern_sizes = []() {
-      std::array<uint8_t, 16> res;
-      for (int i = 1; i < 16; i++) res[i] = (16 / i + 1) * i;
-      return res;
-    }();
-    offset = pattern_sizes[offset];
-    for (int i = 1; i < 4; i++) {
-      std::memcpy(dst + i * 16, dst + i * 16 - offset, 16);
-    }
-    return true;
-  }
-#endif  // SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-
-  // Very rare.
-  for (int i = 0; i < 4; i++) {
-    std::memcpy(dst + i * 16, dst + i * 16 - offset, 16);
-  }
-  return true;
-}
-
-// Copy [src, src+(op_limit-op)) to [op, op_limit) but faster than
-// IncrementalCopySlow. buf_limit is the address past the end of the writable
-// region of the buffer.
-inline char* IncrementalCopy(const char* src, char* op, char* const op_limit,
-                             char* const buf_limit) {
-#if SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-  constexpr int big_pattern_size_lower_bound = 16;
-#else
-  constexpr int big_pattern_size_lower_bound = 8;
-#endif
-
-  // Terminology:
-  //
-  // slop = buf_limit - op
-  // pat  = op - src
-  // len  = op_limit - op
-  assert(src < op);
-  assert(op < op_limit);
-  assert(op_limit <= buf_limit);
-  // NOTE: The copy tags use 3 or 6 bits to store the copy length, so len <= 64.
-  assert(op_limit - op <= 64);
-  // NOTE: In practice the compressor always emits len >= 4, so it is ok to
-  // assume that to optimize this function, but this is not guaranteed by the
-  // compression format, so we have to also handle len < 4 in case the input
-  // does not satisfy these conditions.
-
-  size_t pattern_size = op - src;
-  // The cases are split into different branches to allow the branch predictor,
-  // FDO, and static prediction hints to work better. For each input we list the
-  // ratio of invocations that match each condition.
-  //
-  // input        slop < 16   pat < 8  len > 16
-  // ------------------------------------------
-  // html|html4|cp   0%         1.01%    27.73%
-  // urls            0%         0.88%    14.79%
-  // jpg             0%        64.29%     7.14%
-  // pdf             0%         2.56%    58.06%
-  // txt[1-4]        0%         0.23%     0.97%
-  // pb              0%         0.96%    13.88%
-  // bin             0.01%     22.27%    41.17%
-  //
-  // It is very rare that we don't have enough slop for doing block copies. It
-  // is also rare that we need to expand a pattern. Small patterns are common
-  // for incompressible formats and for those we are plenty fast already.
-  // Lengths are normally not greater than 16 but they vary depending on the
-  // input. In general if we always predict len <= 16 it would be an ok
-  // prediction.
-  //
-  // In order to be fast we want a pattern >= 16 bytes (or 8 bytes in non-SSE)
-  // and an unrolled loop copying 1x 16 bytes (or 2x 8 bytes in non-SSE) at a
-  // time.
-
-  // Handle the uncommon case where pattern is less than 16 (or 8 in non-SSE)
-  // bytes.
-  if (pattern_size < big_pattern_size_lower_bound) {
-#if SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-    // Load the first eight bytes into an 128-bit XMM register, then use PSHUFB
-    // to permute the register's contents in-place into a repeating sequence of
-    // the first "pattern_size" bytes.
-    // For example, suppose:
-    //    src       == "abc"
-    //    op        == op + 3
-    // After V128_Shuffle(), "pattern" will have five copies of "abc"
-    // followed by one byte of slop: abcabcabcabcabca.
-    //
-    // The non-SSE fallback implementation suffers from store-forwarding stalls
-    // because its loads and stores partly overlap. By expanding the pattern
-    // in-place, we avoid the penalty.
-
-    // Typically, the op_limit is the gating factor so try to simplify the loop
-    // based on that.
-    if (SNAPPY_PREDICT_TRUE(op_limit <= buf_limit - 15)) {
-      auto pattern_and_reshuffle_mask =
-          LoadPatternAndReshuffleMask(src, pattern_size);
-      V128 pattern = pattern_and_reshuffle_mask.first;
-      V128 reshuffle_mask = pattern_and_reshuffle_mask.second;
-
-      // There is at least one, and at most four 16-byte blocks. Writing four
-      // conditionals instead of a loop allows FDO to layout the code with
-      // respect to the actual probabilities of each length.
-      // TODO: Replace with loop with trip count hint.
-      V128_StoreU(reinterpret_cast<V128*>(op), pattern);
-
-      if (op + 16 < op_limit) {
-        pattern = V128_Shuffle(pattern, reshuffle_mask);
-        V128_StoreU(reinterpret_cast<V128*>(op + 16), pattern);
-      }
-      if (op + 32 < op_limit) {
-        pattern = V128_Shuffle(pattern, reshuffle_mask);
-        V128_StoreU(reinterpret_cast<V128*>(op + 32), pattern);
-      }
-      if (op + 48 < op_limit) {
-        pattern = V128_Shuffle(pattern, reshuffle_mask);
-        V128_StoreU(reinterpret_cast<V128*>(op + 48), pattern);
-      }
-      return op_limit;
-    }
-    char* const op_end = buf_limit - 15;
-    if (SNAPPY_PREDICT_TRUE(op < op_end)) {
-      auto pattern_and_reshuffle_mask =
-          LoadPatternAndReshuffleMask(src, pattern_size);
-      V128 pattern = pattern_and_reshuffle_mask.first;
-      V128 reshuffle_mask = pattern_and_reshuffle_mask.second;
-
-      // This code path is relatively cold however so we save code size
-      // by avoiding unrolling and vectorizing.
-      //
-      // TODO: Remove pragma when when cold regions don't get
-      // vectorized or unrolled.
-#ifdef __clang__
-#pragma clang loop unroll(disable)
-#endif
-      do {
-        V128_StoreU(reinterpret_cast<V128*>(op), pattern);
-        pattern = V128_Shuffle(pattern, reshuffle_mask);
-        op += 16;
-      } while (SNAPPY_PREDICT_TRUE(op < op_end));
-    }
-    return IncrementalCopySlow(op - pattern_size, op, op_limit);
-#else   // !SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-    // If plenty of buffer space remains, expand the pattern to at least 8
-    // bytes. The way the following loop is written, we need 8 bytes of buffer
-    // space if pattern_size >= 4, 11 bytes if pattern_size is 1 or 3, and 10
-    // bytes if pattern_size is 2.  Precisely encoding that is probably not
-    // worthwhile; instead, invoke the slow path if we cannot write 11 bytes
-    // (because 11 are required in the worst case).
-    if (SNAPPY_PREDICT_TRUE(op <= buf_limit - 11)) {
-      while (pattern_size < 8) {
-        UnalignedCopy64(src, op);
-        op += pattern_size;
-        pattern_size *= 2;
-      }
-      if (SNAPPY_PREDICT_TRUE(op >= op_limit)) return op_limit;
-    } else {
-      return IncrementalCopySlow(src, op, op_limit);
-    }
-#endif  // SNAPPY_HAVE_VECTOR_BYTE_SHUFFLE
-  }
-  assert(pattern_size >= big_pattern_size_lower_bound);
-  constexpr bool use_16bytes_chunk = big_pattern_size_lower_bound == 16;
-
-  // Copy 1x 16 bytes (or 2x 8 bytes in non-SSE) at a time. Because op - src can
-  // be < 16 in non-SSE, a single UnalignedCopy128 might overwrite data in op.
-  // UnalignedCopy64 is safe because expanding the pattern to at least 8 bytes
-  // guarantees that op - src >= 8.
-  //
-  // Typically, the op_limit is the gating factor so try to simplify the loop
-  // based on that.
-  if (SNAPPY_PREDICT_TRUE(op_limit <= buf_limit - 15)) {
-    // There is at least one, and at most four 16-byte blocks. Writing four
-    // conditionals instead of a loop allows FDO to layout the code with respect
-    // to the actual probabilities of each length.
-    // TODO: Replace with loop with trip count hint.
-    ConditionalUnalignedCopy128<use_16bytes_chunk>(src, op);
-    if (op + 16 < op_limit) {
-      ConditionalUnalignedCopy128<use_16bytes_chunk>(src + 16, op + 16);
-    }
-    if (op + 32 < op_limit) {
-      ConditionalUnalignedCopy128<use_16bytes_chunk>(src + 32, op + 32);
-    }
-    if (op + 48 < op_limit) {
-      ConditionalUnalignedCopy128<use_16bytes_chunk>(src + 48, op + 48);
-    }
-    return op_limit;
-  }
-
-  // Fall back to doing as much as we can with the available slop in the
-  // buffer. This code path is relatively cold however so we save code size by
-  // avoiding unrolling and vectorizing.
-  //
-  // TODO: Remove pragma when when cold regions don't get vectorized
-  // or unrolled.
-#ifdef __clang__
-#pragma clang loop unroll(disable)
-#endif
-  for (char* op_end = buf_limit - 16; op < op_end; op += 16, src += 16) {
-    ConditionalUnalignedCopy128<use_16bytes_chunk>(src, op);
-  }
-  if (op >= op_limit) return op_limit;
-
-  // We only take this branch if we didn't have enough slop and we can do a
-  // single 8 byte copy.
-  if (SNAPPY_PREDICT_FALSE(op <= buf_limit - 8)) {
-    UnalignedCopy64(src, op);
-    src += 8;
-    op += 8;
-  }
-  return IncrementalCopySlow(src, op, op_limit);
-}
-
-}  // namespace
-
-template <bool allow_fast_path>
-static inline char* EmitLiteral(char* op, const char* literal, int len) {
-  // The vast majority of copies are below 16 bytes, for which a
-  // call to std::memcpy() is overkill. This fast path can sometimes
-  // copy up to 15 bytes too much, but that is okay in the
-  // main loop, since we have a bit to go on for both sides:
-  //
-  //   - The input will always have kInputMarginBytes = 15 extra
-  //     available bytes, as long as we're in the main loop, and
-  //     if not, allow_fast_path = false.
-  //   - The output will always have 32 spare bytes (see
-  //     MaxCompressedLength).
-  assert(len > 0);  // Zero-length literals are disallowed
-  int n = len - 1;
-  if (allow_fast_path && len <= 16) {
-    // Fits in tag byte
-    *op++ = LITERAL | (n << 2);
-
-    UnalignedCopy128(literal, op);
-    return op + len;
-  }
-
-  if (n < 60) {
-    // Fits in tag byte
-    *op++ = LITERAL | (n << 2);
-  } else {
-    int count = (Bits::Log2Floor(n) >> 3) + 1;
-    assert(count >= 1);
-    assert(count <= 4);
-    *op++ = LITERAL | ((59 + count) << 2);
-    // Encode in upcoming bytes.
-    // Write 4 bytes, though we may care about only 1 of them. The output buffer
-    // is guaranteed to have at least 3 more spaces left as 'len >= 61' holds
-    // here and there is a std::memcpy() of size 'len' below.
-    LittleEndian::Store32(op, n);
-    op += count;
-  }
-  // When allow_fast_path is true, we can overwrite up to 16 bytes.
-  if (allow_fast_path) {
-    char* destination = op;
-    const char* source = literal;
-    const char* end = destination + len;
-    do {
-      std::memcpy(destination, source, 16);
-      destination += 16;
-      source += 16;
-    } while (destination < end);
-  } else {
-    std::memcpy(op, literal, len);
-  }
-  return op + len;
-}
-
-template <bool len_less_than_12>
-static inline char* EmitCopyAtMost64(char* op, size_t offset, size_t len) {
-  assert(len <= 64);
-  assert(len >= 4);
-  assert(offset < 65536);
-  assert(len_less_than_12 == (len < 12));
-
-  if (len_less_than_12) {
-    uint32_t u = (len << 2) + (offset << 8);
-    uint32_t copy1 = COPY_1_BYTE_OFFSET - (4 << 2) + ((offset >> 3) & 0xe0);
-    uint32_t copy2 = COPY_2_BYTE_OFFSET - (1 << 2);
-    // It turns out that offset < 2048 is a difficult to predict branch.
-    // `perf record` shows this is the highest percentage of branch misses in
-    // benchmarks. This code produces branch free code, the data dependency
-    // chain that bottlenecks the throughput is so long that a few extra
-    // instructions are completely free (IPC << 6 because of data deps).
-    u += offset < 2048 ? copy1 : copy2;
-    LittleEndian::Store32(op, u);
-    op += offset < 2048 ? 2 : 3;
-  } else {
-    // Write 4 bytes, though we only care about 3 of them.  The output buffer
-    // is required to have some slack, so the extra byte won't overrun it.
-    uint32_t u = COPY_2_BYTE_OFFSET + ((len - 1) << 2) + (offset << 8);
-    LittleEndian::Store32(op, u);
-    op += 3;
-  }
-  return op;
-}
-
-template <bool len_less_than_12>
-static inline char* EmitCopy(char* op, size_t offset, size_t len) {
-  assert(len_less_than_12 == (len < 12));
-  if (len_less_than_12) {
-    return EmitCopyAtMost64</*len_less_than_12=*/true>(op, offset, len);
-  } else {
-    // A special case for len <= 64 might help, but so far measurements suggest
-    // it's in the noise.
-
-    // Emit 64 byte copies but make sure to keep at least four bytes reserved.
-    while (SNAPPY_PREDICT_FALSE(len >= 68)) {
-      op = EmitCopyAtMost64</*len_less_than_12=*/false>(op, offset, 64);
-      len -= 64;
-    }
-
-    // One or two copies will now finish the job.
-    if (len > 64) {
-      op = EmitCopyAtMost64</*len_less_than_12=*/false>(op, offset, 60);
-      len -= 60;
-    }
-
-    // Emit remainder.
-    if (len < 12) {
-      op = EmitCopyAtMost64</*len_less_than_12=*/true>(op, offset, len);
-    } else {
-      op = EmitCopyAtMost64</*len_less_than_12=*/false>(op, offset, len);
-    }
-    return op;
-  }
-}
-
-bool GetUncompressedLength(const char* start, size_t n, size_t* result) {
-  uint32_t v = 0;
-  const char* limit = start + n;
-  if (Varint::Parse32WithLimit(start, limit, &v) != NULL) {
-    *result = v;
-    return true;
-  } else {
-    return false;
-  }
-}
-
-namespace {
-uint32_t CalculateTableSize(uint32_t input_size) {
-  static_assert(
-      kMaxHashTableSize >= kMinHashTableSize,
-      "kMaxHashTableSize should be greater or equal to kMinHashTableSize.");
-  if (input_size > kMaxHashTableSize) {
-    return kMaxHashTableSize;
-  }
-  if (input_size < kMinHashTableSize) {
-    return kMinHashTableSize;
-  }
-  // This is equivalent to Log2Ceiling(input_size), assuming input_size > 1.
-  // 2 << Log2Floor(x - 1) is equivalent to 1 << (1 + Log2Floor(x - 1)).
-  return 2u << Bits::Log2Floor(input_size - 1);
-}
-}  // namespace
-
-namespace internal {
-WorkingMemory::WorkingMemory(size_t input_size) {
-  const size_t max_fragment_size = std::min(input_size, kBlockSize);
-  const size_t table_size = CalculateTableSize(max_fragment_size);
-  size_ = table_size * sizeof(*table_) + max_fragment_size +
-          MaxCompressedLength(max_fragment_size);
-  mem_ = std::allocator<char>().allocate(size_);
-  table_ = reinterpret_cast<uint16_t*>(mem_);
-  input_ = mem_ + table_size * sizeof(*table_);
-  output_ = input_ + max_fragment_size;
-}
-
-WorkingMemory::~WorkingMemory() {
-  std::allocator<char>().deallocate(mem_, size_);
-}
-
-uint16_t* WorkingMemory::GetHashTable(size_t fragment_size,
-                                      int* table_size) const {
-  const size_t htsize = CalculateTableSize(fragment_size);
-  memset(table_, 0, htsize * sizeof(*table_));
-  *table_size = htsize;
-  return table_;
-}
-}  // end namespace internal
-
-// Flat array compression that does not emit the "uncompressed length"
-// prefix. Compresses "input" string to the "*op" buffer.
-//
-// REQUIRES: "input" is at most "kBlockSize" bytes long.
-// REQUIRES: "op" points to an array of memory that is at least
-// "MaxCompressedLength(input.size())" in size.
-// REQUIRES: All elements in "table[0..table_size-1]" are initialized to zero.
-// REQUIRES: "table_size" is a power of two
-//
-// Returns an "end" pointer into "op" buffer.
-// "end - op" is the compressed size of "input".
-namespace internal {
-char* CompressFragment(const char* input, size_t input_size, char* op,
-                       uint16_t* table, const int table_size) {
-  // "ip" is the input pointer, and "op" is the output pointer.
-  const char* ip = input;
-  assert(input_size <= kBlockSize);
-  assert((table_size & (table_size - 1)) == 0);  // table must be power of two
-  const uint32_t mask = 2 * (table_size - 1);
-  const char* ip_end = input + input_size;
-  const char* base_ip = ip;
-
-  const size_t kInputMarginBytes = 15;
-  if (SNAPPY_PREDICT_TRUE(input_size >= kInputMarginBytes)) {
-    const char* ip_limit = input + input_size - kInputMarginBytes;
-
-    for (uint32_t preload = LittleEndian::Load32(ip + 1);;) {
-      // Bytes in [next_emit, ip) will be emitted as literal bytes.  Or
-      // [next_emit, ip_end) after the main loop.
-      const char* next_emit = ip++;
-      uint64_t data = LittleEndian::Load64(ip);
-      // The body of this loop calls EmitLiteral once and then EmitCopy one or
-      // more times.  (The exception is that when we're close to exhausting
-      // the input we goto emit_remainder.)
-      //
-      // In the first iteration of this loop we're just starting, so
-      // there's nothing to copy, so calling EmitLiteral once is
-      // necessary.  And we only start a new iteration when the
-      // current iteration has determined that a call to EmitLiteral will
-      // precede the next call to EmitCopy (if any).
-      //
-      // Step 1: Scan forward in the input looking for a 4-byte-long match.
-      // If we get close to exhausting the input then goto emit_remainder.
-      //
-      // Heuristic match skipping: If 32 bytes are scanned with no matches
-      // found, start looking only at every other byte. If 32 more bytes are
-      // scanned (or skipped), look at every third byte, etc.. When a match is
-      // found, immediately go back to looking at every byte. This is a small
-      // loss (~5% performance, ~0.1% density) for compressible data due to more
-      // bookkeeping, but for non-compressible data (such as JPEG) it's a huge
-      // win since the compressor quickly "realizes" the data is incompressible
-      // and doesn't bother looking for matches everywhere.
-      //
-      // The "skip" variable keeps track of how many bytes there are since the
-      // last match; dividing it by 32 (ie. right-shifting by five) gives the
-      // number of bytes to move ahead for each iteration.
-      uint32_t skip = 32;
-
-      const char* candidate;
-      if (ip_limit - ip >= 16) {
-        auto delta = ip - base_ip;
-        for (int j = 0; j < 4; ++j) {
-          for (int k = 0; k < 4; ++k) {
-            int i = 4 * j + k;
-            // These for-loops are meant to be unrolled. So we can freely
-            // special case the first iteration to use the value already
-            // loaded in preload.
-            uint32_t dword = i == 0 ? preload : static_cast<uint32_t>(data);
-            assert(dword == LittleEndian::Load32(ip + i));
-            uint16_t* table_entry = TableEntry(table, dword, mask);
-            candidate = base_ip + *table_entry;
-            assert(candidate >= base_ip);
-            assert(candidate < ip + i);
-            *table_entry = delta + i;
-            if (SNAPPY_PREDICT_FALSE(LittleEndian::Load32(candidate) == dword)) {
-              *op = LITERAL | (i << 2);
-              UnalignedCopy128(next_emit, op + 1);
-              ip += i;
-              op = op + i + 2;
-              goto emit_match;
-            }
-            data >>= 8;
-          }
-          data = LittleEndian::Load64(ip + 4 * j + 4);
-        }
-        ip += 16;
-        skip += 16;
-      }
-      while (true) {
-        assert(static_cast<uint32_t>(data) == LittleEndian::Load32(ip));
-        uint16_t* table_entry = TableEntry(table, data, mask);
-        uint32_t bytes_between_hash_lookups = skip >> 5;
-        skip += bytes_between_hash_lookups;
-        const char* next_ip = ip + bytes_between_hash_lookups;
-        if (SNAPPY_PREDICT_FALSE(next_ip > ip_limit)) {
-          ip = next_emit;
-          goto emit_remainder;
-        }
-        candidate = base_ip + *table_entry;
-        assert(candidate >= base_ip);
-        assert(candidate < ip);
-
-        *table_entry = ip - base_ip;
-        if (SNAPPY_PREDICT_FALSE(static_cast<uint32_t>(data) ==
-                                LittleEndian::Load32(candidate))) {
-          break;
-        }
-        data = LittleEndian::Load32(next_ip);
-        ip = next_ip;
-      }
-
-      // Step 2: A 4-byte match has been found.  We'll later see if more
-      // than 4 bytes match.  But, prior to the match, input
-      // bytes [next_emit, ip) are unmatched.  Emit them as "literal bytes."
-      assert(next_emit + 16 <= ip_end);
-      op = EmitLiteral</*allow_fast_path=*/true>(op, next_emit, ip - next_emit);
-
-      // Step 3: Call EmitCopy, and then see if another EmitCopy could
-      // be our next move.  Repeat until we find no match for the
-      // input immediately after what was consumed by the last EmitCopy call.
-      //
-      // If we exit this loop normally then we need to call EmitLiteral next,
-      // though we don't yet know how big the literal will be.  We handle that
-      // by proceeding to the next iteration of the main loop.  We also can exit
-      // this loop via goto if we get close to exhausting the input.
-    emit_match:
-      do {
-        // We have a 4-byte match at ip, and no need to emit any
-        // "literal bytes" prior to ip.
-        const char* base = ip;
-        std::pair<size_t, bool> p =
-            FindMatchLength(candidate + 4, ip + 4, ip_end, &data);
-        size_t matched = 4 + p.first;
-        ip += matched;
-        size_t offset = base - candidate;
-        assert(0 == memcmp(base, candidate, matched));
-        if (p.second) {
-          op = EmitCopy</*len_less_than_12=*/true>(op, offset, matched);
-        } else {
-          op = EmitCopy</*len_less_than_12=*/false>(op, offset, matched);
-        }
-        if (SNAPPY_PREDICT_FALSE(ip >= ip_limit)) {
-          goto emit_remainder;
-        }
-        // Expect 5 bytes to match
-        assert((data & 0xFFFFFFFFFF) ==
-               (LittleEndian::Load64(ip) & 0xFFFFFFFFFF));
-        // We are now looking for a 4-byte match again.  We read
-        // table[Hash(ip, mask)] for that.  To improve compression,
-        // we also update table[Hash(ip - 1, mask)] and table[Hash(ip, mask)].
-        *TableEntry(table, LittleEndian::Load32(ip - 1), mask) =
-            ip - base_ip - 1;
-        uint16_t* table_entry = TableEntry(table, data, mask);
-        candidate = base_ip + *table_entry;
-        *table_entry = ip - base_ip;
-        // Measurements on the benchmarks have shown the following probabilities
-        // for the loop to exit (ie. avg. number of iterations is reciprocal).
-        // BM_Flat/6  txt1    p = 0.3-0.4
-        // BM_Flat/7  txt2    p = 0.35
-        // BM_Flat/8  txt3    p = 0.3-0.4
-        // BM_Flat/9  txt3    p = 0.34-0.4
-        // BM_Flat/10 pb      p = 0.4
-        // BM_Flat/11 gaviota p = 0.1
-        // BM_Flat/12 cp      p = 0.5
-        // BM_Flat/13 c       p = 0.3
-      } while (static_cast<uint32_t>(data) == LittleEndian::Load32(candidate));
-      // Because the least significant 5 bytes matched, we can utilize data
-      // for the next iteration.
-      preload = data >> 8;
-    }
-  }
-
-emit_remainder:
-  // Emit the remaining bytes as a literal
-  if (ip < ip_end) {
-    op = EmitLiteral</*allow_fast_path=*/false>(op, ip, ip_end - ip);
-  }
-
-  return op;
-}
-}  // end namespace internal
-
-// Called back at avery compression call to trace parameters and sizes.
-static inline void Report(const char *algorithm, size_t compressed_size,
-                          size_t uncompressed_size) {
-  // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-  (void)algorithm;
-  (void)compressed_size;
-  (void)uncompressed_size;
-}
-
-// Signature of output types needed by decompression code.
-// The decompression code is templatized on a type that obeys this
-// signature so that we do not pay virtual function call overhead in
-// the middle of a tight decompression loop.
-//
-// class DecompressionWriter {
-//  public:
-//   // Called before decompression
-//   void SetExpectedLength(size_t length);
-//
-//   // For performance a writer may choose to donate the cursor variable to the
-//   // decompression function. The decompression will inject it in all its
-//   // function calls to the writer. Keeping the important output cursor as a
-//   // function local stack variable allows the compiler to keep it in
-//   // register, which greatly aids performance by avoiding loads and stores of
-//   // this variable in the fast path loop iterations.
-//   T GetOutputPtr() const;
-//
-//   // At end of decompression the loop donates the ownership of the cursor
-//   // variable back to the writer by calling this function.
-//   void SetOutputPtr(T op);
-//
-//   // Called after decompression
-//   bool CheckLength() const;
-//
-//   // Called repeatedly during decompression
-//   // Each function get a pointer to the op (output pointer), that the writer
-//   // can use and update. Note it's important that these functions get fully
-//   // inlined so that no actual address of the local variable needs to be
-//   // taken.
-//   bool Append(const char* ip, size_t length, T* op);
-//   bool AppendFromSelf(uint32_t offset, size_t length, T* op);
-//
-//   // The rules for how TryFastAppend differs from Append are somewhat
-//   // convoluted:
-//   //
-//   //  - TryFastAppend is allowed to decline (return false) at any
-//   //    time, for any reason -- just "return false" would be
-//   //    a perfectly legal implementation of TryFastAppend.
-//   //    The intention is for TryFastAppend to allow a fast path
-//   //    in the common case of a small append.
-//   //  - TryFastAppend is allowed to read up to <available> bytes
-//   //    from the input buffer, whereas Append is allowed to read
-//   //    <length>. However, if it returns true, it must leave
-//   //    at least five (kMaximumTagLength) bytes in the input buffer
-//   //    afterwards, so that there is always enough space to read the
-//   //    next tag without checking for a refill.
-//   //  - TryFastAppend must always return decline (return false)
-//   //    if <length> is 61 or more, as in this case the literal length is not
-//   //    decoded fully. In practice, this should not be a big problem,
-//   //    as it is unlikely that one would implement a fast path accepting
-//   //    this much data.
-//   //
-//   bool TryFastAppend(const char* ip, size_t available, size_t length, T* op);
-// };
-
-static inline uint32_t ExtractLowBytes(const uint32_t& v, int n) {
-  assert(n >= 0);
-  assert(n <= 4);
-#if SNAPPY_HAVE_BMI2
-  return _bzhi_u32(v, 8 * n);
-#else
-  // This needs to be wider than uint32_t otherwise `mask << 32` will be
-  // undefined.
-  uint64_t mask = 0xffffffff;
-  return v & ~(mask << (8 * n));
-#endif
-}
-
-static inline bool LeftShiftOverflows(uint8_t value, uint32_t shift) {
-  assert(shift < 32);
-  static const uint8_t masks[] = {
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  //
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  //
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  //
-      0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe};
-  return (value & masks[shift]) != 0;
-}
-
-inline bool Copy64BytesWithPatternExtension(ptrdiff_t dst, size_t offset) {
-  // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-  (void)dst;
-  return offset != 0;
-}
-
-// Copies between size bytes and 64 bytes from src to dest.  size cannot exceed
-// 64.  More than size bytes, but never exceeding 64, might be copied if doing
-// so gives better performance.  [src, src + size) must not overlap with
-// [dst, dst + size), but [src, src + 64) may overlap with [dst, dst + 64).
-void MemCopy64(char* dst, const void* src, size_t size) {
-  // Always copy this many bytes.  If that's below size then copy the full 64.
-  constexpr int kShortMemCopy = 32;
-
-  assert(size <= 64);
-  assert(std::less_equal<const void*>()(static_cast<const char*>(src) + size,
-                                        dst) ||
-         std::less_equal<const void*>()(dst + size, src));
-
-  // We know that src and dst are at least size bytes apart. However, because we
-  // might copy more than size bytes the copy still might overlap past size.
-  // E.g. if src and dst appear consecutively in memory (src + size >= dst).
-  // TODO: Investigate wider copies on other platforms.
-#if defined(__x86_64__) && defined(__AVX__)
-  assert(kShortMemCopy <= 32);
-  __m256i data = _mm256_lddqu_si256(static_cast<const __m256i *>(src));
-  _mm256_storeu_si256(reinterpret_cast<__m256i *>(dst), data);
-  // Profiling shows that nearly all copies are short.
-  if (SNAPPY_PREDICT_FALSE(size > kShortMemCopy)) {
-    data = _mm256_lddqu_si256(static_cast<const __m256i *>(src) + 1);
-    _mm256_storeu_si256(reinterpret_cast<__m256i *>(dst) + 1, data);
-  }
-#else
-  std::memmove(dst, src, kShortMemCopy);
-  // Profiling shows that nearly all copies are short.
-  if (SNAPPY_PREDICT_FALSE(size > kShortMemCopy)) {
-    std::memmove(dst + kShortMemCopy,
-                 static_cast<const uint8_t*>(src) + kShortMemCopy,
-                 64 - kShortMemCopy);
-  }
-#endif
-}
-
-void MemCopy64(ptrdiff_t dst, const void* src, size_t size) {
-  // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-  (void)dst;
-  (void)src;
-  (void)size;
-}
-
-void ClearDeferred(const void** deferred_src, size_t* deferred_length,
-                   uint8_t* safe_source) {
-  *deferred_src = safe_source;
-  *deferred_length = 0;
-}
-
-void DeferMemCopy(const void** deferred_src, size_t* deferred_length,
-                  const void* src, size_t length) {
-  *deferred_src = src;
-  *deferred_length = length;
-}
-
-SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-inline size_t AdvanceToNextTagARMOptimized(const uint8_t** ip_p, size_t* tag) {
-  const uint8_t*& ip = *ip_p;
-  // This section is crucial for the throughput of the decompression loop.
-  // The latency of an iteration is fundamentally constrained by the
-  // following data chain on ip.
-  // ip -> c = Load(ip) -> delta1 = (c & 3)        -> ip += delta1 or delta2
-  //                       delta2 = ((c >> 2) + 1)    ip++
-  // This is different from X86 optimizations because ARM has conditional add
-  // instruction (csinc) and it removes several register moves.
-  const size_t tag_type = *tag & 3;
-  const bool is_literal = (tag_type == 0);
-  if (is_literal) {
-    size_t next_literal_tag = (*tag >> 2) + 1;
-    *tag = ip[next_literal_tag];
-    ip += next_literal_tag + 1;
-  } else {
-    *tag = ip[tag_type];
-    ip += tag_type + 1;
-  }
-  return tag_type;
-}
-
-SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-inline size_t AdvanceToNextTagX86Optimized(const uint8_t** ip_p, size_t* tag) {
-  const uint8_t*& ip = *ip_p;
-  // This section is crucial for the throughput of the decompression loop.
-  // The latency of an iteration is fundamentally constrained by the
-  // following data chain on ip.
-  // ip -> c = Load(ip) -> ip1 = ip + 1 + (c & 3) -> ip = ip1 or ip2
-  //                       ip2 = ip + 2 + (c >> 2)
-  // This amounts to 8 cycles.
-  // 5 (load) + 1 (c & 3) + 1 (lea ip1, [ip + (c & 3) + 1]) + 1 (cmov)
-  size_t literal_len = *tag >> 2;
-  size_t tag_type = *tag;
-  bool is_literal;
-#if defined(__GCC_ASM_FLAG_OUTPUTS__) && defined(__x86_64__)
-  // TODO clang misses the fact that the (c & 3) already correctly
-  // sets the zero flag.
-  asm("and $3, %k[tag_type]\n\t"
-      : [tag_type] "+r"(tag_type), "=@ccz"(is_literal)
-      :: "cc");
-#else
-  tag_type &= 3;
-  is_literal = (tag_type == 0);
-#endif
-  // TODO
-  // This is code is subtle. Loading the values first and then cmov has less
-  // latency then cmov ip and then load. However clang would move the loads
-  // in an optimization phase, volatile prevents this transformation.
-  // Note that we have enough slop bytes (64) that the loads are always valid.
-  size_t tag_literal =
-      static_cast<const volatile uint8_t*>(ip)[1 + literal_len];
-  size_t tag_copy = static_cast<const volatile uint8_t*>(ip)[tag_type];
-  *tag = is_literal ? tag_literal : tag_copy;
-  const uint8_t* ip_copy = ip + 1 + tag_type;
-  const uint8_t* ip_literal = ip + 2 + literal_len;
-  ip = is_literal ? ip_literal : ip_copy;
-#if defined(__GNUC__) && defined(__x86_64__)
-  // TODO Clang is "optimizing" zero-extension (a totally free
-  // operation) this means that after the cmov of tag, it emits another movzb
-  // tag, byte(tag). It really matters as it's on the core chain. This dummy
-  // asm, persuades clang to do the zero-extension at the load (it's automatic)
-  // removing the expensive movzb.
-  asm("" ::"r"(tag_copy));
-#endif
-  return tag_type;
-}
-
-// Extract the offset for copy-1 and copy-2 returns 0 for literals or copy-4.
-inline uint32_t ExtractOffset(uint32_t val, size_t tag_type) {
-  // For x86 non-static storage works better. For ARM static storage is better.
-  // TODO: Once the array is recognized as a register, improve the
-  // readability for x86.
-#if defined(__x86_64__)
-  constexpr uint64_t kExtractMasksCombined = 0x0000FFFF00FF0000ull;
-  uint16_t result;
-  memcpy(&result,
-         reinterpret_cast<const char*>(&kExtractMasksCombined) + 2 * tag_type,
-         sizeof(result));
-  return val & result;
-#elif defined(__aarch64__)
-  constexpr uint64_t kExtractMasksCombined = 0x0000FFFF00FF0000ull;
-  return val & static_cast<uint32_t>(
-      (kExtractMasksCombined >> (tag_type * 16)) & 0xFFFF);
-#else
-  static constexpr uint32_t kExtractMasks[4] = {0, 0xFF, 0xFFFF, 0};
-  return val & kExtractMasks[tag_type];
-#endif
-};
-
-// Core decompression loop, when there is enough data available.
-// Decompresses the input buffer [ip, ip_limit) into the output buffer
-// [op, op_limit_min_slop). Returning when either we are too close to the end
-// of the input buffer, or we exceed op_limit_min_slop or when a exceptional
-// tag is encountered (literal of length > 60) or a copy-4.
-// Returns {ip, op} at the points it stopped decoding.
-// TODO This function probably does not need to be inlined, as it
-// should decode large chunks at a time. This allows runtime dispatch to
-// implementations based on CPU capability (BMI2 / perhaps 32 / 64 byte memcpy).
-template <typename T>
-std::pair<const uint8_t*, ptrdiff_t> DecompressBranchless(
-    const uint8_t* ip, const uint8_t* ip_limit, ptrdiff_t op, T op_base,
-    ptrdiff_t op_limit_min_slop) {
-  // If deferred_src is invalid point it here.
-  uint8_t safe_source[64];
-  const void* deferred_src;
-  size_t deferred_length;
-  ClearDeferred(&deferred_src, &deferred_length, safe_source);
-
-  // We unroll the inner loop twice so we need twice the spare room.
-  op_limit_min_slop -= kSlopBytes;
-  if (2 * (kSlopBytes + 1) < ip_limit - ip && op < op_limit_min_slop) {
-    const uint8_t* const ip_limit_min_slop = ip_limit - 2 * kSlopBytes - 1;
-    ip++;
-    // ip points just past the tag and we are touching at maximum kSlopBytes
-    // in an iteration.
-    size_t tag = ip[-1];
-#if defined(__clang__) && defined(__aarch64__)
-    // Workaround for https://bugs.llvm.org/show_bug.cgi?id=51317
-    // when loading 1 byte, clang for aarch64 doesn't realize that it(ldrb)
-    // comes with free zero-extension, so clang generates another
-    // 'and xn, xm, 0xff' before it use that as the offset. This 'and' is
-    // redundant and can be removed by adding this dummy asm, which gives
-    // clang a hint that we're doing the zero-extension at the load.
-    asm("" ::"r"(tag));
-#endif
-    do {
-      // The throughput is limited by instructions, unrolling the inner loop
-      // twice reduces the amount of instructions checking limits and also
-      // leads to reduced mov's.
-
-      SNAPPY_PREFETCH(ip + 128);
-      for (int i = 0; i < 2; i++) {
-        const uint8_t* old_ip = ip;
-        assert(tag == ip[-1]);
-        // For literals tag_type = 0, hence we will always obtain 0 from
-        // ExtractLowBytes. For literals offset will thus be kLiteralOffset.
-        ptrdiff_t len_min_offset = kLengthMinusOffset[tag];
-#if defined(__aarch64__)
-        size_t tag_type = AdvanceToNextTagARMOptimized(&ip, &tag);
-#else
-        size_t tag_type = AdvanceToNextTagX86Optimized(&ip, &tag);
-#endif
-        uint32_t next = LittleEndian::Load32(old_ip);
-        size_t len = len_min_offset & 0xFF;
-        len_min_offset -= ExtractOffset(next, tag_type);
-        if (SNAPPY_PREDICT_FALSE(len_min_offset > 0)) {
-          if (SNAPPY_PREDICT_FALSE(len & 0x80)) {
-            // Exceptional case (long literal or copy 4).
-            // Actually doing the copy here is negatively impacting the main
-            // loop due to compiler incorrectly allocating a register for
-            // this fallback. Hence we just break.
-          break_loop:
-            ip = old_ip;
-            goto exit;
-          }
-          // Only copy-1 or copy-2 tags can get here.
-          assert(tag_type == 1 || tag_type == 2);
-          std::ptrdiff_t delta = (op + deferred_length) + len_min_offset - len;
-          // Guard against copies before the buffer start.
-          // Execute any deferred MemCopy since we write to dst here.
-          MemCopy64(op_base + op, deferred_src, deferred_length);
-          op += deferred_length;
-          ClearDeferred(&deferred_src, &deferred_length, safe_source);
-          if (SNAPPY_PREDICT_FALSE(delta < 0 ||
-                                  !Copy64BytesWithPatternExtension(
-                                      op_base + op, len - len_min_offset))) {
-            goto break_loop;
-          }
-          // We aren't deferring this copy so add length right away.
-          op += len;
-          continue;
-        }
-        std::ptrdiff_t delta = (op + deferred_length) + len_min_offset - len;
-        if (SNAPPY_PREDICT_FALSE(delta < 0)) {
-          // Due to the spurious offset in literals have this will trigger
-          // at the start of a block when op is still smaller than 256.
-          if (tag_type != 0) goto break_loop;
-          MemCopy64(op_base + op, deferred_src, deferred_length);
-          op += deferred_length;
-          DeferMemCopy(&deferred_src, &deferred_length, old_ip, len);
-          continue;
-        }
-
-        // For copies we need to copy from op_base + delta, for literals
-        // we need to copy from ip instead of from the stream.
-        const void* from =
-            tag_type ? reinterpret_cast<void*>(op_base + delta) : old_ip;
-        MemCopy64(op_base + op, deferred_src, deferred_length);
-        op += deferred_length;
-        DeferMemCopy(&deferred_src, &deferred_length, from, len);
-      }
-    } while (ip < ip_limit_min_slop &&
-             (op + deferred_length) < op_limit_min_slop);
-  exit:
-    ip--;
-    assert(ip <= ip_limit);
-  }
-  // If we deferred a copy then we can perform.  If we are up to date then we
-  // might not have enough slop bytes and could run past the end.
-  if (deferred_length) {
-    MemCopy64(op_base + op, deferred_src, deferred_length);
-    op += deferred_length;
-    ClearDeferred(&deferred_src, &deferred_length, safe_source);
-  }
-  return {ip, op};
-}
-
-// Helper class for decompression
-class SnappyDecompressor {
- private:
-  Source* reader_;        // Underlying source of bytes to decompress
-  const char* ip_;        // Points to next buffered byte
-  const char* ip_limit_;  // Points just past buffered bytes
-  // If ip < ip_limit_min_maxtaglen_ it's safe to read kMaxTagLength from
-  // buffer.
-  const char* ip_limit_min_maxtaglen_;
-  uint32_t peeked_;                  // Bytes peeked from reader (need to skip)
-  bool eof_;                         // Hit end of input without an error?
-  char scratch_[kMaximumTagLength];  // See RefillTag().
-
-  // Ensure that all of the tag metadata for the next tag is available
-  // in [ip_..ip_limit_-1].  Also ensures that [ip,ip+4] is readable even
-  // if (ip_limit_ - ip_ < 5).
-  //
-  // Returns true on success, false on error or end of input.
-  bool RefillTag();
-
-  void ResetLimit(const char* ip) {
-    ip_limit_min_maxtaglen_ =
-        ip_limit_ - std::min<ptrdiff_t>(ip_limit_ - ip, kMaximumTagLength - 1);
-  }
-
- public:
-  explicit SnappyDecompressor(Source* reader)
-      : reader_(reader), ip_(NULL), ip_limit_(NULL), peeked_(0), eof_(false) {}
-
-  ~SnappyDecompressor() {
-    // Advance past any bytes we peeked at from the reader
-    reader_->Skip(peeked_);
-  }
-
-  // Returns true iff we have hit the end of the input without an error.
-  bool eof() const { return eof_; }
-
-  // Read the uncompressed length stored at the start of the compressed data.
-  // On success, stores the length in *result and returns true.
-  // On failure, returns false.
-  bool ReadUncompressedLength(uint32_t* result) {
-    assert(ip_ == NULL);  // Must not have read anything yet
-    // Length is encoded in 1..5 bytes
-    *result = 0;
-    uint32_t shift = 0;
-    while (true) {
-      if (shift >= 32) return false;
-      size_t n;
-      const char* ip = reader_->Peek(&n);
-      if (n == 0) return false;
-      const unsigned char c = *(reinterpret_cast<const unsigned char*>(ip));
-      reader_->Skip(1);
-      uint32_t val = c & 0x7f;
-      if (LeftShiftOverflows(static_cast<uint8_t>(val), shift)) return false;
-      *result |= val << shift;
-      if (c < 128) {
-        break;
-      }
-      shift += 7;
-    }
-    return true;
-  }
-
-  // Process the next item found in the input.
-  // Returns true if successful, false on error or end of input.
-  template <class Writer>
-#if defined(__GNUC__) && defined(__x86_64__)
-  __attribute__((aligned(32)))
-#endif
-  void
-  DecompressAllTags(Writer* writer) {
-    const char* ip = ip_;
-    ResetLimit(ip);
-    auto op = writer->GetOutputPtr();
-    // We could have put this refill fragment only at the beginning of the loop.
-    // However, duplicating it at the end of each branch gives the compiler more
-    // scope to optimize the <ip_limit_ - ip> expression based on the local
-    // context, which overall increases speed.
-#define MAYBE_REFILL()                                      \
-  if (SNAPPY_PREDICT_FALSE(ip >= ip_limit_min_maxtaglen_)) { \
-    ip_ = ip;                                               \
-    if (SNAPPY_PREDICT_FALSE(!RefillTag())) goto exit;       \
-    ip = ip_;                                               \
-    ResetLimit(ip);                                         \
-  }                                                         \
-  preload = static_cast<uint8_t>(*ip)
-
-    // At the start of the for loop below the least significant byte of preload
-    // contains the tag.
-    uint32_t preload;
-    MAYBE_REFILL();
-    for (;;) {
-      {
-        ptrdiff_t op_limit_min_slop;
-        auto op_base = writer->GetBase(&op_limit_min_slop);
-        if (op_base) {
-          auto res =
-              DecompressBranchless(reinterpret_cast<const uint8_t*>(ip),
-                                   reinterpret_cast<const uint8_t*>(ip_limit_),
-                                   op - op_base, op_base, op_limit_min_slop);
-          ip = reinterpret_cast<const char*>(res.first);
-          op = op_base + res.second;
-          MAYBE_REFILL();
-        }
-      }
-      const uint8_t c = static_cast<uint8_t>(preload);
-      ip++;
-
-      // Ratio of iterations that have LITERAL vs non-LITERAL for different
-      // inputs.
-      //
-      // input          LITERAL  NON_LITERAL
-      // -----------------------------------
-      // html|html4|cp   23%        77%
-      // urls            36%        64%
-      // jpg             47%        53%
-      // pdf             19%        81%
-      // txt[1-4]        25%        75%
-      // pb              24%        76%
-      // bin             24%        76%
-      if (SNAPPY_PREDICT_FALSE((c & 0x3) == LITERAL)) {
-        size_t literal_length = (c >> 2) + 1u;
-        if (writer->TryFastAppend(ip, ip_limit_ - ip, literal_length, &op)) {
-          assert(literal_length < 61);
-          ip += literal_length;
-          // NOTE: There is no MAYBE_REFILL() here, as TryFastAppend()
-          // will not return true unless there's already at least five spare
-          // bytes in addition to the literal.
-          preload = static_cast<uint8_t>(*ip);
-          continue;
-        }
-        if (SNAPPY_PREDICT_FALSE(literal_length >= 61)) {
-          // Long literal.
-          const size_t literal_length_length = literal_length - 60;
-          literal_length =
-              ExtractLowBytes(LittleEndian::Load32(ip), literal_length_length) +
-              1;
-          ip += literal_length_length;
-        }
-
-        size_t avail = ip_limit_ - ip;
-        while (avail < literal_length) {
-          if (!writer->Append(ip, avail, &op)) goto exit;
-          literal_length -= avail;
-          reader_->Skip(peeked_);
-          size_t n;
-          ip = reader_->Peek(&n);
-          avail = n;
-          peeked_ = avail;
-          if (avail == 0) goto exit;
-          ip_limit_ = ip + avail;
-          ResetLimit(ip);
-        }
-        if (!writer->Append(ip, literal_length, &op)) goto exit;
-        ip += literal_length;
-        MAYBE_REFILL();
-      } else {
-        if (SNAPPY_PREDICT_FALSE((c & 3) == COPY_4_BYTE_OFFSET)) {
-          const size_t copy_offset = LittleEndian::Load32(ip);
-          const size_t length = (c >> 2) + 1;
-          ip += 4;
-
-          if (!writer->AppendFromSelf(copy_offset, length, &op)) goto exit;
-        } else {
-          const ptrdiff_t entry = kLengthMinusOffset[c];
-          preload = LittleEndian::Load32(ip);
-          const uint32_t trailer = ExtractLowBytes(preload, c & 3);
-          const uint32_t length = entry & 0xff;
-          assert(length > 0);
-
-          // copy_offset/256 is encoded in bits 8..10.  By just fetching
-          // those bits, we get copy_offset (since the bit-field starts at
-          // bit 8).
-          const uint32_t copy_offset = trailer - entry + length;
-          if (!writer->AppendFromSelf(copy_offset, length, &op)) goto exit;
-
-          ip += (c & 3);
-          // By using the result of the previous load we reduce the critical
-          // dependency chain of ip to 4 cycles.
-          preload >>= (c & 3) * 8;
-          if (ip < ip_limit_min_maxtaglen_) continue;
-        }
-        MAYBE_REFILL();
-      }
-    }
-#undef MAYBE_REFILL
-  exit:
-    writer->SetOutputPtr(op);
-  }
-};
-
-constexpr uint32_t CalculateNeeded(uint8_t tag) {
-  return ((tag & 3) == 0 && tag >= (60 * 4))
-             ? (tag >> 2) - 58
-             : (0x05030201 >> ((tag * 8) & 31)) & 0xFF;
-}
-
-#if __cplusplus >= 201402L
-constexpr bool VerifyCalculateNeeded() {
-  for (int i = 0; i < 1; i++) {
-    if (CalculateNeeded(i) != (char_table[i] >> 11) + 1) return false;
-  }
-  return true;
-}
-
-// Make sure CalculateNeeded is correct by verifying it against the established
-// table encoding the number of added bytes needed.
-static_assert(VerifyCalculateNeeded(), "");
-#endif  // c++14
-
-bool SnappyDecompressor::RefillTag() {
-  const char* ip = ip_;
-  if (ip == ip_limit_) {
-    // Fetch a new fragment from the reader
-    reader_->Skip(peeked_);  // All peeked bytes are used up
-    size_t n;
-    ip = reader_->Peek(&n);
-    peeked_ = n;
-    eof_ = (n == 0);
-    if (eof_) return false;
-    ip_limit_ = ip + n;
-  }
-
-  // Read the tag character
-  assert(ip < ip_limit_);
-  const unsigned char c = *(reinterpret_cast<const unsigned char*>(ip));
-  // At this point make sure that the data for the next tag is consecutive.
-  // For copy 1 this means the next 2 bytes (tag and 1 byte offset)
-  // For copy 2 the next 3 bytes (tag and 2 byte offset)
-  // For copy 4 the next 5 bytes (tag and 4 byte offset)
-  // For all small literals we only need 1 byte buf for literals 60...63 the
-  // length is encoded in 1...4 extra bytes.
-  const uint32_t needed = CalculateNeeded(c);
-  assert(needed <= sizeof(scratch_));
-
-  // Read more bytes from reader if needed
-  uint32_t nbuf = ip_limit_ - ip;
-  if (nbuf < needed) {
-    // Stitch together bytes from ip and reader to form the word
-    // contents.  We store the needed bytes in "scratch_".  They
-    // will be consumed immediately by the caller since we do not
-    // read more than we need.
-    std::memmove(scratch_, ip, nbuf);
-    reader_->Skip(peeked_);  // All peeked bytes are used up
-    peeked_ = 0;
-    while (nbuf < needed) {
-      size_t length;
-      const char* src = reader_->Peek(&length);
-      if (length == 0) return false;
-      uint32_t to_add = std::min<uint32_t>(needed - nbuf, length);
-      std::memcpy(scratch_ + nbuf, src, to_add);
-      nbuf += to_add;
-      reader_->Skip(to_add);
-    }
-    assert(nbuf == needed);
-    ip_ = scratch_;
-    ip_limit_ = scratch_ + needed;
-  } else if (nbuf < kMaximumTagLength) {
-    // Have enough bytes, but move into scratch_ so that we do not
-    // read past end of input
-    std::memmove(scratch_, ip, nbuf);
-    reader_->Skip(peeked_);  // All peeked bytes are used up
-    peeked_ = 0;
-    ip_ = scratch_;
-    ip_limit_ = scratch_ + nbuf;
-  } else {
-    // Pass pointer to buffer returned by reader_.
-    ip_ = ip;
-  }
-  return true;
-}
-
-template <typename Writer>
-static bool InternalUncompress(Source* r, Writer* writer) {
-  // Read the uncompressed length from the front of the compressed input
-  SnappyDecompressor decompressor(r);
-  uint32_t uncompressed_len = 0;
-  if (!decompressor.ReadUncompressedLength(&uncompressed_len)) return false;
-
-  return InternalUncompressAllTags(&decompressor, writer, r->Available(),
-                                   uncompressed_len);
-}
-
-template <typename Writer>
-static bool InternalUncompressAllTags(SnappyDecompressor* decompressor,
-                                      Writer* writer, uint32_t compressed_len,
-                                      uint32_t uncompressed_len) {
-  Report("snappy_uncompress", compressed_len, uncompressed_len);
-
-  writer->SetExpectedLength(uncompressed_len);
-
-  // Process the entire input
-  decompressor->DecompressAllTags(writer);
-  writer->Flush();
-  return (decompressor->eof() && writer->CheckLength());
-}
-
-bool GetUncompressedLength(Source* source, uint32_t* result) {
-  SnappyDecompressor decompressor(source);
-  return decompressor.ReadUncompressedLength(result);
-}
-
-size_t Compress(Source* reader, Sink* writer) {
-  size_t written = 0;
-  size_t N = reader->Available();
-  const size_t uncompressed_size = N;
-  char ulength[Varint::kMax32];
-  char* p = Varint::Encode32(ulength, N);
-  writer->Append(ulength, p - ulength);
-  written += (p - ulength);
-
-  internal::WorkingMemory wmem(N);
-
-  while (N > 0) {
-    // Get next block to compress (without copying if possible)
-    size_t fragment_size;
-    const char* fragment = reader->Peek(&fragment_size);
-    assert(fragment_size != 0);  // premature end of input
-    const size_t num_to_read = std::min(N, kBlockSize);
-    size_t bytes_read = fragment_size;
-
-    size_t pending_advance = 0;
-    if (bytes_read >= num_to_read) {
-      // Buffer returned by reader is large enough
-      pending_advance = num_to_read;
-      fragment_size = num_to_read;
-    } else {
-      char* scratch = wmem.GetScratchInput();
-      std::memcpy(scratch, fragment, bytes_read);
-      reader->Skip(bytes_read);
-
-      while (bytes_read < num_to_read) {
-        fragment = reader->Peek(&fragment_size);
-        size_t n = std::min<size_t>(fragment_size, num_to_read - bytes_read);
-        std::memcpy(scratch + bytes_read, fragment, n);
-        bytes_read += n;
-        reader->Skip(n);
-      }
-      assert(bytes_read == num_to_read);
-      fragment = scratch;
-      fragment_size = num_to_read;
-    }
-    assert(fragment_size == num_to_read);
-
-    // Get encoding table for compression
-    int table_size;
-    uint16_t* table = wmem.GetHashTable(num_to_read, &table_size);
-
-    // Compress input_fragment and append to dest
-    const int max_output = MaxCompressedLength(num_to_read);
-
-    // Need a scratch buffer for the output, in case the byte sink doesn't
-    // have room for us directly.
-
-    // Since we encode kBlockSize regions followed by a region
-    // which is <= kBlockSize in length, a previously allocated
-    // scratch_output[] region is big enough for this iteration.
-    char* dest = writer->GetAppendBuffer(max_output, wmem.GetScratchOutput());
-    char* end = internal::CompressFragment(fragment, fragment_size, dest, table,
-                                           table_size);
-    writer->Append(dest, end - dest);
-    written += (end - dest);
-
-    N -= num_to_read;
-    reader->Skip(pending_advance);
-  }
-
-  Report("snappy_compress", written, uncompressed_size);
-
-  return written;
-}
-
-// -----------------------------------------------------------------------
-// IOVec interfaces
-// -----------------------------------------------------------------------
-
-// A `Source` implementation that yields the contents of an `iovec` array. Note
-// that `total_size` is the total number of bytes to be read from the elements
-// of `iov` (_not_ the total number of elements in `iov`).
-class SnappyIOVecReader : public Source {
- public:
-  SnappyIOVecReader(const struct iovec* iov, size_t total_size)
-      : curr_iov_(iov),
-        curr_pos_(total_size > 0 ? reinterpret_cast<const char*>(iov->iov_base)
-                                 : nullptr),
-        curr_size_remaining_(total_size > 0 ? iov->iov_len : 0),
-        total_size_remaining_(total_size) {
-    // Skip empty leading `iovec`s.
-    if (total_size > 0 && curr_size_remaining_ == 0) Advance();
-  }
-
-  ~SnappyIOVecReader() = default;
-
-  size_t Available() const { return total_size_remaining_; }
-
-  const char* Peek(size_t* len) {
-    *len = curr_size_remaining_;
-    return curr_pos_;
-  }
-
-  void Skip(size_t n) {
-    while (n >= curr_size_remaining_ && n > 0) {
-      n -= curr_size_remaining_;
-      Advance();
-    }
-    curr_size_remaining_ -= n;
-    total_size_remaining_ -= n;
-    curr_pos_ += n;
-  }
-
- private:
-  // Advances to the next nonempty `iovec` and updates related variables.
-  void Advance() {
-    do {
-      assert(total_size_remaining_ >= curr_size_remaining_);
-      total_size_remaining_ -= curr_size_remaining_;
-      if (total_size_remaining_ == 0) {
-        curr_pos_ = nullptr;
-        curr_size_remaining_ = 0;
-        return;
-      }
-      ++curr_iov_;
-      curr_pos_ = reinterpret_cast<const char*>(curr_iov_->iov_base);
-      curr_size_remaining_ = curr_iov_->iov_len;
-    } while (curr_size_remaining_ == 0);
-  }
-
-  // The `iovec` currently being read.
-  const struct iovec* curr_iov_;
-  // The location in `curr_iov_` currently being read.
-  const char* curr_pos_;
-  // The amount of unread data in `curr_iov_`.
-  size_t curr_size_remaining_;
-  // The amount of unread data in the entire input array.
-  size_t total_size_remaining_;
-};
-
-// A type that writes to an iovec.
-// Note that this is not a "ByteSink", but a type that matches the
-// Writer template argument to SnappyDecompressor::DecompressAllTags().
-class SnappyIOVecWriter {
- private:
-  // output_iov_end_ is set to iov + count and used to determine when
-  // the end of the iovs is reached.
-  const struct iovec* output_iov_end_;
-
-#if !defined(NDEBUG)
-  const struct iovec* output_iov_;
-#endif  // !defined(NDEBUG)
-
-  // Current iov that is being written into.
-  const struct iovec* curr_iov_;
-
-  // Pointer to current iov's write location.
-  char* curr_iov_output_;
-
-  // Remaining bytes to write into curr_iov_output.
-  size_t curr_iov_remaining_;
-
-  // Total bytes decompressed into output_iov_ so far.
-  size_t total_written_;
-
-  // Maximum number of bytes that will be decompressed into output_iov_.
-  size_t output_limit_;
-
-  static inline char* GetIOVecPointer(const struct iovec* iov, size_t offset) {
-    return reinterpret_cast<char*>(iov->iov_base) + offset;
-  }
-
- public:
-  // Does not take ownership of iov. iov must be valid during the
-  // entire lifetime of the SnappyIOVecWriter.
-  inline SnappyIOVecWriter(const struct iovec* iov, size_t iov_count)
-      : output_iov_end_(iov + iov_count),
-#if !defined(NDEBUG)
-        output_iov_(iov),
-#endif  // !defined(NDEBUG)
-        curr_iov_(iov),
-        curr_iov_output_(iov_count ? reinterpret_cast<char*>(iov->iov_base)
-                                   : nullptr),
-        curr_iov_remaining_(iov_count ? iov->iov_len : 0),
-        total_written_(0),
-        output_limit_(-1) {
-  }
-
-  inline void SetExpectedLength(size_t len) { output_limit_ = len; }
-
-  inline bool CheckLength() const { return total_written_ == output_limit_; }
-
-  inline bool Append(const char* ip, size_t len, char**) {
-    if (total_written_ + len > output_limit_) {
-      return false;
-    }
-
-    return AppendNoCheck(ip, len);
-  }
-
-  char* GetOutputPtr() { return nullptr; }
-  char* GetBase(ptrdiff_t*) { return nullptr; }
-  void SetOutputPtr(char* op) {
-    // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-    (void)op;
-  }
-
-  inline bool AppendNoCheck(const char* ip, size_t len) {
-    while (len > 0) {
-      if (curr_iov_remaining_ == 0) {
-        // This iovec is full. Go to the next one.
-        if (curr_iov_ + 1 >= output_iov_end_) {
-          return false;
-        }
-        ++curr_iov_;
-        curr_iov_output_ = reinterpret_cast<char*>(curr_iov_->iov_base);
-        curr_iov_remaining_ = curr_iov_->iov_len;
-      }
-
-      const size_t to_write = std::min(len, curr_iov_remaining_);
-      std::memcpy(curr_iov_output_, ip, to_write);
-      curr_iov_output_ += to_write;
-      curr_iov_remaining_ -= to_write;
-      total_written_ += to_write;
-      ip += to_write;
-      len -= to_write;
-    }
-
-    return true;
-  }
-
-  inline bool TryFastAppend(const char* ip, size_t available, size_t len,
-                            char**) {
-    const size_t space_left = output_limit_ - total_written_;
-    if (len <= 16 && available >= 16 + kMaximumTagLength && space_left >= 16 &&
-        curr_iov_remaining_ >= 16) {
-      // Fast path, used for the majority (about 95%) of invocations.
-      UnalignedCopy128(ip, curr_iov_output_);
-      curr_iov_output_ += len;
-      curr_iov_remaining_ -= len;
-      total_written_ += len;
-      return true;
-    }
-
-    return false;
-  }
-
-  inline bool AppendFromSelf(size_t offset, size_t len, char**) {
-    // See SnappyArrayWriter::AppendFromSelf for an explanation of
-    // the "offset - 1u" trick.
-    if (offset - 1u >= total_written_) {
-      return false;
-    }
-    const size_t space_left = output_limit_ - total_written_;
-    if (len > space_left) {
-      return false;
-    }
-
-    // Locate the iovec from which we need to start the copy.
-    const iovec* from_iov = curr_iov_;
-    size_t from_iov_offset = curr_iov_->iov_len - curr_iov_remaining_;
-    while (offset > 0) {
-      if (from_iov_offset >= offset) {
-        from_iov_offset -= offset;
-        break;
-      }
-
-      offset -= from_iov_offset;
-      --from_iov;
-#if !defined(NDEBUG)
-      assert(from_iov >= output_iov_);
-#endif  // !defined(NDEBUG)
-      from_iov_offset = from_iov->iov_len;
-    }
-
-    // Copy <len> bytes starting from the iovec pointed to by from_iov_index to
-    // the current iovec.
-    while (len > 0) {
-      assert(from_iov <= curr_iov_);
-      if (from_iov != curr_iov_) {
-        const size_t to_copy =
-            std::min(from_iov->iov_len - from_iov_offset, len);
-        AppendNoCheck(GetIOVecPointer(from_iov, from_iov_offset), to_copy);
-        len -= to_copy;
-        if (len > 0) {
-          ++from_iov;
-          from_iov_offset = 0;
-        }
-      } else {
-        size_t to_copy = curr_iov_remaining_;
-        if (to_copy == 0) {
-          // This iovec is full. Go to the next one.
-          if (curr_iov_ + 1 >= output_iov_end_) {
-            return false;
-          }
-          ++curr_iov_;
-          curr_iov_output_ = reinterpret_cast<char*>(curr_iov_->iov_base);
-          curr_iov_remaining_ = curr_iov_->iov_len;
-          continue;
-        }
-        if (to_copy > len) {
-          to_copy = len;
-        }
-        assert(to_copy > 0);
-
-        IncrementalCopy(GetIOVecPointer(from_iov, from_iov_offset),
-                        curr_iov_output_, curr_iov_output_ + to_copy,
-                        curr_iov_output_ + curr_iov_remaining_);
-        curr_iov_output_ += to_copy;
-        curr_iov_remaining_ -= to_copy;
-        from_iov_offset += to_copy;
-        total_written_ += to_copy;
-        len -= to_copy;
-      }
-    }
-
-    return true;
-  }
-
-  inline void Flush() {}
-};
-
-bool RawUncompressToIOVec(const char* compressed, size_t compressed_length,
-                          const struct iovec* iov, size_t iov_cnt) {
-  ByteArraySource reader(compressed, compressed_length);
-  return RawUncompressToIOVec(&reader, iov, iov_cnt);
-}
-
-bool RawUncompressToIOVec(Source* compressed, const struct iovec* iov,
-                          size_t iov_cnt) {
-  SnappyIOVecWriter output(iov, iov_cnt);
-  return InternalUncompress(compressed, &output);
-}
-
-// -----------------------------------------------------------------------
-// Flat array interfaces
-// -----------------------------------------------------------------------
-
-// A type that writes to a flat array.
-// Note that this is not a "ByteSink", but a type that matches the
-// Writer template argument to SnappyDecompressor::DecompressAllTags().
-class SnappyArrayWriter {
- private:
-  char* base_;
-  char* op_;
-  char* op_limit_;
-  // If op < op_limit_min_slop_ then it's safe to unconditionally write
-  // kSlopBytes starting at op.
-  char* op_limit_min_slop_;
-
- public:
-  inline explicit SnappyArrayWriter(char* dst)
-      : base_(dst),
-        op_(dst),
-        op_limit_(dst),
-        op_limit_min_slop_(dst) {}  // Safe default see invariant.
-
-  inline void SetExpectedLength(size_t len) {
-    op_limit_ = op_ + len;
-    // Prevent pointer from being past the buffer.
-    op_limit_min_slop_ = op_limit_ - std::min<size_t>(kSlopBytes - 1, len);
-  }
-
-  inline bool CheckLength() const { return op_ == op_limit_; }
-
-  char* GetOutputPtr() { return op_; }
-  char* GetBase(ptrdiff_t* op_limit_min_slop) {
-    *op_limit_min_slop = op_limit_min_slop_ - base_;
-    return base_;
-  }
-  void SetOutputPtr(char* op) { op_ = op; }
-
-  inline bool Append(const char* ip, size_t len, char** op_p) {
-    char* op = *op_p;
-    const size_t space_left = op_limit_ - op;
-    if (space_left < len) return false;
-    std::memcpy(op, ip, len);
-    *op_p = op + len;
-    return true;
-  }
-
-  inline bool TryFastAppend(const char* ip, size_t available, size_t len,
-                            char** op_p) {
-    char* op = *op_p;
-    const size_t space_left = op_limit_ - op;
-    if (len <= 16 && available >= 16 + kMaximumTagLength && space_left >= 16) {
-      // Fast path, used for the majority (about 95%) of invocations.
-      UnalignedCopy128(ip, op);
-      *op_p = op + len;
-      return true;
-    } else {
-      return false;
-    }
-  }
-
-  SNAPPY_ATTRIBUTE_ALWAYS_INLINE
-  inline bool AppendFromSelf(size_t offset, size_t len, char** op_p) {
-    assert(len > 0);
-    char* const op = *op_p;
-    assert(op >= base_);
-    char* const op_end = op + len;
-
-    // Check if we try to append from before the start of the buffer.
-    if (SNAPPY_PREDICT_FALSE(static_cast<size_t>(op - base_) < offset))
-      return false;
-
-    if (SNAPPY_PREDICT_FALSE((kSlopBytes < 64 && len > kSlopBytes) ||
-                            op >= op_limit_min_slop_ || offset < len)) {
-      if (op_end > op_limit_ || offset == 0) return false;
-      *op_p = IncrementalCopy(op - offset, op, op_end, op_limit_);
-      return true;
-    }
-    std::memmove(op, op - offset, kSlopBytes);
-    *op_p = op_end;
-    return true;
-  }
-  inline size_t Produced() const {
-    assert(op_ >= base_);
-    return op_ - base_;
-  }
-  inline void Flush() {}
-};
-
-bool RawUncompress(const char* compressed, size_t compressed_length,
-                   char* uncompressed) {
-  ByteArraySource reader(compressed, compressed_length);
-  return RawUncompress(&reader, uncompressed);
-}
-
-bool RawUncompress(Source* compressed, char* uncompressed) {
-  SnappyArrayWriter output(uncompressed);
-  return InternalUncompress(compressed, &output);
-}
-
-bool Uncompress(const char* compressed, size_t compressed_length,
-                std::string* uncompressed) {
-  size_t ulength;
-  if (!GetUncompressedLength(compressed, compressed_length, &ulength)) {
-    return false;
-  }
-  // On 32-bit builds: max_size() < kuint32max.  Check for that instead
-  // of crashing (e.g., consider externally specified compressed data).
-  if (ulength > uncompressed->max_size()) {
-    return false;
-  }
-  STLStringResizeUninitialized(uncompressed, ulength);
-  return RawUncompress(compressed, compressed_length,
-                       string_as_array(uncompressed));
-}
-
-// A Writer that drops everything on the floor and just does validation
-class SnappyDecompressionValidator {
- private:
-  size_t expected_;
-  size_t produced_;
-
- public:
-  inline SnappyDecompressionValidator() : expected_(0), produced_(0) {}
-  inline void SetExpectedLength(size_t len) { expected_ = len; }
-  size_t GetOutputPtr() { return produced_; }
-  size_t GetBase(ptrdiff_t* op_limit_min_slop) {
-    *op_limit_min_slop = std::numeric_limits<ptrdiff_t>::max() - kSlopBytes + 1;
-    return 1;
-  }
-  void SetOutputPtr(size_t op) { produced_ = op; }
-  inline bool CheckLength() const { return expected_ == produced_; }
-  inline bool Append(const char* ip, size_t len, size_t* produced) {
-    // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-    (void)ip;
-
-    *produced += len;
-    return *produced <= expected_;
-  }
-  inline bool TryFastAppend(const char* ip, size_t available, size_t length,
-                            size_t* produced) {
-    // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-    (void)ip;
-    (void)available;
-    (void)length;
-    (void)produced;
-
-    return false;
-  }
-  inline bool AppendFromSelf(size_t offset, size_t len, size_t* produced) {
-    // See SnappyArrayWriter::AppendFromSelf for an explanation of
-    // the "offset - 1u" trick.
-    if (*produced <= offset - 1u) return false;
-    *produced += len;
-    return *produced <= expected_;
-  }
-  inline void Flush() {}
-};
-
-bool IsValidCompressedBuffer(const char* compressed, size_t compressed_length) {
-  ByteArraySource reader(compressed, compressed_length);
-  SnappyDecompressionValidator writer;
-  return InternalUncompress(&reader, &writer);
-}
-
-bool IsValidCompressed(Source* compressed) {
-  SnappyDecompressionValidator writer;
-  return InternalUncompress(compressed, &writer);
-}
-
-void RawCompress(const char* input, size_t input_length, char* compressed,
-                 size_t* compressed_length) {
-  ByteArraySource reader(input, input_length);
-  UncheckedByteArraySink writer(compressed);
-  Compress(&reader, &writer);
-
-  // Compute how many bytes were added
-  *compressed_length = (writer.CurrentDestination() - compressed);
-}
-
-void RawCompressFromIOVec(const struct iovec* iov, size_t uncompressed_length,
-                          char* compressed, size_t* compressed_length) {
-  SnappyIOVecReader reader(iov, uncompressed_length);
-  UncheckedByteArraySink writer(compressed);
-  Compress(&reader, &writer);
-
-  // Compute how many bytes were added.
-  *compressed_length = writer.CurrentDestination() - compressed;
-}
-
-size_t Compress(const char* input, size_t input_length,
-                std::string* compressed) {
-  // Pre-grow the buffer to the max length of the compressed output
-  STLStringResizeUninitialized(compressed, MaxCompressedLength(input_length));
-
-  size_t compressed_length;
-  RawCompress(input, input_length, string_as_array(compressed),
-              &compressed_length);
-  compressed->erase(compressed_length);
-  return compressed_length;
-}
-
-size_t CompressFromIOVec(const struct iovec* iov, size_t iov_cnt,
-                         std::string* compressed) {
-  // Compute the number of bytes to be compressed.
-  size_t uncompressed_length = 0;
-  for (size_t i = 0; i < iov_cnt; ++i) {
-    uncompressed_length += iov[i].iov_len;
-  }
-
-  // Pre-grow the buffer to the max length of the compressed output.
-  STLStringResizeUninitialized(compressed, MaxCompressedLength(
-      uncompressed_length));
-
-  size_t compressed_length;
-  RawCompressFromIOVec(iov, uncompressed_length, string_as_array(compressed),
-                       &compressed_length);
-  compressed->erase(compressed_length);
-  return compressed_length;
-}
-
-// -----------------------------------------------------------------------
-// Sink interface
-// -----------------------------------------------------------------------
-
-// A type that decompresses into a Sink. The template parameter
-// Allocator must export one method "char* Allocate(int size);", which
-// allocates a buffer of "size" and appends that to the destination.
-template <typename Allocator>
-class SnappyScatteredWriter {
-  Allocator allocator_;
-
-  // We need random access into the data generated so far.  Therefore
-  // we keep track of all of the generated data as an array of blocks.
-  // All of the blocks except the last have length kBlockSize.
-  std::vector<char*> blocks_;
-  size_t expected_;
-
-  // Total size of all fully generated blocks so far
-  size_t full_size_;
-
-  // Pointer into current output block
-  char* op_base_;   // Base of output block
-  char* op_ptr_;    // Pointer to next unfilled byte in block
-  char* op_limit_;  // Pointer just past block
-  // If op < op_limit_min_slop_ then it's safe to unconditionally write
-  // kSlopBytes starting at op.
-  char* op_limit_min_slop_;
-
-  inline size_t Size() const { return full_size_ + (op_ptr_ - op_base_); }
-
-  bool SlowAppend(const char* ip, size_t len);
-  bool SlowAppendFromSelf(size_t offset, size_t len);
-
- public:
-  inline explicit SnappyScatteredWriter(const Allocator& allocator)
-      : allocator_(allocator),
-        full_size_(0),
-        op_base_(NULL),
-        op_ptr_(NULL),
-        op_limit_(NULL),
-        op_limit_min_slop_(NULL) {}
-  char* GetOutputPtr() { return op_ptr_; }
-  char* GetBase(ptrdiff_t* op_limit_min_slop) {
-    *op_limit_min_slop = op_limit_min_slop_ - op_base_;
-    return op_base_;
-  }
-  void SetOutputPtr(char* op) { op_ptr_ = op; }
-
-  inline void SetExpectedLength(size_t len) {
-    assert(blocks_.empty());
-    expected_ = len;
-  }
-
-  inline bool CheckLength() const { return Size() == expected_; }
-
-  // Return the number of bytes actually uncompressed so far
-  inline size_t Produced() const { return Size(); }
-
-  inline bool Append(const char* ip, size_t len, char** op_p) {
-    char* op = *op_p;
-    size_t avail = op_limit_ - op;
-    if (len <= avail) {
-      // Fast path
-      std::memcpy(op, ip, len);
-      *op_p = op + len;
-      return true;
-    } else {
-      op_ptr_ = op;
-      bool res = SlowAppend(ip, len);
-      *op_p = op_ptr_;
-      return res;
-    }
-  }
-
-  inline bool TryFastAppend(const char* ip, size_t available, size_t length,
-                            char** op_p) {
-    char* op = *op_p;
-    const int space_left = op_limit_ - op;
-    if (length <= 16 && available >= 16 + kMaximumTagLength &&
-        space_left >= 16) {
-      // Fast path, used for the majority (about 95%) of invocations.
-      UnalignedCopy128(ip, op);
-      *op_p = op + length;
-      return true;
-    } else {
-      return false;
-    }
-  }
-
-  inline bool AppendFromSelf(size_t offset, size_t len, char** op_p) {
-    char* op = *op_p;
-    assert(op >= op_base_);
-    // Check if we try to append from before the start of the buffer.
-    if (SNAPPY_PREDICT_FALSE((kSlopBytes < 64 && len > kSlopBytes) ||
-                            static_cast<size_t>(op - op_base_) < offset ||
-                            op >= op_limit_min_slop_ || offset < len)) {
-      if (offset == 0) return false;
-      if (SNAPPY_PREDICT_FALSE(static_cast<size_t>(op - op_base_) < offset ||
-                              op + len > op_limit_)) {
-        op_ptr_ = op;
-        bool res = SlowAppendFromSelf(offset, len);
-        *op_p = op_ptr_;
-        return res;
-      }
-      *op_p = IncrementalCopy(op - offset, op, op + len, op_limit_);
-      return true;
-    }
-    // Fast path
-    char* const op_end = op + len;
-    std::memmove(op, op - offset, kSlopBytes);
-    *op_p = op_end;
-    return true;
-  }
-
-  // Called at the end of the decompress. We ask the allocator
-  // write all blocks to the sink.
-  inline void Flush() { allocator_.Flush(Produced()); }
-};
-
-template <typename Allocator>
-bool SnappyScatteredWriter<Allocator>::SlowAppend(const char* ip, size_t len) {
-  size_t avail = op_limit_ - op_ptr_;
-  while (len > avail) {
-    // Completely fill this block
-    std::memcpy(op_ptr_, ip, avail);
-    op_ptr_ += avail;
-    assert(op_limit_ - op_ptr_ == 0);
-    full_size_ += (op_ptr_ - op_base_);
-    len -= avail;
-    ip += avail;
-
-    // Bounds check
-    if (full_size_ + len > expected_) return false;
-
-    // Make new block
-    size_t bsize = std::min<size_t>(kBlockSize, expected_ - full_size_);
-    op_base_ = allocator_.Allocate(bsize);
-    op_ptr_ = op_base_;
-    op_limit_ = op_base_ + bsize;
-    op_limit_min_slop_ = op_limit_ - std::min<size_t>(kSlopBytes - 1, bsize);
-
-    blocks_.push_back(op_base_);
-    avail = bsize;
-  }
-
-  std::memcpy(op_ptr_, ip, len);
-  op_ptr_ += len;
-  return true;
-}
-
-template <typename Allocator>
-bool SnappyScatteredWriter<Allocator>::SlowAppendFromSelf(size_t offset,
-                                                         size_t len) {
-  // Overflow check
-  // See SnappyArrayWriter::AppendFromSelf for an explanation of
-  // the "offset - 1u" trick.
-  const size_t cur = Size();
-  if (offset - 1u >= cur) return false;
-  if (expected_ - cur < len) return false;
-
-  // Currently we shouldn't ever hit this path because Compress() chops the
-  // input into blocks and does not create cross-block copies. However, it is
-  // nice if we do not rely on that, since we can get better compression if we
-  // allow cross-block copies and thus might want to change the compressor in
-  // the future.
-  // TODO Replace this with a properly optimized path. This is not
-  // triggered right now. But this is so super slow, that it would regress
-  // performance unacceptably if triggered.
-  size_t src = cur - offset;
-  char* op = op_ptr_;
-  while (len-- > 0) {
-    char c = blocks_[src >> kBlockLog][src & (kBlockSize - 1)];
-    if (!Append(&c, 1, &op)) {
-      op_ptr_ = op;
-      return false;
-    }
-    src++;
-  }
-  op_ptr_ = op;
-  return true;
-}
-
-class SnappySinkAllocator {
- public:
-  explicit SnappySinkAllocator(Sink* dest) : dest_(dest) {}
-  ~SnappySinkAllocator() {}
-
-  char* Allocate(int size) {
-    Datablock block(new char[size], size);
-    blocks_.push_back(block);
-    return block.data;
-  }
-
-  // We flush only at the end, because the writer wants
-  // random access to the blocks and once we hand the
-  // block over to the sink, we can't access it anymore.
-  // Also we don't write more than has been actually written
-  // to the blocks.
-  void Flush(size_t size) {
-    size_t size_written = 0;
-    for (Datablock& block : blocks_) {
-      size_t block_size = std::min<size_t>(block.size, size - size_written);
-      dest_->AppendAndTakeOwnership(block.data, block_size,
-                                    &SnappySinkAllocator::Deleter, NULL);
-      size_written += block_size;
-    }
-    blocks_.clear();
-  }
-
- private:
-  struct Datablock {
-    char* data;
-    size_t size;
-    Datablock(char* p, size_t s) : data(p), size(s) {}
-  };
-
-  static void Deleter(void* arg, const char* bytes, size_t size) {
-    // TODO: Switch to [[maybe_unused]] when we can assume C++17.
-    (void)arg;
-    (void)size;
-
-    delete[] bytes;
-  }
-
-  Sink* dest_;
-  std::vector<Datablock> blocks_;
-
-  // Note: copying this object is allowed
-};
-
-size_t UncompressAsMuchAsPossible(Source* compressed, Sink* uncompressed) {
-  SnappySinkAllocator allocator(uncompressed);
-  SnappyScatteredWriter<SnappySinkAllocator> writer(allocator);
-  InternalUncompress(compressed, &writer);
-  return writer.Produced();
-}
-
-bool Uncompress(Source* compressed, Sink* uncompressed) {
-  // Read the uncompressed length from the front of the compressed input
-  SnappyDecompressor decompressor(compressed);
-  uint32_t uncompressed_len = 0;
-  if (!decompressor.ReadUncompressedLength(&uncompressed_len)) {
-    return false;
-  }
-
-  char c;
-  size_t allocated_size;
-  char* buf = uncompressed->GetAppendBufferVariable(1, uncompressed_len, &c, 1,
-                                                    &allocated_size);
-
-  const size_t compressed_len = compressed->Available();
-  // If we can get a flat buffer, then use it, otherwise do block by block
-  // uncompression
-  if (allocated_size >= uncompressed_len) {
-    SnappyArrayWriter writer(buf);
-    bool result = InternalUncompressAllTags(&decompressor, &writer,
-                                            compressed_len, uncompressed_len);
-    uncompressed->Append(buf, writer.Produced());
-    return result;
-  } else {
-    SnappySinkAllocator allocator(uncompressed);
-    SnappyScatteredWriter<SnappySinkAllocator> writer(allocator);
-    return InternalUncompressAllTags(&decompressor, &writer, compressed_len,
-                                     uncompressed_len);
-  }
-}
-
-}  // namespace snappy