couchbase 4.3.0 → 4.3.1

package/deps/couchbase-cxx-cache/asio/41f31469d0dd420500b334dc8c2fd3ffe7320d8e/asio/asio/include/asio/read.hpp

@@ -0,0 +1,1448 @@
+//
+// read.hpp
+// ~~~~~~~~
+//
+// Copyright (c) 2003-2023 Christopher M. Kohlhoff (chris at kohlhoff dot com)
+//
+// Distributed under the Boost Software License, Version 1.0. (See accompanying
+// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+#ifndef ASIO_READ_HPP
+#define ASIO_READ_HPP
+
+#if defined(_MSC_VER) && (_MSC_VER >= 1200)
+# pragma once
+#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
+
+#include "asio/detail/config.hpp"
+#include <cstddef>
+#include "asio/async_result.hpp"
+#include "asio/buffer.hpp"
+#include "asio/completion_condition.hpp"
+#include "asio/error.hpp"
+
+#if !defined(ASIO_NO_EXTENSIONS)
+# include "asio/basic_streambuf_fwd.hpp"
+#endif // !defined(ASIO_NO_EXTENSIONS)
+
+#include "asio/detail/push_options.hpp"
+
+namespace asio {
+namespace detail {
+
+template <typename> class initiate_async_read;
+#if !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+template <typename> class initiate_async_read_dynbuf_v1;
+#endif // !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+template <typename> class initiate_async_read_dynbuf_v2;
+
+} // namespace detail
+
+/**
+ * @defgroup read asio::read
+ *
+ * @brief The @c read function is a composed operation that reads a certain
+ * amount of data from a stream before returning.
+ */
+/*@{*/
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read(s, asio::buffer(data, size)); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncReadStream, typename MutableBufferSequence>
+std::size_t read(SyncReadStream& s, const MutableBufferSequence& buffers,
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read(s, asio::buffer(data, size), ec); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncReadStream, typename MutableBufferSequence>
+std::size_t read(SyncReadStream& s, const MutableBufferSequence& buffers,
+    asio::error_code& ec,
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::read(s, asio::buffer(data, size),
+ *     asio::transfer_at_least(32)); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ */
+template <typename SyncReadStream, typename MutableBufferSequence,
+  typename CompletionCondition>
+std::size_t read(SyncReadStream& s, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition,
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncReadStream, typename MutableBufferSequence,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition, asio::error_code& ec,
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0);
+
+#if !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v1>
+std::size_t read(SyncReadStream& s,
+    DynamicBuffer_v1&& buffers,
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v1>
+std::size_t read(SyncReadStream& s,
+    DynamicBuffer_v1&& buffers,
+    asio::error_code& ec,
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v1,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s,
+    DynamicBuffer_v1&& buffers,
+    CompletionCondition completion_condition,
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v1,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s,
+    DynamicBuffer_v1&& buffers,
+    CompletionCondition completion_condition, asio::error_code& ec,
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0);
+
+#if !defined(ASIO_NO_EXTENSIONS)
+#if !defined(ASIO_NO_IOSTREAM)
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, b,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncReadStream, typename Allocator>
+std::size_t read(SyncReadStream& s, basic_streambuf<Allocator>& b);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, b,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncReadStream, typename Allocator>
+std::size_t read(SyncReadStream& s, basic_streambuf<Allocator>& b,
+    asio::error_code& ec);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ */
+template <typename SyncReadStream, typename Allocator,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param b The basic_streambuf object into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncReadStream, typename Allocator,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition, asio::error_code& ec);
+
+#endif // !defined(ASIO_NO_IOSTREAM)
+#endif // !defined(ASIO_NO_EXTENSIONS)
+#endif // !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all()); @endcode
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v2>
+std::size_t read(SyncReadStream& s, DynamicBuffer_v2 buffers,
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::read(
+ *     s, buffers,
+ *     asio::transfer_all(), ec); @endcode
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v2>
+std::size_t read(SyncReadStream& s, DynamicBuffer_v2 buffers,
+    asio::error_code& ec,
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @returns The number of bytes transferred.
+ *
+ * @throws asio::system_error Thrown on failure.
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v2,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s, DynamicBuffer_v2 buffers,
+    CompletionCondition completion_condition,
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0);
+
+/// Attempt to read a certain amount of data from a stream before returning.
+/**
+ * This function is used to read a certain number of bytes of data from a
+ * stream. The call will block until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * read_some function.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the SyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's read_some function.
+ *
+ * @param ec Set to indicate what error occurred, if any.
+ *
+ * @returns The number of bytes read. If an error occurs, returns the total
+ * number of bytes successfully transferred prior to the error.
+ */
+template <typename SyncReadStream, typename DynamicBuffer_v2,
+    typename CompletionCondition>
+std::size_t read(SyncReadStream& s, DynamicBuffer_v2 buffers,
+    CompletionCondition completion_condition, asio::error_code& ec,
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0);
+
+/*@}*/
+/**
+ * @defgroup async_read asio::async_read
+ *
+ * @brief The @c async_read function is a composed asynchronous operation that
+ * reads a certain amount of data from a stream before completion.
+ */
+/*@{*/
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream. Although the buffers object may be copied as necessary, ownership of
+ * the underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code
+ * asio::async_read(s, asio::buffer(data, size), handler);
+ * @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read(
+ *     s, buffers,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream, typename MutableBufferSequence,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, const MutableBufferSequence& buffers,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read<AsyncReadStream>>(),
+        token, buffers, transfer_all()));
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The supplied buffers are full. That is, the bytes transferred is equal to
+ * the sum of the buffer sizes.
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers One or more buffers into which the data will be read. The sum
+ * of the buffer sizes indicates the maximum number of bytes to read from the
+ * stream. Although the buffers object may be copied as necessary, ownership of
+ * the underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's async_read_some function.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @par Example
+ * To read into a single data buffer use the @ref buffer function as follows:
+ * @code asio::async_read(s,
+ *     asio::buffer(data, size),
+ *     asio::transfer_at_least(32),
+ *     handler); @endcode
+ * See the @ref buffer documentation for information on reading into multiple
+ * buffers in one go, and how to use it with arrays, boost::array or
+ * std::vector.
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream,
+    typename MutableBufferSequence, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, const MutableBufferSequence& buffers,
+    CompletionCondition completion_condition,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_mutable_buffer_sequence<MutableBufferSequence>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read<AsyncReadStream>>(),
+        token, buffers,
+        static_cast<CompletionCondition&&>(completion_condition)));
+
+#if !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ * Although the buffers object may be copied as necessary, ownership of the
+ * underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read(
+ *     s, buffers,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream, typename DynamicBuffer_v1,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, DynamicBuffer_v1&& buffers,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v1<AsyncReadStream>>(),
+        token, static_cast<DynamicBuffer_v1&&>(buffers), transfer_all()));
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ * Although the buffers object may be copied as necessary, ownership of the
+ * underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's async_read_some function.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream,
+    typename DynamicBuffer_v1, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, DynamicBuffer_v1&& buffers,
+    CompletionCondition completion_condition,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_dynamic_buffer_v1<decay_t<DynamicBuffer_v1>>::value
+    > = 0,
+    constraint_t<
+      !is_dynamic_buffer_v2<decay_t<DynamicBuffer_v1>>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v1<AsyncReadStream>>(),
+        token, static_cast<DynamicBuffer_v1&&>(buffers),
+        static_cast<CompletionCondition&&>(completion_condition)));
+
+#if !defined(ASIO_NO_EXTENSIONS)
+#if !defined(ASIO_NO_IOSTREAM)
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param b A basic_streambuf object into which the data will be read. Ownership
+ * of the streambuf is retained by the caller, which must guarantee that it
+ * remains valid until the completion handler is called.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read(
+ *     s, b,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream, typename Allocator,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, basic_streambuf<Allocator>& b,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>())
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v1<AsyncReadStream>>(),
+        token, basic_streambuf_ref<Allocator>(b), transfer_all()));
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The supplied buffer is full (that is, it has reached maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param b A basic_streambuf object into which the data will be read. Ownership
+ * of the streambuf is retained by the caller, which must guarantee that it
+ * remains valid until the completion handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's async_read_some function.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream,
+    typename Allocator, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, basic_streambuf<Allocator>& b,
+    CompletionCondition completion_condition,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>())
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v1<AsyncReadStream>>(),
+        token, basic_streambuf_ref<Allocator>(b),
+        static_cast<CompletionCondition&&>(completion_condition)));
+
+#endif // !defined(ASIO_NO_IOSTREAM)
+#endif // !defined(ASIO_NO_EXTENSIONS)
+#endif // !defined(ASIO_NO_DYNAMIC_BUFFER_V1)
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li An error occurred.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ * Although the buffers object may be copied as necessary, ownership of the
+ * underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @note This overload is equivalent to calling:
+ * @code asio::async_read(
+ *     s, buffers,
+ *     asio::transfer_all(),
+ *     handler); @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream, typename DynamicBuffer_v2,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, DynamicBuffer_v2 buffers,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v2<AsyncReadStream>>(),
+        token, static_cast<DynamicBuffer_v2&&>(buffers), transfer_all()));
+
+/// Start an asynchronous operation to read a certain amount of data from a
+/// stream.
+/**
+ * This function is used to asynchronously read a certain number of bytes of
+ * data from a stream. It is an initiating function for an @ref
+ * asynchronous_operation, and always returns immediately. The asynchronous
+ * operation will continue until one of the following conditions is true:
+ *
+ * @li The specified dynamic buffer sequence is full (that is, it has reached
+ * maximum size).
+ *
+ * @li The completion_condition function object returns 0.
+ *
+ * This operation is implemented in terms of zero or more calls to the stream's
+ * async_read_some function, and is known as a <em>composed operation</em>. The
+ * program must ensure that the stream performs no other read operations (such
+ * as async_read, the stream's async_read_some function, or any other composed
+ * operations that perform reads) until this operation completes.
+ *
+ * @param s The stream from which the data is to be read. The type must support
+ * the AsyncReadStream concept.
+ *
+ * @param buffers The dynamic buffer sequence into which the data will be read.
+ * Although the buffers object may be copied as necessary, ownership of the
+ * underlying memory blocks is retained by the caller, which must guarantee
+ * that they remain valid until the completion handler is called.
+ *
+ * @param completion_condition The function object to be called to determine
+ * whether the read operation is complete. The signature of the function object
+ * must be:
+ * @code std::size_t completion_condition(
+ *   // Result of latest async_read_some operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes transferred so far.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * A return value of 0 indicates that the read operation is complete. A non-zero
+ * return value indicates the maximum number of bytes to be read on the next
+ * call to the stream's async_read_some function.
+ *
+ * @param token The @ref completion_token that will be used to produce a
+ * completion handler, which will be called when the read completes.
+ * Potential completion tokens include @ref use_future, @ref use_awaitable,
+ * @ref yield_context, or a function object with the correct completion
+ * signature. The function signature of the completion handler must be:
+ * @code void handler(
+ *   // Result of operation.
+ *   const asio::error_code& error,
+ *
+ *   // Number of bytes copied into the buffers. If an error
+ *   // occurred, this will be the number of bytes successfully
+ *   // transferred prior to the error.
+ *   std::size_t bytes_transferred
+ * ); @endcode
+ * Regardless of whether the asynchronous operation completes immediately or
+ * not, the completion handler will not be invoked from within this function.
+ * On immediate completion, invocation of the handler will be performed in a
+ * manner equivalent to using asio::post().
+ *
+ * @par Completion Signature
+ * @code void(asio::error_code, std::size_t) @endcode
+ *
+ * @par Per-Operation Cancellation
+ * This asynchronous operation supports cancellation for the following
+ * asio::cancellation_type values:
+ *
+ * @li @c cancellation_type::terminal
+ *
+ * @li @c cancellation_type::partial
+ *
+ * if they are also supported by the @c AsyncReadStream type's
+ * @c async_read_some operation.
+ */
+template <typename AsyncReadStream,
+    typename DynamicBuffer_v2, typename CompletionCondition,
+    ASIO_COMPLETION_TOKEN_FOR(void (asio::error_code,
+      std::size_t)) ReadToken = default_completion_token_t<
+        typename AsyncReadStream::executor_type>>
+auto async_read(AsyncReadStream& s, DynamicBuffer_v2 buffers,
+    CompletionCondition completion_condition,
+    ReadToken&& token = default_completion_token_t<
+      typename AsyncReadStream::executor_type>(),
+    constraint_t<
+      is_dynamic_buffer_v2<DynamicBuffer_v2>::value
+    > = 0)
+  -> decltype(
+    async_initiate<ReadToken,
+      void (asio::error_code, std::size_t)>(
+        declval<detail::initiate_async_read_dynbuf_v2<AsyncReadStream>>(),
+        token, static_cast<DynamicBuffer_v2&&>(buffers),
+        static_cast<CompletionCondition&&>(completion_condition)));
+
+/*@}*/
+
+} // namespace asio
+
+#include "asio/detail/pop_options.hpp"
+
+#include "asio/impl/read.hpp"
+
+#endif // ASIO_READ_HPP