copperflow 0.3.4 → 0.4.1
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- package/README.md +117 -14
- package/dist/app/THIRD_PARTY_LICENSES.txt +5 -0
- package/dist/app/assets/NewPartDialog-ZQ4Y3m45.js +1 -0
- package/dist/app/assets/PackagesDialog-C8ZyWl-g.css +1 -0
- package/dist/app/assets/PackagesDialog-vEzilmpR.js +2 -0
- package/dist/app/assets/VerifyPartDialog-BHLqD_WJ.css +1 -0
- package/dist/app/assets/VerifyPartDialog-DYr1UIds.js +2 -0
- package/dist/app/assets/footprint-preview-Nyk2poiN.js +160 -0
- package/dist/app/assets/index-BUjGdMvr.js +20 -0
- package/dist/app/assets/index-CF7-tL4t.css +1 -0
- package/dist/app/assets/texture-worker-CyI_g_XZ.js +1 -0
- package/dist/app/index.html +2 -2
- package/dist/cli-commands.js +141 -16
- package/dist/cli-commands.js.map +1 -1
- package/dist/cli-impedance.d.ts +4 -0
- package/dist/cli-impedance.js +56 -0
- package/dist/cli-impedance.js.map +1 -0
- package/dist/cli-simulate.d.ts +3 -0
- package/dist/cli-simulate.js +54 -0
- package/dist/cli-simulate.js.map +1 -0
- package/dist/core/analyze.js +5 -2
- package/dist/core/analyze.js.map +1 -1
- package/dist/core/bom.d.ts +6 -1
- package/dist/core/bom.js +23 -4
- package/dist/core/bom.js.map +1 -1
- package/dist/core/case-results.d.ts +4 -0
- package/dist/core/case-results.js +9 -0
- package/dist/core/case-results.js.map +1 -0
- package/dist/core/change-files.d.ts +31 -0
- package/dist/core/change-files.js +67 -0
- package/dist/core/change-files.js.map +1 -0
- package/dist/core/change-render.d.ts +18 -0
- package/dist/core/change-render.js +48 -0
- package/dist/core/change-render.js.map +1 -0
- package/dist/core/change-view.d.ts +33 -0
- package/dist/core/change-view.js +73 -0
- package/dist/core/change-view.js.map +1 -0
- package/dist/core/change-words.d.ts +39 -0
- package/dist/core/change-words.js +214 -0
- package/dist/core/change-words.js.map +1 -0
- package/dist/core/checklist-text.d.ts +21 -0
- package/dist/core/checklist-text.js +59 -0
- package/dist/core/checklist-text.js.map +1 -0
- package/dist/core/edit.js +5 -2
- package/dist/core/edit.js.map +1 -1
- package/dist/core/fabrication.d.ts +9 -2
- package/dist/core/fabrication.js +29 -10
- package/dist/core/fabrication.js.map +1 -1
- package/dist/core/library.d.ts +46 -0
- package/dist/core/library.js +54 -16
- package/dist/core/library.js.map +1 -1
- package/dist/core/model-export.d.ts +33 -0
- package/dist/core/model-export.js +33 -0
- package/dist/core/model-export.js.map +1 -0
- package/dist/core/modules.d.ts +1 -0
- package/dist/core/modules.js +17 -0
- package/dist/core/modules.js.map +1 -1
- package/dist/core/order-report.d.ts +10 -0
- package/dist/core/order-report.js +93 -0
- package/dist/core/order-report.js.map +1 -0
- package/dist/core/packages.d.ts +18 -0
- package/dist/core/packages.js +49 -0
- package/dist/core/packages.js.map +1 -0
- package/dist/core/pin-header.d.ts +5 -0
- package/dist/core/pin-header.js +77 -0
- package/dist/core/pin-header.js.map +1 -0
- package/dist/core/pin-map.d.ts +46 -0
- package/dist/core/pin-map.js +101 -0
- package/dist/core/pin-map.js.map +1 -0
- package/dist/core/render.d.ts +26 -5
- package/dist/core/render.js +16 -6
- package/dist/core/render.js.map +1 -1
- package/dist/core/sheet-card.d.ts +4 -0
- package/dist/core/sheet-card.js +46 -1
- package/dist/core/sheet-card.js.map +1 -1
- package/dist/core/sheet-files.js +10 -3
- package/dist/core/sheet-files.js.map +1 -1
- package/dist/core/simulate.d.ts +19 -0
- package/dist/core/simulate.js +72 -0
- package/dist/core/simulate.js.map +1 -0
- package/dist/core/step-export.d.ts +17 -0
- package/dist/core/step-export.js +35 -0
- package/dist/core/step-export.js.map +1 -0
- package/dist/core/supplier-prop.d.ts +6 -0
- package/dist/core/supplier-prop.js +21 -0
- package/dist/core/supplier-prop.js.map +1 -0
- package/dist/core/workspace.d.ts +2 -1
- package/dist/core/workspace.js +2 -1
- package/dist/core/workspace.js.map +1 -1
- package/dist/engine/board.js +3 -1
- package/dist/engine/board.js.map +1 -1
- package/dist/engine/checks/fast-lines.d.ts +60 -0
- package/dist/engine/checks/fast-lines.js +209 -0
- package/dist/engine/checks/fast-lines.js.map +1 -0
- package/dist/engine/checks/index.js +2 -0
- package/dist/engine/checks/index.js.map +1 -1
- package/dist/engine/design-diff.d.ts +120 -0
- package/dist/engine/design-diff.js +249 -0
- package/dist/engine/design-diff.js.map +1 -0
- package/dist/engine/design.d.ts +3 -0
- package/dist/engine/design.js +7 -2
- package/dist/engine/design.js.map +1 -1
- package/dist/engine/fab/export.d.ts +17 -1
- package/dist/engine/fab/export.js +26 -4
- package/dist/engine/fab/export.js.map +1 -1
- package/dist/engine/fab/names.d.ts +2 -2
- package/dist/engine/fab/names.js +4 -2
- package/dist/engine/fab/names.js.map +1 -1
- package/dist/engine/fab/picture/board-picture.d.ts +52 -0
- package/dist/engine/fab/picture/board-picture.js +102 -0
- package/dist/engine/fab/picture/board-picture.js.map +1 -0
- package/dist/engine/fab/picture/board-view.d.ts +20 -0
- package/dist/engine/fab/picture/board-view.js +50 -0
- package/dist/engine/fab/picture/board-view.js.map +1 -0
- package/dist/engine/fab/picture/compose.d.ts +50 -0
- package/dist/engine/fab/picture/compose.js +208 -0
- package/dist/engine/fab/picture/compose.js.map +1 -0
- package/dist/engine/fab/picture/layer-images.d.ts +9 -0
- package/dist/engine/fab/picture/layer-images.js +67 -0
- package/dist/engine/fab/picture/layer-images.js.map +1 -0
- package/dist/engine/fab/picture/looks.d.ts +152 -0
- package/dist/engine/fab/picture/looks.js +53 -0
- package/dist/engine/fab/picture/looks.js.map +1 -0
- package/dist/engine/fab/picture/png.d.ts +31 -0
- package/dist/engine/fab/picture/png.js +47 -0
- package/dist/engine/fab/picture/png.js.map +1 -0
- package/dist/engine/fab/picture/raster.d.ts +46 -0
- package/dist/engine/fab/picture/raster.js +170 -0
- package/dist/engine/fab/picture/raster.js.map +1 -0
- package/dist/engine/fab/zip.d.ts +2 -1
- package/dist/engine/fab/zip.js +1 -1
- package/dist/engine/fab/zip.js.map +1 -1
- package/dist/engine/footprints/array.d.ts +4 -0
- package/dist/engine/footprints/array.js +51 -0
- package/dist/engine/footprints/array.js.map +1 -0
- package/dist/engine/footprints/axial.d.ts +6 -0
- package/dist/engine/footprints/axial.js +115 -0
- package/dist/engine/footprints/axial.js.map +1 -0
- package/dist/engine/footprints/catalogue.d.ts +39 -0
- package/dist/engine/footprints/catalogue.js +284 -0
- package/dist/engine/footprints/catalogue.js.map +1 -0
- package/dist/engine/footprints/chip.js +10 -1
- package/dist/engine/footprints/chip.js.map +1 -1
- package/dist/engine/footprints/connector.d.ts +16 -0
- package/dist/engine/footprints/connector.js +31 -0
- package/dist/engine/footprints/connector.js.map +1 -0
- package/dist/engine/footprints/dcjack.d.ts +3 -0
- package/dist/engine/footprints/dcjack.js +46 -0
- package/dist/engine/footprints/dcjack.js.map +1 -0
- package/dist/engine/footprints/dpak.d.ts +7 -0
- package/dist/engine/footprints/dpak.js +172 -0
- package/dist/engine/footprints/dpak.js.map +1 -0
- package/dist/engine/footprints/dual.d.ts +11 -2
- package/dist/engine/footprints/dual.js +113 -12
- package/dist/engine/footprints/dual.js.map +1 -1
- package/dist/engine/footprints/index.js +46 -3
- package/dist/engine/footprints/index.js.map +1 -1
- package/dist/engine/footprints/inductor.d.ts +3 -0
- package/dist/engine/footprints/inductor.js +32 -0
- package/dist/engine/footprints/inductor.js.map +1 -0
- package/dist/engine/footprints/known.js +114 -14
- package/dist/engine/footprints/known.js.map +1 -1
- package/dist/engine/footprints/ledsmd.d.ts +3 -0
- package/dist/engine/footprints/ledsmd.js +52 -0
- package/dist/engine/footprints/ledsmd.js.map +1 -0
- package/dist/engine/footprints/ledth.d.ts +4 -0
- package/dist/engine/footprints/ledth.js +45 -0
- package/dist/engine/footprints/ledth.js.map +1 -0
- package/dist/engine/footprints/melf.d.ts +8 -0
- package/dist/engine/footprints/melf.js +56 -0
- package/dist/engine/footprints/melf.js.map +1 -0
- package/dist/engine/footprints/plcc.d.ts +4 -0
- package/dist/engine/footprints/plcc.js +117 -0
- package/dist/engine/footprints/plcc.js.map +1 -0
- package/dist/engine/footprints/resonator.d.ts +3 -0
- package/dist/engine/footprints/resonator.js +33 -0
- package/dist/engine/footprints/resonator.js.map +1 -0
- package/dist/engine/footprints/screw.d.ts +3 -0
- package/dist/engine/footprints/screw.js +51 -0
- package/dist/engine/footprints/screw.js.map +1 -0
- package/dist/engine/footprints/smallsot.d.ts +8 -0
- package/dist/engine/footprints/smallsot.js +143 -0
- package/dist/engine/footprints/smallsot.js.map +1 -0
- package/dist/engine/footprints/smdbox.d.ts +33 -0
- package/dist/engine/footprints/smdbox.js +76 -0
- package/dist/engine/footprints/smdbox.js.map +1 -0
- package/dist/engine/footprints/smdcan.d.ts +3 -0
- package/dist/engine/footprints/smdcan.js +61 -0
- package/dist/engine/footprints/smdcan.js.map +1 -0
- package/dist/engine/footprints/smdip.d.ts +4 -0
- package/dist/engine/footprints/smdip.js +58 -0
- package/dist/engine/footprints/smdip.js.map +1 -0
- package/dist/engine/footprints/socket.d.ts +8 -0
- package/dist/engine/footprints/socket.js +21 -0
- package/dist/engine/footprints/socket.js.map +1 -0
- package/dist/engine/footprints/sod.d.ts +6 -0
- package/dist/engine/footprints/sod.js +63 -6
- package/dist/engine/footprints/sod.js.map +1 -1
- package/dist/engine/footprints/sot.d.ts +1 -1
- package/dist/engine/footprints/sot.js +17 -2
- package/dist/engine/footprints/sot.js.map +1 -1
- package/dist/engine/footprints/tact.d.ts +3 -0
- package/dist/engine/footprints/tact.js +65 -0
- package/dist/engine/footprints/tact.js.map +1 -0
- package/dist/engine/footprints/tantalum.d.ts +7 -0
- package/dist/engine/footprints/tantalum.js +91 -0
- package/dist/engine/footprints/tantalum.js.map +1 -0
- package/dist/engine/footprints/to92inline.d.ts +14 -0
- package/dist/engine/footprints/to92inline.js +21 -0
- package/dist/engine/footprints/to92inline.js.map +1 -0
- package/dist/engine/footprints/topower.d.ts +7 -0
- package/dist/engine/footprints/topower.js +119 -0
- package/dist/engine/footprints/topower.js.map +1 -0
- package/dist/engine/footprints/usb.d.ts +32 -0
- package/dist/engine/footprints/usb.js +109 -0
- package/dist/engine/footprints/usb.js.map +1 -0
- package/dist/engine/footprints/xtal.d.ts +4 -0
- package/dist/engine/footprints/xtal.js +61 -0
- package/dist/engine/footprints/xtal.js.map +1 -0
- package/dist/engine/impedance.d.ts +72 -0
- package/dist/engine/impedance.js +133 -0
- package/dist/engine/impedance.js.map +1 -0
- package/dist/engine/line-length.d.ts +15 -0
- package/dist/engine/line-length.js +116 -0
- package/dist/engine/line-length.js.map +1 -0
- package/dist/engine/model.d.ts +2 -0
- package/dist/engine/model.js.map +1 -1
- package/dist/engine/pcb-place/roles.d.ts +3 -1
- package/dist/engine/pcb-place/roles.js +5 -0
- package/dist/engine/pcb-place/roles.js.map +1 -1
- package/dist/engine/rules/impedance-widths.d.ts +20 -0
- package/dist/engine/rules/impedance-widths.js +57 -0
- package/dist/engine/rules/impedance-widths.js.map +1 -0
- package/dist/engine/rules/load.js +11 -2
- package/dist/engine/rules/load.js.map +1 -1
- package/dist/engine/rules/pairs.d.ts +27 -0
- package/dist/engine/rules/pairs.js +86 -0
- package/dist/engine/rules/pairs.js.map +1 -0
- package/dist/engine/rules/profiles.js +16 -0
- package/dist/engine/rules/profiles.js.map +1 -1
- package/dist/engine/rules/rotations.d.ts +12 -3
- package/dist/engine/rules/rotations.js +77 -2
- package/dist/engine/rules/rotations.js.map +1 -1
- package/dist/engine/rules/schema.d.ts +44 -0
- package/dist/engine/rules/schema.js +16 -1
- package/dist/engine/rules/schema.js.map +1 -1
- package/dist/engine/sim/answer.d.ts +13 -0
- package/dist/engine/sim/answer.js +101 -0
- package/dist/engine/sim/answer.js.map +1 -0
- package/dist/engine/sim/cases.d.ts +29 -0
- package/dist/engine/sim/cases.js +63 -0
- package/dist/engine/sim/cases.js.map +1 -0
- package/dist/engine/sim/devices.d.ts +109 -0
- package/dist/engine/sim/devices.js +137 -0
- package/dist/engine/sim/devices.js.map +1 -0
- package/dist/engine/sim/elements.d.ts +49 -0
- package/dist/engine/sim/elements.js +2 -0
- package/dist/engine/sim/elements.js.map +1 -0
- package/dist/engine/sim/from-circuit.d.ts +52 -0
- package/dist/engine/sim/from-circuit.js +354 -0
- package/dist/engine/sim/from-circuit.js.map +1 -0
- package/dist/engine/sim/limits.d.ts +12 -0
- package/dist/engine/sim/limits.js +79 -0
- package/dist/engine/sim/limits.js.map +1 -0
- package/dist/engine/sim/linear.d.ts +2 -0
- package/dist/engine/sim/linear.js +49 -0
- package/dist/engine/sim/linear.js.map +1 -0
- package/dist/engine/sim/model-schema.d.ts +246 -0
- package/dist/engine/sim/model-schema.js +115 -0
- package/dist/engine/sim/model-schema.js.map +1 -0
- package/dist/engine/sim/part-models.d.ts +47 -0
- package/dist/engine/sim/part-models.js +102 -0
- package/dist/engine/sim/part-models.js.map +1 -0
- package/dist/engine/sim/run.d.ts +14 -0
- package/dist/engine/sim/run.js +13 -0
- package/dist/engine/sim/run.js.map +1 -0
- package/dist/engine/sim/solve.d.ts +42 -0
- package/dist/engine/sim/solve.js +294 -0
- package/dist/engine/sim/solve.js.map +1 -0
- package/dist/engine/sim/spice.d.ts +5 -0
- package/dist/engine/sim/spice.js +66 -0
- package/dist/engine/sim/spice.js.map +1 -0
- package/dist/engine/sim/values.d.ts +4 -0
- package/dist/engine/sim/values.js +40 -0
- package/dist/engine/sim/values.js.map +1 -0
- package/dist/engine/solid/heights-smd.d.ts +3 -0
- package/dist/engine/solid/heights-smd.js +81 -0
- package/dist/engine/solid/heights-smd.js.map +1 -0
- package/dist/engine/solid/heights-through.d.ts +7 -0
- package/dist/engine/solid/heights-through.js +93 -0
- package/dist/engine/solid/heights-through.js.map +1 -0
- package/dist/engine/solid/heights-uno.d.ts +2 -0
- package/dist/engine/solid/heights-uno.js +15 -0
- package/dist/engine/solid/heights-uno.js.map +1 -0
- package/dist/engine/solid/heights.d.ts +31 -0
- package/dist/engine/solid/heights.js +112 -0
- package/dist/engine/solid/heights.js.map +1 -0
- package/dist/engine/solid/limits.d.ts +7 -0
- package/dist/engine/solid/limits.js +20 -0
- package/dist/engine/solid/limits.js.map +1 -0
- package/dist/engine/solid/model.d.ts +54 -0
- package/dist/engine/solid/model.js +147 -0
- package/dist/engine/solid/model.js.map +1 -0
- package/dist/engine/solid/step.d.ts +5 -0
- package/dist/engine/solid/step.js +164 -0
- package/dist/engine/solid/step.js.map +1 -0
- package/dist/engine/solid/thickness.d.ts +11 -0
- package/dist/engine/solid/thickness.js +10 -0
- package/dist/engine/solid/thickness.js.map +1 -0
- package/dist/library/kicad/board.d.ts +26 -0
- package/dist/library/kicad/board.js +96 -0
- package/dist/library/kicad/board.js.map +1 -0
- package/dist/library/kicad/copper.d.ts +44 -0
- package/dist/library/kicad/copper.js +106 -0
- package/dist/library/kicad/copper.js.map +1 -0
- package/dist/library/kicad/footprints.d.ts +62 -0
- package/dist/library/kicad/footprints.js +184 -0
- package/dist/library/kicad/footprints.js.map +1 -0
- package/dist/library/kicad/geometry.d.ts +36 -0
- package/dist/library/kicad/geometry.js +84 -0
- package/dist/library/kicad/geometry.js.map +1 -0
- package/dist/library/kicad/import.d.ts +58 -0
- package/dist/library/kicad/import.js +240 -0
- package/dist/library/kicad/import.js.map +1 -0
- package/dist/library/kicad/plan.d.ts +40 -0
- package/dist/library/kicad/plan.js +139 -0
- package/dist/library/kicad/plan.js.map +1 -0
- package/dist/library/kicad/read.d.ts +30 -0
- package/dist/library/kicad/read.js +105 -0
- package/dist/library/kicad/read.js.map +1 -0
- package/dist/library/kicad/sexpr.d.ts +36 -0
- package/dist/library/kicad/sexpr.js +153 -0
- package/dist/library/kicad/sexpr.js.map +1 -0
- package/dist/library/kicad/tally.d.ts +32 -0
- package/dist/library/kicad/tally.js +55 -0
- package/dist/library/kicad/tally.js.map +1 -0
- package/dist/library/kicad/write.d.ts +37 -0
- package/dist/library/kicad/write.js +146 -0
- package/dist/library/kicad/write.js.map +1 -0
- package/dist/library/new-part.d.ts +2 -0
- package/dist/library/new-part.js +1 -0
- package/dist/library/new-part.js.map +1 -1
- package/dist/mcp/board-import-tool.d.ts +1 -1
- package/dist/mcp/board-import-tool.js +14 -4
- package/dist/mcp/board-import-tool.js.map +1 -1
- package/dist/mcp/copper-summary.d.ts +2 -0
- package/dist/mcp/copper-summary.js +4 -2
- package/dist/mcp/copper-summary.js.map +1 -1
- package/dist/mcp/create-part.d.ts +23 -0
- package/dist/mcp/create-part.js +1 -0
- package/dist/mcp/create-part.js.map +1 -1
- package/dist/mcp/fast-summary.d.ts +3 -0
- package/dist/mcp/fast-summary.js +46 -0
- package/dist/mcp/fast-summary.js.map +1 -0
- package/dist/mcp/guide.d.ts +3 -1
- package/dist/mcp/guide.js +15 -4
- package/dist/mcp/guide.js.map +1 -1
- package/dist/mcp/model-tool.d.ts +31 -0
- package/dist/mcp/model-tool.js +27 -0
- package/dist/mcp/model-tool.js.map +1 -0
- package/dist/mcp/render-tool.d.ts +33 -2
- package/dist/mcp/render-tool.js +21 -5
- package/dist/mcp/render-tool.js.map +1 -1
- package/dist/mcp/server.js +20 -8
- package/dist/mcp/server.js.map +1 -1
- package/dist/mcp/sheet-card-tools.d.ts +3 -1
- package/dist/mcp/sheet-card-tools.js +3 -1
- package/dist/mcp/sheet-card-tools.js.map +1 -1
- package/dist/mcp/simulate-tool.d.ts +10 -0
- package/dist/mcp/simulate-tool.js +12 -0
- package/dist/mcp/simulate-tool.js.map +1 -0
- package/dist/render/render.js +11327 -1645
- package/dist/studio/change-route.d.ts +18 -0
- package/dist/studio/change-route.js +24 -0
- package/dist/studio/change-route.js.map +1 -0
- package/dist/studio/http-error.d.ts +5 -0
- package/dist/studio/http-error.js +9 -0
- package/dist/studio/http-error.js.map +1 -0
- package/dist/studio/live.d.ts +2 -0
- package/dist/studio/live.js.map +1 -1
- package/dist/studio/server.js +43 -15
- package/dist/studio/server.js.map +1 -1
- package/dist/studio/verify-routes.d.ts +42 -0
- package/dist/studio/verify-routes.js +110 -0
- package/dist/studio/verify-routes.js.map +1 -0
- package/dist/version.d.ts +1 -1
- package/dist/version.js +1 -1
- package/library/modules/CanNode/CanNode.sheet.tsx +1 -1
- package/library/modules/CanNode/parts/MCP2515-I-SO/MCP2515_I_SO.tsx +1 -0
- package/library/modules/CanNode/parts/MCP2515-I-SO/part.yaml +2 -0
- package/library/modules/CanNode/parts/MCP2515-I-SO/verification.md +2 -1
- package/library/modules/CanNode/parts/TJA1051T-3/TJA1051T_3.tsx +1 -0
- package/library/modules/CanNode/parts/TJA1051T-3/part.yaml +2 -0
- package/library/modules/CanNode/parts/TJA1051T-3/verification.md +2 -1
- package/library/modules/DigitalInput24V/DigitalInput24V.sheet.tsx +7 -7
- package/library/modules/RelayDriver/RelayDriver.sheet.tsx +3 -3
- package/library/modules/RelayDriver/parts/AO3400A/part.yaml +34 -0
- package/library/modules/RelayDriver/parts/AO3400A/verification.md +11 -1
- package/library/modules/RelayDriver/parts/SRD-12VDC-SL-C/SRD_12VDC_SL_C.tsx +1 -0
- package/library/modules/RelayDriver/parts/SRD-12VDC-SL-C/part.yaml +14 -0
- package/library/modules/RelayDriver/parts/SRD-12VDC-SL-C/verification.md +4 -1
- package/package.json +2 -1
- package/skills/copperflow/references/copper.md +8 -0
- package/skills/copperflow/references/design-rules.md +57 -6
- package/skills/copperflow/references/editable-subset.md +18 -8
- package/skills/copperflow/references/modules.md +26 -0
- package/skills/copperflow/references/parts-library.md +2 -1
- package/skills/copperflow/references/writing-circuits.md +9 -0
- package/dist/app/assets/NewPartDialog-C4sKWnGI.js +0 -160
- package/dist/app/assets/index-BgzJedaB.css +0 -1
- package/dist/app/assets/index-C_U9me2P.js +0 -19
|
@@ -0,0 +1 @@
|
|
|
1
|
+
{"version":3,"file":"verify-routes.js","sourceRoot":"","sources":["../../src/studio/verify-routes.ts"],"names":[],"mappings":"AAAA,gHAAgH;AAChH,iHAAiH;AACjH,sGAAsG;AACtG,OAAO,EAAE,QAAQ,EAAE,QAAQ,EAAE,IAAI,EAAE,MAAM,kBAAkB,CAAA;AAC3D,OAAO,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAA;AACzC,OAAO,EAAE,gBAAgB,EAAE,cAAc,EAAE,SAAS,EAAE,YAAY,EAAE,YAAY,EAAE,SAAS,EAAE,MAAM,2BAA2B,CAAA;AAC9H,OAAO,EAAE,QAAQ,EAAE,MAAM,wBAAwB,CAAA;AACjD,OAAO,EAAE,eAAe,EAAE,MAAM,qBAAqB,CAAA;AACrD,OAAO,EAAE,WAAW,EAAE,cAAc,EAAE,cAAc,EAAE,UAAU,EAAE,SAAS,EAAE,OAAO,EAAE,kBAAkB,EAAE,iBAAiB,EAAE,QAAQ,EAAa,MAAM,oBAAoB,CAAA;AAC5K,OAAO,EAAE,iBAAiB,EAAE,MAAM,8BAA8B,CAAA;AAChE,OAAO,EAAE,iBAAiB,EAAE,MAAM,+BAA+B,CAAA;AAEjE,OAAO,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAA;AAE3C,MAAM,SAAS,GAAG,iBAAiB,CAAA;AACnC,sDAAsD;AACtD,MAAM,aAAa,GAAG,EAAE,GAAG,IAAI,GAAG,IAAI,CAAA;AAetC,2HAA2H;AAC3H,MAAM,CAAC,KAAK,UAAU,UAAU,CAAC,IAAY,EAAE,EAAU;IACvD,MAAM,IAAI,GAAG,MAAM,QAAQ,CAAC,IAAI,EAAE,EAAE,CAAC,CAAA;IACrC,MAAM,aAAa,GAAG,MAAM,iBAAiB,CAAC,IAAI,EAAE,EAAE,EAAE,IAAI,CAAC,CAAA;IAC7D,MAAM,SAAS,GAAG,MAAM,QAAQ,CAAC,IAAI,CAAC,OAAO,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,SAAS,CAAC,EAAE,MAAM,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAA;IAC5F,MAAM,KAAK,GAAG,aAAa,KAAK,SAAS,CAAC,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,iBAAiB,CAAC,GAAG,SAAS,IAAI,EAAE,IAAI,cAAc,EAAE,EAAE,aAAa,CAAC,CAAA;IACxJ,OAAO;QACL,EAAE;QACF,IAAI;QACJ,SAAS;QACT,IAAI,EAAE,WAAW,CAAC,IAAI,EAAE,aAAa,CAAC;QACtC,QAAQ,EAAE,UAAU,CAAC,IAAI,EAAE,aAAa,CAAC;QACzC,GAAG,CAAC,OAAO,IAAI,KAAK,CAAC,CAAC,CAAC,EAAE,cAAc,EAAE,KAAK,CAAC,KAAK,EAAE,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,KAAK,EAAE,CAAC;QAC9E,GAAG,CAAC,CAAC,CAAC,OAAO,IAAI,KAAK,CAAC,IAAI,KAAK,CAAC,WAAW,CAAC,CAAC,CAAC,EAAE,WAAW,EAAE,kBAAkB,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;KAC7F,CAAA;AACH,CAAC;AAUD;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,aAAa,CAAC,IAAY,EAAE,OAAoB;IACpE,MAAM,EAAE,EAAE,EAAE,GAAG,OAAO,CAAA;IACtB,MAAM,IAAI,GAAG,IAAI,CAAC,OAAO,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,SAAS,CAAC,CAAA;IAC/C,MAAM,IAAI,GAAG,MAAM,aAAa,CAAC,IAAI,EAAE,EAAE,CAAC,CAAA;IAC1C,IAAI,IAAI,KAAK,OAAO,CAAC,KAAK;QAAE,OAAO,EAAE,OAAO,EAAE,IAAI,EAAE,CAAA;IACpD,MAAM,IAAI,GAAG,MAAM,QAAQ,CAAC,IAAI,EAAE,EAAE,CAAC,CAAA;IACrC,MAAM,aAAa,GAAG,MAAM,iBAAiB,CAAC,IAAI,EAAE,EAAE,EAAE,IAAI,CAAC,CAAA;IAC7D,IAAI,UAAU,CAAC,IAAI,EAAE,aAAa,CAAC;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,QAAQ,EAAE,uCAAuC,CAAC,CAAA;IAChH,IAAI,gBAAgB,CAAC,IAAI,CAAC,KAAK,SAAS,EAAE,CAAC;QACzC,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,SAAS,IAAI,EAAE,IAAI,SAAS,4GAA4G,CAAC,CAAA;IACvK,CAAC;IACD,MAAM,IAAI,GAAG,WAAW,CAAC,IAAI,EAAE,aAAa,CAAC,CAAA;IAC7C,MAAM,IAAI,GAAG,YAAY,CAAC,IAAI,EAAE,IAAI,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,YAAY,CAAC,IAAI,EAAE,IAAI,CAAC,CAAA;IACvE,MAAM,IAAI,GAAG,SAAS,CAAC,IAAI,EAAE,OAAO,CAAC,KAAK,EAAE,OAAO,CAAC,MAAM,CAAC,CAAA;IAC3D,IAAI,SAAS,IAAI,IAAI;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,SAAS,iBAAiB,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,CAAA;IACtH,MAAM,eAAe,CAAC,IAAI,EAAE,IAAI,CAAC,IAAI,CAAC,CAAA;IACtC,OAAO,EAAE,SAAS,EAAE,IAAI,CAAC,IAAI,EAAE,CAAA;AACjC,CAAC;AAED,4HAA4H;AAC5H,MAAM,CAAC,KAAK,UAAU,gBAAgB,CAAC,IAAY,EAAE,EAAU;IAC7D,MAAM,IAAI,GAAG,MAAM,aAAa,CAAC,IAAI,CAAC,OAAO,CAAC,IAAI,EAAE,EAAE,CAAC,EAAE,SAAS,CAAC,EAAE,EAAE,CAAC,CAAA;IACxE,MAAM,IAAI,GAAG,MAAM,QAAQ,CAAC,IAAI,EAAE,EAAE,CAAC,CAAA;IACrC,MAAM,IAAI,GAAG,SAAS,CAAC,IAAI,EAAE,WAAW,CAAC,IAAI,EAAE,MAAM,iBAAiB,CAAC,IAAI,EAAE,EAAE,EAAE,IAAI,CAAC,CAAC,CAAC,CAAA;IACxF,IAAI,IAAI,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,SAAS,CAAA;IACvC,MAAM,GAAG,GAAG,cAAc,CAAC,IAAI,CAAC,CAAC,MAAM,CAAA;IACvC,OAAO,GAAG,IAAI,CAAC,MAAM,OAAO,GAAG,QAAQ,GAAG,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,OAAO,SAAS,IAAI,IAAI,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,KAAK,iFAAiF,CAAA;AAClM,CAAC;AAED,KAAK,UAAU,aAAa,CAAC,IAAY,EAAE,EAAU;IACnD,IAAI,CAAC;QACH,OAAO,MAAM,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC,CAAA;IACrC,CAAC;IAAC,OAAO,KAAK,EAAE,CAAC;QACf,IAAK,KAA+B,CAAC,IAAI,KAAK,QAAQ;YAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,SAAS,IAAI,EAAE,IAAI,SAAS,aAAa,CAAC,CAAA;QAC9H,MAAM,KAAK,CAAA;IACb,CAAC;AACH,CAAC;AAED;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,YAAY,CAAC,IAAY,EAAE,EAAU,EAAE,IAAY;IACvE,MAAM,IAAI,GAAG,MAAM,QAAQ,CAAC,IAAI,EAAE,EAAE,CAAC,CAAA;IACrC,MAAM,QAAQ,GAAG,IAAI,CAAC,SAAS,EAAE,IAAI,CAAA;IACrC,IAAI,QAAQ,KAAK,SAAS;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,QAAQ,EAAE,4BAA4B,CAAC,CAAA;IAC5F,IAAI,IAAI,KAAK,QAAQ;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,IAAI,IAAI,CAAC,KAAK,CAAC,CAAC,EAAE,GAAG,CAAC,iDAAiD,EAAE,EAAE,CAAC,CAAA;IAC5H,MAAM,KAAK,GAAG,GAAG,SAAS,IAAI,EAAE,IAAI,QAAQ,EAAE,CAAA;IAC9C,IAAI,CAAC,cAAc,CAAC,IAAI,CAAC,QAAQ,CAAC,IAAI,QAAQ,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,yBAAyB,CAAC,CAAA;IAC1H,MAAM,MAAM,GAAG,MAAM,QAAQ,CAAC,OAAO,CAAC,IAAI,EAAE,EAAE,CAAC,CAAC,CAAA;IAChD,wGAAwG;IACxG,IAAI,CAAC,QAAQ,CAAC,MAAM,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,CAAC;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,SAAS,IAAI,EAAE,2BAA2B,CAAC,CAAA;IACpH,MAAM,MAAM,GAAG,MAAM,QAAQ,CAAC,IAAI,CAAC,MAAM,EAAE,QAAQ,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,SAAS,CAAC,CAAA;IAC5E,IAAI,MAAM,KAAK,SAAS;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,eAAe,CAAC,CAAA;IAC3E,IAAI,OAAO,CAAC,MAAM,CAAC,KAAK,MAAM;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,iCAAiC,CAAC,CAAA;IACnG,MAAM,IAAI,GAAG,MAAM,IAAI,CAAC,MAAM,CAAC,CAAA;IAC/B,IAAI,CAAC,IAAI,CAAC,MAAM,EAAE;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,gBAAgB,CAAC,CAAA;IACtE,IAAI,IAAI,CAAC,IAAI,GAAG,aAAa;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,mBAAmB,aAAa,GAAG,IAAI,GAAG,IAAI,KAAK,CAAC,CAAA;IACpH,MAAM,KAAK,GAAG,MAAM,QAAQ,CAAC,MAAM,CAAC,CAAA;IACpC,IAAI,KAAK,CAAC,QAAQ,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC,QAAQ,CAAC,KAAK,OAAO;QAAE,MAAM,IAAI,SAAS,CAAC,GAAG,EAAE,GAAG,KAAK,eAAe,CAAC,CAAA;IAC1G,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,KAAK,EAAE,CAAA;AAClC,CAAC"}
|
package/dist/version.d.ts
CHANGED
|
@@ -1 +1 @@
|
|
|
1
|
-
export declare const VERSION = "0.
|
|
1
|
+
export declare const VERSION = "0.4.1";
|
package/dist/version.js
CHANGED
|
@@ -1,2 +1,2 @@
|
|
|
1
|
-
export const VERSION = "0.
|
|
1
|
+
export const VERSION = "0.4.1";
|
|
2
2
|
//# sourceMappingURL=version.js.map
|
|
@@ -2,7 +2,7 @@ import { MCP2515_I_SO } from "./parts/MCP2515-I-SO/MCP2515_I_SO"
|
|
|
2
2
|
import { TJA1051T_3 } from "./parts/TJA1051T-3/TJA1051T_3"
|
|
3
3
|
export default function CanNode() {
|
|
4
4
|
return (
|
|
5
|
-
<sheet does="CAN node: MCP2515 on 3.3 V, 8 MHz crystal (CL 18 pF, 27 pF caps), TJA1051T/3 with VIO 3.3 V and VCC 5 V, 120 ohm termination to the TERM port" sources={["https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Stand-Alone-CAN-Controller-with-SPI-20001801J.pdf (p1 pinout, p4 Table 1-1)","https://www.nxp.com/docs/en/data-sheet/TJA1051.pdf (p4 Table 3; S low selects Normal mode, p5)","https://abracon.com/Resonators/abl.pdf (ABL HC49/US: CL 18 pF, C0 7 pF max, p1)"]}>
|
|
5
|
+
<sheet does="CAN node: MCP2515 on 3.3 V, 8 MHz crystal (CL 18 pF, 27 pF caps), TJA1051T/3 with VIO 3.3 V and VCC 5 V, 120 ohm termination to the TERM port" sources={["https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Stand-Alone-CAN-Controller-with-SPI-20001801J.pdf (p1 pinout, p4 Table 1-1)","https://www.nxp.com/docs/en/data-sheet/TJA1051.pdf (p4 Table 3; S low selects Normal mode, p5)","https://abracon.com/Resonators/abl.pdf (ABL HC49/US: CL 18 pF, C0 7 pF max, p1)"]} cases={[{ name: "termination: 1 V across CANH and TERM", set: { V5: 5, V3V3: 3.3, GND: 0, CANH: 1, TERM: 0 }, expect: { "R2.i": [0.0083, 0.00837] } }, { name: "supplies reach the pins", set: { V5: 5, V3V3: 3.3, GND: 0 }, expect: { RESET: [3.29, 3.31], V3V3: [3.29, 3.31], V5: [4.99, 5.01] } }]}>
|
|
6
6
|
<port name="V5" type="power_in" carries="5 V in, 70 mA at most (transceiver, bus dominant)" />
|
|
7
7
|
<port name="V3V3" type="power_in" carries="3.3 V in, 10 mA (controller 5 mA typ, VIO)" />
|
|
8
8
|
<port name="GND" type="ground" carries="logic and bus ground" />
|
|
@@ -5,6 +5,7 @@ export const MCP2515_I_SO = (props: { name: string; [prop: string]: unknown }) =
|
|
|
5
5
|
manufacturerPartNumber={"MCP2515-I/SO"}
|
|
6
6
|
pinLabels={{"pin1":"TXCAN","pin2":"RXCAN","pin3":"CLKOUT","pin4":"TX0RTS","pin5":"TX1RTS","pin6":"TX2RTS","pin7":"OSC2","pin8":"OSC1","pin9":"VSS","pin10":"RX1BF","pin11":"RX0BF","pin12":"INT","pin13":"SCK","pin14":"SI","pin15":"SO","pin16":"CS","pin17":"RESET","pin18":"VDD"}}
|
|
7
7
|
pinAttributes={{"pin1":{"isOutput":true},"pin2":{"isInput":true},"pin3":{"isOutput":true},"pin4":{"isInput":true},"pin5":{"isInput":true},"pin6":{"isInput":true},"pin7":{"isOutput":true},"pin8":{"isInput":true},"pin9":{"requiresGround":true},"pin10":{"isOutput":true},"pin11":{"isOutput":true},"pin12":{"isOutput":true},"pin13":{"isInput":true},"pin14":{"isInput":true},"pin15":{"isOutput":true},"pin16":{"isInput":true},"pin17":{"isInput":true},"pin18":{"requiresPower":true}}}
|
|
8
|
+
height={2.65}
|
|
8
9
|
{...props}
|
|
9
10
|
/>
|
|
10
11
|
)
|
|
@@ -1,7 +1,7 @@
|
|
|
1
1
|
# Verification of MCP2515 stand-alone CAN controller with SPI, SOIC-18 wide
|
|
2
2
|
|
|
3
3
|
Status: not verified
|
|
4
|
-
Content:
|
|
4
|
+
Content: 1cf0d2ad3ec8 (changes when part.yaml changes)
|
|
5
5
|
|
|
6
6
|
Check each item against the datasheet and write the page next to it. When everything is
|
|
7
7
|
checked, run in a terminal: copperflow parts verify MCP2515-I-SO --by "<your name>" --against "<datasheet, revision, page>"
|
|
@@ -26,6 +26,7 @@ checked, run in a terminal: copperflow parts verify MCP2515-I-SO --by "<your nam
|
|
|
26
26
|
- [ ] Pin 17 is RESET (input)
|
|
27
27
|
- [ ] Pin 18 is VDD (power in)
|
|
28
28
|
- [ ] Footprint soic18w matches the package drawing
|
|
29
|
+
- [ ] Height 2.65 mm, p82, 18-lead SOIC 7.50 mm body, overall height A max 2.65 mm: compare
|
|
29
30
|
|
|
30
31
|
## Notes
|
|
31
32
|
|
|
@@ -5,6 +5,7 @@ export const TJA1051T_3 = (props: { name: string; [prop: string]: unknown }) =>
|
|
|
5
5
|
manufacturerPartNumber={"TJA1051T/3/1J"}
|
|
6
6
|
pinLabels={{"pin1":"TXD","pin2":"GND","pin3":"VCC","pin4":"RXD","pin5":"VIO","pin6":"CANL","pin7":"CANH","pin8":"S"}}
|
|
7
7
|
pinAttributes={{"pin1":{"isInput":true},"pin2":{"requiresGround":true},"pin3":{"requiresPower":true},"pin4":{"isOutput":true},"pin5":{"requiresPower":true},"pin6":{"isBidirectional":true},"pin7":{"isBidirectional":true},"pin8":{"isInput":true}}}
|
|
8
|
+
height={1.75}
|
|
8
9
|
{...props}
|
|
9
10
|
/>
|
|
10
11
|
)
|
|
@@ -1,7 +1,7 @@
|
|
|
1
1
|
# Verification of TJA1051T/3 high-speed CAN transceiver with VIO, SO8
|
|
2
2
|
|
|
3
3
|
Status: not verified
|
|
4
|
-
Content:
|
|
4
|
+
Content: 7fd5fc15d390 (changes when part.yaml changes)
|
|
5
5
|
|
|
6
6
|
Check each item against the datasheet and write the page next to it. When everything is
|
|
7
7
|
checked, run in a terminal: copperflow parts verify TJA1051T-3 --by "<your name>" --against "<datasheet, revision, page>"
|
|
@@ -16,6 +16,7 @@ checked, run in a terminal: copperflow parts verify TJA1051T-3 --by "<your name>
|
|
|
16
16
|
- [ ] Pin 7 is CANH (bidirectional)
|
|
17
17
|
- [ ] Pin 8 is S (input)
|
|
18
18
|
- [ ] Footprint soic8 matches the package drawing
|
|
19
|
+
- [ ] Height 1.75 mm, p15, Fig 9, SOT96-1 (SO8), A max 1.75 mm: compare
|
|
19
20
|
|
|
20
21
|
## Where each item was read
|
|
21
22
|
|
|
@@ -1,12 +1,12 @@
|
|
|
1
1
|
export default function DigitalInput24V() {
|
|
2
2
|
return (
|
|
3
|
-
<sheet does="24 V digital input:
|
|
4
|
-
<port name="IN" type="input" carries="0 to 30 V from the field;
|
|
5
|
-
<port name="OUT" type="output" carries="
|
|
6
|
-
<port name="GND" type="ground" carries="field and logic ground,
|
|
7
|
-
<resistor name="R1" resistance="
|
|
8
|
-
<resistor name="R2" resistance="
|
|
9
|
-
<diode name="D1" manufacturerPartNumber="BZT52C3V6-7-F" footprint="sod123" pcbX={4.5} pcbY={0} pcbRotation={0} />
|
|
3
|
+
<sheet does="24 V digital input: 4.53k/1k divider, BZT52C3V6 zener across the 1k, 1k/100nF RC out; low at 5 V, high from 15 V, 3.07 to 3.45 V and 4.6 mA at 24 V" sources={["https://www.diodes.com/assets/Datasheets/ds18004.pdf (BZT52C3V6: 3.4 to 3.8 V at 5 mA, ZZT 90 ohm max, p2; typical curves Fig. 2, p3)","IEC 61131-2 type 1 input: on at 15 to 30 V, off below 5 V","YAGEO RC_L chip resistors: 1206 rated 1/4 W at 70 C (R1 takes 157 mW at 30 V)"]} cases={[{"name":"5 V in reads low","set":{"IN":5,"GND":0},"expect":{"OUT":[0,0.99]}},{"name":"15 V in reads high","set":{"IN":15,"GND":0},"expect":{"OUT":[2.31,3.6]}},{"name":"24 V in","set":{"IN":24,"GND":0},"expect":{"OUT":[3,3.5],"R1.i":[0.0045,0.0047]}},{"name":"30 V in stays under the pin limit","set":{"IN":30,"GND":0},"expect":{"OUT":[0,3.6],"R1.p":[0,0.25]}}]}>
|
|
4
|
+
<port name="IN" type="input" carries="0 to 30 V from the field; 4.6 mA at 24 V, 5.9 mA at 30 V" />
|
|
5
|
+
<port name="OUT" type="output" carries="3.3 V logic: low at 5 V in, high from 15 V, at most 3.53 V; 870 Hz low pass" />
|
|
6
|
+
<port name="GND" type="ground" carries="field and logic ground, 6 mA at most" />
|
|
7
|
+
<resistor name="R1" resistance="4.53k" footprint="1206" pcbX={8.5} pcbY={2.6} pcbRotation={180} />
|
|
8
|
+
<resistor name="R2" resistance="1k" footprint="0603" pcbX={4.5} pcbY={2.1} pcbRotation={180} />
|
|
9
|
+
<diode name="D1" manufacturerPartNumber="BZT52C3V6-7-F" footprint="sod123" pcbX={4.5} pcbY={0} pcbRotation={0} vf="0.9V" vfAt="10mA" vz="3.6V" vzAt="5mA" zz="90" pdmax="370mW" />
|
|
10
10
|
<resistor name="R3" resistance="1k" footprint="0603" pcbX={1.25} pcbY={2.1} pcbRotation={180} />
|
|
11
11
|
<capacitor name="C1" capacitance="100nF" footprint="0603" pcbX={0} pcbY={0} pcbRotation={0} />
|
|
12
12
|
<trace from="R1.pin1" to="net.IN" />
|
|
@@ -2,7 +2,7 @@ import { SRD_12VDC_SL_C } from "./parts/SRD-12VDC-SL-C/SRD_12VDC_SL_C"
|
|
|
2
2
|
import { AO3400A } from "./parts/AO3400A/AO3400A"
|
|
3
3
|
export default function RelayDriver() {
|
|
4
4
|
return (
|
|
5
|
-
<sheet does="12 V SPDT relay switched by 3.3 V or 5 V logic: AO3400A low side (RDS(on) spec at 2.5 V), 1N4148W flyback, 100k pull-down, LED on while driven" sources={["https://www.circuitbasics.com/wp-content/uploads/2015/11/SRD-05VDC-SL-C-Datasheet.pdf (Songle SRD: p1 drilling and wiring, p2 coil 12 V 400 ohm 30 mA, contacts)","https://www.aosmd.com/res/datasheets/AO3400A.pdf (p2: VGS(th) 1.45 V max, RDS(on) < 48 mOhm at VGS 2.5 V)","https://www.diodes.com/assets/Datasheets/ds30086.pdf (1N4148W-7-F, SOD123, p1)","https://www.kingbrightusa.com/images/catalog/SPEC/APTD1608LZGCK.pdf (p2: VF 2.65 V typ at 2 mA)"]}>
|
|
5
|
+
<sheet does="12 V SPDT relay switched by 3.3 V or 5 V logic: AO3400A low side (RDS(on) spec at 2.5 V), 1N4148W flyback, 100k pull-down, LED on while driven" sources={["https://www.circuitbasics.com/wp-content/uploads/2015/11/SRD-05VDC-SL-C-Datasheet.pdf (Songle SRD: p1 drilling and wiring, p2 coil 12 V 400 ohm 30 mA, contacts)","https://www.aosmd.com/res/datasheets/AO3400A.pdf (p2: VGS(th) 1.45 V max, RDS(on) < 48 mOhm at VGS 2.5 V)","https://www.diodes.com/assets/Datasheets/ds30086.pdf (1N4148W-7-F, SOD123, p1)","https://www.kingbrightusa.com/images/catalog/SPEC/APTD1608LZGCK.pdf (p2: VF 2.65 V typ at 2 mA)"]} cases={[{ name: "3.3 V control", set: { V12: 12, GND: 0, CTRL: 3.3 }, expect: { "K1.coil.i": [0.027, 0.033], "Q1.vgs": [2.5, 12], "LED1.i": [0.0015, 0.0025] } }, { name: "5 V control", set: { V12: 12, GND: 0, CTRL: 5 }, expect: { "K1.coil.i": [0.027, 0.033], "Q1.vgs": [2.5, 12], "LED1.i": [0.0015, 0.0025] } }, { name: "0 V control", set: { V12: 12, GND: 0, CTRL: 0 }, expect: { "K1.coil.i": [0, 0.0001], "LED1.i": [-0.000001, 0.00001] } }, { name: "control open", set: { V12: 12, GND: 0, CTRL: "open" }, expect: { "K1.coil.i": [0, 0.0001], "LED1.i": [-0.000001, 0.00001] } }]}>
|
|
6
6
|
<port name="V12" type="power_in" carries="12 V in, 33 mA (coil 30 mA, LED 2 mA)" />
|
|
7
7
|
<port name="GND" type="ground" carries="return of coil and logic, 33 mA" />
|
|
8
8
|
<port name="CTRL" type="input" carries="0 off; 3.3 V or 5 V logic on, 0.03 mA; open is off" />
|
|
@@ -11,11 +11,11 @@ export default function RelayDriver() {
|
|
|
11
11
|
<port name="NC" type="passive" carries="normally closed contact, open while CTRL is high, 10 A at most" />
|
|
12
12
|
<SRD_12VDC_SL_C name="K1" pcbX={0} pcbY={0} pcbRotation={0} />
|
|
13
13
|
<AO3400A name="Q1" pcbX={-12} pcbY={-5} pcbRotation={0} />
|
|
14
|
-
<diode name="D1" manufacturerPartNumber="1N4148W-7-F" footprint="sod123" pcbX={-11.15} pcbY={0} pcbRotation={90} />
|
|
14
|
+
<diode name="D1" manufacturerPartNumber="1N4148W-7-F" vf="0.715V" vfAt="1mA" vf2="0.855V" vf2At="10mA" ifmax="300mA" pdmax="400mW" footprint="sod123" pcbX={-11.15} pcbY={0} pcbRotation={90} />
|
|
15
15
|
<resistor name="R1" resistance="100" footprint="0603" pcbX={-12.25} pcbY={-7.85} pcbRotation={180} />
|
|
16
16
|
<resistor name="R2" resistance="100k" footprint="0603" pcbX={-9} pcbY={-9} pcbRotation={0} />
|
|
17
17
|
<resistor name="R3" resistance="4.7k" footprint="0603" pcbX={-7} pcbY={9} pcbRotation={180} />
|
|
18
|
-
<led name="LED1" color="green" manufacturerPartNumber="APTD1608LZGCK" footprint="0603" pcbX={-10.8} pcbY={4.3} pcbRotation={270} />
|
|
18
|
+
<led name="LED1" color="green" manufacturerPartNumber="APTD1608LZGCK" vf="2.65V" vfAt="2mA" ifmax="25mA" pdmax="102.5mW" footprint="0603" pcbX={-10.8} pcbY={4.3} pcbRotation={270} />
|
|
19
19
|
<trace from="K1.COIL1" to="net.V12" />
|
|
20
20
|
<trace from="D1.cathode" to="net.V12" />
|
|
21
21
|
<trace from="R3.pin1" to="net.V12" />
|
|
@@ -19,3 +19,37 @@ datasheet:
|
|
|
19
19
|
url: https://www.aosmd.com/res/datasheets/AO3400A.pdf
|
|
20
20
|
title: AO3400A datasheet
|
|
21
21
|
datasheet_pages: 1 (SOT23 pin drawing), 2 (VGS(th), RDS(on))
|
|
22
|
+
model:
|
|
23
|
+
kind: nmos
|
|
24
|
+
pins:
|
|
25
|
+
gate: G
|
|
26
|
+
source: S
|
|
27
|
+
drain: D
|
|
28
|
+
figures:
|
|
29
|
+
vth:
|
|
30
|
+
value: 1.45
|
|
31
|
+
source: p2, Electrical Characteristics, VGS(th) max
|
|
32
|
+
rdson:
|
|
33
|
+
value: 0.048
|
|
34
|
+
source: p2, Electrical Characteristics, RDS(ON) max at VGS 2.5 V
|
|
35
|
+
rdsonAt:
|
|
36
|
+
value: 2.5
|
|
37
|
+
source: p2, Electrical Characteristics, RDS(ON) at VGS 2.5 V
|
|
38
|
+
vsd:
|
|
39
|
+
value: 1
|
|
40
|
+
source: p2, Electrical Characteristics, VSD max at IS 1 A
|
|
41
|
+
vsdAt:
|
|
42
|
+
value: 1
|
|
43
|
+
source: p2, Electrical Characteristics, VSD at IS 1 A
|
|
44
|
+
vdsmax:
|
|
45
|
+
value: 30
|
|
46
|
+
source: p1, Absolute Maximum Ratings, VDS
|
|
47
|
+
vgsmax:
|
|
48
|
+
value: 12
|
|
49
|
+
source: p1, Absolute Maximum Ratings, VGS
|
|
50
|
+
idmax:
|
|
51
|
+
value: 5.7
|
|
52
|
+
source: p1, Absolute Maximum Ratings, ID at TA 25 C
|
|
53
|
+
pdmax:
|
|
54
|
+
value: 1.4
|
|
55
|
+
source: p1, Absolute Maximum Ratings, PD at TA 25 C
|
|
@@ -1,7 +1,7 @@
|
|
|
1
1
|
# Verification of AO3400A 30 V N-channel MOSFET, RDS(on) < 48 mOhm at VGS 2.5 V
|
|
2
2
|
|
|
3
3
|
Status: not verified
|
|
4
|
-
Content:
|
|
4
|
+
Content: 07c6bbd2c035 (changes when part.yaml changes)
|
|
5
5
|
|
|
6
6
|
Check each item against the datasheet and write the page next to it. When everything is
|
|
7
7
|
checked, run in a terminal: copperflow parts verify AO3400A --by "<your name>" --against "<datasheet, revision, page>"
|
|
@@ -12,6 +12,16 @@ checked, run in a terminal: copperflow parts verify AO3400A --by "<your name>" -
|
|
|
12
12
|
- [ ] Pin 3 is D (passive)
|
|
13
13
|
- [ ] Footprint sot23 matches the package drawing
|
|
14
14
|
- [ ] lcsc part C20917 is this exact part
|
|
15
|
+
- [ ] Model nmos pins: gate G, source S, drain D
|
|
16
|
+
- [ ] Model vth 1.45 V, p2, Electrical Characteristics, VGS(th) max: compare
|
|
17
|
+
- [ ] Model rdson 48.0 mΩ, p2, Electrical Characteristics, RDS(ON) max at VGS 2.5 V: compare
|
|
18
|
+
- [ ] Model rdsonAt 2.50 V, p2, Electrical Characteristics, RDS(ON) at VGS 2.5 V: compare
|
|
19
|
+
- [ ] Model vsd 1.00 V, p2, Electrical Characteristics, VSD max at IS 1 A: compare
|
|
20
|
+
- [ ] Model vsdAt 1.00 A, p2, Electrical Characteristics, VSD at IS 1 A: compare
|
|
21
|
+
- [ ] Model vdsmax 30.0 V, p1, Absolute Maximum Ratings, VDS: compare
|
|
22
|
+
- [ ] Model vgsmax 12.0 V, p1, Absolute Maximum Ratings, VGS: compare
|
|
23
|
+
- [ ] Model idmax 5.70 A, p1, Absolute Maximum Ratings, ID at TA 25 C: compare
|
|
24
|
+
- [ ] Model pdmax 1.40 W, p1, Absolute Maximum Ratings, PD at TA 25 C: compare
|
|
15
25
|
|
|
16
26
|
## Where each item was read
|
|
17
27
|
|
|
@@ -6,6 +6,7 @@ export const SRD_12VDC_SL_C = (props: { name: string; [prop: string]: unknown })
|
|
|
6
6
|
supplierPartNumbers={{"lcsc":["C30431"]}}
|
|
7
7
|
pinLabels={{"pin1":"COM","pin2":"COIL1","pin3":"COIL2","pin4":"NO","pin5":"NC"}}
|
|
8
8
|
pinAttributes={{"pin1":{"isPassive":true},"pin2":{"isPassive":true},"pin3":{"isPassive":true},"pin4":{"isPassive":true},"pin5":{"isPassive":true}}}
|
|
9
|
+
height={15.3}
|
|
9
10
|
{...props}
|
|
10
11
|
/>
|
|
11
12
|
)
|
|
@@ -7,6 +7,8 @@ manufacturer: Ningbo Songle Relay
|
|
|
7
7
|
mpn: SRD-12VDC-SL-C
|
|
8
8
|
origin: written 2026-11-17
|
|
9
9
|
footprint: footprint.yaml
|
|
10
|
+
height: 15.3
|
|
11
|
+
height_source: "p1, 5. DIMENSION, body 15.3 mm max"
|
|
10
12
|
pins:
|
|
11
13
|
"1":
|
|
12
14
|
name: COM
|
|
@@ -29,3 +31,15 @@ datasheet:
|
|
|
29
31
|
url: https://www.circuitbasics.com/wp-content/uploads/2015/11/SRD-05VDC-SL-C-Datasheet.pdf
|
|
30
32
|
title: Songle Relay SRD datasheet
|
|
31
33
|
datasheet_pages: 1 (DRILLING and WIRING DIAGRAM), 2 (coil data, contact rating)
|
|
34
|
+
model:
|
|
35
|
+
kind: relay
|
|
36
|
+
pins:
|
|
37
|
+
coil1: COIL1
|
|
38
|
+
coil2: COIL2
|
|
39
|
+
com: COM
|
|
40
|
+
no: NO
|
|
41
|
+
nc: NC
|
|
42
|
+
figures:
|
|
43
|
+
coil:
|
|
44
|
+
value: 400
|
|
45
|
+
source: p2, 6. Coil data chart, SRD high sensitivity 12 V
|
|
@@ -1,7 +1,7 @@
|
|
|
1
1
|
# Verification of Songle SRD relay, 12 V coil (400 ohm, 30 mA), SPDT changeover, 10 A
|
|
2
2
|
|
|
3
3
|
Status: not verified
|
|
4
|
-
Content:
|
|
4
|
+
Content: 0f44efc32ccc (changes when part.yaml or footprint.yaml changes)
|
|
5
5
|
|
|
6
6
|
Check each item against the datasheet and write the page next to it. When everything is
|
|
7
7
|
checked, run in a terminal: copperflow parts verify SRD-12VDC-SL-C --by "<your name>" --against "<datasheet, revision, page>"
|
|
@@ -15,6 +15,9 @@ checked, run in a terminal: copperflow parts verify SRD-12VDC-SL-C --by "<your n
|
|
|
15
15
|
- [ ] Footprint footprint.yaml matches the package drawing
|
|
16
16
|
- [ ] Every pad in footprint.yaml matches the recommended land pattern (position, size, drill)
|
|
17
17
|
- [ ] lcsc part C30431 is this exact part
|
|
18
|
+
- [ ] Height 15.3 mm, p1, 5. DIMENSION, body 15.3 mm max: compare
|
|
19
|
+
- [ ] Model relay pins: coil1 COIL1, coil2 COIL2, com COM, no NO, nc NC
|
|
20
|
+
- [ ] Model coil 400 Ω, p2, 6. Coil data chart, SRD high sensitivity 12 V: compare
|
|
18
21
|
|
|
19
22
|
## Where each item was read
|
|
20
23
|
|
package/package.json
CHANGED
|
@@ -1,6 +1,6 @@
|
|
|
1
1
|
{
|
|
2
2
|
"name": "copperflow",
|
|
3
|
-
"version": "0.
|
|
3
|
+
"version": "0.4.1",
|
|
4
4
|
"description": "Design circuits in code with a human and an AI agent editing the same files.",
|
|
5
5
|
"license": "Apache-2.0",
|
|
6
6
|
"author": "Eren Kürpe",
|
|
@@ -45,6 +45,7 @@
|
|
|
45
45
|
"@babel/parser": "8.1.0",
|
|
46
46
|
"@modelcontextprotocol/sdk": "1.32.2",
|
|
47
47
|
"clipper-lib": "6.4.2",
|
|
48
|
+
"earcut": "3.2.4",
|
|
48
49
|
"esbuild": "0.28.2",
|
|
49
50
|
"magic-string": "1.4.5",
|
|
50
51
|
"yaml": "2.9.1",
|
|
@@ -13,6 +13,14 @@ shapes inside it become keepouts on all layers (not cut out of the board). It an
|
|
|
13
13
|
layer when the largest shape is not the board; `units` overrides the file's; a board that has holes
|
|
14
14
|
or keepouts already needs `replace: true`. Placed parts stay; the answer names those now outside.
|
|
15
15
|
|
|
16
|
+
A KiCad board (`.kicad_pcb`, saved by KiCad 6 or newer, two copper layers) goes in the same tool:
|
|
17
|
+
`import_board` `{ file: "new.circuit.tsx", dxf: "old.kicad_pcb" }` writes `file` as a new circuit in one
|
|
18
|
+
change: the outline from Edge.Cuts, every footprint as a placed part (one library part per land
|
|
19
|
+
pattern, pin list and value, never verified), the nets, tracks, vias and pours. It builds and checks
|
|
20
|
+
the result and answers what it wrote against what the file held, whether every pad kept its net, and
|
|
21
|
+
a list `Not carried over:` by kind and count (silkscreen, texts, 3D models, rules, …). Tell the person
|
|
22
|
+
the parts must be compared with their datasheets before they are verified.
|
|
23
|
+
|
|
16
24
|
## Placing and routing
|
|
17
25
|
|
|
18
26
|
Copper: place the parts first with `autoplace` (one history entry; parts without a position, or
|
|
@@ -87,12 +87,15 @@ globalNets: [GND, V24, V3_3]
|
|
|
87
87
|
left out), and `fabrication.pasteReduction` how far the solder paste shrinks inside each SMD pad
|
|
88
88
|
(0 when left out); both may be 0. The fabrication (Gerber) files use them.
|
|
89
89
|
- `fabrication.placementRotations` adds degrees (counter-clockwise) to the parts' rotation in the
|
|
90
|
-
pick-and-place file, per footprint family: `chip` (0603, 0805 ...), `sod
|
|
91
|
-
`sot223`, `sot89`, `soic`, `sop`, `
|
|
92
|
-
`
|
|
93
|
-
`
|
|
94
|
-
`
|
|
95
|
-
|
|
90
|
+
pick-and-place file, per footprint family: `chip` (0603, 0805 ...), `sod` (also MELF), `sot` (SOT-23
|
|
91
|
+
and the small SOTs), `sot223`, `sot89`, `soic`, `sop`, `ssop`, `tssop`, `msop`, `qsop`, `qfn`, `dfn`,
|
|
92
|
+
`qfp`, `lqfp`, `tqfp`, `bga`, `sma`, `smb`, `smc`, `do214ac`, `do214aa`, `do214ab`, `tant`, `array`,
|
|
93
|
+
`dpak` (also `to252`), `d2pak` (also `to263`), `plcc`, `smdip`, `dip`, `axial` (also `do35` ...),
|
|
94
|
+
`to220`, `to247`, `to126`, `to92`, `hc49`, `hc49s`, `hc49smd`, `xtal`, `radial`, `smdcan`, `ledth`
|
|
95
|
+
(`led3mm`, `led5mm`), `ledsmd` (`led3528`, `led5050`), `pinrow`, `pinrow2x` (two-row headers),
|
|
96
|
+
`socket`, `socket2x`, `screw`, `resonator`, `usb`, `dcjack`, `tact`, `ind` and `file` (footprint files). Left out, `soic`, `sop`, `ssop`, `tssop`,
|
|
97
|
+
`msop` and `qsop` are 270 and `sot` and `sot223` 180, the corrections commonly used for JLCPCB's
|
|
98
|
+
part models; the small SOTs (`sot323`, `sc70`, `sot143` ...) take `sot`'s 180 because they are drawn as SOT-23 is, which has not been checked in the assembly preview for each, so set `sot` to override; every other family is 0. JLCPCB's assembly preview is the final check: set a family only after the
|
|
96
99
|
preview shows its parts turned, for example `placementRotations: { qfn: 270 }`, and `0` takes a
|
|
97
100
|
default back out. A library part drawn with its own footprint file can have
|
|
98
101
|
its own correction by its id under `parts`, which takes the place of the `file` family's for that
|
|
@@ -121,6 +124,47 @@ globalNets: [GND, V24, V3_3]
|
|
|
121
124
|
The `usb-c-ldo` example keeps one class: `power` for `VBUS`, `V3_3` and `GND`, with a 0.4 mm
|
|
122
125
|
track width and 0.2 mm clearance. It names no profile, so the default applies.
|
|
123
126
|
|
|
127
|
+
## Pairs, matched lengths and impedance
|
|
128
|
+
|
|
129
|
+
The router does not route pairs together and does not tune lengths: copperflow knows the classes and checks
|
|
130
|
+
them, and the tracks are yours to route. Calculated impedance is an estimate (about 1 % for a single line,
|
|
131
|
+
about 10 % for a pair, solder mask not counted): for a controlled impedance order, ask the board maker for
|
|
132
|
+
their stack and widths.
|
|
133
|
+
|
|
134
|
+
```yaml
|
|
135
|
+
fabrication:
|
|
136
|
+
boardThickness: 1.6 # the profile's stack; each may be overridden
|
|
137
|
+
permittivity: 4.6
|
|
138
|
+
copperThickness: 0.035
|
|
139
|
+
solderMask: true
|
|
140
|
+
dielectricHeight: 1.53 # under an outer track; on 2 layers the board minus its two coppers when left out
|
|
141
|
+
netClasses:
|
|
142
|
+
can:
|
|
143
|
+
nets: [CANH, CANL]
|
|
144
|
+
pair: by-name # or a list: [[CANH, CANL]]
|
|
145
|
+
differentialImpedance: 120
|
|
146
|
+
gap: 0.2 # the track width then comes from the impedance
|
|
147
|
+
maxSkew: 2
|
|
148
|
+
minCoupled: 80 # percent of the pair's length side by side; 80 when left out
|
|
149
|
+
addr:
|
|
150
|
+
nets: ["A?"]
|
|
151
|
+
matchGroup: addr
|
|
152
|
+
maxSpread: 1
|
|
153
|
+
maxLength: 60
|
|
154
|
+
impedance: 50 # single line
|
|
155
|
+
```
|
|
156
|
+
|
|
157
|
+
- `pair: by-name` pairs names ending in `_P`/`_N`, `+`/`-`, `DP`/`DM` and `H`/`L` (CANH/CANL) within the class.
|
|
158
|
+
- When `impedance` or `differentialImpedance` is given and `trackWidth` is not, the width (and a pair's gap, at
|
|
159
|
+
twice the profile's smallest gap unless `gap` is set) come from the stack; `copper_summary` says so. A target
|
|
160
|
+
the board cannot make (a gap or width under the profile's smallest) is a `rules` warning that says what it needs.
|
|
161
|
+
- The `jlcpcb-4layer` profile has no `dielectricHeight`: set it to calculate there.
|
|
162
|
+
- A length runs pad to pad along the joined copper, the farthest two pads of the net; a via adds the board's thickness.
|
|
163
|
+
|
|
164
|
+
To work with a pair: declare the class, route the two nets by hand with `route_track` side by side at the class's
|
|
165
|
+
width and gap (or let `autoroute` route them and read the checks), read `check_circuit` and `copper_summary`, and
|
|
166
|
+
fix a finding by re-routing. `copperflow impedance --single 50 --pair 90` prints the calculation for the project.
|
|
167
|
+
|
|
124
168
|
## What the checks report
|
|
125
169
|
|
|
126
170
|
`copperflow check`, the agent's `check_circuit` and the Studio Checks panel (the `\` key) show the
|
|
@@ -150,6 +194,13 @@ position. Anything a check cannot evaluate is reported as `unchecked`, never sil
|
|
|
150
194
|
| `silk-on-pad` | warning | Silkscreen lies on a pad, closer than `minSilkToPad`; or a designator covers pads or another designator (the same findings, in the same words, as `export_fabrication`'s warnings: move it with `pcbNameAt` or move the part). |
|
|
151
195
|
| `unplaced` | warning | Parts still on automatic placement. |
|
|
152
196
|
| `unrouted` | warning | Connections are not routed yet. With pours it also says how many more connections the pours make (those need no track), the same number `autoroute` leaves out of its total. |
|
|
197
|
+
| `pair-skew` | warning | The two nets of a pair differ in length by more than `maxSkew`. |
|
|
198
|
+
| `pair-apart` | warning | Less of a pair's length than `minCoupled` (80 %) runs within twice its gap of the other on one layer. |
|
|
199
|
+
| `pair-gap` | warning | Where a pair runs side by side, its gap is off the class's `gap`: how long and from where. |
|
|
200
|
+
| `pair-vias` | warning | The two nets of a pair have a different number of vias. |
|
|
201
|
+
| `net-length` | warning | A net is longer than its class's `maxLength`. |
|
|
202
|
+
| `match-spread` | warning | The nets of a `matchGroup` differ in length by more than `maxSpread`. |
|
|
203
|
+
| `impedance-width` | warning | A track of an impedance or pair class is wider than its class's width (narrower is `track-width`). |
|
|
153
204
|
| `unchecked` | warning | A check could not run: an unknown pad shape, no usable board outline, a part with no position, or a duplicate violation id. |
|
|
154
205
|
|
|
155
206
|
Rules the checks follow:
|
|
@@ -59,24 +59,34 @@ copperflow makes the pads itself from these `footprint` strings (case does not m
|
|
|
59
59
|
|
|
60
60
|
| Family | Strings |
|
|
61
61
|
|---|---|
|
|
62
|
-
| Chip resistors, capacitors, LEDs | `0201`, `0402`, `0603`, `0805`, `1206`, `1210`, `1812`, `2010`, `2512` |
|
|
63
|
-
|
|
|
64
|
-
|
|
|
65
|
-
|
|
|
66
|
-
|
|
|
62
|
+
| Chip resistors, capacitors, LEDs | `01005`, `0201`, `0402`, `0603`, `0805`, `1206`, `1210`, `1812`, `2010`, `2220`, `2512` |
|
|
63
|
+
| Resistor arrays | `array4x0603`, `array4x0402`, `array2x0402` |
|
|
64
|
+
| Diodes | `sod123`, `sod123f`, `sod323`, `sod523`, `sod923`, `sod128`, `sma`, `smb`, `smc` (also `do214ac`, `do214aa`, `do214ab`); MELF `minimelf` (`sod80`, `do213aa`), `melf` (`do213ab`) |
|
|
65
|
+
| SOT-23 | `sot23`, `sot23_5`, `sot23_6`, `sot23_8`, `sot143` |
|
|
66
|
+
| Small SOT | `sot323` (`sc70`), `sot353` (`sc70_5`), `sot363` (`sc70_6`), `sot523`, `sot563`, `sot723` |
|
|
67
|
+
| Power SOT, DPAK | `sot223`, `sot89`, `dpak` (`to252`), `d2pak` (`to263`), `d2pak_5`, `d2pak_7` (tab is pad 2) |
|
|
68
|
+
| Tantalum (moulded) | `tant_a` … `tant_e`, or `tant3216`, `tant3528`, `tant6032`, `tant7343` (pad 1 is +) |
|
|
69
|
+
| SOIC, SOP, SSOP, TSSOP, MSOP, QSOP | `soic<N>` (3.9 mm body, N even 8–16), `soic<N>w` (7.5 mm body: 16, 18, 20, 24, 28), `sop<N>` (5.3 mm, 1.27 mm pitch, N even 8–16), `ssop<N>` (5.3 mm, 0.65 mm pitch: 14, 16, 20, 24, 28), `tssop<N>` (4.4 mm, 0.65 mm pitch, N even 8–28), `msop8`, `msop10`, `qsop<N>` (N 16, 20, 24, 28) |
|
|
70
|
+
| Exposed pad on those | `soic8_ep<w>x<h>`, `msop8_ep…`, `msop10_ep…`, `tssop<N>_ep…`: the size is required (bare `_ep` is refused); the pad is number N+1 |
|
|
67
71
|
| QFP | `qfp32`, `qfp48`, `qfp64`, `qfp100`; by body and pitch `qfp<N>_<b>x<b>_p<pitch>` such as `lqfp64_10x10_p0.5` (`lqfp`, `tqfp` are the same) |
|
|
68
72
|
| QFN | `qfn16`, `qfn32`, `qfn48`, and with the exposed pad `qfn16_ep`, `qfn32_ep`, `qfn48_ep`; by body and pitch `qfn<N>_<b>x<b>_p<pitch>` with an optional `_ep<size>` or `_ep<w>x<h>`, such as `qfn32_5x5_p0.5_ep3.1` |
|
|
69
73
|
| DFN | `dfn<N>_<across>x<along>_p<pitch>`, `_ep` as for QFN, such as `dfn8_3x3_p0.65_ep1.6x2.4` |
|
|
70
74
|
| BGA | `bga<N>_<x>x<y>_p<pitch>`, a full grid, optional `_rows<R>x<C>`, such as `bga256_17x17_p1` |
|
|
75
|
+
| PLCC, SMD DIP | `plcc<N>` (N 20, 28, 32, 44, 52, 68, 84), `smdip<N>` (N 4, 6, 8, 16) |
|
|
71
76
|
| DIP (through-hole) | `dip<N>`, rows 7.62 mm apart unless `_w<mm>`, such as `dip28_w15.24` |
|
|
72
|
-
| TO packages (through-hole) | `to220`, `to92` |
|
|
73
|
-
|
|
|
77
|
+
| TO packages (through-hole) | `to220`, `to220_2`, `to220_5`, `to247`, `to126`, `to92` (`to92_inline`, straight 1.27 mm leads, is refused: no lands meet the rules; use `to92`) |
|
|
78
|
+
| Axial (through-hole) | `axial<body length>x<lead spacing>` with optional `_d<body diameter>`, such as `axial6.3x10.16_d2.5`; diodes `do35`, `do41`, `do15`, `do201ad` (pad 2 cathode) |
|
|
79
|
+
| LEDs | `led3mm`, `led5mm` (through-hole); `led3528`, `led5050`, `led5050_6` (surface mount) |
|
|
80
|
+
| Crystals | `hc49`, `hc49s` (through-hole); `hc49smd`, `xtal2016`, `xtal2520`, `xtal3225`, `xtal5032`, `xtal5032_2`, `xtal3215`, `xtal7050` (surface mount) |
|
|
74
81
|
| Radial electrolytics | `radial<can>x<lead spacing>`, such as `radial6.3x2.5` |
|
|
82
|
+
| SMD electrolytic cans | `smdcan4x5.4`, `smdcan5x5.4`, `smdcan6.3x5.4`, `smdcan6.3x7.7`, `smdcan8x6.5`, `smdcan8x10.2`, `smdcan10x10.2` |
|
|
75
83
|
| Pin rows (through-hole) | `pinrow<N>`: N pins at 2.54 mm, or at a pitch `_p<pitch>` larger than the 1.7 mm pad, such as `pinrow4_p2mm`; two rows `pinrow2x<N>` (odd pins on top) |
|
|
84
|
+
| Uno parts | `resonator3213`; `usb_b`, `usb_c16` (shell legs share the last pad number); `dcjack` (also `dcjack2.1`, `dcjack2.5`); `tact6x6`, `tact6x6_smd` (1–2 and 3–4 joined); `ind4x4`, `ind5x5`, `ind6x6`, `ind8x8`, `ind10x10`, `ind12x12` |
|
|
85
|
+
| Sockets, screw terminals | `socket<N>`, `socket2x<N>` (as the pin rows); `screw<N>` (N 2–24), optional `_p3.5`, `_p3.81`, `_p5`, `_p5.08` |
|
|
76
86
|
|
|
77
87
|
`docs/footprints.md` in the copperflow repository draws each family and says how sure its numbers
|
|
78
88
|
are. A parameter such as `_p1.27mm` on a cited package (`soic8_p1.27mm`) is accepted only when it
|
|
79
|
-
matches the package. Any other string, such as `
|
|
89
|
+
matches the package. Any other string, such as `sot666` or `to3`, gives the error
|
|
80
90
|
`copperflow cannot make footprint "<string>": known families are …`, naming the nearest valid
|
|
81
91
|
strings first when it looks like a known family (`soic18`: `soic14, soic16, soic18w`).
|
|
82
92
|
For a package no family fits, a library part carries its own `footprint.yaml` (see
|
|
@@ -46,6 +46,32 @@ instance, shows the card.
|
|
|
46
46
|
4. Say to the person which modules you used and whether each is verified. A module that is NOT
|
|
47
47
|
verified is a draft: check it as you would your own block.
|
|
48
48
|
|
|
49
|
+
## Checking a block's voltages: simulate and cases
|
|
50
|
+
|
|
51
|
+
Run `simulate` before a block is built, when its job is a voltage or a current: a divider, a clamp,
|
|
52
|
+
a switch that must be fully on, a resistor that must not burn. `simulate { file, set: { V12: 12,
|
|
53
|
+
GND: 0, CTRL: 3.3 }, sheet?, closed?, coil? }` gives each net's voltage, each source's current and
|
|
54
|
+
the power drawn, then the parts beyond a limit (a resistor's power against its package, a diode's
|
|
55
|
+
current against `ifmax`, a MOSFET neither off nor fully on, a capacitor over `voltageRating`), then
|
|
56
|
+
each part. A net set to `"open"` floats; `closed` names switches, `coil` relays that are energised.
|
|
57
|
+
|
|
58
|
+
What it is: a DC operating point from ideal sources and simple models (resistors, diodes and LEDs
|
|
59
|
+
fitted to `vf` at `vfAt`, zeners to `vz` at `vzAt` and `zz`, MOSFETs to `vth` and `rdson` at
|
|
60
|
+
`rdsonAt`, transistors to `hfe` and `vbe` at `vbeAt`, relay coils). What it does not know: time,
|
|
61
|
+
frequency, temperature, tolerance; chips are not modelled, their pins draw nothing unless the part's
|
|
62
|
+
`model` gives `loads`. A diode or LED with no figures uses generic ones marked assumed; a transistor
|
|
63
|
+
or MOSFET with none is refused. A library part carries `model:` in part.yaml with the datasheet page
|
|
64
|
+
of each figure; each figure is an item of its verification checklist.
|
|
65
|
+
|
|
66
|
+
A sheet's card can carry `cases` (write them with `describe_sheet`): `[{ name, set, closed?, coil?,
|
|
67
|
+
expect: { OUT: [3.2, 3.6], "K1.coil.i": [0.027, 0.033] } }]`. A figure is a net's voltage, or a
|
|
68
|
+
part's `.v`, `.i`, `.p` (`Q1.vgs` for a MOSFET, `K1.coil.i` for a relay). `simulate { file, sheet
|
|
69
|
+
}` with no `set` runs them, one line each; `module_info` shows the last result. A case that passes
|
|
70
|
+
shows the block's DC levels with the models given, not that the module is verified. If a case shows
|
|
71
|
+
a block not doing what its card says, say so to the person; do not change the case or the figures
|
|
72
|
+
until it passes. `copperflow spice <file> --out x.cir` writes the same circuit for another
|
|
73
|
+
simulator.
|
|
74
|
+
|
|
49
75
|
## After the person approved a board: save_module
|
|
50
76
|
|
|
51
77
|
`save_module { file: "Input.sheet.tsx", name, replace }` copies a sheet and its library parts to
|
|
@@ -17,7 +17,8 @@ Passive parts (resistors, capacitors, LEDs, headers) are built in and need no en
|
|
|
17
17
|
- `package`: a footprint string for the package, such as `sot23_5`, `soic8`,
|
|
18
18
|
`qfn32_p0.5mm` or `tssop20`; copperflow makes the pads from it. The strings it knows are
|
|
19
19
|
listed in [editable-subset.md](editable-subset.md). Use a footprint string whenever a family
|
|
20
|
-
fits the package.
|
|
20
|
+
fits the package. To find the string for a package by its name, call `guide` with the topic
|
|
21
|
+
`packages` (add search words: `packages sot 5`).
|
|
21
22
|
When none fits, set `package` to `{ "file": "footprint.yaml" }` and pass `footprint_file`: transcribe
|
|
22
23
|
every pad (number, shape, x, y, width, height, and a drill for through-hole pads) from the
|
|
23
24
|
datasheet's recommended land pattern, name the page you took it from, and never estimate a
|
|
@@ -78,6 +78,15 @@ without a footprint, silkscreen over pads, parts without an LCSC number (JLCPCB
|
|
|
78
78
|
not match them). A design with errors is refused and nothing is written. It writes Gerbers,
|
|
79
79
|
plated and non-plated drills, pick-and-place and the BOM into `<name>-fab/` and
|
|
80
80
|
`<name>-fab.zip`. `bom` and `export_package` read the built design, so parts made in loops count.
|
|
81
|
+
`bom` ends with the order report (ready for bare boards, ready for assembly, each line without a
|
|
82
|
+
supplier part number and how to add one) and `export_fabrication` with its two verdicts;
|
|
83
|
+
`export_package` also writes `pins.md` and a `<part>_pins.h` per library chip, the pin map for the firmware.
|
|
84
|
+
|
|
85
|
+
`export_model` `{ file, format, out?, look? }` writes one 3D model file beside the circuit, for a
|
|
86
|
+
design that still has errors too: `format: "step"` is the STEP file for mechanical CAD (the board
|
|
87
|
+
and each part as a box), `format: "glb"` a GLB file a 3D viewer turns (the board as made, in the
|
|
88
|
+
`look` asked for, and the parts as simple shapes, not their real models). Its answer names the parts
|
|
89
|
+
whose height is typical or assumed; pass that on when the person will fit an enclosure around it.
|
|
81
90
|
|
|
82
91
|
Export only a clean board: `check_circuit` with 0 errors and no `unrouted` warning. With
|
|
83
92
|
connections still unrouted the files are written with a warning, but the board is not finished
|