copilotkit 4.20.0 → 4.21.0

package/onboarding/prompts/framework/strands-typescript.md

@@ -30,7 +30,7 @@ Record the selected framework, vendor, model, required credential variable names
 URLs, and the context documentation gap.
 
 If the pages support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/plan`.
 
 If the documentation does not support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/angular.md

@@ -5,7 +5,7 @@ Preserve an existing Angular frontend. Use the selected page for a new frontend.
 Use the starter shortcut only if all these facts are true: the target directory holds no
 project, its name is a valid `init` project name, and the selected framework is ADK.
 If all three facts are true, record Angular as the selected frontend. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read starter/clone` before you fetch documentation.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read starter/clone` before you fetch documentation.
 
 ## Documentation
 
@@ -63,7 +63,7 @@ you create or build an Angular project. If the installed version is lower, selec
 supported version first and use it for every later command in this project.
 
 If the pages support the selection, record Angular and these URLs. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/finalize-plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/finalize-plan`.
 
 If the documentation does not support the selection, or the two version lines do not fit
-together, run `npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+together, run `npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/nextjs.md

@@ -15,7 +15,7 @@ These TypeScript options have starters: Claude Agent SDK TypeScript, LangGraph T
 Mastra, and Strands Agents TypeScript. The .NET option is Microsoft Agent Framework .NET.
 
 If all shortcut conditions are true, record Next.js as the selected frontend. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read starter/clone` before you fetch documentation.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read starter/clone` before you fetch documentation.
 
 ## Documentation
 
@@ -40,7 +40,7 @@ developer's work.
 - Do not claim, revert, or delete these files. Name them in the report as Next.js output.
 
 If the page supports the selection, record Next.js and this URL. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/finalize-plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/finalize-plan`.
 
 If the documentation does not support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/plan.md

@@ -37,15 +37,15 @@ CopilotKit web apps. Then recommend the one the developer names, and say what ea
 
 Use exactly one matching internal route:
 
-1. React SPA: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/react-spa`
-2. Next.js: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/nextjs`
-3. Angular: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/angular`
-4. Vue 3: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/vue`
-5. React Native: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read frontend/react-native`
-6. Slack or Microsoft Teams: `npx --prefer-offline --yes copilotkit@4.20.0 onboard read feature/channels/start`
+1. React SPA: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/react-spa`
+2. Next.js: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/nextjs`
+3. Angular: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/angular`
+4. Vue 3: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/vue`
+5. React Native: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read frontend/react-native`
+6. Slack or Microsoft Teams: `npx --prefer-offline --yes copilotkit@4.21.0 onboard read feature/channels/start`
 
 If they chose Slack or Microsoft Teams, tell that node which one they chose so it
 does not ask again.
 
 If no listed frontend fits, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/react-native.md

@@ -18,7 +18,7 @@ documents `useRenderTool`, which is React Native's own hook for drawing a tool t
 already has. That is a different job and needs a tool in the agent.
 
 If the pages support the selection, record React Native and these URLs. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/finalize-plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/finalize-plan`.
 
 If the documentation does not support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/react-spa.md

@@ -14,7 +14,7 @@ not move the agent into it.
 - https://docs.copilotkit.ai/react-spa.md
 
 If the page supports the selection, record React SPA and this URL. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/finalize-plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/finalize-plan`.
 
 If the documentation does not support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/frontend/vue.md

@@ -19,7 +19,7 @@ page above. Vue has its own `useComponent`, which is not the React package. Take
 that reference page rather than from a Vue generative-UI guide, which is not published.
 
 If the pages support the selection, record Vue 3 and these URLs. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/finalize-plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/finalize-plan`.
 
 If the documentation does not support the selection, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/implementation/build-and-validate.md

@@ -12,7 +12,7 @@ acted on. Send one short report before you stop. The friction command follows th
 setting the developer already chose, so it needs no separate question.
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard friction --phase stop --category <slug> --message "<sentences>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard friction --phase stop --category <slug> --message "<sentences>"
 ```
 
 `--message` takes one or two sentences: the step you stopped at and what stopped it.
@@ -67,7 +67,7 @@ Approving the plan is the developer agreeing to every path it listed under
 app directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>"
 ```
 
 Consent has to be on the record before the file moves, so a call made after the change is
@@ -99,7 +99,7 @@ No implementation step has run yet, so the change is theirs rather than this run
 consent over it by adding one flag:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>" --with-prior-change
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>" --with-prior-change
 ```
 
 The flag records their change as drift beside the consent, so the closing report names both
@@ -119,7 +119,7 @@ audit below describes, rather than use this section.
 Run the audit from the target app directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard audit
+npx --prefer-offline --yes copilotkit@4.21.0 onboard audit
 ```
 
 It compares every protected path with the digest the CLI captured for it. Its result starts
@@ -154,14 +154,14 @@ A path that no Files changed section names changed outside the run, and it is th
 developer's own file. Accept it by name:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --accept-external --path <path>
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --accept-external --path <path>
 ```
 
 A changed env file is its own case. This run asked the developer to place a credential
 there, so it takes the credential route rather than this one:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --accept-credential --path <path>
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --accept-credential --path <path>
 ```
 
 That route proves no recorded credential was lost, instead of taking the run's word that it
@@ -180,7 +180,7 @@ neither does a one-line fix. Never repair, reset, or revert it. Ask the develope
 the change, and record the answer they give:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"
 ```
 
 Use it only for an answer a developer actually gave. It records the consent as taken
@@ -215,7 +215,7 @@ directory. The developer approved the id before it was made, so this is the firs
 which it can be created:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 learning containers create --id <id> --name <name> --json
+npx --prefer-offline --yes copilotkit@4.21.0 learning containers create --id <id> --name <name> --json
 ```
 
 Pass the id the plan names. Take the name from the selected project's own display name, so
@@ -232,7 +232,7 @@ plan names no container, skip this section.
 ## Implement the plan
 
 Spawn one implementation subagent. Tell it to run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read subagent/implement-and-validate` first and follow
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read subagent/implement-and-validate` first and follow
 the prompt it returns. If that read fails because the subagent cannot use the shell, stop that
 subagent. Run the same command yourself, then spawn a fresh subagent with the returned prompt
 and the same handoff. Give it the plan, selected framework, frontend, model, exact target app
@@ -259,7 +259,7 @@ names the same way as above, against the Files changed section that subagent jus
 returned. Continue to proof only when that audit passes.
 
 Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read proof/round-trip`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read proof/round-trip`.
 
 ## Repair rules
 
@@ -285,9 +285,9 @@ the same command still fails after three repair attempts, a result starts with
 declined a file the plan does not name, or the run cannot ask them about it. A defect in a
 package this run installed is not a stack CopilotKit does not serve, a command this run cannot get to pass is not one either, and a blocked audit
 proved nothing about the stack. In those cases run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`.
 
 A plan with no path to follow takes the unsupported ending: the fix requires changing the
 developer's existing agent or frontend, or the documentation does not support the plan. In
 those cases run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read unsupported/no-validated-path`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/proof/complete.md

@@ -24,7 +24,7 @@ friction commands follow the telemetry setting the developer already chose, so t
 separate question.
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard friction --category <slug> --cost-seconds <seconds> --message "<sentences>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard friction --category <slug> --cost-seconds <seconds> --message "<sentences>"
 ```
 
 Put one or two sentences in `--message`. Pick one category from docs-missing, docs-wrong,
@@ -46,7 +46,7 @@ Pass the surface-check outcome the proof subagent returned, not the one you want
 web frontend, pass `--visual-check` and the URL the browser opened, unchanged:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard complete --visual-check <outcome> \
+npx --prefer-offline --yes copilotkit@4.21.0 onboard complete --visual-check <outcome> \
   --frontend-url <the url you opened>
 ```
 
@@ -74,7 +74,7 @@ this graph opens.
 nothing drove the frontend:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard complete --visual-check failed --blocked-by browser-control-unresponsive
+npx --prefer-offline --yes copilotkit@4.21.0 onboard complete --visual-check failed --blocked-by browser-control-unresponsive
 ```
 
 ## Write the handoff

package/onboarding/prompts/proof/oss-baseline.md

@@ -1,7 +1,7 @@
 # Prove the existing OSS baseline
 
 Do not prove the baseline yourself. Spawn one proof subagent. Tell it to run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read subagent/prove-oss-baseline` first and follow the
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read subagent/prove-oss-baseline` first and follow the
 prompt it returns. If that read fails because the subagent cannot use the shell, stop that
 subagent. Run the same command yourself, then spawn a fresh subagent with the returned prompt
 and the same handoff. Give it the repository findings and exact CLI package spec.
@@ -17,7 +17,7 @@ Wait for the subagent to finish.
 Record what that proof returned before you route on it:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard proof --step oss-baseline --outcome <passed|failed|skipped> [--predicate <1-6>]
+npx --prefer-offline --yes copilotkit@4.21.0 onboard proof --step oss-baseline --outcome <passed|failed|skipped> [--predicate <1-6>]
 ```
 
 Report the gate whatever it returned. Use the list below. A proof that never ran is `skipped`, not failed. The command prints one line and sends
@@ -39,12 +39,12 @@ Do not change project files before this proof ends. Starting existing developmen
 processes and their ignored runtime files is allowed.
 
 If the subagent proves the `both-oss` predicate, keep its evidence with the plan and run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read conversion/plan`. That project already works.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read conversion/plan`. That project already works.
 What it needs is the conversion, not a build.
 
 If the proof does not establish the baseline, record the starting state
 `both-copilotkit-unproved` and run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/plan`. This prompt is served
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/plan`. This prompt is served
 whenever a project looks like an OSS integration, so a baseline that did not prove is an
 ordinary starting state rather than a failure. Keep the failing predicate with the plan.
 
@@ -58,5 +58,5 @@ and the plan preserves it rather than repeating it.
 
 If it cannot identify the running process safely, exposes a secret, or finds a baseline
 failure that cannot be classified, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`. None of those mean the
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`. None of those mean the
 project is unsupported: they mean this run did not establish what it needed to.

package/onboarding/prompts/proof/round-trip.md

@@ -1,7 +1,7 @@
 # Prove the user journey
 
 Do not do the proof work yourself. Spawn one proof subagent. Tell it to run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read subagent/prove-round-trip` first and follow the
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read subagent/prove-round-trip` first and follow the
 prompt it returns. If that read fails because the subagent cannot use the shell, stop that
 subagent. Run the same command yourself, then spawn a fresh subagent with the returned prompt
 and the same handoff. Give it the selected framework, frontend, model, approved plan, selected
@@ -35,7 +35,7 @@ pass the time.
 Record what that proof returned before you route on it:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard proof --step round-trip --outcome <passed|failed|skipped>
+npx --prefer-offline --yes copilotkit@4.21.0 onboard proof --step round-trip --outcome <passed|failed|skipped>
 ```
 
 Report the gate whatever it returned. A proof that never ran is `skipped`, not failed. A
@@ -44,7 +44,7 @@ to record it as `skipped`. The command prints one line and sends nothing else. W
 record each attempt as it ends.
 
 For every protected-path audit in this prompt, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard audit` from the target app directory. If its result
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard audit` from the target app directory. If its result
 starts with `Status: blocked`, report the printed reason and use the route-out rules below.
 A blocked audit proved nothing changed and is not a preservation failure. If a
 protected-path audit reports a changed path, decide it the way the implementation prompt
@@ -53,7 +53,7 @@ returns none, so a finding with no Files changed section to test against routes
 path one of those sections names is this run's own change and routes out too. Accept a
 path only when a section this run collected covers the step that wrote it and does not
 name it:
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --accept-external --path <path>`. Then run
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --accept-external --path <path>`. Then run
 the audit again and name the path in the closing summary. Never repair, reset, or revert a
 protected path.
 
@@ -61,12 +61,12 @@ That holds for a repair cycle too. When the fix for a failing check lands on a p
 path, the path is still the developer's, however right the diagnosis is and however small
 the fix. Reading the file never settles who wrote it. Ask the developer to allow the
 change, and record their answer with
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"`,
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"`,
 or route out. Never repair it, and never send it to a repair worker.
 
 If the proof result starts with `Status: passed`, run the protected-path audit. Continue to
 `proof/complete` only if that audit passes. After the audit passes, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read proof/complete`. A performed surface outcome with
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read proof/complete`. A performed surface outcome with
 the full round trip is core success even if a continued-development tool fails. A skipped
 surface outcome still enters `proof/complete`. The CLI records `skipped-cloned-starter` and
 `skipped-no-browser-tool` after a passed round trip as complete, and `skipped-no-device` as
@@ -161,7 +161,7 @@ proof cycles, use the route-out rules below.
 
 Route out only when the failure is not yours to fix, when the same proof still fails after
 three attempts, or when no evidence of the round trip can be produced. In those cases run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`. The stack is supported:
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`. The stack is supported:
 this run did not finish, which is a different ending and a different report. All three are
 about the round trip itself. A round trip that proved is not one of them, whatever failed
 after it.
@@ -172,7 +172,7 @@ friction command follows the telemetry setting the developer already chose, so i
 separate question.
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard friction --phase stop --category <slug> --message "<sentences>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard friction --phase stop --category <slug> --message "<sentences>"
 ```
 
 `--message` takes one or two sentences: the step you stopped at and what stopped it.

package/onboarding/prompts/research/gather.md

@@ -44,7 +44,7 @@ Before you end your turn to wait for the developer where the prompt states no de
 report the pause:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard checkpoint --phase awaiting-developer
+npx --prefer-offline --yes copilotkit@4.21.0 onboard checkpoint --phase awaiting-developer
 ```
 
 When the answer or the result arrives, continue from the step that paused. Do not read an
@@ -64,7 +64,7 @@ Both research subagents failing means this harness has no working subagent at al
 is worth recording once:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard checkpoint --phase delegation-unavailable
+npx --prefer-offline --yes copilotkit@4.21.0 onboard checkpoint --phase delegation-unavailable
 ```
 
 Then say once, in your own words, that this environment has no working subagents, so you
@@ -77,7 +77,7 @@ Before you ask the developer any setup question, finish every read-only investig
 preflight check in this section.
 
 Prepare two research assignments. Give each research subagent one assignment. Tell it to run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read subagent/inspect-repository` first and follow the
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read subagent/inspect-repository` first and follow the
 prompt it returns. If that read fails because the subagent cannot use the shell, stop that
 subagent. Run the same command yourself, then spawn a fresh subagent with the returned prompt
 and the same handoff. Require only its assigned packet.
@@ -91,8 +91,8 @@ Start both research subagents in parallel:
 The research is under way. Continue to the surface-control preflight while it runs:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard read research/preflight
+npx --prefer-offline --yes copilotkit@4.21.0 onboard read research/preflight
 ```
 
 If inspection stops onboarding, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`.

package/onboarding/prompts/research/merge.md

@@ -46,7 +46,7 @@ worker a focused directory check. Continue only when both workers return the sam
 app directory. Both results must start with `Status: passed`. Otherwise, use the stop route.
 
 When both research results are merged, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read research/route`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read research/route`.
 
 If inspection stops onboarding, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`.

package/onboarding/prompts/research/preflight.md

@@ -27,8 +27,8 @@ Where the device probe found no booted device, that is the whole finding.
 Then merge the research:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard read research/merge
+npx --prefer-offline --yes copilotkit@4.21.0 onboard read research/merge
 ```
 
 If inspection stops onboarding, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`.

package/onboarding/prompts/research/route.md

@@ -9,7 +9,7 @@ sends the run down one path.
 Before you route on, run this from the target app directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard protect
+npx --prefer-offline --yes copilotkit@4.21.0 onboard protect
 ```
 
 It reads the working tree itself, records every changed or untracked path with a digest,
@@ -42,7 +42,7 @@ On either, run this before you read the three findings below, and without asking
 purpose question:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard read feature/channels/start
+npx --prefer-offline --yes copilotkit@4.21.0 onboard read feature/channels/start
 ```
 
 Name the provider to that node so it does not ask again. A Slack page names Slack. A Teams
@@ -97,7 +97,7 @@ settle these three from your own reading of the project. Each one comes from the
 packets or it is not proved.
 
 If all three are proved, prove the live starting state before any project file changes. Run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read proof/oss-baseline`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read proof/oss-baseline`.
 
 Route there before you ask the developer anything else. The questions after this prompt
 select a framework and a frontend that the findings already name, so a developer who
@@ -110,7 +110,7 @@ developer nor the repository findings prove what the project is for, ask one gui
 question about the user outcome. This asks what the developer wants to build before you
 select a framework. Give two or three short examples. Record the answer and give it to
 each later subagent. Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read credentials/plan`.
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read credentials/plan`.
 
 Do not ask that question on the route above. A project carrying all three states its
 purpose in the application it already serves.
@@ -124,5 +124,5 @@ A purpose question here names a domain before that choice.
 Take the same read named above without asking.
 
 If authentication, inspection, or the baseline capture stops onboarding, run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`. None of them says anything
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`. None of them says anything
 about whether this project's stack is supported, which is not yet known at this point.

package/onboarding/prompts/starter/clone.md

@@ -55,7 +55,7 @@ the derived name.
 Only if the developer asks for an existing project, or asks to see the projects they have,
 read the choices:
 
-`npx --prefer-offline --yes copilotkit@4.20.0 project list --json`
+`npx --prefer-offline --yes copilotkit@4.21.0 project list --json`
 
 Then ask which one to use. Do not order the projects by creation time. If the developer
 already gave this answer, do not ask again. Do not read a secret value. Do not show or
@@ -82,7 +82,7 @@ Run the command from the parent directory. Do not inspect another entry in the p
 directory. Replace each placeholder with the recorded value. Do not run a placeholder as
 a shell argument. If the directory name holds a space, put it in double quotes.
 
-`npx --prefer-offline --yes copilotkit@4.20.0 init --name <directory-name> --framework <framework-id> --channel none --no-banner --no-key-prompt --create <name> --install`
+`npx --prefer-offline --yes copilotkit@4.21.0 init --name <directory-name> --framework <framework-id> --channel none --no-banner --no-key-prompt --create <name> --install`
 
 `--name` is always the target directory name derived above, because `init` creates the
 app at `<parent>/<name>`. Any other value puts the app in a new folder beside the target,
@@ -143,7 +143,7 @@ When you ask, name each variable and the file it goes in, and say that the run c
 when they reply or resume this session. Then report the pause and end your turn:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard checkpoint --phase awaiting-model-credential
+npx --prefer-offline --yes copilotkit@4.21.0 onboard checkpoint --phase awaiting-model-credential
 ```
 
 This is a pause, not a stop. Do not send a stop report, and do not take a stop route.
@@ -154,10 +154,10 @@ call.
 
 If no credential is missing, report no pause and continue.
 
-Then run `npx --prefer-offline --yes copilotkit@4.20.0 onboard read proof/round-trip`.
+Then run `npx --prefer-offline --yes copilotkit@4.21.0 onboard read proof/round-trip`.
 
 If the command fails, report its exact error and do not claim that the starter is ready.
 Then run
-`npx --prefer-offline --yes copilotkit@4.20.0 onboard read stopped/run-failed`. The starter is one this
+`npx --prefer-offline --yes copilotkit@4.21.0 onboard read stopped/run-failed`. The starter is one this
 graph ships and the stack was chosen from its own supported list, so a command that
 returned an error is a run that broke, not a setup this release does not support.

package/onboarding/prompts/stopped/run-failed.md

@@ -41,7 +41,7 @@ put to them, stop here and send the report below.
 If they approve it, make that one fix and nothing else. Then come back into this run:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard resume --message "<approval>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard resume --message "<approval>"
 ```
 
 Put the developer's approval in `--message`, in one or two sentences: the fix they
@@ -64,7 +64,7 @@ Send one short report. The friction command follows the telemetry setting the de
 already chose, so it needs no separate question.
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard friction --phase stop --category <slug> --message "<sentences>"
+npx --prefer-offline --yes copilotkit@4.21.0 onboard friction --phase stop --category <slug> --message "<sentences>"
 ```
 
 `--message` takes one or two sentences: the step you stopped at and what stopped

package/onboarding/prompts/subagent/create-plan.md

@@ -183,7 +183,7 @@ here is work the developer did not ask for.
 Plan the threads drawer itself: add it from the selected drawer page, where this frontend
 does not already render one. Where this journey's frontend framework ships no threads
 drawer -- React Native --, plan that the thread is proved by
-`npx --prefer-offline --yes copilotkit@4.20.0 verify --round-trip`, which needs no browser. Do not plan a
+`npx --prefer-offline --yes copilotkit@4.21.0 verify --round-trip`, which needs no browser. Do not plan a
 step that opens the managed Intelligence dashboard.
 
 ## Name the files the run writes itself

package/onboarding/prompts/subagent/inspect-repository.md

@@ -7,7 +7,7 @@ Work only on the packet you were assigned. Inspect the repository without changi
 Run this first, from the target project directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard inspect --json
+npx --prefer-offline --yes copilotkit@4.21.0 onboard inspect --json
 ```
 
 It answers the deterministic half of both packets exactly, from the same code

package/onboarding/prompts/subagent/prove-oss-baseline.md

@@ -32,7 +32,7 @@ Prove the live runtime in this order:
 4. Confirm from project files that the runtime constructor passes a `runner` option rather
    than an `intelligence` option. A package, import, project file, or key is not use proof.
 5. Run
-   `npx --prefer-offline --yes copilotkit@4.20.0 verify --expect-runtime oss --round-trip --agent <expected-agent-id> --json`,
+   `npx --prefer-offline --yes copilotkit@4.21.0 verify --expect-runtime oss --round-trip --agent <expected-agent-id> --json`,
    with the runtime URL or auth header options that this project needs. Require exit zero
    and the JSON `ok` field to be `true`.
 6. Drive one real request through the existing frontend, CopilotKit runtime, and expected

package/onboarding/prompts/subagent/prove-round-trip.md

@@ -135,7 +135,7 @@ is taken moves to the next free one without asking. Where the runtime runs as a
 its own, this is the runtime's port, not the frontend's.
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard runtime-url --url <runtime-url>
+npx --prefer-offline --yes copilotkit@4.21.0 onboard runtime-url --url <runtime-url>
 ```
 
 `<runtime-url>` is the Step 1 runtime URL with its port replaced by the port that server
@@ -185,7 +185,7 @@ IPv6 only, so an IPv4 literal fails against the correct port.
 ## Step 4 -- Check the wiring
 
 With both running, check the wiring in one command before you open a browser:
-`npx --prefer-offline --yes copilotkit@4.20.0 verify --json`. It reads the port from this project, so a
+`npx --prefer-offline --yes copilotkit@4.21.0 verify --json`. It reads the port from this project, so a
 non-default port needs no flag. The payload reports `runtimeUrl` and `runtimeUrlSource`. A
 `runtimeUrlSource` of `default` means nothing in the project named a port, so the Step 2
 record is missing. Run the Step 2 `onboard runtime-url` command, then run `verify` again. Read the individual checks rather than
@@ -223,7 +223,7 @@ named no port the CLI can read: keep step 2's URL, and rewrite its host as `loca
 before you use it.
 
 Then run the command once more with the URL you are about to open:
-`npx --prefer-offline --yes copilotkit@4.20.0 verify --frontend-url <that url> --json`. The
+`npx --prefer-offline --yes copilotkit@4.21.0 verify --frontend-url <that url> --json`. The
 `frontend_assets_served` check asks that server for its page and for one of the page's own
 assets, on that exact host. A `fail` there means the dev server refuses its own static
 assets on the host you were about to use, and the check names the URL to use instead. This
@@ -231,7 +231,7 @@ is the cheapest step that can save the most expensive one, so run it before the
 
 ## Step 5 -- Prove that the agent runs
 
-Run `npx --prefer-offline --yes copilotkit@4.20.0 verify --round-trip --json`. It sends one request through
+Run `npx --prefer-offline --yes copilotkit@4.21.0 verify --round-trip --json`. It sends one request through
 the runtime and reads the answer back from the thread, so it separates an agent that is
 configured from an agent that works. Use `--agent <id>` when the runtime declares more
 than one. If it reports `user-not-identified`, this project's `identifyUser` reads a
@@ -256,7 +256,7 @@ Where this run settled a Learning Container, add the flag to the call above rath
 running a second round trip:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 verify --round-trip --expect-learning-container <container id> --json
+npx --prefer-offline --yes copilotkit@4.21.0 verify --round-trip --expect-learning-container <container id> --json
 ```
 
 The check reads the thread that this run created, so a second round trip proves a second
@@ -290,7 +290,7 @@ the credential was written holds an empty key while the file beside it carries t
 one. Run this from the target app directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard env-staleness
+npx --prefer-offline --yes copilotkit@4.21.0 onboard env-staleness
 ```
 
 A `stale` line names the env file and how long after launch it was written. Report that,
@@ -306,7 +306,7 @@ environment on to every process it starts, so a provider base URL exported for t
 reaches the dev servers. Run this from the target app directory:
 
 ```text
-npx --prefer-offline --yes copilotkit@4.20.0 onboard inspect --json
+npx --prefer-offline --yes copilotkit@4.21.0 onboard inspect --json
 ```
 
 Read `providerEndpoints` for the app directory. An entry with a `null` `source` came from
@@ -396,7 +396,7 @@ For a recorded `both-oss` starting state, this step has no component to render.
 same request the baseline recorded, require the same kind of user-visible result the
 baseline produced, and require that the thread for that request is listed in the drawer.
 Where this journey's frontend framework ships no threads drawer -- React Native --, prove
-that thread with `npx --prefer-offline --yes copilotkit@4.20.0 verify --round-trip`, which reads the
+that thread with `npx --prefer-offline --yes copilotkit@4.21.0 verify --round-trip`, which reads the
 answer back off the thread and needs no browser. Record which of the two you proved.
 
 Use the surface control the main coding agent recorded for your environment. That finding
@@ -424,7 +424,7 @@ limit can be ten minutes. You cannot interrupt a call while it runs, so the limi
 what you do after one. If a browser call took longer than 60 seconds to return, the browser
 control is unresponsive. Do not call the browser again in this attempt. A second call to a
 hung tool waits as long as the first one did. Run
-`npx --prefer-offline --yes copilotkit@4.20.0 verify --frontend-url <the url step 4 resolved> --json` once,
+`npx --prefer-offline --yes copilotkit@4.21.0 verify --frontend-url <the url step 4 resolved> --json` once,
 and record the `frontend_assets_served` result. Report the outcome `failed` with the cause
 `browser-control-unresponsive`. The application is not at fault on this evidence: every
 step before the browser proved the runtime without one, and no repair to the project can
@@ -434,7 +434,7 @@ reach the tool.
    the page to finish loading. Do not retype the host, and do not substitute a URL a tool
    offers you by default. Where the page loads but its styling is missing or the chat
    control is dead, run
-   `npx --prefer-offline --yes copilotkit@4.20.0 verify --frontend-url <the url you opened> --json`
+   `npx --prefer-offline --yes copilotkit@4.21.0 verify --frontend-url <the url you opened> --json`
    before you diagnose anything else. A dev server can serve its page and refuse every
    static chunk behind it, and on screen that is indistinguishable from a broken
    integration. The `frontend_assets_served` check tells the two apart.