copilotkit 4.11.0 → 4.12.0

package/onboarding/index.json

@@ -1,5 +1,5 @@
 {
-  "graphTree": "31372aea9d38d802779516dc556c136faf611b32",
+  "graphTree": "aca3eeff60c7fed03d24e93e166829ff405da63d",
   "intentRoots": {
     "add-a2ui": "feature/a2ui/start",
     "add-chat-suggestions": "feature/chat-suggestions/start",
@@ -106,6 +106,11 @@
       "milestone": "feature",
       "name": "feature/a2ui/start"
     },
+    {
+      "edges": [],
+      "milestone": "feature",
+      "name": "feature/blocked-by-plan"
+    },
     {
       "edges": [
         "feature/stop",
@@ -161,6 +166,7 @@
     },
     {
       "edges": [
+        "feature/blocked-by-plan",
         "feature/stop",
         "feature/learning/proof"
       ],
@@ -177,6 +183,7 @@
     },
     {
       "edges": [
+        "feature/blocked-by-plan",
         "feature/stop",
         "feature/learning/implement"
       ],

package/onboarding/prompts/authenticate/start.md

@@ -5,7 +5,7 @@
 Run this before anything else in this prompt, including the welcome message below:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard identify --coding-agent <coding-agent-slug>
+npx --yes copilotkit@4.12.0 onboard identify --coding-agent <coding-agent-slug>
 ```
 
 Report your own product with one short slug, such as `codex` or `claude-code`.
@@ -34,13 +34,15 @@ id. Keep that id for the whole run. Every later command reports against it, and
 printed once.
 
 Every later command must run from the directory this run started in. A command run
-somewhere else, such as a sibling of that directory, is refused rather than answered,
-because the run it belongs to cannot be found from there. That refusal is a step to take,
-not a stop to report: run
-`npx --yes copilotkit@4.11.0 onboard start --run <onboarding_run_id>` in the directory
-you are now in, which binds it to the same run, then run the refused command again. Do not
-start a run without that id. A run started without it is a second run, and the work already
-done stops counting toward the first.
+somewhere else is refused, because the run it belongs to cannot be found from there. That
+refusal is a step, not a stop to report: run
+`npx --yes copilotkit@4.12.0 onboard start --run <onboarding_run_id>` where you are
+standing, then run the refused command again.
+
+If you no longer hold the id, run `npx --yes copilotkit@4.12.0 onboard start` in the
+directory this run started in, with no `--run` and no `--intent`. It reprints the id of the
+run under way and starts nothing. An id this project does not already hold starts a second
+run, and the work already done stops counting toward the first.
 
 Read only inside the target project directory. Every subagent you spawn inherits that
 limit, including one this graph does not name. Answer a CopilotKit API or configuration
@@ -100,7 +102,7 @@ command without another developer question. Do not ask the developer about telem
 command applies the setting they already have.
 
 ```text
-npx --yes copilotkit@4.11.0 onboard friction --phase stop --category <slug>
+npx --yes copilotkit@4.12.0 onboard friction --phase stop --category <slug>
 ```
 
 Write one or two sentences to standard input: the step you stopped at and what stopped it.
@@ -117,7 +119,7 @@ next: send the report, then stop.
 
 ## Check sign-in
 
-Run `npx --yes copilotkit@4.11.0 login --json` before any project work. This command
+Run `npx --yes copilotkit@4.12.0 login --json` before any project work. This command
 checks the current session. It starts sign-in only as needed. Treat this as a long-lived
 streaming process. Do not wait for the command to exit before you read its standard output.
 
@@ -153,8 +155,8 @@ Do not use `whoami` for this check. It has no JSON output and some failures exit
 zero. Do not put account tokens or credentials in the conversation.
 
 When sign-in is settled, run
-`npx --yes copilotkit@4.11.0 onboard read research/gather`.
+`npx --yes copilotkit@4.12.0 onboard read research/gather`.
 
 If sign-in stops onboarding, run
-`npx --yes copilotkit@4.11.0 onboard read stopped/run-failed`. It says nothing about
+`npx --yes copilotkit@4.12.0 onboard read stopped/run-failed`. It says nothing about
 whether this project's stack is supported, which is not yet known at this point.

package/onboarding/prompts/conversion/plan.md

@@ -100,7 +100,7 @@ of this journey, and a drawer that lists nothing is not a reason to mint one. Li
 tokens stay a self-hosted concern.
 
 Where this journey's frontend framework ships no threads drawer -- React Native --, the
-fifth item is proved by `npx --yes copilotkit@4.11.0 verify --round-trip`, which sends a
+fifth item is proved by `npx --yes copilotkit@4.12.0 verify --round-trip`, which sends a
 real request and reads the answer back off the thread it landed on. The run says which of
 the two it proved. Do not send a run to the managed Intelligence dashboard to prove this.
 An authenticated browser session at a hosted dashboard is the one thing an agent-driven run
@@ -116,7 +116,7 @@ and passed -- so a run scored on either one was scored on the same fact. Every r
 resolves that condition from, while `licenseStatus` is a compatibility projection of it
 for older thread surfaces and outlives them only until those surfaces go.
 
-Then run `npx --yes copilotkit@4.11.0 onboard read credentials/finalize-plan`.
+Then run `npx --yes copilotkit@4.12.0 onboard read credentials/finalize-plan`.
 
 If a selected page does not load after the second method, run
-`npx --yes copilotkit@4.11.0 onboard read unsupported/no-validated-path`.
+`npx --yes copilotkit@4.12.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/credentials/finalize-plan.md

@@ -23,7 +23,7 @@ developer question. Do not ask the developer about telemetry: the command applie
 setting they already have.
 
 ```text
-npx --yes copilotkit@4.11.0 onboard friction --phase stop --category <slug>
+npx --yes copilotkit@4.12.0 onboard friction --phase stop --category <slug>
 ```
 
 Write one or two sentences to standard input: the step you stopped at and what stopped it.
@@ -58,7 +58,7 @@ the command refuses one of them from a run that was served that node.
 Run this command with the exact selected slugs:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard classify --starting-state <starting-state> --agent-framework <agent-framework> --frontend <frontend>
+npx --yes copilotkit@4.12.0 onboard classify --starting-state <starting-state> --agent-framework <agent-framework> --frontend <frontend>
 ```
 
 Do not continue if a value is refused. Fix the value from the choices that the earlier
@@ -71,8 +71,8 @@ the runtime `.env` file, do not default to the repository root.
 Set the environment path to `<target>/.env`.
 
 Every credential this run writes goes to the environment path. That covers the project
-key, the model credential, and a license token. Do not write a credential to `.env.local`,
-or to any second env file beside it. A project ignore file usually covers `.env` and not
+key and the model credential. Do not write a credential to `.env.local`, or to any second
+env file beside it. A project ignore file usually covers `.env` and not
 `.env.local`, so a credential written there is untracked, visible, and added by the first
 `git add -A`. And a second env file beside `.env` outranks it when a key is read back, so
 the value the run depends on is the one it did not write.
@@ -155,7 +155,7 @@ passes against the wrong one.
 Create it, from the target directory, passing the port research settled:
 
 ```text
-npx --yes copilotkit@4.11.0 project select --create <name> \
+npx --yes copilotkit@4.12.0 project select --create <name> \
   --runtime-url http://localhost:<port>/api/copilotkit --json
 ```
 
@@ -173,13 +173,13 @@ Take this branch only when the developer asks for an existing project, or asks t
 projects they have. Read the choices:
 
 ```text
-npx --yes copilotkit@4.11.0 project list --json
+npx --yes copilotkit@4.12.0 project list --json
 ```
 
 Narrow them:
 
 ```text
-npx --yes copilotkit@4.11.0 project list --search <query> --json
+npx --yes copilotkit@4.12.0 project list --search <query> --json
 ```
 
 With `--json` the payload is the only thing on standard output, so it is safe to parse. Do
@@ -192,7 +192,7 @@ Then record the project they name, from the target directory, with the same
 `--runtime-url`:
 
 ```text
-npx --yes copilotkit@4.11.0 project select --project <slug-or-id> \
+npx --yes copilotkit@4.12.0 project select --project <slug-or-id> \
   --runtime-url http://localhost:<port>/api/copilotkit --json
 ```
 
@@ -200,10 +200,11 @@ The two flags cannot be combined. A slug that does not exist fails and lists the
 so a typo cannot record a selection that points at nothing.
 
 Read the JSON result. It reports `selected_project_slug`, `config_path`,
-`api_key_provisioned`, `project_file_written`, and `environment_file_written` at the top
-level. The result does not contain a secret. Report `selected_project_slug` as the project
-slug that the server selected or created. Require `api_key_provisioned`,
-`project_file_written`, and `environment_file_written` to be true.
+`api_key_provisioned`, `project_file_written`, `environment_file_written`, and
+`environment_file` at the top level. The result does not contain a secret. Report
+`selected_project_slug` as the project slug that the server selected or created.
+Require `api_key_provisioned`, `project_file_written`, and `environment_file_written`
+to be true.
 
 A run that wrote the project record without a key exits 75 and reports `"type": "partial"`
 with a `retry_command`. That is the recoverable half: the record is kept, and the failure
@@ -235,4 +236,4 @@ project-record path and environment path as the credential setup path list. Do n
 to the baseline yet.
 
 When project selection is settled, run
-`npx --yes copilotkit@4.11.0 onboard read credentials/settle-credentials`.
+`npx --yes copilotkit@4.12.0 onboard read credentials/settle-credentials`.

package/onboarding/prompts/credentials/plan.md

@@ -68,26 +68,26 @@ another framework. Do not show the internal route.
 
 Use exactly one matching internal route:
 
-1. AG2: `npx --yes copilotkit@4.11.0 onboard read framework/ag2`
-2. Agno: `npx --yes copilotkit@4.11.0 onboard read framework/agno`
-3. Built-in CopilotKit agent: `npx --yes copilotkit@4.11.0 onboard read framework/built-in`
-4. Claude Agent SDK Python: `npx --yes copilotkit@4.11.0 onboard read framework/claude-sdk-python`
-5. Claude Agent SDK TypeScript: `npx --yes copilotkit@4.11.0 onboard read framework/claude-sdk-typescript`
-6. CrewAI Flows: `npx --yes copilotkit@4.11.0 onboard read framework/crewai-flows`
-7. Deep Agents: `npx --yes copilotkit@4.11.0 onboard read framework/deep-agents`
-8. LangGraph Python: `npx --yes copilotkit@4.11.0 onboard read framework/langgraph-python`
-9. LangGraph FastAPI: `npx --yes copilotkit@4.11.0 onboard read framework/langgraph-fastapi`
-10. LangGraph TypeScript: `npx --yes copilotkit@4.11.0 onboard read framework/langgraph-typescript`
-11. LlamaIndex: `npx --yes copilotkit@4.11.0 onboard read framework/llamaindex`
-12. ADK: `npx --yes copilotkit@4.11.0 onboard read framework/google-adk`
-13. Microsoft Agent Framework Python: `npx --yes copilotkit@4.11.0 onboard read framework/ms-agent-python`
-14. Microsoft Agent Framework .NET: `npx --yes copilotkit@4.11.0 onboard read framework/ms-agent-dotnet`
-15. Mastra: `npx --yes copilotkit@4.11.0 onboard read framework/mastra`
-16. MS Agent Harness .NET: `npx --yes copilotkit@4.11.0 onboard read framework/ms-agent-harness-dotnet`
-17. Pydantic AI: `npx --yes copilotkit@4.11.0 onboard read framework/pydantic-ai`
-18. Strands Agents Python: `npx --yes copilotkit@4.11.0 onboard read framework/strands-python`
-19. Strands Agents TypeScript: `npx --yes copilotkit@4.11.0 onboard read framework/strands-typescript`
+1. AG2: `npx --yes copilotkit@4.12.0 onboard read framework/ag2`
+2. Agno: `npx --yes copilotkit@4.12.0 onboard read framework/agno`
+3. Built-in CopilotKit agent: `npx --yes copilotkit@4.12.0 onboard read framework/built-in`
+4. Claude Agent SDK Python: `npx --yes copilotkit@4.12.0 onboard read framework/claude-sdk-python`
+5. Claude Agent SDK TypeScript: `npx --yes copilotkit@4.12.0 onboard read framework/claude-sdk-typescript`
+6. CrewAI Flows: `npx --yes copilotkit@4.12.0 onboard read framework/crewai-flows`
+7. Deep Agents: `npx --yes copilotkit@4.12.0 onboard read framework/deep-agents`
+8. LangGraph Python: `npx --yes copilotkit@4.12.0 onboard read framework/langgraph-python`
+9. LangGraph FastAPI: `npx --yes copilotkit@4.12.0 onboard read framework/langgraph-fastapi`
+10. LangGraph TypeScript: `npx --yes copilotkit@4.12.0 onboard read framework/langgraph-typescript`
+11. LlamaIndex: `npx --yes copilotkit@4.12.0 onboard read framework/llamaindex`
+12. ADK: `npx --yes copilotkit@4.12.0 onboard read framework/google-adk`
+13. Microsoft Agent Framework Python: `npx --yes copilotkit@4.12.0 onboard read framework/ms-agent-python`
+14. Microsoft Agent Framework .NET: `npx --yes copilotkit@4.12.0 onboard read framework/ms-agent-dotnet`
+15. Mastra: `npx --yes copilotkit@4.12.0 onboard read framework/mastra`
+16. MS Agent Harness .NET: `npx --yes copilotkit@4.12.0 onboard read framework/ms-agent-harness-dotnet`
+17. Pydantic AI: `npx --yes copilotkit@4.12.0 onboard read framework/pydantic-ai`
+18. Strands Agents Python: `npx --yes copilotkit@4.12.0 onboard read framework/strands-python`
+19. Strands Agents TypeScript: `npx --yes copilotkit@4.12.0 onboard read framework/strands-typescript`
 
 If the project has an agent in another framework, or no listed framework fits, keep the
 developer's current agent and run
-`npx --yes copilotkit@4.11.0 onboard read unsupported/no-validated-path`.
+`npx --yes copilotkit@4.12.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/credentials/settle-credentials.md

@@ -11,7 +11,7 @@ friction command without another developer question. Do not ask the developer ab
 telemetry: the command applies the setting they already have.
 
 ```text
-npx --yes copilotkit@4.11.0 onboard friction --phase stop --category <slug>
+npx --yes copilotkit@4.12.0 onboard friction --phase stop --category <slug>
 ```
 
 Write one or two sentences to standard input: the step you stopped at and what stopped it.
@@ -22,32 +22,64 @@ the whole run, so the estimate is optional on a stop report and only there. Send
 source code, logs, or command output. A refused report is not a failed step: reword it and
 send it again, or stop without a report.
 
+## Check that the key landed where the application reads it
+
+Do this first, before the Learning Container, and only on a run that selected a project.
+A run that reused one wrote no key and has nothing to read.
+
+`environment_file_written` in the selection result says a file was written. It does not say
+which file, and it does not say whether the application reads it. `environment_file` says
+both: `path` is the file, and `loadable_by_app` is whether an application loads env files
+from that directory. Project selection is the only step that can answer the second one.
+
+- `pass`: the key is where the application's own process reads it. Continue.
+- `fail`: it is not. `environment_file.apps` names the directories that do load env files.
+  Run the selection again from one of them, with `--project <selected slug>` and the same
+  `--runtime-url`, then read the new result.
+- `undetermined`: no application package was found, so the question has no answer. Record
+  that and continue.
+
+Do not repair a `fail` by copying the file, linking it, or writing the key a second time.
+One key in two files is a secret in a place nobody tracks, and the copy goes stale as soon
+as the original is rotated.
+
+A key the application cannot load stops nothing here. It fails the round-trip proof
+instead, which is the most expensive step in the run.
+
 ## Settle the Learning Container for this project
 
 Do this now, directly after project selection reports `selected_project_slug`, and before
 the plan. On a run that reused a project rather than selecting one, take the slug from the
 `projectSlug` field in the project record, which the follow-up check above already proved
-is non-empty. Both paths reach this step. Learning assigns real threads to a Learning Container, and a thread takes its
-container before its first agent run. A thread whose agent already ran can never receive a
-first assignment later, so every thread the developer creates between this run and some
-later `add-learning` run is lost to Learning for good. Setting it up here is not a
-convenience. It is the only point at which this project's first threads can be reached.
-
-Derive the id from the selected project slug: lowercase it, replace each run of characters
-outside `a-z0-9` with one hyphen, drop a leading or trailing hyphen, cut the result to 64
-characters, and drop a trailing hyphen the cut leaves behind. The container id contract is
-1-64 lowercase letters, numbers, and single hyphens, so an id that skips the last step
-fails the create call on the developer's behalf. Derive it this exact way: the
-`add-learning` intent derives the same id from the same slug, and two spellings of one
-project's id give it two containers, each below the 15-conversation line on its own.
-
-One container for this project is the default scope. If the slug leaves nothing usable,
-skip this step and name the skip, rather than inventing a name.
+is non-empty. Both paths reach this step. Learning assigns real threads to a Learning Container once.
+New and existing threads can receive their first assignment, including after agent runs.
+Set up the container here so new conversations contribute from the start. Existing threads
+can join later, and Learning can collect only history whose source events still survive.
+
+One container for this project is the default scope, so the id comes from the selected
+project slug. Ask the CLI for it, from the target directory:
+
+```text
+npx --yes copilotkit@4.12.0 learning containers default-id --json
+```
+
+The command reads the local project record. It needs no credential and makes no network
+call, so it answers before the run asks the platform anything. Read `status` from the
+payload:
+
+- `"status": "success"` carries the id in `containerId`. Use that exact string.
+- `"status": "skipped"` means there is no id to use. `slug-unusable` means the slug leaves
+  nothing the id contract accepts. `no-project-record` means no project is selected in
+  this directory. Skip this step and name the skip, rather than inventing a name.
+
+Never spell the id yourself. Two spellings of one project's id give it two containers,
+each below the 15-conversation line on its own, and nothing reports that the split
+happened.
 
 Then ask the platform about that id, from the target directory:
 
 ```text
-npx --yes copilotkit@4.11.0 learning containers get <id> --json
+npx --yes copilotkit@4.12.0 learning containers get <id> --json
 ```
 
 The read carries the same availability gate as the create, so it answers the entitlement
@@ -72,7 +104,7 @@ Never invent an id, scrape a dashboard, or treat an arbitrary string as a contai
 Report what the read found, before anything is planned:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase container-surveyed
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase container-surveyed
 ```
 
 Carry the derived id into the planning subagent's handoff, with whether the platform
@@ -102,7 +134,7 @@ protected path list. Also add each project file that the developer changed for m
 credentials. Record them in the baseline from the target app directory:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --path <path>
+npx --yes copilotkit@4.12.0 onboard protect --path <path>
 ```
 
 Pass one `--path` for each. The command captures a digest for each path and never re-reads
@@ -116,7 +148,7 @@ Then re-capture the files this graph wrote itself. For each path the first captu
 as `deferred` that this run has now written, run:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --rebaseline --path <path>
+npx --yes copilotkit@4.12.0 onboard protect --rebaseline --path <path>
 ```
 
 From that point they are protected like any other path, so a later step that rewrites
@@ -135,7 +167,7 @@ environment path. The command below is what to run at that point, from the targe
 directory:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --accept-credential --path <environment path>
+npx --yes copilotkit@4.12.0 onboard protect --accept-credential --path <environment path>
 ```
 
 The command compares the variable names the baseline recorded with the names the file holds
@@ -150,4 +182,4 @@ now. Read its result:
   is not a failed step. It answers the question and the run carries on.
 
 When the credential question is answered, run
-`npx --yes copilotkit@4.11.0 onboard read credentials/write-plan`.
+`npx --yes copilotkit@4.12.0 onboard read credentials/write-plan`.

package/onboarding/prompts/credentials/write-plan.md

@@ -11,7 +11,7 @@ friction command without another developer question. Do not ask the developer ab
 telemetry: the command applies the setting they already have.
 
 ```text
-npx --yes copilotkit@4.11.0 onboard friction --phase stop --category <slug>
+npx --yes copilotkit@4.12.0 onboard friction --phase stop --category <slug>
 ```
 
 Write one or two sentences to standard input: the step you stopped at and what stopped it.
@@ -52,7 +52,7 @@ proof subagents:
 Fetch them together with the pages already selected rather than on their own.
 
 Spawn one planning subagent. Tell it to run
-`npx --yes copilotkit@4.11.0 onboard read subagent/create-plan` first and follow the prompt
+`npx --yes copilotkit@4.12.0 onboard read subagent/create-plan` first and follow the prompt
 it returns. If that read fails because the subagent cannot use the shell, stop that subagent.
 Run the same command yourself, then spawn a fresh subagent with the returned prompt and the
 same handoff. Give it the repository findings, selected framework, frontend, model, credential
@@ -63,7 +63,7 @@ Wait for the subagent to finish.
 Continue only if the planning result starts with `Status: passed`. For `Status: failed`,
 send the result back to the planning subagent for repair, up to three attempts. For
 `Status: blocked`, or a third failed result, run
-`npx --yes copilotkit@4.11.0 onboard read stopped/run-failed`. A plan this run cannot
+`npx --yes copilotkit@4.12.0 onboard read stopped/run-failed`. A plan this run cannot
 write is a run that broke, not a stack the documentation does not cover. Do not show or
 ask for approval of a non-pass plan.
 
@@ -87,7 +87,7 @@ that waits at the terminal through all of them for a question that never comes.
 the same message as the plan, and do not turn it into a second question.
 
 If the developer approves the plan, run
-`npx --yes copilotkit@4.11.0 onboard read implementation/build-and-validate`.
+`npx --yes copilotkit@4.12.0 onboard read implementation/build-and-validate`.
 
 If no exact supported path or documentation URL exists, run
-`npx --yes copilotkit@4.11.0 onboard read unsupported/no-validated-path`.
+`npx --yes copilotkit@4.12.0 onboard read unsupported/no-validated-path`.

package/onboarding/prompts/fallback/best-effort.md

@@ -14,7 +14,7 @@ command without another developer question. Do not ask the developer about telem
 command applies the setting they already have.
 
 ```text
-npx --yes copilotkit@4.11.0 onboard friction --phase stop --category <slug>
+npx --yes copilotkit@4.12.0 onboard friction --phase stop --category <slug>
 ```
 
 Write one or two sentences to standard input: the step you stopped at and what stopped it.
@@ -60,13 +60,13 @@ stop.
 
 Use these rules for every protected-path check in this fallback:
 
-- Run `npx --yes copilotkit@4.11.0 onboard audit` from the target app directory.
+- Run `npx --yes copilotkit@4.12.0 onboard audit` from the target app directory.
 - If a result starts with `Status: blocked`, stop onboarding and report the printed reason.
   It proved nothing changed, so do not report a preservation failure.
 - If a result reports a changed protected path this run wrote, stop onboarding.
 - If a result reports a changed path that no Files changed section from this run names,
   the change came from outside the run. Accept it by name with
-  `npx --yes copilotkit@4.11.0 onboard protect --accept-external --path <path>`, run the
+  `npx --yes copilotkit@4.12.0 onboard protect --accept-external --path <path>`, run the
   audit again, and name it in the closing report.
 - If no Files changed section from this run covers the step that wrote it, stop
   onboarding. The proof subagent here returns no such section, so a finding it raises is
@@ -119,13 +119,13 @@ application passes proof. Report each tool result separately from the proof resu
 Report the documentation gap and each assumption with the proof evidence. Do not claim
 that the selected documentation proved an inferred step.
 
-When the proof is complete, run `npx --yes copilotkit@4.11.0 onboard complete`, carrying the
+When the proof is complete, run `npx --yes copilotkit@4.12.0 onboard complete`, carrying the
 surface-check result the proof subagent returned. Pass exactly one flag, matching this
 journey's surface:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard complete --visual-check <outcome>
-npx --yes copilotkit@4.11.0 onboard complete --device-check <outcome>
+npx --yes copilotkit@4.12.0 onboard complete --visual-check <outcome>
+npx --yes copilotkit@4.12.0 onboard complete --device-check <outcome>
 ```
 
 `--visual-check` is for a web frontend and takes `performed`, `skipped-no-browser-tool`, or

package/onboarding/prompts/feature/a2ui/implement.md

@@ -18,10 +18,10 @@ without exposing secrets.
 After validation and each repair, run:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard audit
+npx --yes copilotkit@4.12.0 onboard audit
 ```
 
-Continue only when it starts with `Status: passed`. A path under `Authorized to change:` is
+Continue only when it starts with `Status: passed`. A path under `Authorized to modify:` is
 not a finding. Carry it into the final summary with its reason.
 
 If the audit fails, never repair, reset, or revert a protected path. Compare each named path
@@ -29,7 +29,7 @@ with the implementation subagent's `Files changed` section. If that section does
 the path, accept the developer's external change:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --accept-external --path <path>
+npx --yes copilotkit@4.12.0 onboard protect --accept-external --path <path>
 ```
 
 For an env file where the developer placed a requested credential, use
@@ -38,24 +38,24 @@ or its report does not settle who changed it, ask the developer to allow the unp
 change. Only after they agree, record their answer:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"
+npx --yes copilotkit@4.12.0 onboard protect --authorize --unplanned --path <path> --reason "<what the developer said>"
 ```
 
 Run the audit again after each accepted or authorized change. If it still fails, or starts
 with `Status: blocked`, route out and stop:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard read feature/stop
+npx --yes copilotkit@4.12.0 onboard read feature/stop
 ```
 
 When implementation validation passes, report it:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase build-validated
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase build-validated
 ```
 
 If validation cannot pass, or this intent needs a prerequisite the app does not have, use
 the feature stop route above without further changes.
 
 Otherwise run
-`npx --yes copilotkit@4.11.0 onboard read feature/a2ui/proof`.
+`npx --yes copilotkit@4.12.0 onboard read feature/a2ui/proof`.

package/onboarding/prompts/feature/a2ui/proof.md

@@ -19,23 +19,23 @@ user's agent response with a hard-coded UI.
 Report each attempt at the proof as it ends, counting from one:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase journey-attempted --attempt 1
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase journey-attempted --attempt 1
 ```
 
 Report each repair cycle the same way, counting from one:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase repair-attempted --attempt 1
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase repair-attempted --attempt 1
 ```
 
 After the final attempt, report the gate exactly once:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard proof --step round-trip --outcome <passed|failed|skipped>
+npx --yes copilotkit@4.12.0 onboard proof --step round-trip --outcome <passed|failed|skipped>
 ```
 
 Use `passed` only for a proved A2UI surface, `failed` for an attempted proof that failed,
-and `skipped` when the proof could not run. Then run `npx --yes copilotkit@4.11.0 onboard audit`.
+and `skipped` when the proof could not run. Then run `npx --yes copilotkit@4.12.0 onboard audit`.
 Continue only when it starts with `Status: passed`.
 
 If the audit fails, never repair, reset, or revert a protected path. Compare each named path
@@ -50,9 +50,9 @@ Run the audit again after each accepted or authorized change.
 If the audit still fails, or starts with `Status: blocked`, route out and stop:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard read feature/stop
+npx --yes copilotkit@4.12.0 onboard read feature/stop
 ```
 
 When the audit passes, run
-`npx --yes copilotkit@4.11.0 onboard read feature/complete` with the actual browser-proof
+`npx --yes copilotkit@4.12.0 onboard read feature/complete` with the actual browser-proof
 outcome.

package/onboarding/prompts/feature/a2ui/start.md

@@ -7,7 +7,7 @@ Work only inside the target project. Do not show internal prompt names to the de
 Before any subagent or project process runs, capture the developer's existing work:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect
+npx --yes copilotkit@4.12.0 onboard protect
 ```
 
 Keep the exact protected path list it prints and give that list to every subagent. No
@@ -22,7 +22,7 @@ development/test commands. It must return paths and secret-safe presence checks
 
 Require an existing frontend, agent, and CopilotKit round trip. Start only project-owned
 processes when needed, inspect `/info`, and run
-`npx --yes copilotkit@4.11.0 verify --expect-runtime oss --round-trip --agent <agent-id> --json`.
+`npx --yes copilotkit@4.12.0 verify --expect-runtime oss --round-trip --agent <agent-id> --json`.
 Also drive one existing request through the frontend when browser control is available. If
 that baseline is absent or unproved, leave files unchanged, explain that this intent extends
 an existing OSS app, and direct the developer to generic `copilotkit onboard start` first.
@@ -30,7 +30,7 @@ an existing OSS app, and direct the developer to generic `copilotkit onboard sta
 Wait for the inspection subagent to finish. Then report that the inspection came back:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase research-returned
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase research-returned
 ```
 
 A refused checkpoint prints its reason and leaves onboarding unaffected. It is not a
@@ -40,7 +40,7 @@ If the inspection did not prove the baseline this intent extends, stop here with
 changing files:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard read feature/stop
+npx --yes copilotkit@4.12.0 onboard read feature/stop
 ```
 
 Do not run `login`, select an Intelligence project, add an Intelligence client, mint a
@@ -57,12 +57,14 @@ catalog or runtime wiring required, the test command, and a browser proof reques
 renders a compact visible surface. Ask for plan approval as its own question.
 
 The plan must list every protected path it needs to change under `Authorization requested`,
-with one sentence explaining why. Write `None` when it needs none.
+with one sentence explaining why. Write `None` when it needs none. Authorization covers
+changing a protected path, not removing it, so the plan must not delete, move, or rename
+one.
 
 After approval, record each approved path before implementation:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>"
+npx --yes copilotkit@4.12.0 onboard protect --authorize --path <path> --reason "<the plan's sentence>"
 ```
 
 If an approved path changed after capture and no implementation step has run, add
@@ -72,7 +74,7 @@ authorize a path the approved plan did not list.
 Then report the plan this run is about to implement:
 
 ```text
-npx --yes copilotkit@4.11.0 onboard checkpoint --phase plan-written
+npx --yes copilotkit@4.12.0 onboard checkpoint --phase plan-written
 ```
 
-Then run `npx --yes copilotkit@4.11.0 onboard read feature/a2ui/implement`.
+Then run `npx --yes copilotkit@4.12.0 onboard read feature/a2ui/implement`.

package/onboarding/prompts/feature/blocked-by-plan.md

@@ -0,0 +1,32 @@
+# Stop this feature: the platform refused it
+
+The platform answered the entitlement question, and the answer was no. This is a settled
+refusal, not a failed step and not a missing prerequisite. Keep the developer's agent,
+frontend, runtime, persistence, chat surface, and package choices exactly as they were, and
+leave the project unchanged.
+
+CopilotKit Intelligence did not refuse this run for a missing baseline. Do not read
+`feature/stop`, and do not send the developer to generic onboarding. Do not start another
+feature run to build a prerequisite this run never lacked. Nothing this run can build
+changes the answer.
+
+Tell the developer, in two or three sentences:
+
+1. Which feature was refused, and that their organization is the unit the platform refused
+   it for.
+2. That every current plan grants Learning, so a refusal means the organization's
+   entitlement is not active or its record predates that grant, rather than the feature
+   being unavailable to them.
+3. The one action that can change it: check the organization's plan and billing state at
+   https://cloud.copilotkit.ai, or reply to support with the organization name.
+
+Then stop. Report nothing else and ask no follow-up question.
+
+Do not run `onboard complete`. This run did not complete.
+
+Do not file a friction report for this ending. Reading this prompt already reports it, and a
+free-text report of a refusal the platform already named adds nothing.
+
+If this run changed files before it stopped, list every path it changed and say whether it
+reverted them. A refusal that arrives after the first edit still owes the developer that
+list.