config-editor-base 3.0.0 → 3.0.2

package/dist/index.js

@@ -19779,1436 +19779,1353 @@ var obdPids = [
 		service: "01",
 		pid: "00",
 		description: "PIDs supported [01 - 20]",
-		name: "PIDs_01_20",
-		isotp: false
+		name: "PIDsSupported_01_20",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "01",
 		description: "Monitor status since DTCs cleared",
 		name: "MonitorStatus",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "02",
 		description: "Freeze DTC",
 		name: "FreezeDTC",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "03",
 		description: "Fuel system status",
 		name: "FuelSystemStatus",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "04",
 		description: "Calculated engine load",
 		name: "CalcEngineLoad",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "05",
 		description: "Engine coolant temperature",
-		name: "EngCooTem",
-		isotp: false
+		name: "EngineCoolantTemp",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "06",
 		description: "Short term fuel trim (bank 1)",
-		name: "ShoFueTriBan1",
-		isotp: false
+		name: "ShortFuelTrimBank1",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "07",
 		description: "Long term fuel trim (bank 1)",
-		name: "LonFueTriBan1",
-		isotp: false
+		name: "LongFuelTrimBank1",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "08",
 		description: "Short term fuel trim (bank 2)",
-		name: "ShoFueTriBan2",
-		isotp: false
+		name: "ShortFuelTrimBank2",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "09",
 		description: "Long term fuel trim (bank 2)",
-		name: "LonFueTriBan2",
-		isotp: false
+		name: "LongFuelTrimBank2",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "0A",
 		description: "Fuel pressure (gauge pressure)",
 		name: "FuelPressure",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "0B",
 		description: "Intake manifold absolute pressure",
-		name: "IntManAbsPre",
-		isotp: false
+		name: "IntakeManiAbsPress",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "0C",
 		description: "Engine speed",
 		name: "EngineRPM",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "0D",
 		description: "Vehicle speed",
 		name: "VehicleSpeed",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "0E",
 		description: "Timing advance",
 		name: "TimingAdvance",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "0F",
 		description: "Intake air temperature",
-		name: "IntAirTem",
-		isotp: false
+		name: "IntakeAirTemperature",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "0A",
+		pid: "10",
 		description: "Mass air flow sensor air flow rate",
 		name: "MAFAirFlowRate",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "0B",
+		pid: "11",
 		description: "Throttle position",
 		name: "ThrottlePosition",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "0C",
+		pid: "12",
 		description: "Commanded secondary air status",
 		name: "CmdSecAirStatus",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "0D",
+		pid: "13",
 		description: "Oxygen sensors present (2 banks)",
-		name: "OxyS_2Ban",
-		isotp: false
+		name: "OxySensorsPresent_2Banks",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "0E",
+		pid: "14",
 		description: "Oxygen sensor 1 (voltage)",
 		name: "OxySensor1_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "0E",
-		description: "Oxygen sensor 1 (short term fuel trim)",
-		name: "OxySensor1_STFT",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "0F",
+		pid: "15",
 		description: "Oxygen sensor 2 (voltage)",
 		name: "OxySensor2_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "0F",
-		description: "Oxygen sensor 2 (short term fuel trim)",
-		name: "OxySensor2_STFT",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "10",
+		pid: "16",
 		description: "Oxygen sensor 3 (voltage)",
 		name: "OxySensor3_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "10",
-		description: "Oxygen sensor 3 (short term fuel trim)",
-		name: "OxySensor3_STFT",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "11",
+		pid: "17",
 		description: "Oxygen sensor 4 (voltage)",
 		name: "OxySensor4_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "11",
-		description: "Oxygen sensor 4 (short term fuel trim)",
-		name: "OxySensor4_STFT",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "12",
+		pid: "18",
 		description: "Oxygen sensor 5 (voltage)",
 		name: "OxySensor5_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "12",
-		description: "Oxygen sensor 5 (short term fuel trim)",
-		name: "OxySensor5_STFT",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "13",
+		pid: "19",
 		description: "Oxygen sensor 6 (voltage)",
 		name: "OxySensor6_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "13",
-		description: "Oxygen sensor 6 (short term fuel trim)",
-		name: "OxySensor6_STFT",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "1A",
 		description: "Oxygen sensor 7 (voltage)",
 		name: "OxySensor7_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1A",
-		description: "Oxygen sensor 7 (short term fuel trim)",
-		name: "OxySensor7_STFT",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "1B",
 		description: "Oxygen sensor 8 (voltage)",
 		name: "OxySensor8_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1B",
-		description: "Oxygen sensor 9 (short term fuel trim)",
-		name: "OxySensor8_STFT",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "1C",
 		description: "OBD standards the vehicle conforms to",
 		name: "OBDStandard",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "1D",
 		description: "Oxygen sensors present (4 banks)",
-		name: "OxyS_4Ban",
-		isotp: false
+		name: "OxySensorsPresent_4Banks",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "1E",
 		description: "Auxiliary input status",
-		name: "AuxInpSta",
-		isotp: false
+		name: "AuxiliaryInputStatus",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "1F",
 		description: "Run time since engine start",
-		name: "TimSinEngSta",
-		isotp: false
+		name: "TimeSinceEngStart",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "14",
+		pid: "20",
 		description: "PIDs supported [21 - 40]",
-		name: "PIDs_21_40",
-		isotp: false
+		name: "PIDsSupported_21_40",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "15",
+		pid: "21",
 		description: "Distance traveled with MIL on",
 		name: "DistanceMILOn",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "16",
+		pid: "22",
 		description: "Fuel rail pres. (rel. to manifold vacuum)",
 		name: "FuelRailPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "17",
-		description: "Fuel rail gauge pres. (diesel, gas inject)",
+		pid: "23",
+		description: "Fuel rail gauge pressure (diesel / GDI)",
 		name: "FuelRailGaug",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "18",
+		pid: "24",
 		description: "Oxygen sensor 1 (air-fuel equiv. ratio)",
 		name: "OxySensor1_FAER",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "18",
-		description: "Oxygen sensor 1 (voltage)",
-		name: "OxySensor1_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "19",
+		pid: "25",
 		description: "Oxygen sensor 2 (air-fuel equiv. ratio)",
 		name: "OxySensor2_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "19",
-		description: "Oxygen sensor 2 (voltage)",
-		name: "OxySensor2_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "1A",
+		pid: "26",
 		description: "Oxygen sensor 3 (air-fuel equiv. ratio)",
 		name: "OxySensor3_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1A",
-		description: "Oxygen sensor 3 (voltage)",
-		name: "OxySensor3_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "1B",
+		pid: "27",
 		description: "Oxygen sensor 4 (air-fuel equiv. ratio)",
 		name: "OxySensor4_FAER",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "1B",
-		description: "Oxygen sensor 4 (voltage)",
-		name: "OxySensor4_Volt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1C",
+		pid: "28",
 		description: "Oxygen sensor 5 (air-fuel equiv. ratio)",
 		name: "OxySensor5_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1C",
-		description: "Oxygen sensor 5 (voltage)",
-		name: "OxySensor5_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "1D",
+		pid: "29",
 		description: "Oxygen sensor 6 (air-fuel equiv. ratio)",
 		name: "OxySensor6_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "1D",
-		description: "Oxygen sensor 6 (voltage)",
-		name: "OxySensor6_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "2A",
 		description: "Oxygen sensor 7 (air-fuel equiv. ratio)",
 		name: "OxySensor7_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "2A",
-		description: "Oxygen sensor 7 (voltage)",
-		name: "OxySensor7_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "2B",
 		description: "Oxygen sensor 8 (air-fuel equiv. ratio)",
 		name: "OxySensor8_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "2B",
-		description: "Oxygen sensor 8 (voltage)",
-		name: "OxySensor8_Volt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "2C",
 		description: "Commanded EGR",
 		name: "CmdEGR",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "2D",
 		description: "EGR Error",
 		name: "EGRError",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "2E",
 		description: "Commanded evaporative purge",
 		name: "CmdEvapPurge",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "2F",
 		description: "Fuel tank level input",
 		name: "FuelTankLevel",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "1E",
+		pid: "30",
 		description: "Warmups since DTCs cleared",
-		name: "WarUpsSinCodCle",
-		isotp: false
+		name: "WarmUpsSinceCodeClear",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "1F",
+		pid: "31",
 		description: "Distance traveled since DTCs cleared",
-		name: "DisSinCodCle",
-		isotp: false
+		name: "DistanceSinceCodeClear",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "20",
+		pid: "32",
 		description: "Evap. system vapor pressure",
 		name: "EvapSysVaporPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "21",
+		pid: "33",
 		description: "Absolute barometric pressure",
 		name: "AbsBaroPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "22",
-		description: "Oxygen sensor 1 (air-fuel equiv. ratio)",
+		pid: "34",
+		description: "Oxygen sensor 1: A/F equivalence ratio & current",
 		name: "OxySensor1_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "22",
-		description: "Oxygen sensor 1 (current)",
-		name: "OxySensor1_Crnt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "23",
-		description: "Oxygen sensor 2 (air-fuel equiv. ratio)",
+		pid: "35",
+		description: "Oxygen sensor 2: A/F equivalence ratio & current",
 		name: "OxySensor2_FAER",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "23",
-		description: "Oxygen sensor 2 (current)",
-		name: "OxySensor2_Crnt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "24",
-		description: "Oxygen sensor 3 (air-fuel equiv. ratio)",
+		pid: "36",
+		description: "Oxygen sensor 3: A/F equivalence ratio & current",
 		name: "OxySensor3_FAER",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "24",
-		description: "Oxygen sensor 3 (current)",
-		name: "OxySensor3_Crnt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "25",
-		description: "Oxygen sensor 4 (air-fuel equiv. ratio)",
+		pid: "37",
+		description: "Oxygen sensor 4: A/F equivalence ratio & current",
 		name: "OxySensor4_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "25",
-		description: "Oxygen sensor 4 (current)",
-		name: "OxySensor4_Crnt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "26",
-		description: "Oxygen sensor 5 (air-fuel equiv. ratio)",
+		pid: "38",
+		description: "Oxygen sensor 5: A/F equivalence ratio & current",
 		name: "OxySensor5_FAER",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "26",
-		description: "Oxygen sensor 5 (current)",
-		name: "OxySensor5_Crnt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "27",
-		description: "Oxygen sensor 6 (air-fuel equiv. ratio)",
+		pid: "39",
+		description: "Oxygen sensor 6: A/F equivalence ratio & current",
 		name: "OxySensor6_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "27",
-		description: "Oxygen sensor 6 (current)",
-		name: "OxySensor6_Crnt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "3A",
-		description: "Oxygen sensor 7 (air-fuel equiv. ratio)",
+		description: "Oxygen sensor 7: A/F equivalence ratio & current",
 		name: "OxySensor7_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "3A",
-		description: "Oxygen sensor 7 (current)",
-		name: "OxySensor7_Crnt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "3B",
-		description: "Oxygen sensor 8 (air-fuel equiv. ratio)",
+		description: "Oxygen sensor 8: A/F equivalence ratio & current",
 		name: "OxySensor8_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "3B",
-		description: "Oxygen sensor 8 (current)",
-		name: "OxySensor8_Crnt",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "3C",
-		description: "Catalyst temperature (bank 1, sensor 1)",
-		name: "CatTemBan1Sen1",
-		isotp: false
+		description: "Catalyst temperature: Bank 1, Sensor 1",
+		name: "CatTempBank1Sens1",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "3D",
-		description: "Catalyst temperature (bank 2, sensor 1)",
-		name: "CatTemBan2Sen1",
-		isotp: false
+		description: "Catalyst temperature: Bank 2, Sensor 1",
+		name: "CatTempBank2Sens1",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "3E",
-		description: "Catalyst temperature (bank 1, sensor 2)",
-		name: "CatTemBan1Sen2",
-		isotp: false
+		description: "Catalyst temperature: Bank 1, Sensor 2",
+		name: "CatTempBank1Sens2",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "3F",
-		description: "Catalyst temperature (bank 2, sensor 2)",
-		name: "CatTemBan2Sen2",
-		isotp: false
+		description: "Catalyst temperature: Bank 2, Sensor 2",
+		name: "CatTempBank2Sens2",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "28",
+		pid: "40",
 		description: "PIDs supported [41 - 60]",
-		name: "PIDs_41_60",
-		isotp: false
+		name: "PIDsSupported_41_60",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "29",
+		pid: "41",
 		description: "Monitor status this drive cycle",
-		name: "MonStaDriCyc",
-		isotp: false
+		name: "MonStatusDriveCycle",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "2A",
+		pid: "42",
 		description: "Control module voltage",
-		name: "ConModVol",
-		isotp: false
+		name: "ControlModuleVolt",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "2B",
+		pid: "43",
 		description: "Absolute load value",
 		name: "AbsLoadValue",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "2C",
+		pid: "44",
 		description: "Commanded air-fuel equiv. ratio",
 		name: "FuelAirCmdEquiv",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "2D",
+		pid: "45",
 		description: "Relative throttle position",
 		name: "RelThrottlePos",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "2E",
+		pid: "46",
 		description: "Ambient air temperature",
 		name: "AmbientAirTemp",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "2F",
+		pid: "47",
 		description: "Absolute throttle position B",
 		name: "AbsThrottlePosB",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "30",
+		pid: "48",
 		description: "Absolute throttle position C",
 		name: "AbsThrottlePosC",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "31",
+		pid: "49",
 		description: "Accelerator pedal position D",
 		name: "AbsThrottlePosD",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "4A",
 		description: "Accelerator pedal position E",
 		name: "AbsThrottlePosE",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "4B",
 		description: "Accelerator pedal position F",
 		name: "AbsThrottlePosF",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "4C",
 		description: "Commanded throttle actuator",
 		name: "CmdThrottleAct",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "4D",
 		description: "Time run with MIL on",
 		name: "TimeRunMILOn",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "4E",
 		description: "Time since DTCs cleared",
-		name: "TimSinCodCle",
-		isotp: false
+		name: "TimeSinceCodeClear",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "4F",
 		description: "Max fuel-air equiv. ratio",
 		name: "Max_FAER",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "4F",
-		description: "Max oxygen sensor voltage",
-		name: "Max_OxySensVol",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "4F",
-		description: "Max oxygen sensor current",
-		name: "Max_OxySensCrnt",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "4F",
-		description: "Max intake manifold absolute pressure",
-		name: "Max_IntM",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "32",
+		pid: "50",
 		description: "Max air flow rate from MAF sensor",
 		name: "Max_AirFlowMAF",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "33",
+		pid: "51",
 		description: "Fuel type",
 		name: "FuelType",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "34",
+		pid: "52",
 		description: "Ethanol fuel percentage",
 		name: "EthanolFuelPct",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "35",
+		pid: "53",
 		description: "Absolute evap system vapor pressure",
-		name: "AbsEvaSysVapPre",
-		isotp: false
+		name: "AbsEvapSysVapPres",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "36",
+		pid: "54",
 		description: "Evap system vapor pressure",
 		name: "EvapSysVapPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "37",
+		pid: "55",
 		description: "Short term sec. oxygen trim (bank 1)",
-		name: "ShoSecOxyTriBan1",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "37",
-		description: "Short term sec. oxygen trim (bank 3)",
-		name: "ShoSecOxyTriBan3",
-		isotp: false
+		name: "ShortSecOxyTrimBank1",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "38",
+		pid: "56",
 		description: "Long term sec. oxygen trim (bank 1)",
-		name: "LonSecOxyTriBan1",
-		isotp: false
+		name: "LongSecOxyTrimBank1",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "38",
-		description: "Long term sec. oxygen trim (bank 3)",
-		name: "LonSecOxyTriBan3",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "39",
+		pid: "57",
 		description: "Short term sec. oxygen trim (bank 2)",
-		name: "ShoSecOxyTriBan2",
-		isotp: false
+		name: "ShortSecOxyTrimBank2",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "39",
-		description: "Short term sec. oxygen trim (bank 4)",
-		name: "ShoSecOxyTriBan4",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "3A",
+		pid: "58",
 		description: "Long term sec. oxygen trim (bank 2)",
-		name: "LonSecOxyTriBan2",
-		isotp: false
+		name: "LongSecOxyTrimBank2",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "3A",
-		description: "Long term sec. oxygen trim (bank 4)",
-		name: "LonSecOxyTriBan4",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "3B",
+		pid: "59",
 		description: "Fuel rail absolute pressure",
 		name: "FuelRailAbsPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "5A",
 		description: "Relative accelerator pedal position",
 		name: "RelAccelPedalPos",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "5B",
 		description: "Hybrid battery pack remaining life",
-		name: "HybBatPacRemLif",
-		isotp: false
+		name: "HybrBatPackRemLife",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "5C",
 		description: "Engine oil temperature",
 		name: "EngineOilTemp",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "5D",
 		description: "Fuel injection timing",
-		name: "FueInjTim",
-		isotp: false
+		name: "FuelInjectionTiming",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "5E",
 		description: "Engine fuel rate",
 		name: "EngineFuelRate",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "5F",
 		description: "Emission requirements",
 		name: "EmissionReq",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "3C",
+		pid: "60",
 		description: "PIDs supported [61 - 80]",
-		name: "PIDs_61_80",
-		isotp: false
+		name: "PIDsSupported_61_80",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "3D",
+		pid: "61",
 		description: "Demanded engine percent torque",
 		name: "DemandEngTorqPct",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "3E",
+		pid: "62",
 		description: "Actual engine percent torque",
 		name: "ActualEngTorqPct",
-		isotp: false
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "3F",
+		pid: "63",
 		description: "Engine reference torque",
 		name: "EngRefTorq",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "40",
-		description: "Engine pct. torque (idle)",
+		pid: "64",
+		description: "Engine percent torque data (idle + points 1–4)",
 		name: "EngPctTorq_Idle",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "40",
-		description: "Engine pct. torque (engine point 1)",
-		name: "EngPctTorq_EP1",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "40",
-		description: "Engine pct. torque (engine point 2)",
-		name: "EngPctTorq_EP2",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "40",
-		description: "Engine pct. torque (engine point 3)",
-		name: "EngPctTorq_EP3",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "40",
-		description: "Engine pct. torque (engine point 4)",
-		name: "EngPctTorq_EP4",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "41",
+		pid: "65",
 		description: "Auxiliary input/output supported",
 		name: "AuxInputOutput",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "42",
-		description: "Mass air flow sensor (A)",
+		pid: "66",
+		description: "Mass air flow sensor data (A/B supported + g/s)",
 		name: "MAFSensorA",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "42",
-		description: "Mass air flow sensor (B)",
-		name: "MAFSensorB",
-		isotp: false
+		pid: "67",
+		description: "Engine coolant temperature (sensors 1–2 + support bits)",
+		name: "EngineCoolantTemp1",
+		isotp: false,
+		bytes_returned: 3
 	},
 	{
 		service: "01",
-		pid: "43",
-		description: "Engine coolant temperature (sensor 1)",
-		name: "EngCooTem1",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "43",
-		description: "Engine coolant temperature (sensor 2)",
-		name: "EngCooTem2",
-		isotp: false
+		pid: "68",
+		description: "Intake air temperature sensor (sensors 1–2 + support bits)",
+		name: "IntakeAirTempSens1",
+		isotp: false,
+		bytes_returned: 3
 	},
 	{
 		service: "01",
-		pid: "44",
-		description: "Intake air temperature (sensor 1)",
-		name: "IntAirTemSen1",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "44",
-		description: "Intake air temperature (sensor 2)",
-		name: "IntAirTemSen2",
-		isotp: false
-	},
-	{
-		service: "01",
-		pid: "45",
-		description: "Commanded EGR and EGR error",
+		pid: "69",
+		description: "Actual EGR, commanded EGR & EGR error",
 		name: "CmdEGR_EGRError",
-		isotp: false
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
 		pid: "6A",
 		description: "Com. diesel intake air flow ctr/position",
 		name: "CmdDieselIntAir",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
 		pid: "6B",
 		description: "Exhaust gas recirculation temperature",
 		name: "ExhaustGasTemp",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
 		pid: "6C",
 		description: "Com. throttle actuator ctr./position",
-		name: "CmdThrActRel",
-		isotp: false
+		name: "CmdThrottleActRel",
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
 		pid: "6D",
 		description: "Fuel pressure control system",
 		name: "FuelPresContrSys",
-		isotp: false
+		isotp: true,
+		bytes_returned: 11
 	},
 	{
 		service: "01",
 		pid: "6E",
 		description: "Injection pressure control system",
 		name: "InjPresContrSys",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "6F",
 		description: "Turbocharger compressor inlet pres.",
 		name: "TurboComprPres",
-		isotp: false
+		isotp: false,
+		bytes_returned: 3
 	},
 	{
 		service: "01",
-		pid: "46",
+		pid: "70",
 		description: "Boost pressure control",
 		name: "BoostPresCntrl",
-		isotp: false
+		isotp: true,
+		bytes_returned: 10
 	},
 	{
 		service: "01",
-		pid: "47",
+		pid: "71",
 		description: "Variable geometry turbo control",
-		name: "VarGeoTurVGTCtr",
-		isotp: false
+		name: "VariableGeoTurboVGTCtr",
+		isotp: true,
+		bytes_returned: 6
 	},
 	{
 		service: "01",
-		pid: "48",
+		pid: "72",
 		description: "Wastegate control",
 		name: "WastegateControl",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "49",
+		pid: "73",
 		description: "Exhaust pressure",
 		name: "ExhaustPressure",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "4A",
+		pid: "74",
 		description: "Turbocharger RPM",
 		name: "TurbochargerRpm",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "4B",
+		pid: "75",
 		description: "Turbocharger temperature",
-		name: "TurTem",
-		isotp: false
+		name: "TurbochargerTemperature",
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
-		pid: "4C",
+		pid: "76",
 		description: "Turbocharger temperature",
-		name: "TurTem",
-		isotp: false
+		name: "TurbochargerTemperature",
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
-		pid: "4D",
+		pid: "77",
 		description: "Charge air cooler temperature",
-		name: "ChaAirCooTem",
-		isotp: false
+		name: "ChargeAirCoolerTemperature",
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "4E",
+		pid: "78",
 		description: "EGT (bank 1)",
 		name: "EGT_Bank1",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
-		pid: "4F",
+		pid: "79",
 		description: "EGT (bank 2)",
 		name: "EGT_Bank2",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "7A",
 		description: "Diesel particulate filter - diff. pressure",
-		name: "DPF_Diff",
-		isotp: false
+		name: "DPF_DifferentialPressure",
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
 		pid: "7B",
 		description: "Diesel particulate filter",
 		name: "DPF",
-		isotp: false
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
 		pid: "7C",
 		description: "Diesel particulate filter - temperature",
 		name: "DPF_Temperature",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "7D",
 		description: "NOx NTE control area status",
-		name: "NOx_NTE_Cont",
-		isotp: false
+		name: "NOx_NTE_ControlAreaStatus",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "7E",
 		description: "PM NTE control area status",
-		name: "PM_NTE_Cont",
-		isotp: false
+		name: "PM_NTE_ControlAreaStatus",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "7F",
 		description: "Engine run time",
 		name: "EngineRunTime",
-		isotp: false
+		isotp: true,
+		bytes_returned: 13
 	},
 	{
 		service: "01",
-		pid: "50",
+		pid: "80",
 		description: "PIDs supported [81 - A0]",
-		name: "PIDs_81_A0",
-		isotp: false
+		name: "PIDsSupported_81_A0",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
-		pid: "51",
+		pid: "81",
 		description: "Engine run time for AECD",
-		name: "Engi_AECD",
-		isotp: false
+		name: "EngineRunTime_AECD",
+		isotp: true,
+		bytes_returned: 41
 	},
 	{
 		service: "01",
-		pid: "52",
+		pid: "82",
 		description: "Engine run time for AECD",
-		name: "Engi_AECD",
-		isotp: false
+		name: "EngineRunTime_AECD",
+		isotp: true,
+		bytes_returned: 41
 	},
 	{
 		service: "01",
-		pid: "53",
+		pid: "83",
 		description: "NOx sensor",
 		name: "NOxSensor",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
-		pid: "54",
+		pid: "84",
 		description: "Manifold surface temperature",
-		name: "ManSurTem",
-		isotp: false
+		name: "ManifoldSurfaceTemperature",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
-		pid: "55",
+		pid: "85",
 		description: "NOx reagent system",
 		name: "NOxReagentSystem",
-		isotp: false
+		isotp: true,
+		bytes_returned: 10
 	},
 	{
 		service: "01",
-		pid: "56",
+		pid: "86",
 		description: "Particulate matter sensor",
 		name: "PM_Sensor",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "57",
+		pid: "87",
 		description: "Intake manifold absolute pressure",
-		name: "IntManAbsPre",
-		isotp: false
+		name: "IntakeManifoldAbsolutePressure",
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "58",
+		pid: "88",
 		description: "SCR induce system",
 		name: "SCR_InduceSystem",
-		isotp: false
+		isotp: true,
+		bytes_returned: 13
 	},
 	{
 		service: "01",
-		pid: "59",
+		pid: "89",
 		description: "Run time for AECD #11-#15",
-		name: "RunT_11_15",
-		isotp: false
+		name: "RunTimeForAECD_11_15",
+		isotp: true,
+		bytes_returned: 41
 	},
 	{
 		service: "01",
 		pid: "8A",
 		description: "Run time for AECD #16-#20",
-		name: "RunT_16_20",
-		isotp: false
+		name: "RunTimeForAECD_16_20",
+		isotp: true,
+		bytes_returned: 41
 	},
 	{
 		service: "01",
 		pid: "8B",
 		description: "Diesel aftertreatment",
-		name: "DieAft",
-		isotp: false
+		name: "DieselAftertreatment",
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
 		pid: "8C",
 		description: "O2 sensor (wide range)",
-		name: "O2Se_Wide",
-		isotp: false
+		name: "O2Sensor_WideRange",
+		isotp: true,
+		bytes_returned: 17
 	},
 	{
 		service: "01",
 		pid: "8D",
 		description: "Throttle position G",
-		name: "ThrPosG",
-		isotp: false
+		name: "ThrottlePositionG",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "8E",
 		description: "Engine friction percent torque",
-		name: "EngFriPerTor",
-		isotp: false
+		name: "EngineFrictionPercentTorque",
+		isotp: false,
+		bytes_returned: 1
 	},
 	{
 		service: "01",
 		pid: "8F",
 		description: "Particulate matter sensor (bank 1 & 2)",
 		name: "PMSensorBank1_2",
-		isotp: false
+		isotp: true,
+		bytes_returned: 7
 	},
 	{
 		service: "01",
-		pid: "5A",
+		pid: "90",
 		description: "WWH-OBD vehicle OBD system Info",
 		name: "WWH_OBD_SysInfo",
-		isotp: false
+		isotp: false,
+		bytes_returned: 3
 	},
 	{
 		service: "01",
-		pid: "5B",
+		pid: "91",
 		description: "WWH-OBD vehicle OBD system Info",
 		name: "WWH_OBD_SysInfo",
-		isotp: false
+		isotp: false,
+		bytes_returned: 5
 	},
 	{
 		service: "01",
-		pid: "5C",
+		pid: "92",
 		description: "Fuel system control",
-		name: "FueSysCon",
-		isotp: false
+		name: "FuelSystemControl",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
-		pid: "5D",
+		pid: "93",
 		description: "WWH-OBD counters support",
-		name: "WWH_OBD_CtrS",
-		isotp: false
+		name: "WWH_OBD_CtrSupport",
+		isotp: false,
+		bytes_returned: 3
 	},
 	{
 		service: "01",
-		pid: "5E",
+		pid: "94",
 		description: "NOx warning and inducement system",
-		name: "NOxWarIndSys",
-		isotp: false
+		name: "NOxWarningInducementSys",
+		isotp: true,
+		bytes_returned: 12
 	},
 	{
 		service: "01",
-		pid: "62",
+		pid: "98",
 		description: "EGT sensor",
 		name: "EGT_Sensor",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
-		pid: "63",
+		pid: "99",
 		description: "EGT sensor",
 		name: "EGT_Sensor",
-		isotp: false
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "9A",
-		description: "Hybrid/EV sys. data, battery, voltage",
+		description: "Hybrid/EV sys. data",
 		name: "Hybrid_EV_System",
-		isotp: false
+		isotp: true,
+		bytes_returned: 6
 	},
 	{
 		service: "01",
 		pid: "9B",
 		description: "Diesel exhaust fluid sensor data",
-		name: "DieExhFluSenDat",
-		isotp: false
+		name: "DieselExhaustFluidSensorData",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "9C",
 		description: "O2 sensor data",
 		name: "O2SensorData",
-		isotp: false
+		isotp: true,
+		bytes_returned: 17
 	},
 	{
 		service: "01",
 		pid: "9D",
 		description: "Engine fuel rate",
 		name: "EngineFuelRate",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "9E",
 		description: "Engine exhaust flow rate",
-		name: "EngExhFloRat",
-		isotp: false
+		name: "EngineExhaustFlowRate",
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "9F",
 		description: "Fuel system percentage use",
-		name: "FueSysPerUse",
-		isotp: false
+		name: "FuelSystemPercentageUse",
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "A0",
 		description: "PIDs supported [A1 - C0]",
-		name: "PIDs_A1_C0",
-		isotp: false
+		name: "PIDsSupported_A1_C0",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "A1",
 		description: "NOx sensor corrected data",
-		name: "NOxSenCorDat",
-		isotp: false
+		name: "NOxSensorCorrectedData",
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "A2",
 		description: "Cylinder fuel rate",
 		name: "CylinderFuelRate",
-		isotp: false
+		isotp: false,
+		bytes_returned: 2
 	},
 	{
 		service: "01",
 		pid: "A3",
 		description: "Evap system vapor pressure",
-		name: "EvaSysVapPre",
-		isotp: false
+		name: "EvapSystemVaporPressure",
+		isotp: true,
+		bytes_returned: 9
 	},
 	{
 		service: "01",
 		pid: "A4",
 		description: "Transmission actual gear",
-		name: "TraActGea",
-		isotp: false
+		name: "TransmissionActualGear",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "A5",
 		description: "Cmd. diesel exhaust fluid dosing",
-		name: "ComDieExhFluDos",
-		isotp: false
+		name: "ComDieselExhaustFluidDosing",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "A6",
 		description: "Odometer",
 		name: "Odometer",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "A7",
-		description: "NOx concentration 3, 4",
+		description: "NOx concentration 3",
 		name: "NOxSensorConc3_4",
-		isotp: false
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "A8",
-		description: "NOx corrected concentration (3, 4)",
-		name: "NOxS_4",
-		isotp: false
+		description: "NOx sensor corrected concentration (sensors 3 & 4)",
+		name: "NOxSensorCorrectConc3_4",
+		isotp: false,
+		bytes_returned: 4
 	},
 	{
 		service: "01",
 		pid: "C0",
 		description: "PIDs supported [C1 - E0]",
-		name: "PIDs_C1_E0",
-		isotp: false
+		name: "PIDsSupported_C1_E0",
+		isotp: false,
+		bytes_returned: 4
+	},
+	{
+		service: "03",
+		pid: "AA",
+		description: "Show stored Diagnostic Trouble Codes (DTCs)",
+		name: "StoredDTCs",
+		isotp: true,
+		bytes_returned: 6
+	},
+	{
+		service: "09",
+		pid: "02",
+		description: "Vehicle Identification Number (VIN)",
+		name: "VIN",
+		isotp: true,
+		bytes_returned: 20
 	}
 ];
 
@@ -22000,15 +21917,33 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
     });
   };
   _proto.handleSettingChange = function handleSettingChange(setting, selectedOption) {
-    var _this$setState,
-      _this3 = this;
-    this.setState((_this$setState = {}, _this$setState[setting] = selectedOption.value, _this$setState), function () {
-      if (_this3.state.toolMode === "test") {
-        _this3.generateTestConfig();
-      } else if (_this3.getSelectedPids().length > 0) {
-        _this3.generateTransmitList();
-      }
-    });
+    var _this3 = this;
+    if (setting === "obdMode" && selectedOption.value === "WWH-OBD") {
+      this.setState(function (prevState) {
+        var _ref;
+        return _ref = {}, _ref[setting] = selectedOption.value, _ref.pids = prevState.pids.map(function (pid) {
+          var isObd2OnlyPid = pid.service === "03" && pid.pid === "AA" || pid.service === "09" && pid.pid === "02";
+          return isObd2OnlyPid ? _extends({}, pid, {
+            selected: false
+          }) : pid;
+        }), _ref;
+      }, function () {
+        if (_this3.state.toolMode === "test") {
+          _this3.generateTestConfig();
+        } else if (_this3.getSelectedPids().length > 0) {
+          _this3.generateTransmitList();
+        }
+      });
+    } else {
+      var _this$setState;
+      this.setState((_this$setState = {}, _this$setState[setting] = selectedOption.value, _this$setState), function () {
+        if (_this3.state.toolMode === "test") {
+          _this3.generateTestConfig();
+        } else if (_this3.getSelectedPids().length > 0) {
+          _this3.generateTransmitList();
+        }
+      });
+    }
   };
   _proto.generateTestConfig = function generateTestConfig() {
     var _this4 = this;
@@ -22079,20 +22014,29 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
       pids = _this$state2.pids,
       searchQuery = _this$state2.searchQuery,
       toolMode = _this$state2.toolMode,
-      supportedPids = _this$state2.supportedPids;
+      supportedPids = _this$state2.supportedPids,
+      obdMode = _this$state2.obdMode;
     var filtered = pids;
     if (toolMode === "supported" && supportedPids.length > 0) {
       var supportedSet = new Set(supportedPids);
       filtered = filtered.map(function (pid) {
+        var unsupported = !supportedSet.has(pid.pid);
+        var isObd2OnlyPid = pid.service === "03" && pid.pid === "AA" || pid.service === "09" && pid.pid === "02";
+        var obd2OnlyDisabled = isObd2OnlyPid && obdMode === "WWH-OBD";
         return _extends({}, pid, {
-          disabled: !supportedSet.has(pid.pid),
-          selected: supportedSet.has(pid.pid) ? pid.selected : false
+          disabled: unsupported || obd2OnlyDisabled,
+          selected: unsupported || obd2OnlyDisabled ? false : pid.selected,
+          displayDescription: pid.isotp ? pid.description + " (ISO TP)" : pid.description
         });
       });
     } else {
       filtered = filtered.map(function (pid) {
+        var isObd2OnlyPid = pid.service === "03" && pid.pid === "AA" || pid.service === "09" && pid.pid === "02";
+        var obd2OnlyDisabled = isObd2OnlyPid && obdMode === "WWH-OBD";
         return _extends({}, pid, {
-          disabled: false
+          disabled: obd2OnlyDisabled,
+          selected: obd2OnlyDisabled ? false : pid.selected,
+          displayDescription: pid.isotp ? pid.description + " (ISO TP)" : pid.description
         });
       });
     }
@@ -22145,8 +22089,8 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
     }
   };
   _proto.generateTransmitList = function generateTransmitList() {
-    var _this7 = this,
-      _generatedConfig;
+    var _generatedConfig,
+      _this7 = this;
     var _this$state3 = this.state,
       channel = _this$state3.channel,
       bitRate = _this$state3.bitRate,
@@ -22160,27 +22104,54 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
       });
       return;
     }
+    var isotpFlowControlOffset = 50;
     var maxOffset = (selectedPids.length - 1) * spacing;
     var period = maxOffset + spacing;
     var idFormat = canId === "7DF" ? 0 : 1;
-    var transmitList = selectedPids.map(function (pid, index) {
-      var delay = index * spacing;
-      var data = _this7.generateDataPayload(pid.pid, obdMode);
+    var transmitList = [];
+    var currentDelay = 0;
+    for (var _iterator = _createForOfIteratorHelperLoose(selectedPids), _step; !(_step = _iterator()).done;) {
+      var pid = _step.value;
       var namePrefix = canId === "7DF" ? "11" : "29";
       var modePrefix = obdMode === "OBD2" ? "OBD" : "OBDU";
-      return {
-        name: namePrefix + "_" + modePrefix + "_PID_" + pid.pid,
+      var isDtcPid = pid.service === "03" && pid.pid === "AA";
+      var data = isDtcPid ? "0103555555555555" : this.generateDataPayload(pid.pid, obdMode, pid.service);
+      var requestId = canId;
+      var flowControlId = canId === "7DF" ? "7E0" : "18DA00F1";
+      if (pid.isotp) {
+        requestId = canId === "7DF" ? "7E0" : "18DA00F1";
+      }
+      transmitList.push({
+        name: namePrefix + "_" + modePrefix + "_S" + parseInt(pid.service, 10) + "_" + pid.pid,
         state: 1,
         id_format: idFormat,
         frame_format: 0,
         brs: 0,
         log: 0,
         period: period,
-        delay: delay,
-        id: canId,
+        delay: currentDelay,
+        id: requestId,
         data: data
-      };
-    });
+      });
+      if (pid.isotp) {
+        currentDelay += isotpFlowControlOffset;
+        transmitList.push({
+          name: namePrefix + "_" + modePrefix + "_FC_S" + parseInt(pid.service, 10) + "_" + pid.pid,
+          state: 1,
+          id_format: idFormat,
+          frame_format: 0,
+          brs: 0,
+          log: 0,
+          period: period,
+          delay: currentDelay,
+          id: flowControlId,
+          data: "3000000000000000"
+        });
+        currentDelay += spacing - isotpFlowControlOffset;
+      } else {
+        currentDelay += spacing;
+      }
+    }
     var generatedConfig = (_generatedConfig = {}, _generatedConfig[channel] = {
       general: {
         rx_state: 1,
@@ -22202,10 +22173,11 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
       _this7.testMergedFile();
     });
   };
-  _proto.generateDataPayload = function generateDataPayload(pidHex, obdMode) {
+  _proto.generateDataPayload = function generateDataPayload(pidHex, obdMode, serviceHex) {
     var pid = pidHex.toUpperCase().padStart(2, '0');
+    var service = serviceHex.toUpperCase().padStart(2, '0');
     if (obdMode === "OBD2") {
-      return "0201" + pid + "5555555555";
+      return "02" + service + pid + "5555555555";
     } else {
       return "0322F4" + pid + "55555555";
     }
@@ -22585,18 +22557,18 @@ var OBDTool = /*#__PURE__*/function (_React$Component) {
         className: "binary-text-alt-2",
         style: {
           marginRight: "8px",
-          minWidth: "24px",
+          minWidth: "42px",
           flexShrink: 0
         }
-      }, pid.pid), /*#__PURE__*/React.createElement("span", {
+      }, "S", parseInt(pid.service, 10), " ", pid.pid), /*#__PURE__*/React.createElement("span", {
         style: {
           fontSize: "12px",
           whiteSpace: "nowrap",
           overflow: "hidden",
           textOverflow: "ellipsis"
         },
-        title: pid.description
-      }, pid.description));
+        title: pid.displayDescription || pid.description
+      }, pid.displayDescription || pid.description));
     }), filteredPids.length === 0 && /*#__PURE__*/React.createElement("div", {
       style: {
         padding: "10px",