conductor-node 14.24.0 → 14.24.2

package/src/resources/qbd/bills.ts

@@ -688,6 +688,10 @@ export namespace Bill {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemGroupLine.OverrideUnitOfMeasureSet | null;
 
@@ -872,6 +876,10 @@ export namespace Bill {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1066,6 +1074,10 @@ export namespace Bill {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1139,6 +1151,10 @@ export namespace Bill {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1257,6 +1273,10 @@ export namespace Bill {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1451,6 +1471,10 @@ export namespace Bill {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2188,15 +2212,16 @@ export namespace BillCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2300,15 +2325,16 @@ export namespace BillCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2680,6 +2706,10 @@ export namespace BillUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2803,6 +2833,10 @@ export namespace BillUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2950,6 +2984,10 @@ export namespace BillUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/checks.ts

@@ -725,6 +725,10 @@ export namespace Check {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemGroupLine.OverrideUnitOfMeasureSet | null;
 
@@ -909,6 +913,10 @@ export namespace Check {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1103,6 +1111,10 @@ export namespace Check {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1176,6 +1188,10 @@ export namespace Check {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1294,6 +1310,10 @@ export namespace Check {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1488,6 +1508,10 @@ export namespace Check {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2195,15 +2219,16 @@ export namespace CheckCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2307,15 +2332,16 @@ export namespace CheckCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2709,6 +2735,10 @@ export namespace CheckUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2832,6 +2862,10 @@ export namespace CheckUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2979,6 +3013,10 @@ export namespace CheckUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/credit-card-charges.ts

@@ -662,6 +662,10 @@ export namespace CreditCardCharge {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemGroupLine.OverrideUnitOfMeasureSet | null;
 
@@ -846,6 +850,10 @@ export namespace CreditCardCharge {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1040,6 +1048,10 @@ export namespace CreditCardCharge {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1113,6 +1125,10 @@ export namespace CreditCardCharge {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1231,6 +1247,10 @@ export namespace CreditCardCharge {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1425,6 +1445,10 @@ export namespace CreditCardCharge {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1951,15 +1975,16 @@ export namespace CreditCardChargeCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2063,15 +2088,16 @@ export namespace CreditCardChargeCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2354,6 +2380,10 @@ export namespace CreditCardChargeUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2477,6 +2507,10 @@ export namespace CreditCardChargeUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2624,6 +2658,10 @@ export namespace CreditCardChargeUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/credit-card-credits.ts

@@ -658,6 +658,10 @@ export namespace CreditCardCredit {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemGroupLine.OverrideUnitOfMeasureSet | null;
 
@@ -842,6 +846,10 @@ export namespace CreditCardCredit {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1036,6 +1044,10 @@ export namespace CreditCardCredit {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1109,6 +1121,10 @@ export namespace CreditCardCredit {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1227,6 +1243,10 @@ export namespace CreditCardCredit {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1421,6 +1441,10 @@ export namespace CreditCardCredit {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1947,15 +1971,16 @@ export namespace CreditCardCreditCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2059,15 +2084,16 @@ export namespace CreditCardCreditCreateParams {
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
      * use the field `itemId` on this line (QuickBooks will return an error) because
      * this field brings in all of the item information you need. You can, however,
-     * specify whatever `quantity`, `cost`, or `rate` that you want, or any other
-     * transaction line element other than `itemId`.
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2350,6 +2376,10 @@ export namespace CreditCardCreditUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2473,6 +2503,10 @@ export namespace CreditCardCreditUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2620,6 +2654,10 @@ export namespace CreditCardCreditUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/credit-memos.ts

@@ -678,6 +678,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: LineGroup.OverrideUnitOfMeasureSet | null;
 
@@ -878,6 +882,10 @@ export namespace CreditMemo {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1068,6 +1076,10 @@ export namespace CreditMemo {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1121,6 +1133,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1241,6 +1257,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1431,6 +1451,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2749,6 +2773,10 @@ export namespace CreditMemoUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2863,6 +2891,10 @@ export namespace CreditMemoUpdateParams {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -3026,6 +3058,10 @@ export namespace CreditMemoUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;