conductor-node 14.23.8 → 14.24.1

package/src/resources/qbd/credit-memos.ts

@@ -678,6 +678,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: LineGroup.OverrideUnitOfMeasureSet | null;
 
@@ -878,6 +882,10 @@ export namespace CreditMemo {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1068,6 +1076,10 @@ export namespace CreditMemo {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1121,6 +1133,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1241,6 +1257,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1431,6 +1451,10 @@ export namespace CreditMemo {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2749,6 +2773,10 @@ export namespace CreditMemoUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2863,6 +2891,10 @@ export namespace CreditMemoUpdateParams {
        * specific line. For example, you can sell an item typically measured in volume
        * units using weight units in a specific transaction by specifying a different
        * unit-of-measure set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -3026,6 +3058,10 @@ export namespace CreditMemoUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/estimates.ts

@@ -613,6 +613,10 @@ export namespace Estimate {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: LineGroup.OverrideUnitOfMeasureSet | null;
 
@@ -808,6 +812,10 @@ export namespace Estimate {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -985,6 +993,10 @@ export namespace Estimate {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1038,6 +1050,10 @@ export namespace Estimate {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1160,6 +1176,10 @@ export namespace Estimate {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1337,6 +1357,10 @@ export namespace Estimate {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2525,6 +2549,10 @@ export namespace EstimateUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2643,6 +2671,10 @@ export namespace EstimateUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2803,6 +2835,10 @@ export namespace EstimateUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/inventory-assembly-items.ts

@@ -346,6 +346,10 @@ export interface InventoryAssemblyItem {
   /**
    * The unit-of-measure set associated with this inventory assembly item, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSet: InventoryAssemblyItem.UnitOfMeasureSet | null;
 
@@ -605,6 +609,10 @@ export namespace InventoryAssemblyItem {
   /**
    * The unit-of-measure set associated with this inventory assembly item, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   export interface UnitOfMeasureSet {
     /**
@@ -797,6 +805,10 @@ export interface InventoryAssemblyItemCreateParams {
   /**
    * Body param: The unit-of-measure set associated with this inventory assembly
    * item, which consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }
@@ -1018,6 +1030,10 @@ export interface InventoryAssemblyItemUpdateParams {
   /**
    * Body param: The unit-of-measure set associated with this inventory assembly
    * item, which consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 

package/src/resources/qbd/inventory-items.ts

@@ -321,6 +321,10 @@ export interface InventoryItem {
   /**
    * The unit-of-measure set associated with this inventory item, which consists of a
    * base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSet: InventoryItem.UnitOfMeasureSet | null;
 
@@ -541,6 +545,10 @@ export namespace InventoryItem {
   /**
    * The unit-of-measure set associated with this inventory item, which consists of a
    * base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   export interface UnitOfMeasureSet {
     /**
@@ -726,6 +734,10 @@ export interface InventoryItemCreateParams {
   /**
    * Body param: The unit-of-measure set associated with this inventory item, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }
@@ -913,6 +925,10 @@ export interface InventoryItemUpdateParams {
   /**
    * Body param: The unit-of-measure set associated with this inventory item, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 

package/src/resources/qbd/invoices.ts

@@ -701,6 +701,10 @@ export namespace Invoice {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: LineGroup.OverrideUnitOfMeasureSet | null;
 
@@ -901,6 +905,10 @@ export namespace Invoice {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1090,6 +1098,10 @@ export namespace Invoice {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1143,6 +1155,10 @@ export namespace Invoice {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1263,6 +1279,10 @@ export namespace Invoice {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: Line.OverrideUnitOfMeasureSet | null;
 
@@ -1452,6 +1472,10 @@ export namespace Invoice {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2323,17 +2347,18 @@ export namespace InvoiceCreateParams {
      * be unlinked later.
      *
      * **IMPORTANT**: If you use `linkToTransactionLine` on this invoice line, you
-     * cannot use the field `item` on this line (QuickBooks will return an error)
+     * cannot use the field `itemId` on this line (QuickBooks will return an error)
      * because this field brings in all of the item information you need. You can,
      * however, specify whatever `quantity` or `rate` that you want, or any other
-     * transaction line element other than `item`.
+     * transaction line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this invoice line) and `linkToTransactionIds`
      * (on its parent transaction) in the same request as long as they do NOT link to
      * the same transaction (otherwise, QuickBooks will return an error). QuickBooks
      * will also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2483,17 +2508,18 @@ export namespace InvoiceCreateParams {
      * be unlinked later.
      *
      * **IMPORTANT**: If you use `linkToTransactionLine` on this invoice line, you
-     * cannot use the field `item` on this line (QuickBooks will return an error)
+     * cannot use the field `itemId` on this line (QuickBooks will return an error)
      * because this field brings in all of the item information you need. You can,
      * however, specify whatever `quantity` or `rate` that you want, or any other
-     * transaction line element other than `item`.
+     * transaction line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this invoice line) and `linkToTransactionIds`
      * (on its parent transaction) in the same request as long as they do NOT link to
      * the same transaction (otherwise, QuickBooks will return an error). QuickBooks
      * will also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2983,6 +3009,10 @@ export namespace InvoiceUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -3097,6 +3127,10 @@ export namespace InvoiceUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -3265,6 +3299,10 @@ export namespace InvoiceUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/item-groups.ts

@@ -187,6 +187,10 @@ export interface ItemGroup {
   /**
    * The unit-of-measure set associated with this item group, which consists of a
    * base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSet: ItemGroup.UnitOfMeasureSet | null;
 
@@ -289,6 +293,10 @@ export namespace ItemGroup {
   /**
    * The unit-of-measure set associated with this item group, which consists of a
    * base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   export interface UnitOfMeasureSet {
     /**
@@ -366,6 +374,10 @@ export interface ItemGroupCreateParams {
   /**
    * Body param: The unit-of-measure set associated with this item group, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }
@@ -503,6 +515,10 @@ export interface ItemGroupUpdateParams {
   /**
    * Body param: The unit-of-measure set associated with this item group, which
    * consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }

package/src/resources/qbd/item-receipts.ts

@@ -651,6 +651,10 @@ export namespace ItemReceipt {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemGroupLine.OverrideUnitOfMeasureSet | null;
 
@@ -835,6 +839,10 @@ export namespace ItemReceipt {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1029,6 +1037,10 @@ export namespace ItemReceipt {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       export interface OverrideUnitOfMeasureSet {
         /**
@@ -1102,6 +1114,10 @@ export namespace ItemReceipt {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -1220,6 +1236,10 @@ export namespace ItemReceipt {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSet: ItemLine.OverrideUnitOfMeasureSet | null;
 
@@ -1414,6 +1434,10 @@ export namespace ItemReceipt {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     export interface OverrideUnitOfMeasureSet {
       /**
@@ -2075,17 +2099,18 @@ export namespace ItemReceiptCreateParams {
      * unlinked later.
      *
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
-     * use the field `item` on this line (QuickBooks will return an error) because this
-     * field brings in all of the item information you need. You can, however, specify
-     * whatever `quantity` or `rate` that you want, or any other transaction line
-     * element other than `item`.
+     * use the field `itemId` on this line (QuickBooks will return an error) because
+     * this field brings in all of the item information you need. You can, however,
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2187,17 +2212,18 @@ export namespace ItemReceiptCreateParams {
      * unlinked later.
      *
      * **IMPORTANT**: If you use `linkToTransactionLine` on this item line, you cannot
-     * use the field `item` on this line (QuickBooks will return an error) because this
-     * field brings in all of the item information you need. You can, however, specify
-     * whatever `quantity` or `rate` that you want, or any other transaction line
-     * element other than `item`.
+     * use the field `itemId` on this line (QuickBooks will return an error) because
+     * this field brings in all of the item information you need. You can, however,
+     * specify whatever `quantity` or `cost` that you want, or any other transaction
+     * line element other than `itemId`.
      *
      * If the parent transaction supports the `linkToTransactionIds` field, you can use
      * both `linkToTransactionLine` (on this item line) and `linkToTransactionIds` (on
      * its parent transaction) in the same request as long as they do NOT link to the
      * same transaction (otherwise, QuickBooks will return an error). QuickBooks will
      * also return an error if you attempt to link a transaction that is empty or
-     * already closed.
+     * already closed, or if lines linking to the same transaction are not in that
+     * transaction's line order.
      *
      * **IMPORTANT**: By default, QuickBooks will not return any information about the
      * linked transaction line in this endpoint's response even when this request is
@@ -2482,6 +2508,10 @@ export namespace ItemReceiptUpdateParams {
      * specific line. For example, you can sell an item typically measured in volume
      * units using weight units in a specific transaction by specifying a different
      * unit-of-measure set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 
@@ -2605,6 +2635,10 @@ export namespace ItemReceiptUpdateParams {
        * line. For example, you can sell an item typically measured in volume units using
        * weight units in a specific transaction by specifying a different unit-of-measure
        * set with this field.
+       *
+       * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+       * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+       * the unit-of-measure sets list.
        */
       overrideUnitOfMeasureSetId?: string;
 
@@ -2752,6 +2786,10 @@ export namespace ItemReceiptUpdateParams {
      * line. For example, you can sell an item typically measured in volume units using
      * weight units in a specific transaction by specifying a different unit-of-measure
      * set with this field.
+     *
+     * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+     * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+     * the unit-of-measure sets list.
      */
     overrideUnitOfMeasureSetId?: string;
 

package/src/resources/qbd/non-inventory-items.ts

@@ -262,6 +262,10 @@ export interface NonInventoryItem {
   /**
    * The unit-of-measure set associated with this non-inventory item, which consists
    * of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSet: NonInventoryItem.UnitOfMeasureSet | null;
 
@@ -577,6 +581,10 @@ export namespace NonInventoryItem {
   /**
    * The unit-of-measure set associated with this non-inventory item, which consists
    * of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   export interface UnitOfMeasureSet {
     /**
@@ -696,6 +704,10 @@ export interface NonInventoryItemCreateParams {
   /**
    * Body param: The unit-of-measure set associated with this non-inventory item,
    * which consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }
@@ -935,6 +947,10 @@ export interface NonInventoryItemUpdateParams {
   /**
    * Body param: The unit-of-measure set associated with this non-inventory item,
    * which consists of a base unit and related units.
+   *
+   * IMPORTANT: Right after QuickBooks Desktop launches, it can briefly report an
+   * alternate `id` for a unit-of-measure set, so match on `fullName` when joining to
+   * the unit-of-measure sets list.
    */
   unitOfMeasureSetId?: string;
 }