codex-overleaf-link 2.5.0 → 2.5.1

package/extension/src/shared/i18n.js

@@ -12,6 +12,121 @@
 
   const MESSAGES = {
     en: {
+      failureReason_base_file_missing_at_start_user: "A file needed for this task was missing during the initial project read.",
+      failureReason_base_file_missing_at_start_next: "Refresh project context and rerun.",
+      failureReason_target_file_missing_path_user: "The change did not include a target file path.",
+      failureReason_target_file_missing_path_next: "Retry after regenerating the change; report a bug if repeated.",
+      failureReason_target_file_focus_lost_user: "Target file became active, then focus switched before the write landed.",
+      failureReason_target_file_focus_lost_next: "Avoid switching files during writeback and retry.",
+      failureReason_jump_target_not_resolved_user: "A line/position link could not map to an editor range.",
+      failureReason_jump_target_not_resolved_next: "Open the file manually and inspect the referenced line.",
+      failureReason_missing_base_file_user: "A write safety check needed a base file that is missing from the run snapshot.",
+      failureReason_missing_base_file_next: "Refresh project context and rerun.",
+      failureReason_patch_anchor_ambiguous_user: "The edit anchor matches multiple locations.",
+      failureReason_patch_anchor_ambiguous_next: "Narrow the request or select a smaller region.",
+      failureReason_delete_confirmation_missing_user: "A destructive delete was not confirmed.",
+      failureReason_delete_confirmation_missing_next: "Confirm the delete explicitly if intended.",
+      failureReason_binary_write_blocked_user: "Codex tried to write unsupported binary content.",
+      failureReason_binary_write_blocked_next: "Upload the file manually or attach a supported text file.",
+      failureReason_write_post_read_failed_user: "Codex could not read the file after writing.",
+      failureReason_write_post_read_failed_next: "Check Overleaf manually, then refresh and retry.",
+      failureReason_file_tree_verification_failed_user: "Create/delete/rename/move did not appear in the file tree as expected.",
+      failureReason_file_tree_verification_failed_next: "Inspect the file tree and retry if needed.",
+      failureReason_source_zip_unavailable_user: "The project could not be checked before uploading this file.",
+      failureReason_source_zip_unavailable_next: "Retry sync; only missing files will be uploaded.",
+      failureReason_file_upload_unconfirmed_user: "The file was submitted, but its saved content is not yet confirmed.",
+      failureReason_file_upload_unconfirmed_next: "Check the file before retrying; matching content will not be uploaded twice.",
+      failureReason_subagent_unfinished_output_user: "A subagent stopped before finishing this file; the main agent must review and adopt it.",
+      failureReason_subagent_unfinished_output_next: "Have the main agent complete and adopt the pending file.",
+      failureReason_subagent_unauthorized_edit_user: "A file changed outside the subagent ownership boundary and was not synced.",
+      failureReason_subagent_unauthorized_edit_next: "Review the ownership violation; it cannot be cleared through output adoption.",
+      failureReason_reviewing_enable_failed_user: "Codex could not enable Reviewing when it needed to.",
+      failureReason_reviewing_enable_failed_next: "Enable Reviewing manually or retry.",
+      failureReason_reviewing_disable_failed_user: "Codex could not switch to Editing / no-trace mode.",
+      failureReason_reviewing_disable_failed_next: "Switch to Editing manually, wait briefly, then retry.",
+      failureReason_tracked_changes_created_unexpectedly_user: "A replay intended to be untracked created Track Changes.",
+      failureReason_tracked_changes_created_unexpectedly_next: "Inspect Overleaf Reviewing and decide whether to accept or reject.",
+      failureReason_tracked_change_nodes_not_identified_user: "Codex wrote while Reviewing was enabled but cannot map generated tracked-change nodes.",
+      failureReason_tracked_change_nodes_not_identified_next: "Use Overleaf review tools manually; automatic tracked undo is disabled.",
+      failureReason_undo_preflight_content_drift_user: "Current content no longer matches this run's written content.",
+      failureReason_undo_preflight_content_drift_next: "Review manual edits; Codex did not undo to avoid removing them.",
+      failureReason_undo_reviewing_restore_unverified_user: "Undo completed but previous Reviewing state was not verified afterward.",
+      failureReason_undo_reviewing_restore_unverified_next: "Check Overleaf Reviewing/Editing mode manually.",
+      failureReason_accept_preflight_content_drift_user: "Content drifted from this run's writeback before accept.",
+      failureReason_accept_preflight_content_drift_next: "Retry Accept changes after reviewing current content.",
+      failureReason_accept_replay_created_tracked_changes_user: "Replay created tracked changes, so accept cannot be proven clean.",
+      failureReason_accept_replay_created_tracked_changes_next: "Review remaining tracked changes manually.",
+      failureReason_native_protocol_incompatible_user: "Native host version or capabilities do not match the extension.",
+      failureReason_native_protocol_incompatible_next: "Update the native host.",
+      failureReason_provider_revision_conflict_user: "The active model provider changed after this tab loaded it.",
+      failureReason_provider_revision_conflict_next: "Refresh the provider configuration and retry.",
+      failureReason_provider_not_found_user: "The active model provider no longer exists.",
+      failureReason_provider_not_found_next: "Select Built-in Codex or another provider.",
+      failureReason_provider_model_not_configured_user: "The selected model is not configured for the active provider.",
+      failureReason_provider_model_not_configured_next: "Add or select a model in Model Providers.",
+      failureReason_provider_protocol_unverified_user: "The provider API protocol has not been verified.",
+      failureReason_provider_protocol_unverified_next: "Run Test connection, save the provider, and retry.",
+      failureReason_provider_auth_rejected_user: "The provider rejected the configured API key.",
+      failureReason_provider_auth_rejected_next: "Replace the API key and test the connection.",
+      failureReason_provider_model_not_found_user: "The provider could not find the configured model.",
+      failureReason_provider_model_not_found_next: "Correct the model ID and test the connection.",
+      failureReason_provider_protocol_incompatible_user: "The endpoint is incompatible with the selected API protocol.",
+      failureReason_provider_protocol_incompatible_next: "Select another protocol or use Auto detection.",
+      failureReason_provider_request_rejected_user: "The provider rejected the protocol probe request.",
+      failureReason_provider_request_rejected_next: "Review the model ID, reasoning controls, tool support, and request overrides.",
+      failureReason_provider_rate_limited_user: "The provider rate limit was reached.",
+      failureReason_provider_rate_limited_next: "Wait for the rate-limit window to recover and retry.",
+      failureReason_provider_connection_timeout_user: "The provider connection timed out.",
+      failureReason_provider_connection_timeout_next: "Check the endpoint and network, then retry.",
+      failureReason_provider_dns_failed_user: "The provider hostname could not be resolved.",
+      failureReason_provider_dns_failed_next: "Check the Base URL and DNS, then retry.",
+      failureReason_provider_tls_failed_user: "TLS verification failed for the provider endpoint.",
+      failureReason_provider_tls_failed_next: "Check the endpoint certificate and Base URL.",
+      failureReason_provider_response_invalid_user: "The provider returned an incompatible or invalid response.",
+      failureReason_provider_response_invalid_next: "Test the connection and verify protocol compatibility.",
+      failureReason_provider_store_unavailable_user: "The Native Host could not access provider configuration storage.",
+      failureReason_provider_store_unavailable_next: "Check local permissions and Native Host status.",
+      failureReason_provider_store_corrupt_user: "The provider configuration store is corrupt or inconsistent.",
+      failureReason_provider_store_corrupt_next: "Repair or rebuild the local provider configuration.",
+      failureReason_codex_result_parse_failed_user: "Codex output could not be parsed into operations.",
+      failureReason_codex_result_parse_failed_next: "Retry with a simpler request; report if repeated.",
+      failureReason_run_state_persist_failed_user: "Current run state could not be saved.",
+      failureReason_run_state_persist_failed_next: "Continue carefully; refresh may lose this run's recovery state.",
+      failureReason_receipt_persist_failed_user: "Writeback receipt could not be saved.",
+      failureReason_receipt_persist_failed_next: "Export/copy Technical Details before refreshing.",
+      deleteSessionNativeFailureDetail: "The local bridge did not confirm success.",
+      failureReason_missing_tracked_changes_user: "No matching Overleaf tracked-change records were found for this run. Codex did not undo with text patches.",
+      failureReason_tracked_change_file_open_failed_user: "Could not open the file to find this run's tracked changes. Check it in the Overleaf review panel.",
+      failureReason_tracked_change_reject_control_not_found_user: "Some tracked changes remain, but the matching Reject button was not found. Check them in the Overleaf review panel.",
+      failureReason_tracked_change_reject_not_confirmed_user: "Codex clicked Reject, but Overleaf still shows this tracked change. Check it in the Overleaf review panel.",
+      failureReason_tracked_change_accept_control_not_found_user: "Some tracked changes remain, but the matching Accept button was not found. Check them in the Overleaf review panel.",
+      failureReason_tracked_change_accept_not_confirmed_user: "Codex clicked Accept, but Overleaf still shows this tracked change. Check it in the Overleaf review panel.",
+      failureReason_tracked_change_editor_undo_open_failed_user: "Could not open the file for Overleaf native Undo.",
+      failureReason_tracked_change_editor_undo_current_mismatch_user: "The current content no longer matches this run's written content. Codex stopped native Undo to preserve later edits.",
+      failureReason_editor_undo_control_not_found_user: "Could not find Overleaf's editor Undo button to undo this run.",
+      failureReason_editor_undo_no_progress_user: "Codex clicked Overleaf Undo, but the file did not change.",
+      failureReason_editor_undo_max_iterations_user: "The file did not return to its pre-run content after repeated native Undo steps. Codex stopped to avoid undoing other edits.",
+      failureReason_tracked_change_undo_max_iterations_user: "Tracked changes are still left. Codex stopped to avoid rejecting unrelated edits.",
+      failureReason_tracked_change_undo_verify_open_failed_user: "Could not open the file after Undo to verify its content. Reload Overleaf and check it.",
+      failureReason_tracked_change_undo_verify_failed_user: "The file did not return to its pre-run content after rejecting tracked changes. Check this run's changes in the Overleaf review panel.",
+      failureReason_accept_missing_run_content_user: "The pre-write or post-write content is unavailable. Codex did not replay or accept the tracked changes.",
+      failureReason_accept_editor_undo_unavailable_user: "Native Undo and a safe checkpoint rollback are unavailable. Codex did not accept this run.",
+      failureReason_accept_editing_not_confirmed_user: "Codex could not confirm Overleaf Editing mode. It stopped replaying this run to avoid creating new tracked changes.",
+      failureReason_accept_editing_not_stable_user: "Overleaf Editing mode did not remain stable long enough for an untracked Accept replay. Codex did not replay this write.",
+      failureReason_accept_replay_rollback_missing_content_user: "Accept created fresh tracked changes, but rollback could not run because the pre-write or post-write content was unavailable.",
+      failureReason_review_scope_unavailable_user: "The native tracked-change scope could not be safely isolated. No review mutation was attempted. Check the changes individually in Overleaf Review.",
+      failureReason_native_untracked_undo_pending_changes_user: "This file has unresolved tracked changes. Undo without track changes was stopped to preserve them; no document changes were made.",
+      failureReason_native_untracked_undo_pending_changes_next: "Resolve the pending changes in Overleaf Review, then retry Undo. Switching to Editing does not clear existing tracked changes.",
+      failureReason_review_request_unverified_user: "The native review request could not be fully verified; some target changes may already be accepted. No text replay was attempted. Check Overleaf Review before retrying.",
+      failureReason_review_owner_disconnected_user: "The Undo owner disconnected; no further review writes were started.",
+      failureReason_review_deadline_exceeded_user: "The review time budget expired; no further review writes were started.",
+      failureReason_review_cancelled_user: "The review was cancelled; no further review writes were started.",
+      failureReason_review_project_changed_user: "The original review project is no longer active.",
+      failureReason_review_detail_next: "Check the remaining changes and run details in Overleaf before continuing.",
+      queuedInputGuideNotReady: "The active Codex turn is not ready for guidance.",
+      queuedInputGuideTurnChanged: "The active Codex turn changed before the guidance was delivered.",
+      queuedInputGuideEmpty: "Guidance input is empty.",
+      queuedInputGuideTooLarge: "Guidance input exceeds the 12000 character limit.",
       resizePanel: 'Drag to resize the Codex panel. Double click to reset.',
       codexActions: 'Codex actions',
       refreshProbe: 'Refresh current file status. This will not sync or modify files.',
@@ -242,6 +357,14 @@
       sensitiveConfirmMessage: 'Codex found possible sensitive content. Raw detected secrets are not shown here. Continue only if this project context may be sent to Codex.',
       sensitiveConfirmRun: 'Run anyway',
       localSkillsTitle: 'Skills',
+      skillsManageEntry: 'Manage skills',
+      codexLocalSkillsTitle: 'Local Codex skills',
+      codexLocalSkillsEmpty: 'No local Codex skills found.',
+      codexLocalSkillsSkipped: '{count} local skills could not be loaded.',
+      codexLocalSkillsLoadFailed: 'Could not load local Codex skills. Open Skills again to retry.',
+      codexLocalSkillsDisabled: 'Local Codex skills are disabled for runs.',
+      slashUseLocalSkillSubtitle: 'Local Codex · Use for this turn',
+      slashUseOverleafSkillSubtitle: 'Codex Overleaf · Use for this turn',
       codexOverleafSkillsEmpty: 'No Codex Overleaf skills installed.',
       codexOverleafSkillsDisabled: 'Codex Overleaf skills are disabled for runs.',
       loadCodexLocalSkills: 'Load local Codex skills',
@@ -287,7 +410,7 @@
       settingsWorkbenchOpenProject: 'Open a project to configure its settings.',
       settingsWorkbenchClose: 'Close settings',
       settingsWorkbenchEnableSkills: 'Enable Overleaf skills',
-      settingsWorkbenchSkillsHelp: 'Turn off all skills without changing individual selections.',
+      settingsWorkbenchSkillsHelp: 'Turn off Overleaf skills without changing individual selections.',
       settingsWorkbenchSkillsList: 'Available skills',
       settingsWorkbenchProviderOpenFailed: 'Could not open provider settings.',
       themeLabel: 'Theme',
@@ -478,6 +601,12 @@
       // Each entry follows the §9 catalog copy. {file} / {activeFile} interpolate from the failure record.
       failureReason_partial_write_needs_review_user: 'Some operations wrote to Overleaf; others were skipped.',
       failureReason_partial_write_needs_review_next: 'Review the written files; use "Undo written parts" to roll back if needed.',
+      failureReason_file_plan_confirmation_rejected_user: 'The complete file plan was cancelled; no part was applied.',
+      failureReason_file_plan_confirmation_rejected_next: 'Review the intended changes and start a new run if you want to apply them.',
+      failureReason_file_tree_controls_unavailable_user: 'Codex could not safely perform this file operation with the available Overleaf controls.',
+      failureReason_file_tree_controls_unavailable_next: 'Check the file operation in Overleaf before starting a new task.',
+      failureReason_delete_confirmation_rejected_user: 'The deletion was cancelled and was not applied. Other allowed changes in this run may still proceed.',
+      failureReason_delete_confirmation_rejected_next: 'Review the other changes. If deletion is still intended, request it in a new task.',
       failureReason_codex_run_cancelled_user: 'The local Codex run was cancelled.',
       failureReason_codex_run_cancelled_next: 'Start a new run when you are ready.',
       failureReason_write_operation_failed_user: 'The editor write call for {file} failed.',
@@ -486,6 +615,13 @@
       failureReason_write_timeout_next: 'Refresh Overleaf, then retry.',
       failureReason_undo_operation_failed_user: 'The Overleaf undo or reject operation failed.',
       failureReason_undo_operation_failed_next: 'Use Overleaf undo/review tools manually.',
+      failureReason_tracked_change_not_found_user: 'No matching tracked changes were found on the Overleaf page for this run. Codex did not undo with text patches.',
+      failureReason_snapshot_undo_current_mismatch_user: 'The current content or document identity does not match this run\'s undo checkpoint. Codex stopped Undo and kept the recovery data.',
+      failureReason_snapshot_undo_current_mismatch_next: 'Inspect the file and any later edits before trying Undo again.',
+      failureReason_snapshot_undo_open_failed_user: 'Codex could not open the file to restore its saved checkpoint.',
+      failureReason_snapshot_undo_open_failed_next: 'Open the file in Overleaf, wait for it to load, then retry Undo.',
+      failureReason_snapshot_undo_unavailable_user: 'The saved checkpoint is unavailable for this Undo. Codex kept the remaining recovery data.',
+      failureReason_snapshot_undo_unavailable_next: 'Inspect the file and the run details before continuing.',
       failureReason_undo_partial_user: "Some of this run's writes were undone; others were skipped.",
       failureReason_undo_partial_next: 'Review the remaining files and retry undo if it is safe.',
       failureReason_accept_force_editing_failed_user: 'Codex could not enter a stable Editing mode to accept the changes.',
@@ -498,6 +634,14 @@
       failureReason_project_snapshot_unavailable_next: 'Refresh Overleaf, then rerun the task.',
       failureReason_selected_context_unresolved_user: 'Codex could not resolve the requested selection or context.',
       failureReason_selected_context_unresolved_next: 'Select the target again or specify the file/section explicitly.',
+      failureReason_selection_scope_violation_user: 'A generated change exceeded the attached selection and was blocked.',
+      failureReason_selection_scope_violation_next: 'Select the intended region again and request only changes within it. Valid written parts can be undone.',
+      failureReason_governance_blocked_user: 'Project file rules blocked this write. Codex did not write the affected path.',
+      failureReason_governance_blocked_next: 'Review the project file rules in Settings > Protection & privacy, then request changes within the allowed paths.',
+      failureReason_governance_readonly_user: 'Project file rules marked a path in this operation read-only. Codex did not apply this operation.',
+      failureReason_governance_readonly_next: 'Review the read-only paths in Settings > Protection & privacy, then request changes within the allowed paths.',
+      failureReason_governance_writable_allowlist_user: 'A path in this operation is outside the configured writable paths. Codex did not apply this operation.',
+      failureReason_governance_writable_allowlist_next: 'Review the writable paths in Settings > Protection & privacy, then request changes within those paths.',
       failureReason_target_file_not_found_user: 'Codex could not find {file} in this Overleaf project.',
       failureReason_target_file_not_found_next: 'Check the file name/path in Overleaf and retry.',
       failureReason_target_file_open_failed_user: 'Codex could not open {file} in Overleaf.',
@@ -532,6 +676,10 @@
       failureReason_codex_timeout_next: 'Check whether local Codex is still running. If there is no progress, cancel and retry with smaller @context.',
       failureReason_codex_output_limit_user: 'Local Codex output was too large, so the bridge stopped reading.',
       failureReason_codex_output_limit_next: 'Retry with smaller @context, or open Technical Details to inspect the output limit.',
+      failureReason_codex_local_skill_unavailable_user: 'The selected local Codex skill is unavailable or disabled. This run did not start.',
+      failureReason_codex_local_skill_unavailable_next: 'Open Skills, select an available enabled skill, and submit again.',
+      failureReason_codex_local_skills_failed_user: 'Local Codex skills could not be loaded. This run did not start.',
+      failureReason_codex_local_skills_failed_next: 'Open Skills to reload the local catalog, then submit again.',
       failureReason_codex_not_found_user: 'Codex CLI was not found on this machine.',
       failureReason_codex_not_found_next: 'Confirm `codex` works in Terminal, then reinstall the native host or reload the extension.',
       failureReason_storage_quota_exceeded_user: 'Browser storage quota was exceeded.',
@@ -613,6 +761,121 @@
       recentProjects_badge_abandoned_after_navigation: 'Last run stopped after navigation'
     },
     zh: {
+      failureReason_base_file_missing_at_start_user: "首次读取项目时，缺少本任务所需的文件。",
+      failureReason_base_file_missing_at_start_next: "请刷新项目上下文后重新运行。",
+      failureReason_target_file_missing_path_user: "改动中未包含目标文件路径。",
+      failureReason_target_file_missing_path_next: "请重新生成改动后重试；若再次发生，请报告此问题。",
+      failureReason_target_file_focus_lost_user: "目标文件曾处于活动状态，但写入前焦点切换到了其他文件。",
+      failureReason_target_file_focus_lost_next: "写回期间请保持当前文件不变，然后重试。",
+      failureReason_jump_target_not_resolved_user: "无法将行号或位置链接对应到编辑器中的文本范围。",
+      failureReason_jump_target_not_resolved_next: "请手动打开文件，检查所引用的行。",
+      failureReason_missing_base_file_user: "写入安全检查所需的基准文件未包含在本轮快照中。",
+      failureReason_missing_base_file_next: "请刷新项目上下文后重新运行。",
+      failureReason_patch_anchor_ambiguous_user: "修改位置的定位文本匹配到了多处内容。",
+      failureReason_patch_anchor_ambiguous_next: "请缩小请求范围，或选择更小的文本区域。",
+      failureReason_delete_confirmation_missing_user: "删除操作尚未得到确认。",
+      failureReason_delete_confirmation_missing_next: "如果确实需要删除，请明确确认该操作。",
+      failureReason_binary_write_blocked_user: "Codex 尝试写入尚不支持的二进制内容。",
+      failureReason_binary_write_blocked_next: "请手动上传文件，或附上受支持的文本文件。",
+      failureReason_write_post_read_failed_user: "写入后，Codex 无法读取该文件。",
+      failureReason_write_post_read_failed_next: "请先在 Overleaf 检查文件，再刷新并重试。",
+      failureReason_file_tree_verification_failed_user: "新建、删除、重命名或移动的结果未按预期出现在文件树中。",
+      failureReason_file_tree_verification_failed_next: "请检查文件树，必要时再重试。",
+      failureReason_source_zip_unavailable_user: "上传此文件前，无法完成项目检查。",
+      failureReason_source_zip_unavailable_next: "请重试同步；仅会上传缺失的文件。",
+      failureReason_file_upload_unconfirmed_user: "文件已提交，但尚未确认其保存后的内容。",
+      failureReason_file_upload_unconfirmed_next: "重试前请检查文件；内容一致的文件不会重复上传。",
+      failureReason_subagent_unfinished_output_user: "子代理在完成此文件前已停止；主代理需要审阅并采纳该文件。",
+      failureReason_subagent_unfinished_output_next: "请由主代理完成并采纳待处理文件。",
+      failureReason_subagent_unauthorized_edit_user: "文件修改超出了子代理负责的范围，因此未同步。",
+      failureReason_subagent_unauthorized_edit_next: "请检查超出负责范围的修改；采纳输出无法解除此限制。",
+      failureReason_reviewing_enable_failed_user: "Codex 无法在需要时启用审阅模式。",
+      failureReason_reviewing_enable_failed_next: "请手动启用审阅模式，或重试。",
+      failureReason_reviewing_disable_failed_user: "Codex 无法切换到不留痕的编辑模式。",
+      failureReason_reviewing_disable_failed_next: "请手动切换到编辑模式，稍候再重试。",
+      failureReason_tracked_changes_created_unexpectedly_user: "原本应当不留痕的重放产生了留痕改动。",
+      failureReason_tracked_changes_created_unexpectedly_next: "请在 Overleaf 审阅面板检查，并决定接受或拒绝。",
+      failureReason_tracked_change_nodes_not_identified_user: "Codex 在审阅模式下完成了写入，但无法识别所生成的留痕记录。",
+      failureReason_tracked_change_nodes_not_identified_next: "请手动使用 Overleaf 审阅工具；自动留痕撤销当前不可用。",
+      failureReason_undo_preflight_content_drift_user: "当前内容已与本轮写入后的内容不一致。",
+      failureReason_undo_preflight_content_drift_next: "请检查后续手动编辑；Codex 未执行撤销，以免删除这些编辑。",
+      failureReason_undo_reviewing_restore_unverified_user: "撤销已完成，但未能确认原来的审阅状态已恢复。",
+      failureReason_undo_reviewing_restore_unverified_next: "请手动检查 Overleaf 的审阅或编辑模式。",
+      failureReason_accept_preflight_content_drift_user: "接受改动前，内容已偏离本轮写回的结果。",
+      failureReason_accept_preflight_content_drift_next: "请检查当前内容后，再重试接受改动。",
+      failureReason_accept_replay_created_tracked_changes_user: "重放产生了留痕改动，无法确认接受操作已无留痕地完成。",
+      failureReason_accept_replay_created_tracked_changes_next: "请手动检查剩余的留痕改动。",
+      failureReason_native_protocol_incompatible_user: "本地主机的版本或能力与扩展不匹配。",
+      failureReason_native_protocol_incompatible_next: "请更新本地主机。",
+      failureReason_provider_revision_conflict_user: "本标签页加载配置后，当前模型服务的配置已发生变化。",
+      failureReason_provider_revision_conflict_next: "请刷新模型服务配置后重试。",
+      failureReason_provider_not_found_user: "当前模型服务已不存在。",
+      failureReason_provider_not_found_next: "请选择内置 Codex 或其他模型服务。",
+      failureReason_provider_model_not_configured_user: "当前模型服务中未配置所选模型。",
+      failureReason_provider_model_not_configured_next: "请在模型服务设置中添加或选择模型。",
+      failureReason_provider_protocol_unverified_user: "模型服务的 API 协议尚未验证。",
+      failureReason_provider_protocol_unverified_next: "请测试连接并保存模型服务配置，然后重试。",
+      failureReason_provider_auth_rejected_user: "模型服务拒绝了所配置的 API 密钥。",
+      failureReason_provider_auth_rejected_next: "请更换 API 密钥并测试连接。",
+      failureReason_provider_model_not_found_user: "模型服务找不到所配置的模型。",
+      failureReason_provider_model_not_found_next: "请修正模型标识并测试连接。",
+      failureReason_provider_protocol_incompatible_user: "服务端点与所选 API 协议不兼容。",
+      failureReason_provider_protocol_incompatible_next: "请选择其他协议，或使用自动检测。",
+      failureReason_provider_request_rejected_user: "模型服务拒绝了协议探测请求。",
+      failureReason_provider_request_rejected_next: "请检查模型标识、推理设置、工具支持及自定义请求参数。",
+      failureReason_provider_rate_limited_user: "模型服务已达到请求频率限制。",
+      failureReason_provider_rate_limited_next: "请等待限流窗口恢复后重试。",
+      failureReason_provider_connection_timeout_user: "模型服务连接超时。",
+      failureReason_provider_connection_timeout_next: "请检查服务端点和网络，然后重试。",
+      failureReason_provider_dns_failed_user: "无法解析模型服务的主机名。",
+      failureReason_provider_dns_failed_next: "请检查基础 URL 和 DNS，然后重试。",
+      failureReason_provider_tls_failed_user: "模型服务端点的 TLS 验证失败。",
+      failureReason_provider_tls_failed_next: "请检查端点证书和基础 URL。",
+      failureReason_provider_response_invalid_user: "模型服务返回了不兼容或无效的响应。",
+      failureReason_provider_response_invalid_next: "请测试连接并确认协议兼容性。",
+      failureReason_provider_store_unavailable_user: "本地主机无法访问模型服务配置存储。",
+      failureReason_provider_store_unavailable_next: "请检查本地权限和本地主机状态。",
+      failureReason_provider_store_corrupt_user: "模型服务配置存储已损坏或不一致。",
+      failureReason_provider_store_corrupt_next: "请修复或重建本地模型服务配置。",
+      failureReason_codex_result_parse_failed_user: "无法将 Codex 输出解析为操作。",
+      failureReason_codex_result_parse_failed_next: "请使用更简单的请求重试；若再次发生，请报告此问题。",
+      failureReason_run_state_persist_failed_user: "无法保存当前运行状态。",
+      failureReason_run_state_persist_failed_next: "请谨慎继续；刷新可能导致本轮恢复状态丢失。",
+      failureReason_receipt_persist_failed_user: "无法保存写回回执。",
+      failureReason_receipt_persist_failed_next: "刷新前请导出或复制技术详情。",
+      deleteSessionNativeFailureDetail: "本地桥接程序未确认操作成功。",
+      failureReason_missing_tracked_changes_user: "这轮写入没有可识别的 Overleaf 留痕记录；Codex 没有执行文本补丁撤销。",
+      failureReason_tracked_change_file_open_failed_user: "无法打开文件来查找这轮写入的留痕记录；请在 Overleaf 审阅面板检查。",
+      failureReason_tracked_change_reject_control_not_found_user: "仍有留痕记录未处理，但未找到对应的拒绝按钮；请在 Overleaf 审阅面板检查。",
+      failureReason_tracked_change_reject_not_confirmed_user: "Codex 已点击拒绝，但 Overleaf 仍显示该留痕记录；请在审阅面板检查。",
+      failureReason_tracked_change_accept_control_not_found_user: "仍有留痕记录未处理，但未找到对应的接受按钮；请在 Overleaf 审阅面板检查。",
+      failureReason_tracked_change_accept_not_confirmed_user: "Codex 已点击接受，但 Overleaf 仍显示该留痕记录；请在审阅面板检查。",
+      failureReason_tracked_change_editor_undo_open_failed_user: "无法打开文件来执行 Overleaf 原生撤销。",
+      failureReason_tracked_change_editor_undo_current_mismatch_user: "当前内容与本轮写入后的内容不一致；Codex 已停止原生撤销，以保留后续编辑。",
+      failureReason_editor_undo_control_not_found_user: "未找到 Overleaf 编辑器的撤销按钮，无法撤销本轮改动。",
+      failureReason_editor_undo_no_progress_user: "Codex 已点击 Overleaf 撤销，但文件内容没有变化。",
+      failureReason_editor_undo_max_iterations_user: "经过多次原生撤销后，文件仍未恢复到本轮写入前的内容；Codex 已停止，以免撤销其他编辑。",
+      failureReason_tracked_change_undo_max_iterations_user: "仍有未处理的留痕记录；Codex 已停止，以免误拒绝其他编辑。",
+      failureReason_tracked_change_undo_verify_open_failed_user: "撤销后无法打开文件验证内容；请刷新 Overleaf 后检查。",
+      failureReason_tracked_change_undo_verify_failed_user: "拒绝留痕后，文件内容仍未恢复到写入前状态；请在 Overleaf 审阅面板检查本轮修改。",
+      failureReason_accept_missing_run_content_user: "缺少写入前或写入后的内容；Codex 未重放或接受留痕改动。",
+      failureReason_accept_editor_undo_unavailable_user: "原生撤销及安全的检查点回滚均不可用；Codex 未接受本轮改动。",
+      failureReason_accept_editing_not_confirmed_user: "无法确认 Overleaf 已进入编辑模式；Codex 已停止重放本轮改动，以免产生新的留痕。",
+      failureReason_accept_editing_not_stable_user: "Overleaf 编辑模式未保持稳定，无法无留痕地重放接受的改动；Codex 未重放此次写入。",
+      failureReason_accept_replay_rollback_missing_content_user: "接受改动时产生了新的留痕，但缺少写入前或写入后的内容，无法回滚。",
+      failureReason_review_scope_unavailable_user: "无法安全确认本轮原生留痕的范围；尚未尝试审阅写入。请在 Overleaf 审阅面板逐项检查。",
+      failureReason_native_untracked_undo_pending_changes_user: "此文件仍有未处理的留痕改动。为保留这些改动，本次无留痕撤销已停止，文档未改动。",
+      failureReason_native_untracked_undo_pending_changes_next: "请先在 Overleaf 审阅面板处理现有留痕，再重试撤销。切换到编辑模式不会清除已有留痕。",
+      failureReason_review_request_unverified_user: "原生审阅请求未能完全核实，部分目标改动可能已接受；未尝试文本重放。请先在 Overleaf 审阅面板检查，再决定是否重试。",
+      failureReason_review_owner_disconnected_user: "撤销操作的连接已断开；未再启动后续审阅写入。",
+      failureReason_review_deadline_exceeded_user: "审阅操作已超时；未再启动后续审阅写入。",
+      failureReason_review_cancelled_user: "审阅操作已取消；未再启动后续审阅写入。",
+      failureReason_review_project_changed_user: "原审阅项目已不再处于活动状态。",
+      failureReason_review_detail_next: "继续操作前，请在 Overleaf 检查剩余改动及运行详情。",
+      queuedInputGuideNotReady: "当前 Codex 轮次尚未准备好接收指导。",
+      queuedInputGuideTurnChanged: "指导送达前，当前 Codex 轮次已发生变化。",
+      queuedInputGuideEmpty: "指导内容为空。",
+      queuedInputGuideTooLarge: "指导内容超过 12000 字符上限。",
       resizePanel: '拖动调整 Codex 面板宽度，双击恢复默认宽度',
       codexActions: 'Codex 操作',
       refreshProbe: '重新检测当前文件状态；不会同步或修改文件',
@@ -843,6 +1106,14 @@
       sensitiveConfirmMessage: 'Codex 发现了可能的敏感内容。这里不会显示原始密钥或秘密值。只有在确认可以把这些项目上下文发送给 Codex 时才继续。',
       sensitiveConfirmRun: '仍然运行',
       localSkillsTitle: '技能',
+      skillsManageEntry: '管理技能',
+      codexLocalSkillsTitle: 'Codex 本地技能',
+      codexLocalSkillsEmpty: '没有找到 Codex 本地技能。',
+      codexLocalSkillsSkipped: '有 {count} 个本地技能未能加载。',
+      codexLocalSkillsLoadFailed: '无法加载 Codex 本地技能，请重新打开技能页重试。',
+      codexLocalSkillsDisabled: '运行时已禁用 Codex 本地技能。',
+      slashUseLocalSkillSubtitle: 'Codex 本地 · 本轮使用',
+      slashUseOverleafSkillSubtitle: 'Codex Overleaf · 本轮使用',
       codexOverleafSkillsEmpty: '没有安装 Codex Overleaf 专属技能。',
       codexOverleafSkillsDisabled: '运行时已禁用 Codex Overleaf 专属技能。',
       loadCodexLocalSkills: '加载 Codex 本地技能',
@@ -888,7 +1159,7 @@
       settingsWorkbenchOpenProject: '进入项目后可配置项目设置。',
       settingsWorkbenchClose: '关闭设置',
       settingsWorkbenchEnableSkills: '启用 Overleaf 技能',
-      settingsWorkbenchSkillsHelp: '关闭总开关时，各技能的单独选择会保留。',
+      settingsWorkbenchSkillsHelp: '关闭 Overleaf 技能时，各项选择会保留。',
       settingsWorkbenchSkillsList: '可用技能',
       settingsWorkbenchProviderOpenFailed: '无法打开模型服务设置。',
       themeLabel: '主题',
@@ -1078,6 +1349,8 @@
       // FailureReason 高优先级双语文案（设计规格 §15.4）。文案对应 §9 目录的英文 fallback。
       failureReason_partial_write_needs_review_user: '部分操作已写入 Overleaf，其余被跳过。',
       failureReason_partial_write_needs_review_next: '请检查已写入的文件；如需回滚，使用「撤销已写入部分」。',
+      failureReason_file_plan_confirmation_rejected_user: '整份文件计划已取消，未应用任何部分。',
+      failureReason_file_plan_confirmation_rejected_next: '请先审阅预期改动；需要应用时重新发起一轮任务。',
       failureReason_codex_run_cancelled_user: '本地 Codex 任务已取消。',
       failureReason_codex_run_cancelled_next: '准备好后可以重新发起一轮任务。',
       failureReason_write_operation_failed_user: '对 {file} 的编辑器写入调用失败。',
@@ -1085,7 +1358,18 @@
       failureReason_write_timeout_user: 'Overleaf 在超时前没有接受对 {file} 的写入。',
       failureReason_write_timeout_next: '刷新 Overleaf 后重试。',
       failureReason_undo_operation_failed_user: 'Overleaf 的撤销或拒绝操作失败。',
+      failureReason_file_tree_controls_unavailable_user: 'Codex 无法通过当前可用的 Overleaf 控件安全执行此文件操作。',
+      failureReason_file_tree_controls_unavailable_next: '请先在 Overleaf 中检查文件操作，再开始新任务。',
+      failureReason_delete_confirmation_rejected_user: '删除已取消，未执行该删除；本轮其他获准改动仍可能继续。',
+      failureReason_delete_confirmation_rejected_next: '请检查其他改动；若仍需删除，请在新任务中提出。',
       failureReason_undo_operation_failed_next: '请手动使用 Overleaf 的撤销/审阅工具。',
+      failureReason_tracked_change_not_found_user: '没有在 Overleaf 页面里找到这轮写入对应的留痕记录；Codex 没有用文本补丁伪撤销。',
+      failureReason_snapshot_undo_current_mismatch_user: '当前内容或文档身份与本轮撤销检查点不一致；Codex 已停止撤销并保留恢复材料。',
+      failureReason_snapshot_undo_current_mismatch_next: '请先检查文件及后续编辑，再决定是否重试撤销。',
+      failureReason_snapshot_undo_open_failed_user: 'Codex 无法打开文件来恢复已保存的检查点。',
+      failureReason_snapshot_undo_open_failed_next: '请在 Overleaf 中打开文件，等待加载完成后再重试撤销。',
+      failureReason_snapshot_undo_unavailable_user: '本次撤销所需的检查点不可用；Codex 已保留剩余恢复材料。',
+      failureReason_snapshot_undo_unavailable_next: '请先检查文件和本轮运行详情，再继续操作。',
       failureReason_undo_partial_user: '本轮的部分写入已撤销，其余被跳过。',
       failureReason_undo_partial_next: '检查剩余文件，确认安全后再重试撤销。',
       failureReason_accept_force_editing_failed_user: 'Codex 未能进入稳定的 Editing 模式来接受改动。',
@@ -1098,6 +1382,14 @@
       failureReason_project_snapshot_unavailable_next: '请刷新 Overleaf，然后重试本轮任务。',
       failureReason_selected_context_unresolved_user: 'Codex 没能解析所选的内容或上下文。',
       failureReason_selected_context_unresolved_next: '请重新选择目标，或者显式指定文件 / 区段。',
+      failureReason_selection_scope_violation_user: '生成的一项改动超出了已附加的选区，已阻止写回。',
+      failureReason_selection_scope_violation_next: '请重新选择目标范围，仅请求修改该范围。已写入的合法部分可撤销。',
+      failureReason_governance_blocked_user: '项目文件规则阻止了此次写入。Codex 未写入受影响的路径。',
+      failureReason_governance_blocked_next: '请在「设置 > 保护与隐私」中查看项目文件规则，然后请求修改允许写入的路径。',
+      failureReason_governance_readonly_user: '项目文件规则将此操作涉及的路径标记为只读。Codex 未执行此操作。',
+      failureReason_governance_readonly_next: '请在「设置 > 保护与隐私」中查看只读路径规则，然后请求修改允许写入的路径。',
+      failureReason_governance_writable_allowlist_user: '此操作涉及的路径不在配置的可写路径范围内。Codex 未执行此操作。',
+      failureReason_governance_writable_allowlist_next: '请在「设置 > 保护与隐私」中查看可写路径规则，然后请求修改允许范围内的路径。',
       failureReason_target_file_not_found_user: 'Codex 在当前 Overleaf 项目中没有找到 {file}。',
       failureReason_target_file_not_found_next: '请在 Overleaf 中核对文件名和路径后重试。',
       failureReason_target_file_open_failed_user: 'Codex 没能在 Overleaf 中打开 {file}。',
@@ -1132,6 +1424,10 @@
       failureReason_codex_timeout_next: '请检查本机 Codex 是否仍在运行；如果没有进展，可以中断后缩小 @context 再重试。',
       failureReason_codex_output_limit_user: '本地 Codex 输出过长，桥接器停止读取。',
       failureReason_codex_output_limit_next: '请缩小 @context 后重试，或在技术详情中查看输出限制。',
+      failureReason_codex_local_skill_unavailable_user: '所选 Codex 本地技能不可用或已关闭，本轮没有启动。',
+      failureReason_codex_local_skill_unavailable_next: '请打开技能页，选择可用且已启用的技能后重新提交。',
+      failureReason_codex_local_skills_failed_user: 'Codex 本地技能未能加载，本轮没有启动。',
+      failureReason_codex_local_skills_failed_next: '请打开技能页重新加载本地目录，然后重新提交。',
       failureReason_codex_not_found_user: '本机没有找到 Codex CLI。',
       failureReason_codex_not_found_next: '请确认终端里可以运行 `codex`，然后重新安装 native host 或刷新扩展后重试。',
       failureReason_storage_quota_exceeded_user: '浏览器本地存储配额已超出。',

package/extension/src/shared/managedUpdateProjection.js

@@ -5,9 +5,9 @@
     waiting: 'waiting_for_idle',
     waiting_for_safe_point: 'waiting_for_idle',
     awaiting_health_check: 'awaiting_health',
-    health_checking: 'awaiting_health'
+    health_checking: 'awaiting_health',
+    bootstrap_pending: 'awaiting_health'
   });
-
   const PHASES = Object.freeze([
     'idle',
     'up_to_date',

package/extension/src/shared/nativeRequestIdentity.js

@@ -55,6 +55,7 @@
 
   return Object.freeze({
     MAX_REQUEST_ID_CHARS,
+    validate,
     resolve
   });
 });

package/extension/src/shared/pageRpcContract.js

@@ -5,7 +5,7 @@
 })(typeof window !== 'undefined' ? window : (typeof globalThis !== 'undefined' ? globalThis : this), function () {
   'use strict';
 
-  var REVISION = '2026-09-27-writing-style-references-v33';
+  var REVISION = '2026-10-05-scope-correction-v42';
   var METHODS = freezeCatalog({
     initializeCapability: entry('bridge.initialize', 'control', 'none', 'default', false, 'none'),
     probe: entry('bridge.probe', 'read', 'none', 'default', false, 'safe'),
@@ -20,12 +20,13 @@
     ensureReviewing: entry('reviewing.enable', 'page_state', 'optional', 'default', true, 'idempotent'),
     ensureEditing: entry('reviewing.disable', 'page_state', 'optional', 'default', true, 'idempotent'),
     applyOperations: entry('document.write', 'document', 'required', 'writeback', true, 'no_retry'),
-    getWritebackReceipt: entry('writeback.receipt', 'read', 'required', 'default', true, 'safe'),
+    // Receipts settle already-dispatched writes after cancellation; their RPC deadlines still apply.
+    getWritebackReceipt: entry('writeback.receipt', 'read', 'required', 'default', false, 'safe'),
     getSelectionContext: entry('editor.selection', 'read', 'required', 'default', true, 'safe'),
-    binaryUploadBegin: entry('asset.stage', 'cache', 'required', 'default', false, 'no_retry'),
+    binaryUploadBegin: entry('asset.stage', 'cache', 'required', 'default', true, 'no_retry'),
     binaryUploadAppend: entry('asset.stage', 'cache', 'none', 'writeback', true, 'no_retry'),
     binaryUploadCommit: entry('asset.write', 'document', 'required', 'writeback', true, 'no_retry'),
-    binaryUploadStatus: entry('asset.receipt', 'read', 'required', 'default', true, 'safe'),
+    binaryUploadStatus: entry('asset.receipt', 'read', 'required', 'default', false, 'safe'),
     binaryUploadAbort: entry('asset.stage', 'cache', 'none', 'default', false, 'idempotent'),
     jumpToPosition: entry('editor.navigate', 'navigation', 'required', 'default', false, 'idempotent'),
     reconcileTrackedChangeCapture: entry('tracked_changes.read', 'read', 'required', 'default', false, 'safe'),

package/extension/src/shared/projectFiles.js

@@ -83,55 +83,31 @@
       .replace(/^\/+/, '');
   }
 
+  // Project metadata, ZIP names and operation paths are already literal names.
+  // Decoding here would alias e.g. "a%20b.tex" with "a b.tex".
   function normalizeSafeProjectPath(value) {
-    if (typeof value !== 'string') {
-      return '';
-    }
-    if (hasControlCharacter(value)) {
-      return '';
-    }
-    const trimmed = value.trim();
-    if (!trimmed || trimmed.length > MAX_SAFE_PROJECT_PATH_LENGTH) {
-      return '';
-    }
-    if (trimmed.startsWith('/') || trimmed.includes('\\') || hasWindowsDrivePrefix(trimmed)) {
-      return '';
-    }
+    if (typeof value !== 'string' || !value || value.length > MAX_SAFE_PROJECT_PATH_LENGTH || value.trim() !== value
+      || hasControlCharacter(value) || value.startsWith('/') || value.includes('\\')
+      || hasWindowsDrivePrefix(value)) return '';
+    return value.split('/').some(segment => !segment || segment === '.' || segment === '..') ? '' : value;
+  }
 
-    let decoded = trimmed;
+  // Use only at an explicitly URL-encoded input boundary. Return one decoding,
+  // while conservatively checking nested encodings for traversal/separators.
+  function normalizeUrlEncodedProjectPath(value) {
+    if (typeof value !== 'string' || hasEncodedSeparator(value)) return '';
+    let decoded;
+    try { decoded = decodeURIComponent(value); } catch (_error) { return ''; }
+    const result = normalizeSafeProjectPath(decoded);
+    if (!result) return '';
     for (let index = 0; index < 3; index += 1) {
-      if (hasEncodedSeparator(decoded)) {
-        return '';
-      }
+      if (hasEncodedSeparator(decoded) || !normalizeSafeProjectPath(decoded)) return '';
       let next;
-      try {
-        next = decodeURIComponent(decoded);
-      } catch (_error) {
-        return '';
-      }
-      if (next === decoded) {
-        break;
-      }
+      try { next = decodeURIComponent(decoded); } catch (_error) { break; }
+      if (next === decoded) break;
       decoded = next;
     }
-
-    if (hasControlCharacter(decoded)
-      || decoded.startsWith('/')
-      || decoded.includes('\\')
-      || hasWindowsDrivePrefix(decoded)
-      || decoded.length > MAX_SAFE_PROJECT_PATH_LENGTH) {
-      return '';
-    }
-
-    const normalized = decoded.replace(/\/+/g, '/').trim();
-    if (!normalized || normalized.length > MAX_SAFE_PROJECT_PATH_LENGTH) {
-      return '';
-    }
-    const segments = normalized.split('/');
-    if (segments.some(segment => !segment || segment === '.' || segment === '..')) {
-      return '';
-    }
-    return normalized;
+    return hasEncodedSeparator(decoded) || !normalizeSafeProjectPath(decoded) ? '' : result;
   }
 
   function assertSafeProjectPath(value, label = 'path') {
@@ -175,6 +151,7 @@
     isUsableProjectFileContent,
     isTextProjectPath,
     normalizePath,
-    normalizeSafeProjectPath
+    normalizeSafeProjectPath,
+    normalizeUrlEncodedProjectPath
   };
 });

package/extension/src/shared/providerProfiles.js

@@ -167,7 +167,8 @@
       anthropicThinkingMode: normalizeAnthropicThinkingMode(value.anthropicThinkingMode),
       anthropicPromptCaching: value.anthropicPromptCaching === true,
       impersonateClaudeCode: value.impersonateClaudeCode === true,
-      maxOutputTokens: normalizeMaxOutputTokens(value.maxOutputTokens),
+      maxOutputTokens: normalizeMaxOutputTokens(value.maxOutputTokens, value.outputBudgetVersion !== 1),
+      outputBudgetVersion: 1,
       hasSecret: value.hasSecret === true,
       secretUpdatedAt: normalizeInteger(value.secretUpdatedAt),
       endpointDisclosureHost: normalizeText(value.endpointDisclosureHost),
@@ -262,6 +263,7 @@
       anthropicPromptCaching: false,
       impersonateClaudeCode: false,
       maxOutputTokens: 65536,
+      outputBudgetVersion: 1,
       hasSecret: false,
       secretUpdatedAt: 0,
       endpointDisclosureHost: '',
@@ -380,9 +382,9 @@
     return Number.isFinite(number) && number >= 0 ? Math.floor(number) : 0;
   }
 
-  function normalizeMaxOutputTokens(value) {
+  function normalizeMaxOutputTokens(value, legacy = false) {
     const number = normalizeInteger(value);
-    if (!number || number === 8192 || number === 32768) return 65536;
+    if (!number || (legacy && (number === 8192 || number === 32768))) return 65536;
     return Math.min(65536, Math.max(256, number));
   }