codeply-cli 0.5.1 → 0.5.2

package/skills/network-bgp-diagnostics/SKILL.md

@@ -1,168 +1,168 @@
----
-name: network-bgp-diagnostics
-description: Diagnostics-only BGP troubleshooting patterns for neighbor state, route exchange, prefix policy, AS path inspection, and safe evidence collection.
-metadata:
-  origin: community
----
-
-# Network BGP Diagnostics
-
-Use this skill when a BGP session is down, flapping, established with missing
-routes, or advertising unexpected prefixes. The default workflow is read-only
-evidence collection; policy and reset actions belong in a reviewed change
-window.
-
-## When to Use
-
-- BGP neighbors are stuck in Idle, Connect, Active, OpenSent, or OpenConfirm.
-- A session is Established but expected prefixes are missing.
-- A route-map, prefix-list, max-prefix limit, or AS path policy may be filtering
-  routes.
-- You need before/after evidence for a BGP change.
-- You are reviewing automation that parses BGP summary output.
-
-## Read-Only Triage Flow
-
-1. Identify the exact neighbor, address family, VRF, and local/remote ASNs.
-2. Capture summary state and last reset reason.
-3. Prove reachability to the peer source address.
-4. Check route policy references before assuming transport failure.
-5. Compare advertised, received, and installed routes where the platform
-   supports those commands.
-
-```text
-show bgp summary
-show bgp neighbors <peer>
-show ip route <peer>
-show tcp brief | include <peer>|:179
-show logging | include BGP|<peer>
-show running-config | section router bgp
-show ip prefix-list
-show route-map
-```
-
-Use platform-specific address-family commands when the device uses VRFs, IPv6,
-VPNv4, or EVPN. Do not assume global IPv4 unicast.
-
-## State Interpretation
-
-| State | First checks |
-| --- | --- |
-| Established with prefix count | Route exchange is up; inspect policy and table selection |
-| Established with zero prefixes | Check inbound policy, max-prefix, advertised routes, and AFI/SAFI |
-| Active | TCP session is not completing; check routing, source, ACLs, and peer reachability |
-| Connect | TCP connection is in progress; check path and remote listener |
-| OpenSent/OpenConfirm | TCP works; check ASN, authentication, timers, capabilities, and logs |
-| Idle | Neighbor may be disabled, missing config, blocked by policy, or backoff timer |
-
-## Transport Checks
-
-```text
-ping <peer> source <local-source>
-traceroute <peer> source <local-source>
-show ip route <peer>
-show bgp neighbors <peer> | include BGP state|Last reset|Local host|Foreign host
-```
-
-If the peer is sourced from a loopback, confirm both directions route to the
-loopback addresses and that the neighbor config uses the expected update source.
-
-Avoid disabling ACLs or firewall policy as a diagnostic shortcut. Read hit
-counters, logs, and path state first.
-
-## Route Policy Checks
-
-```text
-show bgp neighbors <peer> advertised-routes
-show bgp neighbors <peer> routes
-show ip prefix-list <name>
-show route-map <name>
-show bgp <prefix>
-```
-
-Some platforms require additional configuration before `received-routes` is
-available. Do not add that configuration during incident triage unless the
-operator approves the change.
-
-## AS Path And Prefix Review
-
-```text
-show bgp regexp _65001_
-show bgp regexp ^65001$
-show bgp <prefix>
-show bgp neighbors <peer> advertised-routes | include Network|Path|<prefix>
-```
-
-Use AS-path regex carefully. `_65001_` matches AS 65001 as a token. Plain
-`65001` can match longer ASNs or unrelated text.
-
-## Parser Pattern
-
-```python
-import re
-from typing import Any
-
-BGP_SUMMARY_RE = re.compile(
-    r"^(?P<neighbor>\d{1,3}(?:\.\d{1,3}){3})\s+"
-    r"(?P<version>\d+)\s+"
-    r"(?P<remote_as>\d+)\s+"
-    r"(?P<msg_rcvd>\d+)\s+"
-    r"(?P<msg_sent>\d+)\s+"
-    r"(?P<table_version>\d+)\s+"
-    r"(?P<input_queue>\d+)\s+"
-    r"(?P<output_queue>\d+)\s+"
-    r"(?P<uptime>\S+)\s+"
-    r"(?P<state_or_prefixes>\S+)$",
-    re.M,
-)
-
-def parse_bgp_summary(raw: str) -> list[dict[str, Any]]:
-    rows = []
-    for match in BGP_SUMMARY_RE.finditer(raw):
-        state_or_prefixes = match.group("state_or_prefixes")
-        if state_or_prefixes.isdigit():
-            state = "Established"
-            prefixes_received = int(state_or_prefixes)
-        else:
-            state = state_or_prefixes
-            prefixes_received = None
-        rows.append({
-            "neighbor": match.group("neighbor"),
-            "remote_as": int(match.group("remote_as")),
-            "state": state,
-            "prefixes_received": prefixes_received,
-            "uptime": match.group("uptime"),
-        })
-    return rows
-```
-
-Prefer structured parser output when available, but store raw output with the
-incident record because BGP summary formats vary by platform and address family.
-
-## Change-Window Only
-
-These actions can affect routing and should not be suggested as automatic
-diagnostics:
-
-- Clearing a BGP session.
-- Changing neighbor authentication, timers, update source, route-maps, or
-  prefix-lists.
-- Enabling additional received-route storage.
-- Relaxing firewall, ACL, or control-plane policy.
-
-If a reset is approved, prefer the least disruptive soft or route-refresh option
-supported by the platform and document exactly why it is safe.
-
-## Anti-Patterns
-
-- Assuming `Active` always means the remote side is down.
-- Ignoring VRF, address family, or update-source differences.
-- Using broad AS-path regex without token boundaries.
-- Hard-resetting a peer before reading last reset reason and logs.
-- Treating missing `received-routes` output as proof that no routes arrived.
-
-## See Also
-
-- Skill: `cisco-ios-patterns`
-- Skill: `network-config-validation`
-- Skill: `network-interface-health`
+---
+name: network-bgp-diagnostics
+description: Diagnostics-only BGP troubleshooting patterns for neighbor state, route exchange, prefix policy, AS path inspection, and safe evidence collection.
+metadata:
+  origin: community
+---
+
+# Network BGP Diagnostics
+
+Use this skill when a BGP session is down, flapping, established with missing
+routes, or advertising unexpected prefixes. The default workflow is read-only
+evidence collection; policy and reset actions belong in a reviewed change
+window.
+
+## When to Use
+
+- BGP neighbors are stuck in Idle, Connect, Active, OpenSent, or OpenConfirm.
+- A session is Established but expected prefixes are missing.
+- A route-map, prefix-list, max-prefix limit, or AS path policy may be filtering
+  routes.
+- You need before/after evidence for a BGP change.
+- You are reviewing automation that parses BGP summary output.
+
+## Read-Only Triage Flow
+
+1. Identify the exact neighbor, address family, VRF, and local/remote ASNs.
+2. Capture summary state and last reset reason.
+3. Prove reachability to the peer source address.
+4. Check route policy references before assuming transport failure.
+5. Compare advertised, received, and installed routes where the platform
+   supports those commands.
+
+```text
+show bgp summary
+show bgp neighbors <peer>
+show ip route <peer>
+show tcp brief | include <peer>|:179
+show logging | include BGP|<peer>
+show running-config | section router bgp
+show ip prefix-list
+show route-map
+```
+
+Use platform-specific address-family commands when the device uses VRFs, IPv6,
+VPNv4, or EVPN. Do not assume global IPv4 unicast.
+
+## State Interpretation
+
+| State | First checks |
+| --- | --- |
+| Established with prefix count | Route exchange is up; inspect policy and table selection |
+| Established with zero prefixes | Check inbound policy, max-prefix, advertised routes, and AFI/SAFI |
+| Active | TCP session is not completing; check routing, source, ACLs, and peer reachability |
+| Connect | TCP connection is in progress; check path and remote listener |
+| OpenSent/OpenConfirm | TCP works; check ASN, authentication, timers, capabilities, and logs |
+| Idle | Neighbor may be disabled, missing config, blocked by policy, or backoff timer |
+
+## Transport Checks
+
+```text
+ping <peer> source <local-source>
+traceroute <peer> source <local-source>
+show ip route <peer>
+show bgp neighbors <peer> | include BGP state|Last reset|Local host|Foreign host
+```
+
+If the peer is sourced from a loopback, confirm both directions route to the
+loopback addresses and that the neighbor config uses the expected update source.
+
+Avoid disabling ACLs or firewall policy as a diagnostic shortcut. Read hit
+counters, logs, and path state first.
+
+## Route Policy Checks
+
+```text
+show bgp neighbors <peer> advertised-routes
+show bgp neighbors <peer> routes
+show ip prefix-list <name>
+show route-map <name>
+show bgp <prefix>
+```
+
+Some platforms require additional configuration before `received-routes` is
+available. Do not add that configuration during incident triage unless the
+operator approves the change.
+
+## AS Path And Prefix Review
+
+```text
+show bgp regexp _65001_
+show bgp regexp ^65001$
+show bgp <prefix>
+show bgp neighbors <peer> advertised-routes | include Network|Path|<prefix>
+```
+
+Use AS-path regex carefully. `_65001_` matches AS 65001 as a token. Plain
+`65001` can match longer ASNs or unrelated text.
+
+## Parser Pattern
+
+```python
+import re
+from typing import Any
+
+BGP_SUMMARY_RE = re.compile(
+    r"^(?P<neighbor>\d{1,3}(?:\.\d{1,3}){3})\s+"
+    r"(?P<version>\d+)\s+"
+    r"(?P<remote_as>\d+)\s+"
+    r"(?P<msg_rcvd>\d+)\s+"
+    r"(?P<msg_sent>\d+)\s+"
+    r"(?P<table_version>\d+)\s+"
+    r"(?P<input_queue>\d+)\s+"
+    r"(?P<output_queue>\d+)\s+"
+    r"(?P<uptime>\S+)\s+"
+    r"(?P<state_or_prefixes>\S+)$",
+    re.M,
+)
+
+def parse_bgp_summary(raw: str) -> list[dict[str, Any]]:
+    rows = []
+    for match in BGP_SUMMARY_RE.finditer(raw):
+        state_or_prefixes = match.group("state_or_prefixes")
+        if state_or_prefixes.isdigit():
+            state = "Established"
+            prefixes_received = int(state_or_prefixes)
+        else:
+            state = state_or_prefixes
+            prefixes_received = None
+        rows.append({
+            "neighbor": match.group("neighbor"),
+            "remote_as": int(match.group("remote_as")),
+            "state": state,
+            "prefixes_received": prefixes_received,
+            "uptime": match.group("uptime"),
+        })
+    return rows
+```
+
+Prefer structured parser output when available, but store raw output with the
+incident record because BGP summary formats vary by platform and address family.
+
+## Change-Window Only
+
+These actions can affect routing and should not be suggested as automatic
+diagnostics:
+
+- Clearing a BGP session.
+- Changing neighbor authentication, timers, update source, route-maps, or
+  prefix-lists.
+- Enabling additional received-route storage.
+- Relaxing firewall, ACL, or control-plane policy.
+
+If a reset is approved, prefer the least disruptive soft or route-refresh option
+supported by the platform and document exactly why it is safe.
+
+## Anti-Patterns
+
+- Assuming `Active` always means the remote side is down.
+- Ignoring VRF, address family, or update-source differences.
+- Using broad AS-path regex without token boundaries.
+- Hard-resetting a peer before reading last reset reason and logs.
+- Treating missing `received-routes` output as proof that no routes arrived.
+
+## See Also
+
+- Skill: `cisco-ios-patterns`
+- Skill: `network-config-validation`
+- Skill: `network-interface-health`