codebee 0.1.1 → 0.1.3

package/app/ui/i18n.js

@@ -264,6 +264,7 @@
     "暂停": "Pause",
     "继续执行": "Resume",
     "也可直接粘贴截图": "or paste a screenshot directly",
+    "添加附件": "Add attachment",
     "添加附件：截图/文本/代码/PDF 等，创建任务时落盘到工作目录 _attachments/": "Add attachments — screenshots/text/code/PDF; saved to the task workdir under _attachments/ on creation",
     "附件最多 12 个": "Up to 12 attachments",
     "不支持的附件类型：": "Unsupported file type: ",
@@ -348,7 +349,7 @@
     "「": "\"",
     "」将变为只读。": "\" will become read-only.",
     "」恢复为内置默认配置？": "\" restored to built-in defaults?",
-    "」控制中（点击接管）": "\" is in control (click to take over)",
+    "{0} 正在控制（点击接管）": "{0} is in control (click to take over)",
     "」？已有任务不受影响。": "\"? Existing tasks are not affected.",
     "」？\n停用后它的绑定会回落为 CLI 默认；配置与模型列表保留，可随时再启用。": "\"?\nOnce disabled, its binding reverts to CLI defaults; config and model list are kept and can be re-enabled anytime.",
     "」？\n刷新 / 重新导入模型列表都不会再带回，可在分组底部「恢复全部」找回。": "\"?\nRefresh or re-import won't bring it back; you can recover from \"Restore all\" at the bottom of the group.",
@@ -475,6 +476,7 @@
     "一条能在工作目录里跑的命令，退出码 0 即视为通过；之后可在表单改": "A command that runs in the workdir — exit code 0 means pass; editable in the form later",
     "留空靠 AI 评审": "empty — AI review only",
     "协议不匹配，解析时跳过": "protocol mismatch — skipped when resolving",
+    "无可用 wire，解析时跳过": "no usable wire — skipped when resolving",
     "该 CLI 只接受特定 wire 协议的供应商，当前没有匹配项——先到「模型接入」页导入对应协议的网关。": "This CLI only accepts providers on a specific wire protocol and none match — import a compatible gateway on the Models page first.",
     "%1 个供应商 wire 协议不匹配已隐藏（降级只在同协议网关间进行）。": "%1 provider(s) hidden due to wire-protocol mismatch — fallback stays within the same protocol.",
     "已适配（%1 wire）": "adapted (%1 wire)",
@@ -845,6 +847,18 @@
     "勾选该 CLI 编排运行时的模型（可跨供应商混选）：第 1 条是主模型，其余按顺序作降级备选，每条自带该供应商的凭据注入。": "Pick the models this CLI uses at runtime (cross-provider is OK): the first is primary, the rest are fallbacks in order. Each entry carries its provider's credentials.",
     "最多选 3 条（1 个主模型 + 2 个降级备选）。": "Up to 3 entries (1 primary + 2 fallbacks).",
     "有未保存改动": "Unsaved changes",
+    "一键推荐绑定": "Auto-fill recommendations",
+    "全部保存": "Save all",
+    "已为 %1 个 CLI 预填推荐模型，确认无误后点各卡片「保存」，或点右上「全部保存」。": "Prefilled recommended models for %1 CLI(s). Review each card and click \"Save\", or \"Save all\" above.",
+    "已为 %1 个空链 CLI 预填推荐，并修复 %2 条失效链——确认后保存。": "Prefilled %1 empty chain(s) and repaired %2 broken chain(s) — review and save.",
+    "已为 %1 条失效链重新推荐（原厂商失效/停用/模型停用）——确认后点「全部保存」生效。": "Re-recommended %1 broken chain(s) (dead/disabled provider or model) — click \"Save all\" to apply.",
+    "供应商已删除": "Provider deleted",
+    "供应商已停用": "Provider disabled",
+    "密钥全部冷却中": "All keys cooling down",
+    "模型已停用": "Model disabled",
+    "没有可推荐的：先到「模型接入」页导入与 CLI 协议匹配的供应商。": "Nothing to recommend — import providers matching the CLI protocols on the \"Models\" page first.",
+    "所有 CLI 都已配置模型链，无需推荐。": "All CLIs already have model chains — no recommendation needed.",
+    "已保存 %1 个 CLI 的绑定。": "Saved bindings for %1 CLI(s).",
     "未安装": "Not installed",
     "有新版本 ": "New version ",
     "已是最新": "Up to date",
@@ -1395,6 +1409,10 @@
     "通义千问编码 CLI（gemini-cli 系）；无头走 stdin；绑定凭据经打开注入写 settings.json 的 env 段（OPENAI_*，qwen 存在即优先 openai 兼容通道）": "Qwen coding CLI (gemini-cli family); headless via stdin; bound credentials are injected at launch into the env section of settings.json (OPENAI_* — prefers the openai-compatible channel when present)",
     "Python 系结对编程 CLI；用 py -3.13 安装，模型经其配置/环境变量设置": "Python pairing CLI; install with py -3.13, model set via its config/env",
     "xAI 终端编码智能体；可执行名是 grok（不是 grok-build）；默认模型在 ~/.grok/config.toml 的 [models] default（JSON 版配置不存在）": "xAI terminal coding agent; the executable is grok (not grok-build); the default model goes to [models] default in ~/.grok/config.toml (no JSON config variant)",
+    "网关型个人 AI 智能体（原 Clawdbot）；编排模板装好后需验证；默认模型在 openclaw.json 的 agents.defaults.model.primary（顶层 model 键会被 schema 校验拒绝启动，绝不写顶层）": "Gateway-style personal AI agent (formerly Clawdbot); verify after setup; the default model goes to agents.defaults.model.primary in openclaw.json (a top-level model key fails the schema check and blocks startup — never write it)",
+    "月之暗面 Kimi 编码 CLI（TypeScript 版，需 Node ≥22.19）；旧 Python 版 kimi-cli 正在下线；默认模型在 ~/.kimi-code/config.toml 的顶层 default_model（值须是 [models] 表里定义的别名），首启自动建文件": "Moonshot AI Kimi coding CLI (TypeScript edition, requires Node ≥22.19); the legacy Python kimi-cli is being retired; the default model goes to top-level default_model in ~/.kimi-code/config.toml (an alias defined in the [models] table), auto-created on first launch",
+    "小米 MiMo Code（opencode 衍生）；无头调用是子命令 mimo run \"提示词\"，-p 在该 CLI 是 --password；默认模型在 ~/.config/mimocode/mimocode.jsonc 顶层 model（provider/model 格式），onboarding 自动建文件": "Xiaomi MiMo Code (OpenCode derivative); headless is the subcommand mimo run \"prompt\" — -p means --password on this CLI; the default model goes to top-level model in ~/.config/mimocode/mimocode.jsonc (provider/model format), auto-created by onboarding",
+    "Earendil Works 的 Pi 编码 CLI（需 Node ≥22.19）；包名必须带 @earendil-works/ 前缀；默认模型在 ~/.pi/agent/settings.json 的 defaultModel（须配 defaultProvider 才能解析）": "Pi coding CLI by Earendil Works (requires Node ≥22.19); the package name must carry the @earendil-works/ prefix; the default model goes to defaultModel in ~/.pi/agent/settings.json (defaultProvider must be set for it to resolve)",
     "Earendil Works 的 Pi 编码 CLI（需 Node ≥22.19）；包名必须带 @earendil-works/ 前缀": "Earendil Works' Pi coding CLI (needs Node ≥22.19); package name must carry the @earendil-works/ prefix",
     "DeepSeek 官方 agent harness（dsh，profile 插件架构）；无头是「一次性任务」——答完即退": "DeepSeek's official agent harness (dsh, profile-plugin architecture); headless is one-shot — it answers and exits",
     "小米 MiMo Code（opencode 衍生）；无头调用是子命令 mimo run \"提示词\"，-p 在该 CLI 是 --password": "Xiaomi MiMo Code (OpenCode derivative); headless is the subcommand mimo run \"prompt\" — -p means --password on this CLI",
@@ -1443,8 +1461,9 @@
     "作品名称": "Book Title",
     "签约模式": "Signing Mode",
     "目标读者": "Target Readers",
-    "阅读标签": "Reading Tags",
-    "内容标签": "Content Tags",
+    "主题标签": "Theme Tags",
+    "角色标签": "Role Tags",
+    "情节标签": "Plot Tags",
     "一级分类": "Category",
     "二级分类": "Subcategory",
     "作品标签": "Tags",

package/app/ui/index.html

@@ -48,6 +48,8 @@
   <symbol id="i-bee" viewBox="0 0 24 24"><ellipse cx="12" cy="14" rx="5.2" ry="6.2"/><path d="M8 12h8M8.3 14.8h7.4M9.4 17.4h5.2"/><path d="M9.6 8.4C8 6.2 5.4 6.6 5.7 8.6c.2 1.4 2.1 1.9 3.7 1.1M14.4 8.4c1.6-2.2 4.2-1.8 3.9.2-.2 1.4-2.1 1.9-3.7 1.1"/><path d="M13.4 5.6l2.1-2.1M15.9 6.9l2.5-1.2"/></symbol>
   <symbol id="i-gamepad" viewBox="0 0 24 24"><line x1="6" x2="10" y1="11" y2="11"/><line x1="8" x2="8" y1="9" y2="13"/><line x1="15" x2="15.01" y1="12" y2="12"/><line x1="18" x2="18.01" y1="10" y2="10"/><path d="M17.32 5H6.68a4 4 0 0 0-3.978 3.59c-.006.052-.01.101-.017.152C2.604 9.416 2 14.456 2 16a3 3 0 0 0 3 3c1 0 1.5-.5 2-1l1.414-1.414A2 2 0 0 1 9.828 16h4.344a2 2 0 0 1 1.414.586L17 18c.5.5 1 1 2 1a3 3 0 0 0 3-3c0-1.545-.604-6.584-.685-7.258-.007-.05-.011-.1-.017-.151A4 4 0 0 0 17.32 5z"/></symbol>
   <symbol id="i-book" viewBox="0 0 24 24"><path d="M4 5a2 2 0 0 1 2-2h9l5 5v11a2 2 0 0 1-2 2H6a2 2 0 0 1-2-2z"/><path d="M8 8h5M8 12h8M8 16h6"/></symbol>
+  <symbol id="i-plus" viewBox="0 0 24 24"><path d="M12 5v14"/><path d="M5 12h14"/></symbol>
+  <symbol id="i-chat" viewBox="0 0 24 24"><path d="M21 15a2 2 0 0 1-2 2H7l-4 4V5a2 2 0 0 1 2-2h14a2 2 0 0 1 2 2z"/><path d="M8 9h8M8 12.5h5"/></symbol>
   <symbol id="i-workflow" viewBox="0 0 24 24"><rect x="3" y="3" width="7" height="7" rx="1.5"/><rect x="14" y="14" width="7" height="7" rx="1.5"/><path d="M10 6.5h4a3 3 0 0 1 3 3V14"/></symbol>
   <symbol id="i-phone" viewBox="0 0 24 24"><rect x="5" y="2" width="14" height="20" rx="2.5"/><path d="M12 18h.01"/></symbol>
   <symbol id="i-arrow-left" viewBox="0 0 24 24"><path d="M19 12H5"/><path d="m12 19-7-7 7-7"/></symbol>
@@ -380,7 +382,7 @@
               <div class="rd-chat-bar">
                 <textarea id="rd-chat-input" rows="2" data-i18n-ph="继续说…（Enter 发送，Shift+Enter 换行；可直接粘贴截图）" placeholder="继续说…（Enter 发送，Shift+Enter 换行；可直接粘贴截图）"></textarea>
                 <div class="rd-chat-tools">
-                  <button id="rd-chat-attach" class="ghost small" data-i18n="附件">附件</button>
+                  <button id="rd-chat-attach" class="ghost" data-i18n-title="添加附件" title="添加附件" data-i18n-aria="添加附件" aria-label="添加附件"><svg class="ico" aria-hidden="true"><use href="#i-plus"></use></svg></button>
                   <span id="rd-chat-att-list" class="rd-att-list"></span>
                   <span id="rd-chat-hint" class="rd-hint"></span>
                   <button id="rd-chat-send" class="primary round" data-i18n-title="发送" title="发送" data-i18n-aria="发送" aria-label="发送"><svg class="ico" aria-hidden="true"><use href="#i-arrow-up"></use></svg></button>
@@ -549,7 +551,10 @@
       <!-- CLI 绑定 -->
       <div id="sub-bindings" class="subpage hidden">
         <div class="panel wide">
-          <div class="panel-head"><h2 data-i18n="CLI 绑定">CLI 绑定</h2></div>
+          <div class="panel-head"><h2 data-i18n="CLI 绑定">CLI 绑定</h2>
+            <button id="btn-autobind" class="ghost small" onclick="autoBindAll()" data-i18n="一键推荐绑定">一键推荐绑定</button>
+            <button id="btn-saveall-bind" class="ghost small hidden" onclick="saveAllBindings()" data-i18n="全部保存">全部保存</button>
+          </div>
           <p data-i18n="CodeBee 编排运行时的模型都在这里配：模型链可跨厂商混搭——每条自带供应商注入（API key + 地址），第 1 条是主模型、其余按顺序降级，瞬态错误自动切到下一条（可能是另一家厂商）。链空则按供应商默认 / 难度自动选。只影响 CodeBee 发起的调用，不改写 CLI 全局配置（要改默认模型请到「智能体管理」页）。" class="hint">CodeBee 编排运行时的模型都在这里配：模型链可跨厂商混搭——每条自带供应商注入（API key + 地址），第 1 条是主模型、其余按顺序降级，瞬态错误自动切到下一条（可能是另一家厂商）。链空则按供应商默认 / 难度自动选。只影响 CodeBee 发起的调用，不改写 CLI 全局配置（要改默认模型请到「智能体管理」页）。</p>
           <div id="binding-list" class="cards"></div>
         </div>