claude-token-saver 3.44.0 → 3.55.0

package/docs/CODEX.md

@@ -0,0 +1,497 @@
+# Codex Integration
+
+[← README](../README.md) · [한국어](./CODEX.ko.md)
+
+Sprag supports Codex through its native `AGENTS.md` and `hooks.json` interfaces.
+The default agent remains Claude Code. Pass `--agent codex` before or after the
+subcommand to select Codex explicitly; this does not change a global default.
+
+## Install
+
+```sh
+npm i -g sprag-cli
+```
+
+The package install sets up Codex on its own when Codex is present, together
+with the Claude Code integration and the bundled presets; nothing is asked
+(`sprag install --manual` asks at each step). For a Codex-only installation that
+leaves Claude Code settings alone, skip the postinstall and run the Codex
+install directly:
+
+```sh
+npm i -g sprag-cli --ignore-scripts
+sprag install --agent codex
+```
+
+Both integrations can coexist. Codex installation uses `$CODEX_HOME` when set,
+otherwise `~/.codex`. It adds the integration hooks to `hooks.json` and a marked harness
+block to the global `AGENTS.md`. A non-empty `AGENTS.override.md` takes precedence,
+so the block is added there instead when present. Existing instructions and
+other hooks are preserved; changed files are backed up. `config.toml`, hook
+trust settings, and Claude Code settings are never changed by this command.
+
+Open **`/hooks` in Codex**, review the Sprag commands, and trust them. New or
+changed hooks do not run until trusted. Use a Codex release that supports the
+events documented below. Admin policies or `features.hooks = false` may disable
+hooks. The `sprag` executable and Node.js must be on Codex's PATH.
+
+On macOS with zsh, installation also makes sure tmux is present: it installs
+tmux with Homebrew when missing (skip this with `CTS_NO_TMUX=1`) and adds the
+zsh integration so typing `codex` shows the panel inline in the same terminal.
+The separate-window hook is then not registered. When tmux cannot be
+installed, the login shell is not zsh, or an existing `codex` alias or
+function is already present, installation falls back to the separate window
+instead. `sprag panel shell remove --agent codex` is remembered across
+reinstalls and upgrades, and `--no-panel` skips both.
+An explicit `panel auto off` preference survives reinstall. Installation
+reports registration, not successful activation. After approval and restarting
+Codex, run `sprag panel doctor --agent codex` to check the last hook execution,
+any launch failure, and recent rendered frames. These diagnostics are local;
+they do not read or change Codex's trust database.
+
+`CTS_NO_HARNESS=1` skips the global harness. Korean guidance is opt-in, using the
+existing shared Sprag preference:
+
+```sh
+sprag korean on --agent codex
+sprag korean lint warn --agent codex
+sprag doc2md install-converter --agent codex
+```
+
+`korean on`, `cohesion on`, `brief on`, `doc2md on`, and `delegate on`
+register Codex hooks before saving the enabled preference. If hook registration
+fails, the preference stays unchanged. Review new or changed definitions in
+`/hooks`; registration does not grant trust. Turning a feature off keeps the
+shared hooks needed by other features.
+
+## Supported Workflows
+
+| Feature | Codex behavior |
+|---|---|
+| Harness | Five principles in global or project `AGENTS.md`, with override-file support |
+| Ratchet rules | Separate Codex files; global and project rules injected at SessionStart, including resume and compaction |
+| Korean guidance / English cohesion | SessionStart injection using shared Sprag preferences |
+| Korean write-time lint | PostToolUse feedback for `apply_patch` and recognized shell write targets; block, warn, and off modes |
+| Documents | Shared converter, prompt paths, supported file reads, and recognized document/cache write guards; `sprag doc2md <file> --agent codex` also works manually |
+| Token report | Table, JSON, or CSV from local Codex rollout logs, with time and project filters |
+| Statusline | `--statusline` or `--format statusline` renders the compact panel once, with wrapping and label/color preferences |
+| Briefing | UserPromptSubmit reports fresh context/limit threshold crossings once per session and threshold cycle |
+| Warning history | `last` and `history` read Codex-only, per-session warning records |
+| Handoff | Git state, session/model, recorded context/tokens/limits, and fillable remaining-work sections |
+| Subagents | Opt-in native spawn model routing, scoped category rules, and SubagentStart guidance |
+| Cache timer | Resolved provider retention policy after recorded cache usage; exact expiry is unknown |
+| Route discovery | Repeated simple turns grouped by project, provider, and parent model; no automatic registration |
+| Ratchet detection | Recent repeated command/patch failures produce `ratchet?` candidates |
+| Seed presets | Compatible ratchet rules, separate decisions, explicit registration scope |
+| Routing saved | Sprag-attributed child tokens priced with matching LiteLLM rates; an estimate, not billed savings |
+| Diagnostics | `doctor` checks user config, hook registration, harness, logs, panel activity, and preferences |
+| Capability matrix | `capabilities` lists supported, partial, native, and unsupported areas without invoking a model |
+
+The document converter is shared with Claude Code and requires its optional
+converter dependencies. Disable automatic Codex conversion and write guards with
+`sprag doc2md off --agent codex` or `CTS_NO_DOC2MD=1`. PreToolUse handles supported
+file-read calls and literal single-file `cat`, `head`, and `tail` reads. Successful
+conversion blocks the original read with the Markdown path for a retry. Conversion
+failures are reported; unsafe archives are denied. Patches and recognized shell
+text writes cannot overwrite binary documents or conversion caches. Arbitrary
+extraction scripts and compound shell reads are not intercepted; use the manual
+command. Text extraction never verifies charts, images, or layout.
+
+Conversion hooks have a 600-second outer timeout to accommodate interpreter
+probes and multiple conversions; each converter invocation retains its own
+120-second limit. An unavailable Codex cache view is reported as
+`cache-unavailable` without suppressing other document results or the context
+briefing. Both byte-clipped output and converter-reported truncation are marked
+as incomplete in read and prompt feedback.
+
+Codex keeps document accounting separate from Claude. `Doc2md N docs (Codex total)`
+counts distinct source paths successfully prepared through Codex, including reuse
+of an existing conversion. Reusing or reconverting a source does not increment its
+count. The total is scoped to Codex home, not the current session. Old shared
+history is not imported. Counts are sorted by frequency, then extension, with no
+Claude pricing involved. Codex reads a neutral Markdown view without the shared
+cache's Claude-based savings banner; the shared cache remains unchanged.
+
+## Diagnostics And Continuity
+
+```sh
+sprag doctor --agent codex
+sprag doctor --agent codex --format json
+sprag capabilities --agent codex
+sprag brief --agent codex
+sprag brief on --agent codex
+sprag last --agent codex
+sprag history --agent codex --days 7 --format json
+sprag history --agent codex --session SESSION_ID
+sprag handoff --agent codex --cwd /path/to/repo
+sprag delegate on --agent codex
+```
+
+The doctor is read-only. It reports missing/outdated hook definitions, including
+insufficient timeouts or asynchronous handlers, disabled
+hooks in user config, and unavailable logs without treating registration as
+proof of trust. Its config report excludes provider credentials and is not an
+effective-config resolver: active profiles, project config, managed policy,
+and invocation overrides can differ. Check Codex `/hooks` for approval.
+
+Briefing is enabled by default after installing and trusting the prompt hook.
+It reads at most the latest 256 KiB of the current transcript and warns when
+recorded input reaches 80% or 95% of the recorded context window, or a reported
+rate-limit window reaches 90%. Missing measurements, measurements older than
+five minutes, and expired limits do not generate new warnings. Lower fresh
+context measurements re-arm the warning after compaction. `brief off` disables
+automatic briefing without disabling document conversion; bare `brief` shows
+current warnings without recording or consuming the automatic notification.
+
+History records automatic warning entries, not every tool call or a complete
+audit log. Files are separated by Codex home and session beneath Sprag's state
+directory; each keeps up to 200 warning entries. `--project` filters history by
+substring and `--session` by exact ID. The history remains separate from Claude
+warning records. A handoff file is never overwritten and identifies quota
+values as recorded snapshots, not live responses. Fill in its remaining-work
+sections before using it to continue in another session.
+
+Delegation is independently opt-in via `delegate on`. PreToolUse rewrites native
+`spawn_agent` arguments using Codex's `message`, `model`, and `reasoning_effort`
+fields. It preserves explicit model choices and custom roles, including custom
+overrides of built-in roles. SubagentStart injects scoped ratchets and enabled
+writing guidance. Bounds are instructions, not an enforced tool-call budget.
+Normal Codex sandbox and approval rules still apply. Review new hooks in `/hooks`.
+
+```sh
+sprag delegate on --agent codex
+sprag delegate model gpt-6-luna --effort high --agent codex
+sprag delegate model off --agent codex
+sprag delegate rules add explore --from gpt-6-astra --model gpt-6-luna --project --agent codex
+sprag delegate rules --agent codex
+sprag delegate rules rm 1 --agent codex
+```
+
+Use model IDs available from your provider. A default target applies to built-in
+spawns without an explicit model. Category rules (`paste`, `translate`, `explore`,
+`read`, `check`, `run`) reuse Sprag's classifier and escalation gates, require an
+exact parent model, and prefer project rules over global rules. Matching prompts
+request native delegation; unavailable subagent tools leave work on the main
+agent. Claude tier presets and history are not imported.
+
+## Harness Commands
+
+```sh
+sprag harness init --agent codex                 # current project
+sprag harness check --agent codex                # project, or global fallback
+sprag harness init --agent codex --global
+sprag harness promote --agent codex --project "Run the changed module's tests before reporting completion."
+sprag harness list --agent codex --project
+sprag harness rm 1 --agent codex --project
+sprag harness prune --agent codex --global --older-than 6 --dry-run
+sprag harness uninit --agent codex --project
+```
+
+Rules live in `<project>/.codex/ratchet.md` or `$CODEX_HOME/ratchet.md`.
+The harness also instructs Codex to retrieve both files, since Claude's `@file`
+import syntax is not used. Promotion always requires an explicit scope.
+`rm` and `prune` preserve backups; `uninit` removes only the managed block.
+
+The panel detects repeated command or patch failures in the recent rollout tail
+(up to 2 MiB, 30 tool-bearing turns, 30 minutes). Lookup misses and ordinary
+`grep`/`diff` exit-1 results are excluded. A `ratchet? #1 x2` chip identifies a
+candidate in that session. Inspect it before promoting:
+
+```sh
+sprag harness promote 1 --session SESSION_ID --project --agent codex
+```
+
+This appends an editable TODO for the cause and prevention, not a diagnosed fix.
+Prefer promoting a complete condition/action rule after confirming its cause.
+Candidate IDs are session-local and temporary; Claude candidate IDs are not imported.
+
+## Route Discovery And Presets
+
+```sh
+sprag route-scan --refresh --days 14 --agent codex
+sprag delegate rules add R1 --project --agent codex
+sprag route-scan dismiss R1 --agent codex
+sprag seed --agent codex
+sprag seed accept all --project --agent codex
+sprag seed skip all --agent codex
+sprag seed reset --agent codex
+```
+
+Route candidates need at least three completed simple turns with the same
+category, provider, parent model, and project. Aborted, already delegated,
+high-error, complex, and mid-turn steering requests are excluded. Archived
+copies of one session do not count twice. Modern turn usage takes precedence;
+older cumulative `token_count` records are supported without double-counting.
+
+Targets need a lower price at the observed token mix and evidence that the model
+is usable: a recorded run, an existing provider-scoped rule, or the configured
+default target. Without matching prices, the candidate remains available but
+approval requires `--model <id>`. Availability still depends on the active provider.
+SessionStart reads cached candidates and schedules an eligible refresh outside
+the hook. Small log changes refresh at most daily; a 5 MiB increase can refresh
+after an hour. `--refresh` bypasses that schedule.
+
+`seed` offers only compatible ratchet presets, not Claude model-tier presets.
+Accept and skip decisions are separate from Claude. Both seed acceptance and
+route approval require the user's choice of global or project scope. A project
+route is saved for the project where it was observed. Enable delegation with
+`sprag delegate on --agent codex` and trust the hooks before expecting rules to run.
+
+## Reports
+
+### One-Shot Statusline
+
+```sh
+sprag --statusline --agent codex
+sprag --statusline --agent codex --text --no-color --columns 80
+sprag --format statusline --agent codex --session SESSION_ID
+sprag --statusline --agent codex --single-line
+```
+
+This is terminal output, not a shell command installed into Codex's native
+footer. It reads local logs, does not fetch gateway budgets, and exits after
+one frame. Chips wrap to terminal width (100 columns when piped), with an
+explicit `--columns` override. `--single-line` produces one unwrapped line for
+external terminal integrations. It shares `mode text|narrow|icon`, timer, and color
+preferences with the panel; explicit `--text`, `--narrow`, and `--no-color`
+flags are supported, along with `--timer` and `--no-timer`.
+Claude's TTL buckets and routing options do not apply.
+
+### Cache Timer And Display Order
+
+Both panel layouts and the one-shot statusline use a Codex-specific order:
+warnings, usage limits/budget, context, cache timer, model/effort, session
+cache/token totals, Codex lifetime document counts, then harness/preferences and
+version. Session measurements stay together before lifetime totals. Claude's
+statusline order is unchanged.
+
+The cache clock starts from a new recorded cache read or write, not the latest
+tool event, prompt, or repeated quota snapshot. Each session has its own clock;
+changing models invalidates the old model's clock until new cache usage arrives.
+`Cache 29:59 (Bedrock 30m)` uses the documented minimum retention for a resolved
+supported model, not a server expiration timestamp or a promise of a cache hit.
+For LiteLLM, Sprag queries the configured `/model/info` endpoint and checks the
+actual deployment/base model. All deployments behind an alias must agree.
+Only sanitized policy and price fields are persisted; policy freshness is five minutes. Secrets
+and raw deployment records are not stored. The live panel refreshes policies;
+one-shot statuslines remain offline. Unresolved, earlier, or unknown models show
+cache age with `TTL unknown`; no observed cache activity shows `Cache timer n/a`.
+The tilde and old unverified-policy labels are removed. After the window passes, the display
+says `window elapsed` and `expiry unknown`, never `EXPIRED`.
+
+```sh
+sprag cache status --agent codex
+sprag cache status --refresh --agent codex
+sprag cache 30m --agent codex
+sprag cache auto --agent codex
+sprag cache off --agent codex
+sprag --statusline --agent codex --no-timer
+```
+
+A configured duration (1 minute through 24 hours) changes only Sprag's display
+estimate, not the request or provider retention. It is stored separately from
+Claude's `mode ttl=5m|1h|auto`. The shared `mode no-timer` also hides the Codex
+clock; `--timer` overrides that preference, but not `cache off`.
+
+### Routing Saved
+
+```sh
+sprag route-scan savings --refresh --agent codex
+sprag route-scan savings --format json --agent codex
+```
+
+The separate Codex ledger joins a route ID recorded by Sprag at spawn time to
+the child's own rollout. An explicit model choice or an unrelated cheaper
+subagent earns no credit. The estimate holds the child's measured tokens
+constant and prices them at the parent and child rates. Negative differences
+remain negative; this is not a comparison of actual billed totals.
+
+Rates come from the configured LiteLLM `/model/info` endpoint, with agreement
+required across deployments behind an alias. Price snapshots last seven days.
+Providers are kept separate; direct OpenAI/subscription pricing is not inferred.
+Missing rates or usage produce unpriced entries, never invented zeroes. A priced
+entry keeps its rate snapshot across later outages. Pending route records are
+matched for seven days; saved ledger entries remain afterward. Run `--refresh`
+after delegation to update the ledger without waiting for the next route scan.
+
+Claude's ledger is never imported. Document conversion shows distinct document
+counts rather than a Codex dollar saving or billing measurement.
+
+### Live Companion Panel
+
+Codex 0.157.1 was observed to defer SessionStart until the first submitted prompt,
+even after hook trust is granted. Installation now adds this shell integration by
+default on macOS zsh; to install or remove it manually:
+
+```sh
+sprag panel shell install --agent codex
+```
+
+Install tmux first (`brew install tmux` on macOS), then open a new terminal.
+This adds a backed-up, marked function to `$ZDOTDIR/.zshrc` (or `~/.zshrc`).
+Interactive Codex runs above a compact Sprag panel in the SAME terminal.
+An isolated tmux server leaves existing tmux sessions and configuration alone.
+Each inline launch has its own session binding. The runner adds `--no-daemon`
+so the trusted SessionStart hook receives that launch's environment instead of
+a shared app-server's environment. The hook supplies the exact session ID and
+transcript path; another active session in the same project cannot take over
+the panel. Before the hook runs, the panel shows **Waiting for session binding**,
+not another session's usage. On versions that defer SessionStart, submit the
+first prompt to bind the panel. Install and trust the Sprag SessionStart hook
+to enable binding; disabling hooks leaves the panel waiting.
+Resume, clear, and compaction hooks refresh the binding. Each compact frame
+identifies its session by the last eight ID characters. Inline remote-server
+invocations are rejected because their hook environment and logs are not local;
+use standalone Codex and an explicitly pinned panel with accessible local logs.
+Codex arguments and exit status are preserved. The inline runner prepends
+`-c 'tui.status_line=[]'` so Codex's model/effort/directory row does not duplicate
+the Sprag panel. This is an invocation-only override: it does not edit
+`config.toml`, change the model or effort, or affect standalone Codex runs.
+Codex's startup banner, shortcut hints, approval prompts, and other notices
+remain visible. To keep the native row, run
+`sprag panel run --agent codex --keep-native-statusline --` followed by Codex
+arguments. An explicit later Codex `-c 'tui.status_line=["current-dir"]'` also
+overrides Sprag's default. Restart the inline session to apply a runner update.
+Exiting Codex closes the panel;
+detaching also ends this temporary session. For explicit launch without shell
+integration, run `sprag panel run --agent codex --` followed by Codex arguments.
+An existing codex alias/function is not overwritten. It does not bypass hook
+trust: it starts the local display independently. The panel-start hook skips
+opening a separate window inside this layout. Remove the shell function with
+`sprag panel shell remove --agent codex` and open a new terminal.
+The shell integration currently targets common plain, prompt, and resume
+invocations; use the explicit panel command for unusual global-option/subcommand
+combinations. Non-TTY invocations and recognized utility commands do not open windows.
+
+On macOS, enable automatic opening when Codex starts or resumes:
+
+```sh
+sprag panel auto on --agent codex
+sprag panel --open --agent codex
+```
+
+The first command registers a separate `panel-start` SessionStart hook. Review
+and trust that new hook in Codex `/hooks`, then restart or resume Codex. It opens
+a macOS Terminal window pinned to the hook's session ID; only a panel for that
+same session and Codex home is reused. Concurrent sessions get separate windows.
+Reused windows are unminimized, their panel tab is selected, and Terminal is
+brought forward so a background panel does not look like a failed launch.
+Clear and compaction events do not open windows. macOS may request Terminal
+automation permission. Codex's native footer is unchanged. Disable automatic
+opening with `sprag panel auto off --agent codex`; check registration with
+`sprag panel auto status --agent codex`. Reinstall preserves this preference.
+`--open --session SESSION_ID` opens or reuses a pinned window immediately.
+Without `--session`, `--open` creates a project-following window. Other platforms use a manual
+terminal or tmux split as below. Hook trust is never bypassed by Sprag.
+
+Run this in a separate terminal window or a tmux split alongside Codex:
+
+```sh
+sprag panel --agent codex
+sprag panel --agent codex --project /path/to/repo
+sprag panel --agent codex --session SESSION_ID --interval 2
+sprag panel --agent codex --once --no-color
+```
+
+The manually launched panel refreshes every two seconds and follows the latest main session in
+the current project (including subdirectories and filesystem path aliases).
+Subagent rollouts do not replace the main display. `--session` pins an exact
+session ID, including a child when explicitly selected. Pinned and bound sessions
+are looked up even when their logs are older than seven days or have been archived.
+`--days` controls project-following discovery (default seven days). `--project` is a directory
+path in panel mode, not the report's substring filter. Press `r` to refresh and
+`q` or Ctrl-C to exit. The terminal's screen and cursor are restored on exit.
+Piped output requires `--once` so scripts cannot accidentally start an endless loop.
+Use `sprag panel doctor --agent codex --session SESSION_ID` to inspect rendering
+for one session; without an ID, diagnostics show the last project-wide activity.
+
+The display shows model/effort, recorded working/idle/interrupted state when
+available, latest recorded input context, cache hit rate,
+session token totals, recorded rate-limit gauges/reset times, harness score,
+ratchet counts, hook registration, and Korean/cohesion/doc2md/brief/delegate
+preferences. Preference labels do not claim
+that hooks are trusted. Logs older than five minutes are marked stale. Reset
+times that have elapsed are marked as awaiting a new usage event, not zero usage.
+Unreported limits, session cost, exact cache expiry, and unpriced routing estimates remain unknown.
+Non-ASCII dynamic labels are replaced with `?` to maintain terminal cell widths.
+
+The inline compact panel reuses Claude's icon/narrow/text preferences and
+segmented gauges. Chips wrap as units instead of losing their trailing values;
+the pane grows with the content while keeping at least ten rows for Codex.
+If the terminal is too small, a remaining-row count marks hidden content.
+Cache reuse is shown in tokens, not an inferred dollar saving. Document counts
+and format breakdowns come from Codex's own document records and are labelled
+`Codex total`; Claude-based dollar estimates are not attributed to Codex.
+Unavailable cost and limit placeholders are hidden in compact mode. Cache timer
+availability and unpriced routing accounting remain explicit.
+
+The panel is a separate terminal UI, not an injection into Codex's native footer.
+It consumes local rollout logs without invoking a model or modifying Codex config.
+For a configured LiteLLM provider, the existing budget reader also queries that
+provider's budget and model-info endpoints, using its configured environment key or auth helper.
+Both full and compact views show a returned budget, with its source and freshness,
+separately from unavailable per-session cost. Document counts cover Codex history
+in both views; Claude dollar-saving estimates are excluded.
+Unchanged files are cached for the panel's lifetime; changed logs are reparsed.
+
+```sh
+sprag --agent codex --days 7
+sprag --agent codex --hours 6 --format json
+sprag --agent codex --project my-project --format csv
+sprag --agent codex --session SESSION_ID --format json
+```
+
+Sprag reads `.jsonl` files under `$CODEX_HOME/sessions` and
+`$CODEX_HOME/archived_sessions`, not `history.jsonl`. The project filter matches
+the session metadata's working directory. Usage is filtered within each session,
+not just by file modification time. A session without token-count records does
+not appear in the report.
+
+Cumulative token-count deltas prevent repeated usage events from being counted
+twice. Cached input is included in total input, and reasoning is included in
+output; neither subset is added twice. Usage updates are **not an exact API call
+count**. JSON retains the existing summary field `apiCalls` for compatibility,
+but its Codex value counts usage updates. Context size comes from recorded
+`last_token_usage`, not Claude's 200k/1M heuristic.
+The top-level JSON field `usageUpdates` names that count explicitly.
+
+Rollout JSONL is not a stable public Codex interface. Missing or malformed records
+are skipped, and incomplete/copied/reset logs can only give best-effort totals.
+Reports show **cost and exact cache TTL as unavailable** (`null` in JSON). They do not
+apply Anthropic prices, infer subscription charges, or claim Claude's cache TTL.
+Document counts are not a measurement of Codex billing or avoided tokens.
+
+## Limits And Removal
+
+Claude's cap/TTL heuristics, Haiku/Sonnet tier presets, and the Claude
+`compact-window` command do not apply to Codex. Codex provides its own
+`model_auto_compact_token_limit` setting; Sprag does not apply Claude's 1M
+heuristic or change that setting. Codex's native `tui.status_line` accepts
+item identifiers, not a Sprag shell command. Unsupported integration commands
+fail explicitly rather than modifying Claude settings.
+
+Use `sprag panel --agent codex` for the live display or
+`sprag --statusline --agent codex` for one-shot terminal output.
+Rate-limit gauges use Codex's recorded values only. Run
+`sprag capabilities --agent codex` for the complete support matrix.
+
+```sh
+sprag uninstall --agent codex
+```
+
+Removal takes out Sprag's Codex hooks and global harness block. It keeps project
+harnesses, ratchet rules, backups, other hooks, and shared Sprag state.
+`--purge` is intentionally unsupported for Codex. Remove a project block with
+`sprag harness uninit --agent codex --project` in that project.
+
+Normal npm upgrades still run the package's Claude postinstall. Codex-only users
+should keep using `npm i -g sprag-cli --ignore-scripts` followed by
+`sprag install --agent codex` when upgrading.
+
+## Official References
+
+- [Codex hooks, event schemas, and trust](https://developers.openai.com/codex/hooks/)
+- [AGENTS.md discovery and overrides](https://developers.openai.com/codex/guides/agents-md/)
+- [Codex configuration reference](https://developers.openai.com/codex/config-reference/)
+- [Prompt cache lifetime](https://developers.openai.com/api/docs/guides/prompt-caching#cache-lifetime)
+- [Codex subagent configuration](https://developers.openai.com/codex/subagents/)

package/examples/statusline-command.ps1

@@ -1,9 +1,9 @@
 # Claude Code statusline (Windows PowerShell version)
 # Mirrors the POSIX sh script — prints "user@host:cwd" then appends
-# claude-token-saver output as a second segment.
+# sprag output as a second segment.
 #
 # Install:
-#   1) npm install -g claude-token-saver
+#   1) npm install -g sprag-cli
 #   2) Save this file as: %USERPROFILE%\.claude\statusline-command.ps1
 #   3) In %USERPROFILE%\.claude\settings.json add:
 #      {
@@ -30,14 +30,20 @@ Write-Host -NoNewline "$esc[01;32m$env:USERNAME@$env:COMPUTERNAME$esc[00m`:$esc[
 # 2) cache monitor (appended). Separator " | ". Falls back silently.
 Write-Host -NoNewline " $esc[90m|$esc[00m "
 
-$cacheMonitor = Get-Command claude-token-saver -ErrorAction SilentlyContinue
+# `claude-token-saver` is the older binary name, still installed by the current
+# package; the npx fallback names `sprag-cli`, since the old package name is
+# deprecated on npm and would fetch a version that stopped receiving releases.
+$cacheMonitor = Get-Command sprag -ErrorAction SilentlyContinue
+if (-not $cacheMonitor) {
+  $cacheMonitor = Get-Command claude-token-saver -ErrorAction SilentlyContinue
+}
 if ($cacheMonitor) {
   try {
-    & claude-token-saver --statusline --icon 2>$null
+    & $cacheMonitor.Name --statusline --icon 2>$null
   } catch { }
 } else {
   # fallback: npx (first run downloads the package; subsequent runs are warm)
   try {
-    & npx --yes claude-token-saver@latest --statusline --icon 2>$null
+    & npx --yes sprag-cli@latest --statusline --icon 2>$null
   } catch { }
 }

package/examples/statusline-command.sh

@@ -1,9 +1,9 @@
 #!/bin/sh
 # Claude Code statusline (POSIX sh — works on macOS, Linux, and WSL)
-# Prints "user@host:cwd" then appends claude-token-saver as a second segment.
+# Prints "user@host:cwd" then appends sprag as a second segment.
 #
 # Install:
-#   1) npm install -g claude-token-saver
+#   1) npm install -g sprag-cli
 #   2) Save this file as: ~/.claude/statusline-command.sh
 #      chmod +x ~/.claude/statusline-command.sh  (optional)
 #   3) In ~/.claude/settings.json:
@@ -29,8 +29,13 @@ printf '\033[01;32m%s@%s\033[00m:\033[01;34m%s\033[00m' "$(whoami)" "$(hostname
 
 # 2) cache monitor (appended). Separator " | ". Falls back silently.
 printf ' \033[90m|\033[00m '
-if command -v claude-token-saver >/dev/null 2>&1; then
+# `claude-token-saver` is the older binary name, still installed by the current
+# package; the npx fallback names `sprag-cli`, since the old package name is
+# deprecated on npm and would fetch a version that stopped receiving releases.
+if command -v sprag >/dev/null 2>&1; then
+  sprag --statusline --icon 2>/dev/null || true
+elif command -v claude-token-saver >/dev/null 2>&1; then
   claude-token-saver --statusline --icon 2>/dev/null || true
 else
-  npx --yes claude-token-saver@latest --statusline --icon 2>/dev/null || true
+  npx --yes sprag-cli@latest --statusline --icon 2>/dev/null || true
 fi

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "claude-token-saver",
-  "version": "3.44.0",
+  "version": "3.55.0",
   "description": "Legacy name of sprag-cli (Sprag) - same tool, kept publishing so existing installs stay current. Prefer: npm i -g sprag-cli",
   "type": "module",
   "bin": {
@@ -8,11 +8,14 @@
     "claude-token-saver": "bin/cli.js"
   },
   "scripts": {
-    "test": "node --test",
+    "deploy": "node scripts/deploy.mjs",
     "docs:statusline": "node scripts/docs-statusline.mjs",
     "postinstall": "node bin/cli.js install || true",
     "publish:legacy": "node scripts/publish-legacy.mjs",
-    "sync:ko": "node scripts/sync-readme-ko.mjs"
+    "release:notes": "node scripts/release-notes.mjs",
+    "site:docs": "node scripts/build-site-docs.mjs",
+    "test": "node --test",
+    "version": "node scripts/sync-site-version.mjs"
   },
   "files": [
     "bin/",
@@ -21,7 +24,10 @@
     "examples/",
     "README.md",
     "README.ko.md",
-    "LICENSE"
+    "docs/CODEX.md",
+    "docs/CODEX.ko.md",
+    "LICENSE",
+    "NOTICE"
   ],
   "engines": {
     "node": ">=18"
@@ -33,6 +39,9 @@
     "ai-agent",
     "claude",
     "claude-code",
+    "codex",
+    "openai-codex",
+    "agents-md",
     "anthropic",
     "model-routing",
     "llm-router",
@@ -40,6 +49,8 @@
     "subagent",
     "haiku",
     "cost-savings",
+    "token-saver",
+    "reduce-tokens",
     "token-usage",
     "prompt-caching",
     "cache",
@@ -51,7 +62,7 @@
     "model-fitting",
     "agent-harness"
   ],
-  "license": "MIT",
+  "license": "Apache-2.0",
   "repository": {
     "type": "git",
     "url": "git+https://github.com/rootstudioyaml/sprag.git"
@@ -60,5 +71,8 @@
   "bugs": {
     "url": "https://github.com/rootstudioyaml/sprag/issues"
   },
-  "author": "DeepPulse (https://www.youtube.com/@DeepPulseKR)"
+  "author": "DeepPulse (https://www.youtube.com/@DeepPulseKR)",
+  "dependencies": {
+    "smol-toml": "^1.9.0"
+  }
 }

package/presets/delegation/bounds.md

@@ -0,0 +1,29 @@
+# Delegation bounds
+
+You were spawned by a delegation call from another session. These four rules
+keep your exploration finite and your output usable by the caller that spawned
+you, regardless of what the rest of your prompt asks for.
+
+1. **Stop at the cap, report what you finished.** If you are about to exceed
+   the tool-call cap for this delegation, or a call fails and retrying would
+   put you over it, stop where you are and report only the work you actually
+   completed. The caller runs at a higher tier and can pick up from a partial
+   result; pushing past the cap spends tokens nobody asked you to spend.
+
+2. **Decide the output shape first, then only fill it.** Settle the form your
+   answer should take before you start writing, and answer exactly what was
+   asked in that form. Do not grow extra steps, alternatives, or caveats the
+   caller never requested — the caller is paying for a finished answer to its
+   question, not for the task to be widened on your own initiative.
+
+3. **State what you could not verify; never guess in its place.** When a fact
+   is out of reach — a file you could not read, a command you could not run —
+   say so plainly instead of filling the gap with a plausible-sounding guess.
+   A guess presented as a fact is worse than a stated unknown, because once it
+   merges into the caller's context there is no way left to tell them apart.
+
+4. **Back every claim with a path, a line number, or a command you ran.** Cite
+   the file and line, or paste the command output, rather than paraphrasing
+   from memory. A citation lets the caller check your claim in one step; an
+   unattributed claim forces the caller to redo the very search you were
+   delegated to save it from doing.