claude-evolve 1.7.16 → 1.7.17

package/bin/claude-evolve-ideate

@@ -978,7 +978,14 @@ generate_novel_ideas_direct() {
   done
 
   echo "[INFO] Generating $count novel exploration ideas with IDs: $required_ids_str"
-  local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
+
+  # Count total lines in temp CSV (including header)
+  local total_lines
+  total_lines=$(wc -l < "$temp_csv")
+  local read_offset=$((total_lines - 25))
+  if [[ $read_offset -lt 1 ]]; then
+    read_offset=1
+  fi
 
   # Use relative paths and change to evolution directory so AI can access files
   local temp_csv_basename=$(basename "$temp_csv")
@@ -988,6 +995,8 @@ generate_novel_ideas_direct() {
 
   local prompt="I need you to use your file editing capabilities to fill in PLACEHOLDER descriptions in the CSV file: $temp_csv_basename
 
+THE FILE HAS $total_lines TOTAL LINES. Read from line $read_offset to see the placeholder rows at the end.
+
 Current evolution context:
 - Generation: $CURRENT_GENERATION
 - Algorithm: algorithm.py (base algorithm)
@@ -1000,9 +1009,15 @@ The CSV file already contains $count stub rows with these IDs: $required_ids_str
 Each stub row has a PLACEHOLDER description like: \"[PLACEHOLDER: Replace this with your algorithmic idea]\"
 Your job is to REPLACE each PLACEHOLDER with a real algorithmic idea description.
 
+⚠️ CRITICAL FILE READING INSTRUCTIONS ⚠️
+THE CSV FILE IS VERY LARGE (OVER 100,000 TOKENS). YOU WILL RUN OUT OF CONTEXT IF YOU READ IT ALL!
+- DO NOT read the entire file or you will exceed context limits and CRASH
+- Use: Read(file_path='$temp_csv_basename', offset=$read_offset, limit=25)
+- This will read ONLY the last 25 lines where the placeholders are
+- DO NOT READ FROM OFFSET 0 - that will load the entire huge file and fail!
+
 CRITICAL INSTRUCTIONS:
-1. Use the Read tool to examine the CSV file (read from the END to see the placeholder rows)
-   Example: Read the last 20 lines to see the placeholders
+1. Read ONLY the last 20-30 lines of the CSV to see the placeholder rows
 2. DO NOT ADD OR DELETE ANY ROWS - only EDIT the placeholder descriptions
 3. DO NOT CHANGE THE IDs - they are already correct
 4. Use the Edit tool to replace each PLACEHOLDER description with a real idea
@@ -1099,7 +1114,14 @@ generate_hill_climbing_direct() {
   done
 
   echo "[INFO] Generating $count hill climbing ideas with IDs: $required_ids_str"
-  local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
+
+  # Count total lines in temp CSV (including header)
+  local total_lines
+  total_lines=$(wc -l < "$temp_csv")
+  local read_offset=$((total_lines - 25))
+  if [[ $read_offset -lt 1 ]]; then
+    read_offset=1
+  fi
 
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1113,6 +1135,8 @@ generate_hill_climbing_direct() {
 
   local prompt="I need you to use your file editing capabilities to fill in PLACEHOLDER descriptions in the CSV file: $temp_csv_basename
 
+THE FILE HAS $total_lines TOTAL LINES. Read from line $read_offset to see the placeholder rows at the end.
+
 IMPORTANT: You MUST use one of these exact parent IDs: $valid_parent_ids
 
 Successful algorithms to tune:
@@ -1137,8 +1161,15 @@ The CSV file already contains $count stub rows with these IDs: $required_ids_str
 Each stub row has a PLACEHOLDER description like: \"[PLACEHOLDER: Replace with parameter tuning idea]\"
 Your job is to REPLACE each PLACEHOLDER with a real parameter tuning idea.
 
+⚠️ CRITICAL FILE READING INSTRUCTIONS ⚠️
+THE CSV FILE IS VERY LARGE (OVER 100,000 TOKENS). YOU WILL RUN OUT OF CONTEXT IF YOU READ IT ALL!
+- DO NOT read the entire file or you will exceed context limits and CRASH
+- Use: Read(file_path='$temp_csv_basename', offset=$read_offset, limit=25)
+- This will read ONLY the last 25 lines where the placeholders are
+- DO NOT READ FROM OFFSET 0 - that will load the entire huge file and fail!
+
 CRITICAL INSTRUCTIONS:
-1. Use the Read tool to examine the CSV file (read from the END to see the placeholder rows)
+1. Read ONLY the last 25 lines using the offset specified above
 2. DO NOT ADD OR DELETE ANY ROWS - only EDIT the placeholder descriptions
 3. DO NOT CHANGE THE IDs - they are already correct
 4. Use the Edit tool to replace each PLACEHOLDER description with a parameter tuning idea
@@ -1211,7 +1242,14 @@ generate_structural_mutation_direct() {
   done
 
   echo "[INFO] Generating $count structural mutation ideas with IDs: $required_ids_str"
-  local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
+
+  # Count total lines in temp CSV (including header)
+  local total_lines
+  total_lines=$(wc -l < "$temp_csv")
+  local read_offset=$((total_lines - 25))
+  if [[ $read_offset -lt 1 ]]; then
+    read_offset=1
+  fi
 
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1225,6 +1263,8 @@ generate_structural_mutation_direct() {
 
   local prompt="I need you to use your file editing capabilities to fill in PLACEHOLDER descriptions in the CSV file: $temp_csv_basename
 
+THE FILE HAS $total_lines TOTAL LINES. Read from line $read_offset to see the placeholder rows at the end.
+
 IMPORTANT: You MUST use one of these exact parent IDs: $valid_parent_ids
 
 Successful algorithms to modify structurally:
@@ -1241,8 +1281,15 @@ The CSV file already contains $count stub rows with these IDs: $required_ids_str
 Each stub row has a PLACEHOLDER description like: \"[PLACEHOLDER: Replace with structural modification idea]\"
 Your job is to REPLACE each PLACEHOLDER with a real structural modification idea.
 
+⚠️ CRITICAL FILE READING INSTRUCTIONS ⚠️
+THE CSV FILE IS VERY LARGE (OVER 100,000 TOKENS). YOU WILL RUN OUT OF CONTEXT IF YOU READ IT ALL!
+- DO NOT read the entire file or you will exceed context limits and CRASH
+- Use: Read(file_path='$temp_csv_basename', offset=$read_offset, limit=25)
+- This will read ONLY the last 25 lines where the placeholders are
+- DO NOT READ FROM OFFSET 0 - that will load the entire huge file and fail!
+
 CRITICAL INSTRUCTIONS:
-1. Use the Read tool to examine the CSV file (read from the END to see the placeholder rows)
+1. Read ONLY the last 25 lines using the offset specified above
 2. DO NOT ADD OR DELETE ANY ROWS - only EDIT the placeholder descriptions
 3. DO NOT CHANGE THE IDs - they are already correct
 4. Use the Edit tool to replace each PLACEHOLDER description with a structural modification idea
@@ -1314,7 +1361,14 @@ generate_crossover_direct() {
   done
 
   echo "[INFO] Generating $count crossover hybrid ideas with IDs: $required_ids_str"
-  local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
+
+  # Count total lines in temp CSV (including header)
+  local total_lines
+  total_lines=$(wc -l < "$temp_csv")
+  local read_offset=$((total_lines - 25))
+  if [[ $read_offset -lt 1 ]]; then
+    read_offset=1
+  fi
 
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1328,6 +1382,8 @@ generate_crossover_direct() {
 
   local prompt="I need you to use your file editing capabilities to fill in PLACEHOLDER descriptions in the CSV file: $temp_csv_basename
 
+THE FILE HAS $total_lines TOTAL LINES. Read from line $read_offset to see the placeholder rows at the end.
+
 IMPORTANT: You MUST use ONLY these exact parent IDs: $valid_parent_ids
 
 Top performers to combine (reference at least 2 in each idea):
@@ -1344,8 +1400,15 @@ The CSV file already contains $count stub rows with these IDs: $required_ids_str
 Each stub row has a PLACEHOLDER description like: \"[PLACEHOLDER: Replace with crossover hybrid idea]\"
 Your job is to REPLACE each PLACEHOLDER with a real crossover/hybrid idea that combines 2+ algorithms.
 
+⚠️ CRITICAL FILE READING INSTRUCTIONS ⚠️
+THE CSV FILE IS VERY LARGE (OVER 100,000 TOKENS). YOU WILL RUN OUT OF CONTEXT IF YOU READ IT ALL!
+- DO NOT read the entire file or you will exceed context limits and CRASH
+- Use: Read(file_path='$temp_csv_basename', offset=$read_offset, limit=25)
+- This will read ONLY the last 25 lines where the placeholders are
+- DO NOT READ FROM OFFSET 0 - that will load the entire huge file and fail!
+
 CRITICAL INSTRUCTIONS:
-1. Use the Read tool to examine the CSV file (read from the END to see the placeholder rows)
+1. Read ONLY the last 25 lines using the offset specified above
 2. DO NOT ADD OR DELETE ANY ROWS - only EDIT the placeholder descriptions
 3. DO NOT CHANGE THE IDs - they are already correct
 4. Use the Edit tool to replace each PLACEHOLDER description with a crossover idea

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "claude-evolve",
-  "version": "1.7.16",
+  "version": "1.7.17",
   "bin": {
     "claude-evolve": "./bin/claude-evolve",
     "claude-evolve-main": "./bin/claude-evolve-main",