claude-evolve 1.7.0 → 1.7.3

package/bin/claude-evolve-ideate

@@ -103,7 +103,6 @@ call_ai_for_ideation() {
     original_csv_count=0
   fi
   
-  echo "[DEBUG] Original CSV has $original_csv_count data rows" >&2
   
   # Get models for ideation
   local model_list
@@ -132,17 +131,25 @@ call_ai_for_ideation() {
   # Try each model until CSV changes
   for model in "${ordered_models[@]}"; do
     echo "[AI] Attempting ideate with $model" >&2
-    
+
+    # Restore temp CSV before each attempt (in case previous model corrupted it)
+    # This ensures each model starts with the original data
+    if [[ -f "$FULL_CSV_PATH" ]]; then
+      cp "$FULL_CSV_PATH" "$temp_csv_file"
+      # Recapture original count in case it changed
+      original_csv_count=$(grep -v '^[[:space:]]*$' "$temp_csv_file" | tail -n +2 | wc -l)
+    fi
+
     # Call the model directly
     local ai_output
     ai_output=$(call_ai_model_configured "$model" "$prompt")
     local ai_exit_code=$?
-    
+
     # Check if the file was modified - this is ALL that matters
     if [[ -f "$temp_csv_file" ]]; then
       local new_csv_count
       new_csv_count=$(grep -v '^[[:space:]]*$' "$temp_csv_file" | tail -n +2 | wc -l)
-      
+
       if [[ $new_csv_count -gt $original_csv_count ]]; then
         echo "[INFO] CSV was modified by $model ($new_csv_count vs $original_csv_count rows) - validating format..." >&2
         
@@ -162,7 +169,6 @@ call_ai_for_ideation() {
         return 0
       else
         echo "[INFO] CSV unchanged after $model (exit code: $ai_exit_code)" >&2
-        echo "[DEBUG] Original count: $original_csv_count, New count: $new_csv_count" >&2
         # Continue to next model
       fi
     else
@@ -343,14 +349,10 @@ validate_direct_csv_modification() {
   local new_count
   new_count=$(grep -v '^[[:space:]]*$' "$temp_csv" | tail -n +2 | wc -l)
   
-  echo "[DEBUG] Current main CSV data rows: $current_original_count" >&2
-  echo "[DEBUG] Modified temp CSV data rows: $new_count" >&2
-  echo "[DEBUG] Expected to add: $expected_count ideas" >&2
   
   # Check if AI overwrote the file instead of appending
   if [[ $new_count -lt $current_original_count ]]; then
     echo "[ERROR] AI overwrote the CSV file instead of appending ($new_count < $current_original_count)" >&2
-    echo "[DEBUG] First 10 lines of CSV after AI attempt:" >&2
     head -10 "$temp_csv" >&2
     return 1
   fi
@@ -358,7 +360,6 @@ validate_direct_csv_modification() {
   # Check if no changes were made
   if [[ $new_count -eq $current_original_count ]]; then
     echo "[ERROR] CSV file wasn't modified - same number of data rows ($new_count = $current_original_count)" >&2
-    echo "[DEBUG] First 10 lines of CSV after AI attempt:" >&2
     head -10 "$temp_csv" >&2
     return 1
   fi
@@ -399,7 +400,6 @@ validate_direct_csv_modification() {
     # Update each new row with the model that generated it
     for id in $new_ids; do
       if [[ -n "$id" && "$id" != "id" ]]; then
-        echo "[DEBUG] Updating $id with idea-LLM = $ai_model" >&2
         "$PYTHON_CMD" "$SCRIPT_DIR/../lib/evolution_csv.py" "$FULL_CSV_PATH" field "$id" "idea-LLM" "$ai_model" || echo "[WARN] Failed to update $id" >&2
       fi
     done
@@ -422,7 +422,6 @@ validate_and_apply_csv_modification_old() {
   # Check if the response looks like an error message (but not if it's just CSV data containing these words)
   if echo "$modified_csv" | head -1 | grep -q "id,basedOnId,description,performance,status"; then
     # This looks like a CSV file, not an error message
-    echo "[DEBUG] AI returned what appears to be a CSV file" >&2
   elif echo "$modified_csv" | grep -qi "error\|failed\|limit\|exceeded\|sorry\|cannot\|unable"; then
     echo "[ERROR] AI failed to modify CSV and returned an error message:" >&2
     echo "$modified_csv" | head -200 >&2
@@ -443,12 +442,10 @@ validate_and_apply_csv_modification_old() {
   if [[ -n "$csv_start_line" ]]; then
     # Extract CSV starting from the header line
     modified_csv=$(echo "$modified_csv" | tail -n +$csv_start_line)
-    echo "[DEBUG] Found CSV header at line $csv_start_line, extracting from there" >&2
   elif ! echo "$modified_csv" | head -1 | grep -q "id,basedOnId,description,performance,status"; then
     echo "[ERROR] AI failed to return a valid CSV file. Expected CSV with header, but got:" >&2
     echo "$modified_csv" | head -c 500 >&2
     echo "" >&2
-    echo "[DEBUG] The AI was asked to output the complete modified CSV but didn't" >&2
     return 1
   fi
   
@@ -461,13 +458,9 @@ validate_and_apply_csv_modification_old() {
   local new_count
   new_count=$(wc -l < "$temp_csv")
   
-  echo "[DEBUG] Original CSV line count: $original_count" >&2
-  echo "[DEBUG] Modified CSV line count: $new_count" >&2
-  echo "[DEBUG] Expected to add: $expected_count ideas" >&2
   
   if [[ $new_count -le $original_count ]]; then
     echo "[ERROR] Modified CSV doesn't have more entries ($new_count <= $original_count)" >&2
-    echo "[DEBUG] First 10 lines of modified CSV:" >&2
     head -10 "$temp_csv" >&2
     return 1
   fi
@@ -508,7 +501,6 @@ validate_and_apply_csv_modification_old() {
     # Update each new row with the model that generated it
     for id in $new_ids; do
       if [[ -n "$id" && "$id" != "id" ]]; then
-        echo "[DEBUG] Updating $id with idea-LLM = $ai_model" >&2
         "$PYTHON_CMD" "$SCRIPT_DIR/../lib/evolution_csv.py" "$FULL_CSV_PATH" field "$id" "idea-LLM" "$ai_model" || echo "[WARN] Failed to update $id" >&2
       fi
     done
@@ -532,10 +524,6 @@ process_ai_ideas_direct_old() {
   local temp_csv="$FULL_EVOLUTION_DIR/temp-csv-$$.csv"
   cp "$FULL_CSV_PATH" "$temp_csv"
   
-  echo "[DEBUG] Starting CSV modification for $count $idea_type ideas" >&2
-  echo "[DEBUG] Original CSV path: $FULL_CSV_PATH" >&2
-  echo "[DEBUG] Temp CSV path: $temp_csv" >&2
-  echo "[DEBUG] Original CSV size: $(wc -l < "$FULL_CSV_PATH") lines" >&2
   
   # Build prompt for AI to directly modify the CSV
   local csv_prompt="I need you to add exactly $count new $idea_type ideas to this CSV file.
@@ -598,12 +586,10 @@ IMPORTANT: Output the complete modified CSV file. Do not add any explanation or
   if [[ -n "$csv_start_line" ]]; then
     # Extract CSV starting from the header line
     modified_csv=$(echo "$modified_csv" | tail -n +$csv_start_line)
-    echo "[DEBUG] Found CSV header at line $csv_start_line, extracting from there" >&2
   elif ! echo "$modified_csv" | head -1 | grep -q "id,basedOnId,description,performance,status"; then
     echo "[ERROR] AI failed to return a valid CSV file. Expected CSV with header, but got:" >&2
     echo "$modified_csv" | head -c 500 >&2
     echo "" >&2
-    echo "[DEBUG] The AI was asked to output the complete modified CSV but didn't" >&2
     rm -f "$temp_csv"
     return 1
   fi
@@ -612,11 +598,8 @@ IMPORTANT: Output the complete modified CSV file. Do not add any explanation or
   echo "$modified_csv" > "$temp_csv"
   
   # Debug: Show the AI's CSV modification attempt
-  echo "[DEBUG] AI response length: ${#modified_csv} characters" >&2
-  echo "[DEBUG] First 300 chars of AI response:" >&2
   echo "$modified_csv" | head -c 300 >&2
   echo "" >&2
-  echo "[DEBUG] Last 300 chars of AI response:" >&2
   echo "$modified_csv" | tail -c 300 >&2
   echo "" >&2
   
@@ -626,15 +609,10 @@ IMPORTANT: Output the complete modified CSV file. Do not add any explanation or
   local new_count
   new_count=$(wc -l < "$temp_csv")
   
-  echo "[DEBUG] Original CSV line count: $original_count" >&2
-  echo "[DEBUG] Modified CSV line count: $new_count" >&2
-  echo "[DEBUG] Expected to add: $count ideas" >&2
   
   if [[ $new_count -le $original_count ]]; then
     echo "[ERROR] Modified CSV doesn't have more entries ($new_count <= $original_count)" >&2
-    echo "[DEBUG] Temp CSV contents:" >&2
     cat "$temp_csv" | head -10 >&2
-    echo "[DEBUG] Original CSV contents:" >&2
     cat "$FULL_CSV_PATH" | head -10 >&2
     rm -f "$temp_csv"
     return 1
@@ -901,7 +879,6 @@ generate_novel_ideas_direct() {
   
   echo "[INFO] Generating $count novel exploration ideas..."
   local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
-  echo "[DEBUG] Original CSV has $data_rows data rows" >&2
   
   # Use relative paths and change to evolution directory so AI can access files
   local temp_csv_basename=$(basename "$temp_csv")
@@ -918,6 +895,8 @@ Current evolution context:
 
 CRITICAL INSTRUCTIONS:
 1. Use the Read tool to examine the current CSV file
+   IMPORTANT: If the CSV file is large (>200 lines), read it in chunks using the offset and limit parameters to avoid context overload
+   Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 2. DO NOT DELETE OR REPLACE ANY EXISTING ROWS - YOU MUST PRESERVE ALL EXISTING DATA
 3. Find the highest ID number for generation $CURRENT_GENERATION (e.g., if gen$CURRENT_GENERATION-003 exists, next should be gen$CURRENT_GENERATION-004)
 4. If no gen$CURRENT_GENERATION entries exist yet, start with gen$CURRENT_GENERATION-001"
@@ -949,14 +928,8 @@ CRITICAL: You must use your file editing tools (Edit/MultiEdit) to modify the CS
 CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). Only modify the file directly."
 
   # Debug prompt size and context
-  echo "[DEBUG] Novel ideas prompt length: ${#prompt} characters" >&2
-  echo "[DEBUG] Working dir: $(pwd)" >&2
-  echo "[DEBUG] Evolution dir: $FULL_EVOLUTION_DIR" >&2
-  echo "[DEBUG] Temp CSV: $temp_csv" >&2
   if [[ -f "$temp_csv" ]]; then
-    echo "[DEBUG] Temp CSV exists, size: $(wc -l < "$temp_csv") lines" >&2
   else
-    echo "[DEBUG] Temp CSV does not exist yet" >&2
   fi
 
   # Change to evolution directory so AI can access files
@@ -964,8 +937,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   cd "$FULL_EVOLUTION_DIR"
   
   # Debug: Show files in evolution directory
-  echo "[DEBUG] Current directory: $(pwd)" >&2
-  echo "[DEBUG] Temp CSV exists: $(ls -la "$temp_csv_basename" 2>&1)" >&2
   
   # Get AI to directly edit the CSV file
   local ai_response
@@ -973,10 +944,7 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Temporarily show stderr for debugging
   if ! ai_response=$(call_ai_for_ideation "$prompt" "$CURRENT_GENERATION" "$count" "$temp_csv_basename"); then
     echo "[ERROR] All AI models failed to generate novel ideas" >&2
-    echo "[DEBUG] Stderr output from AI calls:" >&2
     cat "$stderr_file" >&2
-    echo "[DEBUG] Temp CSV location: $temp_csv" >&2
-    echo "[DEBUG] Working directory: $(pwd)" >&2
     cd "$original_pwd"
     rm -f "$temp_csv" "$stderr_file"
     return 1
@@ -986,7 +954,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Restore working directory
   cd "$original_pwd"
   
-  echo "[DEBUG] AI response: $ai_response" >&2
   
   # Validate that the CSV file was actually modified
   if ! validate_direct_csv_modification "$temp_csv" "$count" "novel" "$ai_response"; then
@@ -1009,7 +976,6 @@ generate_hill_climbing_direct() {
   
   echo "[INFO] Generating $count hill climbing ideas..."
   local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
-  echo "[DEBUG] Original CSV has $data_rows data rows" >&2
   
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1030,9 +996,13 @@ $top_performers
 
 OPTIONAL: If needed for context, you may read parent algorithm source files at: evolution_<PARENT_ID>.py
 However, you can often generate good parameter tuning ideas just from the descriptions and performance scores above.
+IMPORTANT: If you read .py files, read them in chunks using offset and limit parameters to avoid context overload
+Example: Read(file_path='evolution_gen01-001.py', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 
 CRITICAL INSTRUCTIONS:
 1. Use the Read tool to examine the current CSV file
+   IMPORTANT: If the CSV file is large (>200 lines), read it in chunks using the offset and limit parameters to avoid context overload
+   Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 2. DO NOT DELETE OR REPLACE ANY EXISTING ROWS - YOU MUST PRESERVE ALL EXISTING DATA
 3. Find the highest ID number for generation $CURRENT_GENERATION (e.g., if gen$CURRENT_GENERATION-003 exists, next should be gen$CURRENT_GENERATION-004)
 4. If no gen$CURRENT_GENERATION entries exist yet, start with gen$CURRENT_GENERATION-001
@@ -1072,7 +1042,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Restore working directory
   cd "$original_pwd"
   
-  echo "[DEBUG] AI response: $ai_response" >&2
   
   # Validate that the CSV file was actually modified
   if ! validate_direct_csv_modification "$temp_csv" "$count" "hill-climbing" "$ai_response"; then
@@ -1095,7 +1064,6 @@ generate_structural_mutation_direct() {
   
   echo "[INFO] Generating $count structural mutation ideas..."
   local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
-  echo "[DEBUG] Original CSV has $data_rows data rows" >&2
   
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1116,9 +1084,13 @@ $top_performers
 
 OPTIONAL: If needed for context, you may read parent algorithm source files at: evolution_<PARENT_ID>.py
 However, you can often generate good structural ideas just from the descriptions and performance scores above.
+IMPORTANT: If you read .py files, read them in chunks using offset and limit parameters to avoid context overload
+Example: Read(file_path='evolution_gen01-001.py', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 
 CRITICAL INSTRUCTIONS:
 1. Use the Read tool to examine the current CSV file
+   IMPORTANT: If the CSV file is large (>200 lines), read it in chunks using the offset and limit parameters to avoid context overload
+   Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 2. DO NOT DELETE OR REPLACE ANY EXISTING ROWS - YOU MUST PRESERVE ALL EXISTING DATA
 3. Find the highest ID number for generation $CURRENT_GENERATION (e.g., if gen$CURRENT_GENERATION-003 exists, next should be gen$CURRENT_GENERATION-004)
 4. If no gen$CURRENT_GENERATION entries exist yet, start with gen$CURRENT_GENERATION-001
@@ -1158,7 +1130,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Restore working directory
   cd "$original_pwd"
   
-  echo "[DEBUG] AI response: $ai_response" >&2
   
   # Validate that the CSV file was actually modified
   if ! validate_direct_csv_modification "$temp_csv" "$count" "structural" "$ai_response"; then
@@ -1181,7 +1152,6 @@ generate_crossover_direct() {
   
   echo "[INFO] Generating $count crossover hybrid ideas..."
   local data_rows=$(grep -v '^[[:space:]]*$' "$FULL_CSV_PATH" | tail -n +2 | wc -l)
-  echo "[DEBUG] Original CSV has $data_rows data rows" >&2
   
   # Get existing Python files for this generation to avoid ID collisions
   local existing_py_files=$(get_existing_py_files_for_generation "$CURRENT_GENERATION")
@@ -1202,9 +1172,13 @@ $top_performers
 
 OPTIONAL: If needed for context, you may read parent algorithm source files at: evolution_<PARENT_ID>.py
 However, you can often generate good hybrid ideas just from the descriptions and performance scores above.
+IMPORTANT: If you read .py files, read them in chunks using offset and limit parameters to avoid context overload
+Example: Read(file_path='evolution_gen01-001.py', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 
 CRITICAL INSTRUCTIONS:
 1. Use the Read tool to examine the current CSV file
+   IMPORTANT: If the CSV file is large (>200 lines), read it in chunks using the offset and limit parameters to avoid context overload
+   Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 2. DO NOT DELETE OR REPLACE ANY EXISTING ROWS - YOU MUST PRESERVE ALL EXISTING DATA
 3. Find the highest ID number for generation $CURRENT_GENERATION (e.g., if gen$CURRENT_GENERATION-003 exists, next should be gen$CURRENT_GENERATION-004)
 4. If no gen$CURRENT_GENERATION entries exist yet, start with gen$CURRENT_GENERATION-001
@@ -1244,7 +1218,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Restore working directory
   cd "$original_pwd"
   
-  echo "[DEBUG] AI response: $ai_response" >&2
   
   # Validate that the CSV file was actually modified
   if ! validate_direct_csv_modification "$temp_csv" "$count" "crossover" "$ai_response"; then
@@ -1268,7 +1241,6 @@ ideate_ai_legacy() {
   cp "$FULL_CSV_PATH" "$temp_csv"
   
   echo "[INFO] Generating $TOTAL_IDEAS ideas (legacy mode)..."
-  echo "[DEBUG] Original CSV has $(wc -l < "$FULL_CSV_PATH") lines" >&2
 
   # Get top performers for context
   local top_performers=""
@@ -1288,7 +1260,9 @@ Current evolution context:
 - Algorithm: algorithm.py (base algorithm)
 - Brief: $(head -10 "$FULL_BRIEF_PATH" 2>/dev/null | head -c 1000 || echo "No brief file found")
 
-IMPORTANT: DO NOT read all evolution files - that uses too many tokens. Just generate creative ideas based on the brief."
+IMPORTANT: DO NOT read all evolution files - that uses too many tokens. Just generate creative ideas based on the brief.
+IMPORTANT: If you read .py or .csv files, read them in chunks using offset and limit parameters to avoid context overload
+Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc."
 
   if [[ -n $top_performers ]]; then
     prompt+="
@@ -1301,6 +1275,8 @@ $top_performers"
 
 CRITICAL INSTRUCTIONS:
 1. Use the Read tool to examine the current CSV file
+   IMPORTANT: If the CSV file is large (>200 lines), read it in chunks using the offset and limit parameters to avoid context overload
+   Example: Read(file_path='temp-csv-123.csv', offset=0, limit=100) then Read(offset=100, limit=100), etc.
 2. DO NOT DELETE OR REPLACE ANY EXISTING ROWS - YOU MUST PRESERVE ALL EXISTING DATA
 3. Find the highest ID number for generation $CURRENT_GENERATION (e.g., if gen$CURRENT_GENERATION-003 exists, next should be gen$CURRENT_GENERATION-004)
 4. If no gen$CURRENT_GENERATION entries exist yet, start with gen$CURRENT_GENERATION-001
@@ -1350,7 +1326,6 @@ CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). On
   # Restore working directory
   cd "$original_pwd"
   
-  echo "[DEBUG] AI response: $ai_response" >&2
   
   # Validate that the CSV file was actually modified
   if ! validate_direct_csv_modification "$temp_csv" "$TOTAL_IDEAS" "mixed" "$ai_response"; then

package/bin/claude-evolve-worker

@@ -276,6 +276,10 @@ The modification should be substantial and follow the description exactly. Make
 
 Important: Make meaningful changes that match the description. Don't just add comments or make trivial adjustments.
 
+IMPORTANT: If you need to read Python (.py) or CSV files, read them in chunks using offset and limit parameters to avoid context overload
+Example: Read(file_path='evolution_gen01-001.py', offset=0, limit=100) then Read(offset=100, limit=100), etc.
+This is especially important for models with smaller context windows (like GLM).
+
 CRITICAL: If you do not know how to implement what was asked for, or if the requested change is unclear or not feasible, you MUST refuse to make any changes. DO NOT modify the code if you are uncertain about the implementation. Simply respond that you cannot implement the requested change and explain why. It is better to refuse than to make incorrect or random changes.
 
 CRITICAL: Do NOT use any git commands (git add, git commit, git reset, etc.). Only modify the file directly."

package/lib/config.sh

@@ -69,7 +69,6 @@ _load_yaml_config() {
     return 0 # File does not exist, nothing to load
   fi
 
-  echo "[DEBUG] Loading configuration from: $config_file" >&2
 
   local in_ideation_section=false
   local in_parallel_section=false
@@ -175,8 +174,6 @@ _load_yaml_config() {
 }
 
 load_config() {
-  echo "[DEBUG] $1 at start of load_config: '$1'" >&2
-  echo "[DEBUG] DEFAULT_EVOLUTION_DIR: $DEFAULT_EVOLUTION_DIR" >&2
   # Set defaults first
   EVOLUTION_DIR="$DEFAULT_EVOLUTION_DIR" # Initialize with default
   ALGORITHM_FILE="$DEFAULT_ALGORITHM_FILE"
@@ -189,18 +186,13 @@ load_config() {
 
   # Determine EVOLUTION_DIR based on specified logic, overriding default if found
   if [[ -n "$CLAUDE_EVOLVE_WORKING_DIR" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by CLAUDE_EVOLVE_WORKING_DIR: $CLAUDE_EVOLVE_WORKING_DIR" >&2
     EVOLUTION_DIR="$CLAUDE_EVOLVE_WORKING_DIR"
   elif [[ -f "evolution/evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by evolution/evolution.csv: evolution" >&2
     EVOLUTION_DIR="evolution"
   elif [[ -f "./evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by ./evolution.csv: ." >&2
     EVOLUTION_DIR="."
   else
-    echo "[DEBUG] EVOLUTION_DIR defaulting to: $DEFAULT_EVOLUTION_DIR" >&2
   fi
-  echo "[DEBUG] EVOLUTION_DIR after initial determination: $EVOLUTION_DIR" >&2
 
   TOTAL_IDEAS="$DEFAULT_TOTAL_IDEAS"
   NOVEL_EXPLORATION="$DEFAULT_NOVEL_EXPLORATION"
@@ -232,7 +224,6 @@ load_config() {
   local global_config_file="$HOME/.config/claude-evolve/config.yaml"
   _load_yaml_config "$global_config_file"
   
-  echo "[DEBUG] EVOLUTION_DIR before FULL_EVOLUTION_DIR calculation: $EVOLUTION_DIR" >&2
   
   # Create full paths - ALL paths are relative to EVOLUTION_DIR
   # Make EVOLUTION_DIR absolute if it\'s relative
@@ -252,7 +243,6 @@ load_config() {
   else
     FULL_OUTPUT_DIR="$FULL_EVOLUTION_DIR"
   fi
-  echo "[DEBUG] FULL_EVOLUTION_DIR at end of load_config: $FULL_EVOLUTION_DIR" >&2
 }
 
 # Validate configuration

package/lib/config.sh.new

@@ -66,7 +66,6 @@ _load_yaml_config() {
     return 0 # File does not exist, nothing to load
   fi
 
-  echo "[DEBUG] Loading configuration from: $config_file" >&2
 
   local in_ideation_section=false
   local in_parallel_section=false
@@ -171,8 +170,6 @@ _load_yaml_config() {
 }
 
 load_config() {
-  echo "[DEBUG] $1 at start of load_config: '$1'" >&2
-  echo "[DEBUG] DEFAULT_EVOLUTION_DIR: $DEFAULT_EVOLUTION_DIR" >&2
   # Set defaults first
   EVOLUTION_DIR="$DEFAULT_EVOLUTION_DIR" # Initialize with default
   ALGORITHM_FILE="$DEFAULT_ALGORITHM_FILE"
@@ -185,18 +182,13 @@ load_config() {
 
   # Determine EVOLUTION_DIR based on specified logic, overriding default if found
   if [[ -n "$CLAUDE_EVOLVE_WORKING_DIR" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by CLAUDE_EVOLVE_WORKING_DIR: $CLAUDE_EVOLVE_WORKING_DIR" >&2
     EVOLUTION_DIR="$CLAUDE_EVOLVE_WORKING_DIR"
   elif [[ -f "evolution/evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by evolution/evolution.csv: evolution" >&2
     EVOLUTION_DIR="evolution"
   elif [[ -f "./evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by ./evolution.csv: ." >&2
     EVOLUTION_DIR="."
   else
-    echo "[DEBUG] EVOLUTION_DIR defaulting to: $DEFAULT_EVOLUTION_DIR" >&2
   fi
-  echo "[DEBUG] EVOLUTION_DIR after initial determination: $EVOLUTION_DIR" >&2
 
   TOTAL_IDEAS="$DEFAULT_TOTAL_IDEAS"
   NOVEL_EXPLORATION="$DEFAULT_NOVEL_EXPLORATION"
@@ -240,7 +232,6 @@ load_config() {
   local global_config_file="$HOME/.config/claude-evolve/config.yaml"
   _load_yaml_config "$global_config_file"
   
-  echo "[DEBUG] EVOLUTION_DIR before FULL_EVOLUTION_DIR calculation: $EVOLUTION_DIR" >&2
   
   # Create full paths - ALL paths are relative to EVOLUTION_DIR
   # Make EVOLUTION_DIR absolute if it\'s relative
@@ -260,7 +251,6 @@ load_config() {
   else
     FULL_OUTPUT_DIR="$FULL_EVOLUTION_DIR"
   fi
-  echo "[DEBUG] FULL_EVOLUTION_DIR at end of load_config: $FULL_EVOLUTION_DIR" >&2
 }
 
 # Validate configuration

package/lib/config_with_ollama.sh

@@ -66,7 +66,6 @@ _load_yaml_config() {
     return 0 # File does not exist, nothing to load
   fi
 
-  echo "[DEBUG] Loading configuration from: $config_file" >&2
 
   local in_ideation_section=false
   local in_parallel_section=false
@@ -171,8 +170,6 @@ _load_yaml_config() {
 }
 
 load_config() {
-  echo "[DEBUG] $1 at start of load_config: '$1'" >&2
-  echo "[DEBUG] DEFAULT_EVOLUTION_DIR: $DEFAULT_EVOLUTION_DIR" >&2
   # Set defaults first
   EVOLUTION_DIR="$DEFAULT_EVOLUTION_DIR" # Initialize with default
   ALGORITHM_FILE="$DEFAULT_ALGORITHM_FILE"
@@ -185,18 +182,13 @@ load_config() {
 
   # Determine EVOLUTION_DIR based on specified logic, overriding default if found
   if [[ -n "$CLAUDE_EVOLVE_WORKING_DIR" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by CLAUDE_EVOLVE_WORKING_DIR: $CLAUDE_EVOLVE_WORKING_DIR" >&2
     EVOLUTION_DIR="$CLAUDE_EVOLVE_WORKING_DIR"
   elif [[ -f "evolution/evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by evolution/evolution.csv: evolution" >&2
     EVOLUTION_DIR="evolution"
   elif [[ -f "./evolution.csv" ]]; then
-    echo "[DEBUG] EVOLUTION_DIR set by ./evolution.csv: ." >&2
     EVOLUTION_DIR="."
   else
-    echo "[DEBUG] EVOLUTION_DIR defaulting to: $DEFAULT_EVOLUTION_DIR" >&2
   fi
-  echo "[DEBUG] EVOLUTION_DIR after initial determination: $EVOLUTION_DIR" >&2
 
   TOTAL_IDEAS="$DEFAULT_TOTAL_IDEAS"
   NOVEL_EXPLORATION="$DEFAULT_NOVEL_EXPLORATION"
@@ -240,7 +232,6 @@ load_config() {
   local global_config_file="$HOME/.config/claude-evolve/config.yaml"
   _load_yaml_config "$global_config_file"
   
-  echo "[DEBUG] EVOLUTION_DIR before FULL_EVOLUTION_DIR calculation: $EVOLUTION_DIR" >&2
   
   # Create full paths - ALL paths are relative to EVOLUTION_DIR
   # Make EVOLUTION_DIR absolute if it\'s relative
@@ -260,7 +251,6 @@ load_config() {
   else
     FULL_OUTPUT_DIR="$FULL_EVOLUTION_DIR"
   fi
-  echo "[DEBUG] FULL_EVOLUTION_DIR at end of load_config: $FULL_EVOLUTION_DIR" >&2
 }
 
 # Validate configuration

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "claude-evolve",
-  "version": "1.7.0",
+  "version": "1.7.3",
   "bin": {
     "claude-evolve": "./bin/claude-evolve",
     "claude-evolve-main": "./bin/claude-evolve-main",