claude-evolve 1.0.18 → 1.0.20

package/bin/claude-evolve-analyze

@@ -81,24 +81,25 @@ while IFS=, read -r id _ desc perf status; do
   ((total++))
 
   case "$status" in
-  "completed") ((completed++)) ;;
+  "complete" | "completed") 
+    ((completed++))
+    # Only count performance for completed runs
+    if [[ -n $perf && $perf != "" ]]; then
+      total_performance=$(echo "$total_performance + $perf" | bc -l 2>/dev/null || echo "$total_performance")
+      ((count_with_performance++))
+
+      # Check if this is the top performer
+      if [[ -z $top_score ]] || (($(echo "$perf > $top_score" | bc -l 2>/dev/null || echo "0"))); then
+        top_score="$perf"
+        top_id="$id"
+        top_desc="$desc"
+      fi
+    fi
+    ;;
   "running") ((running++)) ;;
   "failed" | "timeout" | "interrupted") ((failed++)) ;;
   *) ((pending++)) ;;
   esac
-
-  # Track performance stats
-  if [[ -n $perf && $perf != "" ]]; then
-    total_performance=$(echo "$total_performance + $perf" | bc -l 2>/dev/null || echo "$total_performance")
-    ((count_with_performance++))
-
-    # Check if this is the top performer
-    if [[ -z $top_score ]] || (($(echo "$perf > $top_score" | bc -l 2>/dev/null || echo "0"))); then
-      top_score="$perf"
-      top_id="$id"
-      top_desc="$desc"
-    fi
-  fi
 done <"$csv_file"
 
 # Display summary
@@ -153,17 +154,17 @@ plot "$data_file" using 1:2 with linespoints title "Performance"
 EOF
 
   rm -f "$data_file"
-  echo "Chart saved successfully!"
-
-  # Open chart if requested
-  if [[ $open_chart == true ]]; then
-    if command -v open >/dev/null 2>&1; then
-      open "$output_file"
-    elif command -v xdg-open >/dev/null 2>&1; then
-      xdg-open "$output_file"
-    else
-      echo "[WARN] Cannot open chart automatically. View: $output_file"
-    fi
+  echo "Chart saved to: $output_file"
+
+  # Always try to open chart (not just when --open is used)
+  if command -v open >/dev/null 2>&1; then
+    open "$output_file"
+    echo "Opening chart..."
+  elif command -v xdg-open >/dev/null 2>&1; then
+    xdg-open "$output_file"
+    echo "Opening chart..."
+  else
+    echo "[WARN] Cannot open chart automatically. View: $output_file"
   fi
 else
   if [[ $count_with_performance -eq 0 ]]; then

package/bin/claude-evolve-run

@@ -49,8 +49,27 @@ EOF
   esac
 done
 
-echo "[INFO] Starting evolution run..."
-[[ -n $timeout_seconds ]] && echo "[INFO] Using timeout: ${timeout_seconds} seconds"
+echo "[INFO] Starting continuous evolution run..."
+echo "[INFO] Will continue running until no more pending candidates or 5 consecutive failures"
+[[ -n $timeout_seconds ]] && echo "[INFO] Using timeout: ${timeout_seconds} seconds per evaluation"
+
+# Track consecutive failures
+consecutive_failures=0
+MAX_FAILURES=5
+
+# Track if we should continue after a failure
+should_continue_after_failure() {
+  ((consecutive_failures++))
+  
+  if [[ $consecutive_failures -ge $MAX_FAILURES ]]; then
+    echo "[ERROR] Too many consecutive failures ($consecutive_failures). Stopping evolution run." >&2
+    return 1
+  else
+    echo "[WARN] Failure $consecutive_failures of $MAX_FAILURES. Continuing to next candidate..." >&2
+    echo "----------------------------------------"
+    return 0
+  fi
+}
 
 # Validate workspace using config
 if [[ ! -d "$FULL_EVOLUTION_DIR" ]]; then
@@ -119,11 +138,13 @@ update_csv_row() {
   mv "$temp_file" "$FULL_CSV_PATH"
 }
 
-# Find next candidate
-if ! row_num=$(find_empty_row); then
-  echo "[ERROR] No pending candidates found in CSV. Run 'claude-evolve ideate' to add more candidates." >&2
-  exit 1
-fi
+# Main evolution loop
+while true; do
+  # Find next candidate
+  if ! row_num=$(find_empty_row); then
+    echo "[INFO] No more pending candidates found. Evolution run complete!"
+    exit 0
+  fi
 
 # Get row data
 row_data=$(get_csv_row "$row_num")
@@ -157,7 +178,11 @@ else
   if [[ ! -f $parent_file ]]; then
     echo "[ERROR] Parent algorithm file not found: $parent_file" >&2
     update_csv_row "$row_num" "" "failed"
-    exit 1
+    if should_continue_after_failure; then
+      continue
+    else
+      exit 1
+    fi
   fi
 fi
 
@@ -192,11 +217,11 @@ if [ $((LOOP_COUNTER % 4)) -eq 0 ]; then
   echo -e "\033[33m**** MEGATHINKING MODE ACTIVATED ****\033[0m"
   CLAUDE_MODEL="opus"
   MEGATHINK_PREFIX="megathink: "
-  echo "[INFO] Using Claude Opus for architectural thinking (iteration $LOOP_COUNTER)"
+  echo "[INFO] Using Claude Opus for architectural thinking"
 else
   CLAUDE_MODEL="sonnet"
   MEGATHINK_PREFIX=""
-  echo "[INFO] Using Claude Sonnet for development (iteration $LOOP_COUNTER)"
+  echo "[INFO] Using Claude Sonnet for development"
 fi
 
 # Increment and save counter
@@ -228,24 +253,18 @@ if [[ $id == "000" || $id == "0" ]]; then
   echo "[INFO] Baseline algorithm - skipping mutation, using original"
 else
   echo "[INFO] Calling Claude $CLAUDE_MODEL to apply mutation..."
-  echo "[DEBUG] Claude command: $claude_cmd --model $CLAUDE_MODEL -p"
-  
-  # Save prompt to temp file for debugging
-  local prompt_file="/tmp/claude-evolve-prompt-$$.txt"
-  echo "$prompt" > "$prompt_file"
-  echo "[DEBUG] Prompt saved to: $prompt_file ($(wc -l < "$prompt_file") lines)"
   
-  # Try with explicit pipe and error capture - NEED -p flag for piped input!
   if ! generated_code=$(echo "$prompt" | "$claude_cmd" --model $CLAUDE_MODEL -p 2>&1); then
     echo "[ERROR] Claude failed to generate algorithm mutation" >&2
     echo "[ERROR] Claude output: $generated_code" >&2
-    rm -f "$prompt_file"
     update_csv_row "$row_num" "" "failed"
-    exit 1
+    if should_continue_after_failure; then
+      continue
+    else
+      exit 1
+    fi
   fi
   
-  rm -f "$prompt_file"
-  
   # Save generated algorithm (overwrite the copied file)
   echo "$generated_code" >"$output_file"
   echo "[INFO] Claude successfully mutated algorithm"
@@ -268,7 +287,11 @@ if [[ -n $timeout_seconds ]]; then
     if [[ $eval_exit_code -eq 124 ]]; then
       echo "[ERROR] Evaluation timed out after ${timeout_seconds} seconds" >&2
       update_csv_row "$row_num" "" "timeout"
-      exit 1
+      if should_continue_after_failure; then
+        continue 2  # Continue outer while loop from nested context
+      else
+        exit 1
+      fi
     fi
   fi
 else
@@ -303,20 +326,37 @@ if [[ $eval_exit_code -eq 0 ]]; then
         echo "[ERROR] No score found in evaluator output" >&2
         echo "[ERROR] Output: $eval_output" >&2
         update_csv_row "$row_num" "" "failed"
-        exit 1
+        if should_continue_after_failure; then
+          continue 2
+        else
+          exit 1
+        fi
       fi
     fi
   else
     echo "[ERROR] Failed to parse evaluator output" >&2
     echo "[ERROR] Output: $eval_output" >&2
     update_csv_row "$row_num" "" "failed"
-    exit 1
+    if should_continue_after_failure; then
+      continue
+    else
+      exit 1
+    fi
   fi
 else
   echo "[ERROR] Evaluator failed with exit code $eval_exit_code" >&2
   echo "[ERROR] Output: $eval_output" >&2
   update_csv_row "$row_num" "" "failed"
-  exit 1
+  if should_continue_after_failure; then
+    continue
+  else
+    exit 1
+  fi
 fi
 
-echo "[INFO] Evolution cycle completed successfully!"
+  echo "[INFO] Evolution cycle completed successfully!"
+  consecutive_failures=0  # Reset failure counter on success
+  
+  echo "[INFO] Looking for next candidate..."
+  echo "----------------------------------------"
+done  # End of main evolution loop

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "claude-evolve",
-  "version": "1.0.18",
+  "version": "1.0.20",
   "bin": {
     "claude-evolve": "./bin/claude-evolve",
     "claude-evolve-main": "./bin/claude-evolve-main",