claude-all-hands 1.0.0 → 1.0.1

package/.claude/envoy/.venv/lib/python3.9/site-packages/websockets/sync/messages.py

@@ -1,345 +0,0 @@
-from __future__ import annotations
-
-import codecs
-import queue
-import threading
-from typing import Any, Callable, Iterable, Iterator, Literal, overload
-
-from ..exceptions import ConcurrencyError
-from ..frames import OP_BINARY, OP_CONT, OP_TEXT, Frame
-from ..typing import Data
-from .utils import Deadline
-
-
-__all__ = ["Assembler"]
-
-UTF8Decoder = codecs.getincrementaldecoder("utf-8")
-
-
-class Assembler:
-    """
-    Assemble messages from frames.
-
-    :class:`Assembler` expects only data frames. The stream of frames must
-    respect the protocol; if it doesn't, the behavior is undefined.
-
-    Args:
-        pause: Called when the buffer of frames goes above the high water mark;
-            should pause reading from the network.
-        resume: Called when the buffer of frames goes below the low water mark;
-            should resume reading from the network.
-
-    """
-
-    def __init__(
-        self,
-        high: int | None = None,
-        low: int | None = None,
-        pause: Callable[[], Any] = lambda: None,
-        resume: Callable[[], Any] = lambda: None,
-    ) -> None:
-        # Serialize reads and writes -- except for reads via synchronization
-        # primitives provided by the threading and queue modules.
-        self.mutex = threading.Lock()
-
-        # Queue of incoming frames.
-        self.frames: queue.SimpleQueue[Frame | None] = queue.SimpleQueue()
-
-        # We cannot put a hard limit on the size of the queue because a single
-        # call to Protocol.data_received() could produce thousands of frames,
-        # which must be buffered. Instead, we pause reading when the buffer goes
-        # above the high limit and we resume when it goes under the low limit.
-        if high is not None and low is None:
-            low = high // 4
-        if high is None and low is not None:
-            high = low * 4
-        if high is not None and low is not None:
-            if low < 0:
-                raise ValueError("low must be positive or equal to zero")
-            if high < low:
-                raise ValueError("high must be greater than or equal to low")
-        self.high, self.low = high, low
-        self.pause = pause
-        self.resume = resume
-        self.paused = False
-
-        # This flag prevents concurrent calls to get() by user code.
-        self.get_in_progress = False
-
-        # This flag marks the end of the connection.
-        self.closed = False
-
-    def get_next_frame(self, timeout: float | None = None) -> Frame:
-        # Helper to factor out the logic for getting the next frame from the
-        # queue, while handling timeouts and reaching the end of the stream.
-        if self.closed:
-            try:
-                frame = self.frames.get(block=False)
-            except queue.Empty:
-                raise EOFError("stream of frames ended") from None
-        else:
-            try:
-                # Check for a frame that's already received if timeout <= 0.
-                # SimpleQueue.get() doesn't support negative timeout values.
-                if timeout is not None and timeout <= 0:
-                    frame = self.frames.get(block=False)
-                else:
-                    frame = self.frames.get(block=True, timeout=timeout)
-            except queue.Empty:
-                raise TimeoutError(f"timed out in {timeout:.1f}s") from None
-        if frame is None:
-            raise EOFError("stream of frames ended")
-        return frame
-
-    def reset_queue(self, frames: Iterable[Frame]) -> None:
-        # Helper to put frames back into the queue after they were fetched.
-        # This happens only when the queue is empty. However, by the time
-        # we acquire self.mutex, put() may have added items in the queue.
-        # Therefore, we must handle the case where the queue is not empty.
-        frame: Frame | None
-        with self.mutex:
-            queued = []
-            try:
-                while True:
-                    queued.append(self.frames.get(block=False))
-            except queue.Empty:
-                pass
-            for frame in frames:
-                self.frames.put(frame)
-            # This loop runs only when a race condition occurs.
-            for frame in queued:  # pragma: no cover
-                self.frames.put(frame)
-
-    # This overload structure is required to avoid the error:
-    # "parameter without a default follows parameter with a default"
-
-    @overload
-    def get(self, timeout: float | None, decode: Literal[True]) -> str: ...
-
-    @overload
-    def get(self, timeout: float | None, decode: Literal[False]) -> bytes: ...
-
-    @overload
-    def get(self, timeout: float | None = None, *, decode: Literal[True]) -> str: ...
-
-    @overload
-    def get(self, timeout: float | None = None, *, decode: Literal[False]) -> bytes: ...
-
-    @overload
-    def get(self, timeout: float | None = None, decode: bool | None = None) -> Data: ...
-
-    def get(self, timeout: float | None = None, decode: bool | None = None) -> Data:
-        """
-        Read the next message.
-
-        :meth:`get` returns a single :class:`str` or :class:`bytes`.
-
-        If the message is fragmented, :meth:`get` waits until the last frame is
-        received, then it reassembles the message and returns it. To receive
-        messages frame by frame, use :meth:`get_iter` instead.
-
-        Args:
-            timeout: If a timeout is provided and elapses before a complete
-                message is received, :meth:`get` raises :exc:`TimeoutError`.
-            decode: :obj:`False` disables UTF-8 decoding of text frames and
-                returns :class:`bytes`. :obj:`True` forces UTF-8 decoding of
-                binary frames and returns :class:`str`.
-
-        Raises:
-            EOFError: If the stream of frames has ended.
-            UnicodeDecodeError: If a text frame contains invalid UTF-8.
-            ConcurrencyError: If two coroutines run :meth:`get` or
-                :meth:`get_iter` concurrently.
-            TimeoutError: If a timeout is provided and elapses before a
-                complete message is received.
-
-        """
-        with self.mutex:
-            if self.get_in_progress:
-                raise ConcurrencyError("get() or get_iter() is already running")
-            self.get_in_progress = True
-
-        # Locking with get_in_progress prevents concurrent execution
-        # until get() fetches a complete message or times out.
-
-        try:
-            deadline = Deadline(timeout)
-
-            # First frame
-            frame = self.get_next_frame(deadline.timeout(raise_if_elapsed=False))
-            with self.mutex:
-                self.maybe_resume()
-            assert frame.opcode is OP_TEXT or frame.opcode is OP_BINARY
-            if decode is None:
-                decode = frame.opcode is OP_TEXT
-            frames = [frame]
-
-            # Following frames, for fragmented messages
-            while not frame.fin:
-                try:
-                    frame = self.get_next_frame(
-                        deadline.timeout(raise_if_elapsed=False)
-                    )
-                except TimeoutError:
-                    # Put frames already received back into the queue
-                    # so that future calls to get() can return them.
-                    self.reset_queue(frames)
-                    raise
-                with self.mutex:
-                    self.maybe_resume()
-                assert frame.opcode is OP_CONT
-                frames.append(frame)
-
-        finally:
-            self.get_in_progress = False
-
-        data = b"".join(frame.data for frame in frames)
-        if decode:
-            return data.decode()
-        else:
-            return data
-
-    @overload
-    def get_iter(self, decode: Literal[True]) -> Iterator[str]: ...
-
-    @overload
-    def get_iter(self, decode: Literal[False]) -> Iterator[bytes]: ...
-
-    @overload
-    def get_iter(self, decode: bool | None = None) -> Iterator[Data]: ...
-
-    def get_iter(self, decode: bool | None = None) -> Iterator[Data]:
-        """
-        Stream the next message.
-
-        Iterating the return value of :meth:`get_iter` yields a :class:`str` or
-        :class:`bytes` for each frame in the message.
-
-        The iterator must be fully consumed before calling :meth:`get_iter` or
-        :meth:`get` again. Else, :exc:`ConcurrencyError` is raised.
-
-        This method only makes sense for fragmented messages. If messages aren't
-        fragmented, use :meth:`get` instead.
-
-        Args:
-            decode: :obj:`False` disables UTF-8 decoding of text frames and
-                returns :class:`bytes`. :obj:`True` forces UTF-8 decoding of
-                binary frames and returns :class:`str`.
-
-        Raises:
-            EOFError: If the stream of frames has ended.
-            UnicodeDecodeError: If a text frame contains invalid UTF-8.
-            ConcurrencyError: If two coroutines run :meth:`get` or
-                :meth:`get_iter` concurrently.
-
-        """
-        with self.mutex:
-            if self.get_in_progress:
-                raise ConcurrencyError("get() or get_iter() is already running")
-            self.get_in_progress = True
-
-        # Locking with get_in_progress prevents concurrent execution
-        # until get_iter() fetches a complete message or times out.
-
-        # If get_iter() raises an exception e.g. in decoder.decode(),
-        # get_in_progress remains set and the connection becomes unusable.
-
-        # First frame
-        frame = self.get_next_frame()
-        with self.mutex:
-            self.maybe_resume()
-        assert frame.opcode is OP_TEXT or frame.opcode is OP_BINARY
-        if decode is None:
-            decode = frame.opcode is OP_TEXT
-        if decode:
-            decoder = UTF8Decoder()
-            yield decoder.decode(frame.data, frame.fin)
-        else:
-            yield frame.data
-
-        # Following frames, for fragmented messages
-        while not frame.fin:
-            frame = self.get_next_frame()
-            with self.mutex:
-                self.maybe_resume()
-            assert frame.opcode is OP_CONT
-            if decode:
-                yield decoder.decode(frame.data, frame.fin)
-            else:
-                yield frame.data
-
-        self.get_in_progress = False
-
-    def put(self, frame: Frame) -> None:
-        """
-        Add ``frame`` to the next message.
-
-        Raises:
-            EOFError: If the stream of frames has ended.
-
-        """
-        with self.mutex:
-            if self.closed:
-                raise EOFError("stream of frames ended")
-
-            self.frames.put(frame)
-            self.maybe_pause()
-
-    # put() and get/get_iter() call maybe_pause() and maybe_resume() while
-    # holding self.mutex. This guarantees that the calls interleave properly.
-    # Specifically, it prevents a race condition where maybe_resume() would
-    # run before maybe_pause(), leaving the connection incorrectly paused.
-
-    # A race condition is possible when get/get_iter() call self.frames.get()
-    # without holding self.mutex. However, it's harmless — and even beneficial!
-    # It can only result in popping an item from the queue before maybe_resume()
-    # runs and skipping a pause() - resume() cycle that would otherwise occur.
-
-    def maybe_pause(self) -> None:
-        """Pause the writer if queue is above the high water mark."""
-        # Skip if flow control is disabled
-        if self.high is None:
-            return
-
-        assert self.mutex.locked()
-
-        # Check for "> high" to support high = 0
-        if self.frames.qsize() > self.high and not self.paused:
-            self.paused = True
-            self.pause()
-
-    def maybe_resume(self) -> None:
-        """Resume the writer if queue is below the low water mark."""
-        # Skip if flow control is disabled
-        if self.low is None:
-            return
-
-        assert self.mutex.locked()
-
-        # Check for "<= low" to support low = 0
-        if self.frames.qsize() <= self.low and self.paused:
-            self.paused = False
-            self.resume()
-
-    def close(self) -> None:
-        """
-        End the stream of frames.
-
-        Calling :meth:`close` concurrently with :meth:`get`, :meth:`get_iter`,
-        or :meth:`put` is safe. They will raise :exc:`EOFError`.
-
-        """
-        with self.mutex:
-            if self.closed:
-                return
-
-            self.closed = True
-
-            if self.get_in_progress:
-                # Unblock get() or get_iter().
-                self.frames.put(None)
-
-            if self.paused:
-                # Unblock recv_events().
-                self.paused = False
-                self.resume()

package/.claude/envoy/.venv/lib/python3.9/site-packages/websockets/sync/router.py

@@ -1,192 +0,0 @@
-from __future__ import annotations
-
-import http
-import ssl as ssl_module
-import urllib.parse
-from typing import Any, Callable, Literal
-
-from werkzeug.exceptions import NotFound
-from werkzeug.routing import Map, RequestRedirect
-
-from ..http11 import Request, Response
-from .server import Server, ServerConnection, serve
-
-
-__all__ = ["route", "unix_route", "Router"]
-
-
-class Router:
-    """WebSocket router supporting :func:`route`."""
-
-    def __init__(
-        self,
-        url_map: Map,
-        server_name: str | None = None,
-        url_scheme: str = "ws",
-    ) -> None:
-        self.url_map = url_map
-        self.server_name = server_name
-        self.url_scheme = url_scheme
-        for rule in self.url_map.iter_rules():
-            rule.websocket = True
-
-    def get_server_name(self, connection: ServerConnection, request: Request) -> str:
-        if self.server_name is None:
-            return request.headers["Host"]
-        else:
-            return self.server_name
-
-    def redirect(self, connection: ServerConnection, url: str) -> Response:
-        response = connection.respond(http.HTTPStatus.FOUND, f"Found at {url}")
-        response.headers["Location"] = url
-        return response
-
-    def not_found(self, connection: ServerConnection) -> Response:
-        return connection.respond(http.HTTPStatus.NOT_FOUND, "Not Found")
-
-    def route_request(
-        self, connection: ServerConnection, request: Request
-    ) -> Response | None:
-        """Route incoming request."""
-        url_map_adapter = self.url_map.bind(
-            server_name=self.get_server_name(connection, request),
-            url_scheme=self.url_scheme,
-        )
-        try:
-            parsed = urllib.parse.urlparse(request.path)
-            handler, kwargs = url_map_adapter.match(
-                path_info=parsed.path,
-                query_args=parsed.query,
-            )
-        except RequestRedirect as redirect:
-            return self.redirect(connection, redirect.new_url)
-        except NotFound:
-            return self.not_found(connection)
-        connection.handler, connection.handler_kwargs = handler, kwargs
-        return None
-
-    def handler(self, connection: ServerConnection) -> None:
-        """Handle a connection."""
-        return connection.handler(connection, **connection.handler_kwargs)
-
-
-def route(
-    url_map: Map,
-    *args: Any,
-    server_name: str | None = None,
-    ssl: ssl_module.SSLContext | Literal[True] | None = None,
-    create_router: type[Router] | None = None,
-    **kwargs: Any,
-) -> Server:
-    """
-    Create a WebSocket server dispatching connections to different handlers.
-
-    This feature requires the third-party library `werkzeug`_:
-
-    .. code-block:: console
-
-        $ pip install werkzeug
-
-    .. _werkzeug: https://werkzeug.palletsprojects.com/
-
-    :func:`route` accepts the same arguments as
-    :func:`~websockets.sync.server.serve`, except as described below.
-
-    The first argument is a :class:`werkzeug.routing.Map` that maps URL patterns
-    to connection handlers. In addition to the connection, handlers receive
-    parameters captured in the URL as keyword arguments.
-
-    Here's an example::
-
-
-        from websockets.sync.router import route
-        from werkzeug.routing import Map, Rule
-
-        def channel_handler(websocket, channel_id):
-            ...
-
-        url_map = Map([
-            Rule("/channel/<uuid:channel_id>", endpoint=channel_handler),
-            ...
-        ])
-
-        with route(url_map, ...) as server:
-            server.serve_forever()
-
-    Refer to the documentation of :mod:`werkzeug.routing` for details.
-
-    If you define redirects with ``Rule(..., redirect_to=...)`` in the URL map,
-    when the server runs behind a reverse proxy that modifies the ``Host``
-    header or terminates TLS, you need additional configuration:
-
-    * Set ``server_name`` to the name of the server as seen by clients. When not
-      provided, websockets uses the value of the ``Host`` header.
-
-    * Set ``ssl=True`` to generate ``wss://`` URIs without actually enabling
-      TLS. Under the hood, this bind the URL map with a ``url_scheme`` of
-      ``wss://`` instead of ``ws://``.
-
-    There is no need to specify ``websocket=True`` in each rule. It is added
-    automatically.
-
-    Args:
-        url_map: Mapping of URL patterns to connection handlers.
-        server_name: Name of the server as seen by clients. If :obj:`None`,
-            websockets uses the value of the ``Host`` header.
-        ssl: Configuration for enabling TLS on the connection. Set it to
-            :obj:`True` if a reverse proxy terminates TLS connections.
-        create_router: Factory for the :class:`Router` dispatching requests to
-            handlers. Set it to a wrapper or a subclass to customize routing.
-
-    """
-    url_scheme = "ws" if ssl is None else "wss"
-    if ssl is not True and ssl is not None:
-        kwargs["ssl"] = ssl
-
-    if create_router is None:
-        create_router = Router
-
-    router = create_router(url_map, server_name, url_scheme)
-
-    _process_request: (
-        Callable[
-            [ServerConnection, Request],
-            Response | None,
-        ]
-        | None
-    ) = kwargs.pop("process_request", None)
-    if _process_request is None:
-        process_request: Callable[
-            [ServerConnection, Request],
-            Response | None,
-        ] = router.route_request
-    else:
-
-        def process_request(
-            connection: ServerConnection, request: Request
-        ) -> Response | None:
-            response = _process_request(connection, request)
-            if response is not None:
-                return response
-            return router.route_request(connection, request)
-
-    return serve(router.handler, *args, process_request=process_request, **kwargs)
-
-
-def unix_route(
-    url_map: Map,
-    path: str | None = None,
-    **kwargs: Any,
-) -> Server:
-    """
-    Create a WebSocket Unix server dispatching connections to different handlers.
-
-    :func:`unix_route` combines the behaviors of :func:`route` and
-    :func:`~websockets.sync.server.unix_serve`.
-
-    Args:
-        url_map: Mapping of URL patterns to connection handlers.
-        path: File system path to the Unix socket.
-
-    """
-    return route(url_map, unix=True, path=path, **kwargs)