circuitscript 0.0.22 → 0.0.25

package/examples/example_garden_pump.cst

@@ -1,567 +0,0 @@
-import lib
-
-def decoupling_cap(value):
-    wire down 20
-    add cap(value)
-    wire down 20
-    to gnd
-
-def conn1x4():
-    return create component:
-        pins: 4
-        type: "conn"
-        arrange:
-            left: 1,2,3,4
-        params:
-            footprint: "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical"
-
-def conn1x11():
-    return create component:
-        pins: 11
-        type: "conn"
-        arrange:
-            left: 1,2,3,4,5,6,7,8,9,10,11
-        params:
-            footprint: "Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical"
-
-def conn1x2():
-    return create component:
-        pins: 2
-        type: "conn"
-        arrange:
-            left: 1,2
-        params:
-            footprint: "Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical"
-
-def conn1x5():
-    return create component:
-        pins: 5
-        width: 40
-        type: "conn"
-        arrange:
-            left: 1,2,3,4,5
-        params:
-            footprint: "Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical"
-
-def power_conn():
-    conn1 = conn1x4()
-    at conn1:
-        1: 
-            wire left 20 up 20
-            to v12v
-        2:
-            wire left 20
-            branch:
-                wire down 20 right 20
-                to conn1 pin 3
-            wire left 20 down 20
-            to gnd
-        4:
-            wire down 40 left 20
-            to v3v3
-            ..angle = -90
-
-    return conn1
-
-def s1a_diode():
-    width = 20
-    height = 20
-
-    # Diode is drawn horizontally
-    #  -|>|-
-    return create component:
-        pins: 2
-        type: "diode"
-        display: create graphic:
-            path: ("M", width/2, -height/2, "L", width/2, height/2,
-                   "M", -width/2, -height/2, "L", -width/2, height/2,
-                   "L", width/2, 0, "L", -width/2, -height/2)
-            pin: 1, -width/2-20, 0, -width/2, 0     # anode
-            pin: 2, width/2 + 20, 0, width/2, 0     # cathode
-            label: "refdes", width/2 + 5, 5, "?", fontSize=10, anchor="left", vanchor="top"
-        params:
-            footprint: "GardenRelay:S1A"
-
-
-def tmp_label(name):
-    wire left 100
-    add label(name)
-
-def tmp_label_right(name):
-    wire right 20
-    add label(name)
-    wire right 40
-
-def tps54227_block(inductor_component, upper_fb_resistor, lower_fb_resistor, 
-    enable_label, output_label, inductor_footprint, place=true):
-
-    # the 3v3 supply
-    tps54227 = create component:
-        pins:
-            1: input, "EN"
-            2: input, "VFB"
-            3: input, "VREGS"
-            4: input, "SS"
-            5: "GND"
-            6: power, "SW"
-            7: power, "SW2"
-            8: any, "VBST"
-            9: power, "VIN"
-            10: power, "VIN2"
-            11: any, "PwPd"
-        type: "ic"
-        arrange:
-            left: 9, 10, 1, 3, 4
-            right: 8, 6, 7, 2, 5, 11
-        params:
-            footprint: "GardenRelay:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias"
-
-    frame:
-        ..title = "12V to " + output_label + " DCDC converter"
-
-        at tps54227:
-            1:
-                wire left 20
-                add res(10k) pin 2
-                wire left 40
-                add label(enable_label)
-                wire left 20
-                to v12v left
-
-            9:
-                wire left 20
-                branch:
-                    wire down 20 right 20
-                    to tps54227 pin 10
-                wire left 20 up 100 left 60
-                branch:
-                    decoupling_cap(100n, false)
-                wire left 40
-                branch:
-                    decoupling_cap(10u)
-                wire left 40
-                branch:
-                    decoupling_cap(10u)
-
-                wire up 20
-                to v12v
-
-            3: 
-                wire left 100 down 20
-                decoupling_cap(1u)
-
-            4:
-                wire left 40
-                decoupling_cap(3300p)
-            
-            5: 
-                wire right 20 down 20
-                branch:
-                    wire left 20
-                    to tps54227 pin 11
-                wire down 20
-                to gnd
-
-            6:
-                wire right 60
-                branch:
-                    wire down 20
-                    wire left 60
-                    to tps54227 pin 7
-                wire right 40
-                add inductor_component
-                wire right 20
-                branch:
-                    wire down 20
-                    add res(upper_fb_resistor) down
-                    wire down 20
-                    branch:
-                        wire left 40
-                        wire auto_
-                        to tps54227 pin 2
-                    wire down 20
-                    point fb_point
-                    wire down 20
-                    add res(lower_fb_resistor) down
-                    to gnd
-                wire right 60
-                branch:
-                    wire down 20
-                    add cap(10p)
-                    ..place = false
-
-                    wire auto
-                    to fb_point
-                wire right 60
-                branch:
-                    decoupling_cap(22u)
-                wire right 60
-                branch:
-                    decoupling_cap(22u)
-                wire right 40 up 20
-                to supply(output_label)
-
-            8:
-                wire right 20
-                add cap(100n)
-                ..angle = -90
-                wire right 20 down 20
-                to tps54227 pin 6
-
-
-    
-def main():
-    barrel_jack = create component:
-        pins:
-            1: power, "IN"
-            2: power, "GND"
-        type: "conn"
-        arrange:
-            right: 1,2
-        params:
-            footprint: "Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles"
-
-    frame:
-        ..title = "Power connectors"
-        ..direction = "row"
-
-        at barrel_jack:
-            1:
-                wire right 20
-                branch:
-                    wire up 20
-                    add v12v
-
-                wire right 40
-                branch:
-                    decoupling_cap(10u)
-
-                wire right 40
-                branch:
-                    decoupling_cap(10u)
-
-                wire right 40
-                branch:
-                    decoupling_cap(10u)
-
-            2:
-                wire right 20 down 20
-                to gnd
-
-        # create power connectors
-        J102 = power_conn()
-        J108 = power_conn()
-
-        J104 = conn1x4()
-
-        at J104:
-            1:
-                wire left 20 up 20
-                to supply("5V#")
-            2:
-                wire left 20
-                branch:
-                    wire down 20 right 20
-                    to J104 pin 3
-                wire left 20
-                to v5v left
-            4:
-                wire left 20 down 20    
-                to gnd
-
-    ind_3u3 = ind(3.3u)
-    ind_3u3.footprint = "GardenRelay:NR6020T3R3N"
-
-    ind_4u7 = ind(4.7u)
-    ind_4u7.footprint = "GardenRelay:NRS8030T4R7MJGJ"
-
-    block1 = tps54227_block(ind_3u3, 73.2k, 22.1k, 
-        "EN_3V3", "3V3", "GardenRelay:NR6020T3R3N")
-    
-    block2 = tps54227_block(ind_4u7, 124k, 22.1k, 
-        "EN_5V", "5V#", "GardenRelay:NRS8030T4R7MJGJ")
-
-    frame:
-        ..title = "ESP32 board connector"
-        ..direction = "column"
-
-        frame:
-            ..direction = "row"
-            ..border = 0
-
-            at conn1x2():
-                1:
-                    wire left 40 up 40
-                    add v3v3
-                2:
-                    wire left 40
-                    add label("EN")
-
-            J105 = conn1x11()
-
-            at J105:
-                1: tmp_label("ADC1")
-                2: tmp_label("ADC2")
-                3: tmp_label("GPIO1")
-                4: tmp_label("GPIO2")
-                5: tmp_label("ADC3")
-                6: tmp_label("GPIO3")
-                7: tmp_label("ADC4")
-                8: tmp_label("GPIO4")
-                9: tmp_label("ADC8")
-                10:
-                    wire left 100 
-                    to gnd left
-                11: tmp_label("ADC7") 
-
-            J106 = conn1x2()
-
-            at J106:
-                1: 
-                    wire left 100 
-                    to gnd left
-                2: tmp_label("GPIO13")
-
-            J107 = conn1x11()
-
-            at J107:
-                1: tmp_label("GPIO5")
-                2: 
-                    wire left 100 
-                    to gnd left
-                3: tmp_label("GPIO6")
-                4: tmp_label("GPIO7")
-                5: tmp_label("GPIO8")
-                6: tmp_label("GPIO9")
-                7: tmp_label("GPIO10")
-                8: tmp_label("ADC5")
-                9: tmp_label("ADC6")
-                10: tmp_label("GPIO11")
-                11: tmp_label("GPIO12")
-
-        frame:
-            ..border = 0
-            
-            J109 = conn1x4()
-            at J109:
-                1: tmp_label("GPIO11")
-                2: tmp_label("GPIO12")
-                3: tmp_label("GPIO13")
-                4: 
-                    wire left 40 
-                    to v5v left
-
-            J110 = conn1x4()
-            at J110:
-                1: tmp_label("GPIO10")
-                2: tmp_label("GPIO9")
-                3:
-                    wire left 40 
-                    to v3v3 left
-                4: 
-                    wire left 20 down 20
-                    to gnd
-
-def mosfet():
-    return create component:
-        pins: 3
-        type: "transistor"
-        arrange:
-            left: 1
-            right: 3,2
-        params:
-            footprint: "Package_TO_SOT_SMD:SOT-23"
-
-def decoupling_cap(value, place=true):
-    branch:
-        wire down 20
-        add cap(value)
-        ..place = place
-        wire down 20
-        to gnd
-
-def pump_block(enable_name, sense_out):
-    relay = create component:
-        pins: 5
-        type: "relay"
-        arrange:
-            left: 2, [1], 5
-            right: 4,3,1
-        params:
-            footprint: "GardenRelay:AZ943-1CH-12DEF"
-
-    diff_amp = create component:
-        pins: 
-            1: "OUT"
-            2: "V+"
-            3: "+"
-            4: "-"
-            5: "V-"
-        type: "ic"
-        arrange:
-            left: 3,[1], 4
-            right: 2,1,5
-        params:
-            footprint: "Package_TO_SOT_SMD:SOT-23-5"
-
-    frame:
-        ..title = "Pump control block (" + enable_name + ")"
-        ..direction = "row"
-        
-        frame:
-            ..title = "Connector"
-            ..border = 0
-            ..padding = 0
-
-            conn = conn1x5()
-            at conn:
-                1:
-                    wire left 20 up 20
-                    to v12v
-                2: tmp_label("LOAD_SUPPLY")
-                3: 
-                    wire left 40
-                    to v5v left
-                4: tmp_label("CONN+")
-                5: tmp_label("CONN-")
-
-        frame:
-            ..title = "Relay control for " + enable_name
-            ..border = 0
-            ..padding = 0
-
-            at label(enable_name)
-            wire right 40 
-            branch:
-                wire down 20
-                add led("RED") down
-                wire down 20
-                add res(130) down
-                wire down 20 to gnd
-            wire right 40
-            branch:
-                wire down 20
-                add res(1k) down
-                wire down 20
-                to gnd
-
-            wire right 20
-            add Q1 = mosfet()
-            at Q1 pin 2 
-            wire right 20 down 20
-            to gnd
-
-            at v12v
-            wire down 20
-            branch:
-                wire right 80
-                add relay pin 2
-            wire down 20
-            add s1a_diode() pin 2 down
-            wire down 20
-            branch:
-                wire right 40
-                wire auto
-                to relay pin 5
-            wire left 40 up 80 left 60
-            to Q1 pin 3
-
-            at relay:
-                4:
-                    wire right 20
-                    branch:
-                        wire up 100 right 140
-                        add label("SENSE+")
-                        wire right 60
-                    wire right 20
-                    add res(0.05)
-                    wire right 20
-                    branch:
-                        wire up 80 right 20
-                        add label("SENSE-")
-                        wire right 60
-                    wire right 20
-                    add label("LOAD_SUPPLY")
-                    wire right 80
-                1:
-                    wire right 20
-                    branch:
-                        wire right 40
-                        add label("CONN+")
-                        wire right 40
-                    wire down 20
-                    add s1a_diode() pin 2 down
-                    wire down 20
-                    branch:
-                        wire right 40
-                        add label("CONN-")
-                        wire right 40
-                    wire down 20
-                    to gnd  
-
-        frame:
-            ..title = "Current sense for "+ sense_out
-            ..border = 0
-            ..padding = 0
-        
-            at label("SENSE+")
-            wire right 40 
-            add res(1k)
-            wire right 20
-            point tmp1
-
-            branch:
-                wire right 40
-                to diff_amp pin 3
-
-            at diff_amp:
-                2:
-                    wire right 20 up 20
-                    to v3v3
-                5:
-                    wire right 20 down 20
-                    to gnd
-                1: 
-                    wire right 40
-                    branch:
-                        wire up 100 left 40
-                        add res(20k) pin 2
-                        wire auto_
-                        to tmp1
-
-                    wire right 40
-                    decoupling_cap(100n)
-                    wire right 40
-                    add label(sense_out)
-                    wire right 40
-
-            at label("SENSE-")
-            wire right 40
-            add res(1k)
-            wire right 20
-            
-            branch:
-                wire right 40
-                to diff_amp pin 4
-
-            wire down 20
-            add res(20k) down
-            wire down 20 left 20
-            to supply("Vbias") left
-
-# define global nets
-v12v = supply("12V")
-v3v3 = supply("3V3")
-v5v = supply("5V")
-gnd = dgnd()
-
-main()
-
-/pump1 pump_block("GPIO1", "ADC1")
-/pump2 pump_block("GPIO2", "ADC2") 
-/pump3 pump_block("GPIO3", "ADC3")
-/pump4 pump_block("GPIO4", "ADC4")
-/pump5 pump_block("GPIO5", "ADC5")
-/pump6 pump_block("GPIO6", "ADC6")
-/pump7 pump_block("GPIO7", "ADC7")
-/pump8 pump_block("GPIO8", "ADC8")