circuit-to-canvas 0.0.50 → 0.0.52

package/tests/elements/pcb-no-soldermask.test.ts

@@ -0,0 +1,1281 @@
+import { expect, test } from "bun:test"
+import { createCanvas } from "@napi-rs/canvas"
+import type { AnyCircuitElement } from "circuit-json"
+import { CircuitToCanvasDrawer } from "../../lib/drawer"
+
+/**
+ * Comprehensive test for soldermask margin functionality:
+ * - Row 1: Fully covered elements (is_covered_with_solder_mask = true)
+ * - Row 2: Positive margin (soldermask_margin = 0.5)
+ * - Row 3: Negative margin (soldermask_margin = -0.3)
+ * - Row 4: Default behavior (no margin specified)
+ *
+ * Columns (left to right):
+ * SMT Pads:
+ *   1. Rotated Rect
+ *   2. Polygon
+ *   3. Pill
+ *   4. Rotated Pill
+ *   5. Circle
+ *   6. Rect
+ * Plated Holes:
+ *   7. Circle PTH
+ *   8. Oval PTH
+ *   9. Pill PTH
+ *   10. Circ+Rect PTH (circular_hole_with_rect_pad)
+ *   11. Pill+Rect PTH (pill_hole_with_rect_pad)
+ *   12. RotPill+Rect PTH (rotated_pill_hole_with_rect_pad)
+ *   13. Poly Pad PTH (hole_with_polygon_pad)
+ * Non-plated Holes:
+ *   14. Circle Hole
+ *   15. Oval Hole
+ *   16. Pill Hole
+ */
+test("comprehensive soldermask margin test", async () => {
+  const canvas = createCanvas(1800, 1000)
+  const ctx = canvas.getContext("2d")
+  const drawer = new CircuitToCanvasDrawer(ctx)
+
+  ctx.fillStyle = "#1a1a1a"
+  ctx.fillRect(0, 0, 2000, 1000)
+
+  // Layout configuration - centered around x: 0
+  const colSpacing = 10 // spacing between columns
+  const numCols = 16
+  const totalWidth = (numCols - 1) * colSpacing
+  const startX = -totalWidth / 2 // center the columns
+
+  // Column X positions (centered around 0)
+  const col = {
+    // SMT Pads (columns 1-6)
+    rotatedRect: startX + 0 * colSpacing,
+    polygon: startX + 1 * colSpacing,
+    pill: startX + 2 * colSpacing,
+    rotatedPill: startX + 3 * colSpacing,
+    circlePad: startX + 4 * colSpacing,
+    rectPad: startX + 5 * colSpacing,
+    // Plated Holes (columns 7-13)
+    circlePlatedHole: startX + 6 * colSpacing,
+    ovalPlatedHole: startX + 7 * colSpacing,
+    pillPlatedHole: startX + 8 * colSpacing,
+    circRectPTH: startX + 9 * colSpacing,
+    pillRectPTH: startX + 10 * colSpacing,
+    rotPillRectPTH: startX + 11 * colSpacing,
+    polyPadPTH: startX + 12 * colSpacing,
+    // Non-plated Holes (columns 14-16)
+    circleHole: startX + 13 * colSpacing,
+    ovalHole: startX + 14 * colSpacing,
+    pillHole: startX + 15 * colSpacing,
+  }
+
+  // Row Y positions (centered around 0)
+  const row = {
+    fullyCovered: 12,
+    positiveMargin: 4,
+    negativeMargin: -4,
+    default: -12,
+  }
+
+  // Helper for polygon pad outline (hexagon centered at origin)
+  const polyPadOutline = [
+    { x: -1, y: -1.5 },
+    { x: 1, y: -1.5 },
+    { x: 1.5, y: 0 },
+    { x: 1, y: 1.5 },
+    { x: -1, y: 1.5 },
+    { x: -1.5, y: 0 },
+  ]
+
+  const circuit: AnyCircuitElement[] = [
+    {
+      type: "pcb_board",
+      pcb_board_id: "board_test",
+      center: { x: 0, y: 0 },
+      width: 180,
+      height: 45,
+      thickness: 1.6,
+      num_layers: 2,
+      material: "fr4",
+    },
+    // Dummy component for silkscreen elements
+    {
+      type: "pcb_component",
+      pcb_component_id: "dummy_component",
+      center: { x: 0, y: 0 },
+      width: 180,
+      height: 45,
+      rotation: 0,
+      layer: "top",
+      source_component_id: "dummy",
+      obstructs_within_bounds: false,
+    },
+
+    // =====================================================
+    // Row 1: Fully covered elements (is_covered_with_solder_mask = true)
+    // =====================================================
+
+    // Column 1: Rotated Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_rotated_rect",
+      shape: "rotated_rect",
+      x: col.rotatedRect,
+      y: row.fullyCovered,
+      width: 2,
+      height: 1,
+      ccw_rotation: 30,
+      layer: "top",
+      is_covered_with_solder_mask: true,
+    },
+    // Column 2: Polygon SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_polygon",
+      shape: "polygon",
+      layer: "top",
+      points: [
+        { x: col.polygon - 1, y: row.fullyCovered - 1 },
+        { x: col.polygon + 1, y: row.fullyCovered - 1 },
+        { x: col.polygon + 2, y: row.fullyCovered + 1 },
+        { x: col.polygon + 1, y: row.fullyCovered + 3 },
+        { x: col.polygon - 1, y: row.fullyCovered + 3 },
+        { x: col.polygon - 2, y: row.fullyCovered + 1 },
+      ],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 3: Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_pill",
+      shape: "pill",
+      x: col.pill,
+      y: row.fullyCovered,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      layer: "top",
+      is_covered_with_solder_mask: true,
+    },
+    // Column 4: Rotated Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_rotated_pill",
+      shape: "rotated_pill",
+      x: col.rotatedPill,
+      y: row.fullyCovered,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      ccw_rotation: 30,
+      layer: "top",
+      is_covered_with_solder_mask: true,
+    },
+    // Column 5: Circle SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_circle",
+      shape: "circle",
+      x: col.circlePad,
+      y: row.fullyCovered,
+      radius: 1,
+      layer: "top",
+      is_covered_with_solder_mask: true,
+    },
+    // Column 6: Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_fully_covered_rect",
+      shape: "rect",
+      x: col.rectPad,
+      y: row.fullyCovered,
+      width: 2,
+      height: 2,
+      layer: "top",
+      is_covered_with_solder_mask: true,
+    },
+    // Column 7: Circle Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_circle",
+      shape: "circle",
+      x: col.circlePlatedHole,
+      y: row.fullyCovered,
+      hole_diameter: 1,
+      outer_diameter: 2,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 8: Oval Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_oval",
+      shape: "oval",
+      x: col.ovalPlatedHole,
+      y: row.fullyCovered,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 9: Pill Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_pill",
+      shape: "pill",
+      x: col.pillPlatedHole,
+      y: row.fullyCovered,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 10: Circular Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_circ_rect",
+      shape: "circular_hole_with_rect_pad",
+      x: col.circRectPTH,
+      y: row.fullyCovered,
+      hole_shape: "circle",
+      hole_diameter: 1,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 11: Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_pill_rect",
+      shape: "pill_hole_with_rect_pad",
+      x: col.pillRectPTH,
+      y: row.fullyCovered,
+      hole_shape: "pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 12: Rotated Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_rot_pill_rect",
+      shape: "rotated_pill_hole_with_rect_pad",
+      x: col.rotPillRectPTH,
+      y: row.fullyCovered,
+      hole_shape: "rotated_pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      hole_ccw_rotation: 45,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      rect_ccw_rotation: 30,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 13: Hole with Polygon Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_fully_covered_poly_pad",
+      shape: "hole_with_polygon_pad",
+      x: col.polyPadPTH,
+      y: row.fullyCovered,
+      hole_shape: "circle",
+      hole_diameter: 0.8,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      pad_outline: polyPadOutline,
+      layers: ["top", "bottom"],
+      is_covered_with_solder_mask: true,
+    },
+    // Column 14: Circle Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_fully_covered_circle",
+      hole_shape: "circle",
+      x: col.circleHole,
+      y: row.fullyCovered,
+      hole_diameter: 1,
+      is_covered_with_solder_mask: true,
+    },
+    // Column 15: Oval Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_fully_covered_oval",
+      hole_shape: "oval",
+      x: col.ovalHole,
+      y: row.fullyCovered,
+      hole_width: 2,
+      hole_height: 1,
+      is_covered_with_solder_mask: true,
+    },
+    // Column 16: Pill Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_fully_covered_pill",
+      hole_shape: "pill",
+      x: col.pillHole,
+      y: row.fullyCovered,
+      hole_width: 2,
+      hole_height: 1,
+      is_covered_with_solder_mask: true,
+    },
+
+    // =====================================================
+    // Row 2: Positive margin (soldermask_margin = 0.5)
+    // =====================================================
+
+    // Column 1: Rotated Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_rotated_rect",
+      shape: "rotated_rect",
+      x: col.rotatedRect,
+      y: row.positiveMargin,
+      width: 2,
+      height: 1,
+      ccw_rotation: 30,
+      layer: "top",
+      soldermask_margin: 0.5,
+    },
+    // Column 2: Polygon SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_polygon",
+      shape: "polygon",
+      layer: "top",
+      points: [
+        { x: col.polygon - 1, y: row.positiveMargin - 1 },
+        { x: col.polygon + 1, y: row.positiveMargin - 1 },
+        { x: col.polygon + 2, y: row.positiveMargin + 1 },
+        { x: col.polygon + 1, y: row.positiveMargin + 3 },
+        { x: col.polygon - 1, y: row.positiveMargin + 3 },
+        { x: col.polygon - 2, y: row.positiveMargin + 1 },
+      ],
+      soldermask_margin: 0.5,
+    },
+    // Column 3: Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_pill",
+      shape: "pill",
+      x: col.pill,
+      y: row.positiveMargin,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      layer: "top",
+      soldermask_margin: 0.5,
+    },
+    // Column 4: Rotated Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_rotated_pill",
+      shape: "rotated_pill",
+      x: col.rotatedPill,
+      y: row.positiveMargin,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      ccw_rotation: 30,
+      layer: "top",
+      soldermask_margin: 0.5,
+    },
+    // Column 5: Circle SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_circle",
+      shape: "circle",
+      x: col.circlePad,
+      y: row.positiveMargin,
+      radius: 1,
+      layer: "top",
+      soldermask_margin: 0.5,
+    },
+    // Column 6: Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_positive_margin_rect",
+      shape: "rect",
+      x: col.rectPad,
+      y: row.positiveMargin,
+      width: 2,
+      height: 2,
+      layer: "top",
+      soldermask_margin: 0.5,
+    },
+    // Column 7: Circle Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_circle",
+      shape: "circle",
+      x: col.circlePlatedHole,
+      y: row.positiveMargin,
+      hole_diameter: 1,
+      outer_diameter: 2,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 8: Oval Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_oval",
+      shape: "oval",
+      x: col.ovalPlatedHole,
+      y: row.positiveMargin,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 9: Pill Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_pill",
+      shape: "pill",
+      x: col.pillPlatedHole,
+      y: row.positiveMargin,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 10: Circular Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_circ_rect",
+      shape: "circular_hole_with_rect_pad",
+      x: col.circRectPTH,
+      y: row.positiveMargin,
+      hole_shape: "circle",
+      hole_diameter: 1,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 11: Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_pill_rect",
+      shape: "pill_hole_with_rect_pad",
+      x: col.pillRectPTH,
+      y: row.positiveMargin,
+      hole_shape: "pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 12: Rotated Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_rot_pill_rect",
+      shape: "rotated_pill_hole_with_rect_pad",
+      x: col.rotPillRectPTH,
+      y: row.positiveMargin,
+      hole_shape: "rotated_pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      hole_ccw_rotation: 45,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      rect_ccw_rotation: 30,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 13: Hole with Polygon Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_positive_margin_poly_pad",
+      shape: "hole_with_polygon_pad",
+      x: col.polyPadPTH,
+      y: row.positiveMargin,
+      hole_shape: "circle",
+      hole_diameter: 0.8,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      pad_outline: polyPadOutline,
+      layers: ["top", "bottom"],
+      soldermask_margin: 0.5,
+    },
+    // Column 14: Circle Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_positive_margin_circle",
+      hole_shape: "circle",
+      x: col.circleHole,
+      y: row.positiveMargin,
+      hole_diameter: 1,
+      soldermask_margin: 0.5,
+    },
+    // Column 15: Oval Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_positive_margin_oval",
+      hole_shape: "oval",
+      x: col.ovalHole,
+      y: row.positiveMargin,
+      hole_width: 2,
+      hole_height: 1,
+      soldermask_margin: 0.5,
+    },
+    // Column 16: Pill Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_positive_margin_pill",
+      hole_shape: "pill",
+      x: col.pillHole,
+      y: row.positiveMargin,
+      hole_width: 2,
+      hole_height: 1,
+      soldermask_margin: 0.5,
+    },
+
+    // =====================================================
+    // Row 3: Negative margin (soldermask_margin = -0.3)
+    // =====================================================
+
+    // Column 1: Rotated Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_rotated_rect",
+      shape: "rotated_rect",
+      x: col.rotatedRect,
+      y: row.negativeMargin,
+      width: 2,
+      height: 1,
+      ccw_rotation: 30,
+      layer: "top",
+      soldermask_margin: -0.3,
+    },
+    // Column 2: Polygon SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_polygon",
+      shape: "polygon",
+      layer: "top",
+      points: [
+        { x: col.polygon - 1, y: row.negativeMargin - 1 },
+        { x: col.polygon + 1, y: row.negativeMargin - 1 },
+        { x: col.polygon + 2, y: row.negativeMargin + 1 },
+        { x: col.polygon + 1, y: row.negativeMargin + 3 },
+        { x: col.polygon - 1, y: row.negativeMargin + 3 },
+        { x: col.polygon - 2, y: row.negativeMargin + 1 },
+      ],
+      soldermask_margin: -0.3,
+    },
+    // Column 3: Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_pill",
+      shape: "pill",
+      x: col.pill,
+      y: row.negativeMargin,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      layer: "top",
+      soldermask_margin: -0.3,
+    },
+    // Column 4: Rotated Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_rotated_pill",
+      shape: "rotated_pill",
+      x: col.rotatedPill,
+      y: row.negativeMargin,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      ccw_rotation: 30,
+      layer: "top",
+      soldermask_margin: -0.3,
+    },
+    // Column 5: Circle SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_circle",
+      shape: "circle",
+      x: col.circlePad,
+      y: row.negativeMargin,
+      radius: 1,
+      layer: "top",
+      soldermask_margin: -0.3,
+    },
+    // Column 6: Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_negative_margin_rect",
+      shape: "rect",
+      x: col.rectPad,
+      y: row.negativeMargin,
+      width: 2,
+      height: 2,
+      layer: "top",
+      soldermask_margin: -0.3,
+    },
+    // Column 7: Circle Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_circle",
+      shape: "circle",
+      x: col.circlePlatedHole,
+      y: row.negativeMargin,
+      hole_diameter: 1,
+      outer_diameter: 2,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 8: Oval Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_oval",
+      shape: "oval",
+      x: col.ovalPlatedHole,
+      y: row.negativeMargin,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 9: Pill Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_pill",
+      shape: "pill",
+      x: col.pillPlatedHole,
+      y: row.negativeMargin,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 10: Circular Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_circ_rect",
+      shape: "circular_hole_with_rect_pad",
+      x: col.circRectPTH,
+      y: row.negativeMargin,
+      hole_shape: "circle",
+      hole_diameter: 1,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 11: Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_pill_rect",
+      shape: "pill_hole_with_rect_pad",
+      x: col.pillRectPTH,
+      y: row.negativeMargin,
+      hole_shape: "pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 12: Rotated Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_rot_pill_rect",
+      shape: "rotated_pill_hole_with_rect_pad",
+      x: col.rotPillRectPTH,
+      y: row.negativeMargin,
+      hole_shape: "rotated_pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      hole_ccw_rotation: 45,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      rect_ccw_rotation: 30,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 13: Hole with Polygon Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_negative_margin_poly_pad",
+      shape: "hole_with_polygon_pad",
+      x: col.polyPadPTH,
+      y: row.negativeMargin,
+      hole_shape: "circle",
+      hole_diameter: 0.8,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      pad_outline: polyPadOutline,
+      layers: ["top", "bottom"],
+      soldermask_margin: -0.3,
+    },
+    // Column 14: Circle Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_negative_margin_circle",
+      hole_shape: "circle",
+      x: col.circleHole,
+      y: row.negativeMargin,
+      hole_diameter: 1,
+      soldermask_margin: -0.3,
+    },
+    // Column 15: Oval Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_negative_margin_oval",
+      hole_shape: "oval",
+      x: col.ovalHole,
+      y: row.negativeMargin,
+      hole_width: 2,
+      hole_height: 1,
+      soldermask_margin: -0.3,
+    },
+    // Column 16: Pill Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_negative_margin_pill",
+      hole_shape: "pill",
+      x: col.pillHole,
+      y: row.negativeMargin,
+      hole_width: 2,
+      hole_height: 1,
+      soldermask_margin: -0.3,
+    },
+
+    // =====================================================
+    // Row 4: Default behavior (no margin specified)
+    // =====================================================
+
+    // Column 1: Rotated Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_rotated_rect",
+      shape: "rotated_rect",
+      x: col.rotatedRect,
+      y: row.default,
+      width: 2,
+      height: 1,
+      ccw_rotation: 30,
+      layer: "top",
+    },
+    // Column 2: Polygon SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_polygon",
+      shape: "polygon",
+      layer: "top",
+      points: [
+        { x: col.polygon - 1, y: row.default - 1 },
+        { x: col.polygon + 1, y: row.default - 1 },
+        { x: col.polygon + 2, y: row.default + 1 },
+        { x: col.polygon + 1, y: row.default + 3 },
+        { x: col.polygon - 1, y: row.default + 3 },
+        { x: col.polygon - 2, y: row.default + 1 },
+      ],
+    },
+    // Column 3: Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_pill",
+      shape: "pill",
+      x: col.pill,
+      y: row.default,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      layer: "top",
+    },
+    // Column 4: Rotated Pill SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_rotated_pill",
+      shape: "rotated_pill",
+      x: col.rotatedPill,
+      y: row.default,
+      width: 3,
+      height: 1,
+      radius: 0.5,
+      ccw_rotation: 30,
+      layer: "top",
+    },
+    // Column 5: Circle SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_circle",
+      shape: "circle",
+      x: col.circlePad,
+      y: row.default,
+      radius: 1,
+      layer: "top",
+    },
+    // Column 6: Rect SMT Pad
+    {
+      type: "pcb_smtpad",
+      pcb_smtpad_id: "pad_default_rect",
+      shape: "rect",
+      x: col.rectPad,
+      y: row.default,
+      width: 2,
+      height: 2,
+      layer: "top",
+    },
+    // Column 7: Circle Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_circle",
+      shape: "circle",
+      x: col.circlePlatedHole,
+      y: row.default,
+      hole_diameter: 1,
+      outer_diameter: 2,
+      layers: ["top", "bottom"],
+    },
+    // Column 8: Oval Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_oval",
+      shape: "oval",
+      x: col.ovalPlatedHole,
+      y: row.default,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+    },
+    // Column 9: Pill Plated Hole
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_pill",
+      shape: "pill",
+      x: col.pillPlatedHole,
+      y: row.default,
+      outer_width: 3,
+      outer_height: 1.5,
+      hole_width: 2,
+      hole_height: 0.8,
+      ccw_rotation: 0,
+      layers: ["top", "bottom"],
+    },
+    // Column 10: Circular Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_circ_rect",
+      shape: "circular_hole_with_rect_pad",
+      x: col.circRectPTH,
+      y: row.default,
+      hole_shape: "circle",
+      hole_diameter: 1,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+    },
+    // Column 11: Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_pill_rect",
+      shape: "pill_hole_with_rect_pad",
+      x: col.pillRectPTH,
+      y: row.default,
+      hole_shape: "pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+    },
+    // Column 12: Rotated Pill Hole with Rect Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_rot_pill_rect",
+      shape: "rotated_pill_hole_with_rect_pad",
+      x: col.rotPillRectPTH,
+      y: row.default,
+      hole_shape: "rotated_pill",
+      hole_width: 2,
+      hole_height: 0.8,
+      hole_ccw_rotation: 45,
+      pad_shape: "rect",
+      rect_pad_width: 3,
+      rect_pad_height: 2,
+      rect_ccw_rotation: 30,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      layers: ["top", "bottom"],
+    },
+    // Column 13: Hole with Polygon Pad
+    {
+      type: "pcb_plated_hole",
+      pcb_plated_hole_id: "hole_default_poly_pad",
+      shape: "hole_with_polygon_pad",
+      x: col.polyPadPTH,
+      y: row.default,
+      hole_shape: "circle",
+      hole_diameter: 0.8,
+      hole_offset_x: 0,
+      hole_offset_y: 0,
+      pad_outline: polyPadOutline,
+      layers: ["top", "bottom"],
+    },
+    // Column 14: Circle Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_default_circle",
+      hole_shape: "circle",
+      x: col.circleHole,
+      y: row.default,
+      hole_diameter: 1,
+    },
+    // Column 15: Oval Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_default_oval",
+      hole_shape: "oval",
+      x: col.ovalHole,
+      y: row.default,
+      hole_width: 2,
+      hole_height: 1,
+    },
+    // Column 16: Pill Hole
+    {
+      type: "pcb_hole",
+      pcb_hole_id: "np_hole_default_pill",
+      hole_shape: "pill",
+      x: col.pillHole,
+      y: row.default,
+      hole_width: 2,
+      hole_height: 1,
+    },
+
+    // =====================================================
+    // Row labels (left side)
+    // =====================================================
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_fully_covered",
+      pcb_component_id: "dummy_component",
+      text: "FULLY COVERED",
+      layer: "top",
+      anchor_position: { x: -90, y: row.fullyCovered },
+      anchor_alignment: "center_left",
+      font_size: 1,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_positive_margin",
+      pcb_component_id: "dummy_component",
+      text: "POSITIVE MARGIN",
+      layer: "top",
+      anchor_position: { x: -90, y: row.positiveMargin },
+      anchor_alignment: "center_left",
+      font_size: 1,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_negative_margin",
+      pcb_component_id: "dummy_component",
+      text: "NEGATIVE MARGIN",
+      layer: "top",
+      anchor_position: { x: -90, y: row.negativeMargin },
+      anchor_alignment: "center_left",
+      font_size: 1,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_default",
+      pcb_component_id: "dummy_component",
+      text: "DEFAULT",
+      layer: "top",
+      anchor_position: { x: -90, y: row.default },
+      anchor_alignment: "center_left",
+      font_size: 1,
+      font: "tscircuit2024",
+    },
+
+    // =====================================================
+    // Row separators
+    // =====================================================
+    {
+      type: "pcb_silkscreen_path",
+      pcb_silkscreen_path_id: "separator_1",
+      pcb_component_id: "dummy_component",
+      layer: "top",
+      stroke_width: 0.1,
+      route: [
+        { x: -90, y: 8 },
+        { x: 90, y: 8 },
+      ],
+    },
+    {
+      type: "pcb_silkscreen_path",
+      pcb_silkscreen_path_id: "separator_2",
+      pcb_component_id: "dummy_component",
+      layer: "top",
+      stroke_width: 0.1,
+      route: [
+        { x: -90, y: 0 },
+        { x: 90, y: 0 },
+      ],
+    },
+    {
+      type: "pcb_silkscreen_path",
+      pcb_silkscreen_path_id: "separator_3",
+      pcb_component_id: "dummy_component",
+      layer: "top",
+      stroke_width: 0.1,
+      route: [
+        { x: -90, y: -8 },
+        { x: 90, y: -8 },
+      ],
+    },
+
+    // =====================================================
+    // Column labels (top)
+    // =====================================================
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_rotated_rect",
+      pcb_component_id: "dummy_component",
+      text: "ROT RECT",
+      layer: "top",
+      anchor_position: { x: col.rotatedRect, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_polygon",
+      pcb_component_id: "dummy_component",
+      text: "POLYGON",
+      layer: "top",
+      anchor_position: { x: col.polygon, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_pill",
+      pcb_component_id: "dummy_component",
+      text: "PILL",
+      layer: "top",
+      anchor_position: { x: col.pill, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_rotated_pill",
+      pcb_component_id: "dummy_component",
+      text: "ROT PILL",
+      layer: "top",
+      anchor_position: { x: col.rotatedPill, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_circle_pad",
+      pcb_component_id: "dummy_component",
+      text: "CIRCLE",
+      layer: "top",
+      anchor_position: { x: col.circlePad, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_rect_pad",
+      pcb_component_id: "dummy_component",
+      text: "RECT",
+      layer: "top",
+      anchor_position: { x: col.rectPad, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_circle_plated",
+      pcb_component_id: "dummy_component",
+      text: "CIRC PTH",
+      layer: "top",
+      anchor_position: { x: col.circlePlatedHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_oval_plated",
+      pcb_component_id: "dummy_component",
+      text: "OVAL PTH",
+      layer: "top",
+      anchor_position: { x: col.ovalPlatedHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_pill_plated",
+      pcb_component_id: "dummy_component",
+      text: "PILL PTH",
+      layer: "top",
+      anchor_position: { x: col.pillPlatedHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_circ_rect",
+      pcb_component_id: "dummy_component",
+      text: "C+RECT",
+      layer: "top",
+      anchor_position: { x: col.circRectPTH, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_pill_rect",
+      pcb_component_id: "dummy_component",
+      text: "P+RECT",
+      layer: "top",
+      anchor_position: { x: col.pillRectPTH, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_rot_pill_rect",
+      pcb_component_id: "dummy_component",
+      text: "RP+RECT",
+      layer: "top",
+      anchor_position: { x: col.rotPillRectPTH, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_poly_pad",
+      pcb_component_id: "dummy_component",
+      text: "POLY PAD",
+      layer: "top",
+      anchor_position: { x: col.polyPadPTH, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_circle_hole",
+      pcb_component_id: "dummy_component",
+      text: "CIRC HOLE",
+      layer: "top",
+      anchor_position: { x: col.circleHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_oval_hole",
+      pcb_component_id: "dummy_component",
+      text: "OVAL HOLE",
+      layer: "top",
+      anchor_position: { x: col.ovalHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+    {
+      type: "pcb_silkscreen_text",
+      pcb_silkscreen_text_id: "label_col_pill_hole",
+      pcb_component_id: "dummy_component",
+      text: "PILL HOLE",
+      layer: "top",
+      anchor_position: { x: col.pillHole, y: 18 },
+      anchor_alignment: "center",
+      font_size: 0.8,
+      font: "tscircuit2024",
+    },
+  ]
+
+  drawer.setCameraBounds({ minX: -95, maxX: 90, minY: -22, maxY: 22 })
+  drawer.drawElements(circuit)
+
+  await expect(canvas.toBuffer("image/png")).toMatchPngSnapshot(
+    import.meta.path,
+  )
+})