circuit-json 0.0.539 → 0.0.541

package/dist/index.mjs

@@ -3553,7 +3553,7 @@ var pcb_silkscreen_text = z153.object({
   subcircuit_id: z153.string().optional(),
   font: z153.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z153.string(),
+  pcb_component_id: z153.string().optional().describe("Owning component, omitted for board- or group-level text"),
   text: z153.string(),
   is_knockout: z153.boolean().default(false).optional(),
   knockout_padding: z153.object({
@@ -4688,26 +4688,75 @@ var cad_collision_error = base_circuit_json_error.extend({
 );
 expectTypesMatch(true);
 
-// src/cad/cad_cable.ts
+// src/cad/cad_explosion_collision_error.ts
 import { z as z204 } from "zod";
+var cad_explosion_collision_obstacle = z204.discriminatedUnion("type", [
+  z204.object({
+    type: z204.literal("cad_component"),
+    cad_component_id: z204.string().min(1)
+  }),
+  z204.object({ type: z204.literal("pcb_board"), pcb_board_id: z204.string().min(1) })
+]);
+var cad_explosion_collision_error = base_circuit_json_error.extend({
+  type: z204.literal("cad_explosion_collision_error"),
+  cad_explosion_collision_error_id: getZodPrefixedIdWithDefault(
+    "cad_explosion_collision_error"
+  ),
+  error_type: z204.literal("cad_explosion_collision_error").default("cad_explosion_collision_error"),
+  cad_explosion_stage_id: z204.string().min(1),
+  cad_explosion_move_id: z204.string().min(1),
+  moving_cad_component_id: z204.string().min(1),
+  obstacle: cad_explosion_collision_obstacle,
+  source_component_ids: z204.array(z204.string().min(1)).min(1),
+  swept_intersection_volume_mm3: z204.number().finite().positive().describe(
+    "Volume of the obstacle intersected by the moving solid's continuous translation sweep, excluding space occupied by that solid at the start of this move. Cubic millimetres; not instantaneous penetration volume or contact area."
+  )
+}).describe(
+  "A straight explosion move enters an obstacle. Earlier stages and moves have already been applied; targets of the same move translate together and do not collide with each other. Existing overlap at the start of the move and zero-volume touching are excluded. Geometry uses right-handed Circuit JSON world coordinates (+X right, +Y top, +Z above), in millimetres. This error identifies a collision, not an exact time of first contact. Its absence does not establish clearance when geometry could not be checked."
+);
+expectTypesMatch(true);
+
+// src/cad/cad_explosion_collision_check_warning.ts
+import { z as z205 } from "zod";
+var cad_explosion_collision_check_warning = base_circuit_json_error.extend({
+  type: z205.literal("cad_explosion_collision_check_warning"),
+  cad_explosion_collision_check_warning_id: getZodPrefixedIdWithDefault(
+    "cad_explosion_collision_check_warning"
+  ),
+  error_type: z205.literal("cad_explosion_collision_check_warning").default("cad_explosion_collision_check_warning"),
+  cad_explosion_stage_ids: z205.array(z205.string().min(1)).min(1),
+  cad_component_ids: z205.array(z205.string().min(1)),
+  pcb_board_ids: z205.array(z205.string().min(1)),
+  reason: z205.enum([
+    "unsupported_geometry",
+    "invalid_geometry",
+    "collision_check_failed"
+  ])
+}).describe(
+  "Explosion collision checking is incomplete for the referenced stages. Listed CAD components or PCBs were not checked; empty geometry lists with collision_check_failed indicate that the check itself could not run. This warning must not be interpreted as proof that the motion is clear."
+);
+expectTypesMatch(true);
+
+// src/cad/cad_cable.ts
+import { z as z206 } from "zod";
 var connectorPin1Position = point3.refine(
   (point2) => [point2.x, point2.y, point2.z].every(Number.isFinite),
   "Connector pin 1 positions must be finite"
 ).describe(
   "Resolved pin 1 position at the connector mating face, in right-handed circuit world, millimeters: +X right, +Y top, +Z above. An absolute point, not a direction. Computed by the circuit producer from endpoint geometry. Together with the endpoint path tangent, fixes connector roll and identifies its pin 1 side; renderers must not infer it from footprints."
 );
-var cad_cable = z204.object({
-  type: z204.literal("cad_cable"),
-  cad_cable_id: z204.string(),
-  name: z204.string().min(1),
-  from_source_component_id: z204.string(),
-  to_source_component_id: z204.string(),
+var cad_cable = z206.object({
+  type: z206.literal("cad_cable"),
+  cad_cable_id: z206.string(),
+  name: z206.string().min(1),
+  from_source_component_id: z206.string(),
+  to_source_component_id: z206.string(),
   from_connector_pin1_position: connectorPin1Position.optional(),
   to_connector_pin1_position: connectorPin1Position.optional(),
-  cableprinter_string: z204.string().min(1).describe(
+  cableprinter_string: z206.string().min(1).describe(
     'Physical cable definition, e.g. "usb_c" or "jst_ph_pins6". Independent of the route.'
   ),
-  path: z204.array(point3).min(2).refine(
+  path: z206.array(point3).min(2).refine(
     (path) => path.every(
       (point2, i) => [point2.x, point2.y, point2.z].every(Number.isFinite) && (i === 0 || Math.hypot(
         point2.x - path[i - 1].x,
@@ -4725,27 +4774,27 @@ var cad_cable = z204.object({
 expectTypesMatch(true);
 
 // src/cad/cad_reference_surface.ts
-import { z as z205 } from "zod";
+import { z as z207 } from "zod";
 var FRAME_TOLERANCE = 1e-6;
-var unitDirection = z205.object({
-  x: z205.number().finite(),
-  y: z205.number().finite(),
-  z: z205.number().finite()
+var unitDirection = z207.object({
+  x: z207.number().finite(),
+  y: z207.number().finite(),
+  z: z207.number().finite()
 }).refine(
   (v) => Math.abs(Math.hypot(v.x, v.y, v.z) - 1) <= FRAME_TOLERANCE,
   "Reference surface directions must be unit vectors"
 );
-var extent = distance.pipe(z205.number().finite().positive());
-var cad_reference_surface = z205.object({
-  type: z205.literal("cad_reference_surface"),
-  cad_reference_surface_id: z205.string().min(1),
-  source_component_id: z205.string().min(1).describe(
+var extent = distance.pipe(z207.number().finite().positive());
+var cad_reference_surface = z207.object({
+  type: z207.literal("cad_reference_surface"),
+  cad_reference_surface_id: z207.string().min(1),
+  source_component_id: z207.string().min(1).describe(
     "Owning assembly part's source component ID. The part may have no CAD geometry."
   ),
-  name: z205.string().trim().min(1).describe(
+  name: z207.string().trim().min(1).describe(
     "Reference name, unique within the owning part, e.g. shade in STEM.shade."
   ),
-  shape: z205.literal("rect"),
+  shape: z207.literal("rect"),
   center: point3.refine(
     (p) => [p.x, p.y, p.z].every(Number.isFinite),
     "Reference surface centers must be finite"
@@ -4764,18 +4813,18 @@ var cad_reference_surface = z205.object({
   height: extent.optional().describe(
     "Rectangular extent along normal cross x_axis in millimeters. Supply together with width."
   ),
-  subcircuit_id: z205.string().optional()
+  subcircuit_id: z207.string().optional()
 }).superRefine((surface, ctx) => {
   if (surface.width === void 0 !== (surface.height === void 0))
     ctx.addIssue({
-      code: z205.ZodIssueCode.custom,
+      code: z207.ZodIssueCode.custom,
       path: ["width"],
       message: "Provide width and height together"
     });
   const { normal: n, x_axis: x } = surface;
   if (Math.abs(n.x * x.x + n.y * x.y + n.z * x.z) > FRAME_TOLERANCE)
     ctx.addIssue({
-      code: z205.ZodIssueCode.custom,
+      code: z207.ZodIssueCode.custom,
       path: ["x_axis"],
       message: "x_axis must be perpendicular to normal"
     });
@@ -4787,18 +4836,18 @@ expectTypesMatch(
 );
 
 // src/cad/cad_explosion_stage.ts
-import { z as z206 } from "zod";
-var cad_explosion_stage = z206.object({
-  type: z206.literal("cad_explosion_stage"),
-  cad_explosion_stage_id: z206.string().min(1),
-  name: z206.string().min(1).describe("Qualified authored stage name, for display."),
-  order: z206.number().int().nonnegative().describe(
+import { z as z208 } from "zod";
+var cad_explosion_stage = z208.object({
+  type: z208.literal("cad_explosion_stage"),
+  cad_explosion_stage_id: z208.string().min(1),
+  name: z208.string().min(1).describe("Qualified authored stage name, for display."),
+  order: z208.number().int().nonnegative().describe(
     "Unique zero-based playback order after resolving authored stage dependencies. Array order is irrelevant."
   ),
-  cad_reference_surface_ids: z206.array(z206.string().min(1)).optional().describe(
+  cad_reference_surface_ids: z208.array(z208.string().min(1)).optional().describe(
     "Reference geometry belonging to this stage, including model-less assembly owners."
   ),
-  cad_component_ids: z206.array(z206.string().min(1)).describe(
+  cad_component_ids: z208.array(z208.string().min(1)).describe(
     "Explicit membership of this stage's moving assembly. May include an entire subassembly. A move targeting this stage translates every member once, preserving prior relative displacements; it does not execute the stage's moves."
   )
 }).describe(
@@ -4807,27 +4856,27 @@ var cad_explosion_stage = z206.object({
 expectTypesMatch(true);
 
 // src/cad/cad_explosion_move.ts
-import { z as z207 } from "zod";
-var cad_explosion_move = z207.object({
-  type: z207.literal("cad_explosion_move"),
-  cad_explosion_move_id: z207.string().min(1),
-  cad_explosion_stage_id: z207.string().min(1).describe("Stage executing this move."),
-  order: z207.number().int().nonnegative().describe(
+import { z as z209 } from "zod";
+var cad_explosion_move = z209.object({
+  type: z209.literal("cad_explosion_move"),
+  cad_explosion_move_id: z209.string().min(1),
+  cad_explosion_stage_id: z209.string().min(1).describe("Stage executing this move."),
+  order: z209.number().int().nonnegative().describe(
     "Unique zero-based sequential move order within the executing stage."
   ),
-  targets: z207.array(
-    z207.discriminatedUnion("type", [
-      z207.object({
-        type: z207.literal("cad_reference_surface"),
-        cad_reference_surface_id: z207.string().min(1)
+  targets: z209.array(
+    z209.discriminatedUnion("type", [
+      z209.object({
+        type: z209.literal("cad_reference_surface"),
+        cad_reference_surface_id: z209.string().min(1)
       }),
-      z207.object({
-        type: z207.literal("cad_component"),
-        cad_component_id: z207.string().min(1)
+      z209.object({
+        type: z209.literal("cad_component"),
+        cad_component_id: z209.string().min(1)
       }),
-      z207.object({
-        type: z207.literal("cad_explosion_stage"),
-        cad_explosion_stage_id: z207.string().min(1)
+      z209.object({
+        type: z209.literal("cad_explosion_stage"),
+        cad_explosion_stage_id: z209.string().min(1)
       })
     ])
   ).min(1).describe(
@@ -4845,9 +4894,9 @@ var cad_explosion_move = z207.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z208 } from "zod";
-var wave_shape = z208.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z208.union([z208.string(), z208.number()]).transform((val) => {
+import { z as z210 } from "zod";
+var wave_shape = z210.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z210.union([z210.string(), z210.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4856,32 +4905,32 @@ var percentage = z208.union([z208.string(), z208.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z208.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z210.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z208.object({
-  type: z208.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z210.object({
+  type: z210.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z208.literal(true).optional().default(true),
-  positive_source_port_id: z208.string().optional(),
-  negative_source_port_id: z208.string().optional(),
-  positive_source_net_id: z208.string().optional(),
-  negative_source_net_id: z208.string().optional(),
+  is_dc_source: z210.literal(true).optional().default(true),
+  positive_source_port_id: z210.string().optional(),
+  negative_source_port_id: z210.string().optional(),
+  positive_source_net_id: z210.string().optional(),
+  negative_source_net_id: z210.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z208.object({
-  type: z208.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z210.object({
+  type: z210.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z208.literal(false),
-  terminal1_source_port_id: z208.string().optional(),
-  terminal2_source_port_id: z208.string().optional(),
-  terminal1_source_net_id: z208.string().optional(),
-  terminal2_source_net_id: z208.string().optional(),
+  is_dc_source: z210.literal(false),
+  terminal1_source_port_id: z210.string().optional(),
+  terminal2_source_port_id: z210.string().optional(),
+  terminal1_source_net_id: z210.string().optional(),
+  terminal2_source_net_id: z210.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4896,14 +4945,14 @@ var simulation_ac_voltage_source = z208.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z208.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z210.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z209 } from "zod";
-var percentage2 = z209.union([z209.string(), z209.number()]).transform((val) => {
+import { z as z211 } from "zod";
+var percentage2 = z211.union([z211.string(), z211.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4912,32 +4961,32 @@ var percentage2 = z209.union([z209.string(), z209.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z209.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z211.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z209.object({
-  type: z209.literal("simulation_current_source"),
+var simulation_dc_current_source = z211.object({
+  type: z211.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z209.literal(true).optional().default(true),
-  positive_source_port_id: z209.string().optional(),
-  negative_source_port_id: z209.string().optional(),
-  positive_source_net_id: z209.string().optional(),
-  negative_source_net_id: z209.string().optional(),
+  is_dc_source: z211.literal(true).optional().default(true),
+  positive_source_port_id: z211.string().optional(),
+  negative_source_port_id: z211.string().optional(),
+  positive_source_net_id: z211.string().optional(),
+  negative_source_net_id: z211.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z209.object({
-  type: z209.literal("simulation_current_source"),
+var simulation_ac_current_source = z211.object({
+  type: z211.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z209.literal(false),
-  terminal1_source_port_id: z209.string().optional(),
-  terminal2_source_port_id: z209.string().optional(),
-  terminal1_source_net_id: z209.string().optional(),
-  terminal2_source_net_id: z209.string().optional(),
+  is_dc_source: z211.literal(false),
+  terminal1_source_port_id: z211.string().optional(),
+  terminal2_source_port_id: z211.string().optional(),
+  terminal1_source_net_id: z211.string().optional(),
+  terminal2_source_net_id: z211.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4947,64 +4996,64 @@ var simulation_ac_current_source = z209.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z209.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z211.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z211 } from "zod";
+import { z as z213 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z210 } from "zod";
-var simulation_dc_sweep_unit = z210.custom(
+import { z as z212 } from "zod";
+var simulation_dc_sweep_unit = z212.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z210.custom(
+var simulation_parameter_unit = z212.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z211.union([
-  z211.literal("spice_dc_sweep"),
-  z211.literal("spice_dc_operating_point"),
-  z211.literal("spice_transient_analysis"),
-  z211.literal("spice_ac_analysis"),
-  z211.literal("pcb_return_current")
+var experiment_type = z213.union([
+  z213.literal("spice_dc_sweep"),
+  z213.literal("spice_dc_operating_point"),
+  z213.literal("spice_transient_analysis"),
+  z213.literal("spice_ac_analysis"),
+  z213.literal("pcb_return_current")
 ]);
-var spice_simulation_options = z211.object({
-  method: z211.enum(["trap", "gear"]).optional(),
-  reltol: z211.union([z211.number(), z211.string()]).optional(),
-  abstol: z211.union([z211.number(), z211.string()]).optional(),
-  vntol: z211.union([z211.number(), z211.string()]).optional()
+var spice_simulation_options = z213.object({
+  method: z213.enum(["trap", "gear"]).optional(),
+  reltol: z213.union([z213.number(), z213.string()]).optional(),
+  abstol: z213.union([z213.number(), z213.string()]).optional(),
+  vntol: z213.union([z213.number(), z213.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var pcb_spice_channel = z211.object({
-  reduction: z211.union([
-    z211.literal("routed-copper"),
-    z211.literal("straightened-stages")
+var pcb_spice_channel = z213.object({
+  reduction: z213.union([
+    z213.literal("routed-copper"),
+    z213.literal("straightened-stages")
   ]),
-  sections: z211.number().int().min(1).max(128),
-  lanes: z211.array(
-    z211.object({
-      name: z211.string().min(1),
-      driver_source_port_id: z211.string().min(1),
-      receiver_source_port_id: z211.string().min(1)
+  sections: z213.number().int().min(1).max(128),
+  lanes: z213.array(
+    z213.object({
+      name: z213.string().min(1),
+      driver_source_port_id: z213.string().min(1),
+      receiver_source_port_id: z213.string().min(1)
     })
   ).min(1).max(3),
-  reference_source_port_id: z211.string().min(1),
-  passive_source_component_ids: z211.array(z211.string().min(1)).optional(),
-  extraction: z211.object({
-    minimum_frequency_hz: z211.number().finite().positive(),
-    maximum_frequency_hz: z211.number().finite().positive(),
-    model_frequency_hz: z211.number().finite().positive(),
-    filaments: z211.number().int().positive(),
-    refinement_filaments: z211.number().int().positive(),
-    convergence_tolerance: z211.number().finite().positive(),
-    capacitance_tolerance: z211.number().finite().positive(),
-    reciprocity_tolerance: z211.number().finite().positive(),
-    dc_resistance_tolerance: z211.number().finite().positive(),
-    max_panel_length_mm: z211.number().finite().positive(),
-    ground_mesh_size_mm: z211.number().finite().positive().optional()
+  reference_source_port_id: z213.string().min(1),
+  passive_source_component_ids: z213.array(z213.string().min(1)).optional(),
+  extraction: z213.object({
+    minimum_frequency_hz: z213.number().finite().positive(),
+    maximum_frequency_hz: z213.number().finite().positive(),
+    model_frequency_hz: z213.number().finite().positive(),
+    filaments: z213.number().int().positive(),
+    refinement_filaments: z213.number().int().positive(),
+    convergence_tolerance: z213.number().finite().positive(),
+    capacitance_tolerance: z213.number().finite().positive(),
+    reciprocity_tolerance: z213.number().finite().positive(),
+    dc_resistance_tolerance: z213.number().finite().positive(),
+    max_panel_length_mm: z213.number().finite().positive(),
+    ground_mesh_size_mm: z213.number().finite().positive().optional()
   }).refine(
     (extraction) => extraction.refinement_filaments > extraction.filaments,
     {
@@ -5012,50 +5061,50 @@ var pcb_spice_channel = z211.object({
       message: "refinement_filaments must be greater than filaments"
     }
   ),
-  relative_permittivity: z211.number().finite().positive().optional(),
-  via_plating_thickness_mm: z211.number().finite().positive().optional(),
-  via_equivalent_width_mm: z211.number().finite().positive().optional(),
-  omit_through_via_stubs: z211.boolean().optional(),
-  straightened_stage_profiles: z211.record(
-    z211.object({
-      spacing_mm: z211.number().finite().positive(),
-      relative_permittivity: z211.number().finite().positive(),
-      return: z211.object({
-        width_mm: z211.number().finite().positive(),
-        thickness_mm: z211.number().finite().positive(),
-        length_factor: z211.number().finite().positive(),
-        center_y_mm: z211.number().finite(),
-        center_z_mm: z211.number().finite()
+  relative_permittivity: z213.number().finite().positive().optional(),
+  via_plating_thickness_mm: z213.number().finite().positive().optional(),
+  via_equivalent_width_mm: z213.number().finite().positive().optional(),
+  omit_through_via_stubs: z213.boolean().optional(),
+  straightened_stage_profiles: z213.record(
+    z213.object({
+      spacing_mm: z213.number().finite().positive(),
+      relative_permittivity: z213.number().finite().positive(),
+      return: z213.object({
+        width_mm: z213.number().finite().positive(),
+        thickness_mm: z213.number().finite().positive(),
+        length_factor: z213.number().finite().positive(),
+        center_y_mm: z213.number().finite(),
+        center_z_mm: z213.number().finite()
       })
     })
   ).optional()
 });
 expectTypesMatch(true);
-var simulation_experiment = z211.object({
-  type: z211.literal("simulation_experiment"),
+var simulation_experiment = z213.object({
+  type: z213.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z211.string(),
+  name: z213.string(),
   experiment_type,
-  subcircuit_id: z211.string().optional(),
-  spice_engine: z211.string().optional(),
+  subcircuit_id: z213.string().optional(),
+  spice_engine: z213.string().optional(),
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
   pcb_spice_channel: pcb_spice_channel.optional(),
-  dc_sweep_voltage_source_id: z211.string().optional(),
-  dc_sweep_current_source_id: z211.string().optional(),
-  dc_sweep_start: z211.number().optional(),
-  dc_sweep_stop: z211.number().optional(),
-  dc_sweep_step: z211.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z213.string().optional(),
+  dc_sweep_current_source_id: z213.string().optional(),
+  dc_sweep_start: z213.number().optional(),
+  dc_sweep_stop: z213.number().optional(),
+  dc_sweep_step: z213.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z211.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z211.number().int().positive().optional(),
-  ac_sample_count: z211.number().int().positive().optional(),
-  ac_start_frequency_hz: z211.number().positive().optional(),
-  ac_stop_frequency_hz: z211.number().positive().optional()
+  ac_sweep_type: z213.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z213.number().int().positive().optional(),
+  ac_sample_count: z213.number().int().positive().optional(),
+  ac_start_frequency_hz: z213.number().positive().optional(),
+  ac_stop_frequency_hz: z213.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -5067,7 +5116,7 @@ var simulation_experiment = z211.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z211.ZodIssueCode.custom,
+          code: z213.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -5077,7 +5126,7 @@ var simulation_experiment = z211.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -5086,35 +5135,35 @@ var simulation_experiment = z211.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -5124,88 +5173,88 @@ var simulation_experiment = z211.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z213 } from "zod";
+import { z as z215 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z212 } from "zod";
-var simulation_parameter_sweep_coordinate = z212.object({
-  simulation_parameter_sweep_id: z212.string(),
-  sweep_index: z212.number().int().nonnegative(),
-  parameter_value: z212.number(),
+import { z as z214 } from "zod";
+var simulation_parameter_sweep_coordinate = z214.object({
+  simulation_parameter_sweep_id: z214.string(),
+  sweep_index: z214.number().int().nonnegative(),
+  parameter_value: z214.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z213.object({
-  type: z213.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z215.object({
+  type: z215.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z213.string(),
-  simulation_voltage_probe_id: z213.string().optional(),
+  simulation_experiment_id: z215.string(),
+  simulation_voltage_probe_id: z215.string().optional(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z213.array(z213.number()).optional(),
-  voltage_levels: z213.array(z213.number()),
-  source_component_id: z213.string().optional(),
-  subcircuit_connectivity_map_key: z213.string().optional(),
+  timestamps_ms: z215.array(z215.number()).optional(),
+  voltage_levels: z215.array(z215.number()),
+  source_component_id: z215.string().optional(),
+  subcircuit_connectivity_map_key: z215.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z213.string().optional(),
-  color: z213.string().optional()
+  name: z215.string().optional(),
+  color: z215.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z214 } from "zod";
-var simulation_transient_current_graph = z214.object({
-  type: z214.literal("simulation_transient_current_graph"),
+import { z as z216 } from "zod";
+var simulation_transient_current_graph = z216.object({
+  type: z216.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z214.string(),
+  simulation_experiment_id: z216.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z214.array(z214.number()).optional(),
-  current_levels: z214.array(z214.number()),
-  source_component_id: z214.string().optional(),
-  subcircuit_connectivity_map_key: z214.string().optional(),
+  timestamps_ms: z216.array(z216.number()).optional(),
+  current_levels: z216.array(z216.number()),
+  source_component_id: z216.string().optional(),
+  subcircuit_connectivity_map_key: z216.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z214.string().optional(),
-  color: z214.string().optional()
+  name: z216.string().optional(),
+  color: z216.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z215 } from "zod";
-var simulation_switch = z215.object({
-  type: z215.literal("simulation_switch"),
+import { z as z217 } from "zod";
+var simulation_switch = z217.object({
+  type: z217.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z215.string().optional(),
+  source_component_id: z217.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z215.boolean().optional(),
+  starts_closed: z217.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z216 } from "zod";
-var simulation_voltage_probe = z216.object({
-  type: z216.literal("simulation_voltage_probe"),
+import { z as z218 } from "zod";
+var simulation_voltage_probe = z218.object({
+  type: z218.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z216.string().optional(),
-  name: z216.string().optional(),
-  signal_input_source_port_id: z216.string().optional(),
-  signal_input_source_net_id: z216.string().optional(),
-  reference_input_source_port_id: z216.string().optional(),
-  reference_input_source_net_id: z216.string().optional(),
-  subcircuit_id: z216.string().optional(),
-  color: z216.string().optional()
+  source_component_id: z218.string().optional(),
+  name: z218.string().optional(),
+  signal_input_source_port_id: z218.string().optional(),
+  signal_input_source_net_id: z218.string().optional(),
+  reference_input_source_port_id: z218.string().optional(),
+  reference_input_source_net_id: z218.string().optional(),
+  subcircuit_id: z218.string().optional(),
+  color: z218.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -5215,20 +5264,20 @@ var simulation_voltage_probe = z216.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z216.ZodIssueCode.custom,
+        code: z218.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z216.ZodIssueCode.custom,
+          code: z218.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z216.ZodIssueCode.custom,
+          code: z218.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -5236,7 +5285,7 @@ var simulation_voltage_probe = z216.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z216.ZodIssueCode.custom,
+        code: z218.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -5245,20 +5294,20 @@ var simulation_voltage_probe = z216.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z217 } from "zod";
-var simulation_current_probe = z217.object({
-  type: z217.literal("simulation_current_probe"),
+import { z as z219 } from "zod";
+var simulation_current_probe = z219.object({
+  type: z219.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z217.string().optional(),
-  name: z217.string().optional(),
-  positive_source_port_id: z217.string().optional(),
-  negative_source_port_id: z217.string().optional(),
-  positive_source_net_id: z217.string().optional(),
-  negative_source_net_id: z217.string().optional(),
-  subcircuit_id: z217.string().optional(),
-  color: z217.string().optional()
+  source_component_id: z219.string().optional(),
+  name: z219.string().optional(),
+  positive_source_port_id: z219.string().optional(),
+  negative_source_port_id: z219.string().optional(),
+  positive_source_net_id: z219.string().optional(),
+  negative_source_net_id: z219.string().optional(),
+  subcircuit_id: z219.string().optional(),
+  color: z219.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -5270,7 +5319,7 @@ var simulation_current_probe = z217.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z217.ZodIssueCode.custom,
+      code: z219.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -5278,7 +5327,7 @@ var simulation_current_probe = z217.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z217.ZodIssueCode.custom,
+        code: z219.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -5287,71 +5336,71 @@ var simulation_current_probe = z217.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z217.ZodIssueCode.custom,
+        code: z219.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z217.ZodIssueCode.custom,
+    code: z219.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z218 } from "zod";
+import { z as z220 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z218.literal("simulation_unknown_experiment_error"),
+  type: z220.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z218.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z218.string().optional(),
-  subcircuit_id: z218.string().optional()
+  error_type: z220.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z220.string().optional(),
+  subcircuit_id: z220.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z219 } from "zod";
-var simulation_parameter_type = z219.enum([
+import { z as z221 } from "zod";
+var simulation_parameter_type = z221.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z219.object({
-  type: z219.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z221.object({
+  type: z221.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z219.string(),
-  name: z219.string().optional(),
-  parameter_values: z219.array(z219.number()).min(1),
+  simulation_experiment_id: z221.string(),
+  name: z221.string().optional(),
+  parameter_values: z221.array(z221.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z219.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z221.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z219.literal("resistance"),
-    resistor_source_component_id: z219.string()
+    parameter_type: z221.literal("resistance"),
+    resistor_source_component_id: z221.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z219.literal("capacitance"),
-    capacitor_source_component_id: z219.string()
+    parameter_type: z221.literal("capacitance"),
+    capacitor_source_component_id: z221.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z219.literal("inductance"),
-    inductor_source_component_id: z219.string()
+    parameter_type: z221.literal("inductance"),
+    inductor_source_component_id: z221.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z219.literal("voltage"),
-    source_net_id: z219.string()
+    parameter_type: z221.literal("voltage"),
+    source_net_id: z221.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z219.literal("current"),
-    current_source_component_id: z219.string()
+    parameter_type: z221.literal("current"),
+    current_source_component_id: z221.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -5359,52 +5408,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z220 } from "zod";
-var simulation_dc_operating_point_voltage = z220.object({
-  type: z220.literal("simulation_dc_operating_point_voltage"),
+import { z as z222 } from "zod";
+var simulation_dc_operating_point_voltage = z222.object({
+  type: z222.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z220.string(),
+  simulation_experiment_id: z222.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z220.string(),
-  voltage: z220.number(),
-  name: z220.string().optional(),
-  color: z220.string().optional()
+  simulation_voltage_probe_id: z222.string(),
+  voltage: z222.number(),
+  name: z222.string().optional(),
+  color: z222.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z221 } from "zod";
-var simulation_dc_operating_point_current = z221.object({
-  type: z221.literal("simulation_dc_operating_point_current"),
+import { z as z223 } from "zod";
+var simulation_dc_operating_point_current = z223.object({
+  type: z223.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z221.string(),
+  simulation_experiment_id: z223.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z221.string(),
-  current: z221.number(),
-  name: z221.string().optional(),
-  color: z221.string().optional()
+  simulation_current_probe_id: z223.string(),
+  current: z223.number(),
+  name: z223.string().optional(),
+  color: z223.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z222 } from "zod";
-var simulation_dc_sweep_voltage_graph = z222.object({
-  type: z222.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z224 } from "zod";
+var simulation_dc_sweep_voltage_graph = z224.object({
+  type: z224.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z222.string(),
+  simulation_experiment_id: z224.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z222.string(),
-  sweep_values: z222.array(z222.number()),
+  simulation_voltage_probe_id: z224.string(),
+  sweep_values: z224.array(z224.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z222.array(z222.number()),
-  name: z222.string().optional(),
-  color: z222.string().optional()
+  voltage_levels: z224.array(z224.number()),
+  name: z224.string().optional(),
+  color: z224.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -5414,20 +5463,20 @@ var simulation_dc_sweep_voltage_graph = z222.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z223 } from "zod";
-var simulation_dc_sweep_current_graph = z223.object({
-  type: z223.literal("simulation_dc_sweep_current_graph"),
+import { z as z225 } from "zod";
+var simulation_dc_sweep_current_graph = z225.object({
+  type: z225.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z223.string(),
+  simulation_experiment_id: z225.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z223.string(),
-  sweep_values: z223.array(z223.number()),
+  simulation_current_probe_id: z225.string(),
+  sweep_values: z225.array(z225.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z223.array(z223.number()),
-  name: z223.string().optional(),
-  color: z223.string().optional()
+  current_levels: z225.array(z225.number()),
+  name: z225.string().optional(),
+  color: z225.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -5437,29 +5486,29 @@ var simulation_dc_sweep_current_graph = z223.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z225 } from "zod";
+import { z as z227 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z224 } from "zod";
-var simulation_complex_sample = z224.object({
-  re: z224.number(),
-  im: z224.number()
+import { z as z226 } from "zod";
+var simulation_complex_sample = z226.object({
+  re: z226.number(),
+  im: z226.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z225.object({
-  type: z225.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z227.object({
+  type: z227.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z225.string(),
+  simulation_experiment_id: z227.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z225.string(),
-  frequencies_hz: z225.array(z225.number()),
-  complex_voltages: z225.array(simulation_complex_sample),
-  name: z225.string().optional(),
-  color: z225.string().optional()
+  simulation_voltage_probe_id: z227.string(),
+  frequencies_hz: z227.array(z227.number()),
+  complex_voltages: z227.array(simulation_complex_sample),
+  name: z227.string().optional(),
+  color: z227.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -5469,19 +5518,19 @@ var simulation_ac_sweep_voltage_graph = z225.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z226 } from "zod";
-var simulation_ac_sweep_current_graph = z226.object({
-  type: z226.literal("simulation_ac_sweep_current_graph"),
+import { z as z228 } from "zod";
+var simulation_ac_sweep_current_graph = z228.object({
+  type: z228.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z226.string(),
+  simulation_experiment_id: z228.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z226.string(),
-  frequencies_hz: z226.array(z226.number()),
-  complex_currents: z226.array(simulation_complex_sample),
-  name: z226.string().optional(),
-  color: z226.string().optional()
+  simulation_current_probe_id: z228.string(),
+  frequencies_hz: z228.array(z228.number()),
+  complex_currents: z228.array(simulation_complex_sample),
+  name: z228.string().optional(),
+  color: z228.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -5491,52 +5540,52 @@ var simulation_ac_sweep_current_graph = z226.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z227 } from "zod";
-var simulation_op_amp = z227.object({
-  type: z227.literal("simulation_op_amp"),
+import { z as z229 } from "zod";
+var simulation_op_amp = z229.object({
+  type: z229.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z227.string().optional(),
-  inverting_input_source_port_id: z227.string(),
-  non_inverting_input_source_port_id: z227.string(),
-  output_source_port_id: z227.string(),
-  positive_supply_source_port_id: z227.string(),
-  negative_supply_source_port_id: z227.string()
+  source_component_id: z229.string().optional(),
+  inverting_input_source_port_id: z229.string(),
+  non_inverting_input_source_port_id: z229.string(),
+  output_source_port_id: z229.string(),
+  positive_supply_source_port_id: z229.string(),
+  negative_supply_source_port_id: z229.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z228 } from "zod";
-var simulation_spice_subcircuit = z228.object({
-  type: z228.literal("simulation_spice_subcircuit"),
+import { z as z230 } from "zod";
+var simulation_spice_subcircuit = z230.object({
+  type: z230.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z228.string(),
-  spice_pin_to_source_port_map: z228.record(z228.string(), z228.string()),
-  subcircuit_source: z228.string()
+  source_component_id: z230.string(),
+  spice_pin_to_source_port_map: z230.record(z230.string(), z230.string()),
+  subcircuit_source: z230.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z229 } from "zod";
+import { z as z231 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z229.object({
-  type: z229.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z231.object({
+  type: z231.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z229.string().optional(),
-  simulation_transient_current_graph_id: z229.string().optional(),
-  simulation_voltage_probe_id: z229.string().optional(),
-  simulation_current_probe_id: z229.string().optional(),
-  display_name: z229.string().optional(),
-  color: z229.string().optional(),
-  display_center_value: z229.number().optional(),
-  display_center_offset_divs: z229.number().optional(),
-  volts_per_div: z229.number().positive().optional(),
-  amps_per_div: z229.number().positive().optional()
+  simulation_transient_voltage_graph_id: z231.string().optional(),
+  simulation_transient_current_graph_id: z231.string().optional(),
+  simulation_voltage_probe_id: z231.string().optional(),
+  simulation_current_probe_id: z231.string().optional(),
+  display_name: z231.string().optional(),
+  color: z231.string().optional(),
+  display_center_value: z231.number().optional(),
+  display_center_offset_divs: z231.number().optional(),
+  volts_per_div: z231.number().positive().optional(),
+  amps_per_div: z231.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -5550,19 +5599,19 @@ var simulation_oscilloscope_trace = z229.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z229.ZodIssueCode.custom,
+      code: z231.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z229.ZodIssueCode.custom,
+      code: z231.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z229.ZodIssueCode.custom,
+      code: z231.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -5570,47 +5619,47 @@ var simulation_oscilloscope_trace = z229.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ibis_model.ts
-import { z as z230 } from "zod";
-var ibisAssetPath = z230.string().min(1).regex(/^(?!\s|[a-z][a-z\d+.-]*:|[/\\])[^\\\u0000-\u001f\u007f]+$/i);
-var simulation_ibis_model = z230.object({
-  type: z230.literal("simulation_ibis_model"),
+import { z as z232 } from "zod";
+var ibisAssetPath = z232.string().min(1).regex(/^(?!\s|[a-z][a-z\d+.-]*:|[/\\])[^\\\u0000-\u001f\u007f]+$/i);
+var simulation_ibis_model = z232.object({
+  type: z232.literal("simulation_ibis_model"),
   simulation_ibis_model_id: getZodPrefixedIdWithDefault(
     "simulation_ibis_model"
   ),
-  source_component_id: z230.string().min(1),
+  source_component_id: z232.string().min(1),
   // Consumers must still apply their own fetch policy to prevent SSRF.
   ibis_model_asset: asset.extend({
     project_relative_path: ibisAssetPath,
-    url: z230.string().url().regex(/^https?:\/\//i).or(ibisAssetPath)
+    url: z232.string().url().regex(/^https?:\/\//i).or(ibisAssetPath)
   }).describe(
     "Reference to the .ibs file containing the vendor's IBIS models"
   ),
-  ibis_component_name: z230.string().min(1).describe("Name of the [Component] section in the IBIS file"),
-  ibis_pin_name_to_source_port_id: z230.record(z230.string().min(1), z230.string().min(1)).refine(
+  ibis_component_name: z232.string().min(1).describe("Name of the [Component] section in the IBIS file"),
+  ibis_pin_name_to_source_port_id: z232.record(z232.string().min(1), z232.string().min(1)).refine(
     (pins) => Object.keys(pins).length > 0,
     "At least one physical IBIS pin is required"
   ).describe(
     "Maps pin names from the IBIS [Pin] table, such as A1 or 12, to physical source_port_id values"
   ),
-  ibis_pin_name_to_model_name: z230.record(z230.string().min(1), z230.string().min(1)).optional().describe(
+  ibis_pin_name_to_model_name: z232.record(z232.string().min(1), z232.string().min(1)).optional().describe(
     "Maps an IBIS pin name to the selected [Model] name when its [Model Selector] has multiple buffers"
   ),
-  ibis_pin_name_to_reference_source_port_ids: z230.record(
-    z230.string().min(1),
-    z230.object({
-      pullup_reference_source_port_id: z230.string().min(1).optional(),
-      pulldown_reference_source_port_id: z230.string().min(1).optional(),
-      power_clamp_reference_source_port_id: z230.string().min(1).optional(),
-      ground_clamp_reference_source_port_id: z230.string().min(1).optional(),
-      external_reference_source_port_id: z230.string().min(1).optional()
+  ibis_pin_name_to_reference_source_port_ids: z232.record(
+    z232.string().min(1),
+    z232.object({
+      pullup_reference_source_port_id: z232.string().min(1).optional(),
+      pulldown_reference_source_port_id: z232.string().min(1).optional(),
+      power_clamp_reference_source_port_id: z232.string().min(1).optional(),
+      ground_clamp_reference_source_port_id: z232.string().min(1).optional(),
+      external_reference_source_port_id: z232.string().min(1).optional()
     }).strict()
   ).optional().describe(
     "Maps each IBIS signal pin name to the physical source ports used as its buffer supply/clamp references"
   ),
-  model_value_corner: z230.union([z230.literal("typical"), z230.literal("minimum"), z230.literal("maximum")]).describe(
+  model_value_corner: z232.union([z232.literal("typical"), z232.literal("minimum"), z232.literal("maximum")]).describe(
     "Selects the typ, min, or max column of numerical data in the IBIS model"
   ),
-  include_package_parasitics: z230.boolean().describe(
+  include_package_parasitics: z232.boolean().describe(
     "Whether the runner includes the IBIS vendor's package resistance, inductance, and capacitance"
   )
 }).superRefine((model, context) => {
@@ -5624,7 +5673,7 @@ var simulation_ibis_model = z230.object({
     for (const pin of Object.keys(model[field] ?? {})) {
       if (!boundPins.has(pin)) {
         context.addIssue({
-          code: z230.ZodIssueCode.custom,
+          code: z232.ZodIssueCode.custom,
           path: [field, pin],
           message: `IBIS pin "${pin}" must be bound in ibis_pin_name_to_source_port_id`
         });
@@ -5636,22 +5685,22 @@ var simulation_ibis_model = z230.object({
 );
 
 // src/simulation/simulation_ibis_pin_state.ts
-import { z as z231 } from "zod";
-var simulation_ibis_pin_state = z231.object({
-  type: z231.literal("simulation_ibis_pin_state"),
+import { z as z233 } from "zod";
+var simulation_ibis_pin_state = z233.object({
+  type: z233.literal("simulation_ibis_pin_state"),
   simulation_ibis_pin_state_id: getZodPrefixedIdWithDefault(
     "simulation_ibis_pin_state"
   ),
-  simulation_experiment_id: z231.string().min(1),
-  source_port_id: z231.string().min(1),
-  is_output: z231.boolean().describe(
+  simulation_experiment_id: z233.string().min(1),
+  source_port_id: z233.string().min(1),
+  is_output: z233.boolean().describe(
     "True selects output mode; false selects input mode for this experiment"
   ),
-  is_output_enabled: z231.boolean().optional()
+  is_output_enabled: z233.boolean().optional()
 }).superRefine((pin, context) => {
   if (pin.is_output && pin.is_output_enabled === void 0 || !pin.is_output && pin.is_output_enabled !== void 0) {
     context.addIssue({
-      code: z231.ZodIssueCode.custom,
+      code: z233.ZodIssueCode.custom,
       path: ["is_output_enabled"],
       message: "Only output pins require an explicit is_output_enabled boolean"
     });
@@ -5661,41 +5710,41 @@ var simulation_ibis_pin_state = z231.object({
 );
 
 // src/simulation/simulation_digital_stimulus.ts
-import { z as z232 } from "zod";
+import { z as z234 } from "zod";
 var MAX_PATTERN_BITS = 65536;
-var simulation_digital_stimulus = z232.object({
-  type: z232.literal("simulation_digital_stimulus"),
+var simulation_digital_stimulus = z234.object({
+  type: z234.literal("simulation_digital_stimulus"),
   simulation_digital_stimulus_id: getZodPrefixedIdWithDefault(
     "simulation_digital_stimulus"
   ),
-  name: z232.string().min(1),
-  simulation_experiment_id: z232.string().min(1),
-  source_port_id: z232.string().min(1),
+  name: z234.string().min(1),
+  simulation_experiment_id: z234.string().min(1),
+  source_port_id: z234.string().min(1),
   bit_duration_ms: ms.refine((milliseconds) => milliseconds > 0),
   start_time_ms: ms.refine((milliseconds) => milliseconds >= 0),
-  initial_state: z232.union([z232.literal(0), z232.literal(1)]),
-  inverted: z232.boolean(),
-  transmission_pattern: z232.object({
-    transmission_type: z232.literal("bits"),
-    bits: z232.string().max(MAX_PATTERN_BITS).regex(/^[01]+$/).or(
-      z232.array(z232.union([z232.literal(0), z232.literal(1)])).min(1).max(MAX_PATTERN_BITS)
+  initial_state: z234.union([z234.literal(0), z234.literal(1)]),
+  inverted: z234.boolean(),
+  transmission_pattern: z234.object({
+    transmission_type: z234.literal("bits"),
+    bits: z234.string().max(MAX_PATTERN_BITS).regex(/^[01]+$/).or(
+      z234.array(z234.union([z234.literal(0), z234.literal(1)])).min(1).max(MAX_PATTERN_BITS)
     ),
-    repeat: z232.boolean()
+    repeat: z234.boolean()
   }).strict()
 }).describe(
   "Declares a digital transmission pattern and bit duration in milliseconds for a physical source port"
 );
 
 // src/simulation/simulation_eye_diagram.ts
-import { z as z233 } from "zod";
-var simulation_eye_diagram = z233.object({
-  type: z233.literal("simulation_eye_diagram"),
+import { z as z235 } from "zod";
+var simulation_eye_diagram = z235.object({
+  type: z235.literal("simulation_eye_diagram"),
   simulation_eye_diagram_id: getZodPrefixedIdWithDefault(
     "simulation_eye_diagram"
   ),
-  name: z233.string().min(1),
-  simulation_experiment_id: z233.string().min(1),
-  simulation_voltage_probe_id: z233.string().min(1),
+  name: z235.string().min(1),
+  simulation_experiment_id: z235.string().min(1),
+  simulation_voltage_probe_id: z235.string().min(1),
   unit_interval_ms: ms.refine((milliseconds) => milliseconds > 0),
   time_origin_ms: ms,
   start_time_ms: ms.refine((milliseconds) => milliseconds >= 0).optional(),
@@ -5703,7 +5752,7 @@ var simulation_eye_diagram = z233.object({
 }).superRefine((eye, context) => {
   if (eye.start_time_ms !== void 0 && eye.end_time_ms !== void 0 && eye.start_time_ms >= eye.end_time_ms) {
     context.addIssue({
-      code: z233.ZodIssueCode.custom,
+      code: z235.ZodIssueCode.custom,
       path: ["end_time_ms"],
       message: "Eye gate end must follow its start"
     });
@@ -5713,51 +5762,51 @@ var simulation_eye_diagram = z233.object({
 );
 
 // src/simulation/simulation_return_current_contact.ts
-import { z as z234 } from "zod";
-var contact_position = z234.object({
-  x: z234.number().finite(),
-  y: z234.number().finite(),
+import { z as z236 } from "zod";
+var contact_position = z236.object({
+  x: z236.number().finite(),
+  y: z236.number().finite(),
   layer: layer_ref
 });
-var simulation_return_current_contact = z234.discriminatedUnion("contact_type", [
+var simulation_return_current_contact = z236.discriminatedUnion("contact_type", [
   contact_position.extend({
-    contact_type: z234.literal("pcb_port"),
-    pcb_port_id: z234.string().min(1)
+    contact_type: z236.literal("pcb_port"),
+    pcb_port_id: z236.string().min(1)
   }),
   contact_position.extend({
-    contact_type: z234.literal("pcb_via"),
-    pcb_via_id: z234.string().min(1)
+    contact_type: z236.literal("pcb_via"),
+    pcb_via_id: z236.string().min(1)
   }),
   contact_position.extend({
-    contact_type: z234.literal("pcb_copper_pour"),
-    pcb_copper_pour_id: z234.string().min(1)
+    contact_type: z236.literal("pcb_copper_pour"),
+    pcb_copper_pour_id: z236.string().min(1)
   })
 ]).describe("Identifies the reference conductor at a return-current contact");
 expectTypesMatch(true);
 
 // src/simulation/simulation_terminal_port.ts
-import { z as z235 } from "zod";
-var simulation_terminal_port = z235.object({
-  signal_pcb_port_id: z235.string().min(1),
-  reference_pcb_port_id: z235.string().min(1).optional(),
+import { z as z237 } from "zod";
+var simulation_terminal_port = z237.object({
+  signal_pcb_port_id: z237.string().min(1),
+  reference_pcb_port_id: z237.string().min(1).optional(),
   reference_layer: layer_ref,
-  resistance: z235.number().finite().positive()
+  resistance: z237.number().finite().positive()
 }).describe(
   "A two-terminal return-current excitation port with resistance in ohms"
 );
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_excitation.ts
-import { z as z236 } from "zod";
-var simulation_return_current_excitation = z236.object({
-  type: z236.literal("simulation_return_current_excitation"),
+import { z as z238 } from "zod";
+var simulation_return_current_excitation = z238.object({
+  type: z238.literal("simulation_return_current_excitation"),
   simulation_return_current_excitation_id: getZodPrefixedIdWithDefault(
     "simulation_return_current_excitation"
   ),
-  simulation_experiment_id: z236.string().min(1),
-  pcb_trace_id: z236.string().min(1),
-  ground_source_net_id: z236.string().min(1),
-  current: z236.number().finite(),
+  simulation_experiment_id: z238.string().min(1),
+  pcb_trace_id: z238.string().min(1),
+  ground_source_net_id: z238.string().min(1),
+  current: z238.number().finite(),
   return_source: simulation_return_current_contact,
   return_sink: simulation_return_current_contact,
   source_port: simulation_terminal_port.optional(),
@@ -5768,34 +5817,34 @@ var simulation_return_current_excitation = z236.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_pcb_return_current_result.ts
-import { z as z237 } from "zod";
-var simulation_pcb_return_current_result = z237.object({
-  type: z237.literal("simulation_pcb_return_current_result"),
+import { z as z239 } from "zod";
+var simulation_pcb_return_current_result = z239.object({
+  type: z239.literal("simulation_pcb_return_current_result"),
   simulation_pcb_return_current_result_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_result"
   ),
-  simulation_experiment_id: z237.string().min(1),
-  pcb_board_id: z237.string().min(1),
-  simulation_return_current_excitation_ids: z237.array(z237.string().min(1)).min(1).refine(
+  simulation_experiment_id: z239.string().min(1),
+  pcb_board_id: z239.string().min(1),
+  simulation_return_current_excitation_ids: z239.array(z239.string().min(1)).min(1).refine(
     (ids) => new Set(ids).size === ids.length,
     "Excitation IDs must be unique"
   ),
-  frequency_hz: z237.number().finite().positive().optional()
+  frequency_hz: z239.number().finite().positive().optional()
 }).describe(
   "A PCB return-current result at one frequency, or a frequency-independent result when frequency_hz is absent"
 );
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_asset.ts
-import { z as z238 } from "zod";
+import { z as z240 } from "zod";
 function createSimulationReturnCurrentAssetSchema(mimetypes) {
   return asset.extend({
-    project_relative_path: z238.string().min(1),
-    url: z238.string().url()
+    project_relative_path: z240.string().min(1),
+    url: z240.string().url()
   }).superRefine((value, context) => {
     if (!mimetypes.includes(value.mimetype)) {
       context.addIssue({
-        code: z238.ZodIssueCode.custom,
+        code: z240.ZodIssueCode.custom,
         path: ["mimetype"],
         message: `Expected one of: ${mimetypes.join(", ")}`
       });
@@ -5804,7 +5853,7 @@ function createSimulationReturnCurrentAssetSchema(mimetypes) {
       const mediaType = /^data:([^;,]*)(?:;[^,]*)?,/i.exec(value.url)?.[1];
       if (mediaType?.toLowerCase() !== value.mimetype) {
         context.addIssue({
-          code: z238.ZodIssueCode.custom,
+          code: z240.ZodIssueCode.custom,
           path: ["url"],
           message: "Data URL media type must match asset.mimetype"
         });
@@ -5819,29 +5868,29 @@ var simulation_return_current_field_asset = createSimulationReturnCurrentAssetSc
 var simulation_return_current_image_asset = createSimulationReturnCurrentAssetSchema(["image/png", "image/webp"]);
 
 // src/simulation/simulation_pcb_return_current_field.ts
-import { z as z239 } from "zod";
-var simulation_pcb_return_current_field = z239.object({
-  type: z239.literal("simulation_pcb_return_current_field"),
+import { z as z241 } from "zod";
+var simulation_pcb_return_current_field = z241.object({
+  type: z241.literal("simulation_pcb_return_current_field"),
   simulation_pcb_return_current_field_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_field"
   ),
-  simulation_pcb_return_current_result_id: z239.string().min(1),
+  simulation_pcb_return_current_result_id: z241.string().min(1),
   layer: layer_ref,
-  source_net_id: z239.string().min(1),
-  field_type: z239.enum(["real", "complex_phasor"]),
-  min_x: z239.number().finite(),
-  min_y: z239.number().finite(),
-  columns: z239.number().int().positive().safe(),
-  rows: z239.number().int().positive().safe(),
-  cell_width: z239.number().finite().positive(),
-  cell_height: z239.number().finite().positive(),
-  copper_thickness: z239.number().finite().positive(),
-  data_format: z239.literal("simulation_return_current_grid_json_v1"),
+  source_net_id: z241.string().min(1),
+  field_type: z241.enum(["real", "complex_phasor"]),
+  min_x: z241.number().finite(),
+  min_y: z241.number().finite(),
+  columns: z241.number().int().positive().safe(),
+  rows: z241.number().int().positive().safe(),
+  cell_width: z241.number().finite().positive(),
+  cell_height: z241.number().finite().positive(),
+  copper_thickness: z241.number().finite().positive(),
+  data_format: z241.literal("simulation_return_current_grid_json_v1"),
   field_asset: simulation_return_current_field_asset
 }).superRefine((field, context) => {
   if (!Number.isSafeInteger(field.columns * field.rows)) {
     context.addIssue({
-      code: z239.ZodIssueCode.custom,
+      code: z241.ZodIssueCode.custom,
       path: ["columns"],
       message: "The grid cell count must be a safe integer"
     });
@@ -5852,16 +5901,16 @@ var simulation_pcb_return_current_field = z239.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_grid_json.ts
-import { z as z240 } from "zod";
-var channel = z240.array(z240.number().finite().nullable()).min(1);
-var simulation_return_current_grid_json = z240.discriminatedUnion("field_type", [
-  z240.object({
-    field_type: z240.literal("real"),
+import { z as z242 } from "zod";
+var channel = z242.array(z242.number().finite().nullable()).min(1);
+var simulation_return_current_grid_json = z242.discriminatedUnion("field_type", [
+  z242.object({
+    field_type: z242.literal("real"),
     sheet_current_x: channel,
     sheet_current_y: channel
   }),
-  z240.object({
-    field_type: z240.literal("complex_phasor"),
+  z242.object({
+    field_type: z242.literal("complex_phasor"),
     sheet_current_x_real: channel,
     sheet_current_x_imag: channel,
     sheet_current_y_real: channel,
@@ -5877,7 +5926,7 @@ var simulation_return_current_grid_json = z240.discriminatedUnion("field_type",
   const first = channels[0];
   if (channels.some((values) => values.length !== first.length)) {
     context.addIssue({
-      code: z240.ZodIssueCode.custom,
+      code: z242.ZodIssueCode.custom,
       message: "Current channels must have equal lengths"
     });
     return;
@@ -5886,7 +5935,7 @@ var simulation_return_current_grid_json = z240.discriminatedUnion("field_type",
     const masked = first[index] === null;
     if (channels.some((values) => values[index] === null !== masked)) {
       context.addIssue({
-        code: z240.ZodIssueCode.custom,
+        code: z242.ZodIssueCode.custom,
         message: `Cell ${index} must be null in every channel or finite in every channel`
       });
       return;
@@ -5903,7 +5952,7 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
   return simulation_return_current_grid_json.superRefine((grid, context) => {
     if (grid.field_type !== field.field_type) {
       context.addIssue({
-        code: z240.ZodIssueCode.custom,
+        code: z242.ZodIssueCode.custom,
         path: ["field_type"],
         message: "Decoded field_type must match the parent field"
       });
@@ -5911,7 +5960,7 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
     const first = grid.field_type === "real" ? grid.sheet_current_x : grid.sheet_current_x_real;
     if (first.length !== count) {
       context.addIssue({
-        code: z240.ZodIssueCode.custom,
+        code: z242.ZodIssueCode.custom,
         message: `Each current channel must have ${count} entries (columns * rows)`
       });
     }
@@ -5919,25 +5968,25 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
 }
 
 // src/simulation/simulation_pcb_return_current_heatmap.ts
-import { z as z241 } from "zod";
-var simulation_pcb_return_current_heatmap = z241.object({
-  type: z241.literal("simulation_pcb_return_current_heatmap"),
+import { z as z243 } from "zod";
+var simulation_pcb_return_current_heatmap = z243.object({
+  type: z243.literal("simulation_pcb_return_current_heatmap"),
   simulation_pcb_return_current_heatmap_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_heatmap"
   ),
-  simulation_pcb_return_current_result_id: z241.string().min(1),
+  simulation_pcb_return_current_result_id: z243.string().min(1),
   layer: layer_ref,
-  source_net_id: z241.string().min(1),
-  min_x: z241.number().finite(),
-  min_y: z241.number().finite(),
-  max_x: z241.number().finite(),
-  max_y: z241.number().finite(),
+  source_net_id: z243.string().min(1),
+  min_x: z243.number().finite(),
+  min_y: z243.number().finite(),
+  max_x: z243.number().finite(),
+  max_y: z243.number().finite(),
   image_asset: simulation_return_current_image_asset
 }).superRefine((heatmap, context) => {
   for (const axis of ["x", "y"]) {
     if (heatmap[`max_${axis}`] <= heatmap[`min_${axis}`]) {
       context.addIssue({
-        code: z241.ZodIssueCode.custom,
+        code: z243.ZodIssueCode.custom,
         path: [`max_${axis}`],
         message: "Heatmap bounds must have positive width and height"
       });
@@ -5949,14 +5998,14 @@ var simulation_pcb_return_current_heatmap = z241.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_pcb_return_current_marker.ts
-import { z as z242 } from "zod";
-var marker_base = z242.object({
-  type: z242.literal("simulation_pcb_return_current_marker"),
+import { z as z244 } from "zod";
+var marker_base = z244.object({
+  type: z244.literal("simulation_pcb_return_current_marker"),
   simulation_pcb_return_current_marker_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_marker"
   ),
-  simulation_pcb_return_current_result_id: z242.string().min(1),
-  role: z242.enum([
+  simulation_pcb_return_current_result_id: z244.string().min(1),
+  role: z244.enum([
     "signal_source",
     "signal_load",
     "return_source",
@@ -5964,33 +6013,33 @@ var marker_base = z242.object({
     "signal_transition",
     "return_transition"
   ]),
-  label: z242.string().optional(),
-  label_x: z242.number().finite().optional(),
-  label_y: z242.number().finite().optional()
+  label: z244.string().optional(),
+  label_x: z244.number().finite().optional(),
+  label_y: z244.number().finite().optional()
 });
-var simulation_pcb_return_current_marker = z242.discriminatedUnion("target_type", [
+var simulation_pcb_return_current_marker = z244.discriminatedUnion("target_type", [
   marker_base.extend({
-    target_type: z242.literal("pcb_port"),
-    pcb_port_id: z242.string().min(1),
+    target_type: z244.literal("pcb_port"),
+    pcb_port_id: z244.string().min(1),
     layer: layer_ref
   }),
   marker_base.extend({
-    target_type: z242.literal("pcb_via"),
-    pcb_via_id: z242.string().min(1),
+    target_type: z244.literal("pcb_via"),
+    pcb_via_id: z244.string().min(1),
     from_layer: layer_ref,
     to_layer: layer_ref
   })
 ]).superRefine((marker, context) => {
   if (marker.label_x === void 0 !== (marker.label_y === void 0)) {
     context.addIssue({
-      code: z242.ZodIssueCode.custom,
+      code: z244.ZodIssueCode.custom,
       path: ["label_x"],
       message: "label_x and label_y must be provided together"
     });
   }
   if (marker.target_type === "pcb_via" && marker.from_layer === marker.to_layer) {
     context.addIssue({
-      code: z242.ZodIssueCode.custom,
+      code: z244.ZodIssueCode.custom,
       path: ["to_layer"],
       message: "A via transition must connect distinct layers"
     });
@@ -6001,13 +6050,13 @@ var simulation_pcb_return_current_marker = z242.discriminatedUnion("target_type"
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z248 } from "zod";
+import { z as z250 } from "zod";
 
 // src/drawing/drawing_page.ts
-import { z as z244 } from "zod";
+import { z as z246 } from "zod";
 
 // src/drawing/drawing_page_size.ts
-import { z as z243 } from "zod";
+import { z as z245 } from "zod";
 var drawingPageSizes = {
   iso_a0: [1189, 841],
   iso_a1: [841, 594],
@@ -6020,7 +6069,7 @@ var drawingPageSizes = {
   ansi_d: [863.6, 558.8],
   ansi_e: [1117.6, 863.6]
 };
-var drawing_page_size = z243.enum([
+var drawing_page_size = z245.enum([
   "iso_a0",
   "iso_a1",
   "iso_a2",
@@ -6038,15 +6087,15 @@ function getDrawingPageDimensions(size2, orientation = "landscape") {
 }
 
 // src/drawing/drawing_page.ts
-var drawing_page = z244.object({
-  type: z244.literal("drawing_page"),
-  drawing_page_id: z244.string().min(1),
-  name: z244.string().optional(),
-  display_name: z244.string().optional(),
+var drawing_page = z246.object({
+  type: z246.literal("drawing_page"),
+  drawing_page_id: z246.string().min(1),
+  name: z246.string().optional(),
+  display_name: z246.string().optional(),
   page_size: drawing_page_size.optional(),
-  orientation: z244.enum(["landscape", "portrait"]).optional(),
-  width: z244.number().finite().positive(),
-  height: z244.number().finite().positive()
+  orientation: z246.enum(["landscape", "portrait"]).optional(),
+  width: z246.number().finite().positive(),
+  height: z246.number().finite().positive()
 }).superRefine((page, ctx) => {
   if (!page.page_size) {
     if (page.orientation)
@@ -6070,8 +6119,8 @@ var drawing_page = z244.object({
 expectTypesMatch(true);
 
 // src/drawing/drawing_part_view.ts
-import { z as z245 } from "zod";
-var drawing_part_view_direction = z245.enum([
+import { z as z247 } from "zod";
+var drawing_part_view_direction = z247.enum([
   "x_positive",
   "x_negative",
   "y_positive",
@@ -6080,26 +6129,26 @@ var drawing_part_view_direction = z245.enum([
   "z_negative",
   "isometric"
 ]);
-var drawing_section_plane = z245.object({
-  axis: z245.enum(["x", "y", "z"]),
-  offset: z245.number().finite(),
-  keep_side: z245.enum(["less", "greater"]),
-  hatch_spacing: z245.number().finite().positive().optional()
-});
-var drawing_part_view = z245.object({
-  type: z245.literal("drawing_part_view"),
-  drawing_part_view_id: z245.string().min(1),
-  drawing_page_id: z245.string().min(1),
-  source_group_id: z245.string().min(1).optional(),
-  source_component_ids: z245.array(z245.string().min(1)).optional(),
-  name: z245.string().optional(),
-  display_name: z245.string().optional(),
+var drawing_section_plane = z247.object({
+  axis: z247.enum(["x", "y", "z"]),
+  offset: z247.number().finite(),
+  keep_side: z247.enum(["less", "greater"]),
+  hatch_spacing: z247.number().finite().positive().optional()
+});
+var drawing_part_view = z247.object({
+  type: z247.literal("drawing_part_view"),
+  drawing_part_view_id: z247.string().min(1),
+  drawing_page_id: z247.string().min(1),
+  source_group_id: z247.string().min(1).optional(),
+  source_component_ids: z247.array(z247.string().min(1)).optional(),
+  name: z247.string().optional(),
+  display_name: z247.string().optional(),
   direction: drawing_part_view_direction,
-  center: z245.object({ x: z245.number().finite(), y: z245.number().finite() }),
-  width: z245.number().finite().positive(),
-  height: z245.number().finite().positive(),
-  scale: z245.number().finite().positive().optional(),
-  show_hidden_edges: z245.boolean().optional(),
+  center: z247.object({ x: z247.number().finite(), y: z247.number().finite() }),
+  width: z247.number().finite().positive(),
+  height: z247.number().finite().positive(),
+  scale: z247.number().finite().positive().optional(),
+  show_hidden_edges: z247.boolean().optional(),
   section: drawing_section_plane.optional()
 }).describe(
   "A configured orthographic view of selected assembly geometry. Paper coordinates are mm, origin at sheet center, +X right/+Y up. Directions and section planes use CAD world coordinates in mm with +Z up."
@@ -6110,20 +6159,20 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/drawing/drawing_page_title_block.ts
-import { z as z246 } from "zod";
-var drawing_page_title_block = z246.object({
-  type: z246.literal("drawing_page_title_block"),
-  drawing_page_title_block_id: z246.string().min(1),
-  drawing_page_id: z246.string().min(1),
-  title: z246.string().min(1),
-  legal_owner: z246.string().optional(),
-  identification_number: z246.string().optional(),
-  revision_index: z246.string().optional(),
-  date_of_issue: z246.string().optional(),
-  creator: z246.string().optional(),
-  approval_person: z246.string().optional(),
-  sheet_number: z246.number().int().positive().optional(),
-  number_of_sheets: z246.number().int().positive().optional()
+import { z as z248 } from "zod";
+var drawing_page_title_block = z248.object({
+  type: z248.literal("drawing_page_title_block"),
+  drawing_page_title_block_id: z248.string().min(1),
+  drawing_page_id: z248.string().min(1),
+  title: z248.string().min(1),
+  legal_owner: z248.string().optional(),
+  identification_number: z248.string().optional(),
+  revision_index: z248.string().optional(),
+  date_of_issue: z248.string().optional(),
+  creator: z248.string().optional(),
+  approval_person: z248.string().optional(),
+  sheet_number: z248.number().int().positive().optional(),
+  number_of_sheets: z248.number().int().positive().optional()
 }).refine(
   (block) => block.sheet_number == null || block.number_of_sheets == null || block.sheet_number <= block.number_of_sheets,
   {
@@ -6134,28 +6183,28 @@ var drawing_page_title_block = z246.object({
 expectTypesMatch(true);
 
 // src/drawing/drawing_dimension_line.ts
-import { z as z247 } from "zod";
-var paper_point = z247.object({
-  x: z247.number().finite(),
-  y: z247.number().finite()
-});
-var drawing_dimension_line = z247.object({
-  type: z247.literal("drawing_dimension_line"),
-  drawing_dimension_line_id: z247.string().trim().min(1),
-  drawing_part_view_id: z247.string().trim().min(1),
+import { z as z249 } from "zod";
+var paper_point = z249.object({
+  x: z249.number().finite(),
+  y: z249.number().finite()
+});
+var drawing_dimension_line = z249.object({
+  type: z249.literal("drawing_dimension_line"),
+  drawing_dimension_line_id: z249.string().trim().min(1),
+  drawing_part_view_id: z249.string().trim().min(1),
   start: paper_point,
   end: paper_point,
-  text: z247.string().refine(
+  text: z249.string().refine(
     (text) => text.trim().length > 0,
     "Dimension text must not be blank"
   ),
   edge_ref_start: paper_point.optional(),
   edge_ref_end: paper_point.optional(),
-  edge_ref_name: z247.string().refine(
+  edge_ref_name: z249.string().refine(
     (name) => name.trim().length > 0,
     "Edge reference name must not be blank"
   ).optional(),
-  name: z247.string().trim().min(1).optional()
+  name: z249.string().trim().min(1).optional()
 }).refine(
   (line) => line.start.x !== line.end.x || line.start.y !== line.end.y,
   { message: "Dimension line endpoints must be distinct", path: ["end"] }
@@ -6167,7 +6216,7 @@ expectTypesMatch(
 );
 
 // src/any_circuit_element.ts
-var any_circuit_element = z248.union([
+var any_circuit_element = z250.union([
   pcb_quote_estimate,
   drawing_page,
   drawing_page_title_block,
@@ -6339,6 +6388,8 @@ var any_circuit_element = z248.union([
   cad_cable,
   cad_reference_surface,
   cad_collision_error,
+  cad_explosion_collision_error,
+  cad_explosion_collision_check_warning,
   simulation_voltage_source,
   simulation_current_source,
   simulation_experiment,
@@ -6384,6 +6435,9 @@ export {
   cad_cable,
   cad_collision_error,
   cad_component,
+  cad_explosion_collision_check_warning,
+  cad_explosion_collision_error,
+  cad_explosion_collision_obstacle,
   cad_explosion_move,
   cad_explosion_stage,
   cad_model_axis_directions,