circuit-json 0.0.532 → 0.0.534

package/dist/index.mjs

@@ -4818,6 +4818,59 @@ var spice_simulation_options = z207.object({
   abstol: z207.union([z207.number(), z207.string()]).optional(),
   vntol: z207.union([z207.number(), z207.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
+var pcb_spice_channel = z207.object({
+  reduction: z207.union([
+    z207.literal("routed-copper"),
+    z207.literal("straightened-stages")
+  ]),
+  sections: z207.number().int().min(1).max(128),
+  lanes: z207.array(
+    z207.object({
+      name: z207.string().min(1),
+      driver_source_port_id: z207.string().min(1),
+      receiver_source_port_id: z207.string().min(1)
+    })
+  ).min(1).max(3),
+  reference_source_port_id: z207.string().min(1),
+  passive_source_component_ids: z207.array(z207.string().min(1)).optional(),
+  extraction: z207.object({
+    minimum_frequency_hz: z207.number().finite().positive(),
+    maximum_frequency_hz: z207.number().finite().positive(),
+    model_frequency_hz: z207.number().finite().positive(),
+    filaments: z207.number().int().positive(),
+    refinement_filaments: z207.number().int().positive(),
+    convergence_tolerance: z207.number().finite().positive(),
+    capacitance_tolerance: z207.number().finite().positive(),
+    reciprocity_tolerance: z207.number().finite().positive(),
+    dc_resistance_tolerance: z207.number().finite().positive(),
+    max_panel_length_mm: z207.number().finite().positive(),
+    ground_mesh_size_mm: z207.number().finite().positive().optional()
+  }).refine(
+    (extraction) => extraction.refinement_filaments > extraction.filaments,
+    {
+      path: ["refinement_filaments"],
+      message: "refinement_filaments must be greater than filaments"
+    }
+  ),
+  relative_permittivity: z207.number().finite().positive().optional(),
+  via_plating_thickness_mm: z207.number().finite().positive().optional(),
+  via_equivalent_width_mm: z207.number().finite().positive().optional(),
+  omit_through_via_stubs: z207.boolean().optional(),
+  straightened_stage_profiles: z207.record(
+    z207.object({
+      spacing_mm: z207.number().finite().positive(),
+      relative_permittivity: z207.number().finite().positive(),
+      return: z207.object({
+        width_mm: z207.number().finite().positive(),
+        thickness_mm: z207.number().finite().positive(),
+        length_factor: z207.number().finite().positive(),
+        center_y_mm: z207.number().finite(),
+        center_z_mm: z207.number().finite()
+      })
+    })
+  ).optional()
+});
+expectTypesMatch(true);
 var simulation_experiment = z207.object({
   type: z207.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
@@ -4831,6 +4884,7 @@ var simulation_experiment = z207.object({
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
+  pcb_spice_channel: pcb_spice_channel.optional(),
   dc_sweep_voltage_source_id: z207.string().optional(),
   dc_sweep_current_source_id: z207.string().optional(),
   dc_sweep_start: z207.number().optional(),
@@ -5787,7 +5841,7 @@ var simulation_pcb_return_current_marker = z238.discriminatedUnion("target_type"
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z243 } from "zod";
+import { z as z244 } from "zod";
 
 // src/drawing/drawing_page.ts
 import { z as z240 } from "zod";
@@ -5919,11 +5973,45 @@ var drawing_page_title_block = z242.object({
 );
 expectTypesMatch(true);
 
+// src/drawing/drawing_dimension_line.ts
+import { z as z243 } from "zod";
+var paper_point = z243.object({
+  x: z243.number().finite(),
+  y: z243.number().finite()
+});
+var drawing_dimension_line = z243.object({
+  type: z243.literal("drawing_dimension_line"),
+  drawing_dimension_line_id: z243.string().trim().min(1),
+  drawing_part_view_id: z243.string().trim().min(1),
+  start: paper_point,
+  end: paper_point,
+  text: z243.string().refine(
+    (text) => text.trim().length > 0,
+    "Dimension text must not be blank"
+  ),
+  edge_ref_start: paper_point.optional(),
+  edge_ref_end: paper_point.optional(),
+  edge_ref_name: z243.string().refine(
+    (name) => name.trim().length > 0,
+    "Edge reference name must not be blank"
+  ).optional(),
+  name: z243.string().trim().min(1).optional()
+}).refine(
+  (line) => line.start.x !== line.end.x || line.start.y !== line.end.y,
+  { message: "Dimension line endpoints must be distinct", path: ["end"] }
+).describe(
+  "A resolved dimension annotation associated with a drawing part view. start/end and optional edge_ref_start/edge_ref_end use page-centered paper mm, +X right/+Y up. Core resolves model measurement and formats the required text before emitting this record; renderers draw the supplied line, text and optional witness attachments without resolving native geometry or deriving values from paper length. Each witness attachment is independently optional. edge_ref_name is optional exact nonblank model-feature metadata, never a geometry definition or a rendering dependency."
+);
+expectTypesMatch(
+  true
+);
+
 // src/any_circuit_element.ts
-var any_circuit_element = z243.union([
+var any_circuit_element = z244.union([
   drawing_page,
   drawing_page_title_block,
   drawing_part_view,
+  drawing_dimension_line,
   source_runtime_error,
   source_datasheet,
   source_trace,
@@ -6141,6 +6229,7 @@ export {
   current,
   distance,
   drawingPageSizes,
+  drawing_dimension_line,
   drawing_page,
   drawing_page_size,
   drawing_page_title_block,
@@ -6270,6 +6359,7 @@ export {
   pcb_smtpad_pill,
   pcb_solder_paste,
   pcb_soldermask_opening,
+  pcb_spice_channel,
   pcb_stackup,
   pcb_stackup_copper_layer,
   pcb_stackup_dielectric_layer,