circuit-json 0.0.530 → 0.0.532

package/dist/index.mjs

@@ -3225,24 +3225,74 @@ var pcb_board = z140.object({
 }).merge(manufacturing_drc_properties).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_bend.ts
+// src/pcb/pcb_stackup.ts
 import { z as z141 } from "zod";
+var positive_length = length.pipe(z141.number().finite().positive());
+var nonnegative_length = length.pipe(z141.number().finite().nonnegative());
+var positive_number = z141.number().finite().positive();
+var nonnegative_number = z141.number().finite().nonnegative();
+var pcb_stackup_soldermask_layer = z141.object({
+  layer_type: z141.literal("soldermask").describe("Soldermask layer"),
+  thickness: positive_length.optional().describe("Soldermask thickness in mm, omitted when unknown"),
+  relative_permittivity: positive_number.optional().describe("Soldermask relative permittivity")
+});
+expectTypesMatch(true);
+var pcb_stackup_copper_layer = z141.object({
+  layer_type: z141.literal("copper").describe("Copper layer"),
+  layer: layer_ref.describe("PCB copper layer, such as top, inner1 or bottom"),
+  thickness: positive_length.describe("Copper thickness in mm"),
+  electrical_conductivity_s_per_m: positive_number.optional().describe(
+    "Electrical conductivity in S/m, consumers may assume 5.8e7 (annealed copper) when omitted"
+  ),
+  rms_surface_roughness: nonnegative_length.optional().describe("RMS copper surface roughness in mm")
+});
+expectTypesMatch(true);
+var pcb_stackup_dielectric_layer = z141.object({
+  layer_type: z141.literal("dielectric").describe("Dielectric layer"),
+  dielectric_type: z141.enum(["core", "prepreg"]).optional().describe("Core or prepreg construction"),
+  material_name: z141.string().optional().describe("Fabricator material name, such as FR-4 or 7628"),
+  thickness: positive_length.describe("Dielectric thickness in mm"),
+  relative_permittivity: positive_number.optional().describe("Dielectric relative permittivity, Dk"),
+  loss_tangent: nonnegative_number.optional().describe("Dielectric loss tangent, Df"),
+  dielectric_properties_frequency_hz: positive_number.optional().describe(
+    "Frequency in Hz at which relative_permittivity and loss_tangent were measured"
+  )
+});
+expectTypesMatch(true);
+var pcb_stackup_layer = z141.discriminatedUnion("layer_type", [
+  pcb_stackup_soldermask_layer,
+  pcb_stackup_copper_layer,
+  pcb_stackup_dielectric_layer
+]);
+expectTypesMatch(true);
+var pcb_stackup = z141.object({
+  type: z141.literal("pcb_stackup"),
+  pcb_stackup_id: getZodPrefixedIdWithDefault("pcb_stackup"),
+  pcb_board_id: z141.string().describe("Board described by this stackup"),
+  subcircuit_id: z141.string().optional(),
+  plated_hole_copper_thickness: positive_length.optional().describe("Copper thickness of plated hole and via barrel walls in mm"),
+  layers: z141.array(pcb_stackup_layer).min(1).describe("Physical layers ordered from top to bottom")
+}).describe("Physical layer construction and material data for a PCB board");
+expectTypesMatch(true);
+
+// src/pcb/pcb_bend.ts
+import { z as z142 } from "zod";
 var finite_point = point.extend({
-  x: length.pipe(z141.number().finite()),
-  y: length.pipe(z141.number().finite())
+  x: length.pipe(z142.number().finite()),
+  y: length.pipe(z142.number().finite())
 });
-var pcb_bend = z141.object({
-  type: z141.literal("pcb_bend"),
+var pcb_bend = z142.object({
+  type: z142.literal("pcb_bend"),
   pcb_bend_id: getZodPrefixedIdWithDefault("pcb_bend"),
-  pcb_board_id: z141.string(),
-  pcb_group_id: z141.string().optional(),
-  subcircuit_id: z141.string().optional(),
-  name: z141.string().optional(),
+  pcb_board_id: z142.string(),
+  pcb_group_id: z142.string().optional(),
+  subcircuit_id: z142.string().optional(),
+  name: z142.string().optional(),
   start: finite_point,
   end: finite_point,
-  bend_angle: rotation.pipe(z141.number().finite()),
-  bend_radius: length.pipe(z141.number().finite().positive()),
-  bend_side: z141.enum(["left", "right"])
+  bend_angle: rotation.pipe(z142.number().finite()),
+  bend_radius: length.pipe(z142.number().finite().positive()),
+  bend_side: z142.enum(["left", "right"])
 }).refine(({ start, end }) => start.x !== end.x || start.y !== end.y, {
   message: "Bend centerline endpoints must be distinct",
   path: ["end"]
@@ -3252,123 +3302,123 @@ var pcb_bend = z141.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_stiffener.ts
-import { z as z142 } from "zod";
-var positive_length = length.pipe(z142.number().finite().positive());
+import { z as z143 } from "zod";
+var positive_length2 = length.pipe(z143.number().finite().positive());
 var finite_point2 = point.extend({
-  x: length.pipe(z142.number().finite()),
-  y: length.pipe(z142.number().finite())
+  x: length.pipe(z143.number().finite()),
+  y: length.pipe(z143.number().finite())
 });
-var pcb_stiffener_base = z142.object({
-  type: z142.literal("pcb_stiffener"),
+var pcb_stiffener_base = z143.object({
+  type: z143.literal("pcb_stiffener"),
   pcb_stiffener_id: getZodPrefixedIdWithDefault("pcb_stiffener"),
-  pcb_board_id: z142.string(),
-  pcb_group_id: z142.string().optional(),
-  subcircuit_id: z142.string().optional(),
-  name: z142.string().optional(),
-  layer: z142.enum(["top", "bottom"]),
-  material: z142.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
-  thickness: positive_length,
-  adhesive_thickness: length.pipe(z142.number().finite().nonnegative()).optional()
+  pcb_board_id: z143.string(),
+  pcb_group_id: z143.string().optional(),
+  subcircuit_id: z143.string().optional(),
+  name: z143.string().optional(),
+  layer: z143.enum(["top", "bottom"]),
+  material: z143.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
+  thickness: positive_length2,
+  adhesive_thickness: length.pipe(z143.number().finite().nonnegative()).optional()
 });
 var pcb_stiffener_rect = pcb_stiffener_base.extend({
-  shape: z142.literal("rect"),
+  shape: z143.literal("rect"),
   center: finite_point2,
-  rotation: rotation.pipe(z142.number().finite()).optional(),
-  width: positive_length,
-  height: positive_length,
-  outline: z142.never().optional()
+  rotation: rotation.pipe(z143.number().finite()).optional(),
+  width: positive_length2,
+  height: positive_length2,
+  outline: z143.never().optional()
 });
 expectTypesMatch(true);
 var pcb_stiffener_polygon = pcb_stiffener_base.extend({
-  shape: z142.literal("polygon"),
-  outline: z142.array(finite_point2).min(3).refine((points) => {
+  shape: z143.literal("polygon"),
+  outline: z143.array(finite_point2).min(3).refine((points) => {
     const twice_area = points.reduce((sum, p, i) => {
       const next = points[(i + 1) % points.length];
       return sum + p.x * next.y - next.x * p.y;
     }, 0);
     return Number.isFinite(twice_area) && twice_area !== 0;
   }, "Stiffener outline must enclose a nonzero area"),
-  center: z142.never().optional(),
-  rotation: z142.never().optional(),
-  width: z142.never().optional(),
-  height: z142.never().optional()
+  center: z143.never().optional(),
+  rotation: z143.never().optional(),
+  width: z143.never().optional(),
+  height: z143.never().optional()
 });
 expectTypesMatch(
   true
 );
-var pcb_stiffener = z142.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
+var pcb_stiffener = z143.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
   "Defines bonded mechanical PCB reinforcement without adding copper layers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z143 } from "zod";
-var pcb_panel = z143.object({
-  type: z143.literal("pcb_panel"),
+import { z as z144 } from "zod";
+var pcb_panel = z144.object({
+  type: z144.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  covered_with_solder_mask: z143.boolean().optional().default(true)
+  covered_with_solder_mask: z144.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z144 } from "zod";
+import { z as z145 } from "zod";
 var pcb_placement_error = base_circuit_json_error.extend({
-  type: z144.literal("pcb_placement_error"),
+  type: z145.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z144.literal("pcb_placement_error").default("pcb_placement_error"),
-  subcircuit_id: z144.string().optional()
+  error_type: z145.literal("pcb_placement_error").default("pcb_placement_error"),
+  subcircuit_id: z145.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_packing_error.ts
-import { z as z145 } from "zod";
+import { z as z146 } from "zod";
 var pcb_packing_error = base_circuit_json_error.extend({
-  type: z145.literal("pcb_packing_error"),
+  type: z146.literal("pcb_packing_error"),
   pcb_packing_error_id: getZodPrefixedIdWithDefault("pcb_packing_error"),
-  error_type: z145.literal("pcb_packing_error").default("pcb_packing_error"),
-  pcb_group_id: z145.string().optional(),
-  subcircuit_id: z145.string().optional()
+  error_type: z146.literal("pcb_packing_error").default("pcb_packing_error"),
+  pcb_group_id: z146.string().optional(),
+  subcircuit_id: z146.string().optional()
 }).describe("Defines a failure to pack PCB components within layout bounds");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panelization_placement_error.ts
-import { z as z146 } from "zod";
+import { z as z147 } from "zod";
 var pcb_panelization_placement_error = base_circuit_json_error.extend({
-  type: z146.literal("pcb_panelization_placement_error"),
+  type: z147.literal("pcb_panelization_placement_error"),
   pcb_panelization_placement_error_id: getZodPrefixedIdWithDefault(
     "pcb_panelization_placement_error"
   ),
-  error_type: z146.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
-  pcb_panel_id: z146.string().optional(),
-  pcb_board_id: z146.string().optional(),
-  subcircuit_id: z146.string().optional()
+  error_type: z147.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
+  pcb_panel_id: z147.string().optional(),
+  pcb_board_id: z147.string().optional(),
+  subcircuit_id: z147.string().optional()
 }).describe("Defines a panelization placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z147 } from "zod";
-var pcb_trace_hint = z147.object({
-  type: z147.literal("pcb_trace_hint"),
+import { z as z148 } from "zod";
+var pcb_trace_hint = z148.object({
+  type: z148.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z147.string(),
-  pcb_component_id: z147.string(),
-  route: z147.array(route_hint_point),
-  subcircuit_id: z147.string().optional()
+  pcb_port_id: z148.string(),
+  pcb_component_id: z148.string(),
+  route: z148.array(route_hint_point),
+  subcircuit_id: z148.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z148 } from "zod";
-var pcb_silkscreen_line = z148.object({
-  type: z148.literal("pcb_silkscreen_line"),
+import { z as z149 } from "zod";
+var pcb_silkscreen_line = z149.object({
+  type: z149.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z148.string(),
-  pcb_group_id: z148.string().optional(),
-  subcircuit_id: z148.string().optional(),
+  pcb_component_id: z149.string(),
+  pcb_group_id: z149.string().optional(),
+  subcircuit_id: z149.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -3379,32 +3429,32 @@ var pcb_silkscreen_line = z148.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z149 } from "zod";
-var pcb_silkscreen_path = z149.object({
-  type: z149.literal("pcb_silkscreen_path"),
+import { z as z150 } from "zod";
+var pcb_silkscreen_path = z150.object({
+  type: z150.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z149.string(),
-  pcb_group_id: z149.string().optional(),
-  subcircuit_id: z149.string().optional(),
+  pcb_component_id: z150.string(),
+  pcb_group_id: z150.string().optional(),
+  subcircuit_id: z150.string().optional(),
   layer: visible_layer,
-  route: z149.array(point),
+  route: z150.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z150 } from "zod";
-var pcb_silkscreen_text = z150.object({
-  type: z150.literal("pcb_silkscreen_text"),
+import { z as z151 } from "zod";
+var pcb_silkscreen_text = z151.object({
+  type: z151.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z150.string().optional(),
-  subcircuit_id: z150.string().optional(),
-  font: z150.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z151.string().optional(),
+  subcircuit_id: z151.string().optional(),
+  font: z151.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z150.string(),
-  text: z150.string(),
-  is_knockout: z150.boolean().default(false).optional(),
-  knockout_padding: z150.object({
+  pcb_component_id: z151.string(),
+  text: z151.string(),
+  is_knockout: z151.boolean().default(false).optional(),
+  knockout_padding: z151.object({
     left: length,
     top: length,
     bottom: length,
@@ -3415,27 +3465,27 @@ var pcb_silkscreen_text = z150.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z150.number().optional(),
+  ccw_rotation: z151.number().optional(),
   layer: layer_ref,
-  is_mirrored: z150.boolean().default(false).optional(),
+  is_mirrored: z151.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z151 } from "zod";
-var pcb_copper_text = z151.object({
-  type: z151.literal("pcb_copper_text"),
+import { z as z152 } from "zod";
+var pcb_copper_text = z152.object({
+  type: z152.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z151.string().optional(),
-  subcircuit_id: z151.string().optional(),
-  font: z151.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z152.string().optional(),
+  subcircuit_id: z152.string().optional(),
+  font: z152.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z151.string(),
-  text: z151.string(),
-  is_knockout: z151.boolean().default(false).optional(),
-  knockout_padding: z151.object({
+  pcb_component_id: z152.string(),
+  text: z152.string(),
+  is_knockout: z152.boolean().default(false).optional(),
+  knockout_padding: z152.object({
     left: length,
     top: length,
     bottom: length,
@@ -3446,61 +3496,61 @@ var pcb_copper_text = z151.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z151.number().optional(),
+  ccw_rotation: z152.number().optional(),
   layer: layer_ref,
-  is_mirrored: z151.boolean().default(false).optional(),
+  is_mirrored: z152.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z152 } from "zod";
-var pcb_silkscreen_rect = z152.object({
-  type: z152.literal("pcb_silkscreen_rect"),
+import { z as z153 } from "zod";
+var pcb_silkscreen_rect = z153.object({
+  type: z153.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z152.string(),
-  pcb_group_id: z152.string().optional(),
-  subcircuit_id: z152.string().optional(),
+  pcb_component_id: z153.string(),
+  pcb_group_id: z153.string().optional(),
+  subcircuit_id: z153.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z152.boolean().default(true).optional(),
-  has_stroke: z152.boolean().optional(),
-  is_stroke_dashed: z152.boolean().optional(),
-  ccw_rotation: z152.number().optional()
+  is_filled: z153.boolean().default(true).optional(),
+  has_stroke: z153.boolean().optional(),
+  is_stroke_dashed: z153.boolean().optional(),
+  ccw_rotation: z153.number().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z153 } from "zod";
-var pcb_silkscreen_circle = z153.object({
-  type: z153.literal("pcb_silkscreen_circle"),
+import { z as z154 } from "zod";
+var pcb_silkscreen_circle = z154.object({
+  type: z154.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z153.string(),
-  pcb_group_id: z153.string().optional(),
-  subcircuit_id: z153.string().optional(),
+  pcb_component_id: z154.string(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm"),
-  is_filled: z153.boolean().optional()
+  is_filled: z154.boolean().optional()
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z154 } from "zod";
-var pcb_silkscreen_oval = z154.object({
-  type: z154.literal("pcb_silkscreen_oval"),
+import { z as z155 } from "zod";
+var pcb_silkscreen_oval = z155.object({
+  type: z155.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z154.string(),
-  pcb_group_id: z154.string().optional(),
-  subcircuit_id: z154.string().optional(),
+  pcb_component_id: z155.string(),
+  pcb_group_id: z155.string().optional(),
+  subcircuit_id: z155.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -3510,267 +3560,267 @@ var pcb_silkscreen_oval = z154.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_graphic.ts
-import { z as z155 } from "zod";
-var pcb_silkscreen_graphic_base = z155.object({
-  type: z155.literal("pcb_silkscreen_graphic"),
+import { z as z156 } from "zod";
+var pcb_silkscreen_graphic_base = z156.object({
+  type: z156.literal("pcb_silkscreen_graphic"),
   pcb_silkscreen_graphic_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_graphic"
   ),
-  pcb_component_id: z155.string(),
-  pcb_group_id: z155.string().optional(),
-  subcircuit_id: z155.string().optional(),
+  pcb_component_id: z156.string(),
+  pcb_group_id: z156.string().optional(),
+  subcircuit_id: z156.string().optional(),
   layer: visible_layer,
   image_asset: asset.optional()
 });
 var pcb_silkscreen_graphic_brep = pcb_silkscreen_graphic_base.extend({
-  shape: z155.literal("brep"),
+  shape: z156.literal("brep"),
   brep_shape
 }).describe("Defines a BRep silkscreen graphic on the PCB");
 expectTypesMatch(
   true
 );
-var pcb_silkscreen_graphic = z155.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
+var pcb_silkscreen_graphic = z156.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z156 } from "zod";
-var pcb_silkscreen_pill = z156.object({
-  type: z156.literal("pcb_silkscreen_pill"),
+import { z as z157 } from "zod";
+var pcb_silkscreen_pill = z157.object({
+  type: z157.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z156.string(),
-  pcb_group_id: z156.string().optional(),
-  subcircuit_id: z156.string().optional(),
+  pcb_component_id: z157.string(),
+  pcb_group_id: z157.string().optional(),
+  subcircuit_id: z157.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
-  ccw_rotation: z156.number().optional()
+  ccw_rotation: z157.number().optional()
 }).describe("Defines a silkscreen pill on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z157 } from "zod";
-var pcb_fabrication_note_text = z157.object({
-  type: z157.literal("pcb_fabrication_note_text"),
+import { z as z158 } from "zod";
+var pcb_fabrication_note_text = z158.object({
+  type: z158.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z157.string().optional(),
-  pcb_group_id: z157.string().optional(),
-  font: z157.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z158.string().optional(),
+  pcb_group_id: z158.string().optional(),
+  font: z158.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z157.string(),
-  text: z157.string(),
-  ccw_rotation: z157.number().optional(),
+  pcb_component_id: z158.string(),
+  text: z158.string(),
+  ccw_rotation: z158.number().optional(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z157.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z157.string().optional()
+  anchor_alignment: z158.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z158.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z158 } from "zod";
-var pcb_fabrication_note_path = z158.object({
-  type: z158.literal("pcb_fabrication_note_path"),
+import { z as z159 } from "zod";
+var pcb_fabrication_note_path = z159.object({
+  type: z159.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z158.string(),
-  subcircuit_id: z158.string().optional(),
+  pcb_component_id: z159.string(),
+  subcircuit_id: z159.string().optional(),
   layer: layer_ref,
-  route: z158.array(point),
+  route: z159.array(point),
   stroke_width: length,
-  color: z158.string().optional(),
-  is_filled: z158.boolean().optional(),
-  has_stroke: z158.boolean().optional()
+  color: z159.string().optional(),
+  is_filled: z159.boolean().optional(),
+  has_stroke: z159.boolean().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z159 } from "zod";
-var pcb_fabrication_note_rect = z159.object({
-  type: z159.literal("pcb_fabrication_note_rect"),
+import { z as z160 } from "zod";
+var pcb_fabrication_note_rect = z160.object({
+  type: z160.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z159.string(),
-  pcb_group_id: z159.string().optional(),
-  subcircuit_id: z159.string().optional(),
+  pcb_component_id: z160.string(),
+  pcb_group_id: z160.string().optional(),
+  subcircuit_id: z160.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z159.boolean().optional(),
-  has_stroke: z159.boolean().optional(),
-  is_stroke_dashed: z159.boolean().optional(),
-  color: z159.string().optional()
+  is_filled: z160.boolean().optional(),
+  has_stroke: z160.boolean().optional(),
+  is_stroke_dashed: z160.boolean().optional(),
+  color: z160.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z160 } from "zod";
-var pcb_fabrication_note_dimension = z160.object({
-  type: z160.literal("pcb_fabrication_note_dimension"),
+import { z as z161 } from "zod";
+var pcb_fabrication_note_dimension = z161.object({
+  type: z161.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z160.string(),
-  pcb_group_id: z160.string().optional(),
-  subcircuit_id: z160.string().optional(),
+  pcb_component_id: z161.string(),
+  pcb_group_id: z161.string().optional(),
+  subcircuit_id: z161.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z160.string().optional(),
-  text_ccw_rotation: z160.number().optional(),
+  text: z161.string().optional(),
+  text_ccw_rotation: z161.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z160.object({
-    x: z160.number(),
-    y: z160.number()
+  offset_direction: z161.object({
+    x: z161.number(),
+    y: z161.number()
   }).optional(),
-  font: z160.literal("tscircuit2024").default("tscircuit2024"),
+  font: z161.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z160.string().optional(),
+  color: z161.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z161 } from "zod";
-var pcb_note_text = z161.object({
-  type: z161.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z161.string().optional(),
-  pcb_group_id: z161.string().optional(),
-  subcircuit_id: z161.string().optional(),
-  name: z161.string().optional(),
-  font: z161.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z161.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z161.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  layer: visible_layer.default("top"),
-  is_mirrored_from_top_view: z161.boolean().optional(),
-  color: z161.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-
-// src/pcb/pcb_note_rect.ts
 import { z as z162 } from "zod";
-var pcb_note_rect = z162.object({
-  type: z162.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
+var pcb_note_text = z162.object({
+  type: z162.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
   pcb_component_id: z162.string().optional(),
   pcb_group_id: z162.string().optional(),
   subcircuit_id: z162.string().optional(),
   name: z162.string().optional(),
+  font: z162.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z162.string().optional(),
-  center: point,
-  width: length,
-  height: length,
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z162.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   layer: visible_layer.default("top"),
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z162.boolean().optional(),
-  has_stroke: z162.boolean().optional(),
-  is_stroke_dashed: z162.boolean().optional(),
+  is_mirrored_from_top_view: z162.boolean().optional(),
   color: z162.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_path.ts
+// src/pcb/pcb_note_rect.ts
 import { z as z163 } from "zod";
-var pcb_note_path = z163.object({
-  type: z163.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z163.object({
+  type: z163.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z163.string().optional(),
   pcb_group_id: z163.string().optional(),
   subcircuit_id: z163.string().optional(),
   name: z163.string().optional(),
   text: z163.string().optional(),
-  route: z163.array(point),
+  center: point,
+  width: length,
+  height: length,
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z163.boolean().optional(),
+  has_stroke: z163.boolean().optional(),
+  is_stroke_dashed: z163.boolean().optional(),
   color: z163.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_line.ts
+// src/pcb/pcb_note_path.ts
 import { z as z164 } from "zod";
-var pcb_note_line = z164.object({
-  type: z164.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z164.object({
+  type: z164.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z164.string().optional(),
   pcb_group_id: z164.string().optional(),
   subcircuit_id: z164.string().optional(),
   name: z164.string().optional(),
   text: z164.string().optional(),
+  route: z164.array(point),
+  layer: visible_layer.default("top"),
+  stroke_width: length.default("0.1mm"),
+  color: z164.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_line.ts
+import { z as z165 } from "zod";
+var pcb_note_line = z165.object({
+  type: z165.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z165.string().optional(),
+  pcb_group_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional(),
+  name: z165.string().optional(),
+  text: z165.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   layer: visible_layer.default("top"),
   stroke_width: distance.default("0.1mm"),
-  color: z164.string().optional(),
-  is_dashed: z164.boolean().optional()
+  color: z165.string().optional(),
+  is_dashed: z165.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z165 } from "zod";
-var pcb_note_dimension = z165.object({
-  type: z165.literal("pcb_note_dimension"),
+import { z as z166 } from "zod";
+var pcb_note_dimension = z166.object({
+  type: z166.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z165.string().optional(),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
-  name: z165.string().optional(),
+  pcb_component_id: z166.string().optional(),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
+  name: z166.string().optional(),
   from: point,
   to: point,
-  text: z165.string().optional(),
-  text_ccw_rotation: z165.number().optional(),
+  text: z166.string().optional(),
+  text_ccw_rotation: z166.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z165.object({
-    x: z165.number(),
-    y: z165.number()
+  offset_direction: z166.object({
+    x: z166.number(),
+    y: z166.number()
   }).optional(),
-  font: z165.literal("tscircuit2024").default("tscircuit2024"),
+  font: z166.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
   layer: visible_layer.default("top"),
-  color: z165.string().optional(),
+  color: z166.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z166 } from "zod";
+import { z as z167 } from "zod";
 var pcb_footprint_overlap_error = base_circuit_json_error.extend({
-  type: z166.literal("pcb_footprint_overlap_error"),
+  type: z167.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z166.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  pcb_smtpad_ids: z166.array(z166.string()).optional(),
-  pcb_plated_hole_ids: z166.array(z166.string()).optional(),
-  pcb_hole_ids: z166.array(z166.string()).optional(),
-  pcb_keepout_ids: z166.array(z166.string()).optional()
+  error_type: z167.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  pcb_smtpad_ids: z167.array(z167.string()).optional(),
+  pcb_plated_hole_ids: z167.array(z167.string()).optional(),
+  pcb_hole_ids: z167.array(z167.string()).optional(),
+  pcb_keepout_ids: z167.array(z167.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_courtyard_overlap_error.ts
-import { z as z167 } from "zod";
+import { z as z168 } from "zod";
 var pcb_courtyard_overlap_error = base_circuit_json_error.extend({
-  type: z167.literal("pcb_courtyard_overlap_error"),
+  type: z168.literal("pcb_courtyard_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z167.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
-  pcb_component_ids: z167.tuple([z167.string(), z167.string()])
+  error_type: z168.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
+  pcb_component_ids: z168.tuple([z168.string(), z168.string()])
 }).describe(
   "Error emitted when the courtyard (CrtYd) of one PCB component overlaps with the courtyard of another"
 );
@@ -3779,81 +3829,81 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z168 } from "zod";
-var pcb_keepout_outline = z168.object({
-  type: z168.literal("pcb_keepout"),
-  shape: z168.literal("outline"),
-  pcb_component_id: z168.string().optional(),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional(),
-  outline: z168.array(point).min(2),
+import { z as z169 } from "zod";
+var pcb_keepout_outline = z169.object({
+  type: z169.literal("pcb_keepout"),
+  shape: z169.literal("outline"),
+  pcb_component_id: z169.string().optional(),
+  pcb_group_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional(),
+  outline: z169.array(point).min(2),
   stroke_width: length,
-  pcb_keepout_id: z168.string(),
-  layers: z168.array(z168.string()),
-  description: z168.string().optional(),
-  excluded_pcb_component_ids: z168.array(z168.string()).optional(),
-  warning_only: z168.boolean().optional(),
-  allow_traces: z168.boolean().optional(),
-  allow_placements: z168.boolean().optional()
-});
-var pcb_keepout = z168.object({
-  type: z168.literal("pcb_keepout"),
-  shape: z168.literal("rect"),
-  pcb_component_id: z168.string().optional(),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional(),
+  pcb_keepout_id: z169.string(),
+  layers: z169.array(z169.string()),
+  description: z169.string().optional(),
+  excluded_pcb_component_ids: z169.array(z169.string()).optional(),
+  warning_only: z169.boolean().optional(),
+  allow_traces: z169.boolean().optional(),
+  allow_placements: z169.boolean().optional()
+});
+var pcb_keepout = z169.object({
+  type: z169.literal("pcb_keepout"),
+  shape: z169.literal("rect"),
+  pcb_component_id: z169.string().optional(),
+  pcb_group_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z168.string(),
-  layers: z168.array(z168.string()),
+  pcb_keepout_id: z169.string(),
+  layers: z169.array(z169.string()),
   // Specify layers where the keepout applies
-  description: z168.string().optional(),
+  description: z169.string().optional(),
   // Optional description of the keepout
-  excluded_pcb_component_ids: z168.array(z168.string()).optional(),
-  warning_only: z168.boolean().optional(),
-  allow_traces: z168.boolean().optional(),
-  allow_placements: z168.boolean().optional()
+  excluded_pcb_component_ids: z169.array(z169.string()).optional(),
+  warning_only: z169.boolean().optional(),
+  allow_traces: z169.boolean().optional(),
+  allow_placements: z169.boolean().optional()
 }).or(
-  z168.object({
-    type: z168.literal("pcb_keepout"),
-    shape: z168.literal("circle"),
-    pcb_component_id: z168.string().optional(),
-    pcb_group_id: z168.string().optional(),
-    subcircuit_id: z168.string().optional(),
+  z169.object({
+    type: z169.literal("pcb_keepout"),
+    shape: z169.literal("circle"),
+    pcb_component_id: z169.string().optional(),
+    pcb_group_id: z169.string().optional(),
+    subcircuit_id: z169.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z168.string(),
-    layers: z168.array(z168.string()),
+    pcb_keepout_id: z169.string(),
+    layers: z169.array(z169.string()),
     // Specify layers where the keepout applies
-    description: z168.string().optional(),
+    description: z169.string().optional(),
     // Optional description of the keepout
-    excluded_pcb_component_ids: z168.array(z168.string()).optional(),
-    warning_only: z168.boolean().optional(),
-    allow_traces: z168.boolean().optional(),
-    allow_placements: z168.boolean().optional()
+    excluded_pcb_component_ids: z169.array(z169.string()).optional(),
+    warning_only: z169.boolean().optional(),
+    allow_traces: z169.boolean().optional(),
+    allow_placements: z169.boolean().optional()
   })
 ).or(pcb_keepout_outline);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_keepout_overlap_warning.ts
-import { z as z169 } from "zod";
-var pcb_keepout_overlap_warning = z169.object({
-  type: z169.literal("pcb_keepout_overlap_warning"),
+import { z as z170 } from "zod";
+var pcb_keepout_overlap_warning = z170.object({
+  type: z170.literal("pcb_keepout_overlap_warning"),
   pcb_keepout_overlap_warning_id: getZodPrefixedIdWithDefault(
     "pcb_keepout_overlap_warning"
   ),
-  warning_type: z169.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
-  message: z169.string(),
-  pcb_keepout_id: z169.string(),
-  pcb_component_ids: z169.array(z169.string()).optional(),
-  pcb_trace_ids: z169.array(z169.string()).optional(),
-  pcb_smtpad_ids: z169.array(z169.string()).optional(),
-  pcb_plated_hole_ids: z169.array(z169.string()).optional(),
-  pcb_via_ids: z169.array(z169.string()).optional(),
+  warning_type: z170.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
+  message: z170.string(),
+  pcb_keepout_id: z170.string(),
+  pcb_component_ids: z170.array(z170.string()).optional(),
+  pcb_trace_ids: z170.array(z170.string()).optional(),
+  pcb_smtpad_ids: z170.array(z170.string()).optional(),
+  pcb_plated_hole_ids: z170.array(z170.string()).optional(),
+  pcb_via_ids: z170.array(z170.string()).optional(),
   center: point.optional(),
-  subcircuit_id: z169.string().optional()
+  subcircuit_id: z170.string().optional()
 }).describe(
   "Warning emitted when copper overlaps a PCB keepout with warning_only enabled"
 );
@@ -3862,18 +3912,18 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_cutout.ts
-import { z as z170 } from "zod";
-var pcb_cutout_base = z170.object({
-  type: z170.literal("pcb_cutout"),
+import { z as z171 } from "zod";
+var pcb_cutout_base = z171.object({
+  type: z171.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_component_id: z170.string().optional(),
-  pcb_group_id: z170.string().optional(),
-  subcircuit_id: z170.string().optional(),
-  pcb_board_id: z170.string().optional(),
-  pcb_panel_id: z170.string().optional()
+  pcb_component_id: z171.string().optional(),
+  pcb_group_id: z171.string().optional(),
+  subcircuit_id: z171.string().optional(),
+  pcb_board_id: z171.string().optional(),
+  pcb_panel_id: z171.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z170.literal("rect"),
+  shape: z171.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3882,26 +3932,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z170.literal("circle"),
+  shape: z171.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z170.literal("polygon"),
-  points: z170.array(point)
+  shape: z171.literal("polygon"),
+  points: z171.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z170.literal("path"),
-  route: z170.array(point),
+  shape: z171.literal("path"),
+  route: z171.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z170.discriminatedUnion("shape", [
+var pcb_cutout = z171.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3910,223 +3960,223 @@ var pcb_cutout = z170.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z171 } from "zod";
+import { z as z172 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z171.literal("pcb_missing_footprint_error"),
+  type: z172.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z171.string().optional(),
-  subcircuit_id: z171.string().optional(),
-  error_type: z171.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z171.string()
+  pcb_group_id: z172.string().optional(),
+  subcircuit_id: z172.string().optional(),
+  error_type: z172.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z172.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z172 } from "zod";
+import { z as z173 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z172.literal("external_footprint_load_error"),
+  type: z173.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z172.string(),
-  source_component_id: z172.string(),
-  pcb_group_id: z172.string().optional(),
-  subcircuit_id: z172.string().optional(),
-  footprinter_string: z172.string().optional(),
-  error_type: z172.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z173.string(),
+  source_component_id: z173.string(),
+  pcb_group_id: z173.string().optional(),
+  subcircuit_id: z173.string().optional(),
+  footprinter_string: z173.string().optional(),
+  error_type: z173.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z173 } from "zod";
+import { z as z174 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z173.literal("circuit_json_footprint_load_error"),
+  type: z174.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z173.string(),
-  source_component_id: z173.string(),
-  pcb_group_id: z173.string().optional(),
-  subcircuit_id: z173.string().optional(),
-  error_type: z173.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z173.array(z173.any()).optional()
+  pcb_component_id: z174.string(),
+  source_component_id: z174.string(),
+  pcb_group_id: z174.string().optional(),
+  subcircuit_id: z174.string().optional(),
+  error_type: z174.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z174.array(z174.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z174 } from "zod";
-var pcb_group = z174.object({
-  type: z174.literal("pcb_group"),
+import { z as z175 } from "zod";
+var pcb_group = z175.object({
+  type: z175.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z174.string(),
-  is_subcircuit: z174.boolean().optional(),
-  subcircuit_id: z174.string().optional(),
+  source_group_id: z175.string(),
+  is_subcircuit: z175.boolean().optional(),
+  subcircuit_id: z175.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z174.string().optional().describe(
+  display_offset_x: z175.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z174.string().optional().describe(
+  display_offset_y: z175.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z174.array(point).optional(),
+  outline: z175.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z174.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z174.string().optional(),
-  positioned_relative_to_pcb_board_id: z174.string().optional(),
-  pcb_component_ids: z174.array(z174.string()),
-  child_layout_mode: z174.enum(["packed", "none"]).optional(),
-  name: z174.string().optional(),
-  description: z174.string().optional(),
-  layout_mode: z174.string().optional(),
-  autorouter_configuration: z174.object({
+  position_mode: z175.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z175.string().optional(),
+  positioned_relative_to_pcb_board_id: z175.string().optional(),
+  pcb_component_ids: z175.array(z175.string()),
+  child_layout_mode: z175.enum(["packed", "none"]).optional(),
+  name: z175.string().optional(),
+  description: z175.string().optional(),
+  layout_mode: z175.string().optional(),
+  autorouter_configuration: z175.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z174.string().optional()
+  autorouter_used_string: z175.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z175 } from "zod";
+import { z as z176 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z175.literal("pcb_autorouting_error"),
+  type: z176.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z175.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z175.string().optional()
+  error_type: z176.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z176.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_preflight_routing_error.ts
-import { z as z176 } from "zod";
+import { z as z177 } from "zod";
 var pcb_preflight_routing_error = base_circuit_json_error.extend({
-  type: z176.literal("pcb_preflight_routing_error"),
+  type: z177.literal("pcb_preflight_routing_error"),
   pcb_preflight_routing_error_id: getZodPrefixedIdWithDefault(
     "pcb_preflight_routing_error"
   ),
-  error_type: z176.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
-  error_code: z176.string(),
-  subcircuit_id: z176.string().optional(),
-  pcb_group_id: z176.string().optional(),
-  routing_phase_index: z176.number().int().optional(),
-  phase_name: z176.string().optional(),
-  source_trace_ids: z176.array(z176.string()).optional(),
-  pcb_component_ids: z176.array(z176.string()).optional(),
-  pcb_port_ids: z176.array(z176.string()).optional(),
-  related_error_ids: z176.array(z176.string()).optional(),
-  measurements: z176.record(z176.number().finite()).optional()
+  error_type: z177.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
+  error_code: z177.string(),
+  subcircuit_id: z177.string().optional(),
+  pcb_group_id: z177.string().optional(),
+  routing_phase_index: z177.number().int().optional(),
+  phase_name: z177.string().optional(),
+  source_trace_ids: z177.array(z177.string()).optional(),
+  pcb_component_ids: z177.array(z177.string()).optional(),
+  pcb_port_ids: z177.array(z177.string()).optional(),
+  related_error_ids: z177.array(z177.string()).optional(),
+  measurements: z177.record(z177.number().finite()).optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z177 } from "zod";
-var pcb_manual_edit_conflict_warning = z177.object({
-  type: z177.literal("pcb_manual_edit_conflict_warning"),
+import { z as z178 } from "zod";
+var pcb_manual_edit_conflict_warning = z178.object({
+  type: z178.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z177.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z177.string(),
-  pcb_component_id: z177.string(),
-  pcb_group_id: z177.string().optional(),
-  subcircuit_id: z177.string().optional(),
-  source_component_id: z177.string()
+  warning_type: z178.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z178.string(),
+  pcb_component_id: z178.string(),
+  pcb_group_id: z178.string().optional(),
+  subcircuit_id: z178.string().optional(),
+  source_component_id: z178.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z178 } from "zod";
-var connectorOrientationDirection = z178.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z178.object({
-  type: z178.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z179 } from "zod";
+var connectorOrientationDirection = z179.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z179.object({
+  type: z179.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z178.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z178.string(),
-  pcb_component_id: z178.string(),
-  source_component_id: z178.string().optional(),
-  pcb_board_id: z178.string().optional(),
+  warning_type: z179.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z179.string(),
+  pcb_component_id: z179.string(),
+  source_component_id: z179.string().optional(),
+  pcb_board_id: z179.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z178.string().optional()
+  subcircuit_id: z179.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_missing_courtyard_warning.ts
-import { z as z179 } from "zod";
-var pcb_component_missing_courtyard_warning = z179.object({
-  type: z179.literal("pcb_component_missing_courtyard_warning"),
+import { z as z180 } from "zod";
+var pcb_component_missing_courtyard_warning = z180.object({
+  type: z180.literal("pcb_component_missing_courtyard_warning"),
   pcb_component_missing_courtyard_warning_id: getZodPrefixedIdWithDefault(
     "pcb_component_missing_courtyard_warning"
   ),
-  warning_type: z179.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
-  message: z179.string(),
-  pcb_component_id: z179.string(),
-  source_component_id: z179.string().optional(),
-  subcircuit_id: z179.string().optional()
+  warning_type: z180.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
+  message: z180.string(),
+  pcb_component_id: z180.string(),
+  source_component_id: z180.string().optional(),
+  subcircuit_id: z180.string().optional()
 }).describe("Warning emitted when a PCB component has no courtyard geometry");
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z180 } from "zod";
-var supplier_footprint_mismatch_warning = z180.object({
-  type: z180.literal("supplier_footprint_mismatch_warning"),
+import { z as z181 } from "zod";
+var supplier_footprint_mismatch_warning = z181.object({
+  type: z181.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z180.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z180.string(),
-  source_component_id: z180.string(),
-  pcb_component_id: z180.string().optional(),
-  pcb_group_id: z180.string().optional(),
-  subcircuit_id: z180.string().optional(),
+  warning_type: z181.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z181.string(),
+  source_component_id: z181.string(),
+  pcb_component_id: z181.string().optional(),
+  pcb_group_id: z181.string().optional(),
+  subcircuit_id: z181.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z180.string().optional(),
-  supplier_footprint_url: z180.string().optional(),
-  footprint_copper_intersection_over_union: z180.number()
+  supplier_part_number: z181.string().optional(),
+  supplier_footprint_url: z181.string().optional(),
+  footprint_copper_intersection_over_union: z181.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabricator_extra_charge_warning.ts
-import { z as z181 } from "zod";
-var pcb_fabricator_extra_charge_warning = z181.object({
-  type: z181.literal("pcb_fabricator_extra_charge_warning"),
+import { z as z182 } from "zod";
+var pcb_fabricator_extra_charge_warning = z182.object({
+  type: z182.literal("pcb_fabricator_extra_charge_warning"),
   pcb_fabricator_extra_charge_warning_id: getZodPrefixedIdWithDefault(
     "pcb_fabricator_extra_charge_warning"
   ),
-  warning_type: z181.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
-  message: z181.string(),
-  fabricator_preset: z181.string(),
-  pcb_board_id: z181.string().optional(),
-  pcb_via_ids: z181.array(z181.string()).optional(),
-  subcircuit_id: z181.string().optional()
+  warning_type: z182.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
+  message: z182.string(),
+  fabricator_preset: z182.string(),
+  pcb_board_id: z182.string().optional(),
+  pcb_via_ids: z182.array(z182.string()).optional(),
+  subcircuit_id: z182.string().optional()
 }).describe(
   "Warning that a design feature incurs an extra charge for the selected fabricator preset, such as via hole diameters below 0.3 mm with JLCPCB economy or standard presets."
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z182 } from "zod";
-var pcb_breakout_point = z182.object({
-  type: z182.literal("pcb_breakout_point"),
+import { z as z183 } from "zod";
+var pcb_breakout_point = z183.object({
+  type: z183.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z182.string(),
-  subcircuit_id: z182.string().optional(),
-  source_trace_id: z182.string().optional(),
-  source_port_id: z182.string().optional(),
-  source_net_id: z182.string().optional(),
+  pcb_group_id: z183.string(),
+  subcircuit_id: z183.string().optional(),
+  source_trace_id: z183.string().optional(),
+  source_port_id: z183.string().optional(),
+  source_net_id: z183.string().optional(),
   layer: layer_ref.optional(),
   x: distance,
   y: distance
@@ -4136,61 +4186,61 @@ var pcb_breakout_point = z182.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z183 } from "zod";
-var pcb_ground_plane = z183.object({
-  type: z183.literal("pcb_ground_plane"),
+import { z as z184 } from "zod";
+var pcb_ground_plane = z184.object({
+  type: z184.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z183.string(),
-  source_net_id: z183.string(),
-  pcb_group_id: z183.string().optional(),
-  subcircuit_id: z183.string().optional()
+  source_pcb_ground_plane_id: z184.string(),
+  source_net_id: z184.string(),
+  pcb_group_id: z184.string().optional(),
+  subcircuit_id: z184.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z184 } from "zod";
-var pcb_ground_plane_region = z184.object({
-  type: z184.literal("pcb_ground_plane_region"),
+import { z as z185 } from "zod";
+var pcb_ground_plane_region = z185.object({
+  type: z185.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z184.string(),
-  pcb_group_id: z184.string().optional(),
-  subcircuit_id: z184.string().optional(),
+  pcb_ground_plane_id: z185.string(),
+  pcb_group_id: z185.string().optional(),
+  subcircuit_id: z185.string().optional(),
   layer: layer_ref,
-  points: z184.array(point)
+  points: z185.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z185 } from "zod";
-var pcb_thermal_spoke = z185.object({
-  type: z185.literal("pcb_thermal_spoke"),
+import { z as z186 } from "zod";
+var pcb_thermal_spoke = z186.object({
+  type: z186.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z185.string(),
-  shape: z185.string(),
-  spoke_count: z185.number(),
+  pcb_ground_plane_id: z186.string(),
+  shape: z186.string(),
+  spoke_count: z186.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z185.string().optional(),
-  subcircuit_id: z185.string().optional()
+  pcb_plated_hole_id: z186.string().optional(),
+  subcircuit_id: z186.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z186 } from "zod";
-var pcb_copper_pour_base = z186.object({
-  type: z186.literal("pcb_copper_pour"),
+import { z as z187 } from "zod";
+var pcb_copper_pour_base = z187.object({
+  type: z187.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z186.string().optional(),
-  subcircuit_id: z186.string().optional(),
+  pcb_group_id: z187.string().optional(),
+  subcircuit_id: z187.string().optional(),
   layer: layer_ref,
-  source_net_id: z186.string().optional(),
-  covered_with_solder_mask: z186.boolean().optional().default(true)
+  source_net_id: z187.string().optional(),
+  covered_with_solder_mask: z187.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z186.literal("rect"),
+  shape: z187.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -4198,16 +4248,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z186.literal("brep"),
+  shape: z187.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z186.literal("polygon"),
-  points: z186.array(point)
+  shape: z187.literal("polygon"),
+  points: z187.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z186.discriminatedUnion("shape", [
+var pcb_copper_pour = z187.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -4215,99 +4265,99 @@ var pcb_copper_pour = z186.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z187 } from "zod";
+import { z as z188 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z187.literal("pcb_component_outside_board_error"),
+  type: z188.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z187.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z187.string(),
-  pcb_board_id: z187.string(),
+  error_type: z188.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z188.string(),
+  pcb_board_id: z188.string(),
   component_center: point,
-  component_bounds: z187.object({
-    min_x: z187.number(),
-    max_x: z187.number(),
-    min_y: z187.number(),
-    max_y: z187.number()
+  component_bounds: z188.object({
+    min_x: z188.number(),
+    max_x: z188.number(),
+    min_y: z188.number(),
+    max_y: z188.number()
   }),
-  subcircuit_id: z187.string().optional(),
-  source_component_id: z187.string().optional()
+  subcircuit_id: z188.string().optional(),
+  source_component_id: z188.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z188 } from "zod";
+import { z as z189 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z188.literal("pcb_component_not_on_board_edge_error"),
+  type: z189.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z188.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z188.string(),
-  pcb_board_id: z188.string(),
+  error_type: z189.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z189.string(),
+  pcb_board_id: z189.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z188.number(),
-  source_component_id: z188.string().optional(),
-  subcircuit_id: z188.string().optional()
+  pad_to_nearest_board_edge_distance: z189.number(),
+  source_component_id: z189.string().optional(),
+  subcircuit_id: z189.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z189 } from "zod";
+import { z as z190 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z189.literal("pcb_component_invalid_layer_error"),
+  type: z190.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z189.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z189.string().optional(),
-  source_component_id: z189.string(),
+  error_type: z190.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z190.string().optional(),
+  source_component_id: z190.string(),
   layer: layer_ref,
-  subcircuit_id: z189.string().optional()
+  subcircuit_id: z190.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z190 } from "zod";
+import { z as z191 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z190.literal("pcb_via_clearance_error"),
+  type: z191.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z190.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z190.array(z190.string()).min(2),
+  error_type: z191.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z191.array(z191.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z190.object({
-    x: z190.number().optional(),
-    y: z190.number().optional()
+  pcb_center: z191.object({
+    x: z191.number().optional(),
+    y: z191.number().optional()
   }).optional(),
-  subcircuit_id: z190.string().optional()
+  subcircuit_id: z191.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z191 } from "zod";
+import { z as z192 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z191.literal("pcb_via_trace_clearance_error"),
+  type: z192.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z191.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z191.string(),
-  pcb_trace_id: z191.string(),
+  error_type: z192.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z192.string(),
+  pcb_trace_id: z192.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z191.object({
-    x: z191.number().optional(),
-    y: z191.number().optional()
+  center: z192.object({
+    x: z192.number().optional(),
+    y: z192.number().optional()
   }).optional(),
-  subcircuit_id: z191.string().optional()
+  subcircuit_id: z192.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -4316,41 +4366,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z192 } from "zod";
+import { z as z193 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z192.literal("pcb_pad_pad_clearance_error"),
+  type: z193.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z192.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z192.array(z192.string()).min(2),
+  error_type: z193.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z193.array(z193.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z192.object({
-    x: z192.number().optional(),
-    y: z192.number().optional()
+  center: z193.object({
+    x: z193.number().optional(),
+    y: z193.number().optional()
   }).optional(),
-  subcircuit_id: z192.string().optional()
+  subcircuit_id: z193.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z193 } from "zod";
+import { z as z194 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z193.literal("pcb_pad_trace_clearance_error"),
+  type: z194.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z193.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z193.string(),
-  pcb_trace_id: z193.string(),
+  error_type: z194.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z194.string(),
+  pcb_trace_id: z194.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z193.object({
-    x: z193.number().optional(),
-    y: z193.number().optional()
+  center: z194.object({
+    x: z194.number().optional(),
+    y: z194.number().optional()
   }).optional(),
-  subcircuit_id: z193.string().optional()
+  subcircuit_id: z194.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -4359,89 +4409,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z194 } from "zod";
-var pcb_courtyard_rect = z194.object({
-  type: z194.literal("pcb_courtyard_rect"),
+import { z as z195 } from "zod";
+var pcb_courtyard_rect = z195.object({
+  type: z195.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z194.string(),
-  pcb_group_id: z194.string().optional(),
-  subcircuit_id: z194.string().optional(),
+  pcb_component_id: z195.string(),
+  pcb_group_id: z195.string().optional(),
+  subcircuit_id: z195.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z194.string().optional()
+  color: z195.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z195 } from "zod";
-var pcb_courtyard_outline = z195.object({
-  type: z195.literal("pcb_courtyard_outline"),
+import { z as z196 } from "zod";
+var pcb_courtyard_outline = z196.object({
+  type: z196.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z195.string(),
-  pcb_group_id: z195.string().optional(),
-  subcircuit_id: z195.string().optional(),
+  pcb_component_id: z196.string(),
+  pcb_group_id: z196.string().optional(),
+  subcircuit_id: z196.string().optional(),
   layer: visible_layer,
-  outline: z195.array(point).min(2)
+  outline: z196.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z196 } from "zod";
-var pcb_courtyard_polygon = z196.object({
-  type: z196.literal("pcb_courtyard_polygon"),
+import { z as z197 } from "zod";
+var pcb_courtyard_polygon = z197.object({
+  type: z197.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z196.string(),
-  pcb_group_id: z196.string().optional(),
-  subcircuit_id: z196.string().optional(),
+  pcb_component_id: z197.string(),
+  pcb_group_id: z197.string().optional(),
+  subcircuit_id: z197.string().optional(),
   layer: visible_layer,
-  points: z196.array(point).min(3),
-  color: z196.string().optional()
+  points: z197.array(point).min(3),
+  color: z197.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z197 } from "zod";
-var pcb_courtyard_circle = z197.object({
-  type: z197.literal("pcb_courtyard_circle"),
+import { z as z198 } from "zod";
+var pcb_courtyard_circle = z198.object({
+  type: z198.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z197.string(),
-  pcb_group_id: z197.string().optional(),
-  subcircuit_id: z197.string().optional(),
+  pcb_component_id: z198.string(),
+  pcb_group_id: z198.string().optional(),
+  subcircuit_id: z198.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z197.string().optional()
+  color: z198.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z198 } from "zod";
-var pcb_courtyard_pill = z198.object({
-  type: z198.literal("pcb_courtyard_pill"),
+import { z as z199 } from "zod";
+var pcb_courtyard_pill = z199.object({
+  type: z199.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z198.string(),
-  pcb_group_id: z198.string().optional(),
-  subcircuit_id: z198.string().optional(),
+  pcb_component_id: z199.string(),
+  pcb_group_id: z199.string().optional(),
+  subcircuit_id: z199.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z198.string().optional()
+  color: z199.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z199 } from "zod";
+import { z as z200 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -4472,90 +4522,90 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z199.object({
-  type: z199.literal("cad_component"),
-  cad_component_id: z199.string(),
-  pcb_component_id: z199.string().optional().describe(
+var cad_component = z200.object({
+  type: z200.literal("cad_component"),
+  cad_component_id: z200.string(),
+  pcb_component_id: z200.string().optional().describe(
     "Optional PCB component reference; omit for CAD geometry without a PCB component"
   ),
-  source_component_id: z199.string(),
+  source_component_id: z200.string(),
   position: point3,
   rotation: point3.optional(),
-  is_on_folded_board: z199.boolean().optional().describe(
+  is_on_folded_board: z200.boolean().optional().describe(
     "True when position and rotation describe the assembled folded board pose. False or omitted means the flat board pose. PCB records remain flat; pcb_component_id identifies the flat mount and owning board for reversible transforms."
   ),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z199.string().optional(),
+  subcircuit_id: z200.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z199.string().optional(),
-  model_obj_url: z199.string().optional(),
-  model_stl_url: z199.string().optional(),
-  model_3mf_url: z199.string().optional(),
-  model_gltf_url: z199.string().optional(),
-  model_glb_url: z199.string().optional(),
-  model_step_url: z199.string().optional(),
-  model_wrl_url: z199.string().optional(),
+  footprinter_string: z200.string().optional(),
+  model_obj_url: z200.string().optional(),
+  model_stl_url: z200.string().optional(),
+  model_3mf_url: z200.string().optional(),
+  model_gltf_url: z200.string().optional(),
+  model_glb_url: z200.string().optional(),
+  model_step_url: z200.string().optional(),
+  model_wrl_url: z200.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z199.number().optional(),
-  model_board_normal_direction: z199.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z200.number().optional(),
+  model_board_normal_direction: z200.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z199.enum([
+  model_origin_alignment: z200.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z199.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z199.any().optional(),
-  color: z199.string().trim().min(1).optional().describe(
+  model_object_fit: z200.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z200.any().optional(),
+  color: z200.string().trim().min(1).optional().describe(
     "Explicit color override for CAD geometry, including authored JSCAD material colors. Omit to preserve model materials."
   ),
-  show_as_translucent_model: z199.boolean().optional(),
-  show_as_bounding_box: z199.boolean().optional(),
-  show_hidden_edges: z199.boolean().optional(),
-  anchor_alignment: z199.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  show_as_translucent_model: z200.boolean().optional(),
+  show_as_bounding_box: z200.boolean().optional(),
+  show_hidden_edges: z200.boolean().optional(),
+  anchor_alignment: z200.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines CAD geometry, optionally associated with a PCB component");
 expectTypesMatch(true);
 
 // src/cad/cad_collision_error.ts
-import { z as z200 } from "zod";
+import { z as z201 } from "zod";
 var cad_collision_error = base_circuit_json_error.extend({
-  type: z200.literal("cad_collision_error"),
+  type: z201.literal("cad_collision_error"),
   cad_collision_error_id: getZodPrefixedIdWithDefault("cad_collision_error"),
-  error_type: z200.literal("cad_collision_error").default("cad_collision_error"),
-  cad_component_ids: z200.array(z200.string()).min(1),
-  pcb_component_ids: z200.array(z200.string()).optional(),
-  source_component_ids: z200.array(z200.string()).min(1),
-  intersection_area_mm2: z200.number().finite().nonnegative(),
-  threshold_area_mm2: z200.number().finite().nonnegative()
+  error_type: z201.literal("cad_collision_error").default("cad_collision_error"),
+  cad_component_ids: z201.array(z201.string()).min(1),
+  pcb_component_ids: z201.array(z201.string()).optional(),
+  source_component_ids: z201.array(z201.string()).min(1),
+  intersection_area_mm2: z201.number().finite().nonnegative(),
+  threshold_area_mm2: z201.number().finite().nonnegative()
 }).describe(
   "An aperture-bearing part intersects the finished enclosure. The intersection_area_mm2 is the union silhouette area of the solid intersection projected along the aperture face normal, in the right-handed Circuit JSON world frame (+X right, +Y top, +Z above). It is an area in square millimetres, not intersection volume or surface area. This indicates possible aperture misplacement, insufficient size/depth, or body clearance problems; it does not prove which cause applies."
 );
 expectTypesMatch(true);
 
 // src/cad/cad_cable.ts
-import { z as z201 } from "zod";
+import { z as z202 } from "zod";
 var connectorPin1Position = point3.refine(
   (point2) => [point2.x, point2.y, point2.z].every(Number.isFinite),
   "Connector pin 1 positions must be finite"
 ).describe(
   "Resolved pin 1 position at the connector mating face, in right-handed circuit world, millimeters: +X right, +Y top, +Z above. An absolute point, not a direction. Computed by the circuit producer from endpoint geometry. Together with the endpoint path tangent, fixes connector roll and identifies its pin 1 side; renderers must not infer it from footprints."
 );
-var cad_cable = z201.object({
-  type: z201.literal("cad_cable"),
-  cad_cable_id: z201.string(),
-  name: z201.string().min(1),
-  from_source_component_id: z201.string(),
-  to_source_component_id: z201.string(),
+var cad_cable = z202.object({
+  type: z202.literal("cad_cable"),
+  cad_cable_id: z202.string(),
+  name: z202.string().min(1),
+  from_source_component_id: z202.string(),
+  to_source_component_id: z202.string(),
   from_connector_pin1_position: connectorPin1Position.optional(),
   to_connector_pin1_position: connectorPin1Position.optional(),
-  cableprinter_string: z201.string().min(1).describe(
+  cableprinter_string: z202.string().min(1).describe(
     'Physical cable definition, e.g. "usb_c" or "jst_ph_pins6". Independent of the route.'
   ),
-  path: z201.array(point3).min(2).refine(
+  path: z202.array(point3).min(2).refine(
     (path) => path.every(
       (point2, i) => [point2.x, point2.y, point2.z].every(Number.isFinite) && (i === 0 || Math.hypot(
         point2.x - path[i - 1].x,
@@ -4573,27 +4623,27 @@ var cad_cable = z201.object({
 expectTypesMatch(true);
 
 // src/cad/cad_reference_surface.ts
-import { z as z202 } from "zod";
+import { z as z203 } from "zod";
 var FRAME_TOLERANCE = 1e-6;
-var unitDirection = z202.object({
-  x: z202.number().finite(),
-  y: z202.number().finite(),
-  z: z202.number().finite()
+var unitDirection = z203.object({
+  x: z203.number().finite(),
+  y: z203.number().finite(),
+  z: z203.number().finite()
 }).refine(
   (v) => Math.abs(Math.hypot(v.x, v.y, v.z) - 1) <= FRAME_TOLERANCE,
   "Reference surface directions must be unit vectors"
 );
-var extent = distance.pipe(z202.number().finite().positive());
-var cad_reference_surface = z202.object({
-  type: z202.literal("cad_reference_surface"),
-  cad_reference_surface_id: z202.string().min(1),
-  source_component_id: z202.string().min(1).describe(
+var extent = distance.pipe(z203.number().finite().positive());
+var cad_reference_surface = z203.object({
+  type: z203.literal("cad_reference_surface"),
+  cad_reference_surface_id: z203.string().min(1),
+  source_component_id: z203.string().min(1).describe(
     "Owning assembly part's source component ID. The part may have no CAD geometry."
   ),
-  name: z202.string().trim().min(1).describe(
+  name: z203.string().trim().min(1).describe(
     "Reference name, unique within the owning part, e.g. shade in STEM.shade."
   ),
-  shape: z202.literal("rect"),
+  shape: z203.literal("rect"),
   center: point3.refine(
     (p) => [p.x, p.y, p.z].every(Number.isFinite),
     "Reference surface centers must be finite"
@@ -4612,18 +4662,18 @@ var cad_reference_surface = z202.object({
   height: extent.optional().describe(
     "Rectangular extent along normal cross x_axis in millimeters. Supply together with width."
   ),
-  subcircuit_id: z202.string().optional()
+  subcircuit_id: z203.string().optional()
 }).superRefine((surface, ctx) => {
   if (surface.width === void 0 !== (surface.height === void 0))
     ctx.addIssue({
-      code: z202.ZodIssueCode.custom,
+      code: z203.ZodIssueCode.custom,
       path: ["width"],
       message: "Provide width and height together"
     });
   const { normal: n, x_axis: x } = surface;
   if (Math.abs(n.x * x.x + n.y * x.y + n.z * x.z) > FRAME_TOLERANCE)
     ctx.addIssue({
-      code: z202.ZodIssueCode.custom,
+      code: z203.ZodIssueCode.custom,
       path: ["x_axis"],
       message: "x_axis must be perpendicular to normal"
     });
@@ -4635,9 +4685,9 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z203 } from "zod";
-var wave_shape = z203.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z203.union([z203.string(), z203.number()]).transform((val) => {
+import { z as z204 } from "zod";
+var wave_shape = z204.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z204.union([z204.string(), z204.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4646,32 +4696,32 @@ var percentage = z203.union([z203.string(), z203.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z203.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z204.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z203.object({
-  type: z203.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z204.object({
+  type: z204.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z203.literal(true).optional().default(true),
-  positive_source_port_id: z203.string().optional(),
-  negative_source_port_id: z203.string().optional(),
-  positive_source_net_id: z203.string().optional(),
-  negative_source_net_id: z203.string().optional(),
+  is_dc_source: z204.literal(true).optional().default(true),
+  positive_source_port_id: z204.string().optional(),
+  negative_source_port_id: z204.string().optional(),
+  positive_source_net_id: z204.string().optional(),
+  negative_source_net_id: z204.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z203.object({
-  type: z203.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z204.object({
+  type: z204.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z203.literal(false),
-  terminal1_source_port_id: z203.string().optional(),
-  terminal2_source_port_id: z203.string().optional(),
-  terminal1_source_net_id: z203.string().optional(),
-  terminal2_source_net_id: z203.string().optional(),
+  is_dc_source: z204.literal(false),
+  terminal1_source_port_id: z204.string().optional(),
+  terminal2_source_port_id: z204.string().optional(),
+  terminal1_source_net_id: z204.string().optional(),
+  terminal2_source_net_id: z204.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4686,14 +4736,14 @@ var simulation_ac_voltage_source = z203.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z203.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z204.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z204 } from "zod";
-var percentage2 = z204.union([z204.string(), z204.number()]).transform((val) => {
+import { z as z205 } from "zod";
+var percentage2 = z205.union([z205.string(), z205.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4702,32 +4752,32 @@ var percentage2 = z204.union([z204.string(), z204.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z204.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z205.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z204.object({
-  type: z204.literal("simulation_current_source"),
+var simulation_dc_current_source = z205.object({
+  type: z205.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z204.literal(true).optional().default(true),
-  positive_source_port_id: z204.string().optional(),
-  negative_source_port_id: z204.string().optional(),
-  positive_source_net_id: z204.string().optional(),
-  negative_source_net_id: z204.string().optional(),
+  is_dc_source: z205.literal(true).optional().default(true),
+  positive_source_port_id: z205.string().optional(),
+  negative_source_port_id: z205.string().optional(),
+  positive_source_net_id: z205.string().optional(),
+  negative_source_net_id: z205.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z204.object({
-  type: z204.literal("simulation_current_source"),
+var simulation_ac_current_source = z205.object({
+  type: z205.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z204.literal(false),
-  terminal1_source_port_id: z204.string().optional(),
-  terminal2_source_port_id: z204.string().optional(),
-  terminal1_source_net_id: z204.string().optional(),
-  terminal2_source_net_id: z204.string().optional(),
+  is_dc_source: z205.literal(false),
+  terminal1_source_port_id: z205.string().optional(),
+  terminal2_source_port_id: z205.string().optional(),
+  terminal1_source_net_id: z205.string().optional(),
+  terminal2_source_net_id: z205.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4737,61 +4787,61 @@ var simulation_ac_current_source = z204.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z204.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z205.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z206 } from "zod";
+import { z as z207 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z205 } from "zod";
-var simulation_dc_sweep_unit = z205.custom(
+import { z as z206 } from "zod";
+var simulation_dc_sweep_unit = z206.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z205.custom(
+var simulation_parameter_unit = z206.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z206.union([
-  z206.literal("spice_dc_sweep"),
-  z206.literal("spice_dc_operating_point"),
-  z206.literal("spice_transient_analysis"),
-  z206.literal("spice_ac_analysis"),
-  z206.literal("pcb_return_current")
+var experiment_type = z207.union([
+  z207.literal("spice_dc_sweep"),
+  z207.literal("spice_dc_operating_point"),
+  z207.literal("spice_transient_analysis"),
+  z207.literal("spice_ac_analysis"),
+  z207.literal("pcb_return_current")
 ]);
-var spice_simulation_options = z206.object({
-  method: z206.enum(["trap", "gear"]).optional(),
-  reltol: z206.union([z206.number(), z206.string()]).optional(),
-  abstol: z206.union([z206.number(), z206.string()]).optional(),
-  vntol: z206.union([z206.number(), z206.string()]).optional()
+var spice_simulation_options = z207.object({
+  method: z207.enum(["trap", "gear"]).optional(),
+  reltol: z207.union([z207.number(), z207.string()]).optional(),
+  abstol: z207.union([z207.number(), z207.string()]).optional(),
+  vntol: z207.union([z207.number(), z207.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z206.object({
-  type: z206.literal("simulation_experiment"),
+var simulation_experiment = z207.object({
+  type: z207.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z206.string(),
+  name: z207.string(),
   experiment_type,
-  subcircuit_id: z206.string().optional(),
-  spice_engine: z206.string().optional(),
+  subcircuit_id: z207.string().optional(),
+  spice_engine: z207.string().optional(),
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z206.string().optional(),
-  dc_sweep_current_source_id: z206.string().optional(),
-  dc_sweep_start: z206.number().optional(),
-  dc_sweep_stop: z206.number().optional(),
-  dc_sweep_step: z206.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z207.string().optional(),
+  dc_sweep_current_source_id: z207.string().optional(),
+  dc_sweep_start: z207.number().optional(),
+  dc_sweep_stop: z207.number().optional(),
+  dc_sweep_step: z207.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z206.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z206.number().int().positive().optional(),
-  ac_sample_count: z206.number().int().positive().optional(),
-  ac_start_frequency_hz: z206.number().positive().optional(),
-  ac_stop_frequency_hz: z206.number().positive().optional()
+  ac_sweep_type: z207.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z207.number().int().positive().optional(),
+  ac_sample_count: z207.number().int().positive().optional(),
+  ac_start_frequency_hz: z207.number().positive().optional(),
+  ac_stop_frequency_hz: z207.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4803,7 +4853,7 @@ var simulation_experiment = z206.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z206.ZodIssueCode.custom,
+          code: z207.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4813,7 +4863,7 @@ var simulation_experiment = z206.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4822,35 +4872,35 @@ var simulation_experiment = z206.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z206.ZodIssueCode.custom,
+        code: z207.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4860,88 +4910,88 @@ var simulation_experiment = z206.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z208 } from "zod";
+import { z as z209 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z207 } from "zod";
-var simulation_parameter_sweep_coordinate = z207.object({
-  simulation_parameter_sweep_id: z207.string(),
-  sweep_index: z207.number().int().nonnegative(),
-  parameter_value: z207.number(),
+import { z as z208 } from "zod";
+var simulation_parameter_sweep_coordinate = z208.object({
+  simulation_parameter_sweep_id: z208.string(),
+  sweep_index: z208.number().int().nonnegative(),
+  parameter_value: z208.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z208.object({
-  type: z208.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z209.object({
+  type: z209.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z208.string(),
-  simulation_voltage_probe_id: z208.string().optional(),
+  simulation_experiment_id: z209.string(),
+  simulation_voltage_probe_id: z209.string().optional(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z208.array(z208.number()).optional(),
-  voltage_levels: z208.array(z208.number()),
-  source_component_id: z208.string().optional(),
-  subcircuit_connectivity_map_key: z208.string().optional(),
+  timestamps_ms: z209.array(z209.number()).optional(),
+  voltage_levels: z209.array(z209.number()),
+  source_component_id: z209.string().optional(),
+  subcircuit_connectivity_map_key: z209.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z208.string().optional(),
-  color: z208.string().optional()
+  name: z209.string().optional(),
+  color: z209.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z209 } from "zod";
-var simulation_transient_current_graph = z209.object({
-  type: z209.literal("simulation_transient_current_graph"),
+import { z as z210 } from "zod";
+var simulation_transient_current_graph = z210.object({
+  type: z210.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z209.string(),
+  simulation_experiment_id: z210.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z209.array(z209.number()).optional(),
-  current_levels: z209.array(z209.number()),
-  source_component_id: z209.string().optional(),
-  subcircuit_connectivity_map_key: z209.string().optional(),
+  timestamps_ms: z210.array(z210.number()).optional(),
+  current_levels: z210.array(z210.number()),
+  source_component_id: z210.string().optional(),
+  subcircuit_connectivity_map_key: z210.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z209.string().optional(),
-  color: z209.string().optional()
+  name: z210.string().optional(),
+  color: z210.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z210 } from "zod";
-var simulation_switch = z210.object({
-  type: z210.literal("simulation_switch"),
+import { z as z211 } from "zod";
+var simulation_switch = z211.object({
+  type: z211.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z210.string().optional(),
+  source_component_id: z211.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z210.boolean().optional(),
+  starts_closed: z211.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z211 } from "zod";
-var simulation_voltage_probe = z211.object({
-  type: z211.literal("simulation_voltage_probe"),
+import { z as z212 } from "zod";
+var simulation_voltage_probe = z212.object({
+  type: z212.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z211.string().optional(),
-  name: z211.string().optional(),
-  signal_input_source_port_id: z211.string().optional(),
-  signal_input_source_net_id: z211.string().optional(),
-  reference_input_source_port_id: z211.string().optional(),
-  reference_input_source_net_id: z211.string().optional(),
-  subcircuit_id: z211.string().optional(),
-  color: z211.string().optional()
+  source_component_id: z212.string().optional(),
+  name: z212.string().optional(),
+  signal_input_source_port_id: z212.string().optional(),
+  signal_input_source_net_id: z212.string().optional(),
+  reference_input_source_port_id: z212.string().optional(),
+  reference_input_source_net_id: z212.string().optional(),
+  subcircuit_id: z212.string().optional(),
+  color: z212.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4951,20 +5001,20 @@ var simulation_voltage_probe = z211.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z212.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z211.ZodIssueCode.custom,
+          code: z212.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z211.ZodIssueCode.custom,
+          code: z212.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4972,7 +5022,7 @@ var simulation_voltage_probe = z211.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z211.ZodIssueCode.custom,
+        code: z212.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4981,20 +5031,20 @@ var simulation_voltage_probe = z211.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z212 } from "zod";
-var simulation_current_probe = z212.object({
-  type: z212.literal("simulation_current_probe"),
+import { z as z213 } from "zod";
+var simulation_current_probe = z213.object({
+  type: z213.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z212.string().optional(),
-  name: z212.string().optional(),
-  positive_source_port_id: z212.string().optional(),
-  negative_source_port_id: z212.string().optional(),
-  positive_source_net_id: z212.string().optional(),
-  negative_source_net_id: z212.string().optional(),
-  subcircuit_id: z212.string().optional(),
-  color: z212.string().optional()
+  source_component_id: z213.string().optional(),
+  name: z213.string().optional(),
+  positive_source_port_id: z213.string().optional(),
+  negative_source_port_id: z213.string().optional(),
+  positive_source_net_id: z213.string().optional(),
+  negative_source_net_id: z213.string().optional(),
+  subcircuit_id: z213.string().optional(),
+  color: z213.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -5006,7 +5056,7 @@ var simulation_current_probe = z212.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z212.ZodIssueCode.custom,
+      code: z213.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -5014,7 +5064,7 @@ var simulation_current_probe = z212.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z212.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -5023,71 +5073,71 @@ var simulation_current_probe = z212.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z212.ZodIssueCode.custom,
+        code: z213.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z212.ZodIssueCode.custom,
+    code: z213.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z213 } from "zod";
+import { z as z214 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z213.literal("simulation_unknown_experiment_error"),
+  type: z214.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z213.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z213.string().optional(),
-  subcircuit_id: z213.string().optional()
+  error_type: z214.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z214.string().optional(),
+  subcircuit_id: z214.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z214 } from "zod";
-var simulation_parameter_type = z214.enum([
+import { z as z215 } from "zod";
+var simulation_parameter_type = z215.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z214.object({
-  type: z214.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z215.object({
+  type: z215.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z214.string(),
-  name: z214.string().optional(),
-  parameter_values: z214.array(z214.number()).min(1),
+  simulation_experiment_id: z215.string(),
+  name: z215.string().optional(),
+  parameter_values: z215.array(z215.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z214.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z215.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z214.literal("resistance"),
-    resistor_source_component_id: z214.string()
+    parameter_type: z215.literal("resistance"),
+    resistor_source_component_id: z215.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z214.literal("capacitance"),
-    capacitor_source_component_id: z214.string()
+    parameter_type: z215.literal("capacitance"),
+    capacitor_source_component_id: z215.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z214.literal("inductance"),
-    inductor_source_component_id: z214.string()
+    parameter_type: z215.literal("inductance"),
+    inductor_source_component_id: z215.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z214.literal("voltage"),
-    source_net_id: z214.string()
+    parameter_type: z215.literal("voltage"),
+    source_net_id: z215.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z214.literal("current"),
-    current_source_component_id: z214.string()
+    parameter_type: z215.literal("current"),
+    current_source_component_id: z215.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -5095,52 +5145,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z215 } from "zod";
-var simulation_dc_operating_point_voltage = z215.object({
-  type: z215.literal("simulation_dc_operating_point_voltage"),
+import { z as z216 } from "zod";
+var simulation_dc_operating_point_voltage = z216.object({
+  type: z216.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z215.string(),
+  simulation_experiment_id: z216.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z215.string(),
-  voltage: z215.number(),
-  name: z215.string().optional(),
-  color: z215.string().optional()
+  simulation_voltage_probe_id: z216.string(),
+  voltage: z216.number(),
+  name: z216.string().optional(),
+  color: z216.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z216 } from "zod";
-var simulation_dc_operating_point_current = z216.object({
-  type: z216.literal("simulation_dc_operating_point_current"),
+import { z as z217 } from "zod";
+var simulation_dc_operating_point_current = z217.object({
+  type: z217.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z216.string(),
+  simulation_experiment_id: z217.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z216.string(),
-  current: z216.number(),
-  name: z216.string().optional(),
-  color: z216.string().optional()
+  simulation_current_probe_id: z217.string(),
+  current: z217.number(),
+  name: z217.string().optional(),
+  color: z217.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z217 } from "zod";
-var simulation_dc_sweep_voltage_graph = z217.object({
-  type: z217.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z218 } from "zod";
+var simulation_dc_sweep_voltage_graph = z218.object({
+  type: z218.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z217.string(),
+  simulation_experiment_id: z218.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z217.string(),
-  sweep_values: z217.array(z217.number()),
+  simulation_voltage_probe_id: z218.string(),
+  sweep_values: z218.array(z218.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z217.array(z217.number()),
-  name: z217.string().optional(),
-  color: z217.string().optional()
+  voltage_levels: z218.array(z218.number()),
+  name: z218.string().optional(),
+  color: z218.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -5150,20 +5200,20 @@ var simulation_dc_sweep_voltage_graph = z217.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z218 } from "zod";
-var simulation_dc_sweep_current_graph = z218.object({
-  type: z218.literal("simulation_dc_sweep_current_graph"),
+import { z as z219 } from "zod";
+var simulation_dc_sweep_current_graph = z219.object({
+  type: z219.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z218.string(),
+  simulation_experiment_id: z219.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z218.string(),
-  sweep_values: z218.array(z218.number()),
+  simulation_current_probe_id: z219.string(),
+  sweep_values: z219.array(z219.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z218.array(z218.number()),
-  name: z218.string().optional(),
-  color: z218.string().optional()
+  current_levels: z219.array(z219.number()),
+  name: z219.string().optional(),
+  color: z219.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -5173,29 +5223,29 @@ var simulation_dc_sweep_current_graph = z218.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z220 } from "zod";
+import { z as z221 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z219 } from "zod";
-var simulation_complex_sample = z219.object({
-  re: z219.number(),
-  im: z219.number()
+import { z as z220 } from "zod";
+var simulation_complex_sample = z220.object({
+  re: z220.number(),
+  im: z220.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z220.object({
-  type: z220.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z221.object({
+  type: z221.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z220.string(),
+  simulation_experiment_id: z221.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z220.string(),
-  frequencies_hz: z220.array(z220.number()),
-  complex_voltages: z220.array(simulation_complex_sample),
-  name: z220.string().optional(),
-  color: z220.string().optional()
+  simulation_voltage_probe_id: z221.string(),
+  frequencies_hz: z221.array(z221.number()),
+  complex_voltages: z221.array(simulation_complex_sample),
+  name: z221.string().optional(),
+  color: z221.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -5205,19 +5255,19 @@ var simulation_ac_sweep_voltage_graph = z220.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z221 } from "zod";
-var simulation_ac_sweep_current_graph = z221.object({
-  type: z221.literal("simulation_ac_sweep_current_graph"),
+import { z as z222 } from "zod";
+var simulation_ac_sweep_current_graph = z222.object({
+  type: z222.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z221.string(),
+  simulation_experiment_id: z222.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z221.string(),
-  frequencies_hz: z221.array(z221.number()),
-  complex_currents: z221.array(simulation_complex_sample),
-  name: z221.string().optional(),
-  color: z221.string().optional()
+  simulation_current_probe_id: z222.string(),
+  frequencies_hz: z222.array(z222.number()),
+  complex_currents: z222.array(simulation_complex_sample),
+  name: z222.string().optional(),
+  color: z222.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -5227,52 +5277,52 @@ var simulation_ac_sweep_current_graph = z221.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z222 } from "zod";
-var simulation_op_amp = z222.object({
-  type: z222.literal("simulation_op_amp"),
+import { z as z223 } from "zod";
+var simulation_op_amp = z223.object({
+  type: z223.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z222.string().optional(),
-  inverting_input_source_port_id: z222.string(),
-  non_inverting_input_source_port_id: z222.string(),
-  output_source_port_id: z222.string(),
-  positive_supply_source_port_id: z222.string(),
-  negative_supply_source_port_id: z222.string()
+  source_component_id: z223.string().optional(),
+  inverting_input_source_port_id: z223.string(),
+  non_inverting_input_source_port_id: z223.string(),
+  output_source_port_id: z223.string(),
+  positive_supply_source_port_id: z223.string(),
+  negative_supply_source_port_id: z223.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z223 } from "zod";
-var simulation_spice_subcircuit = z223.object({
-  type: z223.literal("simulation_spice_subcircuit"),
+import { z as z224 } from "zod";
+var simulation_spice_subcircuit = z224.object({
+  type: z224.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z223.string(),
-  spice_pin_to_source_port_map: z223.record(z223.string(), z223.string()),
-  subcircuit_source: z223.string()
+  source_component_id: z224.string(),
+  spice_pin_to_source_port_map: z224.record(z224.string(), z224.string()),
+  subcircuit_source: z224.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z224 } from "zod";
+import { z as z225 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z224.object({
-  type: z224.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z225.object({
+  type: z225.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z224.string().optional(),
-  simulation_transient_current_graph_id: z224.string().optional(),
-  simulation_voltage_probe_id: z224.string().optional(),
-  simulation_current_probe_id: z224.string().optional(),
-  display_name: z224.string().optional(),
-  color: z224.string().optional(),
-  display_center_value: z224.number().optional(),
-  display_center_offset_divs: z224.number().optional(),
-  volts_per_div: z224.number().positive().optional(),
-  amps_per_div: z224.number().positive().optional()
+  simulation_transient_voltage_graph_id: z225.string().optional(),
+  simulation_transient_current_graph_id: z225.string().optional(),
+  simulation_voltage_probe_id: z225.string().optional(),
+  simulation_current_probe_id: z225.string().optional(),
+  display_name: z225.string().optional(),
+  color: z225.string().optional(),
+  display_center_value: z225.number().optional(),
+  display_center_offset_divs: z225.number().optional(),
+  volts_per_div: z225.number().positive().optional(),
+  amps_per_div: z225.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -5286,19 +5336,19 @@ var simulation_oscilloscope_trace = z224.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z224.ZodIssueCode.custom,
+      code: z225.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z224.ZodIssueCode.custom,
+      code: z225.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z224.ZodIssueCode.custom,
+      code: z225.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -5306,47 +5356,47 @@ var simulation_oscilloscope_trace = z224.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ibis_model.ts
-import { z as z225 } from "zod";
-var ibisAssetPath = z225.string().min(1).regex(/^(?!\s|[a-z][a-z\d+.-]*:|[/\\])[^\\\u0000-\u001f\u007f]+$/i);
-var simulation_ibis_model = z225.object({
-  type: z225.literal("simulation_ibis_model"),
+import { z as z226 } from "zod";
+var ibisAssetPath = z226.string().min(1).regex(/^(?!\s|[a-z][a-z\d+.-]*:|[/\\])[^\\\u0000-\u001f\u007f]+$/i);
+var simulation_ibis_model = z226.object({
+  type: z226.literal("simulation_ibis_model"),
   simulation_ibis_model_id: getZodPrefixedIdWithDefault(
     "simulation_ibis_model"
   ),
-  source_component_id: z225.string().min(1),
+  source_component_id: z226.string().min(1),
   // Consumers must still apply their own fetch policy to prevent SSRF.
   ibis_model_asset: asset.extend({
     project_relative_path: ibisAssetPath,
-    url: z225.string().url().regex(/^https?:\/\//i).or(ibisAssetPath)
+    url: z226.string().url().regex(/^https?:\/\//i).or(ibisAssetPath)
   }).describe(
     "Reference to the .ibs file containing the vendor's IBIS models"
   ),
-  ibis_component_name: z225.string().min(1).describe("Name of the [Component] section in the IBIS file"),
-  ibis_pin_name_to_source_port_id: z225.record(z225.string().min(1), z225.string().min(1)).refine(
+  ibis_component_name: z226.string().min(1).describe("Name of the [Component] section in the IBIS file"),
+  ibis_pin_name_to_source_port_id: z226.record(z226.string().min(1), z226.string().min(1)).refine(
     (pins) => Object.keys(pins).length > 0,
     "At least one physical IBIS pin is required"
   ).describe(
     "Maps pin names from the IBIS [Pin] table, such as A1 or 12, to physical source_port_id values"
   ),
-  ibis_pin_name_to_model_name: z225.record(z225.string().min(1), z225.string().min(1)).optional().describe(
+  ibis_pin_name_to_model_name: z226.record(z226.string().min(1), z226.string().min(1)).optional().describe(
     "Maps an IBIS pin name to the selected [Model] name when its [Model Selector] has multiple buffers"
   ),
-  ibis_pin_name_to_reference_source_port_ids: z225.record(
-    z225.string().min(1),
-    z225.object({
-      pullup_reference_source_port_id: z225.string().min(1).optional(),
-      pulldown_reference_source_port_id: z225.string().min(1).optional(),
-      power_clamp_reference_source_port_id: z225.string().min(1).optional(),
-      ground_clamp_reference_source_port_id: z225.string().min(1).optional(),
-      external_reference_source_port_id: z225.string().min(1).optional()
+  ibis_pin_name_to_reference_source_port_ids: z226.record(
+    z226.string().min(1),
+    z226.object({
+      pullup_reference_source_port_id: z226.string().min(1).optional(),
+      pulldown_reference_source_port_id: z226.string().min(1).optional(),
+      power_clamp_reference_source_port_id: z226.string().min(1).optional(),
+      ground_clamp_reference_source_port_id: z226.string().min(1).optional(),
+      external_reference_source_port_id: z226.string().min(1).optional()
     }).strict()
   ).optional().describe(
     "Maps each IBIS signal pin name to the physical source ports used as its buffer supply/clamp references"
   ),
-  model_value_corner: z225.union([z225.literal("typical"), z225.literal("minimum"), z225.literal("maximum")]).describe(
+  model_value_corner: z226.union([z226.literal("typical"), z226.literal("minimum"), z226.literal("maximum")]).describe(
     "Selects the typ, min, or max column of numerical data in the IBIS model"
   ),
-  include_package_parasitics: z225.boolean().describe(
+  include_package_parasitics: z226.boolean().describe(
     "Whether the runner includes the IBIS vendor's package resistance, inductance, and capacitance"
   )
 }).superRefine((model, context) => {
@@ -5360,7 +5410,7 @@ var simulation_ibis_model = z225.object({
     for (const pin of Object.keys(model[field] ?? {})) {
       if (!boundPins.has(pin)) {
         context.addIssue({
-          code: z225.ZodIssueCode.custom,
+          code: z226.ZodIssueCode.custom,
           path: [field, pin],
           message: `IBIS pin "${pin}" must be bound in ibis_pin_name_to_source_port_id`
         });
@@ -5372,22 +5422,22 @@ var simulation_ibis_model = z225.object({
 );
 
 // src/simulation/simulation_ibis_pin_state.ts
-import { z as z226 } from "zod";
-var simulation_ibis_pin_state = z226.object({
-  type: z226.literal("simulation_ibis_pin_state"),
+import { z as z227 } from "zod";
+var simulation_ibis_pin_state = z227.object({
+  type: z227.literal("simulation_ibis_pin_state"),
   simulation_ibis_pin_state_id: getZodPrefixedIdWithDefault(
     "simulation_ibis_pin_state"
   ),
-  simulation_experiment_id: z226.string().min(1),
-  source_port_id: z226.string().min(1),
-  is_output: z226.boolean().describe(
+  simulation_experiment_id: z227.string().min(1),
+  source_port_id: z227.string().min(1),
+  is_output: z227.boolean().describe(
     "True selects output mode; false selects input mode for this experiment"
   ),
-  is_output_enabled: z226.boolean().optional()
+  is_output_enabled: z227.boolean().optional()
 }).superRefine((pin, context) => {
   if (pin.is_output && pin.is_output_enabled === void 0 || !pin.is_output && pin.is_output_enabled !== void 0) {
     context.addIssue({
-      code: z226.ZodIssueCode.custom,
+      code: z227.ZodIssueCode.custom,
       path: ["is_output_enabled"],
       message: "Only output pins require an explicit is_output_enabled boolean"
     });
@@ -5397,41 +5447,41 @@ var simulation_ibis_pin_state = z226.object({
 );
 
 // src/simulation/simulation_digital_stimulus.ts
-import { z as z227 } from "zod";
+import { z as z228 } from "zod";
 var MAX_PATTERN_BITS = 65536;
-var simulation_digital_stimulus = z227.object({
-  type: z227.literal("simulation_digital_stimulus"),
+var simulation_digital_stimulus = z228.object({
+  type: z228.literal("simulation_digital_stimulus"),
   simulation_digital_stimulus_id: getZodPrefixedIdWithDefault(
     "simulation_digital_stimulus"
   ),
-  name: z227.string().min(1),
-  simulation_experiment_id: z227.string().min(1),
-  source_port_id: z227.string().min(1),
+  name: z228.string().min(1),
+  simulation_experiment_id: z228.string().min(1),
+  source_port_id: z228.string().min(1),
   bit_duration_ms: ms.refine((milliseconds) => milliseconds > 0),
   start_time_ms: ms.refine((milliseconds) => milliseconds >= 0),
-  initial_state: z227.union([z227.literal(0), z227.literal(1)]),
-  inverted: z227.boolean(),
-  transmission_pattern: z227.object({
-    transmission_type: z227.literal("bits"),
-    bits: z227.string().max(MAX_PATTERN_BITS).regex(/^[01]+$/).or(
-      z227.array(z227.union([z227.literal(0), z227.literal(1)])).min(1).max(MAX_PATTERN_BITS)
+  initial_state: z228.union([z228.literal(0), z228.literal(1)]),
+  inverted: z228.boolean(),
+  transmission_pattern: z228.object({
+    transmission_type: z228.literal("bits"),
+    bits: z228.string().max(MAX_PATTERN_BITS).regex(/^[01]+$/).or(
+      z228.array(z228.union([z228.literal(0), z228.literal(1)])).min(1).max(MAX_PATTERN_BITS)
     ),
-    repeat: z227.boolean()
+    repeat: z228.boolean()
   }).strict()
 }).describe(
   "Declares a digital transmission pattern and bit duration in milliseconds for a physical source port"
 );
 
 // src/simulation/simulation_eye_diagram.ts
-import { z as z228 } from "zod";
-var simulation_eye_diagram = z228.object({
-  type: z228.literal("simulation_eye_diagram"),
+import { z as z229 } from "zod";
+var simulation_eye_diagram = z229.object({
+  type: z229.literal("simulation_eye_diagram"),
   simulation_eye_diagram_id: getZodPrefixedIdWithDefault(
     "simulation_eye_diagram"
   ),
-  name: z228.string().min(1),
-  simulation_experiment_id: z228.string().min(1),
-  simulation_voltage_probe_id: z228.string().min(1),
+  name: z229.string().min(1),
+  simulation_experiment_id: z229.string().min(1),
+  simulation_voltage_probe_id: z229.string().min(1),
   unit_interval_ms: ms.refine((milliseconds) => milliseconds > 0),
   time_origin_ms: ms,
   start_time_ms: ms.refine((milliseconds) => milliseconds >= 0).optional(),
@@ -5439,7 +5489,7 @@ var simulation_eye_diagram = z228.object({
 }).superRefine((eye, context) => {
   if (eye.start_time_ms !== void 0 && eye.end_time_ms !== void 0 && eye.start_time_ms >= eye.end_time_ms) {
     context.addIssue({
-      code: z228.ZodIssueCode.custom,
+      code: z229.ZodIssueCode.custom,
       path: ["end_time_ms"],
       message: "Eye gate end must follow its start"
     });
@@ -5449,51 +5499,51 @@ var simulation_eye_diagram = z228.object({
 );
 
 // src/simulation/simulation_return_current_contact.ts
-import { z as z229 } from "zod";
-var contact_position = z229.object({
-  x: z229.number().finite(),
-  y: z229.number().finite(),
+import { z as z230 } from "zod";
+var contact_position = z230.object({
+  x: z230.number().finite(),
+  y: z230.number().finite(),
   layer: layer_ref
 });
-var simulation_return_current_contact = z229.discriminatedUnion("contact_type", [
+var simulation_return_current_contact = z230.discriminatedUnion("contact_type", [
   contact_position.extend({
-    contact_type: z229.literal("pcb_port"),
-    pcb_port_id: z229.string().min(1)
+    contact_type: z230.literal("pcb_port"),
+    pcb_port_id: z230.string().min(1)
   }),
   contact_position.extend({
-    contact_type: z229.literal("pcb_via"),
-    pcb_via_id: z229.string().min(1)
+    contact_type: z230.literal("pcb_via"),
+    pcb_via_id: z230.string().min(1)
   }),
   contact_position.extend({
-    contact_type: z229.literal("pcb_copper_pour"),
-    pcb_copper_pour_id: z229.string().min(1)
+    contact_type: z230.literal("pcb_copper_pour"),
+    pcb_copper_pour_id: z230.string().min(1)
   })
 ]).describe("Identifies the reference conductor at a return-current contact");
 expectTypesMatch(true);
 
 // src/simulation/simulation_terminal_port.ts
-import { z as z230 } from "zod";
-var simulation_terminal_port = z230.object({
-  signal_pcb_port_id: z230.string().min(1),
-  reference_pcb_port_id: z230.string().min(1).optional(),
+import { z as z231 } from "zod";
+var simulation_terminal_port = z231.object({
+  signal_pcb_port_id: z231.string().min(1),
+  reference_pcb_port_id: z231.string().min(1).optional(),
   reference_layer: layer_ref,
-  resistance: z230.number().finite().positive()
+  resistance: z231.number().finite().positive()
 }).describe(
   "A two-terminal return-current excitation port with resistance in ohms"
 );
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_excitation.ts
-import { z as z231 } from "zod";
-var simulation_return_current_excitation = z231.object({
-  type: z231.literal("simulation_return_current_excitation"),
+import { z as z232 } from "zod";
+var simulation_return_current_excitation = z232.object({
+  type: z232.literal("simulation_return_current_excitation"),
   simulation_return_current_excitation_id: getZodPrefixedIdWithDefault(
     "simulation_return_current_excitation"
   ),
-  simulation_experiment_id: z231.string().min(1),
-  pcb_trace_id: z231.string().min(1),
-  ground_source_net_id: z231.string().min(1),
-  current: z231.number().finite(),
+  simulation_experiment_id: z232.string().min(1),
+  pcb_trace_id: z232.string().min(1),
+  ground_source_net_id: z232.string().min(1),
+  current: z232.number().finite(),
   return_source: simulation_return_current_contact,
   return_sink: simulation_return_current_contact,
   source_port: simulation_terminal_port.optional(),
@@ -5504,34 +5554,34 @@ var simulation_return_current_excitation = z231.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_pcb_return_current_result.ts
-import { z as z232 } from "zod";
-var simulation_pcb_return_current_result = z232.object({
-  type: z232.literal("simulation_pcb_return_current_result"),
+import { z as z233 } from "zod";
+var simulation_pcb_return_current_result = z233.object({
+  type: z233.literal("simulation_pcb_return_current_result"),
   simulation_pcb_return_current_result_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_result"
   ),
-  simulation_experiment_id: z232.string().min(1),
-  pcb_board_id: z232.string().min(1),
-  simulation_return_current_excitation_ids: z232.array(z232.string().min(1)).min(1).refine(
+  simulation_experiment_id: z233.string().min(1),
+  pcb_board_id: z233.string().min(1),
+  simulation_return_current_excitation_ids: z233.array(z233.string().min(1)).min(1).refine(
     (ids) => new Set(ids).size === ids.length,
     "Excitation IDs must be unique"
   ),
-  frequency_hz: z232.number().finite().positive().optional()
+  frequency_hz: z233.number().finite().positive().optional()
 }).describe(
   "A PCB return-current result at one frequency, or a frequency-independent result when frequency_hz is absent"
 );
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_asset.ts
-import { z as z233 } from "zod";
+import { z as z234 } from "zod";
 function createSimulationReturnCurrentAssetSchema(mimetypes) {
   return asset.extend({
-    project_relative_path: z233.string().min(1),
-    url: z233.string().url()
+    project_relative_path: z234.string().min(1),
+    url: z234.string().url()
   }).superRefine((value, context) => {
     if (!mimetypes.includes(value.mimetype)) {
       context.addIssue({
-        code: z233.ZodIssueCode.custom,
+        code: z234.ZodIssueCode.custom,
         path: ["mimetype"],
         message: `Expected one of: ${mimetypes.join(", ")}`
       });
@@ -5540,7 +5590,7 @@ function createSimulationReturnCurrentAssetSchema(mimetypes) {
       const mediaType = /^data:([^;,]*)(?:;[^,]*)?,/i.exec(value.url)?.[1];
       if (mediaType?.toLowerCase() !== value.mimetype) {
         context.addIssue({
-          code: z233.ZodIssueCode.custom,
+          code: z234.ZodIssueCode.custom,
           path: ["url"],
           message: "Data URL media type must match asset.mimetype"
         });
@@ -5555,29 +5605,29 @@ var simulation_return_current_field_asset = createSimulationReturnCurrentAssetSc
 var simulation_return_current_image_asset = createSimulationReturnCurrentAssetSchema(["image/png", "image/webp"]);
 
 // src/simulation/simulation_pcb_return_current_field.ts
-import { z as z234 } from "zod";
-var simulation_pcb_return_current_field = z234.object({
-  type: z234.literal("simulation_pcb_return_current_field"),
+import { z as z235 } from "zod";
+var simulation_pcb_return_current_field = z235.object({
+  type: z235.literal("simulation_pcb_return_current_field"),
   simulation_pcb_return_current_field_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_field"
   ),
-  simulation_pcb_return_current_result_id: z234.string().min(1),
+  simulation_pcb_return_current_result_id: z235.string().min(1),
   layer: layer_ref,
-  source_net_id: z234.string().min(1),
-  field_type: z234.enum(["real", "complex_phasor"]),
-  min_x: z234.number().finite(),
-  min_y: z234.number().finite(),
-  columns: z234.number().int().positive().safe(),
-  rows: z234.number().int().positive().safe(),
-  cell_width: z234.number().finite().positive(),
-  cell_height: z234.number().finite().positive(),
-  copper_thickness: z234.number().finite().positive(),
-  data_format: z234.literal("simulation_return_current_grid_json_v1"),
+  source_net_id: z235.string().min(1),
+  field_type: z235.enum(["real", "complex_phasor"]),
+  min_x: z235.number().finite(),
+  min_y: z235.number().finite(),
+  columns: z235.number().int().positive().safe(),
+  rows: z235.number().int().positive().safe(),
+  cell_width: z235.number().finite().positive(),
+  cell_height: z235.number().finite().positive(),
+  copper_thickness: z235.number().finite().positive(),
+  data_format: z235.literal("simulation_return_current_grid_json_v1"),
   field_asset: simulation_return_current_field_asset
 }).superRefine((field, context) => {
   if (!Number.isSafeInteger(field.columns * field.rows)) {
     context.addIssue({
-      code: z234.ZodIssueCode.custom,
+      code: z235.ZodIssueCode.custom,
       path: ["columns"],
       message: "The grid cell count must be a safe integer"
     });
@@ -5588,16 +5638,16 @@ var simulation_pcb_return_current_field = z234.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_return_current_grid_json.ts
-import { z as z235 } from "zod";
-var channel = z235.array(z235.number().finite().nullable()).min(1);
-var simulation_return_current_grid_json = z235.discriminatedUnion("field_type", [
-  z235.object({
-    field_type: z235.literal("real"),
+import { z as z236 } from "zod";
+var channel = z236.array(z236.number().finite().nullable()).min(1);
+var simulation_return_current_grid_json = z236.discriminatedUnion("field_type", [
+  z236.object({
+    field_type: z236.literal("real"),
     sheet_current_x: channel,
     sheet_current_y: channel
   }),
-  z235.object({
-    field_type: z235.literal("complex_phasor"),
+  z236.object({
+    field_type: z236.literal("complex_phasor"),
     sheet_current_x_real: channel,
     sheet_current_x_imag: channel,
     sheet_current_y_real: channel,
@@ -5613,7 +5663,7 @@ var simulation_return_current_grid_json = z235.discriminatedUnion("field_type",
   const first = channels[0];
   if (channels.some((values) => values.length !== first.length)) {
     context.addIssue({
-      code: z235.ZodIssueCode.custom,
+      code: z236.ZodIssueCode.custom,
       message: "Current channels must have equal lengths"
     });
     return;
@@ -5622,7 +5672,7 @@ var simulation_return_current_grid_json = z235.discriminatedUnion("field_type",
     const masked = first[index] === null;
     if (channels.some((values) => values[index] === null !== masked)) {
       context.addIssue({
-        code: z235.ZodIssueCode.custom,
+        code: z236.ZodIssueCode.custom,
         message: `Cell ${index} must be null in every channel or finite in every channel`
       });
       return;
@@ -5639,7 +5689,7 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
   return simulation_return_current_grid_json.superRefine((grid, context) => {
     if (grid.field_type !== field.field_type) {
       context.addIssue({
-        code: z235.ZodIssueCode.custom,
+        code: z236.ZodIssueCode.custom,
         path: ["field_type"],
         message: "Decoded field_type must match the parent field"
       });
@@ -5647,7 +5697,7 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
     const first = grid.field_type === "real" ? grid.sheet_current_x : grid.sheet_current_x_real;
     if (first.length !== count) {
       context.addIssue({
-        code: z235.ZodIssueCode.custom,
+        code: z236.ZodIssueCode.custom,
         message: `Each current channel must have ${count} entries (columns * rows)`
       });
     }
@@ -5655,25 +5705,25 @@ function getSimulationReturnCurrentGridJsonSchema(field) {
 }
 
 // src/simulation/simulation_pcb_return_current_heatmap.ts
-import { z as z236 } from "zod";
-var simulation_pcb_return_current_heatmap = z236.object({
-  type: z236.literal("simulation_pcb_return_current_heatmap"),
+import { z as z237 } from "zod";
+var simulation_pcb_return_current_heatmap = z237.object({
+  type: z237.literal("simulation_pcb_return_current_heatmap"),
   simulation_pcb_return_current_heatmap_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_heatmap"
   ),
-  simulation_pcb_return_current_result_id: z236.string().min(1),
+  simulation_pcb_return_current_result_id: z237.string().min(1),
   layer: layer_ref,
-  source_net_id: z236.string().min(1),
-  min_x: z236.number().finite(),
-  min_y: z236.number().finite(),
-  max_x: z236.number().finite(),
-  max_y: z236.number().finite(),
+  source_net_id: z237.string().min(1),
+  min_x: z237.number().finite(),
+  min_y: z237.number().finite(),
+  max_x: z237.number().finite(),
+  max_y: z237.number().finite(),
   image_asset: simulation_return_current_image_asset
 }).superRefine((heatmap, context) => {
   for (const axis of ["x", "y"]) {
     if (heatmap[`max_${axis}`] <= heatmap[`min_${axis}`]) {
       context.addIssue({
-        code: z236.ZodIssueCode.custom,
+        code: z237.ZodIssueCode.custom,
         path: [`max_${axis}`],
         message: "Heatmap bounds must have positive width and height"
       });
@@ -5685,14 +5735,14 @@ var simulation_pcb_return_current_heatmap = z236.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_pcb_return_current_marker.ts
-import { z as z237 } from "zod";
-var marker_base = z237.object({
-  type: z237.literal("simulation_pcb_return_current_marker"),
+import { z as z238 } from "zod";
+var marker_base = z238.object({
+  type: z238.literal("simulation_pcb_return_current_marker"),
   simulation_pcb_return_current_marker_id: getZodPrefixedIdWithDefault(
     "simulation_pcb_return_current_marker"
   ),
-  simulation_pcb_return_current_result_id: z237.string().min(1),
-  role: z237.enum([
+  simulation_pcb_return_current_result_id: z238.string().min(1),
+  role: z238.enum([
     "signal_source",
     "signal_load",
     "return_source",
@@ -5700,33 +5750,33 @@ var marker_base = z237.object({
     "signal_transition",
     "return_transition"
   ]),
-  label: z237.string().optional(),
-  label_x: z237.number().finite().optional(),
-  label_y: z237.number().finite().optional()
+  label: z238.string().optional(),
+  label_x: z238.number().finite().optional(),
+  label_y: z238.number().finite().optional()
 });
-var simulation_pcb_return_current_marker = z237.discriminatedUnion("target_type", [
+var simulation_pcb_return_current_marker = z238.discriminatedUnion("target_type", [
   marker_base.extend({
-    target_type: z237.literal("pcb_port"),
-    pcb_port_id: z237.string().min(1),
+    target_type: z238.literal("pcb_port"),
+    pcb_port_id: z238.string().min(1),
     layer: layer_ref
   }),
   marker_base.extend({
-    target_type: z237.literal("pcb_via"),
-    pcb_via_id: z237.string().min(1),
+    target_type: z238.literal("pcb_via"),
+    pcb_via_id: z238.string().min(1),
     from_layer: layer_ref,
     to_layer: layer_ref
   })
 ]).superRefine((marker, context) => {
   if (marker.label_x === void 0 !== (marker.label_y === void 0)) {
     context.addIssue({
-      code: z237.ZodIssueCode.custom,
+      code: z238.ZodIssueCode.custom,
       path: ["label_x"],
       message: "label_x and label_y must be provided together"
     });
   }
   if (marker.target_type === "pcb_via" && marker.from_layer === marker.to_layer) {
     context.addIssue({
-      code: z237.ZodIssueCode.custom,
+      code: z238.ZodIssueCode.custom,
       path: ["to_layer"],
       message: "A via transition must connect distinct layers"
     });
@@ -5737,8 +5787,143 @@ var simulation_pcb_return_current_marker = z237.discriminatedUnion("target_type"
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z238 } from "zod";
-var any_circuit_element = z238.union([
+import { z as z243 } from "zod";
+
+// src/drawing/drawing_page.ts
+import { z as z240 } from "zod";
+
+// src/drawing/drawing_page_size.ts
+import { z as z239 } from "zod";
+var drawingPageSizes = {
+  iso_a0: [1189, 841],
+  iso_a1: [841, 594],
+  iso_a2: [594, 420],
+  iso_a3: [420, 297],
+  iso_a4: [297, 210],
+  ansi_a: [279.4, 215.9],
+  ansi_b: [431.8, 279.4],
+  ansi_c: [558.8, 431.8],
+  ansi_d: [863.6, 558.8],
+  ansi_e: [1117.6, 863.6]
+};
+var drawing_page_size = z239.enum([
+  "iso_a0",
+  "iso_a1",
+  "iso_a2",
+  "iso_a3",
+  "iso_a4",
+  "ansi_a",
+  "ansi_b",
+  "ansi_c",
+  "ansi_d",
+  "ansi_e"
+]);
+function getDrawingPageDimensions(size2, orientation = "landscape") {
+  const [width, height] = drawingPageSizes[size2];
+  return orientation === "portrait" ? { width: height, height: width } : { width, height };
+}
+
+// src/drawing/drawing_page.ts
+var drawing_page = z240.object({
+  type: z240.literal("drawing_page"),
+  drawing_page_id: z240.string().min(1),
+  name: z240.string().optional(),
+  display_name: z240.string().optional(),
+  page_size: drawing_page_size.optional(),
+  orientation: z240.enum(["landscape", "portrait"]).optional(),
+  width: z240.number().finite().positive(),
+  height: z240.number().finite().positive()
+}).superRefine((page, ctx) => {
+  if (!page.page_size) {
+    if (page.orientation)
+      ctx.addIssue({
+        code: "custom",
+        path: ["orientation"],
+        message: "Orientation requires page_size; custom pages use explicit dimensions"
+      });
+    return;
+  }
+  const expected = getDrawingPageDimensions(page.page_size, page.orientation);
+  if (Math.abs(page.width - expected.width) > 1e-6 || Math.abs(page.height - expected.height) > 1e-6)
+    ctx.addIssue({
+      code: "custom",
+      path: ["page_size"],
+      message: "Dimensions must match the named sheet size and orientation"
+    });
+}).describe(
+  "A paper-space drawing page containing configured part views. Dimensions are mm."
+);
+expectTypesMatch(true);
+
+// src/drawing/drawing_part_view.ts
+import { z as z241 } from "zod";
+var drawing_part_view_direction = z241.enum([
+  "x_positive",
+  "x_negative",
+  "y_positive",
+  "y_negative",
+  "z_positive",
+  "z_negative",
+  "isometric"
+]);
+var drawing_section_plane = z241.object({
+  axis: z241.enum(["x", "y", "z"]),
+  offset: z241.number().finite(),
+  keep_side: z241.enum(["less", "greater"]),
+  hatch_spacing: z241.number().finite().positive().optional()
+});
+var drawing_part_view = z241.object({
+  type: z241.literal("drawing_part_view"),
+  drawing_part_view_id: z241.string().min(1),
+  drawing_page_id: z241.string().min(1),
+  source_group_id: z241.string().min(1).optional(),
+  source_component_ids: z241.array(z241.string().min(1)).optional(),
+  name: z241.string().optional(),
+  display_name: z241.string().optional(),
+  direction: drawing_part_view_direction,
+  center: z241.object({ x: z241.number().finite(), y: z241.number().finite() }),
+  width: z241.number().finite().positive(),
+  height: z241.number().finite().positive(),
+  scale: z241.number().finite().positive().optional(),
+  show_hidden_edges: z241.boolean().optional(),
+  section: drawing_section_plane.optional()
+}).describe(
+  "A configured orthographic view of selected assembly geometry. Paper coordinates are mm, origin at sheet center, +X right/+Y up. Directions and section planes use CAD world coordinates in mm with +Z up."
+);
+expectTypesMatch(
+  true
+);
+expectTypesMatch(true);
+
+// src/drawing/drawing_page_title_block.ts
+import { z as z242 } from "zod";
+var drawing_page_title_block = z242.object({
+  type: z242.literal("drawing_page_title_block"),
+  drawing_page_title_block_id: z242.string().min(1),
+  drawing_page_id: z242.string().min(1),
+  title: z242.string().min(1),
+  legal_owner: z242.string().optional(),
+  identification_number: z242.string().optional(),
+  revision_index: z242.string().optional(),
+  date_of_issue: z242.string().optional(),
+  creator: z242.string().optional(),
+  approval_person: z242.string().optional(),
+  sheet_number: z242.number().int().positive().optional(),
+  number_of_sheets: z242.number().int().positive().optional()
+}).refine(
+  (block) => block.sheet_number == null || block.number_of_sheets == null || block.sheet_number <= block.number_of_sheets,
+  {
+    message: "sheet_number must not exceed number_of_sheets",
+    path: ["sheet_number"]
+  }
+);
+expectTypesMatch(true);
+
+// src/any_circuit_element.ts
+var any_circuit_element = z243.union([
+  drawing_page,
+  drawing_page_title_block,
+  drawing_part_view,
   source_runtime_error,
   source_datasheet,
   source_trace,
@@ -5816,6 +6001,7 @@ var any_circuit_element = z238.union([
   pcb_solder_paste,
   pcb_soldermask_opening,
   pcb_board,
+  pcb_stackup,
   pcb_bend,
   pcb_stiffener,
   pcb_panel,
@@ -5954,10 +6140,18 @@ export {
   circuit_json_footprint_load_error,
   current,
   distance,
+  drawingPageSizes,
+  drawing_page,
+  drawing_page_size,
+  drawing_page_title_block,
+  drawing_part_view,
+  drawing_part_view_direction,
+  drawing_section_plane,
   duration_ms,
   experiment_type,
   external_footprint_load_error,
   frequency,
+  getDrawingPageDimensions,
   getRotationBetweenPcbPin1Locations,
   getSimulationReturnCurrentGridJsonSchema,
   getZodPrefixedIdWithDefault,
@@ -6076,6 +6270,11 @@ export {
   pcb_smtpad_pill,
   pcb_solder_paste,
   pcb_soldermask_opening,
+  pcb_stackup,
+  pcb_stackup_copper_layer,
+  pcb_stackup_dielectric_layer,
+  pcb_stackup_layer,
+  pcb_stackup_soldermask_layer,
   pcb_stiffener,
   pcb_stiffener_polygon,
   pcb_stiffener_rect,