circuit-json 0.0.520 → 0.0.521

package/dist/index.mjs

@@ -1754,36 +1754,53 @@ var schematic_component_styling_warning = z100.object({
 );
 expectTypesMatch(true);
 
-// src/schematic/schematic_element_outside_sheet_warning.ts
+// src/schematic/schematic_sheet_styling_warning.ts
 import { z as z101 } from "zod";
-var schematic_element_outside_sheet_warning = z101.object({
-  type: z101.literal("schematic_element_outside_sheet_warning"),
-  schematic_element_outside_sheet_warning_id: getZodPrefixedIdWithDefault(
-    "schematic_element_outside_sheet_warning"
+var schematic_sheet_styling_warning = z101.object({
+  type: z101.literal("schematic_sheet_styling_warning"),
+  schematic_sheet_styling_warning_id: getZodPrefixedIdWithDefault(
+    "schematic_sheet_styling_warning"
   ),
-  warning_type: z101.literal("schematic_element_outside_sheet_warning").default("schematic_element_outside_sheet_warning"),
+  warning_type: z101.literal("schematic_sheet_styling_warning").default("schematic_sheet_styling_warning"),
   message: z101.string(),
   schematic_sheet_id: z101.string(),
-  schematic_element_type: z101.enum([
+  styling_issue_type: z101.literal("non_default_sheet_size"),
+  subcircuit_id: z101.string().optional()
+}).describe(
+  "Style warning emitted when a schematic sheet uses a non-default size"
+);
+expectTypesMatch(true);
+
+// src/schematic/schematic_element_outside_sheet_warning.ts
+import { z as z102 } from "zod";
+var schematic_element_outside_sheet_warning = z102.object({
+  type: z102.literal("schematic_element_outside_sheet_warning"),
+  schematic_element_outside_sheet_warning_id: getZodPrefixedIdWithDefault(
+    "schematic_element_outside_sheet_warning"
+  ),
+  warning_type: z102.literal("schematic_element_outside_sheet_warning").default("schematic_element_outside_sheet_warning"),
+  message: z102.string(),
+  schematic_sheet_id: z102.string(),
+  schematic_element_type: z102.enum([
     "schematic_component",
     "schematic_net_label",
     "schematic_trace"
   ]),
-  schematic_element_id: z101.string()
+  schematic_element_id: z102.string()
 }).describe(
   "Warning emitted when a schematic component, net label, or trace extends outside its schematic sheet"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_graphic.ts
-import { z as z102 } from "zod";
-var positiveFiniteDistance = distance.pipe(z102.number().positive().finite());
-var schematic_graphic = z102.object({
-  type: z102.literal("schematic_graphic"),
+import { z as z103 } from "zod";
+var positiveFiniteDistance = distance.pipe(z103.number().positive().finite());
+var schematic_graphic = z103.object({
+  type: z103.literal("schematic_graphic"),
   schematic_graphic_id: getZodPrefixedIdWithDefault("schematic_graphic"),
-  schematic_sheet_id: z102.string().optional(),
+  schematic_sheet_id: z103.string().optional(),
   asset: asset.optional(),
-  svg_content: z102.string().optional(),
+  svg_content: z103.string().optional(),
   width: positiveFiniteDistance.optional(),
   height: positiveFiniteDistance.optional()
 }).describe(
@@ -1791,7 +1808,7 @@ var schematic_graphic = z102.object({
 ).superRefine(({ asset: asset2, svg_content }, ctx) => {
   if (asset2 === void 0 && svg_content === void 0) {
     ctx.addIssue({
-      code: z102.ZodIssueCode.custom,
+      code: z103.ZodIssueCode.custom,
       message: "At least one of asset or svg_content is required"
     });
   }
@@ -1799,117 +1816,117 @@ var schematic_graphic = z102.object({
 expectTypesMatch(true);
 
 // src/schematic/schematic_group.ts
-import { z as z103 } from "zod";
-var schematic_group = z103.object({
-  type: z103.literal("schematic_group"),
+import { z as z104 } from "zod";
+var schematic_group = z104.object({
+  type: z104.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  schematic_sheet_id: z103.string().optional(),
-  source_group_id: z103.string(),
-  is_subcircuit: z103.boolean().optional(),
-  subcircuit_id: z103.string().optional(),
+  schematic_sheet_id: z104.string().optional(),
+  source_group_id: z104.string(),
+  is_subcircuit: z104.boolean().optional(),
+  subcircuit_id: z104.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z103.array(z103.string()),
-  show_as_schematic_box: z103.boolean().optional(),
-  name: z103.string().optional(),
-  description: z103.string().optional()
+  schematic_component_ids: z104.array(z104.string()),
+  show_as_schematic_box: z104.boolean().optional(),
+  name: z104.string().optional(),
+  description: z104.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table.ts
-import { z as z104 } from "zod";
-var schematic_table = z104.object({
-  type: z104.literal("schematic_table"),
+import { z as z105 } from "zod";
+var schematic_table = z105.object({
+  type: z105.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
-  schematic_sheet_id: z104.string().optional(),
+  schematic_sheet_id: z105.string().optional(),
   anchor_position: point,
-  column_widths: z104.array(distance),
-  row_heights: z104.array(distance),
+  column_widths: z105.array(distance),
+  row_heights: z105.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z104.string().optional(),
-  schematic_component_id: z104.string().optional(),
+  subcircuit_id: z105.string().optional(),
+  schematic_component_id: z105.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table_cell.ts
-import { z as z105 } from "zod";
-var schematic_table_cell = z105.object({
-  type: z105.literal("schematic_table_cell"),
+import { z as z106 } from "zod";
+var schematic_table_cell = z106.object({
+  type: z106.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_sheet_id: z105.string().optional(),
-  schematic_table_id: z105.string(),
-  start_row_index: z105.number(),
-  end_row_index: z105.number(),
-  start_column_index: z105.number(),
-  end_column_index: z105.number(),
-  text: z105.string().optional(),
+  schematic_sheet_id: z106.string().optional(),
+  schematic_table_id: z106.string(),
+  start_row_index: z106.number(),
+  end_row_index: z106.number(),
+  start_column_index: z106.number(),
+  end_column_index: z106.number(),
+  text: z106.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z105.enum(["left", "center", "right"]).optional(),
-  vertical_align: z105.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z106.enum(["left", "center", "right"]).optional(),
+  vertical_align: z106.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z105.string().optional()
+  subcircuit_id: z106.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
 
 // src/schematic/schematic_sheet.ts
-import { z as z106 } from "zod";
-var schematic_sheet_size = z106.enum(["a4", "ansi_b"]);
-var schematic_sheet = z106.object({
-  type: z106.literal("schematic_sheet"),
+import { z as z107 } from "zod";
+var schematic_sheet_size = z107.enum(["a4", "ansi_b"]);
+var schematic_sheet = z107.object({
+  type: z107.literal("schematic_sheet"),
   schematic_sheet_id: getZodPrefixedIdWithDefault("schematic_sheet"),
-  name: z106.string().optional(),
-  sheet_index: z106.number().optional(),
+  name: z107.string().optional(),
+  sheet_index: z107.number().optional(),
   sheet_size: schematic_sheet_size.optional(),
-  sheet_width: z106.number().positive().optional(),
-  sheet_height: z106.number().positive().optional(),
-  subcircuit_id: z106.string().optional(),
-  outline_color: z106.string().optional()
+  sheet_width: z107.number().positive().optional(),
+  sheet_height: z107.number().positive().optional(),
+  subcircuit_id: z107.string().optional(),
+  outline_color: z107.string().optional()
 }).describe(
   "Defines a schematic sheet or page that components can be placed on"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_missing_sheet_warning.ts
-import { z as z107 } from "zod";
-var schematic_missing_sheet_warning = z107.object({
-  type: z107.literal("schematic_missing_sheet_warning"),
+import { z as z108 } from "zod";
+var schematic_missing_sheet_warning = z108.object({
+  type: z108.literal("schematic_missing_sheet_warning"),
   schematic_missing_sheet_warning_id: getZodPrefixedIdWithDefault(
     "schematic_missing_sheet_warning"
   ),
-  warning_type: z107.literal("schematic_missing_sheet_warning").default("schematic_missing_sheet_warning"),
-  message: z107.string()
+  warning_type: z108.literal("schematic_missing_sheet_warning").default("schematic_missing_sheet_warning"),
+  message: z108.string()
 }).describe(
   "Circuit-wide warning emitted when a schematic has no schematic sheet. Display as a banner without attaching it to a component or drawing a target outline or leader line."
 );
 expectTypesMatch(true);
 
 // src/pcb/properties/brep.ts
-import { z as z108 } from "zod";
-var point_with_bulge = z108.object({
+import { z as z109 } from "zod";
+var point_with_bulge = z109.object({
   x: distance,
   y: distance,
-  bulge: z108.number().optional()
+  bulge: z109.number().optional()
 });
 expectTypesMatch(true);
-var ring = z108.object({
-  vertices: z108.array(point_with_bulge)
+var ring = z109.object({
+  vertices: z109.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z108.object({
+var brep_shape = z109.object({
   outer_ring: ring,
-  inner_rings: z108.array(ring).default([])
+  inner_rings: z109.array(ring).default([])
 });
 expectTypesMatch(true);
 
 // src/pcb/properties/insertion_direction.ts
-import { z as z109 } from "zod";
+import { z as z110 } from "zod";
 var insertionDirectionToCanonical = {
   from_left: "from_left",
   from_right: "from_right",
@@ -1936,7 +1953,7 @@ var insertionDirectionToVector = {
   from_above: { x: 0, y: 0, z: 1 },
   from_below: { x: 0, y: 0, z: -1 }
 };
-var insertion_direction = z109.enum([
+var insertion_direction = z110.enum([
   "from_left",
   "from_right",
   "from_top",
@@ -1961,8 +1978,8 @@ expectTypesMatch(
 );
 
 // src/pcb/properties/pcb_pin1_location.ts
-import { z as z110 } from "zod";
-var pcb_pin1_location = z110.enum([
+import { z as z111 } from "zod";
+var pcb_pin1_location = z111.enum([
   "leftside_top",
   "leftside_bottom",
   "rightside_top",
@@ -1999,31 +2016,31 @@ var getRotationBetweenPcbPin1Locations = (from, to) => {
 };
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z111 } from "zod";
-var pcb_route_hint = z111.object({
+import { z as z112 } from "zod";
+var pcb_route_hint = z112.object({
   x: distance,
   y: distance,
-  via: z111.boolean().optional(),
+  via: z112.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z111.array(pcb_route_hint);
+var pcb_route_hints = z112.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z112 } from "zod";
-var route_hint_point = z112.object({
+import { z as z113 } from "zod";
+var route_hint_point = z113.object({
   x: distance,
   y: distance,
-  via: z112.boolean().optional(),
+  via: z113.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/properties/manufacturing_drc_properties.ts
-import { z as z113 } from "zod";
-var manufacturing_drc_properties = z113.object({
+import { z as z114 } from "zod";
+var manufacturing_drc_properties = z114.object({
   min_trace_width: length.optional(),
   min_board_edge_clearance: length.optional(),
   min_via_hole_edge_to_via_hole_edge_clearance: length.optional(),
@@ -2041,27 +2058,27 @@ var manufacturing_drc_properties = z113.object({
 });
 
 // src/pcb/pcb_component.ts
-import { z as z114 } from "zod";
-var pcb_component = z114.object({
-  type: z114.literal("pcb_component"),
+import { z as z115 } from "zod";
+var pcb_component = z115.object({
+  type: z115.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z114.string(),
+  source_component_id: z115.string(),
   center: point,
   layer: layer_ref,
   rotation,
-  display_offset_x: z114.string().optional().describe(
+  display_offset_x: z115.string().optional().describe(
     "How to display the x offset for this part, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z114.string().optional().describe(
+  display_offset_y: z115.string().optional().describe(
     "How to display the y offset for this part, usually corresponding with how the user specified it"
   ),
   width: length,
   height: length,
-  do_not_place: z114.boolean().optional(),
-  is_allowed_to_be_off_board: z114.boolean().optional(),
-  subcircuit_id: z114.string().optional(),
-  pcb_group_id: z114.string().optional(),
-  position_mode: z114.enum([
+  do_not_place: z115.boolean().optional(),
+  is_allowed_to_be_off_board: z115.boolean().optional(),
+  subcircuit_id: z115.string().optional(),
+  pcb_group_id: z115.string().optional(),
+  position_mode: z115.enum([
     "packed",
     "relative_to_group_anchor",
     "relative_to_another_component",
@@ -2069,48 +2086,48 @@ var pcb_component = z114.object({
   ]).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  positioned_relative_to_pcb_group_id: z114.string().optional(),
-  positioned_relative_to_pcb_board_id: z114.string().optional(),
+  positioned_relative_to_pcb_group_id: z115.string().optional(),
+  positioned_relative_to_pcb_board_id: z115.string().optional(),
   cable_insertion_center: point.optional(),
   insertion_direction: insertion_direction.optional(),
   pin1_location: pcb_pin1_location.optional().describe(
     "Location of pin 1 on the unrotated, top-view component footprint"
   ),
-  supplier_pin1_location_map: z114.record(supplier_name, pcb_pin1_location).optional().describe(
+  supplier_pin1_location_map: z115.record(supplier_name, pcb_pin1_location).optional().describe(
     "Pin 1 location for each supplier's unrotated, top-view footprint"
   ),
-  metadata: z114.object({
+  metadata: z115.object({
     kicad_footprint: kicadFootprintMetadata.optional()
   }).optional(),
-  obstructs_within_bounds: z114.boolean().default(true).describe(
+  obstructs_within_bounds: z115.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_debug_object.ts
-import { z as z115 } from "zod";
-var pcb_debug_object_base = z115.object({
-  type: z115.literal("pcb_debug_object"),
+import { z as z116 } from "zod";
+var pcb_debug_object_base = z116.object({
+  type: z116.literal("pcb_debug_object"),
   pcb_debug_object_id: getZodPrefixedIdWithDefault("pcb_debug_object"),
-  label: z115.string().optional(),
-  subcircuit_id: z115.string().optional()
+  label: z116.string().optional(),
+  subcircuit_id: z116.string().optional()
 });
 var pcb_debug_rect = pcb_debug_object_base.extend({
-  shape: z115.literal("rect"),
+  shape: z116.literal("rect"),
   center: point,
   size
 });
 var pcb_debug_line = pcb_debug_object_base.extend({
-  shape: z115.literal("line"),
+  shape: z116.literal("line"),
   start: point,
   end: point
 });
 var pcb_debug_point = pcb_debug_object_base.extend({
-  shape: z115.literal("point"),
+  shape: z116.literal("point"),
   center: point
 });
-var pcb_debug_object = z115.discriminatedUnion("shape", [
+var pcb_debug_object = z116.discriminatedUnion("shape", [
   pcb_debug_rect,
   pcb_debug_line,
   pcb_debug_point
@@ -2118,109 +2135,109 @@ var pcb_debug_object = z115.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z116 } from "zod";
-var pcb_hole_circle = z116.object({
-  type: z116.literal("pcb_hole"),
+import { z as z117 } from "zod";
+var pcb_hole_circle = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.literal("circle"),
-  hole_diameter: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.literal("circle"),
+  hole_diameter: z117.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_circle_shape = pcb_hole_circle.describe(
   "Defines a circular hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rect = z116.object({
-  type: z116.literal("pcb_hole"),
+var pcb_hole_rect = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.literal("rect"),
-  hole_width: z116.number(),
-  hole_height: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.literal("rect"),
+  hole_width: z117.number(),
+  hole_height: z117.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_rect_shape = pcb_hole_rect.describe(
   "Defines a rectangular (square-capable) hole on the PCB. Use equal width/height for square."
 );
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z116.object({
-  type: z116.literal("pcb_hole"),
+var pcb_hole_circle_or_square = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.enum(["circle", "square"]),
-  hole_diameter: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.enum(["circle", "square"]),
+  hole_diameter: z117.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z116.object({
-  type: z116.literal("pcb_hole"),
+var pcb_hole_oval = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.literal("oval"),
-  hole_width: z116.number(),
-  hole_height: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.literal("oval"),
+  hole_width: z117.number(),
+  hole_height: z117.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z116.object({
-  type: z116.literal("pcb_hole"),
+var pcb_hole_pill = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.literal("pill"),
-  hole_width: z116.number(),
-  hole_height: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.literal("pill"),
+  hole_width: z117.number(),
+  hole_height: z117.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z116.object({
-  type: z116.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z117.object({
+  type: z117.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
-  pcb_component_id: z116.string().optional(),
-  hole_shape: z116.literal("rotated_pill"),
-  hole_width: z116.number(),
-  hole_height: z116.number(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z117.string().optional(),
+  hole_shape: z117.literal("rotated_pill"),
+  hole_width: z117.number(),
+  hole_height: z117.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  is_covered_with_solder_mask: z116.boolean().optional(),
-  soldermask_margin: z116.number().optional()
+  is_covered_with_solder_mask: z117.boolean().optional(),
+  soldermask_margin: z117.number().optional()
 });
 var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
   "Defines a rotated pill-shaped hole on the PCB"
@@ -2229,147 +2246,147 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill).or(pcb_hole_circle).or(pcb_hole_rect);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z117 } from "zod";
-var pcb_plated_hole_circle = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.literal("circle"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  outer_diameter: z117.number(),
-  hole_diameter: z117.number(),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+import { z as z118 } from "zod";
+var pcb_plated_hole_circle = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.literal("circle"),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  outer_diameter: z118.number(),
+  hole_diameter: z118.number(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional()
+  soldermask_margin: z118.number().optional()
 });
-var pcb_plated_hole_oval = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.enum(["oval", "pill"]),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  outer_width: z117.number(),
-  outer_height: z117.number(),
-  hole_width: z117.number(),
-  hole_height: z117.number(),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+var pcb_plated_hole_oval = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.enum(["oval", "pill"]),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  outer_width: z118.number(),
+  outer_height: z118.number(),
+  hole_width: z118.number(),
+  hole_height: z118.number(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional()
+  soldermask_margin: z118.number().optional()
 });
-var pcb_circular_hole_with_rect_pad = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  hole_shape: z117.literal("circle"),
-  pad_shape: z117.literal("rect"),
-  hole_diameter: z117.number(),
-  rect_pad_width: z117.number(),
-  rect_pad_height: z117.number(),
-  rect_border_radius: z117.number().optional(),
+var pcb_circular_hole_with_rect_pad = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  hole_shape: z118.literal("circle"),
+  pad_shape: z118.literal("rect"),
+  hole_diameter: z118.number(),
+  rect_pad_width: z118.number(),
+  rect_pad_height: z118.number(),
+  rect_border_radius: z118.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional(),
+  soldermask_margin: z118.number().optional(),
   rect_ccw_rotation: rotation.optional()
 });
-var pcb_pill_hole_with_rect_pad = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  hole_shape: z117.literal("pill"),
-  pad_shape: z117.literal("rect"),
-  hole_width: z117.number(),
-  hole_height: z117.number(),
-  rect_pad_width: z117.number(),
-  rect_pad_height: z117.number(),
-  rect_border_radius: z117.number().optional(),
+var pcb_pill_hole_with_rect_pad = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  hole_shape: z118.literal("pill"),
+  pad_shape: z118.literal("rect"),
+  hole_width: z118.number(),
+  hole_height: z118.number(),
+  rect_pad_width: z118.number(),
+  rect_pad_height: z118.number(),
+  rect_border_radius: z118.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional()
+  soldermask_margin: z118.number().optional()
 });
-var pcb_rotated_pill_hole_with_rect_pad = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  hole_shape: z117.literal("rotated_pill"),
-  pad_shape: z117.literal("rect"),
-  hole_width: z117.number(),
-  hole_height: z117.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  hole_shape: z118.literal("rotated_pill"),
+  pad_shape: z118.literal("rect"),
+  hole_width: z118.number(),
+  hole_height: z118.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z117.number(),
-  rect_pad_height: z117.number(),
-  rect_border_radius: z117.number().optional(),
+  rect_pad_width: z118.number(),
+  rect_pad_height: z118.number(),
+  rect_border_radius: z118.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional()
+  soldermask_margin: z118.number().optional()
 });
-var pcb_hole_with_polygon_pad = z117.object({
-  type: z117.literal("pcb_plated_hole"),
-  shape: z117.literal("hole_with_polygon_pad"),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  hole_shape: z117.enum(["circle", "oval", "pill", "rotated_pill"]),
-  hole_diameter: z117.number().optional(),
-  hole_width: z117.number().optional(),
-  hole_height: z117.number().optional(),
-  pad_outline: z117.array(
-    z117.object({
+var pcb_hole_with_polygon_pad = z118.object({
+  type: z118.literal("pcb_plated_hole"),
+  shape: z118.literal("hole_with_polygon_pad"),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  hole_shape: z118.enum(["circle", "oval", "pill", "rotated_pill"]),
+  hole_diameter: z118.number().optional(),
+  hole_width: z118.number().optional(),
+  hole_height: z118.number().optional(),
+  pad_outline: z118.array(
+    z118.object({
       x: distance,
       y: distance
     })
   ).min(3),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z117.boolean().optional(),
+  is_covered_with_solder_mask: z118.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z117.array(layer_ref),
-  port_hints: z117.array(z117.string()).optional(),
-  pcb_component_id: z117.string().optional(),
-  pcb_port_id: z117.string().optional(),
+  layers: z118.array(layer_ref),
+  port_hints: z118.array(z118.string()).optional(),
+  pcb_component_id: z118.string().optional(),
+  pcb_port_id: z118.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z117.number().optional(),
+  soldermask_margin: z118.number().optional(),
   ccw_rotation: rotation.optional()
 });
-var pcb_plated_hole = z117.union([
+var pcb_plated_hole = z118.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -2387,144 +2404,144 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z118 } from "zod";
-var pcb_port = z118.object({
-  type: z118.literal("pcb_port"),
+import { z as z119 } from "zod";
+var pcb_port = z119.object({
+  type: z119.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z118.string().optional(),
-  subcircuit_id: z118.string().optional(),
-  source_port_id: z118.string(),
-  pcb_component_id: z118.string().optional(),
+  pcb_group_id: z119.string().optional(),
+  subcircuit_id: z119.string().optional(),
+  source_port_id: z119.string(),
+  pcb_component_id: z119.string().optional(),
   x: distance,
   y: distance,
-  layers: z118.array(layer_ref),
-  is_board_pinout: z118.boolean().optional()
+  layers: z119.array(layer_ref),
+  is_board_pinout: z119.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z119 } from "zod";
-var pcb_smtpad_circle = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("circle"),
+import { z as z120 } from "zod";
+var pcb_smtpad_circle = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   x: distance,
   y: distance,
-  radius: z119.number(),
+  radius: z120.number(),
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
-});
-var pcb_smtpad_rect = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("rect"),
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
+});
+var pcb_smtpad_rect = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   x: distance,
   y: distance,
-  width: z119.number(),
-  height: z119.number(),
-  rect_border_radius: z119.number().optional(),
-  corner_radius: z119.number().optional(),
+  width: z120.number(),
+  height: z120.number(),
+  rect_border_radius: z120.number().optional(),
+  corner_radius: z120.number().optional(),
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  soldermask_margin_left: z119.number().optional(),
-  soldermask_margin_top: z119.number().optional(),
-  soldermask_margin_right: z119.number().optional(),
-  soldermask_margin_bottom: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
-});
-var pcb_smtpad_rotated_rect = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("rotated_rect"),
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  soldermask_margin_left: z120.number().optional(),
+  soldermask_margin_top: z120.number().optional(),
+  soldermask_margin_right: z120.number().optional(),
+  soldermask_margin_bottom: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
+});
+var pcb_smtpad_rotated_rect = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   x: distance,
   y: distance,
-  width: z119.number(),
-  height: z119.number(),
-  rect_border_radius: z119.number().optional(),
-  corner_radius: z119.number().optional(),
+  width: z120.number(),
+  height: z120.number(),
+  rect_border_radius: z120.number().optional(),
+  corner_radius: z120.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  soldermask_margin_left: z119.number().optional(),
-  soldermask_margin_top: z119.number().optional(),
-  soldermask_margin_right: z119.number().optional(),
-  soldermask_margin_bottom: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
-});
-var pcb_smtpad_pill = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("pill"),
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  soldermask_margin_left: z120.number().optional(),
+  soldermask_margin_top: z120.number().optional(),
+  soldermask_margin_right: z120.number().optional(),
+  soldermask_margin_bottom: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
+});
+var pcb_smtpad_pill = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   x: distance,
   y: distance,
-  width: z119.number(),
-  height: z119.number(),
-  radius: z119.number(),
+  width: z120.number(),
+  height: z120.number(),
+  radius: z120.number(),
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
-});
-var pcb_smtpad_rotated_pill = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("rotated_pill"),
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
+});
+var pcb_smtpad_rotated_pill = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   x: distance,
   y: distance,
-  width: z119.number(),
-  height: z119.number(),
-  radius: z119.number(),
+  width: z120.number(),
+  height: z120.number(),
+  radius: z120.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
-});
-var pcb_smtpad_polygon = z119.object({
-  type: z119.literal("pcb_smtpad"),
-  shape: z119.literal("polygon"),
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
+});
+var pcb_smtpad_polygon = z120.object({
+  type: z120.literal("pcb_smtpad"),
+  shape: z120.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
-  points: z119.array(point),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
+  points: z120.array(point),
   layer: layer_ref,
-  port_hints: z119.array(z119.string()).optional(),
-  pcb_component_id: z119.string().optional(),
-  pcb_port_id: z119.string().optional(),
-  is_covered_with_solder_mask: z119.boolean().optional(),
-  soldermask_margin: z119.number().optional(),
-  solderpaste_margin: z119.number().optional()
+  port_hints: z120.array(z120.string()).optional(),
+  pcb_component_id: z120.string().optional(),
+  pcb_port_id: z120.string().optional(),
+  is_covered_with_solder_mask: z120.boolean().optional(),
+  soldermask_margin: z120.number().optional(),
+  solderpaste_margin: z120.number().optional()
 });
-var pcb_smtpad = z119.discriminatedUnion("shape", [
+var pcb_smtpad = z120.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -2540,105 +2557,105 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z120 } from "zod";
-var pcb_solder_paste_circle = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("circle"),
+import { z as z121 } from "zod";
+var pcb_solder_paste_circle = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  radius: z120.number(),
+  radius: z121.number(),
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste_rect = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("rect"),
+var pcb_solder_paste_rect = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  width: z120.number(),
-  height: z120.number(),
+  width: z121.number(),
+  height: z121.number(),
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste_pill = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("pill"),
+var pcb_solder_paste_pill = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  width: z120.number(),
-  height: z120.number(),
-  radius: z120.number(),
+  width: z121.number(),
+  height: z121.number(),
+  radius: z121.number(),
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  width: z120.number(),
-  height: z120.number(),
+  width: z121.number(),
+  height: z121.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste_rotated_pill = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("rotated_pill"),
+var pcb_solder_paste_rotated_pill = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("rotated_pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  width: z120.number(),
-  height: z120.number(),
-  radius: z120.number(),
+  width: z121.number(),
+  height: z121.number(),
+  radius: z121.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste_oval = z120.object({
-  type: z120.literal("pcb_solder_paste"),
-  shape: z120.literal("oval"),
+var pcb_solder_paste_oval = z121.object({
+  type: z121.literal("pcb_solder_paste"),
+  shape: z121.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   x: distance,
   y: distance,
-  width: z120.number(),
-  height: z120.number(),
+  width: z121.number(),
+  height: z121.number(),
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
 var pcb_solder_paste_polygon = polygon_shape.extend({
-  type: z120.literal("pcb_solder_paste"),
+  type: z121.literal("pcb_solder_paste"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
-  holes: z120.array(polygon_shape.shape.points).optional(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
+  holes: z121.array(polygon_shape.shape.points).optional(),
   layer: layer_ref,
-  pcb_component_id: z120.string().optional(),
-  pcb_smtpad_id: z120.string().optional()
+  pcb_component_id: z121.string().optional(),
+  pcb_smtpad_id: z121.string().optional()
 });
-var pcb_solder_paste = z120.union([
+var pcb_solder_paste = z121.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -2660,18 +2677,18 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_soldermask_opening.ts
-import { z as z121 } from "zod";
-var opening_base = z121.object({
-  type: z121.literal("pcb_soldermask_opening"),
+import { z as z122 } from "zod";
+var opening_base = z122.object({
+  type: z122.literal("pcb_soldermask_opening"),
   pcb_soldermask_opening_id: getZodPrefixedIdWithDefault(
     "pcb_soldermask_opening"
   ),
   layer: layer_ref.pipe(visible_layer),
-  pcb_component_id: z121.string().optional(),
-  pcb_group_id: z121.string().optional(),
-  subcircuit_id: z121.string().optional()
+  pcb_component_id: z122.string().optional(),
+  pcb_group_id: z122.string().optional(),
+  subcircuit_id: z122.string().optional()
 });
-var pcb_soldermask_opening = z121.discriminatedUnion("shape", [
+var pcb_soldermask_opening = z122.discriminatedUnion("shape", [
   circle_shape.extend(opening_base.shape),
   rect_shape.extend(opening_base.shape),
   rotated_rect_shape.extend(opening_base.shape),
@@ -2684,38 +2701,38 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_text.ts
-import { z as z122 } from "zod";
-var pcb_text = z122.object({
-  type: z122.literal("pcb_text"),
+import { z as z123 } from "zod";
+var pcb_text = z123.object({
+  type: z123.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
-  text: z122.string(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
+  text: z123.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z122.number(),
+  lines: z123.number(),
   // @ts-ignore
-  align: z122.enum(["bottom-left"])
+  align: z123.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z123 } from "zod";
-var positive_width = distance.pipe(z123.number().finite().positive());
-var pcb_trace_route_point_wire = z123.object({
-  route_type: z123.literal("wire"),
+import { z as z124 } from "zod";
+var positive_width = distance.pipe(z124.number().finite().positive());
+var pcb_trace_route_point_wire = z124.object({
+  route_type: z124.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
   start_width: positive_width.optional(),
   end_width: positive_width.optional(),
-  width_interpolation_mode: z123.enum(["linear", "quadratic"]).optional(),
-  copper_pour_id: z123.string().optional(),
-  is_inside_copper_pour: z123.boolean().optional(),
-  start_pcb_port_id: z123.string().optional(),
-  end_pcb_port_id: z123.string().optional(),
+  width_interpolation_mode: z124.enum(["linear", "quadratic"]).optional(),
+  copper_pour_id: z124.string().optional(),
+  is_inside_copper_pour: z124.boolean().optional(),
+  start_pcb_port_id: z124.string().optional(),
+  end_pcb_port_id: z124.string().optional(),
   layer: layer_ref
 }).superRefine((wire, ctx) => {
   const present = [
@@ -2726,66 +2743,66 @@ var pcb_trace_route_point_wire = z123.object({
   if (present === 0) return;
   if (present !== 3) {
     ctx.addIssue({
-      code: z123.ZodIssueCode.custom,
+      code: z124.ZodIssueCode.custom,
       message: "Wire taper requires start_width, end_width and width_interpolation_mode together"
     });
   }
   if (wire.width !== wire.start_width) {
     ctx.addIssue({
-      code: z123.ZodIssueCode.custom,
+      code: z124.ZodIssueCode.custom,
       path: ["start_width"],
       message: "start_width must equal width"
     });
   }
   if (!Number.isFinite(wire.x) || !Number.isFinite(wire.y)) {
     ctx.addIssue({
-      code: z123.ZodIssueCode.custom,
+      code: z124.ZodIssueCode.custom,
       message: "Tapered wire coordinates must be finite"
     });
   }
 });
-var pcb_trace_route_point_via = z123.object({
-  route_type: z123.literal("via"),
+var pcb_trace_route_point_via = z124.object({
+  route_type: z124.literal("via"),
   x: distance,
   y: distance,
-  copper_pour_id: z123.string().optional(),
-  is_inside_copper_pour: z123.boolean().optional(),
+  copper_pour_id: z124.string().optional(),
+  is_inside_copper_pour: z124.boolean().optional(),
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  tented_on_top: z123.boolean().optional(),
-  tented_on_bottom: z123.boolean().optional(),
+  tented_on_top: z124.boolean().optional(),
+  tented_on_bottom: z124.boolean().optional(),
   from_layer: layer_ref,
   to_layer: layer_ref
 });
-var pcb_trace_route_point_through_pad = z123.object({
-  route_type: z123.literal("through_pad"),
+var pcb_trace_route_point_through_pad = z124.object({
+  route_type: z124.literal("through_pad"),
   start: point,
   end: point,
   width: distance,
   start_layer: layer_ref,
   end_layer: layer_ref,
-  pcb_smtpad_id: z123.string().optional(),
-  pcb_plated_hole_id: z123.string().optional()
+  pcb_smtpad_id: z124.string().optional(),
+  pcb_plated_hole_id: z124.string().optional()
 });
-var pcb_trace_route_point = z123.union([
+var pcb_trace_route_point = z124.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via,
   pcb_trace_route_point_through_pad
 ]);
-var pcb_trace = z123.object({
-  type: z123.literal("pcb_trace"),
-  source_trace_id: z123.string().optional(),
-  pcb_component_id: z123.string().optional(),
+var pcb_trace = z124.object({
+  type: z124.literal("pcb_trace"),
+  source_trace_id: z124.string().optional(),
+  pcb_component_id: z124.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z123.string().optional(),
-  subcircuit_id: z123.string().optional(),
-  route_thickness_mode: z123.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z123.number().optional(),
-  should_round_corners: z123.boolean().optional(),
-  trace_length: z123.number().optional(),
-  is_antenna_trace: z123.boolean().optional(),
-  highlight_color: z123.string().optional(),
-  route: z123.array(pcb_trace_route_point).superRefine((route, ctx) => {
+  pcb_group_id: z124.string().optional(),
+  subcircuit_id: z124.string().optional(),
+  route_thickness_mode: z124.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z124.number().optional(),
+  should_round_corners: z124.boolean().optional(),
+  trace_length: z124.number().optional(),
+  is_antenna_trace: z124.boolean().optional(),
+  highlight_color: z124.string().optional(),
+  route: z124.array(pcb_trace_route_point).superRefine((route, ctx) => {
     for (const [i, wire] of route.entries()) {
       if (wire.route_type !== "wire" || wire.width_interpolation_mode === void 0)
         continue;
@@ -2795,7 +2812,7 @@ var pcb_trace = z123.object({
       const length4 = end ? Math.hypot(end.x - wire.x, end.y - wire.y) : NaN;
       if (!Number.isFinite(length4) || length4 <= 0 || layer !== wire.layer) {
         ctx.addIssue({
-          code: z123.ZodIssueCode.custom,
+          code: z124.ZodIssueCode.custom,
           path: [i],
           message: "Tapered wire must lead to a distinct finite next point on the same layer"
         });
@@ -2807,164 +2824,164 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_warning.ts
-import { z as z124 } from "zod";
-var pcb_trace_warning = z124.object({
-  type: z124.literal("pcb_trace_warning"),
+import { z as z125 } from "zod";
+var pcb_trace_warning = z125.object({
+  type: z125.literal("pcb_trace_warning"),
   pcb_trace_warning_id: getZodPrefixedIdWithDefault("pcb_trace_warning"),
-  warning_type: z124.literal("pcb_trace_warning").default("pcb_trace_warning"),
-  message: z124.string(),
+  warning_type: z125.literal("pcb_trace_warning").default("pcb_trace_warning"),
+  message: z125.string(),
   center: point.optional(),
-  pcb_trace_id: z124.string(),
-  source_trace_id: z124.string(),
-  pcb_component_ids: z124.array(z124.string()),
-  pcb_port_ids: z124.array(z124.string()),
-  subcircuit_id: z124.string().optional()
+  pcb_trace_id: z125.string(),
+  source_trace_id: z125.string(),
+  pcb_component_ids: z125.array(z125.string()),
+  pcb_port_ids: z125.array(z125.string()),
+  subcircuit_id: z125.string().optional()
 }).describe("Defines a trace warning on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_too_long_error.ts
-import { z as z125 } from "zod";
-var pcb_trace_too_long_error = z125.object({
-  type: z125.literal("pcb_trace_too_long_error"),
+import { z as z126 } from "zod";
+var pcb_trace_too_long_error = z126.object({
+  type: z126.literal("pcb_trace_too_long_error"),
   pcb_trace_too_long_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_too_long_error"
   ),
-  error_type: z125.literal("pcb_trace_too_long_error").default("pcb_trace_too_long_error"),
-  message: z125.string(),
-  pcb_trace_id: z125.string(),
-  source_net_id: z125.string().optional(),
-  source_trace_id: z125.string().optional(),
+  error_type: z126.literal("pcb_trace_too_long_error").default("pcb_trace_too_long_error"),
+  message: z126.string(),
+  pcb_trace_id: z126.string(),
+  source_net_id: z126.string().optional(),
+  source_trace_id: z126.string().optional(),
   actual_trace_length: distance,
   maximum_trace_length: distance,
-  subcircuit_id: z125.string().optional()
+  subcircuit_id: z126.string().optional()
 }).describe(
   "Error emitted when a PCB trace is longer than its maximum allowed length"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_bus_length_skew_error.ts
-import { z as z126 } from "zod";
+import { z as z127 } from "zod";
 var pcb_bus_length_skew_error = base_circuit_json_error.extend({
-  type: z126.literal("pcb_bus_length_skew_error"),
+  type: z127.literal("pcb_bus_length_skew_error"),
   pcb_bus_length_skew_error_id: getZodPrefixedIdWithDefault(
     "pcb_bus_length_skew_error"
   ),
-  error_type: z126.literal("pcb_bus_length_skew_error").default("pcb_bus_length_skew_error"),
-  source_bus_id: z126.string(),
-  source_trace_ids: z126.array(z126.string()),
-  pcb_trace_ids: z126.array(z126.string()),
-  actual_length_skew: z126.number().nonnegative().finite(),
-  maximum_length_skew: z126.number().nonnegative().finite(),
-  subcircuit_id: z126.string().optional()
+  error_type: z127.literal("pcb_bus_length_skew_error").default("pcb_bus_length_skew_error"),
+  source_bus_id: z127.string(),
+  source_trace_ids: z127.array(z127.string()),
+  pcb_trace_ids: z127.array(z127.string()),
+  actual_length_skew: z127.number().nonnegative().finite(),
+  maximum_length_skew: z127.number().nonnegative().finite(),
+  subcircuit_id: z127.string().optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_too_long_warning.ts
-import { z as z127 } from "zod";
-var pcb_trace_too_long_warning = z127.object({
-  type: z127.literal("pcb_trace_too_long_warning"),
+import { z as z128 } from "zod";
+var pcb_trace_too_long_warning = z128.object({
+  type: z128.literal("pcb_trace_too_long_warning"),
   pcb_trace_too_long_warning_id: getZodPrefixedIdWithDefault(
     "pcb_trace_too_long_warning"
   ),
-  warning_type: z127.literal("pcb_trace_too_long_warning").default("pcb_trace_too_long_warning"),
-  message: z127.string(),
-  pcb_trace_id: z127.string(),
-  source_net_id: z127.string().optional(),
-  source_trace_id: z127.string().optional(),
+  warning_type: z128.literal("pcb_trace_too_long_warning").default("pcb_trace_too_long_warning"),
+  message: z128.string(),
+  pcb_trace_id: z128.string(),
+  source_net_id: z128.string().optional(),
+  source_trace_id: z128.string().optional(),
   actual_trace_length: distance,
   maximum_trace_length: distance,
-  subcircuit_id: z127.string().optional()
+  subcircuit_id: z128.string().optional()
 }).describe(
   "Warning emitted when a PCB trace is longer than its maximum allowed length"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_too_many_vias_warning.ts
-import { z as z128 } from "zod";
-var pcb_trace_too_many_vias_warning = z128.object({
-  type: z128.literal("pcb_trace_too_many_vias_warning"),
+import { z as z129 } from "zod";
+var pcb_trace_too_many_vias_warning = z129.object({
+  type: z129.literal("pcb_trace_too_many_vias_warning"),
   pcb_trace_too_many_vias_warning_id: getZodPrefixedIdWithDefault(
     "pcb_trace_too_many_vias_warning"
   ),
-  warning_type: z128.literal("pcb_trace_too_many_vias_warning").default("pcb_trace_too_many_vias_warning"),
-  message: z128.string(),
-  pcb_trace_id: z128.string(),
-  source_net_id: z128.string().optional(),
-  source_trace_id: z128.string().optional(),
-  actual_via_count: z128.number().int().nonnegative(),
-  maximum_via_count: z128.number().int().nonnegative(),
-  subcircuit_id: z128.string().optional()
+  warning_type: z129.literal("pcb_trace_too_many_vias_warning").default("pcb_trace_too_many_vias_warning"),
+  message: z129.string(),
+  pcb_trace_id: z129.string(),
+  source_net_id: z129.string().optional(),
+  source_trace_id: z129.string().optional(),
+  actual_via_count: z129.number().int().nonnegative(),
+  maximum_via_count: z129.number().int().nonnegative(),
+  subcircuit_id: z129.string().optional()
 }).describe(
   "Warning emitted when a PCB trace has more vias than its maximum allowed count"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_bus_routing_constraint_error.ts
-import { z as z129 } from "zod";
+import { z as z130 } from "zod";
 var error_base = base_circuit_json_error.extend({
-  type: z129.literal("pcb_bus_routing_constraint_error"),
+  type: z130.literal("pcb_bus_routing_constraint_error"),
   pcb_bus_routing_constraint_error_id: getZodPrefixedIdWithDefault(
     "pcb_bus_routing_constraint_error"
   ),
-  error_type: z129.literal("pcb_bus_routing_constraint_error").default("pcb_bus_routing_constraint_error"),
-  source_bus_id: z129.string(),
-  source_trace_ids: z129.array(z129.string()).min(1),
-  pcb_trace_ids: z129.array(z129.string()),
-  subcircuit_id: z129.string().optional()
+  error_type: z130.literal("pcb_bus_routing_constraint_error").default("pcb_bus_routing_constraint_error"),
+  source_bus_id: z130.string(),
+  source_trace_ids: z130.array(z130.string()).min(1),
+  pcb_trace_ids: z130.array(z130.string()),
+  subcircuit_id: z130.string().optional()
 });
-var pcb_bus_routing_constraint_error = z129.discriminatedUnion("routing_rule", [
+var pcb_bus_routing_constraint_error = z130.discriminatedUnion("routing_rule", [
   error_base.extend({
-    routing_rule: z129.literal("length_skew"),
-    actual_length_skew: z129.number().nonnegative().finite(),
-    maximum_length_skew: z129.number().nonnegative().finite()
+    routing_rule: z130.literal("length_skew"),
+    actual_length_skew: z130.number().nonnegative().finite(),
+    maximum_length_skew: z130.number().nonnegative().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("min_length"),
-    actual_trace_length: z129.number().nonnegative().finite(),
-    minimum_trace_length: z129.number().finite()
+    routing_rule: z130.literal("min_length"),
+    actual_trace_length: z130.number().nonnegative().finite(),
+    minimum_trace_length: z130.number().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("max_length"),
-    actual_trace_length: z129.number().nonnegative().finite(),
-    maximum_trace_length: z129.number().finite()
+    routing_rule: z130.literal("max_length"),
+    actual_trace_length: z130.number().nonnegative().finite(),
+    maximum_trace_length: z130.number().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("target_length"),
-    actual_trace_length: z129.number().nonnegative().finite(),
-    target_trace_length: z129.number().finite(),
-    length_tolerance: z129.number().nonnegative().finite()
+    routing_rule: z130.literal("target_length"),
+    actual_trace_length: z130.number().nonnegative().finite(),
+    target_trace_length: z130.number().finite(),
+    length_tolerance: z130.number().nonnegative().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("pcb_trace_spacing"),
-    other_pcb_trace_id: z129.string(),
-    other_source_trace_id: z129.string().optional(),
-    actual_centerline_spacing: z129.number().nonnegative().finite(),
-    minimum_centerline_spacing: z129.number().positive().finite()
+    routing_rule: z130.literal("pcb_trace_spacing"),
+    other_pcb_trace_id: z130.string(),
+    other_source_trace_id: z130.string().optional(),
+    actual_centerline_spacing: z130.number().nonnegative().finite(),
+    minimum_centerline_spacing: z130.number().positive().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("pcb_spacing_to_other_signals"),
-    other_pcb_trace_id: z129.string(),
-    other_source_trace_id: z129.string().optional(),
-    actual_centerline_spacing: z129.number().nonnegative().finite(),
-    minimum_centerline_spacing: z129.number().positive().finite()
+    routing_rule: z130.literal("pcb_spacing_to_other_signals"),
+    other_pcb_trace_id: z130.string(),
+    other_source_trace_id: z130.string().optional(),
+    actual_centerline_spacing: z130.number().nonnegative().finite(),
+    minimum_centerline_spacing: z130.number().positive().finite()
   }),
   error_base.extend({
-    routing_rule: z129.literal("impedance_target"),
-    target_impedance: z129.number().positive().finite(),
-    minimum_impedance: z129.number().positive().finite().optional(),
-    maximum_impedance: z129.number().positive().finite().optional()
+    routing_rule: z130.literal("impedance_target"),
+    target_impedance: z130.number().positive().finite(),
+    minimum_impedance: z130.number().positive().finite().optional(),
+    maximum_impedance: z130.number().positive().finite().optional()
   })
 ]).superRefine((error, ctx) => {
   if (error.routing_rule !== "impedance_target") return;
   if (error.minimum_impedance === void 0 && error.maximum_impedance === void 0)
     ctx.addIssue({
-      code: z129.ZodIssueCode.custom,
+      code: z130.ZodIssueCode.custom,
       path: ["minimum_impedance"],
       message: "Provide an impedance bound"
     });
   if (error.minimum_impedance !== void 0 && error.maximum_impedance !== void 0 && error.minimum_impedance > error.maximum_impedance)
     ctx.addIssue({
-      code: z129.ZodIssueCode.custom,
+      code: z130.ZodIssueCode.custom,
       path: ["maximum_impedance"],
       message: "Impedance bounds must be ordered"
     });
@@ -2974,134 +2991,134 @@ var pcb_bus_routing_constraint_error = z129.discriminatedUnion("routing_rule", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_bus_routing_constraint_warning.ts
-import { z as z130 } from "zod";
-var warning_base = z130.object({
-  type: z130.literal("pcb_bus_routing_constraint_warning"),
+import { z as z131 } from "zod";
+var warning_base = z131.object({
+  type: z131.literal("pcb_bus_routing_constraint_warning"),
   pcb_bus_routing_constraint_warning_id: getZodPrefixedIdWithDefault(
     "pcb_bus_routing_constraint_warning"
   ),
-  warning_type: z130.literal("pcb_bus_routing_constraint_warning").default("pcb_bus_routing_constraint_warning"),
-  source_bus_id: z130.string(),
-  source_trace_ids: z130.array(z130.string()).min(1),
-  pcb_trace_ids: z130.array(z130.string()),
-  message: z130.string(),
-  subcircuit_id: z130.string().optional()
+  warning_type: z131.literal("pcb_bus_routing_constraint_warning").default("pcb_bus_routing_constraint_warning"),
+  source_bus_id: z131.string(),
+  source_trace_ids: z131.array(z131.string()).min(1),
+  pcb_trace_ids: z131.array(z131.string()),
+  message: z131.string(),
+  subcircuit_id: z131.string().optional()
 }).describe(
   "A declared bus or pair constraint could not be verified; this is not a pass."
 );
-var pcb_bus_routing_constraint_warning = z130.discriminatedUnion(
+var pcb_bus_routing_constraint_warning = z131.discriminatedUnion(
   "routing_rule",
   [
-    warning_base.extend({ routing_rule: z130.literal("route_geometry") }),
-    warning_base.extend({ routing_rule: z130.literal("reference_geometry") }),
-    warning_base.extend({ routing_rule: z130.literal("spacing_geometry") }),
-    warning_base.extend({ routing_rule: z130.literal("target_length") }),
-    warning_base.extend({ routing_rule: z130.literal("physical_impedance") })
+    warning_base.extend({ routing_rule: z131.literal("route_geometry") }),
+    warning_base.extend({ routing_rule: z131.literal("reference_geometry") }),
+    warning_base.extend({ routing_rule: z131.literal("spacing_geometry") }),
+    warning_base.extend({ routing_rule: z131.literal("target_length") }),
+    warning_base.extend({ routing_rule: z131.literal("physical_impedance") })
   ]
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z131 } from "zod";
+import { z as z132 } from "zod";
 var pcb_trace_error = base_circuit_json_error.extend({
-  type: z131.literal("pcb_trace_error"),
+  type: z132.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z131.literal("pcb_trace_error").default("pcb_trace_error"),
+  error_type: z132.literal("pcb_trace_error").default("pcb_trace_error"),
   center: point.optional(),
-  pcb_trace_id: z131.string(),
-  source_trace_id: z131.string(),
-  pcb_component_ids: z131.array(z131.string()),
-  pcb_port_ids: z131.array(z131.string()),
-  subcircuit_id: z131.string().optional()
+  pcb_trace_id: z132.string(),
+  source_trace_id: z132.string(),
+  pcb_component_ids: z132.array(z132.string()),
+  pcb_port_ids: z132.array(z132.string()),
+  subcircuit_id: z132.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z132 } from "zod";
+import { z as z133 } from "zod";
 var pcb_trace_missing_error = base_circuit_json_error.extend({
-  type: z132.literal("pcb_trace_missing_error"),
+  type: z133.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z132.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  error_type: z133.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
   center: point.optional(),
-  source_trace_id: z132.string(),
-  pcb_component_ids: z132.array(z132.string()),
-  pcb_port_ids: z132.array(z132.string()),
-  subcircuit_id: z132.string().optional()
+  source_trace_id: z133.string(),
+  pcb_component_ids: z133.array(z133.string()),
+  pcb_port_ids: z133.array(z133.string()),
+  subcircuit_id: z133.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z133 } from "zod";
+import { z as z134 } from "zod";
 var pcb_port_not_matched_error = base_circuit_json_error.extend({
-  type: z133.literal("pcb_port_not_matched_error"),
+  type: z134.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z133.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  pcb_component_ids: z133.array(z133.string()),
-  subcircuit_id: z133.string().optional()
+  error_type: z134.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  pcb_component_ids: z134.array(z134.string()),
+  subcircuit_id: z134.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z134 } from "zod";
+import { z as z135 } from "zod";
 var pcb_port_not_connected_error = base_circuit_json_error.extend({
-  type: z134.literal("pcb_port_not_connected_error"),
+  type: z135.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z134.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  pcb_port_ids: z134.array(z134.string()),
-  pcb_component_ids: z134.array(z134.string()),
-  subcircuit_id: z134.string().optional()
+  error_type: z135.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  pcb_port_ids: z135.array(z135.string()),
+  pcb_component_ids: z135.array(z135.string()),
+  subcircuit_id: z135.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_net.ts
-import { z as z135 } from "zod";
-var pcb_net = z135.object({
-  type: z135.literal("pcb_net"),
+import { z as z136 } from "zod";
+var pcb_net = z136.object({
+  type: z136.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z135.string().optional(),
-  highlight_color: z135.string().optional()
+  source_net_id: z136.string().optional(),
+  highlight_color: z136.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z136 } from "zod";
-var pcb_via = z136.object({
-  type: z136.literal("pcb_via"),
+import { z as z137 } from "zod";
+var pcb_via = z137.object({
+  type: z137.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z136.string().optional(),
-  subcircuit_id: z136.string().optional(),
-  subcircuit_connectivity_map_key: z136.string().optional(),
+  pcb_group_id: z137.string().optional(),
+  subcircuit_id: z137.string().optional(),
+  subcircuit_connectivity_map_key: z137.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
   hole_diameter: distance.default("0.25mm"),
   topmost_drill_layer: layer_ref.optional(),
   bottommost_drill_layer: layer_ref.optional(),
-  through_hole: z136.boolean().optional(),
+  through_hole: z137.boolean().optional(),
   /** @deprecated */
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z136.array(layer_ref),
+  layers: z137.array(layer_ref),
   /** PCB ports belonging to this via, including layer ports and aliases. */
-  pcb_port_ids: z136.array(z136.string()).optional(),
-  pcb_trace_id: z136.string().optional(),
-  source_trace_id: z136.string().optional(),
-  source_net_id: z136.string().min(1).optional(),
-  net_is_assignable: z136.boolean().optional(),
-  net_assigned: z136.boolean().optional(),
+  pcb_port_ids: z137.array(z137.string()).optional(),
+  pcb_trace_id: z137.string().optional(),
+  source_trace_id: z137.string().optional(),
+  source_net_id: z137.string().min(1).optional(),
+  net_is_assignable: z137.boolean().optional(),
+  net_assigned: z137.boolean().optional(),
   /** @deprecated Use tented_on_top and tented_on_bottom instead. */
-  is_tented: z136.boolean().optional(),
-  tented_on_top: z136.boolean().optional(),
-  tented_on_bottom: z136.boolean().optional()
+  is_tented: z137.boolean().optional(),
+  tented_on_top: z137.boolean().optional(),
+  tented_on_bottom: z137.boolean().optional()
 }).transform(({ is_tented, ...via }) => {
   if (is_tented !== void 0) {
     via.tented_on_top ??= is_tented;
@@ -3112,62 +3129,62 @@ var pcb_via = z136.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z137 } from "zod";
-var pcb_board = z137.object({
-  type: z137.literal("pcb_board"),
+import { z as z138 } from "zod";
+var pcb_board = z138.object({
+  type: z138.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z137.string().optional(),
-  carrier_pcb_board_id: z137.string().optional(),
-  is_subcircuit: z137.boolean().optional(),
-  subcircuit_id: z137.string().optional(),
-  is_mounted_to_carrier_board: z137.boolean().optional(),
-  is_via_in_pad_allowed: z137.boolean().optional(),
-  default_via_tented_on_top: z137.boolean().optional(),
-  default_via_tented_on_bottom: z137.boolean().optional(),
-  default_via_plugged: z137.boolean().optional(),
+  pcb_panel_id: z138.string().optional(),
+  carrier_pcb_board_id: z138.string().optional(),
+  is_subcircuit: z138.boolean().optional(),
+  subcircuit_id: z138.string().optional(),
+  is_mounted_to_carrier_board: z138.boolean().optional(),
+  is_via_in_pad_allowed: z138.boolean().optional(),
+  default_via_tented_on_top: z138.boolean().optional(),
+  default_via_tented_on_bottom: z138.boolean().optional(),
+  default_via_plugged: z138.boolean().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z137.string().optional().describe(
+  display_offset_x: z138.string().optional().describe(
     "How to display the x offset for this board, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z137.string().optional().describe(
+  display_offset_y: z138.string().optional().describe(
     "How to display the y offset for this board, usually corresponding with how the user specified it"
   ),
   thickness: length.optional().default(1.4),
-  num_layers: z137.number().optional().default(4),
-  allow_blind_and_buried_vias: z137.boolean().optional().describe(
+  num_layers: z138.number().optional().default(4),
+  allow_blind_and_buried_vias: z138.boolean().optional().describe(
     "Whether autorouters may generate blind and buried vias. False restricts newly generated vias to the full board stack."
   ),
-  outline: z137.array(point).optional(),
-  shape: z137.enum(["rect", "polygon"]).optional(),
-  material: z137.enum(["fr4", "fr1", "flex"]).default("fr4"),
-  solder_mask_color: z137.string().optional(),
-  silkscreen_color: z137.string().optional(),
+  outline: z138.array(point).optional(),
+  shape: z138.enum(["rect", "polygon"]).optional(),
+  material: z138.enum(["fr4", "fr1", "flex"]).default("fr4"),
+  solder_mask_color: z138.string().optional(),
+  silkscreen_color: z138.string().optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  position_mode: z137.enum(["relative_to_panel_anchor", "none"]).optional()
+  position_mode: z138.enum(["relative_to_panel_anchor", "none"]).optional()
 }).merge(manufacturing_drc_properties).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_bend.ts
-import { z as z138 } from "zod";
+import { z as z139 } from "zod";
 var finite_point = point.extend({
-  x: length.pipe(z138.number().finite()),
-  y: length.pipe(z138.number().finite())
+  x: length.pipe(z139.number().finite()),
+  y: length.pipe(z139.number().finite())
 });
-var pcb_bend = z138.object({
-  type: z138.literal("pcb_bend"),
+var pcb_bend = z139.object({
+  type: z139.literal("pcb_bend"),
   pcb_bend_id: getZodPrefixedIdWithDefault("pcb_bend"),
-  pcb_board_id: z138.string(),
-  pcb_group_id: z138.string().optional(),
-  subcircuit_id: z138.string().optional(),
-  name: z138.string().optional(),
+  pcb_board_id: z139.string(),
+  pcb_group_id: z139.string().optional(),
+  subcircuit_id: z139.string().optional(),
+  name: z139.string().optional(),
   start: finite_point,
   end: finite_point,
-  bend_angle: rotation.pipe(z138.number().finite()),
-  bend_radius: length.pipe(z138.number().finite().positive()),
-  bend_side: z138.enum(["left", "right"])
+  bend_angle: rotation.pipe(z139.number().finite()),
+  bend_radius: length.pipe(z139.number().finite().positive()),
+  bend_side: z139.enum(["left", "right"])
 }).refine(({ start, end }) => start.x !== end.x || start.y !== end.y, {
   message: "Bend centerline endpoints must be distinct",
   path: ["end"]
@@ -3177,123 +3194,123 @@ var pcb_bend = z138.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_stiffener.ts
-import { z as z139 } from "zod";
-var positive_length = length.pipe(z139.number().finite().positive());
+import { z as z140 } from "zod";
+var positive_length = length.pipe(z140.number().finite().positive());
 var finite_point2 = point.extend({
-  x: length.pipe(z139.number().finite()),
-  y: length.pipe(z139.number().finite())
+  x: length.pipe(z140.number().finite()),
+  y: length.pipe(z140.number().finite())
 });
-var pcb_stiffener_base = z139.object({
-  type: z139.literal("pcb_stiffener"),
+var pcb_stiffener_base = z140.object({
+  type: z140.literal("pcb_stiffener"),
   pcb_stiffener_id: getZodPrefixedIdWithDefault("pcb_stiffener"),
-  pcb_board_id: z139.string(),
-  pcb_group_id: z139.string().optional(),
-  subcircuit_id: z139.string().optional(),
-  name: z139.string().optional(),
-  layer: z139.enum(["top", "bottom"]),
-  material: z139.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
+  pcb_board_id: z140.string(),
+  pcb_group_id: z140.string().optional(),
+  subcircuit_id: z140.string().optional(),
+  name: z140.string().optional(),
+  layer: z140.enum(["top", "bottom"]),
+  material: z140.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
   thickness: positive_length,
-  adhesive_thickness: length.pipe(z139.number().finite().nonnegative()).optional()
+  adhesive_thickness: length.pipe(z140.number().finite().nonnegative()).optional()
 });
 var pcb_stiffener_rect = pcb_stiffener_base.extend({
-  shape: z139.literal("rect"),
+  shape: z140.literal("rect"),
   center: finite_point2,
-  rotation: rotation.pipe(z139.number().finite()).optional(),
+  rotation: rotation.pipe(z140.number().finite()).optional(),
   width: positive_length,
   height: positive_length,
-  outline: z139.never().optional()
+  outline: z140.never().optional()
 });
 expectTypesMatch(true);
 var pcb_stiffener_polygon = pcb_stiffener_base.extend({
-  shape: z139.literal("polygon"),
-  outline: z139.array(finite_point2).min(3).refine((points) => {
+  shape: z140.literal("polygon"),
+  outline: z140.array(finite_point2).min(3).refine((points) => {
     const twice_area = points.reduce((sum, p, i) => {
       const next = points[(i + 1) % points.length];
       return sum + p.x * next.y - next.x * p.y;
     }, 0);
     return Number.isFinite(twice_area) && twice_area !== 0;
   }, "Stiffener outline must enclose a nonzero area"),
-  center: z139.never().optional(),
-  rotation: z139.never().optional(),
-  width: z139.never().optional(),
-  height: z139.never().optional()
+  center: z140.never().optional(),
+  rotation: z140.never().optional(),
+  width: z140.never().optional(),
+  height: z140.never().optional()
 });
 expectTypesMatch(
   true
 );
-var pcb_stiffener = z139.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
+var pcb_stiffener = z140.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
   "Defines bonded mechanical PCB reinforcement without adding copper layers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z140 } from "zod";
-var pcb_panel = z140.object({
-  type: z140.literal("pcb_panel"),
+import { z as z141 } from "zod";
+var pcb_panel = z141.object({
+  type: z141.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  covered_with_solder_mask: z140.boolean().optional().default(true)
+  covered_with_solder_mask: z141.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z141 } from "zod";
+import { z as z142 } from "zod";
 var pcb_placement_error = base_circuit_json_error.extend({
-  type: z141.literal("pcb_placement_error"),
+  type: z142.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z141.literal("pcb_placement_error").default("pcb_placement_error"),
-  subcircuit_id: z141.string().optional()
+  error_type: z142.literal("pcb_placement_error").default("pcb_placement_error"),
+  subcircuit_id: z142.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_packing_error.ts
-import { z as z142 } from "zod";
+import { z as z143 } from "zod";
 var pcb_packing_error = base_circuit_json_error.extend({
-  type: z142.literal("pcb_packing_error"),
+  type: z143.literal("pcb_packing_error"),
   pcb_packing_error_id: getZodPrefixedIdWithDefault("pcb_packing_error"),
-  error_type: z142.literal("pcb_packing_error").default("pcb_packing_error"),
-  pcb_group_id: z142.string().optional(),
-  subcircuit_id: z142.string().optional()
+  error_type: z143.literal("pcb_packing_error").default("pcb_packing_error"),
+  pcb_group_id: z143.string().optional(),
+  subcircuit_id: z143.string().optional()
 }).describe("Defines a failure to pack PCB components within layout bounds");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panelization_placement_error.ts
-import { z as z143 } from "zod";
+import { z as z144 } from "zod";
 var pcb_panelization_placement_error = base_circuit_json_error.extend({
-  type: z143.literal("pcb_panelization_placement_error"),
+  type: z144.literal("pcb_panelization_placement_error"),
   pcb_panelization_placement_error_id: getZodPrefixedIdWithDefault(
     "pcb_panelization_placement_error"
   ),
-  error_type: z143.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
-  pcb_panel_id: z143.string().optional(),
-  pcb_board_id: z143.string().optional(),
-  subcircuit_id: z143.string().optional()
+  error_type: z144.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
+  pcb_panel_id: z144.string().optional(),
+  pcb_board_id: z144.string().optional(),
+  subcircuit_id: z144.string().optional()
 }).describe("Defines a panelization placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z144 } from "zod";
-var pcb_trace_hint = z144.object({
-  type: z144.literal("pcb_trace_hint"),
+import { z as z145 } from "zod";
+var pcb_trace_hint = z145.object({
+  type: z145.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z144.string(),
-  pcb_component_id: z144.string(),
-  route: z144.array(route_hint_point),
-  subcircuit_id: z144.string().optional()
+  pcb_port_id: z145.string(),
+  pcb_component_id: z145.string(),
+  route: z145.array(route_hint_point),
+  subcircuit_id: z145.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z145 } from "zod";
-var pcb_silkscreen_line = z145.object({
-  type: z145.literal("pcb_silkscreen_line"),
+import { z as z146 } from "zod";
+var pcb_silkscreen_line = z146.object({
+  type: z146.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z145.string(),
-  pcb_group_id: z145.string().optional(),
-  subcircuit_id: z145.string().optional(),
+  pcb_component_id: z146.string(),
+  pcb_group_id: z146.string().optional(),
+  subcircuit_id: z146.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -3304,32 +3321,32 @@ var pcb_silkscreen_line = z145.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z146 } from "zod";
-var pcb_silkscreen_path = z146.object({
-  type: z146.literal("pcb_silkscreen_path"),
+import { z as z147 } from "zod";
+var pcb_silkscreen_path = z147.object({
+  type: z147.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z146.string(),
-  pcb_group_id: z146.string().optional(),
-  subcircuit_id: z146.string().optional(),
+  pcb_component_id: z147.string(),
+  pcb_group_id: z147.string().optional(),
+  subcircuit_id: z147.string().optional(),
   layer: visible_layer,
-  route: z146.array(point),
+  route: z147.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z147 } from "zod";
-var pcb_silkscreen_text = z147.object({
-  type: z147.literal("pcb_silkscreen_text"),
+import { z as z148 } from "zod";
+var pcb_silkscreen_text = z148.object({
+  type: z148.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z147.string().optional(),
-  subcircuit_id: z147.string().optional(),
-  font: z147.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z148.string().optional(),
+  subcircuit_id: z148.string().optional(),
+  font: z148.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z147.string(),
-  text: z147.string(),
-  is_knockout: z147.boolean().default(false).optional(),
-  knockout_padding: z147.object({
+  pcb_component_id: z148.string(),
+  text: z148.string(),
+  is_knockout: z148.boolean().default(false).optional(),
+  knockout_padding: z148.object({
     left: length,
     top: length,
     bottom: length,
@@ -3340,27 +3357,27 @@ var pcb_silkscreen_text = z147.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z147.number().optional(),
+  ccw_rotation: z148.number().optional(),
   layer: layer_ref,
-  is_mirrored: z147.boolean().default(false).optional(),
+  is_mirrored: z148.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z148 } from "zod";
-var pcb_copper_text = z148.object({
-  type: z148.literal("pcb_copper_text"),
+import { z as z149 } from "zod";
+var pcb_copper_text = z149.object({
+  type: z149.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z148.string().optional(),
-  subcircuit_id: z148.string().optional(),
-  font: z148.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z149.string().optional(),
+  subcircuit_id: z149.string().optional(),
+  font: z149.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z148.string(),
-  text: z148.string(),
-  is_knockout: z148.boolean().default(false).optional(),
-  knockout_padding: z148.object({
+  pcb_component_id: z149.string(),
+  text: z149.string(),
+  is_knockout: z149.boolean().default(false).optional(),
+  knockout_padding: z149.object({
     left: length,
     top: length,
     bottom: length,
@@ -3371,61 +3388,61 @@ var pcb_copper_text = z148.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z148.number().optional(),
+  ccw_rotation: z149.number().optional(),
   layer: layer_ref,
-  is_mirrored: z148.boolean().default(false).optional(),
+  is_mirrored: z149.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z149 } from "zod";
-var pcb_silkscreen_rect = z149.object({
-  type: z149.literal("pcb_silkscreen_rect"),
+import { z as z150 } from "zod";
+var pcb_silkscreen_rect = z150.object({
+  type: z150.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z149.string(),
-  pcb_group_id: z149.string().optional(),
-  subcircuit_id: z149.string().optional(),
+  pcb_component_id: z150.string(),
+  pcb_group_id: z150.string().optional(),
+  subcircuit_id: z150.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z149.boolean().default(true).optional(),
-  has_stroke: z149.boolean().optional(),
-  is_stroke_dashed: z149.boolean().optional(),
-  ccw_rotation: z149.number().optional()
+  is_filled: z150.boolean().default(true).optional(),
+  has_stroke: z150.boolean().optional(),
+  is_stroke_dashed: z150.boolean().optional(),
+  ccw_rotation: z150.number().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z150 } from "zod";
-var pcb_silkscreen_circle = z150.object({
-  type: z150.literal("pcb_silkscreen_circle"),
+import { z as z151 } from "zod";
+var pcb_silkscreen_circle = z151.object({
+  type: z151.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z150.string(),
-  pcb_group_id: z150.string().optional(),
-  subcircuit_id: z150.string().optional(),
+  pcb_component_id: z151.string(),
+  pcb_group_id: z151.string().optional(),
+  subcircuit_id: z151.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm"),
-  is_filled: z150.boolean().optional()
+  is_filled: z151.boolean().optional()
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z151 } from "zod";
-var pcb_silkscreen_oval = z151.object({
-  type: z151.literal("pcb_silkscreen_oval"),
+import { z as z152 } from "zod";
+var pcb_silkscreen_oval = z152.object({
+  type: z152.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z151.string(),
-  pcb_group_id: z151.string().optional(),
-  subcircuit_id: z151.string().optional(),
+  pcb_component_id: z152.string(),
+  pcb_group_id: z152.string().optional(),
+  subcircuit_id: z152.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -3435,267 +3452,267 @@ var pcb_silkscreen_oval = z151.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_graphic.ts
-import { z as z152 } from "zod";
-var pcb_silkscreen_graphic_base = z152.object({
-  type: z152.literal("pcb_silkscreen_graphic"),
+import { z as z153 } from "zod";
+var pcb_silkscreen_graphic_base = z153.object({
+  type: z153.literal("pcb_silkscreen_graphic"),
   pcb_silkscreen_graphic_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_graphic"
   ),
-  pcb_component_id: z152.string(),
-  pcb_group_id: z152.string().optional(),
-  subcircuit_id: z152.string().optional(),
+  pcb_component_id: z153.string(),
+  pcb_group_id: z153.string().optional(),
+  subcircuit_id: z153.string().optional(),
   layer: visible_layer,
   image_asset: asset.optional()
 });
 var pcb_silkscreen_graphic_brep = pcb_silkscreen_graphic_base.extend({
-  shape: z152.literal("brep"),
+  shape: z153.literal("brep"),
   brep_shape
 }).describe("Defines a BRep silkscreen graphic on the PCB");
 expectTypesMatch(
   true
 );
-var pcb_silkscreen_graphic = z152.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
+var pcb_silkscreen_graphic = z153.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z153 } from "zod";
-var pcb_silkscreen_pill = z153.object({
-  type: z153.literal("pcb_silkscreen_pill"),
+import { z as z154 } from "zod";
+var pcb_silkscreen_pill = z154.object({
+  type: z154.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z153.string(),
-  pcb_group_id: z153.string().optional(),
-  subcircuit_id: z153.string().optional(),
+  pcb_component_id: z154.string(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
-  ccw_rotation: z153.number().optional()
+  ccw_rotation: z154.number().optional()
 }).describe("Defines a silkscreen pill on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z154 } from "zod";
-var pcb_fabrication_note_text = z154.object({
-  type: z154.literal("pcb_fabrication_note_text"),
+import { z as z155 } from "zod";
+var pcb_fabrication_note_text = z155.object({
+  type: z155.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z154.string().optional(),
-  pcb_group_id: z154.string().optional(),
-  font: z154.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z155.string().optional(),
+  pcb_group_id: z155.string().optional(),
+  font: z155.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z154.string(),
-  text: z154.string(),
-  ccw_rotation: z154.number().optional(),
+  pcb_component_id: z155.string(),
+  text: z155.string(),
+  ccw_rotation: z155.number().optional(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z154.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z154.string().optional()
+  anchor_alignment: z155.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z155.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z155 } from "zod";
-var pcb_fabrication_note_path = z155.object({
-  type: z155.literal("pcb_fabrication_note_path"),
+import { z as z156 } from "zod";
+var pcb_fabrication_note_path = z156.object({
+  type: z156.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z155.string(),
-  subcircuit_id: z155.string().optional(),
+  pcb_component_id: z156.string(),
+  subcircuit_id: z156.string().optional(),
   layer: layer_ref,
-  route: z155.array(point),
+  route: z156.array(point),
   stroke_width: length,
-  color: z155.string().optional(),
-  is_filled: z155.boolean().optional(),
-  has_stroke: z155.boolean().optional()
+  color: z156.string().optional(),
+  is_filled: z156.boolean().optional(),
+  has_stroke: z156.boolean().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z156 } from "zod";
-var pcb_fabrication_note_rect = z156.object({
-  type: z156.literal("pcb_fabrication_note_rect"),
+import { z as z157 } from "zod";
+var pcb_fabrication_note_rect = z157.object({
+  type: z157.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z156.string(),
-  pcb_group_id: z156.string().optional(),
-  subcircuit_id: z156.string().optional(),
+  pcb_component_id: z157.string(),
+  pcb_group_id: z157.string().optional(),
+  subcircuit_id: z157.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z156.boolean().optional(),
-  has_stroke: z156.boolean().optional(),
-  is_stroke_dashed: z156.boolean().optional(),
-  color: z156.string().optional()
+  is_filled: z157.boolean().optional(),
+  has_stroke: z157.boolean().optional(),
+  is_stroke_dashed: z157.boolean().optional(),
+  color: z157.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z157 } from "zod";
-var pcb_fabrication_note_dimension = z157.object({
-  type: z157.literal("pcb_fabrication_note_dimension"),
+import { z as z158 } from "zod";
+var pcb_fabrication_note_dimension = z158.object({
+  type: z158.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z157.string(),
-  pcb_group_id: z157.string().optional(),
-  subcircuit_id: z157.string().optional(),
+  pcb_component_id: z158.string(),
+  pcb_group_id: z158.string().optional(),
+  subcircuit_id: z158.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z157.string().optional(),
-  text_ccw_rotation: z157.number().optional(),
+  text: z158.string().optional(),
+  text_ccw_rotation: z158.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z157.object({
-    x: z157.number(),
-    y: z157.number()
+  offset_direction: z158.object({
+    x: z158.number(),
+    y: z158.number()
   }).optional(),
-  font: z157.literal("tscircuit2024").default("tscircuit2024"),
+  font: z158.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z157.string().optional(),
+  color: z158.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z158 } from "zod";
-var pcb_note_text = z158.object({
-  type: z158.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z158.string().optional(),
-  pcb_group_id: z158.string().optional(),
-  subcircuit_id: z158.string().optional(),
-  name: z158.string().optional(),
-  font: z158.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z158.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z158.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  layer: visible_layer.default("top"),
-  is_mirrored_from_top_view: z158.boolean().optional(),
-  color: z158.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-
-// src/pcb/pcb_note_rect.ts
 import { z as z159 } from "zod";
-var pcb_note_rect = z159.object({
-  type: z159.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
+var pcb_note_text = z159.object({
+  type: z159.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
   pcb_component_id: z159.string().optional(),
   pcb_group_id: z159.string().optional(),
   subcircuit_id: z159.string().optional(),
   name: z159.string().optional(),
+  font: z159.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z159.string().optional(),
-  center: point,
-  width: length,
-  height: length,
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z159.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   layer: visible_layer.default("top"),
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z159.boolean().optional(),
-  has_stroke: z159.boolean().optional(),
-  is_stroke_dashed: z159.boolean().optional(),
+  is_mirrored_from_top_view: z159.boolean().optional(),
   color: z159.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_path.ts
+// src/pcb/pcb_note_rect.ts
 import { z as z160 } from "zod";
-var pcb_note_path = z160.object({
-  type: z160.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z160.object({
+  type: z160.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z160.string().optional(),
   pcb_group_id: z160.string().optional(),
   subcircuit_id: z160.string().optional(),
   name: z160.string().optional(),
   text: z160.string().optional(),
-  route: z160.array(point),
+  center: point,
+  width: length,
+  height: length,
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z160.boolean().optional(),
+  has_stroke: z160.boolean().optional(),
+  is_stroke_dashed: z160.boolean().optional(),
   color: z160.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_line.ts
+// src/pcb/pcb_note_path.ts
 import { z as z161 } from "zod";
-var pcb_note_line = z161.object({
-  type: z161.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z161.object({
+  type: z161.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z161.string().optional(),
   pcb_group_id: z161.string().optional(),
   subcircuit_id: z161.string().optional(),
   name: z161.string().optional(),
   text: z161.string().optional(),
+  route: z161.array(point),
+  layer: visible_layer.default("top"),
+  stroke_width: length.default("0.1mm"),
+  color: z161.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_line.ts
+import { z as z162 } from "zod";
+var pcb_note_line = z162.object({
+  type: z162.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z162.string().optional(),
+  pcb_group_id: z162.string().optional(),
+  subcircuit_id: z162.string().optional(),
+  name: z162.string().optional(),
+  text: z162.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   layer: visible_layer.default("top"),
   stroke_width: distance.default("0.1mm"),
-  color: z161.string().optional(),
-  is_dashed: z161.boolean().optional()
+  color: z162.string().optional(),
+  is_dashed: z162.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z162 } from "zod";
-var pcb_note_dimension = z162.object({
-  type: z162.literal("pcb_note_dimension"),
+import { z as z163 } from "zod";
+var pcb_note_dimension = z163.object({
+  type: z163.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z162.string().optional(),
-  pcb_group_id: z162.string().optional(),
-  subcircuit_id: z162.string().optional(),
-  name: z162.string().optional(),
+  pcb_component_id: z163.string().optional(),
+  pcb_group_id: z163.string().optional(),
+  subcircuit_id: z163.string().optional(),
+  name: z163.string().optional(),
   from: point,
   to: point,
-  text: z162.string().optional(),
-  text_ccw_rotation: z162.number().optional(),
+  text: z163.string().optional(),
+  text_ccw_rotation: z163.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z162.object({
-    x: z162.number(),
-    y: z162.number()
+  offset_direction: z163.object({
+    x: z163.number(),
+    y: z163.number()
   }).optional(),
-  font: z162.literal("tscircuit2024").default("tscircuit2024"),
+  font: z163.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
   layer: visible_layer.default("top"),
-  color: z162.string().optional(),
+  color: z163.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z163 } from "zod";
+import { z as z164 } from "zod";
 var pcb_footprint_overlap_error = base_circuit_json_error.extend({
-  type: z163.literal("pcb_footprint_overlap_error"),
+  type: z164.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z163.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  pcb_smtpad_ids: z163.array(z163.string()).optional(),
-  pcb_plated_hole_ids: z163.array(z163.string()).optional(),
-  pcb_hole_ids: z163.array(z163.string()).optional(),
-  pcb_keepout_ids: z163.array(z163.string()).optional()
+  error_type: z164.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  pcb_smtpad_ids: z164.array(z164.string()).optional(),
+  pcb_plated_hole_ids: z164.array(z164.string()).optional(),
+  pcb_hole_ids: z164.array(z164.string()).optional(),
+  pcb_keepout_ids: z164.array(z164.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_courtyard_overlap_error.ts
-import { z as z164 } from "zod";
+import { z as z165 } from "zod";
 var pcb_courtyard_overlap_error = base_circuit_json_error.extend({
-  type: z164.literal("pcb_courtyard_overlap_error"),
+  type: z165.literal("pcb_courtyard_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z164.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
-  pcb_component_ids: z164.tuple([z164.string(), z164.string()])
+  error_type: z165.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
+  pcb_component_ids: z165.tuple([z165.string(), z165.string()])
 }).describe(
   "Error emitted when the courtyard (CrtYd) of one PCB component overlaps with the courtyard of another"
 );
@@ -3704,78 +3721,78 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z165 } from "zod";
-var pcb_keepout_outline = z165.object({
-  type: z165.literal("pcb_keepout"),
-  shape: z165.literal("outline"),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
-  outline: z165.array(point).min(2),
+import { z as z166 } from "zod";
+var pcb_keepout_outline = z166.object({
+  type: z166.literal("pcb_keepout"),
+  shape: z166.literal("outline"),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
+  outline: z166.array(point).min(2),
   stroke_width: length,
-  pcb_keepout_id: z165.string(),
-  layers: z165.array(z165.string()),
-  description: z165.string().optional(),
-  excluded_pcb_component_ids: z165.array(z165.string()).optional(),
-  warning_only: z165.boolean().optional(),
-  allow_traces: z165.boolean().optional(),
-  allow_placements: z165.boolean().optional()
-});
-var pcb_keepout = z165.object({
-  type: z165.literal("pcb_keepout"),
-  shape: z165.literal("rect"),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
+  pcb_keepout_id: z166.string(),
+  layers: z166.array(z166.string()),
+  description: z166.string().optional(),
+  excluded_pcb_component_ids: z166.array(z166.string()).optional(),
+  warning_only: z166.boolean().optional(),
+  allow_traces: z166.boolean().optional(),
+  allow_placements: z166.boolean().optional()
+});
+var pcb_keepout = z166.object({
+  type: z166.literal("pcb_keepout"),
+  shape: z166.literal("rect"),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z165.string(),
-  layers: z165.array(z165.string()),
+  pcb_keepout_id: z166.string(),
+  layers: z166.array(z166.string()),
   // Specify layers where the keepout applies
-  description: z165.string().optional(),
+  description: z166.string().optional(),
   // Optional description of the keepout
-  excluded_pcb_component_ids: z165.array(z165.string()).optional(),
-  warning_only: z165.boolean().optional(),
-  allow_traces: z165.boolean().optional(),
-  allow_placements: z165.boolean().optional()
+  excluded_pcb_component_ids: z166.array(z166.string()).optional(),
+  warning_only: z166.boolean().optional(),
+  allow_traces: z166.boolean().optional(),
+  allow_placements: z166.boolean().optional()
 }).or(
-  z165.object({
-    type: z165.literal("pcb_keepout"),
-    shape: z165.literal("circle"),
-    pcb_group_id: z165.string().optional(),
-    subcircuit_id: z165.string().optional(),
+  z166.object({
+    type: z166.literal("pcb_keepout"),
+    shape: z166.literal("circle"),
+    pcb_group_id: z166.string().optional(),
+    subcircuit_id: z166.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z165.string(),
-    layers: z165.array(z165.string()),
+    pcb_keepout_id: z166.string(),
+    layers: z166.array(z166.string()),
     // Specify layers where the keepout applies
-    description: z165.string().optional(),
+    description: z166.string().optional(),
     // Optional description of the keepout
-    excluded_pcb_component_ids: z165.array(z165.string()).optional(),
-    warning_only: z165.boolean().optional(),
-    allow_traces: z165.boolean().optional(),
-    allow_placements: z165.boolean().optional()
+    excluded_pcb_component_ids: z166.array(z166.string()).optional(),
+    warning_only: z166.boolean().optional(),
+    allow_traces: z166.boolean().optional(),
+    allow_placements: z166.boolean().optional()
   })
 ).or(pcb_keepout_outline);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_keepout_overlap_warning.ts
-import { z as z166 } from "zod";
-var pcb_keepout_overlap_warning = z166.object({
-  type: z166.literal("pcb_keepout_overlap_warning"),
+import { z as z167 } from "zod";
+var pcb_keepout_overlap_warning = z167.object({
+  type: z167.literal("pcb_keepout_overlap_warning"),
   pcb_keepout_overlap_warning_id: getZodPrefixedIdWithDefault(
     "pcb_keepout_overlap_warning"
   ),
-  warning_type: z166.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
-  message: z166.string(),
-  pcb_keepout_id: z166.string(),
-  pcb_component_ids: z166.array(z166.string()).optional(),
-  pcb_trace_ids: z166.array(z166.string()).optional(),
-  pcb_smtpad_ids: z166.array(z166.string()).optional(),
-  pcb_plated_hole_ids: z166.array(z166.string()).optional(),
-  pcb_via_ids: z166.array(z166.string()).optional(),
+  warning_type: z167.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
+  message: z167.string(),
+  pcb_keepout_id: z167.string(),
+  pcb_component_ids: z167.array(z167.string()).optional(),
+  pcb_trace_ids: z167.array(z167.string()).optional(),
+  pcb_smtpad_ids: z167.array(z167.string()).optional(),
+  pcb_plated_hole_ids: z167.array(z167.string()).optional(),
+  pcb_via_ids: z167.array(z167.string()).optional(),
   center: point.optional(),
-  subcircuit_id: z166.string().optional()
+  subcircuit_id: z167.string().optional()
 }).describe(
   "Warning emitted when copper overlaps a PCB keepout with warning_only enabled"
 );
@@ -3784,18 +3801,18 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_cutout.ts
-import { z as z167 } from "zod";
-var pcb_cutout_base = z167.object({
-  type: z167.literal("pcb_cutout"),
+import { z as z168 } from "zod";
+var pcb_cutout_base = z168.object({
+  type: z168.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_component_id: z167.string().optional(),
-  pcb_group_id: z167.string().optional(),
-  subcircuit_id: z167.string().optional(),
-  pcb_board_id: z167.string().optional(),
-  pcb_panel_id: z167.string().optional()
+  pcb_component_id: z168.string().optional(),
+  pcb_group_id: z168.string().optional(),
+  subcircuit_id: z168.string().optional(),
+  pcb_board_id: z168.string().optional(),
+  pcb_panel_id: z168.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z167.literal("rect"),
+  shape: z168.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3804,26 +3821,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z167.literal("circle"),
+  shape: z168.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z167.literal("polygon"),
-  points: z167.array(point)
+  shape: z168.literal("polygon"),
+  points: z168.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z167.literal("path"),
-  route: z167.array(point),
+  shape: z168.literal("path"),
+  route: z168.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z167.discriminatedUnion("shape", [
+var pcb_cutout = z168.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3832,223 +3849,223 @@ var pcb_cutout = z167.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z168 } from "zod";
+import { z as z169 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z168.literal("pcb_missing_footprint_error"),
+  type: z169.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional(),
-  error_type: z168.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z168.string()
+  pcb_group_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional(),
+  error_type: z169.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z169.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z169 } from "zod";
+import { z as z170 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z169.literal("external_footprint_load_error"),
+  type: z170.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z169.string(),
-  source_component_id: z169.string(),
-  pcb_group_id: z169.string().optional(),
-  subcircuit_id: z169.string().optional(),
-  footprinter_string: z169.string().optional(),
-  error_type: z169.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z170.string(),
+  source_component_id: z170.string(),
+  pcb_group_id: z170.string().optional(),
+  subcircuit_id: z170.string().optional(),
+  footprinter_string: z170.string().optional(),
+  error_type: z170.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z170 } from "zod";
+import { z as z171 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z170.literal("circuit_json_footprint_load_error"),
+  type: z171.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z170.string(),
-  source_component_id: z170.string(),
-  pcb_group_id: z170.string().optional(),
-  subcircuit_id: z170.string().optional(),
-  error_type: z170.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z170.array(z170.any()).optional()
+  pcb_component_id: z171.string(),
+  source_component_id: z171.string(),
+  pcb_group_id: z171.string().optional(),
+  subcircuit_id: z171.string().optional(),
+  error_type: z171.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z171.array(z171.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z171 } from "zod";
-var pcb_group = z171.object({
-  type: z171.literal("pcb_group"),
+import { z as z172 } from "zod";
+var pcb_group = z172.object({
+  type: z172.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z171.string(),
-  is_subcircuit: z171.boolean().optional(),
-  subcircuit_id: z171.string().optional(),
+  source_group_id: z172.string(),
+  is_subcircuit: z172.boolean().optional(),
+  subcircuit_id: z172.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z171.string().optional().describe(
+  display_offset_x: z172.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z171.string().optional().describe(
+  display_offset_y: z172.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z171.array(point).optional(),
+  outline: z172.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z171.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z171.string().optional(),
-  positioned_relative_to_pcb_board_id: z171.string().optional(),
-  pcb_component_ids: z171.array(z171.string()),
-  child_layout_mode: z171.enum(["packed", "none"]).optional(),
-  name: z171.string().optional(),
-  description: z171.string().optional(),
-  layout_mode: z171.string().optional(),
-  autorouter_configuration: z171.object({
+  position_mode: z172.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z172.string().optional(),
+  positioned_relative_to_pcb_board_id: z172.string().optional(),
+  pcb_component_ids: z172.array(z172.string()),
+  child_layout_mode: z172.enum(["packed", "none"]).optional(),
+  name: z172.string().optional(),
+  description: z172.string().optional(),
+  layout_mode: z172.string().optional(),
+  autorouter_configuration: z172.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z171.string().optional()
+  autorouter_used_string: z172.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z172 } from "zod";
+import { z as z173 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z172.literal("pcb_autorouting_error"),
+  type: z173.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z172.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z172.string().optional()
+  error_type: z173.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z173.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_preflight_routing_error.ts
-import { z as z173 } from "zod";
+import { z as z174 } from "zod";
 var pcb_preflight_routing_error = base_circuit_json_error.extend({
-  type: z173.literal("pcb_preflight_routing_error"),
+  type: z174.literal("pcb_preflight_routing_error"),
   pcb_preflight_routing_error_id: getZodPrefixedIdWithDefault(
     "pcb_preflight_routing_error"
   ),
-  error_type: z173.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
-  error_code: z173.string(),
-  subcircuit_id: z173.string().optional(),
-  pcb_group_id: z173.string().optional(),
-  routing_phase_index: z173.number().int().optional(),
-  phase_name: z173.string().optional(),
-  source_trace_ids: z173.array(z173.string()).optional(),
-  pcb_component_ids: z173.array(z173.string()).optional(),
-  pcb_port_ids: z173.array(z173.string()).optional(),
-  related_error_ids: z173.array(z173.string()).optional(),
-  measurements: z173.record(z173.number().finite()).optional()
+  error_type: z174.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
+  error_code: z174.string(),
+  subcircuit_id: z174.string().optional(),
+  pcb_group_id: z174.string().optional(),
+  routing_phase_index: z174.number().int().optional(),
+  phase_name: z174.string().optional(),
+  source_trace_ids: z174.array(z174.string()).optional(),
+  pcb_component_ids: z174.array(z174.string()).optional(),
+  pcb_port_ids: z174.array(z174.string()).optional(),
+  related_error_ids: z174.array(z174.string()).optional(),
+  measurements: z174.record(z174.number().finite()).optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z174 } from "zod";
-var pcb_manual_edit_conflict_warning = z174.object({
-  type: z174.literal("pcb_manual_edit_conflict_warning"),
+import { z as z175 } from "zod";
+var pcb_manual_edit_conflict_warning = z175.object({
+  type: z175.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z174.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z174.string(),
-  pcb_component_id: z174.string(),
-  pcb_group_id: z174.string().optional(),
-  subcircuit_id: z174.string().optional(),
-  source_component_id: z174.string()
+  warning_type: z175.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z175.string(),
+  pcb_component_id: z175.string(),
+  pcb_group_id: z175.string().optional(),
+  subcircuit_id: z175.string().optional(),
+  source_component_id: z175.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z175 } from "zod";
-var connectorOrientationDirection = z175.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z175.object({
-  type: z175.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z176 } from "zod";
+var connectorOrientationDirection = z176.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z176.object({
+  type: z176.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z175.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z175.string(),
-  pcb_component_id: z175.string(),
-  source_component_id: z175.string().optional(),
-  pcb_board_id: z175.string().optional(),
+  warning_type: z176.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z176.string(),
+  pcb_component_id: z176.string(),
+  source_component_id: z176.string().optional(),
+  pcb_board_id: z176.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z175.string().optional()
+  subcircuit_id: z176.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_missing_courtyard_warning.ts
-import { z as z176 } from "zod";
-var pcb_component_missing_courtyard_warning = z176.object({
-  type: z176.literal("pcb_component_missing_courtyard_warning"),
+import { z as z177 } from "zod";
+var pcb_component_missing_courtyard_warning = z177.object({
+  type: z177.literal("pcb_component_missing_courtyard_warning"),
   pcb_component_missing_courtyard_warning_id: getZodPrefixedIdWithDefault(
     "pcb_component_missing_courtyard_warning"
   ),
-  warning_type: z176.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
-  message: z176.string(),
-  pcb_component_id: z176.string(),
-  source_component_id: z176.string().optional(),
-  subcircuit_id: z176.string().optional()
+  warning_type: z177.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
+  message: z177.string(),
+  pcb_component_id: z177.string(),
+  source_component_id: z177.string().optional(),
+  subcircuit_id: z177.string().optional()
 }).describe("Warning emitted when a PCB component has no courtyard geometry");
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z177 } from "zod";
-var supplier_footprint_mismatch_warning = z177.object({
-  type: z177.literal("supplier_footprint_mismatch_warning"),
+import { z as z178 } from "zod";
+var supplier_footprint_mismatch_warning = z178.object({
+  type: z178.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z177.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z177.string(),
-  source_component_id: z177.string(),
-  pcb_component_id: z177.string().optional(),
-  pcb_group_id: z177.string().optional(),
-  subcircuit_id: z177.string().optional(),
+  warning_type: z178.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z178.string(),
+  source_component_id: z178.string(),
+  pcb_component_id: z178.string().optional(),
+  pcb_group_id: z178.string().optional(),
+  subcircuit_id: z178.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z177.string().optional(),
-  supplier_footprint_url: z177.string().optional(),
-  footprint_copper_intersection_over_union: z177.number()
+  supplier_part_number: z178.string().optional(),
+  supplier_footprint_url: z178.string().optional(),
+  footprint_copper_intersection_over_union: z178.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabricator_extra_charge_warning.ts
-import { z as z178 } from "zod";
-var pcb_fabricator_extra_charge_warning = z178.object({
-  type: z178.literal("pcb_fabricator_extra_charge_warning"),
+import { z as z179 } from "zod";
+var pcb_fabricator_extra_charge_warning = z179.object({
+  type: z179.literal("pcb_fabricator_extra_charge_warning"),
   pcb_fabricator_extra_charge_warning_id: getZodPrefixedIdWithDefault(
     "pcb_fabricator_extra_charge_warning"
   ),
-  warning_type: z178.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
-  message: z178.string(),
-  fabricator_preset: z178.string(),
-  pcb_board_id: z178.string().optional(),
-  pcb_via_ids: z178.array(z178.string()).optional(),
-  subcircuit_id: z178.string().optional()
+  warning_type: z179.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
+  message: z179.string(),
+  fabricator_preset: z179.string(),
+  pcb_board_id: z179.string().optional(),
+  pcb_via_ids: z179.array(z179.string()).optional(),
+  subcircuit_id: z179.string().optional()
 }).describe(
   "Warning that a design feature incurs an extra charge for the selected fabricator preset, such as via hole diameters below 0.3 mm with JLCPCB economy or standard presets."
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z179 } from "zod";
-var pcb_breakout_point = z179.object({
-  type: z179.literal("pcb_breakout_point"),
+import { z as z180 } from "zod";
+var pcb_breakout_point = z180.object({
+  type: z180.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z179.string(),
-  subcircuit_id: z179.string().optional(),
-  source_trace_id: z179.string().optional(),
-  source_port_id: z179.string().optional(),
-  source_net_id: z179.string().optional(),
+  pcb_group_id: z180.string(),
+  subcircuit_id: z180.string().optional(),
+  source_trace_id: z180.string().optional(),
+  source_port_id: z180.string().optional(),
+  source_net_id: z180.string().optional(),
   layer: layer_ref.optional(),
   x: distance,
   y: distance
@@ -4058,61 +4075,61 @@ var pcb_breakout_point = z179.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z180 } from "zod";
-var pcb_ground_plane = z180.object({
-  type: z180.literal("pcb_ground_plane"),
+import { z as z181 } from "zod";
+var pcb_ground_plane = z181.object({
+  type: z181.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z180.string(),
-  source_net_id: z180.string(),
-  pcb_group_id: z180.string().optional(),
-  subcircuit_id: z180.string().optional()
+  source_pcb_ground_plane_id: z181.string(),
+  source_net_id: z181.string(),
+  pcb_group_id: z181.string().optional(),
+  subcircuit_id: z181.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z181 } from "zod";
-var pcb_ground_plane_region = z181.object({
-  type: z181.literal("pcb_ground_plane_region"),
+import { z as z182 } from "zod";
+var pcb_ground_plane_region = z182.object({
+  type: z182.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z181.string(),
-  pcb_group_id: z181.string().optional(),
-  subcircuit_id: z181.string().optional(),
+  pcb_ground_plane_id: z182.string(),
+  pcb_group_id: z182.string().optional(),
+  subcircuit_id: z182.string().optional(),
   layer: layer_ref,
-  points: z181.array(point)
+  points: z182.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z182 } from "zod";
-var pcb_thermal_spoke = z182.object({
-  type: z182.literal("pcb_thermal_spoke"),
+import { z as z183 } from "zod";
+var pcb_thermal_spoke = z183.object({
+  type: z183.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z182.string(),
-  shape: z182.string(),
-  spoke_count: z182.number(),
+  pcb_ground_plane_id: z183.string(),
+  shape: z183.string(),
+  spoke_count: z183.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z182.string().optional(),
-  subcircuit_id: z182.string().optional()
+  pcb_plated_hole_id: z183.string().optional(),
+  subcircuit_id: z183.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z183 } from "zod";
-var pcb_copper_pour_base = z183.object({
-  type: z183.literal("pcb_copper_pour"),
+import { z as z184 } from "zod";
+var pcb_copper_pour_base = z184.object({
+  type: z184.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z183.string().optional(),
-  subcircuit_id: z183.string().optional(),
+  pcb_group_id: z184.string().optional(),
+  subcircuit_id: z184.string().optional(),
   layer: layer_ref,
-  source_net_id: z183.string().optional(),
-  covered_with_solder_mask: z183.boolean().optional().default(true)
+  source_net_id: z184.string().optional(),
+  covered_with_solder_mask: z184.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z183.literal("rect"),
+  shape: z184.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -4120,16 +4137,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z183.literal("brep"),
+  shape: z184.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z183.literal("polygon"),
-  points: z183.array(point)
+  shape: z184.literal("polygon"),
+  points: z184.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z183.discriminatedUnion("shape", [
+var pcb_copper_pour = z184.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -4137,99 +4154,99 @@ var pcb_copper_pour = z183.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z184 } from "zod";
+import { z as z185 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z184.literal("pcb_component_outside_board_error"),
+  type: z185.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z184.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z184.string(),
-  pcb_board_id: z184.string(),
+  error_type: z185.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z185.string(),
+  pcb_board_id: z185.string(),
   component_center: point,
-  component_bounds: z184.object({
-    min_x: z184.number(),
-    max_x: z184.number(),
-    min_y: z184.number(),
-    max_y: z184.number()
+  component_bounds: z185.object({
+    min_x: z185.number(),
+    max_x: z185.number(),
+    min_y: z185.number(),
+    max_y: z185.number()
   }),
-  subcircuit_id: z184.string().optional(),
-  source_component_id: z184.string().optional()
+  subcircuit_id: z185.string().optional(),
+  source_component_id: z185.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z185 } from "zod";
+import { z as z186 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z185.literal("pcb_component_not_on_board_edge_error"),
+  type: z186.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z185.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z185.string(),
-  pcb_board_id: z185.string(),
+  error_type: z186.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z186.string(),
+  pcb_board_id: z186.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z185.number(),
-  source_component_id: z185.string().optional(),
-  subcircuit_id: z185.string().optional()
+  pad_to_nearest_board_edge_distance: z186.number(),
+  source_component_id: z186.string().optional(),
+  subcircuit_id: z186.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z186 } from "zod";
+import { z as z187 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z186.literal("pcb_component_invalid_layer_error"),
+  type: z187.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z186.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z186.string().optional(),
-  source_component_id: z186.string(),
+  error_type: z187.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z187.string().optional(),
+  source_component_id: z187.string(),
   layer: layer_ref,
-  subcircuit_id: z186.string().optional()
+  subcircuit_id: z187.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z187 } from "zod";
+import { z as z188 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z187.literal("pcb_via_clearance_error"),
+  type: z188.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z187.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z187.array(z187.string()).min(2),
+  error_type: z188.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z188.array(z188.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z187.object({
-    x: z187.number().optional(),
-    y: z187.number().optional()
+  pcb_center: z188.object({
+    x: z188.number().optional(),
+    y: z188.number().optional()
   }).optional(),
-  subcircuit_id: z187.string().optional()
+  subcircuit_id: z188.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z188 } from "zod";
+import { z as z189 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z188.literal("pcb_via_trace_clearance_error"),
+  type: z189.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z188.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z188.string(),
-  pcb_trace_id: z188.string(),
+  error_type: z189.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z189.string(),
+  pcb_trace_id: z189.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z188.object({
-    x: z188.number().optional(),
-    y: z188.number().optional()
+  center: z189.object({
+    x: z189.number().optional(),
+    y: z189.number().optional()
   }).optional(),
-  subcircuit_id: z188.string().optional()
+  subcircuit_id: z189.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -4238,41 +4255,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z189 } from "zod";
+import { z as z190 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z189.literal("pcb_pad_pad_clearance_error"),
+  type: z190.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z189.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z189.array(z189.string()).min(2),
+  error_type: z190.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z190.array(z190.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z189.object({
-    x: z189.number().optional(),
-    y: z189.number().optional()
+  center: z190.object({
+    x: z190.number().optional(),
+    y: z190.number().optional()
   }).optional(),
-  subcircuit_id: z189.string().optional()
+  subcircuit_id: z190.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z190 } from "zod";
+import { z as z191 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z190.literal("pcb_pad_trace_clearance_error"),
+  type: z191.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z190.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z190.string(),
-  pcb_trace_id: z190.string(),
+  error_type: z191.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z191.string(),
+  pcb_trace_id: z191.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z190.object({
-    x: z190.number().optional(),
-    y: z190.number().optional()
+  center: z191.object({
+    x: z191.number().optional(),
+    y: z191.number().optional()
   }).optional(),
-  subcircuit_id: z190.string().optional()
+  subcircuit_id: z191.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -4281,89 +4298,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z191 } from "zod";
-var pcb_courtyard_rect = z191.object({
-  type: z191.literal("pcb_courtyard_rect"),
+import { z as z192 } from "zod";
+var pcb_courtyard_rect = z192.object({
+  type: z192.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z191.string(),
-  pcb_group_id: z191.string().optional(),
-  subcircuit_id: z191.string().optional(),
+  pcb_component_id: z192.string(),
+  pcb_group_id: z192.string().optional(),
+  subcircuit_id: z192.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z191.string().optional()
+  color: z192.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z192 } from "zod";
-var pcb_courtyard_outline = z192.object({
-  type: z192.literal("pcb_courtyard_outline"),
+import { z as z193 } from "zod";
+var pcb_courtyard_outline = z193.object({
+  type: z193.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z192.string(),
-  pcb_group_id: z192.string().optional(),
-  subcircuit_id: z192.string().optional(),
+  pcb_component_id: z193.string(),
+  pcb_group_id: z193.string().optional(),
+  subcircuit_id: z193.string().optional(),
   layer: visible_layer,
-  outline: z192.array(point).min(2)
+  outline: z193.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z193 } from "zod";
-var pcb_courtyard_polygon = z193.object({
-  type: z193.literal("pcb_courtyard_polygon"),
+import { z as z194 } from "zod";
+var pcb_courtyard_polygon = z194.object({
+  type: z194.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z193.string(),
-  pcb_group_id: z193.string().optional(),
-  subcircuit_id: z193.string().optional(),
+  pcb_component_id: z194.string(),
+  pcb_group_id: z194.string().optional(),
+  subcircuit_id: z194.string().optional(),
   layer: visible_layer,
-  points: z193.array(point).min(3),
-  color: z193.string().optional()
+  points: z194.array(point).min(3),
+  color: z194.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z194 } from "zod";
-var pcb_courtyard_circle = z194.object({
-  type: z194.literal("pcb_courtyard_circle"),
+import { z as z195 } from "zod";
+var pcb_courtyard_circle = z195.object({
+  type: z195.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z194.string(),
-  pcb_group_id: z194.string().optional(),
-  subcircuit_id: z194.string().optional(),
+  pcb_component_id: z195.string(),
+  pcb_group_id: z195.string().optional(),
+  subcircuit_id: z195.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z194.string().optional()
+  color: z195.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z195 } from "zod";
-var pcb_courtyard_pill = z195.object({
-  type: z195.literal("pcb_courtyard_pill"),
+import { z as z196 } from "zod";
+var pcb_courtyard_pill = z196.object({
+  type: z196.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z195.string(),
-  pcb_group_id: z195.string().optional(),
-  subcircuit_id: z195.string().optional(),
+  pcb_component_id: z196.string(),
+  pcb_group_id: z196.string().optional(),
+  subcircuit_id: z196.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z195.string().optional()
+  color: z196.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z196 } from "zod";
+import { z as z197 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -4394,87 +4411,87 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z196.object({
-  type: z196.literal("cad_component"),
-  cad_component_id: z196.string(),
-  pcb_component_id: z196.string().optional().describe(
+var cad_component = z197.object({
+  type: z197.literal("cad_component"),
+  cad_component_id: z197.string(),
+  pcb_component_id: z197.string().optional().describe(
     "Optional PCB component reference; omit for CAD geometry without a PCB component"
   ),
-  source_component_id: z196.string(),
+  source_component_id: z197.string(),
   position: point3,
   rotation: point3.optional(),
-  is_on_folded_board: z196.boolean().optional().describe(
+  is_on_folded_board: z197.boolean().optional().describe(
     "True when position and rotation describe the assembled folded board pose. False or omitted means the flat board pose. PCB records remain flat; pcb_component_id identifies the flat mount and owning board for reversible transforms."
   ),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z196.string().optional(),
+  subcircuit_id: z197.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z196.string().optional(),
-  model_obj_url: z196.string().optional(),
-  model_stl_url: z196.string().optional(),
-  model_3mf_url: z196.string().optional(),
-  model_gltf_url: z196.string().optional(),
-  model_glb_url: z196.string().optional(),
-  model_step_url: z196.string().optional(),
-  model_wrl_url: z196.string().optional(),
+  footprinter_string: z197.string().optional(),
+  model_obj_url: z197.string().optional(),
+  model_stl_url: z197.string().optional(),
+  model_3mf_url: z197.string().optional(),
+  model_gltf_url: z197.string().optional(),
+  model_glb_url: z197.string().optional(),
+  model_step_url: z197.string().optional(),
+  model_wrl_url: z197.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z196.number().optional(),
-  model_board_normal_direction: z196.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z197.number().optional(),
+  model_board_normal_direction: z197.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z196.enum([
+  model_origin_alignment: z197.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z196.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z196.any().optional(),
-  show_as_translucent_model: z196.boolean().optional(),
-  show_as_bounding_box: z196.boolean().optional(),
-  show_hidden_edges: z196.boolean().optional(),
-  anchor_alignment: z196.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z197.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z197.any().optional(),
+  show_as_translucent_model: z197.boolean().optional(),
+  show_as_bounding_box: z197.boolean().optional(),
+  show_hidden_edges: z197.boolean().optional(),
+  anchor_alignment: z197.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines CAD geometry, optionally associated with a PCB component");
 expectTypesMatch(true);
 
 // src/cad/cad_collision_error.ts
-import { z as z197 } from "zod";
+import { z as z198 } from "zod";
 var cad_collision_error = base_circuit_json_error.extend({
-  type: z197.literal("cad_collision_error"),
+  type: z198.literal("cad_collision_error"),
   cad_collision_error_id: getZodPrefixedIdWithDefault("cad_collision_error"),
-  error_type: z197.literal("cad_collision_error").default("cad_collision_error"),
-  cad_component_ids: z197.array(z197.string()).min(1),
-  pcb_component_ids: z197.array(z197.string()).optional(),
-  source_component_ids: z197.array(z197.string()).min(1),
-  intersection_area_mm2: z197.number().finite().nonnegative(),
-  threshold_area_mm2: z197.number().finite().nonnegative()
+  error_type: z198.literal("cad_collision_error").default("cad_collision_error"),
+  cad_component_ids: z198.array(z198.string()).min(1),
+  pcb_component_ids: z198.array(z198.string()).optional(),
+  source_component_ids: z198.array(z198.string()).min(1),
+  intersection_area_mm2: z198.number().finite().nonnegative(),
+  threshold_area_mm2: z198.number().finite().nonnegative()
 }).describe(
   "An aperture-bearing part intersects the finished enclosure. The intersection_area_mm2 is the union silhouette area of the solid intersection projected along the aperture face normal, in the right-handed Circuit JSON world frame (+X right, +Y top, +Z above). It is an area in square millimetres, not intersection volume or surface area. This indicates possible aperture misplacement, insufficient size/depth, or body clearance problems; it does not prove which cause applies."
 );
 expectTypesMatch(true);
 
 // src/cad/cad_cable.ts
-import { z as z198 } from "zod";
+import { z as z199 } from "zod";
 var connectorPin1Position = point3.refine(
   (point2) => [point2.x, point2.y, point2.z].every(Number.isFinite),
   "Connector pin 1 positions must be finite"
 ).describe(
   "Resolved pin 1 position at the connector mating face, in right-handed circuit world, millimeters: +X right, +Y top, +Z above. An absolute point, not a direction. Computed by the circuit producer from endpoint geometry. Together with the endpoint path tangent, fixes connector roll and identifies its pin 1 side; renderers must not infer it from footprints."
 );
-var cad_cable = z198.object({
-  type: z198.literal("cad_cable"),
-  cad_cable_id: z198.string(),
-  name: z198.string().min(1),
-  from_source_component_id: z198.string(),
-  to_source_component_id: z198.string(),
+var cad_cable = z199.object({
+  type: z199.literal("cad_cable"),
+  cad_cable_id: z199.string(),
+  name: z199.string().min(1),
+  from_source_component_id: z199.string(),
+  to_source_component_id: z199.string(),
   from_connector_pin1_position: connectorPin1Position.optional(),
   to_connector_pin1_position: connectorPin1Position.optional(),
-  cableprinter_string: z198.string().min(1).describe(
+  cableprinter_string: z199.string().min(1).describe(
     'Physical cable definition, e.g. "usb_c" or "jst_ph_pins6". Independent of the route.'
   ),
-  path: z198.array(point3).min(2).refine(
+  path: z199.array(point3).min(2).refine(
     (path) => path.every(
       (point2, i) => [point2.x, point2.y, point2.z].every(Number.isFinite) && (i === 0 || Math.hypot(
         point2.x - path[i - 1].x,
@@ -4492,9 +4509,9 @@ var cad_cable = z198.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z199 } from "zod";
-var wave_shape = z199.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z199.union([z199.string(), z199.number()]).transform((val) => {
+import { z as z200 } from "zod";
+var wave_shape = z200.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z200.union([z200.string(), z200.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4503,32 +4520,32 @@ var percentage = z199.union([z199.string(), z199.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z199.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z200.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z199.object({
-  type: z199.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z200.object({
+  type: z200.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z199.literal(true).optional().default(true),
-  positive_source_port_id: z199.string().optional(),
-  negative_source_port_id: z199.string().optional(),
-  positive_source_net_id: z199.string().optional(),
-  negative_source_net_id: z199.string().optional(),
+  is_dc_source: z200.literal(true).optional().default(true),
+  positive_source_port_id: z200.string().optional(),
+  negative_source_port_id: z200.string().optional(),
+  positive_source_net_id: z200.string().optional(),
+  negative_source_net_id: z200.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z199.object({
-  type: z199.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z200.object({
+  type: z200.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z199.literal(false),
-  terminal1_source_port_id: z199.string().optional(),
-  terminal2_source_port_id: z199.string().optional(),
-  terminal1_source_net_id: z199.string().optional(),
-  terminal2_source_net_id: z199.string().optional(),
+  is_dc_source: z200.literal(false),
+  terminal1_source_port_id: z200.string().optional(),
+  terminal2_source_port_id: z200.string().optional(),
+  terminal1_source_net_id: z200.string().optional(),
+  terminal2_source_net_id: z200.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4543,14 +4560,14 @@ var simulation_ac_voltage_source = z199.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z199.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z200.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z200 } from "zod";
-var percentage2 = z200.union([z200.string(), z200.number()]).transform((val) => {
+import { z as z201 } from "zod";
+var percentage2 = z201.union([z201.string(), z201.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4559,32 +4576,32 @@ var percentage2 = z200.union([z200.string(), z200.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z200.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z201.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z200.object({
-  type: z200.literal("simulation_current_source"),
+var simulation_dc_current_source = z201.object({
+  type: z201.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z200.literal(true).optional().default(true),
-  positive_source_port_id: z200.string().optional(),
-  negative_source_port_id: z200.string().optional(),
-  positive_source_net_id: z200.string().optional(),
-  negative_source_net_id: z200.string().optional(),
+  is_dc_source: z201.literal(true).optional().default(true),
+  positive_source_port_id: z201.string().optional(),
+  negative_source_port_id: z201.string().optional(),
+  positive_source_net_id: z201.string().optional(),
+  negative_source_net_id: z201.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z200.object({
-  type: z200.literal("simulation_current_source"),
+var simulation_ac_current_source = z201.object({
+  type: z201.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z200.literal(false),
-  terminal1_source_port_id: z200.string().optional(),
-  terminal2_source_port_id: z200.string().optional(),
-  terminal1_source_net_id: z200.string().optional(),
-  terminal2_source_net_id: z200.string().optional(),
+  is_dc_source: z201.literal(false),
+  terminal1_source_port_id: z201.string().optional(),
+  terminal2_source_port_id: z201.string().optional(),
+  terminal1_source_net_id: z201.string().optional(),
+  terminal2_source_net_id: z201.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4594,58 +4611,58 @@ var simulation_ac_current_source = z200.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z200.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z201.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z202 } from "zod";
+import { z as z203 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z201 } from "zod";
-var simulation_dc_sweep_unit = z201.custom(
+import { z as z202 } from "zod";
+var simulation_dc_sweep_unit = z202.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z201.custom(
+var simulation_parameter_unit = z202.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z202.union([
-  z202.literal("spice_dc_sweep"),
-  z202.literal("spice_dc_operating_point"),
-  z202.literal("spice_transient_analysis"),
-  z202.literal("spice_ac_analysis")
+var experiment_type = z203.union([
+  z203.literal("spice_dc_sweep"),
+  z203.literal("spice_dc_operating_point"),
+  z203.literal("spice_transient_analysis"),
+  z203.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z202.object({
-  method: z202.enum(["trap", "gear"]).optional(),
-  reltol: z202.union([z202.number(), z202.string()]).optional(),
-  abstol: z202.union([z202.number(), z202.string()]).optional(),
-  vntol: z202.union([z202.number(), z202.string()]).optional()
+var spice_simulation_options = z203.object({
+  method: z203.enum(["trap", "gear"]).optional(),
+  reltol: z203.union([z203.number(), z203.string()]).optional(),
+  abstol: z203.union([z203.number(), z203.string()]).optional(),
+  vntol: z203.union([z203.number(), z203.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z202.object({
-  type: z202.literal("simulation_experiment"),
+var simulation_experiment = z203.object({
+  type: z203.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z202.string(),
+  name: z203.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z202.string().optional(),
-  dc_sweep_current_source_id: z202.string().optional(),
-  dc_sweep_start: z202.number().optional(),
-  dc_sweep_stop: z202.number().optional(),
-  dc_sweep_step: z202.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z203.string().optional(),
+  dc_sweep_current_source_id: z203.string().optional(),
+  dc_sweep_start: z203.number().optional(),
+  dc_sweep_stop: z203.number().optional(),
+  dc_sweep_step: z203.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z202.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z202.number().int().positive().optional(),
-  ac_sample_count: z202.number().int().positive().optional(),
-  ac_start_frequency_hz: z202.number().positive().optional(),
-  ac_stop_frequency_hz: z202.number().positive().optional()
+  ac_sweep_type: z203.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z203.number().int().positive().optional(),
+  ac_sample_count: z203.number().int().positive().optional(),
+  ac_start_frequency_hz: z203.number().positive().optional(),
+  ac_stop_frequency_hz: z203.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4657,7 +4674,7 @@ var simulation_experiment = z202.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z202.ZodIssueCode.custom,
+          code: z203.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4667,7 +4684,7 @@ var simulation_experiment = z202.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4676,35 +4693,35 @@ var simulation_experiment = z202.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z202.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4714,87 +4731,87 @@ var simulation_experiment = z202.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z204 } from "zod";
+import { z as z205 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z203 } from "zod";
-var simulation_parameter_sweep_coordinate = z203.object({
-  simulation_parameter_sweep_id: z203.string(),
-  sweep_index: z203.number().int().nonnegative(),
-  parameter_value: z203.number(),
+import { z as z204 } from "zod";
+var simulation_parameter_sweep_coordinate = z204.object({
+  simulation_parameter_sweep_id: z204.string(),
+  sweep_index: z204.number().int().nonnegative(),
+  parameter_value: z204.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z204.object({
-  type: z204.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z205.object({
+  type: z205.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z204.string(),
+  simulation_experiment_id: z205.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z204.array(z204.number()).optional(),
-  voltage_levels: z204.array(z204.number()),
-  source_component_id: z204.string().optional(),
-  subcircuit_connectivity_map_key: z204.string().optional(),
+  timestamps_ms: z205.array(z205.number()).optional(),
+  voltage_levels: z205.array(z205.number()),
+  source_component_id: z205.string().optional(),
+  subcircuit_connectivity_map_key: z205.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z204.string().optional(),
-  color: z204.string().optional()
+  name: z205.string().optional(),
+  color: z205.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z205 } from "zod";
-var simulation_transient_current_graph = z205.object({
-  type: z205.literal("simulation_transient_current_graph"),
+import { z as z206 } from "zod";
+var simulation_transient_current_graph = z206.object({
+  type: z206.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z205.string(),
+  simulation_experiment_id: z206.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z205.array(z205.number()).optional(),
-  current_levels: z205.array(z205.number()),
-  source_component_id: z205.string().optional(),
-  subcircuit_connectivity_map_key: z205.string().optional(),
+  timestamps_ms: z206.array(z206.number()).optional(),
+  current_levels: z206.array(z206.number()),
+  source_component_id: z206.string().optional(),
+  subcircuit_connectivity_map_key: z206.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z205.string().optional(),
-  color: z205.string().optional()
+  name: z206.string().optional(),
+  color: z206.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z206 } from "zod";
-var simulation_switch = z206.object({
-  type: z206.literal("simulation_switch"),
+import { z as z207 } from "zod";
+var simulation_switch = z207.object({
+  type: z207.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z206.string().optional(),
+  source_component_id: z207.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z206.boolean().optional(),
+  starts_closed: z207.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z207 } from "zod";
-var simulation_voltage_probe = z207.object({
-  type: z207.literal("simulation_voltage_probe"),
+import { z as z208 } from "zod";
+var simulation_voltage_probe = z208.object({
+  type: z208.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z207.string().optional(),
-  name: z207.string().optional(),
-  signal_input_source_port_id: z207.string().optional(),
-  signal_input_source_net_id: z207.string().optional(),
-  reference_input_source_port_id: z207.string().optional(),
-  reference_input_source_net_id: z207.string().optional(),
-  subcircuit_id: z207.string().optional(),
-  color: z207.string().optional()
+  source_component_id: z208.string().optional(),
+  name: z208.string().optional(),
+  signal_input_source_port_id: z208.string().optional(),
+  signal_input_source_net_id: z208.string().optional(),
+  reference_input_source_port_id: z208.string().optional(),
+  reference_input_source_net_id: z208.string().optional(),
+  subcircuit_id: z208.string().optional(),
+  color: z208.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4804,20 +4821,20 @@ var simulation_voltage_probe = z207.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z207.ZodIssueCode.custom,
+        code: z208.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z207.ZodIssueCode.custom,
+          code: z208.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z207.ZodIssueCode.custom,
+          code: z208.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4825,7 +4842,7 @@ var simulation_voltage_probe = z207.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z207.ZodIssueCode.custom,
+        code: z208.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4834,20 +4851,20 @@ var simulation_voltage_probe = z207.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z208 } from "zod";
-var simulation_current_probe = z208.object({
-  type: z208.literal("simulation_current_probe"),
+import { z as z209 } from "zod";
+var simulation_current_probe = z209.object({
+  type: z209.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z208.string().optional(),
-  name: z208.string().optional(),
-  positive_source_port_id: z208.string().optional(),
-  negative_source_port_id: z208.string().optional(),
-  positive_source_net_id: z208.string().optional(),
-  negative_source_net_id: z208.string().optional(),
-  subcircuit_id: z208.string().optional(),
-  color: z208.string().optional()
+  source_component_id: z209.string().optional(),
+  name: z209.string().optional(),
+  positive_source_port_id: z209.string().optional(),
+  negative_source_port_id: z209.string().optional(),
+  positive_source_net_id: z209.string().optional(),
+  negative_source_net_id: z209.string().optional(),
+  subcircuit_id: z209.string().optional(),
+  color: z209.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -4859,7 +4876,7 @@ var simulation_current_probe = z208.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z208.ZodIssueCode.custom,
+      code: z209.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -4867,7 +4884,7 @@ var simulation_current_probe = z208.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z208.ZodIssueCode.custom,
+        code: z209.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -4876,71 +4893,71 @@ var simulation_current_probe = z208.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z208.ZodIssueCode.custom,
+        code: z209.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z208.ZodIssueCode.custom,
+    code: z209.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z209 } from "zod";
+import { z as z210 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z209.literal("simulation_unknown_experiment_error"),
+  type: z210.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z209.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z209.string().optional(),
-  subcircuit_id: z209.string().optional()
+  error_type: z210.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z210.string().optional(),
+  subcircuit_id: z210.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z210 } from "zod";
-var simulation_parameter_type = z210.enum([
+import { z as z211 } from "zod";
+var simulation_parameter_type = z211.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z210.object({
-  type: z210.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z211.object({
+  type: z211.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z210.string(),
-  name: z210.string().optional(),
-  parameter_values: z210.array(z210.number()).min(1),
+  simulation_experiment_id: z211.string(),
+  name: z211.string().optional(),
+  parameter_values: z211.array(z211.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z210.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z211.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z210.literal("resistance"),
-    resistor_source_component_id: z210.string()
+    parameter_type: z211.literal("resistance"),
+    resistor_source_component_id: z211.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z210.literal("capacitance"),
-    capacitor_source_component_id: z210.string()
+    parameter_type: z211.literal("capacitance"),
+    capacitor_source_component_id: z211.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z210.literal("inductance"),
-    inductor_source_component_id: z210.string()
+    parameter_type: z211.literal("inductance"),
+    inductor_source_component_id: z211.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z210.literal("voltage"),
-    source_net_id: z210.string()
+    parameter_type: z211.literal("voltage"),
+    source_net_id: z211.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z210.literal("current"),
-    current_source_component_id: z210.string()
+    parameter_type: z211.literal("current"),
+    current_source_component_id: z211.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4948,52 +4965,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z211 } from "zod";
-var simulation_dc_operating_point_voltage = z211.object({
-  type: z211.literal("simulation_dc_operating_point_voltage"),
+import { z as z212 } from "zod";
+var simulation_dc_operating_point_voltage = z212.object({
+  type: z212.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z211.string(),
+  simulation_experiment_id: z212.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z211.string(),
-  voltage: z211.number(),
-  name: z211.string().optional(),
-  color: z211.string().optional()
+  simulation_voltage_probe_id: z212.string(),
+  voltage: z212.number(),
+  name: z212.string().optional(),
+  color: z212.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z212 } from "zod";
-var simulation_dc_operating_point_current = z212.object({
-  type: z212.literal("simulation_dc_operating_point_current"),
+import { z as z213 } from "zod";
+var simulation_dc_operating_point_current = z213.object({
+  type: z213.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z212.string(),
+  simulation_experiment_id: z213.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z212.string(),
-  current: z212.number(),
-  name: z212.string().optional(),
-  color: z212.string().optional()
+  simulation_current_probe_id: z213.string(),
+  current: z213.number(),
+  name: z213.string().optional(),
+  color: z213.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z213 } from "zod";
-var simulation_dc_sweep_voltage_graph = z213.object({
-  type: z213.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z214 } from "zod";
+var simulation_dc_sweep_voltage_graph = z214.object({
+  type: z214.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z213.string(),
+  simulation_experiment_id: z214.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z213.string(),
-  sweep_values: z213.array(z213.number()),
+  simulation_voltage_probe_id: z214.string(),
+  sweep_values: z214.array(z214.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z213.array(z213.number()),
-  name: z213.string().optional(),
-  color: z213.string().optional()
+  voltage_levels: z214.array(z214.number()),
+  name: z214.string().optional(),
+  color: z214.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -5003,20 +5020,20 @@ var simulation_dc_sweep_voltage_graph = z213.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z214 } from "zod";
-var simulation_dc_sweep_current_graph = z214.object({
-  type: z214.literal("simulation_dc_sweep_current_graph"),
+import { z as z215 } from "zod";
+var simulation_dc_sweep_current_graph = z215.object({
+  type: z215.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z214.string(),
+  simulation_experiment_id: z215.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z214.string(),
-  sweep_values: z214.array(z214.number()),
+  simulation_current_probe_id: z215.string(),
+  sweep_values: z215.array(z215.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z214.array(z214.number()),
-  name: z214.string().optional(),
-  color: z214.string().optional()
+  current_levels: z215.array(z215.number()),
+  name: z215.string().optional(),
+  color: z215.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -5026,29 +5043,29 @@ var simulation_dc_sweep_current_graph = z214.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z216 } from "zod";
+import { z as z217 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z215 } from "zod";
-var simulation_complex_sample = z215.object({
-  re: z215.number(),
-  im: z215.number()
+import { z as z216 } from "zod";
+var simulation_complex_sample = z216.object({
+  re: z216.number(),
+  im: z216.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z216.object({
-  type: z216.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z217.object({
+  type: z217.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z216.string(),
+  simulation_experiment_id: z217.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z216.string(),
-  frequencies_hz: z216.array(z216.number()),
-  complex_voltages: z216.array(simulation_complex_sample),
-  name: z216.string().optional(),
-  color: z216.string().optional()
+  simulation_voltage_probe_id: z217.string(),
+  frequencies_hz: z217.array(z217.number()),
+  complex_voltages: z217.array(simulation_complex_sample),
+  name: z217.string().optional(),
+  color: z217.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -5058,19 +5075,19 @@ var simulation_ac_sweep_voltage_graph = z216.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z217 } from "zod";
-var simulation_ac_sweep_current_graph = z217.object({
-  type: z217.literal("simulation_ac_sweep_current_graph"),
+import { z as z218 } from "zod";
+var simulation_ac_sweep_current_graph = z218.object({
+  type: z218.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z217.string(),
+  simulation_experiment_id: z218.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z217.string(),
-  frequencies_hz: z217.array(z217.number()),
-  complex_currents: z217.array(simulation_complex_sample),
-  name: z217.string().optional(),
-  color: z217.string().optional()
+  simulation_current_probe_id: z218.string(),
+  frequencies_hz: z218.array(z218.number()),
+  complex_currents: z218.array(simulation_complex_sample),
+  name: z218.string().optional(),
+  color: z218.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -5080,52 +5097,52 @@ var simulation_ac_sweep_current_graph = z217.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z218 } from "zod";
-var simulation_op_amp = z218.object({
-  type: z218.literal("simulation_op_amp"),
+import { z as z219 } from "zod";
+var simulation_op_amp = z219.object({
+  type: z219.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z218.string().optional(),
-  inverting_input_source_port_id: z218.string(),
-  non_inverting_input_source_port_id: z218.string(),
-  output_source_port_id: z218.string(),
-  positive_supply_source_port_id: z218.string(),
-  negative_supply_source_port_id: z218.string()
+  source_component_id: z219.string().optional(),
+  inverting_input_source_port_id: z219.string(),
+  non_inverting_input_source_port_id: z219.string(),
+  output_source_port_id: z219.string(),
+  positive_supply_source_port_id: z219.string(),
+  negative_supply_source_port_id: z219.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z219 } from "zod";
-var simulation_spice_subcircuit = z219.object({
-  type: z219.literal("simulation_spice_subcircuit"),
+import { z as z220 } from "zod";
+var simulation_spice_subcircuit = z220.object({
+  type: z220.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z219.string(),
-  spice_pin_to_source_port_map: z219.record(z219.string(), z219.string()),
-  subcircuit_source: z219.string()
+  source_component_id: z220.string(),
+  spice_pin_to_source_port_map: z220.record(z220.string(), z220.string()),
+  subcircuit_source: z220.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z220 } from "zod";
+import { z as z221 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z220.object({
-  type: z220.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z221.object({
+  type: z221.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z220.string().optional(),
-  simulation_transient_current_graph_id: z220.string().optional(),
-  simulation_voltage_probe_id: z220.string().optional(),
-  simulation_current_probe_id: z220.string().optional(),
-  display_name: z220.string().optional(),
-  color: z220.string().optional(),
-  display_center_value: z220.number().optional(),
-  display_center_offset_divs: z220.number().optional(),
-  volts_per_div: z220.number().positive().optional(),
-  amps_per_div: z220.number().positive().optional()
+  simulation_transient_voltage_graph_id: z221.string().optional(),
+  simulation_transient_current_graph_id: z221.string().optional(),
+  simulation_voltage_probe_id: z221.string().optional(),
+  simulation_current_probe_id: z221.string().optional(),
+  display_name: z221.string().optional(),
+  color: z221.string().optional(),
+  display_center_value: z221.number().optional(),
+  display_center_offset_divs: z221.number().optional(),
+  volts_per_div: z221.number().positive().optional(),
+  amps_per_div: z221.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -5139,19 +5156,19 @@ var simulation_oscilloscope_trace = z220.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z220.ZodIssueCode.custom,
+      code: z221.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z220.ZodIssueCode.custom,
+      code: z221.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z220.ZodIssueCode.custom,
+      code: z221.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -5159,8 +5176,8 @@ var simulation_oscilloscope_trace = z220.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z221 } from "zod";
-var any_circuit_element = z221.union([
+import { z as z222 } from "zod";
+var any_circuit_element = z222.union([
   source_runtime_error,
   source_trace,
   source_bus,
@@ -5309,6 +5326,7 @@ var any_circuit_element = z221.union([
   schematic_manual_edit_conflict_warning,
   schematic_component_overlap_warning,
   schematic_component_styling_warning,
+  schematic_sheet_styling_warning,
   schematic_missing_sheet_warning,
   schematic_element_outside_sheet_warning,
   schematic_graphic,
@@ -5544,6 +5562,7 @@ export {
   schematic_rect,
   schematic_sheet,
   schematic_sheet_size,
+  schematic_sheet_styling_warning,
   schematic_symbol,
   schematic_table,
   schematic_table_cell,