circuit-json 0.0.516 → 0.0.518

package/README.md

@@ -779,6 +779,8 @@ interface SourcePinAttributes {
   requires_ground?: boolean
   provides_voltage?: number
   requires_voltage?: number
+  /** Allowed relative deviation from requires_voltage, e.g. 0.05 for ±5%. */
+  required_voltage_tolerance?: number
   do_not_connect?: boolean
   include_in_board_pinout?: boolean
   can_use_internal_pullup?: boolean
@@ -2066,6 +2068,10 @@ interface PcbFabricationNotePath {
   route: Point[]
   stroke_width: Length
   color?: string
+  /** Fill the route as a closed polygon using color. Defaults to false. */
+  is_filled?: boolean
+  /** Draw the outline using stroke_width and color. Defaults to true. */
+  has_stroke?: boolean
 }
 ```
 

package/dist/index.d.mts

@@ -12260,6 +12260,8 @@ declare const pcb_fabrication_note_path: z.ZodObject<{
     }>, "many">;
     stroke_width: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
     color: z.ZodOptional<z.ZodString>;
+    is_filled: z.ZodOptional<z.ZodBoolean>;
+    has_stroke: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_fabrication_note_path";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -12271,6 +12273,8 @@ declare const pcb_fabrication_note_path: z.ZodObject<{
     stroke_width: number;
     pcb_fabrication_note_path_id: string;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
 }, {
     type: "pcb_fabrication_note_path";
@@ -12284,6 +12288,8 @@ declare const pcb_fabrication_note_path: z.ZodObject<{
     }[];
     stroke_width: string | number;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
     pcb_fabrication_note_path_id?: string | undefined;
 }>;
@@ -12300,6 +12306,10 @@ interface PcbFabricationNotePath {
     route: Point[];
     stroke_width: Length;
     color?: string;
+    /** Fill the route as a closed polygon using color. Defaults to false. */
+    is_filled?: boolean;
+    /** Draw the outline using stroke_width and color. Defaults to true. */
+    has_stroke?: boolean;
 }
 /**
  * @deprecated use PcbFabricationNotePath
@@ -32372,6 +32382,7 @@ declare const source_pin_attributes: z.ZodObject<{
     requires_ground: z.ZodOptional<z.ZodBoolean>;
     provides_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
     requires_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
+    required_voltage_tolerance: z.ZodOptional<z.ZodNumber>;
     do_not_connect: z.ZodOptional<z.ZodBoolean>;
     include_in_board_pinout: z.ZodOptional<z.ZodBoolean>;
     can_use_internal_pullup: z.ZodOptional<z.ZodBoolean>;
@@ -32422,6 +32433,7 @@ declare const source_pin_attributes: z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: number | undefined;
     requires_voltage?: number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -32472,6 +32484,7 @@ declare const source_pin_attributes: z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: string | number | undefined;
     requires_voltage?: string | number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -32524,6 +32537,8 @@ interface SourcePinAttributes {
     requires_ground?: boolean;
     provides_voltage?: number;
     requires_voltage?: number;
+    /** Allowed relative deviation from requires_voltage, e.g. 0.05 for ±5%. */
+    required_voltage_tolerance?: number;
     do_not_connect?: boolean;
     include_in_board_pinout?: boolean;
     can_use_internal_pullup?: boolean;
@@ -35808,6 +35823,7 @@ declare const source_port: z.ZodObject<{
     requires_ground: z.ZodOptional<z.ZodBoolean>;
     provides_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
     requires_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
+    required_voltage_tolerance: z.ZodOptional<z.ZodNumber>;
     do_not_connect: z.ZodOptional<z.ZodBoolean>;
     include_in_board_pinout: z.ZodOptional<z.ZodBoolean>;
     can_use_internal_pullup: z.ZodOptional<z.ZodBoolean>;
@@ -35867,6 +35883,7 @@ declare const source_port: z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: number | undefined;
     requires_voltage?: number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -35927,6 +35944,7 @@ declare const source_port: z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: string | number | undefined;
     requires_voltage?: string | number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -40088,6 +40106,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     requires_ground: z.ZodOptional<z.ZodBoolean>;
     provides_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
     requires_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
+    required_voltage_tolerance: z.ZodOptional<z.ZodNumber>;
     do_not_connect: z.ZodOptional<z.ZodBoolean>;
     include_in_board_pinout: z.ZodOptional<z.ZodBoolean>;
     can_use_internal_pullup: z.ZodOptional<z.ZodBoolean>;
@@ -40147,6 +40166,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: number | undefined;
     requires_voltage?: number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -40207,6 +40227,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: string | number | undefined;
     requires_voltage?: string | number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -50678,6 +50699,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     }>, "many">;
     stroke_width: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
     color: z.ZodOptional<z.ZodString>;
+    is_filled: z.ZodOptional<z.ZodBoolean>;
+    has_stroke: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_fabrication_note_path";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -50689,6 +50712,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     stroke_width: number;
     pcb_fabrication_note_path_id: string;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
 }, {
     type: "pcb_fabrication_note_path";
@@ -50702,6 +50727,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     }[];
     stroke_width: string | number;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
     pcb_fabrication_note_path_id?: string | undefined;
 }>, z.ZodObject<{
@@ -62665,6 +62692,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     requires_ground: z.ZodOptional<z.ZodBoolean>;
     provides_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
     requires_voltage: z.ZodOptional<z.ZodType<number, z.ZodTypeDef, string | number>>;
+    required_voltage_tolerance: z.ZodOptional<z.ZodNumber>;
     do_not_connect: z.ZodOptional<z.ZodBoolean>;
     include_in_board_pinout: z.ZodOptional<z.ZodBoolean>;
     can_use_internal_pullup: z.ZodOptional<z.ZodBoolean>;
@@ -62724,6 +62752,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: number | undefined;
     requires_voltage?: number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -62784,6 +62813,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     requires_ground?: boolean | undefined;
     provides_voltage?: string | number | undefined;
     requires_voltage?: string | number | undefined;
+    required_voltage_tolerance?: number | undefined;
     do_not_connect?: boolean | undefined;
     include_in_board_pinout?: boolean | undefined;
     can_use_internal_pullup?: boolean | undefined;
@@ -73255,6 +73285,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     }>, "many">;
     stroke_width: z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>;
     color: z.ZodOptional<z.ZodString>;
+    is_filled: z.ZodOptional<z.ZodBoolean>;
+    has_stroke: z.ZodOptional<z.ZodBoolean>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_fabrication_note_path";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -73266,6 +73298,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     stroke_width: number;
     pcb_fabrication_note_path_id: string;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
 }, {
     type: "pcb_fabrication_note_path";
@@ -73279,6 +73313,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     }[];
     stroke_width: string | number;
     subcircuit_id?: string | undefined;
+    is_filled?: boolean | undefined;
+    has_stroke?: boolean | undefined;
     color?: string | undefined;
     pcb_fabrication_note_path_id?: string | undefined;
 }>, z.ZodObject<{

package/dist/index.mjs

@@ -507,6 +507,7 @@ var source_pin_attributes = z29.object({
   requires_ground: z29.boolean().optional(),
   provides_voltage: pin_voltage.optional(),
   requires_voltage: pin_voltage.optional(),
+  required_voltage_tolerance: z29.number().finite().min(0).max(1).optional(),
   do_not_connect: z29.boolean().optional(),
   include_in_board_pinout: z29.boolean().optional(),
   can_use_internal_pullup: z29.boolean().optional(),
@@ -3488,7 +3489,9 @@ var pcb_fabrication_note_path = z154.object({
   layer: layer_ref,
   route: z154.array(point),
   stroke_width: length,
-  color: z154.string().optional()
+  color: z154.string().optional(),
+  is_filled: z154.boolean().optional(),
+  has_stroke: z154.boolean().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );