circuit-json 0.0.513 → 0.0.514

package/dist/index.mjs

@@ -1207,12 +1207,43 @@ expectTypesMatch(true);
 
 // src/source/source_bus.ts
 import { z as z74 } from "zod";
+var route_length = z74.union([
+  z74.number().nonnegative().finite(),
+  z74.object({
+    reference: z74.literal("longest_manhattan"),
+    source_trace_ids: z74.array(z74.string()).min(1).optional(),
+    offset: z74.number().finite().optional()
+  })
+]);
+var trace_spacing = z74.union([
+  z74.number().positive().finite(),
+  z74.object({ width_multiplier: z74.number().positive().finite() })
+]);
 var source_bus = z74.object({
   type: z74.literal("source_bus"),
   source_bus_id: z74.string(),
   name: z74.string().optional(),
   source_trace_ids: z74.array(z74.string()).min(1),
   max_length_skew: z74.number().nonnegative().finite().optional(),
+  target_impedance: z74.number().positive().finite().optional(),
+  target_differential_impedance: z74.number().positive().finite().optional(),
+  differential_pair: z74.object({
+    positive_source_trace_id: z74.string(),
+    negative_source_trace_id: z74.string(),
+    trace_gap: z74.number().positive().finite().optional(),
+    max_uncoupled_length: z74.number().nonnegative().finite().optional()
+  }).optional(),
+  length_match_source_trace_ids: z74.array(z74.string()).min(1).optional(),
+  min_length: route_length.optional(),
+  max_length: route_length.optional(),
+  target_length: route_length.optional(),
+  length_tolerance: z74.number().nonnegative().finite().optional(),
+  pcb_trace_spacing: trace_spacing.optional(),
+  pcb_spacing_to_other_signals: trace_spacing.optional(),
+  target_impedance_min: z74.number().positive().finite().optional(),
+  target_impedance_max: z74.number().positive().finite().optional(),
+  target_differential_impedance_min: z74.number().positive().finite().optional(),
+  target_differential_impedance_max: z74.number().positive().finite().optional(),
   subcircuit_id: z74.string().optional()
 });
 expectTypesMatch(true);
@@ -2824,107 +2855,209 @@ var pcb_trace_too_many_vias_warning = z124.object({
 );
 expectTypesMatch(true);
 
-// src/pcb/pcb_trace_error.ts
+// src/pcb/pcb_bus_routing_constraint_error.ts
 import { z as z125 } from "zod";
+var error_base = base_circuit_json_error.extend({
+  type: z125.literal("pcb_bus_routing_constraint_error"),
+  pcb_bus_routing_constraint_error_id: getZodPrefixedIdWithDefault(
+    "pcb_bus_routing_constraint_error"
+  ),
+  error_type: z125.literal("pcb_bus_routing_constraint_error").default("pcb_bus_routing_constraint_error"),
+  source_bus_id: z125.string(),
+  source_trace_ids: z125.array(z125.string()).min(1),
+  pcb_trace_ids: z125.array(z125.string()),
+  subcircuit_id: z125.string().optional()
+});
+var pcb_bus_routing_constraint_error = z125.discriminatedUnion("routing_rule", [
+  error_base.extend({
+    routing_rule: z125.literal("length_skew"),
+    actual_length_skew: z125.number().nonnegative().finite(),
+    maximum_length_skew: z125.number().nonnegative().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("min_length"),
+    actual_trace_length: z125.number().nonnegative().finite(),
+    minimum_trace_length: z125.number().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("max_length"),
+    actual_trace_length: z125.number().nonnegative().finite(),
+    maximum_trace_length: z125.number().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("target_length"),
+    actual_trace_length: z125.number().nonnegative().finite(),
+    target_trace_length: z125.number().finite(),
+    length_tolerance: z125.number().nonnegative().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("pcb_trace_spacing"),
+    other_pcb_trace_id: z125.string(),
+    other_source_trace_id: z125.string().optional(),
+    actual_centerline_spacing: z125.number().nonnegative().finite(),
+    minimum_centerline_spacing: z125.number().positive().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("pcb_spacing_to_other_signals"),
+    other_pcb_trace_id: z125.string(),
+    other_source_trace_id: z125.string().optional(),
+    actual_centerline_spacing: z125.number().nonnegative().finite(),
+    minimum_centerline_spacing: z125.number().positive().finite()
+  }),
+  error_base.extend({
+    routing_rule: z125.literal("impedance_target"),
+    target_impedance: z125.number().positive().finite(),
+    minimum_impedance: z125.number().positive().finite().optional(),
+    maximum_impedance: z125.number().positive().finite().optional()
+  })
+]).superRefine((error, ctx) => {
+  if (error.routing_rule !== "impedance_target") return;
+  if (error.minimum_impedance === void 0 && error.maximum_impedance === void 0)
+    ctx.addIssue({
+      code: z125.ZodIssueCode.custom,
+      path: ["minimum_impedance"],
+      message: "Provide an impedance bound"
+    });
+  if (error.minimum_impedance !== void 0 && error.maximum_impedance !== void 0 && error.minimum_impedance > error.maximum_impedance)
+    ctx.addIssue({
+      code: z125.ZodIssueCode.custom,
+      path: ["maximum_impedance"],
+      message: "Impedance bounds must be ordered"
+    });
+}).describe(
+  "A declared bus or differential-pair routing constraint is violated."
+);
+expectTypesMatch(true);
+
+// src/pcb/pcb_bus_routing_constraint_warning.ts
+import { z as z126 } from "zod";
+var warning_base = z126.object({
+  type: z126.literal("pcb_bus_routing_constraint_warning"),
+  pcb_bus_routing_constraint_warning_id: getZodPrefixedIdWithDefault(
+    "pcb_bus_routing_constraint_warning"
+  ),
+  warning_type: z126.literal("pcb_bus_routing_constraint_warning").default("pcb_bus_routing_constraint_warning"),
+  source_bus_id: z126.string(),
+  source_trace_ids: z126.array(z126.string()).min(1),
+  pcb_trace_ids: z126.array(z126.string()),
+  message: z126.string(),
+  subcircuit_id: z126.string().optional()
+}).describe(
+  "A declared bus or pair constraint could not be verified; this is not a pass."
+);
+var pcb_bus_routing_constraint_warning = z126.discriminatedUnion(
+  "routing_rule",
+  [
+    warning_base.extend({ routing_rule: z126.literal("route_geometry") }),
+    warning_base.extend({ routing_rule: z126.literal("reference_geometry") }),
+    warning_base.extend({ routing_rule: z126.literal("spacing_geometry") }),
+    warning_base.extend({ routing_rule: z126.literal("target_length") }),
+    warning_base.extend({ routing_rule: z126.literal("physical_impedance") })
+  ]
+);
+expectTypesMatch(true);
+
+// src/pcb/pcb_trace_error.ts
+import { z as z127 } from "zod";
 var pcb_trace_error = base_circuit_json_error.extend({
-  type: z125.literal("pcb_trace_error"),
+  type: z127.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z125.literal("pcb_trace_error").default("pcb_trace_error"),
+  error_type: z127.literal("pcb_trace_error").default("pcb_trace_error"),
   center: point.optional(),
-  pcb_trace_id: z125.string(),
-  source_trace_id: z125.string(),
-  pcb_component_ids: z125.array(z125.string()),
-  pcb_port_ids: z125.array(z125.string()),
-  subcircuit_id: z125.string().optional()
+  pcb_trace_id: z127.string(),
+  source_trace_id: z127.string(),
+  pcb_component_ids: z127.array(z127.string()),
+  pcb_port_ids: z127.array(z127.string()),
+  subcircuit_id: z127.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z126 } from "zod";
+import { z as z128 } from "zod";
 var pcb_trace_missing_error = base_circuit_json_error.extend({
-  type: z126.literal("pcb_trace_missing_error"),
+  type: z128.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z126.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  error_type: z128.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
   center: point.optional(),
-  source_trace_id: z126.string(),
-  pcb_component_ids: z126.array(z126.string()),
-  pcb_port_ids: z126.array(z126.string()),
-  subcircuit_id: z126.string().optional()
+  source_trace_id: z128.string(),
+  pcb_component_ids: z128.array(z128.string()),
+  pcb_port_ids: z128.array(z128.string()),
+  subcircuit_id: z128.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z127 } from "zod";
+import { z as z129 } from "zod";
 var pcb_port_not_matched_error = base_circuit_json_error.extend({
-  type: z127.literal("pcb_port_not_matched_error"),
+  type: z129.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z127.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  pcb_component_ids: z127.array(z127.string()),
-  subcircuit_id: z127.string().optional()
+  error_type: z129.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  pcb_component_ids: z129.array(z129.string()),
+  subcircuit_id: z129.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z128 } from "zod";
+import { z as z130 } from "zod";
 var pcb_port_not_connected_error = base_circuit_json_error.extend({
-  type: z128.literal("pcb_port_not_connected_error"),
+  type: z130.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z128.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  pcb_port_ids: z128.array(z128.string()),
-  pcb_component_ids: z128.array(z128.string()),
-  subcircuit_id: z128.string().optional()
+  error_type: z130.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  pcb_port_ids: z130.array(z130.string()),
+  pcb_component_ids: z130.array(z130.string()),
+  subcircuit_id: z130.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_net.ts
-import { z as z129 } from "zod";
-var pcb_net = z129.object({
-  type: z129.literal("pcb_net"),
+import { z as z131 } from "zod";
+var pcb_net = z131.object({
+  type: z131.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z129.string().optional(),
-  highlight_color: z129.string().optional()
+  source_net_id: z131.string().optional(),
+  highlight_color: z131.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z130 } from "zod";
-var pcb_via = z130.object({
-  type: z130.literal("pcb_via"),
+import { z as z132 } from "zod";
+var pcb_via = z132.object({
+  type: z132.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z130.string().optional(),
-  subcircuit_id: z130.string().optional(),
-  subcircuit_connectivity_map_key: z130.string().optional(),
+  pcb_group_id: z132.string().optional(),
+  subcircuit_id: z132.string().optional(),
+  subcircuit_connectivity_map_key: z132.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
   hole_diameter: distance.default("0.25mm"),
   topmost_drill_layer: layer_ref.optional(),
   bottommost_drill_layer: layer_ref.optional(),
-  through_hole: z130.boolean().optional(),
+  through_hole: z132.boolean().optional(),
   /** @deprecated */
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z130.array(layer_ref),
+  layers: z132.array(layer_ref),
   /** PCB ports belonging to this via, including layer ports and aliases. */
-  pcb_port_ids: z130.array(z130.string()).optional(),
-  pcb_trace_id: z130.string().optional(),
-  source_trace_id: z130.string().optional(),
-  source_net_id: z130.string().min(1).optional(),
-  net_is_assignable: z130.boolean().optional(),
-  net_assigned: z130.boolean().optional(),
+  pcb_port_ids: z132.array(z132.string()).optional(),
+  pcb_trace_id: z132.string().optional(),
+  source_trace_id: z132.string().optional(),
+  source_net_id: z132.string().min(1).optional(),
+  net_is_assignable: z132.boolean().optional(),
+  net_assigned: z132.boolean().optional(),
   /** @deprecated Use tented_on_top and tented_on_bottom instead. */
-  is_tented: z130.boolean().optional(),
-  tented_on_top: z130.boolean().optional(),
-  tented_on_bottom: z130.boolean().optional()
+  is_tented: z132.boolean().optional(),
+  tented_on_top: z132.boolean().optional(),
+  tented_on_bottom: z132.boolean().optional()
 }).transform(({ is_tented, ...via }) => {
   if (is_tented !== void 0) {
     via.tented_on_top ??= is_tented;
@@ -2935,62 +3068,62 @@ var pcb_via = z130.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z131 } from "zod";
-var pcb_board = z131.object({
-  type: z131.literal("pcb_board"),
+import { z as z133 } from "zod";
+var pcb_board = z133.object({
+  type: z133.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z131.string().optional(),
-  carrier_pcb_board_id: z131.string().optional(),
-  is_subcircuit: z131.boolean().optional(),
-  subcircuit_id: z131.string().optional(),
-  is_mounted_to_carrier_board: z131.boolean().optional(),
-  is_via_in_pad_allowed: z131.boolean().optional(),
-  default_via_tented_on_top: z131.boolean().optional(),
-  default_via_tented_on_bottom: z131.boolean().optional(),
-  default_via_plugged: z131.boolean().optional(),
+  pcb_panel_id: z133.string().optional(),
+  carrier_pcb_board_id: z133.string().optional(),
+  is_subcircuit: z133.boolean().optional(),
+  subcircuit_id: z133.string().optional(),
+  is_mounted_to_carrier_board: z133.boolean().optional(),
+  is_via_in_pad_allowed: z133.boolean().optional(),
+  default_via_tented_on_top: z133.boolean().optional(),
+  default_via_tented_on_bottom: z133.boolean().optional(),
+  default_via_plugged: z133.boolean().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z131.string().optional().describe(
+  display_offset_x: z133.string().optional().describe(
     "How to display the x offset for this board, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z131.string().optional().describe(
+  display_offset_y: z133.string().optional().describe(
     "How to display the y offset for this board, usually corresponding with how the user specified it"
   ),
   thickness: length.optional().default(1.4),
-  num_layers: z131.number().optional().default(4),
-  allow_blind_and_buried_vias: z131.boolean().optional().describe(
+  num_layers: z133.number().optional().default(4),
+  allow_blind_and_buried_vias: z133.boolean().optional().describe(
     "Whether autorouters may generate blind and buried vias. False restricts newly generated vias to the full board stack."
   ),
-  outline: z131.array(point).optional(),
-  shape: z131.enum(["rect", "polygon"]).optional(),
-  material: z131.enum(["fr4", "fr1", "flex"]).default("fr4"),
-  solder_mask_color: z131.string().optional(),
-  silkscreen_color: z131.string().optional(),
+  outline: z133.array(point).optional(),
+  shape: z133.enum(["rect", "polygon"]).optional(),
+  material: z133.enum(["fr4", "fr1", "flex"]).default("fr4"),
+  solder_mask_color: z133.string().optional(),
+  silkscreen_color: z133.string().optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  position_mode: z131.enum(["relative_to_panel_anchor", "none"]).optional()
+  position_mode: z133.enum(["relative_to_panel_anchor", "none"]).optional()
 }).merge(manufacturing_drc_properties).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_bend.ts
-import { z as z132 } from "zod";
+import { z as z134 } from "zod";
 var finite_point = point.extend({
-  x: length.pipe(z132.number().finite()),
-  y: length.pipe(z132.number().finite())
+  x: length.pipe(z134.number().finite()),
+  y: length.pipe(z134.number().finite())
 });
-var pcb_bend = z132.object({
-  type: z132.literal("pcb_bend"),
+var pcb_bend = z134.object({
+  type: z134.literal("pcb_bend"),
   pcb_bend_id: getZodPrefixedIdWithDefault("pcb_bend"),
-  pcb_board_id: z132.string(),
-  pcb_group_id: z132.string().optional(),
-  subcircuit_id: z132.string().optional(),
-  name: z132.string().optional(),
+  pcb_board_id: z134.string(),
+  pcb_group_id: z134.string().optional(),
+  subcircuit_id: z134.string().optional(),
+  name: z134.string().optional(),
   start: finite_point,
   end: finite_point,
-  bend_angle: rotation.pipe(z132.number().finite()),
-  bend_radius: length.pipe(z132.number().finite().positive()),
-  bend_side: z132.enum(["left", "right"])
+  bend_angle: rotation.pipe(z134.number().finite()),
+  bend_radius: length.pipe(z134.number().finite().positive()),
+  bend_side: z134.enum(["left", "right"])
 }).refine(({ start, end }) => start.x !== end.x || start.y !== end.y, {
   message: "Bend centerline endpoints must be distinct",
   path: ["end"]
@@ -3000,123 +3133,123 @@ var pcb_bend = z132.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_stiffener.ts
-import { z as z133 } from "zod";
-var positive_length = length.pipe(z133.number().finite().positive());
+import { z as z135 } from "zod";
+var positive_length = length.pipe(z135.number().finite().positive());
 var finite_point2 = point.extend({
-  x: length.pipe(z133.number().finite()),
-  y: length.pipe(z133.number().finite())
+  x: length.pipe(z135.number().finite()),
+  y: length.pipe(z135.number().finite())
 });
-var pcb_stiffener_base = z133.object({
-  type: z133.literal("pcb_stiffener"),
+var pcb_stiffener_base = z135.object({
+  type: z135.literal("pcb_stiffener"),
   pcb_stiffener_id: getZodPrefixedIdWithDefault("pcb_stiffener"),
-  pcb_board_id: z133.string(),
-  pcb_group_id: z133.string().optional(),
-  subcircuit_id: z133.string().optional(),
-  name: z133.string().optional(),
-  layer: z133.enum(["top", "bottom"]),
-  material: z133.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
+  pcb_board_id: z135.string(),
+  pcb_group_id: z135.string().optional(),
+  subcircuit_id: z135.string().optional(),
+  name: z135.string().optional(),
+  layer: z135.enum(["top", "bottom"]),
+  material: z135.enum(["fr4", "polyimide", "stainless_steel", "aluminum"]),
   thickness: positive_length,
-  adhesive_thickness: length.pipe(z133.number().finite().nonnegative()).optional()
+  adhesive_thickness: length.pipe(z135.number().finite().nonnegative()).optional()
 });
 var pcb_stiffener_rect = pcb_stiffener_base.extend({
-  shape: z133.literal("rect"),
+  shape: z135.literal("rect"),
   center: finite_point2,
-  rotation: rotation.pipe(z133.number().finite()).optional(),
+  rotation: rotation.pipe(z135.number().finite()).optional(),
   width: positive_length,
   height: positive_length,
-  outline: z133.never().optional()
+  outline: z135.never().optional()
 });
 expectTypesMatch(true);
 var pcb_stiffener_polygon = pcb_stiffener_base.extend({
-  shape: z133.literal("polygon"),
-  outline: z133.array(finite_point2).min(3).refine((points) => {
+  shape: z135.literal("polygon"),
+  outline: z135.array(finite_point2).min(3).refine((points) => {
     const twice_area = points.reduce((sum, p, i) => {
       const next = points[(i + 1) % points.length];
       return sum + p.x * next.y - next.x * p.y;
     }, 0);
     return Number.isFinite(twice_area) && twice_area !== 0;
   }, "Stiffener outline must enclose a nonzero area"),
-  center: z133.never().optional(),
-  rotation: z133.never().optional(),
-  width: z133.never().optional(),
-  height: z133.never().optional()
+  center: z135.never().optional(),
+  rotation: z135.never().optional(),
+  width: z135.never().optional(),
+  height: z135.never().optional()
 });
 expectTypesMatch(
   true
 );
-var pcb_stiffener = z133.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
+var pcb_stiffener = z135.discriminatedUnion("shape", [pcb_stiffener_rect, pcb_stiffener_polygon]).describe(
   "Defines bonded mechanical PCB reinforcement without adding copper layers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z134 } from "zod";
-var pcb_panel = z134.object({
-  type: z134.literal("pcb_panel"),
+import { z as z136 } from "zod";
+var pcb_panel = z136.object({
+  type: z136.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  covered_with_solder_mask: z134.boolean().optional().default(true)
+  covered_with_solder_mask: z136.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z135 } from "zod";
+import { z as z137 } from "zod";
 var pcb_placement_error = base_circuit_json_error.extend({
-  type: z135.literal("pcb_placement_error"),
+  type: z137.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z135.literal("pcb_placement_error").default("pcb_placement_error"),
-  subcircuit_id: z135.string().optional()
+  error_type: z137.literal("pcb_placement_error").default("pcb_placement_error"),
+  subcircuit_id: z137.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_packing_error.ts
-import { z as z136 } from "zod";
+import { z as z138 } from "zod";
 var pcb_packing_error = base_circuit_json_error.extend({
-  type: z136.literal("pcb_packing_error"),
+  type: z138.literal("pcb_packing_error"),
   pcb_packing_error_id: getZodPrefixedIdWithDefault("pcb_packing_error"),
-  error_type: z136.literal("pcb_packing_error").default("pcb_packing_error"),
-  pcb_group_id: z136.string().optional(),
-  subcircuit_id: z136.string().optional()
+  error_type: z138.literal("pcb_packing_error").default("pcb_packing_error"),
+  pcb_group_id: z138.string().optional(),
+  subcircuit_id: z138.string().optional()
 }).describe("Defines a failure to pack PCB components within layout bounds");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panelization_placement_error.ts
-import { z as z137 } from "zod";
+import { z as z139 } from "zod";
 var pcb_panelization_placement_error = base_circuit_json_error.extend({
-  type: z137.literal("pcb_panelization_placement_error"),
+  type: z139.literal("pcb_panelization_placement_error"),
   pcb_panelization_placement_error_id: getZodPrefixedIdWithDefault(
     "pcb_panelization_placement_error"
   ),
-  error_type: z137.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
-  pcb_panel_id: z137.string().optional(),
-  pcb_board_id: z137.string().optional(),
-  subcircuit_id: z137.string().optional()
+  error_type: z139.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
+  pcb_panel_id: z139.string().optional(),
+  pcb_board_id: z139.string().optional(),
+  subcircuit_id: z139.string().optional()
 }).describe("Defines a panelization placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z138 } from "zod";
-var pcb_trace_hint = z138.object({
-  type: z138.literal("pcb_trace_hint"),
+import { z as z140 } from "zod";
+var pcb_trace_hint = z140.object({
+  type: z140.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z138.string(),
-  pcb_component_id: z138.string(),
-  route: z138.array(route_hint_point),
-  subcircuit_id: z138.string().optional()
+  pcb_port_id: z140.string(),
+  pcb_component_id: z140.string(),
+  route: z140.array(route_hint_point),
+  subcircuit_id: z140.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z139 } from "zod";
-var pcb_silkscreen_line = z139.object({
-  type: z139.literal("pcb_silkscreen_line"),
+import { z as z141 } from "zod";
+var pcb_silkscreen_line = z141.object({
+  type: z141.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z139.string(),
-  pcb_group_id: z139.string().optional(),
-  subcircuit_id: z139.string().optional(),
+  pcb_component_id: z141.string(),
+  pcb_group_id: z141.string().optional(),
+  subcircuit_id: z141.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -3127,32 +3260,32 @@ var pcb_silkscreen_line = z139.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z140 } from "zod";
-var pcb_silkscreen_path = z140.object({
-  type: z140.literal("pcb_silkscreen_path"),
+import { z as z142 } from "zod";
+var pcb_silkscreen_path = z142.object({
+  type: z142.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z140.string(),
-  pcb_group_id: z140.string().optional(),
-  subcircuit_id: z140.string().optional(),
+  pcb_component_id: z142.string(),
+  pcb_group_id: z142.string().optional(),
+  subcircuit_id: z142.string().optional(),
   layer: visible_layer,
-  route: z140.array(point),
+  route: z142.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z141 } from "zod";
-var pcb_silkscreen_text = z141.object({
-  type: z141.literal("pcb_silkscreen_text"),
+import { z as z143 } from "zod";
+var pcb_silkscreen_text = z143.object({
+  type: z143.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z141.string().optional(),
-  subcircuit_id: z141.string().optional(),
-  font: z141.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z143.string().optional(),
+  subcircuit_id: z143.string().optional(),
+  font: z143.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z141.string(),
-  text: z141.string(),
-  is_knockout: z141.boolean().default(false).optional(),
-  knockout_padding: z141.object({
+  pcb_component_id: z143.string(),
+  text: z143.string(),
+  is_knockout: z143.boolean().default(false).optional(),
+  knockout_padding: z143.object({
     left: length,
     top: length,
     bottom: length,
@@ -3163,27 +3296,27 @@ var pcb_silkscreen_text = z141.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z141.number().optional(),
+  ccw_rotation: z143.number().optional(),
   layer: layer_ref,
-  is_mirrored: z141.boolean().default(false).optional(),
+  is_mirrored: z143.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z142 } from "zod";
-var pcb_copper_text = z142.object({
-  type: z142.literal("pcb_copper_text"),
+import { z as z144 } from "zod";
+var pcb_copper_text = z144.object({
+  type: z144.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z142.string().optional(),
-  subcircuit_id: z142.string().optional(),
-  font: z142.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z144.string().optional(),
+  subcircuit_id: z144.string().optional(),
+  font: z144.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z142.string(),
-  text: z142.string(),
-  is_knockout: z142.boolean().default(false).optional(),
-  knockout_padding: z142.object({
+  pcb_component_id: z144.string(),
+  text: z144.string(),
+  is_knockout: z144.boolean().default(false).optional(),
+  knockout_padding: z144.object({
     left: length,
     top: length,
     bottom: length,
@@ -3194,61 +3327,61 @@ var pcb_copper_text = z142.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z142.number().optional(),
+  ccw_rotation: z144.number().optional(),
   layer: layer_ref,
-  is_mirrored: z142.boolean().default(false).optional(),
+  is_mirrored: z144.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z143 } from "zod";
-var pcb_silkscreen_rect = z143.object({
-  type: z143.literal("pcb_silkscreen_rect"),
+import { z as z145 } from "zod";
+var pcb_silkscreen_rect = z145.object({
+  type: z145.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z143.string(),
-  pcb_group_id: z143.string().optional(),
-  subcircuit_id: z143.string().optional(),
+  pcb_component_id: z145.string(),
+  pcb_group_id: z145.string().optional(),
+  subcircuit_id: z145.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z143.boolean().default(true).optional(),
-  has_stroke: z143.boolean().optional(),
-  is_stroke_dashed: z143.boolean().optional(),
-  ccw_rotation: z143.number().optional()
+  is_filled: z145.boolean().default(true).optional(),
+  has_stroke: z145.boolean().optional(),
+  is_stroke_dashed: z145.boolean().optional(),
+  ccw_rotation: z145.number().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z144 } from "zod";
-var pcb_silkscreen_circle = z144.object({
-  type: z144.literal("pcb_silkscreen_circle"),
+import { z as z146 } from "zod";
+var pcb_silkscreen_circle = z146.object({
+  type: z146.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z144.string(),
-  pcb_group_id: z144.string().optional(),
-  subcircuit_id: z144.string().optional(),
+  pcb_component_id: z146.string(),
+  pcb_group_id: z146.string().optional(),
+  subcircuit_id: z146.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm"),
-  is_filled: z144.boolean().optional()
+  is_filled: z146.boolean().optional()
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z145 } from "zod";
-var pcb_silkscreen_oval = z145.object({
-  type: z145.literal("pcb_silkscreen_oval"),
+import { z as z147 } from "zod";
+var pcb_silkscreen_oval = z147.object({
+  type: z147.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z145.string(),
-  pcb_group_id: z145.string().optional(),
-  subcircuit_id: z145.string().optional(),
+  pcb_component_id: z147.string(),
+  pcb_group_id: z147.string().optional(),
+  subcircuit_id: z147.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -3258,265 +3391,265 @@ var pcb_silkscreen_oval = z145.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_graphic.ts
-import { z as z146 } from "zod";
-var pcb_silkscreen_graphic_base = z146.object({
-  type: z146.literal("pcb_silkscreen_graphic"),
+import { z as z148 } from "zod";
+var pcb_silkscreen_graphic_base = z148.object({
+  type: z148.literal("pcb_silkscreen_graphic"),
   pcb_silkscreen_graphic_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_graphic"
   ),
-  pcb_component_id: z146.string(),
-  pcb_group_id: z146.string().optional(),
-  subcircuit_id: z146.string().optional(),
+  pcb_component_id: z148.string(),
+  pcb_group_id: z148.string().optional(),
+  subcircuit_id: z148.string().optional(),
   layer: visible_layer,
   image_asset: asset.optional()
 });
 var pcb_silkscreen_graphic_brep = pcb_silkscreen_graphic_base.extend({
-  shape: z146.literal("brep"),
+  shape: z148.literal("brep"),
   brep_shape
 }).describe("Defines a BRep silkscreen graphic on the PCB");
 expectTypesMatch(
   true
 );
-var pcb_silkscreen_graphic = z146.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
+var pcb_silkscreen_graphic = z148.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z147 } from "zod";
-var pcb_silkscreen_pill = z147.object({
-  type: z147.literal("pcb_silkscreen_pill"),
+import { z as z149 } from "zod";
+var pcb_silkscreen_pill = z149.object({
+  type: z149.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z147.string(),
-  pcb_group_id: z147.string().optional(),
-  subcircuit_id: z147.string().optional(),
+  pcb_component_id: z149.string(),
+  pcb_group_id: z149.string().optional(),
+  subcircuit_id: z149.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
-  ccw_rotation: z147.number().optional()
+  ccw_rotation: z149.number().optional()
 }).describe("Defines a silkscreen pill on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z148 } from "zod";
-var pcb_fabrication_note_text = z148.object({
-  type: z148.literal("pcb_fabrication_note_text"),
+import { z as z150 } from "zod";
+var pcb_fabrication_note_text = z150.object({
+  type: z150.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z148.string().optional(),
-  pcb_group_id: z148.string().optional(),
-  font: z148.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z150.string().optional(),
+  pcb_group_id: z150.string().optional(),
+  font: z150.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z148.string(),
-  text: z148.string(),
-  ccw_rotation: z148.number().optional(),
+  pcb_component_id: z150.string(),
+  text: z150.string(),
+  ccw_rotation: z150.number().optional(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z148.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z148.string().optional()
+  anchor_alignment: z150.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z150.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z149 } from "zod";
-var pcb_fabrication_note_path = z149.object({
-  type: z149.literal("pcb_fabrication_note_path"),
+import { z as z151 } from "zod";
+var pcb_fabrication_note_path = z151.object({
+  type: z151.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z149.string(),
-  subcircuit_id: z149.string().optional(),
+  pcb_component_id: z151.string(),
+  subcircuit_id: z151.string().optional(),
   layer: layer_ref,
-  route: z149.array(point),
+  route: z151.array(point),
   stroke_width: length,
-  color: z149.string().optional()
+  color: z151.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z150 } from "zod";
-var pcb_fabrication_note_rect = z150.object({
-  type: z150.literal("pcb_fabrication_note_rect"),
+import { z as z152 } from "zod";
+var pcb_fabrication_note_rect = z152.object({
+  type: z152.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z150.string(),
-  pcb_group_id: z150.string().optional(),
-  subcircuit_id: z150.string().optional(),
+  pcb_component_id: z152.string(),
+  pcb_group_id: z152.string().optional(),
+  subcircuit_id: z152.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z150.boolean().optional(),
-  has_stroke: z150.boolean().optional(),
-  is_stroke_dashed: z150.boolean().optional(),
-  color: z150.string().optional()
+  is_filled: z152.boolean().optional(),
+  has_stroke: z152.boolean().optional(),
+  is_stroke_dashed: z152.boolean().optional(),
+  color: z152.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z151 } from "zod";
-var pcb_fabrication_note_dimension = z151.object({
-  type: z151.literal("pcb_fabrication_note_dimension"),
+import { z as z153 } from "zod";
+var pcb_fabrication_note_dimension = z153.object({
+  type: z153.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z151.string(),
-  pcb_group_id: z151.string().optional(),
-  subcircuit_id: z151.string().optional(),
+  pcb_component_id: z153.string(),
+  pcb_group_id: z153.string().optional(),
+  subcircuit_id: z153.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z151.string().optional(),
-  text_ccw_rotation: z151.number().optional(),
+  text: z153.string().optional(),
+  text_ccw_rotation: z153.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z151.object({
-    x: z151.number(),
-    y: z151.number()
+  offset_direction: z153.object({
+    x: z153.number(),
+    y: z153.number()
   }).optional(),
-  font: z151.literal("tscircuit2024").default("tscircuit2024"),
+  font: z153.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z151.string().optional(),
+  color: z153.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z152 } from "zod";
-var pcb_note_text = z152.object({
-  type: z152.literal("pcb_note_text"),
+import { z as z154 } from "zod";
+var pcb_note_text = z154.object({
+  type: z154.literal("pcb_note_text"),
   pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z152.string().optional(),
-  pcb_group_id: z152.string().optional(),
-  subcircuit_id: z152.string().optional(),
-  name: z152.string().optional(),
-  font: z152.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_component_id: z154.string().optional(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional(),
+  name: z154.string().optional(),
+  font: z154.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  text: z152.string().optional(),
+  text: z154.string().optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z152.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  anchor_alignment: z154.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   layer: visible_layer.default("top"),
-  is_mirrored_from_top_view: z152.boolean().optional(),
-  color: z152.string().optional()
+  is_mirrored_from_top_view: z154.boolean().optional(),
+  color: z154.string().optional()
 }).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_rect.ts
-import { z as z153 } from "zod";
-var pcb_note_rect = z153.object({
-  type: z153.literal("pcb_note_rect"),
+import { z as z155 } from "zod";
+var pcb_note_rect = z155.object({
+  type: z155.literal("pcb_note_rect"),
   pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
-  pcb_component_id: z153.string().optional(),
-  pcb_group_id: z153.string().optional(),
-  subcircuit_id: z153.string().optional(),
-  name: z153.string().optional(),
-  text: z153.string().optional(),
+  pcb_component_id: z155.string().optional(),
+  pcb_group_id: z155.string().optional(),
+  subcircuit_id: z155.string().optional(),
+  name: z155.string().optional(),
+  text: z155.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z153.boolean().optional(),
-  has_stroke: z153.boolean().optional(),
-  is_stroke_dashed: z153.boolean().optional(),
-  color: z153.string().optional()
+  is_filled: z155.boolean().optional(),
+  has_stroke: z155.boolean().optional(),
+  is_stroke_dashed: z155.boolean().optional(),
+  color: z155.string().optional()
 }).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_path.ts
-import { z as z154 } from "zod";
-var pcb_note_path = z154.object({
-  type: z154.literal("pcb_note_path"),
+import { z as z156 } from "zod";
+var pcb_note_path = z156.object({
+  type: z156.literal("pcb_note_path"),
   pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
-  pcb_component_id: z154.string().optional(),
-  pcb_group_id: z154.string().optional(),
-  subcircuit_id: z154.string().optional(),
-  name: z154.string().optional(),
-  text: z154.string().optional(),
-  route: z154.array(point),
+  pcb_component_id: z156.string().optional(),
+  pcb_group_id: z156.string().optional(),
+  subcircuit_id: z156.string().optional(),
+  name: z156.string().optional(),
+  text: z156.string().optional(),
+  route: z156.array(point),
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
-  color: z154.string().optional()
+  color: z156.string().optional()
 }).describe("Defines a polyline documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_line.ts
-import { z as z155 } from "zod";
-var pcb_note_line = z155.object({
-  type: z155.literal("pcb_note_line"),
+import { z as z157 } from "zod";
+var pcb_note_line = z157.object({
+  type: z157.literal("pcb_note_line"),
   pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
-  pcb_component_id: z155.string().optional(),
-  pcb_group_id: z155.string().optional(),
-  subcircuit_id: z155.string().optional(),
-  name: z155.string().optional(),
-  text: z155.string().optional(),
+  pcb_component_id: z157.string().optional(),
+  pcb_group_id: z157.string().optional(),
+  subcircuit_id: z157.string().optional(),
+  name: z157.string().optional(),
+  text: z157.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   layer: visible_layer.default("top"),
   stroke_width: distance.default("0.1mm"),
-  color: z155.string().optional(),
-  is_dashed: z155.boolean().optional()
+  color: z157.string().optional(),
+  is_dashed: z157.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z156 } from "zod";
-var pcb_note_dimension = z156.object({
-  type: z156.literal("pcb_note_dimension"),
+import { z as z158 } from "zod";
+var pcb_note_dimension = z158.object({
+  type: z158.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z156.string().optional(),
-  pcb_group_id: z156.string().optional(),
-  subcircuit_id: z156.string().optional(),
-  name: z156.string().optional(),
+  pcb_component_id: z158.string().optional(),
+  pcb_group_id: z158.string().optional(),
+  subcircuit_id: z158.string().optional(),
+  name: z158.string().optional(),
   from: point,
   to: point,
-  text: z156.string().optional(),
-  text_ccw_rotation: z156.number().optional(),
+  text: z158.string().optional(),
+  text_ccw_rotation: z158.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z156.object({
-    x: z156.number(),
-    y: z156.number()
+  offset_direction: z158.object({
+    x: z158.number(),
+    y: z158.number()
   }).optional(),
-  font: z156.literal("tscircuit2024").default("tscircuit2024"),
+  font: z158.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
   layer: visible_layer.default("top"),
-  color: z156.string().optional(),
+  color: z158.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z157 } from "zod";
+import { z as z159 } from "zod";
 var pcb_footprint_overlap_error = base_circuit_json_error.extend({
-  type: z157.literal("pcb_footprint_overlap_error"),
+  type: z159.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z157.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  pcb_smtpad_ids: z157.array(z157.string()).optional(),
-  pcb_plated_hole_ids: z157.array(z157.string()).optional(),
-  pcb_hole_ids: z157.array(z157.string()).optional(),
-  pcb_keepout_ids: z157.array(z157.string()).optional()
+  error_type: z159.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  pcb_smtpad_ids: z159.array(z159.string()).optional(),
+  pcb_plated_hole_ids: z159.array(z159.string()).optional(),
+  pcb_hole_ids: z159.array(z159.string()).optional(),
+  pcb_keepout_ids: z159.array(z159.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_courtyard_overlap_error.ts
-import { z as z158 } from "zod";
+import { z as z160 } from "zod";
 var pcb_courtyard_overlap_error = base_circuit_json_error.extend({
-  type: z158.literal("pcb_courtyard_overlap_error"),
+  type: z160.literal("pcb_courtyard_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z158.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
-  pcb_component_ids: z158.tuple([z158.string(), z158.string()])
+  error_type: z160.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
+  pcb_component_ids: z160.tuple([z160.string(), z160.string()])
 }).describe(
   "Error emitted when the courtyard (CrtYd) of one PCB component overlaps with the courtyard of another"
 );
@@ -3525,78 +3658,78 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z159 } from "zod";
-var pcb_keepout_outline = z159.object({
-  type: z159.literal("pcb_keepout"),
-  shape: z159.literal("outline"),
-  pcb_group_id: z159.string().optional(),
-  subcircuit_id: z159.string().optional(),
-  outline: z159.array(point).min(2),
+import { z as z161 } from "zod";
+var pcb_keepout_outline = z161.object({
+  type: z161.literal("pcb_keepout"),
+  shape: z161.literal("outline"),
+  pcb_group_id: z161.string().optional(),
+  subcircuit_id: z161.string().optional(),
+  outline: z161.array(point).min(2),
   stroke_width: length,
-  pcb_keepout_id: z159.string(),
-  layers: z159.array(z159.string()),
-  description: z159.string().optional(),
-  excluded_pcb_component_ids: z159.array(z159.string()).optional(),
-  warning_only: z159.boolean().optional(),
-  allow_traces: z159.boolean().optional(),
-  allow_placements: z159.boolean().optional()
-});
-var pcb_keepout = z159.object({
-  type: z159.literal("pcb_keepout"),
-  shape: z159.literal("rect"),
-  pcb_group_id: z159.string().optional(),
-  subcircuit_id: z159.string().optional(),
+  pcb_keepout_id: z161.string(),
+  layers: z161.array(z161.string()),
+  description: z161.string().optional(),
+  excluded_pcb_component_ids: z161.array(z161.string()).optional(),
+  warning_only: z161.boolean().optional(),
+  allow_traces: z161.boolean().optional(),
+  allow_placements: z161.boolean().optional()
+});
+var pcb_keepout = z161.object({
+  type: z161.literal("pcb_keepout"),
+  shape: z161.literal("rect"),
+  pcb_group_id: z161.string().optional(),
+  subcircuit_id: z161.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z159.string(),
-  layers: z159.array(z159.string()),
+  pcb_keepout_id: z161.string(),
+  layers: z161.array(z161.string()),
   // Specify layers where the keepout applies
-  description: z159.string().optional(),
+  description: z161.string().optional(),
   // Optional description of the keepout
-  excluded_pcb_component_ids: z159.array(z159.string()).optional(),
-  warning_only: z159.boolean().optional(),
-  allow_traces: z159.boolean().optional(),
-  allow_placements: z159.boolean().optional()
+  excluded_pcb_component_ids: z161.array(z161.string()).optional(),
+  warning_only: z161.boolean().optional(),
+  allow_traces: z161.boolean().optional(),
+  allow_placements: z161.boolean().optional()
 }).or(
-  z159.object({
-    type: z159.literal("pcb_keepout"),
-    shape: z159.literal("circle"),
-    pcb_group_id: z159.string().optional(),
-    subcircuit_id: z159.string().optional(),
+  z161.object({
+    type: z161.literal("pcb_keepout"),
+    shape: z161.literal("circle"),
+    pcb_group_id: z161.string().optional(),
+    subcircuit_id: z161.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z159.string(),
-    layers: z159.array(z159.string()),
+    pcb_keepout_id: z161.string(),
+    layers: z161.array(z161.string()),
     // Specify layers where the keepout applies
-    description: z159.string().optional(),
+    description: z161.string().optional(),
     // Optional description of the keepout
-    excluded_pcb_component_ids: z159.array(z159.string()).optional(),
-    warning_only: z159.boolean().optional(),
-    allow_traces: z159.boolean().optional(),
-    allow_placements: z159.boolean().optional()
+    excluded_pcb_component_ids: z161.array(z161.string()).optional(),
+    warning_only: z161.boolean().optional(),
+    allow_traces: z161.boolean().optional(),
+    allow_placements: z161.boolean().optional()
   })
 ).or(pcb_keepout_outline);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_keepout_overlap_warning.ts
-import { z as z160 } from "zod";
-var pcb_keepout_overlap_warning = z160.object({
-  type: z160.literal("pcb_keepout_overlap_warning"),
+import { z as z162 } from "zod";
+var pcb_keepout_overlap_warning = z162.object({
+  type: z162.literal("pcb_keepout_overlap_warning"),
   pcb_keepout_overlap_warning_id: getZodPrefixedIdWithDefault(
     "pcb_keepout_overlap_warning"
   ),
-  warning_type: z160.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
-  message: z160.string(),
-  pcb_keepout_id: z160.string(),
-  pcb_component_ids: z160.array(z160.string()).optional(),
-  pcb_trace_ids: z160.array(z160.string()).optional(),
-  pcb_smtpad_ids: z160.array(z160.string()).optional(),
-  pcb_plated_hole_ids: z160.array(z160.string()).optional(),
-  pcb_via_ids: z160.array(z160.string()).optional(),
+  warning_type: z162.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
+  message: z162.string(),
+  pcb_keepout_id: z162.string(),
+  pcb_component_ids: z162.array(z162.string()).optional(),
+  pcb_trace_ids: z162.array(z162.string()).optional(),
+  pcb_smtpad_ids: z162.array(z162.string()).optional(),
+  pcb_plated_hole_ids: z162.array(z162.string()).optional(),
+  pcb_via_ids: z162.array(z162.string()).optional(),
   center: point.optional(),
-  subcircuit_id: z160.string().optional()
+  subcircuit_id: z162.string().optional()
 }).describe(
   "Warning emitted when copper overlaps a PCB keepout with warning_only enabled"
 );
@@ -3605,18 +3738,18 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_cutout.ts
-import { z as z161 } from "zod";
-var pcb_cutout_base = z161.object({
-  type: z161.literal("pcb_cutout"),
+import { z as z163 } from "zod";
+var pcb_cutout_base = z163.object({
+  type: z163.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_component_id: z161.string().optional(),
-  pcb_group_id: z161.string().optional(),
-  subcircuit_id: z161.string().optional(),
-  pcb_board_id: z161.string().optional(),
-  pcb_panel_id: z161.string().optional()
+  pcb_component_id: z163.string().optional(),
+  pcb_group_id: z163.string().optional(),
+  subcircuit_id: z163.string().optional(),
+  pcb_board_id: z163.string().optional(),
+  pcb_panel_id: z163.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z161.literal("rect"),
+  shape: z163.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3625,26 +3758,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z161.literal("circle"),
+  shape: z163.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z161.literal("polygon"),
-  points: z161.array(point)
+  shape: z163.literal("polygon"),
+  points: z163.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z161.literal("path"),
-  route: z161.array(point),
+  shape: z163.literal("path"),
+  route: z163.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z161.discriminatedUnion("shape", [
+var pcb_cutout = z163.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3653,223 +3786,223 @@ var pcb_cutout = z161.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z162 } from "zod";
+import { z as z164 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z162.literal("pcb_missing_footprint_error"),
+  type: z164.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z162.string().optional(),
-  subcircuit_id: z162.string().optional(),
-  error_type: z162.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z162.string()
+  pcb_group_id: z164.string().optional(),
+  subcircuit_id: z164.string().optional(),
+  error_type: z164.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z164.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z163 } from "zod";
+import { z as z165 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z163.literal("external_footprint_load_error"),
+  type: z165.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z163.string(),
-  source_component_id: z163.string(),
-  pcb_group_id: z163.string().optional(),
-  subcircuit_id: z163.string().optional(),
-  footprinter_string: z163.string().optional(),
-  error_type: z163.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z165.string(),
+  source_component_id: z165.string(),
+  pcb_group_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional(),
+  footprinter_string: z165.string().optional(),
+  error_type: z165.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z164 } from "zod";
+import { z as z166 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z164.literal("circuit_json_footprint_load_error"),
+  type: z166.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z164.string(),
-  source_component_id: z164.string(),
-  pcb_group_id: z164.string().optional(),
-  subcircuit_id: z164.string().optional(),
-  error_type: z164.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z164.array(z164.any()).optional()
+  pcb_component_id: z166.string(),
+  source_component_id: z166.string(),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
+  error_type: z166.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z166.array(z166.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z165 } from "zod";
-var pcb_group = z165.object({
-  type: z165.literal("pcb_group"),
+import { z as z167 } from "zod";
+var pcb_group = z167.object({
+  type: z167.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z165.string(),
-  is_subcircuit: z165.boolean().optional(),
-  subcircuit_id: z165.string().optional(),
+  source_group_id: z167.string(),
+  is_subcircuit: z167.boolean().optional(),
+  subcircuit_id: z167.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z165.string().optional().describe(
+  display_offset_x: z167.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z165.string().optional().describe(
+  display_offset_y: z167.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z165.array(point).optional(),
+  outline: z167.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z165.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z165.string().optional(),
-  positioned_relative_to_pcb_board_id: z165.string().optional(),
-  pcb_component_ids: z165.array(z165.string()),
-  child_layout_mode: z165.enum(["packed", "none"]).optional(),
-  name: z165.string().optional(),
-  description: z165.string().optional(),
-  layout_mode: z165.string().optional(),
-  autorouter_configuration: z165.object({
+  position_mode: z167.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z167.string().optional(),
+  positioned_relative_to_pcb_board_id: z167.string().optional(),
+  pcb_component_ids: z167.array(z167.string()),
+  child_layout_mode: z167.enum(["packed", "none"]).optional(),
+  name: z167.string().optional(),
+  description: z167.string().optional(),
+  layout_mode: z167.string().optional(),
+  autorouter_configuration: z167.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z165.string().optional()
+  autorouter_used_string: z167.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z166 } from "zod";
+import { z as z168 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z166.literal("pcb_autorouting_error"),
+  type: z168.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z166.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z166.string().optional()
+  error_type: z168.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z168.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_preflight_routing_error.ts
-import { z as z167 } from "zod";
+import { z as z169 } from "zod";
 var pcb_preflight_routing_error = base_circuit_json_error.extend({
-  type: z167.literal("pcb_preflight_routing_error"),
+  type: z169.literal("pcb_preflight_routing_error"),
   pcb_preflight_routing_error_id: getZodPrefixedIdWithDefault(
     "pcb_preflight_routing_error"
   ),
-  error_type: z167.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
-  error_code: z167.string(),
-  subcircuit_id: z167.string().optional(),
-  pcb_group_id: z167.string().optional(),
-  routing_phase_index: z167.number().int().optional(),
-  phase_name: z167.string().optional(),
-  source_trace_ids: z167.array(z167.string()).optional(),
-  pcb_component_ids: z167.array(z167.string()).optional(),
-  pcb_port_ids: z167.array(z167.string()).optional(),
-  related_error_ids: z167.array(z167.string()).optional(),
-  measurements: z167.record(z167.number().finite()).optional()
+  error_type: z169.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
+  error_code: z169.string(),
+  subcircuit_id: z169.string().optional(),
+  pcb_group_id: z169.string().optional(),
+  routing_phase_index: z169.number().int().optional(),
+  phase_name: z169.string().optional(),
+  source_trace_ids: z169.array(z169.string()).optional(),
+  pcb_component_ids: z169.array(z169.string()).optional(),
+  pcb_port_ids: z169.array(z169.string()).optional(),
+  related_error_ids: z169.array(z169.string()).optional(),
+  measurements: z169.record(z169.number().finite()).optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z168 } from "zod";
-var pcb_manual_edit_conflict_warning = z168.object({
-  type: z168.literal("pcb_manual_edit_conflict_warning"),
+import { z as z170 } from "zod";
+var pcb_manual_edit_conflict_warning = z170.object({
+  type: z170.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z168.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z168.string(),
-  pcb_component_id: z168.string(),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional(),
-  source_component_id: z168.string()
+  warning_type: z170.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z170.string(),
+  pcb_component_id: z170.string(),
+  pcb_group_id: z170.string().optional(),
+  subcircuit_id: z170.string().optional(),
+  source_component_id: z170.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z169 } from "zod";
-var connectorOrientationDirection = z169.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z169.object({
-  type: z169.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z171 } from "zod";
+var connectorOrientationDirection = z171.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z171.object({
+  type: z171.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z169.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z169.string(),
-  pcb_component_id: z169.string(),
-  source_component_id: z169.string().optional(),
-  pcb_board_id: z169.string().optional(),
+  warning_type: z171.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z171.string(),
+  pcb_component_id: z171.string(),
+  source_component_id: z171.string().optional(),
+  pcb_board_id: z171.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z169.string().optional()
+  subcircuit_id: z171.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_missing_courtyard_warning.ts
-import { z as z170 } from "zod";
-var pcb_component_missing_courtyard_warning = z170.object({
-  type: z170.literal("pcb_component_missing_courtyard_warning"),
+import { z as z172 } from "zod";
+var pcb_component_missing_courtyard_warning = z172.object({
+  type: z172.literal("pcb_component_missing_courtyard_warning"),
   pcb_component_missing_courtyard_warning_id: getZodPrefixedIdWithDefault(
     "pcb_component_missing_courtyard_warning"
   ),
-  warning_type: z170.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
-  message: z170.string(),
-  pcb_component_id: z170.string(),
-  source_component_id: z170.string().optional(),
-  subcircuit_id: z170.string().optional()
+  warning_type: z172.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
+  message: z172.string(),
+  pcb_component_id: z172.string(),
+  source_component_id: z172.string().optional(),
+  subcircuit_id: z172.string().optional()
 }).describe("Warning emitted when a PCB component has no courtyard geometry");
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z171 } from "zod";
-var supplier_footprint_mismatch_warning = z171.object({
-  type: z171.literal("supplier_footprint_mismatch_warning"),
+import { z as z173 } from "zod";
+var supplier_footprint_mismatch_warning = z173.object({
+  type: z173.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z171.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z171.string(),
-  source_component_id: z171.string(),
-  pcb_component_id: z171.string().optional(),
-  pcb_group_id: z171.string().optional(),
-  subcircuit_id: z171.string().optional(),
+  warning_type: z173.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z173.string(),
+  source_component_id: z173.string(),
+  pcb_component_id: z173.string().optional(),
+  pcb_group_id: z173.string().optional(),
+  subcircuit_id: z173.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z171.string().optional(),
-  supplier_footprint_url: z171.string().optional(),
-  footprint_copper_intersection_over_union: z171.number()
+  supplier_part_number: z173.string().optional(),
+  supplier_footprint_url: z173.string().optional(),
+  footprint_copper_intersection_over_union: z173.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabricator_extra_charge_warning.ts
-import { z as z172 } from "zod";
-var pcb_fabricator_extra_charge_warning = z172.object({
-  type: z172.literal("pcb_fabricator_extra_charge_warning"),
+import { z as z174 } from "zod";
+var pcb_fabricator_extra_charge_warning = z174.object({
+  type: z174.literal("pcb_fabricator_extra_charge_warning"),
   pcb_fabricator_extra_charge_warning_id: getZodPrefixedIdWithDefault(
     "pcb_fabricator_extra_charge_warning"
   ),
-  warning_type: z172.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
-  message: z172.string(),
-  fabricator_preset: z172.string(),
-  pcb_board_id: z172.string().optional(),
-  pcb_via_ids: z172.array(z172.string()).optional(),
-  subcircuit_id: z172.string().optional()
+  warning_type: z174.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
+  message: z174.string(),
+  fabricator_preset: z174.string(),
+  pcb_board_id: z174.string().optional(),
+  pcb_via_ids: z174.array(z174.string()).optional(),
+  subcircuit_id: z174.string().optional()
 }).describe(
   "Warning that a design feature incurs an extra charge for the selected fabricator preset, such as via hole diameters below 0.3 mm with JLCPCB economy or standard presets."
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z173 } from "zod";
-var pcb_breakout_point = z173.object({
-  type: z173.literal("pcb_breakout_point"),
+import { z as z175 } from "zod";
+var pcb_breakout_point = z175.object({
+  type: z175.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z173.string(),
-  subcircuit_id: z173.string().optional(),
-  source_trace_id: z173.string().optional(),
-  source_port_id: z173.string().optional(),
-  source_net_id: z173.string().optional(),
+  pcb_group_id: z175.string(),
+  subcircuit_id: z175.string().optional(),
+  source_trace_id: z175.string().optional(),
+  source_port_id: z175.string().optional(),
+  source_net_id: z175.string().optional(),
   layer: layer_ref.optional(),
   x: distance,
   y: distance
@@ -3879,61 +4012,61 @@ var pcb_breakout_point = z173.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z174 } from "zod";
-var pcb_ground_plane = z174.object({
-  type: z174.literal("pcb_ground_plane"),
+import { z as z176 } from "zod";
+var pcb_ground_plane = z176.object({
+  type: z176.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z174.string(),
-  source_net_id: z174.string(),
-  pcb_group_id: z174.string().optional(),
-  subcircuit_id: z174.string().optional()
+  source_pcb_ground_plane_id: z176.string(),
+  source_net_id: z176.string(),
+  pcb_group_id: z176.string().optional(),
+  subcircuit_id: z176.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z175 } from "zod";
-var pcb_ground_plane_region = z175.object({
-  type: z175.literal("pcb_ground_plane_region"),
+import { z as z177 } from "zod";
+var pcb_ground_plane_region = z177.object({
+  type: z177.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z175.string(),
-  pcb_group_id: z175.string().optional(),
-  subcircuit_id: z175.string().optional(),
+  pcb_ground_plane_id: z177.string(),
+  pcb_group_id: z177.string().optional(),
+  subcircuit_id: z177.string().optional(),
   layer: layer_ref,
-  points: z175.array(point)
+  points: z177.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z176 } from "zod";
-var pcb_thermal_spoke = z176.object({
-  type: z176.literal("pcb_thermal_spoke"),
+import { z as z178 } from "zod";
+var pcb_thermal_spoke = z178.object({
+  type: z178.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z176.string(),
-  shape: z176.string(),
-  spoke_count: z176.number(),
+  pcb_ground_plane_id: z178.string(),
+  shape: z178.string(),
+  spoke_count: z178.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z176.string().optional(),
-  subcircuit_id: z176.string().optional()
+  pcb_plated_hole_id: z178.string().optional(),
+  subcircuit_id: z178.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z177 } from "zod";
-var pcb_copper_pour_base = z177.object({
-  type: z177.literal("pcb_copper_pour"),
+import { z as z179 } from "zod";
+var pcb_copper_pour_base = z179.object({
+  type: z179.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z177.string().optional(),
-  subcircuit_id: z177.string().optional(),
+  pcb_group_id: z179.string().optional(),
+  subcircuit_id: z179.string().optional(),
   layer: layer_ref,
-  source_net_id: z177.string().optional(),
-  covered_with_solder_mask: z177.boolean().optional().default(true)
+  source_net_id: z179.string().optional(),
+  covered_with_solder_mask: z179.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z177.literal("rect"),
+  shape: z179.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3941,16 +4074,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z177.literal("brep"),
+  shape: z179.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z177.literal("polygon"),
-  points: z177.array(point)
+  shape: z179.literal("polygon"),
+  points: z179.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z177.discriminatedUnion("shape", [
+var pcb_copper_pour = z179.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -3958,99 +4091,99 @@ var pcb_copper_pour = z177.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z178 } from "zod";
+import { z as z180 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z178.literal("pcb_component_outside_board_error"),
+  type: z180.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z178.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z178.string(),
-  pcb_board_id: z178.string(),
+  error_type: z180.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z180.string(),
+  pcb_board_id: z180.string(),
   component_center: point,
-  component_bounds: z178.object({
-    min_x: z178.number(),
-    max_x: z178.number(),
-    min_y: z178.number(),
-    max_y: z178.number()
+  component_bounds: z180.object({
+    min_x: z180.number(),
+    max_x: z180.number(),
+    min_y: z180.number(),
+    max_y: z180.number()
   }),
-  subcircuit_id: z178.string().optional(),
-  source_component_id: z178.string().optional()
+  subcircuit_id: z180.string().optional(),
+  source_component_id: z180.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z179 } from "zod";
+import { z as z181 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z179.literal("pcb_component_not_on_board_edge_error"),
+  type: z181.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z179.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z179.string(),
-  pcb_board_id: z179.string(),
+  error_type: z181.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z181.string(),
+  pcb_board_id: z181.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z179.number(),
-  source_component_id: z179.string().optional(),
-  subcircuit_id: z179.string().optional()
+  pad_to_nearest_board_edge_distance: z181.number(),
+  source_component_id: z181.string().optional(),
+  subcircuit_id: z181.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z180 } from "zod";
+import { z as z182 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z180.literal("pcb_component_invalid_layer_error"),
+  type: z182.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z180.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z180.string().optional(),
-  source_component_id: z180.string(),
+  error_type: z182.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z182.string().optional(),
+  source_component_id: z182.string(),
   layer: layer_ref,
-  subcircuit_id: z180.string().optional()
+  subcircuit_id: z182.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z181 } from "zod";
+import { z as z183 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z181.literal("pcb_via_clearance_error"),
+  type: z183.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z181.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z181.array(z181.string()).min(2),
+  error_type: z183.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z183.array(z183.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z181.object({
-    x: z181.number().optional(),
-    y: z181.number().optional()
+  pcb_center: z183.object({
+    x: z183.number().optional(),
+    y: z183.number().optional()
   }).optional(),
-  subcircuit_id: z181.string().optional()
+  subcircuit_id: z183.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z182 } from "zod";
+import { z as z184 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z182.literal("pcb_via_trace_clearance_error"),
+  type: z184.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z182.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z182.string(),
-  pcb_trace_id: z182.string(),
+  error_type: z184.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z184.string(),
+  pcb_trace_id: z184.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z182.object({
-    x: z182.number().optional(),
-    y: z182.number().optional()
+  center: z184.object({
+    x: z184.number().optional(),
+    y: z184.number().optional()
   }).optional(),
-  subcircuit_id: z182.string().optional()
+  subcircuit_id: z184.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -4059,41 +4192,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z183 } from "zod";
+import { z as z185 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z183.literal("pcb_pad_pad_clearance_error"),
+  type: z185.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z183.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z183.array(z183.string()).min(2),
+  error_type: z185.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z185.array(z185.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z183.object({
-    x: z183.number().optional(),
-    y: z183.number().optional()
+  center: z185.object({
+    x: z185.number().optional(),
+    y: z185.number().optional()
   }).optional(),
-  subcircuit_id: z183.string().optional()
+  subcircuit_id: z185.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z184 } from "zod";
+import { z as z186 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z184.literal("pcb_pad_trace_clearance_error"),
+  type: z186.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z184.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z184.string(),
-  pcb_trace_id: z184.string(),
+  error_type: z186.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z186.string(),
+  pcb_trace_id: z186.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z184.object({
-    x: z184.number().optional(),
-    y: z184.number().optional()
+  center: z186.object({
+    x: z186.number().optional(),
+    y: z186.number().optional()
   }).optional(),
-  subcircuit_id: z184.string().optional()
+  subcircuit_id: z186.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -4102,89 +4235,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z185 } from "zod";
-var pcb_courtyard_rect = z185.object({
-  type: z185.literal("pcb_courtyard_rect"),
+import { z as z187 } from "zod";
+var pcb_courtyard_rect = z187.object({
+  type: z187.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z185.string(),
-  pcb_group_id: z185.string().optional(),
-  subcircuit_id: z185.string().optional(),
+  pcb_component_id: z187.string(),
+  pcb_group_id: z187.string().optional(),
+  subcircuit_id: z187.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z185.string().optional()
+  color: z187.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z186 } from "zod";
-var pcb_courtyard_outline = z186.object({
-  type: z186.literal("pcb_courtyard_outline"),
+import { z as z188 } from "zod";
+var pcb_courtyard_outline = z188.object({
+  type: z188.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z186.string(),
-  pcb_group_id: z186.string().optional(),
-  subcircuit_id: z186.string().optional(),
+  pcb_component_id: z188.string(),
+  pcb_group_id: z188.string().optional(),
+  subcircuit_id: z188.string().optional(),
   layer: visible_layer,
-  outline: z186.array(point).min(2)
+  outline: z188.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z187 } from "zod";
-var pcb_courtyard_polygon = z187.object({
-  type: z187.literal("pcb_courtyard_polygon"),
+import { z as z189 } from "zod";
+var pcb_courtyard_polygon = z189.object({
+  type: z189.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z187.string(),
-  pcb_group_id: z187.string().optional(),
-  subcircuit_id: z187.string().optional(),
+  pcb_component_id: z189.string(),
+  pcb_group_id: z189.string().optional(),
+  subcircuit_id: z189.string().optional(),
   layer: visible_layer,
-  points: z187.array(point).min(3),
-  color: z187.string().optional()
+  points: z189.array(point).min(3),
+  color: z189.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z188 } from "zod";
-var pcb_courtyard_circle = z188.object({
-  type: z188.literal("pcb_courtyard_circle"),
+import { z as z190 } from "zod";
+var pcb_courtyard_circle = z190.object({
+  type: z190.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z188.string(),
-  pcb_group_id: z188.string().optional(),
-  subcircuit_id: z188.string().optional(),
+  pcb_component_id: z190.string(),
+  pcb_group_id: z190.string().optional(),
+  subcircuit_id: z190.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z188.string().optional()
+  color: z190.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z189 } from "zod";
-var pcb_courtyard_pill = z189.object({
-  type: z189.literal("pcb_courtyard_pill"),
+import { z as z191 } from "zod";
+var pcb_courtyard_pill = z191.object({
+  type: z191.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z189.string(),
-  pcb_group_id: z189.string().optional(),
-  subcircuit_id: z189.string().optional(),
+  pcb_component_id: z191.string(),
+  pcb_group_id: z191.string().optional(),
+  subcircuit_id: z191.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z189.string().optional()
+  color: z191.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z190 } from "zod";
+import { z as z192 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -4215,71 +4348,71 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z190.object({
-  type: z190.literal("cad_component"),
-  cad_component_id: z190.string(),
-  pcb_component_id: z190.string().optional().describe(
+var cad_component = z192.object({
+  type: z192.literal("cad_component"),
+  cad_component_id: z192.string(),
+  pcb_component_id: z192.string().optional().describe(
     "Optional PCB component reference; omit for CAD geometry without a PCB component"
   ),
-  source_component_id: z190.string(),
+  source_component_id: z192.string(),
   position: point3,
   rotation: point3.optional(),
-  is_on_folded_board: z190.boolean().optional().describe(
+  is_on_folded_board: z192.boolean().optional().describe(
     "True when position and rotation describe the assembled folded board pose. False or omitted means the flat board pose. PCB records remain flat; pcb_component_id identifies the flat mount and owning board for reversible transforms."
   ),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z190.string().optional(),
+  subcircuit_id: z192.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z190.string().optional(),
-  model_obj_url: z190.string().optional(),
-  model_stl_url: z190.string().optional(),
-  model_3mf_url: z190.string().optional(),
-  model_gltf_url: z190.string().optional(),
-  model_glb_url: z190.string().optional(),
-  model_step_url: z190.string().optional(),
-  model_wrl_url: z190.string().optional(),
+  footprinter_string: z192.string().optional(),
+  model_obj_url: z192.string().optional(),
+  model_stl_url: z192.string().optional(),
+  model_3mf_url: z192.string().optional(),
+  model_gltf_url: z192.string().optional(),
+  model_glb_url: z192.string().optional(),
+  model_step_url: z192.string().optional(),
+  model_wrl_url: z192.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z190.number().optional(),
-  model_board_normal_direction: z190.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z192.number().optional(),
+  model_board_normal_direction: z192.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z190.enum([
+  model_origin_alignment: z192.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z190.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z190.any().optional(),
-  show_as_translucent_model: z190.boolean().optional(),
-  show_as_bounding_box: z190.boolean().optional(),
-  show_hidden_edges: z190.boolean().optional(),
-  anchor_alignment: z190.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z192.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z192.any().optional(),
+  show_as_translucent_model: z192.boolean().optional(),
+  show_as_bounding_box: z192.boolean().optional(),
+  show_hidden_edges: z192.boolean().optional(),
+  anchor_alignment: z192.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines CAD geometry, optionally associated with a PCB component");
 expectTypesMatch(true);
 
 // src/cad/cad_collision_error.ts
-import { z as z191 } from "zod";
+import { z as z193 } from "zod";
 var cad_collision_error = base_circuit_json_error.extend({
-  type: z191.literal("cad_collision_error"),
+  type: z193.literal("cad_collision_error"),
   cad_collision_error_id: getZodPrefixedIdWithDefault("cad_collision_error"),
-  error_type: z191.literal("cad_collision_error").default("cad_collision_error"),
-  cad_component_ids: z191.array(z191.string()).min(1),
-  pcb_component_ids: z191.array(z191.string()).optional(),
-  source_component_ids: z191.array(z191.string()).min(1),
-  intersection_area_mm2: z191.number().finite().nonnegative(),
-  threshold_area_mm2: z191.number().finite().nonnegative()
+  error_type: z193.literal("cad_collision_error").default("cad_collision_error"),
+  cad_component_ids: z193.array(z193.string()).min(1),
+  pcb_component_ids: z193.array(z193.string()).optional(),
+  source_component_ids: z193.array(z193.string()).min(1),
+  intersection_area_mm2: z193.number().finite().nonnegative(),
+  threshold_area_mm2: z193.number().finite().nonnegative()
 }).describe(
   "An aperture-bearing part intersects the finished enclosure. The intersection_area_mm2 is the union silhouette area of the solid intersection projected along the aperture face normal, in the right-handed Circuit JSON world frame (+X right, +Y top, +Z above). It is an area in square millimetres, not intersection volume or surface area. This indicates possible aperture misplacement, insufficient size/depth, or body clearance problems; it does not prove which cause applies."
 );
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z192 } from "zod";
-var wave_shape = z192.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z192.union([z192.string(), z192.number()]).transform((val) => {
+import { z as z194 } from "zod";
+var wave_shape = z194.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z194.union([z194.string(), z194.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4288,32 +4421,32 @@ var percentage = z192.union([z192.string(), z192.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z192.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z194.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z192.object({
-  type: z192.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z194.object({
+  type: z194.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z192.literal(true).optional().default(true),
-  positive_source_port_id: z192.string().optional(),
-  negative_source_port_id: z192.string().optional(),
-  positive_source_net_id: z192.string().optional(),
-  negative_source_net_id: z192.string().optional(),
+  is_dc_source: z194.literal(true).optional().default(true),
+  positive_source_port_id: z194.string().optional(),
+  negative_source_port_id: z194.string().optional(),
+  positive_source_net_id: z194.string().optional(),
+  negative_source_net_id: z194.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z192.object({
-  type: z192.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z194.object({
+  type: z194.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z192.literal(false),
-  terminal1_source_port_id: z192.string().optional(),
-  terminal2_source_port_id: z192.string().optional(),
-  terminal1_source_net_id: z192.string().optional(),
-  terminal2_source_net_id: z192.string().optional(),
+  is_dc_source: z194.literal(false),
+  terminal1_source_port_id: z194.string().optional(),
+  terminal2_source_port_id: z194.string().optional(),
+  terminal1_source_net_id: z194.string().optional(),
+  terminal2_source_net_id: z194.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4328,14 +4461,14 @@ var simulation_ac_voltage_source = z192.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z192.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z194.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z193 } from "zod";
-var percentage2 = z193.union([z193.string(), z193.number()]).transform((val) => {
+import { z as z195 } from "zod";
+var percentage2 = z195.union([z195.string(), z195.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4344,32 +4477,32 @@ var percentage2 = z193.union([z193.string(), z193.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z193.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z195.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z193.object({
-  type: z193.literal("simulation_current_source"),
+var simulation_dc_current_source = z195.object({
+  type: z195.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z193.literal(true).optional().default(true),
-  positive_source_port_id: z193.string().optional(),
-  negative_source_port_id: z193.string().optional(),
-  positive_source_net_id: z193.string().optional(),
-  negative_source_net_id: z193.string().optional(),
+  is_dc_source: z195.literal(true).optional().default(true),
+  positive_source_port_id: z195.string().optional(),
+  negative_source_port_id: z195.string().optional(),
+  positive_source_net_id: z195.string().optional(),
+  negative_source_net_id: z195.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z193.object({
-  type: z193.literal("simulation_current_source"),
+var simulation_ac_current_source = z195.object({
+  type: z195.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z193.literal(false),
-  terminal1_source_port_id: z193.string().optional(),
-  terminal2_source_port_id: z193.string().optional(),
-  terminal1_source_net_id: z193.string().optional(),
-  terminal2_source_net_id: z193.string().optional(),
+  is_dc_source: z195.literal(false),
+  terminal1_source_port_id: z195.string().optional(),
+  terminal2_source_port_id: z195.string().optional(),
+  terminal1_source_net_id: z195.string().optional(),
+  terminal2_source_net_id: z195.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4379,58 +4512,58 @@ var simulation_ac_current_source = z193.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z193.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z195.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z195 } from "zod";
+import { z as z197 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z194 } from "zod";
-var simulation_dc_sweep_unit = z194.custom(
+import { z as z196 } from "zod";
+var simulation_dc_sweep_unit = z196.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z194.custom(
+var simulation_parameter_unit = z196.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z195.union([
-  z195.literal("spice_dc_sweep"),
-  z195.literal("spice_dc_operating_point"),
-  z195.literal("spice_transient_analysis"),
-  z195.literal("spice_ac_analysis")
+var experiment_type = z197.union([
+  z197.literal("spice_dc_sweep"),
+  z197.literal("spice_dc_operating_point"),
+  z197.literal("spice_transient_analysis"),
+  z197.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z195.object({
-  method: z195.enum(["trap", "gear"]).optional(),
-  reltol: z195.union([z195.number(), z195.string()]).optional(),
-  abstol: z195.union([z195.number(), z195.string()]).optional(),
-  vntol: z195.union([z195.number(), z195.string()]).optional()
+var spice_simulation_options = z197.object({
+  method: z197.enum(["trap", "gear"]).optional(),
+  reltol: z197.union([z197.number(), z197.string()]).optional(),
+  abstol: z197.union([z197.number(), z197.string()]).optional(),
+  vntol: z197.union([z197.number(), z197.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z195.object({
-  type: z195.literal("simulation_experiment"),
+var simulation_experiment = z197.object({
+  type: z197.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z195.string(),
+  name: z197.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z195.string().optional(),
-  dc_sweep_current_source_id: z195.string().optional(),
-  dc_sweep_start: z195.number().optional(),
-  dc_sweep_stop: z195.number().optional(),
-  dc_sweep_step: z195.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z197.string().optional(),
+  dc_sweep_current_source_id: z197.string().optional(),
+  dc_sweep_start: z197.number().optional(),
+  dc_sweep_stop: z197.number().optional(),
+  dc_sweep_step: z197.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z195.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z195.number().int().positive().optional(),
-  ac_sample_count: z195.number().int().positive().optional(),
-  ac_start_frequency_hz: z195.number().positive().optional(),
-  ac_stop_frequency_hz: z195.number().positive().optional()
+  ac_sweep_type: z197.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z197.number().int().positive().optional(),
+  ac_sample_count: z197.number().int().positive().optional(),
+  ac_start_frequency_hz: z197.number().positive().optional(),
+  ac_stop_frequency_hz: z197.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4442,7 +4575,7 @@ var simulation_experiment = z195.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z195.ZodIssueCode.custom,
+          code: z197.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4452,7 +4585,7 @@ var simulation_experiment = z195.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4461,35 +4594,35 @@ var simulation_experiment = z195.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z195.ZodIssueCode.custom,
+        code: z197.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4499,87 +4632,87 @@ var simulation_experiment = z195.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z197 } from "zod";
+import { z as z199 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z196 } from "zod";
-var simulation_parameter_sweep_coordinate = z196.object({
-  simulation_parameter_sweep_id: z196.string(),
-  sweep_index: z196.number().int().nonnegative(),
-  parameter_value: z196.number(),
+import { z as z198 } from "zod";
+var simulation_parameter_sweep_coordinate = z198.object({
+  simulation_parameter_sweep_id: z198.string(),
+  sweep_index: z198.number().int().nonnegative(),
+  parameter_value: z198.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z197.object({
-  type: z197.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z199.object({
+  type: z199.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z197.string(),
+  simulation_experiment_id: z199.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z197.array(z197.number()).optional(),
-  voltage_levels: z197.array(z197.number()),
-  source_component_id: z197.string().optional(),
-  subcircuit_connectivity_map_key: z197.string().optional(),
+  timestamps_ms: z199.array(z199.number()).optional(),
+  voltage_levels: z199.array(z199.number()),
+  source_component_id: z199.string().optional(),
+  subcircuit_connectivity_map_key: z199.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z197.string().optional(),
-  color: z197.string().optional()
+  name: z199.string().optional(),
+  color: z199.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z198 } from "zod";
-var simulation_transient_current_graph = z198.object({
-  type: z198.literal("simulation_transient_current_graph"),
+import { z as z200 } from "zod";
+var simulation_transient_current_graph = z200.object({
+  type: z200.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z198.string(),
+  simulation_experiment_id: z200.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z198.array(z198.number()).optional(),
-  current_levels: z198.array(z198.number()),
-  source_component_id: z198.string().optional(),
-  subcircuit_connectivity_map_key: z198.string().optional(),
+  timestamps_ms: z200.array(z200.number()).optional(),
+  current_levels: z200.array(z200.number()),
+  source_component_id: z200.string().optional(),
+  subcircuit_connectivity_map_key: z200.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z198.string().optional(),
-  color: z198.string().optional()
+  name: z200.string().optional(),
+  color: z200.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z199 } from "zod";
-var simulation_switch = z199.object({
-  type: z199.literal("simulation_switch"),
+import { z as z201 } from "zod";
+var simulation_switch = z201.object({
+  type: z201.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z199.string().optional(),
+  source_component_id: z201.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z199.boolean().optional(),
+  starts_closed: z201.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z200 } from "zod";
-var simulation_voltage_probe = z200.object({
-  type: z200.literal("simulation_voltage_probe"),
+import { z as z202 } from "zod";
+var simulation_voltage_probe = z202.object({
+  type: z202.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z200.string().optional(),
-  name: z200.string().optional(),
-  signal_input_source_port_id: z200.string().optional(),
-  signal_input_source_net_id: z200.string().optional(),
-  reference_input_source_port_id: z200.string().optional(),
-  reference_input_source_net_id: z200.string().optional(),
-  subcircuit_id: z200.string().optional(),
-  color: z200.string().optional()
+  source_component_id: z202.string().optional(),
+  name: z202.string().optional(),
+  signal_input_source_port_id: z202.string().optional(),
+  signal_input_source_net_id: z202.string().optional(),
+  reference_input_source_port_id: z202.string().optional(),
+  reference_input_source_net_id: z202.string().optional(),
+  subcircuit_id: z202.string().optional(),
+  color: z202.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4589,20 +4722,20 @@ var simulation_voltage_probe = z200.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z200.ZodIssueCode.custom,
+        code: z202.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z200.ZodIssueCode.custom,
+          code: z202.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z200.ZodIssueCode.custom,
+          code: z202.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4610,7 +4743,7 @@ var simulation_voltage_probe = z200.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z200.ZodIssueCode.custom,
+        code: z202.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4619,20 +4752,20 @@ var simulation_voltage_probe = z200.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z201 } from "zod";
-var simulation_current_probe = z201.object({
-  type: z201.literal("simulation_current_probe"),
+import { z as z203 } from "zod";
+var simulation_current_probe = z203.object({
+  type: z203.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z201.string().optional(),
-  name: z201.string().optional(),
-  positive_source_port_id: z201.string().optional(),
-  negative_source_port_id: z201.string().optional(),
-  positive_source_net_id: z201.string().optional(),
-  negative_source_net_id: z201.string().optional(),
-  subcircuit_id: z201.string().optional(),
-  color: z201.string().optional()
+  source_component_id: z203.string().optional(),
+  name: z203.string().optional(),
+  positive_source_port_id: z203.string().optional(),
+  negative_source_port_id: z203.string().optional(),
+  positive_source_net_id: z203.string().optional(),
+  negative_source_net_id: z203.string().optional(),
+  subcircuit_id: z203.string().optional(),
+  color: z203.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -4644,7 +4777,7 @@ var simulation_current_probe = z201.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z201.ZodIssueCode.custom,
+      code: z203.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -4652,7 +4785,7 @@ var simulation_current_probe = z201.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z201.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -4661,71 +4794,71 @@ var simulation_current_probe = z201.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z201.ZodIssueCode.custom,
+        code: z203.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z201.ZodIssueCode.custom,
+    code: z203.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z202 } from "zod";
+import { z as z204 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z202.literal("simulation_unknown_experiment_error"),
+  type: z204.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z202.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z202.string().optional(),
-  subcircuit_id: z202.string().optional()
+  error_type: z204.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z204.string().optional(),
+  subcircuit_id: z204.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z203 } from "zod";
-var simulation_parameter_type = z203.enum([
+import { z as z205 } from "zod";
+var simulation_parameter_type = z205.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z203.object({
-  type: z203.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z205.object({
+  type: z205.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z203.string(),
-  name: z203.string().optional(),
-  parameter_values: z203.array(z203.number()).min(1),
+  simulation_experiment_id: z205.string(),
+  name: z205.string().optional(),
+  parameter_values: z205.array(z205.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z203.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z205.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z203.literal("resistance"),
-    resistor_source_component_id: z203.string()
+    parameter_type: z205.literal("resistance"),
+    resistor_source_component_id: z205.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z203.literal("capacitance"),
-    capacitor_source_component_id: z203.string()
+    parameter_type: z205.literal("capacitance"),
+    capacitor_source_component_id: z205.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z203.literal("inductance"),
-    inductor_source_component_id: z203.string()
+    parameter_type: z205.literal("inductance"),
+    inductor_source_component_id: z205.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z203.literal("voltage"),
-    source_net_id: z203.string()
+    parameter_type: z205.literal("voltage"),
+    source_net_id: z205.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z203.literal("current"),
-    current_source_component_id: z203.string()
+    parameter_type: z205.literal("current"),
+    current_source_component_id: z205.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4733,52 +4866,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z204 } from "zod";
-var simulation_dc_operating_point_voltage = z204.object({
-  type: z204.literal("simulation_dc_operating_point_voltage"),
+import { z as z206 } from "zod";
+var simulation_dc_operating_point_voltage = z206.object({
+  type: z206.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z204.string(),
+  simulation_experiment_id: z206.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z204.string(),
-  voltage: z204.number(),
-  name: z204.string().optional(),
-  color: z204.string().optional()
+  simulation_voltage_probe_id: z206.string(),
+  voltage: z206.number(),
+  name: z206.string().optional(),
+  color: z206.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z205 } from "zod";
-var simulation_dc_operating_point_current = z205.object({
-  type: z205.literal("simulation_dc_operating_point_current"),
+import { z as z207 } from "zod";
+var simulation_dc_operating_point_current = z207.object({
+  type: z207.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z205.string(),
+  simulation_experiment_id: z207.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z205.string(),
-  current: z205.number(),
-  name: z205.string().optional(),
-  color: z205.string().optional()
+  simulation_current_probe_id: z207.string(),
+  current: z207.number(),
+  name: z207.string().optional(),
+  color: z207.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z206 } from "zod";
-var simulation_dc_sweep_voltage_graph = z206.object({
-  type: z206.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z208 } from "zod";
+var simulation_dc_sweep_voltage_graph = z208.object({
+  type: z208.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z206.string(),
+  simulation_experiment_id: z208.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z206.string(),
-  sweep_values: z206.array(z206.number()),
+  simulation_voltage_probe_id: z208.string(),
+  sweep_values: z208.array(z208.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z206.array(z206.number()),
-  name: z206.string().optional(),
-  color: z206.string().optional()
+  voltage_levels: z208.array(z208.number()),
+  name: z208.string().optional(),
+  color: z208.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4788,20 +4921,20 @@ var simulation_dc_sweep_voltage_graph = z206.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z207 } from "zod";
-var simulation_dc_sweep_current_graph = z207.object({
-  type: z207.literal("simulation_dc_sweep_current_graph"),
+import { z as z209 } from "zod";
+var simulation_dc_sweep_current_graph = z209.object({
+  type: z209.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z207.string(),
+  simulation_experiment_id: z209.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z207.string(),
-  sweep_values: z207.array(z207.number()),
+  simulation_current_probe_id: z209.string(),
+  sweep_values: z209.array(z209.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z207.array(z207.number()),
-  name: z207.string().optional(),
-  color: z207.string().optional()
+  current_levels: z209.array(z209.number()),
+  name: z209.string().optional(),
+  color: z209.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4811,29 +4944,29 @@ var simulation_dc_sweep_current_graph = z207.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z209 } from "zod";
+import { z as z211 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z208 } from "zod";
-var simulation_complex_sample = z208.object({
-  re: z208.number(),
-  im: z208.number()
+import { z as z210 } from "zod";
+var simulation_complex_sample = z210.object({
+  re: z210.number(),
+  im: z210.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z209.object({
-  type: z209.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z211.object({
+  type: z211.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z209.string(),
+  simulation_experiment_id: z211.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z209.string(),
-  frequencies_hz: z209.array(z209.number()),
-  complex_voltages: z209.array(simulation_complex_sample),
-  name: z209.string().optional(),
-  color: z209.string().optional()
+  simulation_voltage_probe_id: z211.string(),
+  frequencies_hz: z211.array(z211.number()),
+  complex_voltages: z211.array(simulation_complex_sample),
+  name: z211.string().optional(),
+  color: z211.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4843,19 +4976,19 @@ var simulation_ac_sweep_voltage_graph = z209.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z210 } from "zod";
-var simulation_ac_sweep_current_graph = z210.object({
-  type: z210.literal("simulation_ac_sweep_current_graph"),
+import { z as z212 } from "zod";
+var simulation_ac_sweep_current_graph = z212.object({
+  type: z212.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z210.string(),
+  simulation_experiment_id: z212.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z210.string(),
-  frequencies_hz: z210.array(z210.number()),
-  complex_currents: z210.array(simulation_complex_sample),
-  name: z210.string().optional(),
-  color: z210.string().optional()
+  simulation_current_probe_id: z212.string(),
+  frequencies_hz: z212.array(z212.number()),
+  complex_currents: z212.array(simulation_complex_sample),
+  name: z212.string().optional(),
+  color: z212.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4865,52 +4998,52 @@ var simulation_ac_sweep_current_graph = z210.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z211 } from "zod";
-var simulation_op_amp = z211.object({
-  type: z211.literal("simulation_op_amp"),
+import { z as z213 } from "zod";
+var simulation_op_amp = z213.object({
+  type: z213.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z211.string().optional(),
-  inverting_input_source_port_id: z211.string(),
-  non_inverting_input_source_port_id: z211.string(),
-  output_source_port_id: z211.string(),
-  positive_supply_source_port_id: z211.string(),
-  negative_supply_source_port_id: z211.string()
+  source_component_id: z213.string().optional(),
+  inverting_input_source_port_id: z213.string(),
+  non_inverting_input_source_port_id: z213.string(),
+  output_source_port_id: z213.string(),
+  positive_supply_source_port_id: z213.string(),
+  negative_supply_source_port_id: z213.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z212 } from "zod";
-var simulation_spice_subcircuit = z212.object({
-  type: z212.literal("simulation_spice_subcircuit"),
+import { z as z214 } from "zod";
+var simulation_spice_subcircuit = z214.object({
+  type: z214.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z212.string(),
-  spice_pin_to_source_port_map: z212.record(z212.string(), z212.string()),
-  subcircuit_source: z212.string()
+  source_component_id: z214.string(),
+  spice_pin_to_source_port_map: z214.record(z214.string(), z214.string()),
+  subcircuit_source: z214.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z213 } from "zod";
+import { z as z215 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z213.object({
-  type: z213.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z215.object({
+  type: z215.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z213.string().optional(),
-  simulation_transient_current_graph_id: z213.string().optional(),
-  simulation_voltage_probe_id: z213.string().optional(),
-  simulation_current_probe_id: z213.string().optional(),
-  display_name: z213.string().optional(),
-  color: z213.string().optional(),
-  display_center_value: z213.number().optional(),
-  display_center_offset_divs: z213.number().optional(),
-  volts_per_div: z213.number().positive().optional(),
-  amps_per_div: z213.number().positive().optional()
+  simulation_transient_voltage_graph_id: z215.string().optional(),
+  simulation_transient_current_graph_id: z215.string().optional(),
+  simulation_voltage_probe_id: z215.string().optional(),
+  simulation_current_probe_id: z215.string().optional(),
+  display_name: z215.string().optional(),
+  color: z215.string().optional(),
+  display_center_value: z215.number().optional(),
+  display_center_offset_divs: z215.number().optional(),
+  volts_per_div: z215.number().positive().optional(),
+  amps_per_div: z215.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4924,19 +5057,19 @@ var simulation_oscilloscope_trace = z213.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z213.ZodIssueCode.custom,
+      code: z215.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z213.ZodIssueCode.custom,
+      code: z215.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z213.ZodIssueCode.custom,
+      code: z215.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4944,8 +5077,8 @@ var simulation_oscilloscope_trace = z213.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z214 } from "zod";
-var any_circuit_element = z214.union([
+import { z as z216 } from "zod";
+var any_circuit_element = z216.union([
   source_runtime_error,
   source_trace,
   source_bus,
@@ -5034,6 +5167,8 @@ var any_circuit_element = z214.union([
   pcb_silkscreen_circle,
   pcb_silkscreen_oval,
   pcb_silkscreen_graphic,
+  pcb_bus_routing_constraint_error,
+  pcb_bus_routing_constraint_warning,
   pcb_trace_error,
   pcb_trace_missing_error,
   pcb_placement_error,
@@ -5180,6 +5315,8 @@ export {
   pcb_board,
   pcb_breakout_point,
   pcb_bus_length_skew_error,
+  pcb_bus_routing_constraint_error,
+  pcb_bus_routing_constraint_warning,
   pcb_component,
   pcb_component_invalid_layer_error,
   pcb_component_missing_courtyard_warning,