circuit-json 0.0.507 → 0.0.509

package/dist/index.mjs

@@ -417,6 +417,18 @@ expectTypesMatch(true);
 // src/source/properties/source_pin_attributes.ts
 import { z as z25 } from "zod";
 var source_pin_attributes = z25.object({
+  is_input: z25.boolean().optional(),
+  is_output: z25.boolean().optional(),
+  is_bidirectional: z25.boolean().optional(),
+  is_passive: z25.boolean().optional(),
+  can_use_tri_state: z25.boolean().optional(),
+  is_using_tri_state: z25.boolean().optional(),
+  can_use_open_collector: z25.boolean().optional(),
+  is_using_open_collector: z25.boolean().optional(),
+  can_use_open_emitter: z25.boolean().optional(),
+  is_using_open_emitter: z25.boolean().optional(),
+  is_gpio: z25.boolean().optional(),
+  highlight_color: z25.string().optional(),
   must_be_connected: z25.boolean().optional(),
   provides_power: z25.boolean().optional(),
   requires_power: z25.boolean().optional(),
@@ -4162,10 +4174,26 @@ var cad_component = z188.object({
 }).describe("Defines CAD geometry, optionally associated with a PCB component");
 expectTypesMatch(true);
 
-// src/simulation/simulation_voltage_source.ts
+// src/cad/cad_collision_error.ts
 import { z as z189 } from "zod";
-var wave_shape = z189.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z189.union([z189.string(), z189.number()]).transform((val) => {
+var cad_collision_error = base_circuit_json_error.extend({
+  type: z189.literal("cad_collision_error"),
+  cad_collision_error_id: getZodPrefixedIdWithDefault("cad_collision_error"),
+  error_type: z189.literal("cad_collision_error").default("cad_collision_error"),
+  cad_component_ids: z189.array(z189.string()).min(1),
+  pcb_component_ids: z189.array(z189.string()).optional(),
+  source_component_ids: z189.array(z189.string()).min(1),
+  intersection_area_mm2: z189.number().finite().nonnegative(),
+  threshold_area_mm2: z189.number().finite().nonnegative()
+}).describe(
+  "An aperture-bearing part intersects the finished enclosure. The intersection_area_mm2 is the union silhouette area of the solid intersection projected along the aperture face normal, in the right-handed Circuit JSON world frame (+X right, +Y top, +Z above). It is an area in square millimetres, not intersection volume or surface area. This indicates possible aperture misplacement, insufficient size/depth, or body clearance problems; it does not prove which cause applies."
+);
+expectTypesMatch(true);
+
+// src/simulation/simulation_voltage_source.ts
+import { z as z190 } from "zod";
+var wave_shape = z190.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z190.union([z190.string(), z190.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4174,32 +4202,32 @@ var percentage = z189.union([z189.string(), z189.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z189.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z190.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z189.object({
-  type: z189.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z190.object({
+  type: z190.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z189.literal(true).optional().default(true),
-  positive_source_port_id: z189.string().optional(),
-  negative_source_port_id: z189.string().optional(),
-  positive_source_net_id: z189.string().optional(),
-  negative_source_net_id: z189.string().optional(),
+  is_dc_source: z190.literal(true).optional().default(true),
+  positive_source_port_id: z190.string().optional(),
+  negative_source_port_id: z190.string().optional(),
+  positive_source_net_id: z190.string().optional(),
+  negative_source_net_id: z190.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z189.object({
-  type: z189.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z190.object({
+  type: z190.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z189.literal(false),
-  terminal1_source_port_id: z189.string().optional(),
-  terminal2_source_port_id: z189.string().optional(),
-  terminal1_source_net_id: z189.string().optional(),
-  terminal2_source_net_id: z189.string().optional(),
+  is_dc_source: z190.literal(false),
+  terminal1_source_port_id: z190.string().optional(),
+  terminal2_source_port_id: z190.string().optional(),
+  terminal1_source_net_id: z190.string().optional(),
+  terminal2_source_net_id: z190.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4214,14 +4242,14 @@ var simulation_ac_voltage_source = z189.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z189.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z190.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z190 } from "zod";
-var percentage2 = z190.union([z190.string(), z190.number()]).transform((val) => {
+import { z as z191 } from "zod";
+var percentage2 = z191.union([z191.string(), z191.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4230,32 +4258,32 @@ var percentage2 = z190.union([z190.string(), z190.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z190.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z191.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z190.object({
-  type: z190.literal("simulation_current_source"),
+var simulation_dc_current_source = z191.object({
+  type: z191.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z190.literal(true).optional().default(true),
-  positive_source_port_id: z190.string().optional(),
-  negative_source_port_id: z190.string().optional(),
-  positive_source_net_id: z190.string().optional(),
-  negative_source_net_id: z190.string().optional(),
+  is_dc_source: z191.literal(true).optional().default(true),
+  positive_source_port_id: z191.string().optional(),
+  negative_source_port_id: z191.string().optional(),
+  positive_source_net_id: z191.string().optional(),
+  negative_source_net_id: z191.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z190.object({
-  type: z190.literal("simulation_current_source"),
+var simulation_ac_current_source = z191.object({
+  type: z191.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z190.literal(false),
-  terminal1_source_port_id: z190.string().optional(),
-  terminal2_source_port_id: z190.string().optional(),
-  terminal1_source_net_id: z190.string().optional(),
-  terminal2_source_net_id: z190.string().optional(),
+  is_dc_source: z191.literal(false),
+  terminal1_source_port_id: z191.string().optional(),
+  terminal2_source_port_id: z191.string().optional(),
+  terminal1_source_net_id: z191.string().optional(),
+  terminal2_source_net_id: z191.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4265,58 +4293,58 @@ var simulation_ac_current_source = z190.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z190.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z191.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z192 } from "zod";
+import { z as z193 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z191 } from "zod";
-var simulation_dc_sweep_unit = z191.custom(
+import { z as z192 } from "zod";
+var simulation_dc_sweep_unit = z192.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z191.custom(
+var simulation_parameter_unit = z192.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z192.union([
-  z192.literal("spice_dc_sweep"),
-  z192.literal("spice_dc_operating_point"),
-  z192.literal("spice_transient_analysis"),
-  z192.literal("spice_ac_analysis")
+var experiment_type = z193.union([
+  z193.literal("spice_dc_sweep"),
+  z193.literal("spice_dc_operating_point"),
+  z193.literal("spice_transient_analysis"),
+  z193.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z192.object({
-  method: z192.enum(["trap", "gear"]).optional(),
-  reltol: z192.union([z192.number(), z192.string()]).optional(),
-  abstol: z192.union([z192.number(), z192.string()]).optional(),
-  vntol: z192.union([z192.number(), z192.string()]).optional()
+var spice_simulation_options = z193.object({
+  method: z193.enum(["trap", "gear"]).optional(),
+  reltol: z193.union([z193.number(), z193.string()]).optional(),
+  abstol: z193.union([z193.number(), z193.string()]).optional(),
+  vntol: z193.union([z193.number(), z193.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z192.object({
-  type: z192.literal("simulation_experiment"),
+var simulation_experiment = z193.object({
+  type: z193.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z192.string(),
+  name: z193.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z192.string().optional(),
-  dc_sweep_current_source_id: z192.string().optional(),
-  dc_sweep_start: z192.number().optional(),
-  dc_sweep_stop: z192.number().optional(),
-  dc_sweep_step: z192.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z193.string().optional(),
+  dc_sweep_current_source_id: z193.string().optional(),
+  dc_sweep_start: z193.number().optional(),
+  dc_sweep_stop: z193.number().optional(),
+  dc_sweep_step: z193.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z192.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z192.number().int().positive().optional(),
-  ac_sample_count: z192.number().int().positive().optional(),
-  ac_start_frequency_hz: z192.number().positive().optional(),
-  ac_stop_frequency_hz: z192.number().positive().optional()
+  ac_sweep_type: z193.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z193.number().int().positive().optional(),
+  ac_sample_count: z193.number().int().positive().optional(),
+  ac_start_frequency_hz: z193.number().positive().optional(),
+  ac_stop_frequency_hz: z193.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4328,7 +4356,7 @@ var simulation_experiment = z192.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z192.ZodIssueCode.custom,
+          code: z193.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4338,7 +4366,7 @@ var simulation_experiment = z192.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4347,35 +4375,35 @@ var simulation_experiment = z192.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z192.ZodIssueCode.custom,
+        code: z193.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4385,87 +4413,87 @@ var simulation_experiment = z192.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z194 } from "zod";
+import { z as z195 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z193 } from "zod";
-var simulation_parameter_sweep_coordinate = z193.object({
-  simulation_parameter_sweep_id: z193.string(),
-  sweep_index: z193.number().int().nonnegative(),
-  parameter_value: z193.number(),
+import { z as z194 } from "zod";
+var simulation_parameter_sweep_coordinate = z194.object({
+  simulation_parameter_sweep_id: z194.string(),
+  sweep_index: z194.number().int().nonnegative(),
+  parameter_value: z194.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z194.object({
-  type: z194.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z195.object({
+  type: z195.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z194.string(),
+  simulation_experiment_id: z195.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z194.array(z194.number()).optional(),
-  voltage_levels: z194.array(z194.number()),
-  source_component_id: z194.string().optional(),
-  subcircuit_connectivity_map_key: z194.string().optional(),
+  timestamps_ms: z195.array(z195.number()).optional(),
+  voltage_levels: z195.array(z195.number()),
+  source_component_id: z195.string().optional(),
+  subcircuit_connectivity_map_key: z195.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z194.string().optional(),
-  color: z194.string().optional()
+  name: z195.string().optional(),
+  color: z195.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z195 } from "zod";
-var simulation_transient_current_graph = z195.object({
-  type: z195.literal("simulation_transient_current_graph"),
+import { z as z196 } from "zod";
+var simulation_transient_current_graph = z196.object({
+  type: z196.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z195.string(),
+  simulation_experiment_id: z196.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z195.array(z195.number()).optional(),
-  current_levels: z195.array(z195.number()),
-  source_component_id: z195.string().optional(),
-  subcircuit_connectivity_map_key: z195.string().optional(),
+  timestamps_ms: z196.array(z196.number()).optional(),
+  current_levels: z196.array(z196.number()),
+  source_component_id: z196.string().optional(),
+  subcircuit_connectivity_map_key: z196.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z195.string().optional(),
-  color: z195.string().optional()
+  name: z196.string().optional(),
+  color: z196.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z196 } from "zod";
-var simulation_switch = z196.object({
-  type: z196.literal("simulation_switch"),
+import { z as z197 } from "zod";
+var simulation_switch = z197.object({
+  type: z197.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z196.string().optional(),
+  source_component_id: z197.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z196.boolean().optional(),
+  starts_closed: z197.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z197 } from "zod";
-var simulation_voltage_probe = z197.object({
-  type: z197.literal("simulation_voltage_probe"),
+import { z as z198 } from "zod";
+var simulation_voltage_probe = z198.object({
+  type: z198.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z197.string().optional(),
-  name: z197.string().optional(),
-  signal_input_source_port_id: z197.string().optional(),
-  signal_input_source_net_id: z197.string().optional(),
-  reference_input_source_port_id: z197.string().optional(),
-  reference_input_source_net_id: z197.string().optional(),
-  subcircuit_id: z197.string().optional(),
-  color: z197.string().optional()
+  source_component_id: z198.string().optional(),
+  name: z198.string().optional(),
+  signal_input_source_port_id: z198.string().optional(),
+  signal_input_source_net_id: z198.string().optional(),
+  reference_input_source_port_id: z198.string().optional(),
+  reference_input_source_net_id: z198.string().optional(),
+  subcircuit_id: z198.string().optional(),
+  color: z198.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4475,20 +4503,20 @@ var simulation_voltage_probe = z197.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z197.ZodIssueCode.custom,
+        code: z198.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z197.ZodIssueCode.custom,
+          code: z198.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z197.ZodIssueCode.custom,
+          code: z198.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4496,7 +4524,7 @@ var simulation_voltage_probe = z197.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z197.ZodIssueCode.custom,
+        code: z198.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4505,20 +4533,20 @@ var simulation_voltage_probe = z197.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z198 } from "zod";
-var simulation_current_probe = z198.object({
-  type: z198.literal("simulation_current_probe"),
+import { z as z199 } from "zod";
+var simulation_current_probe = z199.object({
+  type: z199.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z198.string().optional(),
-  name: z198.string().optional(),
-  positive_source_port_id: z198.string().optional(),
-  negative_source_port_id: z198.string().optional(),
-  positive_source_net_id: z198.string().optional(),
-  negative_source_net_id: z198.string().optional(),
-  subcircuit_id: z198.string().optional(),
-  color: z198.string().optional()
+  source_component_id: z199.string().optional(),
+  name: z199.string().optional(),
+  positive_source_port_id: z199.string().optional(),
+  negative_source_port_id: z199.string().optional(),
+  positive_source_net_id: z199.string().optional(),
+  negative_source_net_id: z199.string().optional(),
+  subcircuit_id: z199.string().optional(),
+  color: z199.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -4530,7 +4558,7 @@ var simulation_current_probe = z198.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z198.ZodIssueCode.custom,
+      code: z199.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -4538,7 +4566,7 @@ var simulation_current_probe = z198.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z198.ZodIssueCode.custom,
+        code: z199.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -4547,71 +4575,71 @@ var simulation_current_probe = z198.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z198.ZodIssueCode.custom,
+        code: z199.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z198.ZodIssueCode.custom,
+    code: z199.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z199 } from "zod";
+import { z as z200 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z199.literal("simulation_unknown_experiment_error"),
+  type: z200.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z199.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z199.string().optional(),
-  subcircuit_id: z199.string().optional()
+  error_type: z200.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z200.string().optional(),
+  subcircuit_id: z200.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z200 } from "zod";
-var simulation_parameter_type = z200.enum([
+import { z as z201 } from "zod";
+var simulation_parameter_type = z201.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z200.object({
-  type: z200.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z201.object({
+  type: z201.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z200.string(),
-  name: z200.string().optional(),
-  parameter_values: z200.array(z200.number()).min(1),
+  simulation_experiment_id: z201.string(),
+  name: z201.string().optional(),
+  parameter_values: z201.array(z201.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z200.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z201.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z200.literal("resistance"),
-    resistor_source_component_id: z200.string()
+    parameter_type: z201.literal("resistance"),
+    resistor_source_component_id: z201.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z200.literal("capacitance"),
-    capacitor_source_component_id: z200.string()
+    parameter_type: z201.literal("capacitance"),
+    capacitor_source_component_id: z201.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z200.literal("inductance"),
-    inductor_source_component_id: z200.string()
+    parameter_type: z201.literal("inductance"),
+    inductor_source_component_id: z201.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z200.literal("voltage"),
-    source_net_id: z200.string()
+    parameter_type: z201.literal("voltage"),
+    source_net_id: z201.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z200.literal("current"),
-    current_source_component_id: z200.string()
+    parameter_type: z201.literal("current"),
+    current_source_component_id: z201.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4619,52 +4647,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z201 } from "zod";
-var simulation_dc_operating_point_voltage = z201.object({
-  type: z201.literal("simulation_dc_operating_point_voltage"),
+import { z as z202 } from "zod";
+var simulation_dc_operating_point_voltage = z202.object({
+  type: z202.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z201.string(),
+  simulation_experiment_id: z202.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z201.string(),
-  voltage: z201.number(),
-  name: z201.string().optional(),
-  color: z201.string().optional()
+  simulation_voltage_probe_id: z202.string(),
+  voltage: z202.number(),
+  name: z202.string().optional(),
+  color: z202.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z202 } from "zod";
-var simulation_dc_operating_point_current = z202.object({
-  type: z202.literal("simulation_dc_operating_point_current"),
+import { z as z203 } from "zod";
+var simulation_dc_operating_point_current = z203.object({
+  type: z203.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z202.string(),
+  simulation_experiment_id: z203.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z202.string(),
-  current: z202.number(),
-  name: z202.string().optional(),
-  color: z202.string().optional()
+  simulation_current_probe_id: z203.string(),
+  current: z203.number(),
+  name: z203.string().optional(),
+  color: z203.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z203 } from "zod";
-var simulation_dc_sweep_voltage_graph = z203.object({
-  type: z203.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z204 } from "zod";
+var simulation_dc_sweep_voltage_graph = z204.object({
+  type: z204.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z203.string(),
+  simulation_experiment_id: z204.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z203.string(),
-  sweep_values: z203.array(z203.number()),
+  simulation_voltage_probe_id: z204.string(),
+  sweep_values: z204.array(z204.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z203.array(z203.number()),
-  name: z203.string().optional(),
-  color: z203.string().optional()
+  voltage_levels: z204.array(z204.number()),
+  name: z204.string().optional(),
+  color: z204.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4674,20 +4702,20 @@ var simulation_dc_sweep_voltage_graph = z203.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z204 } from "zod";
-var simulation_dc_sweep_current_graph = z204.object({
-  type: z204.literal("simulation_dc_sweep_current_graph"),
+import { z as z205 } from "zod";
+var simulation_dc_sweep_current_graph = z205.object({
+  type: z205.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z204.string(),
+  simulation_experiment_id: z205.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z204.string(),
-  sweep_values: z204.array(z204.number()),
+  simulation_current_probe_id: z205.string(),
+  sweep_values: z205.array(z205.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z204.array(z204.number()),
-  name: z204.string().optional(),
-  color: z204.string().optional()
+  current_levels: z205.array(z205.number()),
+  name: z205.string().optional(),
+  color: z205.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4697,29 +4725,29 @@ var simulation_dc_sweep_current_graph = z204.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z206 } from "zod";
+import { z as z207 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z205 } from "zod";
-var simulation_complex_sample = z205.object({
-  re: z205.number(),
-  im: z205.number()
+import { z as z206 } from "zod";
+var simulation_complex_sample = z206.object({
+  re: z206.number(),
+  im: z206.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z206.object({
-  type: z206.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z207.object({
+  type: z207.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z206.string(),
+  simulation_experiment_id: z207.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z206.string(),
-  frequencies_hz: z206.array(z206.number()),
-  complex_voltages: z206.array(simulation_complex_sample),
-  name: z206.string().optional(),
-  color: z206.string().optional()
+  simulation_voltage_probe_id: z207.string(),
+  frequencies_hz: z207.array(z207.number()),
+  complex_voltages: z207.array(simulation_complex_sample),
+  name: z207.string().optional(),
+  color: z207.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4729,19 +4757,19 @@ var simulation_ac_sweep_voltage_graph = z206.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z207 } from "zod";
-var simulation_ac_sweep_current_graph = z207.object({
-  type: z207.literal("simulation_ac_sweep_current_graph"),
+import { z as z208 } from "zod";
+var simulation_ac_sweep_current_graph = z208.object({
+  type: z208.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z207.string(),
+  simulation_experiment_id: z208.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z207.string(),
-  frequencies_hz: z207.array(z207.number()),
-  complex_currents: z207.array(simulation_complex_sample),
-  name: z207.string().optional(),
-  color: z207.string().optional()
+  simulation_current_probe_id: z208.string(),
+  frequencies_hz: z208.array(z208.number()),
+  complex_currents: z208.array(simulation_complex_sample),
+  name: z208.string().optional(),
+  color: z208.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4751,52 +4779,52 @@ var simulation_ac_sweep_current_graph = z207.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z208 } from "zod";
-var simulation_op_amp = z208.object({
-  type: z208.literal("simulation_op_amp"),
+import { z as z209 } from "zod";
+var simulation_op_amp = z209.object({
+  type: z209.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z208.string().optional(),
-  inverting_input_source_port_id: z208.string(),
-  non_inverting_input_source_port_id: z208.string(),
-  output_source_port_id: z208.string(),
-  positive_supply_source_port_id: z208.string(),
-  negative_supply_source_port_id: z208.string()
+  source_component_id: z209.string().optional(),
+  inverting_input_source_port_id: z209.string(),
+  non_inverting_input_source_port_id: z209.string(),
+  output_source_port_id: z209.string(),
+  positive_supply_source_port_id: z209.string(),
+  negative_supply_source_port_id: z209.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z209 } from "zod";
-var simulation_spice_subcircuit = z209.object({
-  type: z209.literal("simulation_spice_subcircuit"),
+import { z as z210 } from "zod";
+var simulation_spice_subcircuit = z210.object({
+  type: z210.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z209.string(),
-  spice_pin_to_source_port_map: z209.record(z209.string(), z209.string()),
-  subcircuit_source: z209.string()
+  source_component_id: z210.string(),
+  spice_pin_to_source_port_map: z210.record(z210.string(), z210.string()),
+  subcircuit_source: z210.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z210 } from "zod";
+import { z as z211 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z210.object({
-  type: z210.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z211.object({
+  type: z211.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z210.string().optional(),
-  simulation_transient_current_graph_id: z210.string().optional(),
-  simulation_voltage_probe_id: z210.string().optional(),
-  simulation_current_probe_id: z210.string().optional(),
-  display_name: z210.string().optional(),
-  color: z210.string().optional(),
-  display_center_value: z210.number().optional(),
-  display_center_offset_divs: z210.number().optional(),
-  volts_per_div: z210.number().positive().optional(),
-  amps_per_div: z210.number().positive().optional()
+  simulation_transient_voltage_graph_id: z211.string().optional(),
+  simulation_transient_current_graph_id: z211.string().optional(),
+  simulation_voltage_probe_id: z211.string().optional(),
+  simulation_current_probe_id: z211.string().optional(),
+  display_name: z211.string().optional(),
+  color: z211.string().optional(),
+  display_center_value: z211.number().optional(),
+  display_center_offset_divs: z211.number().optional(),
+  volts_per_div: z211.number().positive().optional(),
+  amps_per_div: z211.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4810,19 +4838,19 @@ var simulation_oscilloscope_trace = z210.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z210.ZodIssueCode.custom,
+      code: z211.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z210.ZodIssueCode.custom,
+      code: z211.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z210.ZodIssueCode.custom,
+      code: z211.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4830,8 +4858,8 @@ var simulation_oscilloscope_trace = z210.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z211 } from "zod";
-var any_circuit_element = z211.union([
+import { z as z212 } from "zod";
+var any_circuit_element = z212.union([
   source_runtime_error,
   source_trace,
   source_bus,
@@ -4984,6 +5012,7 @@ var any_circuit_element = z211.union([
   schematic_table,
   schematic_table_cell,
   cad_component,
+  cad_collision_error,
   simulation_voltage_source,
   simulation_current_source,
   simulation_experiment,
@@ -5017,6 +5046,7 @@ export {
   battery_capacity,
   brep_shape,
   cadModelDefaultDirectionMap,
+  cad_collision_error,
   cad_component,
   cad_model_axis_directions,
   cad_model_formats,