circuit-json 0.0.492 → 0.0.494

package/dist/index.mjs

@@ -2749,6 +2749,8 @@ var pcb_via = z127.object({
   /** @deprecated */
   to_layer: layer_ref.optional(),
   layers: z127.array(layer_ref),
+  /** PCB ports belonging to this via, including layer ports and aliases. */
+  pcb_port_ids: z127.array(z127.string()).optional(),
   pcb_trace_id: z127.string().optional(),
   source_trace_id: z127.string().optional(),
   source_net_id: z127.string().min(1).optional(),
@@ -3292,7 +3294,8 @@ var pcb_keepout_outline = z154.object({
   pcb_keepout_id: z154.string(),
   layers: z154.array(z154.string()),
   description: z154.string().optional(),
-  excluded_pcb_component_ids: z154.array(z154.string()).optional()
+  excluded_pcb_component_ids: z154.array(z154.string()).optional(),
+  warning_only: z154.boolean().optional()
 });
 var pcb_keepout = z154.object({
   type: z154.literal("pcb_keepout"),
@@ -3307,7 +3310,8 @@ var pcb_keepout = z154.object({
   // Specify layers where the keepout applies
   description: z154.string().optional(),
   // Optional description of the keepout
-  excluded_pcb_component_ids: z154.array(z154.string()).optional()
+  excluded_pcb_component_ids: z154.array(z154.string()).optional(),
+  warning_only: z154.boolean().optional()
 }).or(
   z154.object({
     type: z154.literal("pcb_keepout"),
@@ -3321,25 +3325,50 @@ var pcb_keepout = z154.object({
     // Specify layers where the keepout applies
     description: z154.string().optional(),
     // Optional description of the keepout
-    excluded_pcb_component_ids: z154.array(z154.string()).optional()
+    excluded_pcb_component_ids: z154.array(z154.string()).optional(),
+    warning_only: z154.boolean().optional()
   })
 ).or(pcb_keepout_outline);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
-// src/pcb/pcb_cutout.ts
+// src/pcb/pcb_keepout_overlap_warning.ts
 import { z as z155 } from "zod";
-var pcb_cutout_base = z155.object({
-  type: z155.literal("pcb_cutout"),
+var pcb_keepout_overlap_warning = z155.object({
+  type: z155.literal("pcb_keepout_overlap_warning"),
+  pcb_keepout_overlap_warning_id: getZodPrefixedIdWithDefault(
+    "pcb_keepout_overlap_warning"
+  ),
+  warning_type: z155.literal("pcb_keepout_overlap_warning").default("pcb_keepout_overlap_warning"),
+  message: z155.string(),
+  pcb_keepout_id: z155.string(),
+  pcb_component_ids: z155.array(z155.string()).optional(),
+  pcb_trace_ids: z155.array(z155.string()).optional(),
+  pcb_smtpad_ids: z155.array(z155.string()).optional(),
+  pcb_plated_hole_ids: z155.array(z155.string()).optional(),
+  pcb_via_ids: z155.array(z155.string()).optional(),
+  center: point.optional(),
+  subcircuit_id: z155.string().optional()
+}).describe(
+  "Warning emitted when copper overlaps a PCB keepout with warning_only enabled"
+);
+expectTypesMatch(
+  true
+);
+
+// src/pcb/pcb_cutout.ts
+import { z as z156 } from "zod";
+var pcb_cutout_base = z156.object({
+  type: z156.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_component_id: z155.string().optional(),
-  pcb_group_id: z155.string().optional(),
-  subcircuit_id: z155.string().optional(),
-  pcb_board_id: z155.string().optional(),
-  pcb_panel_id: z155.string().optional()
+  pcb_component_id: z156.string().optional(),
+  pcb_group_id: z156.string().optional(),
+  subcircuit_id: z156.string().optional(),
+  pcb_board_id: z156.string().optional(),
+  pcb_panel_id: z156.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z155.literal("rect"),
+  shape: z156.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3348,26 +3377,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z155.literal("circle"),
+  shape: z156.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z155.literal("polygon"),
-  points: z155.array(point)
+  shape: z156.literal("polygon"),
+  points: z156.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z155.literal("path"),
-  route: z155.array(point),
+  shape: z156.literal("path"),
+  route: z156.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z155.discriminatedUnion("shape", [
+var pcb_cutout = z156.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3376,223 +3405,223 @@ var pcb_cutout = z155.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z156 } from "zod";
+import { z as z157 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z156.literal("pcb_missing_footprint_error"),
+  type: z157.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z156.string().optional(),
-  subcircuit_id: z156.string().optional(),
-  error_type: z156.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z156.string()
+  pcb_group_id: z157.string().optional(),
+  subcircuit_id: z157.string().optional(),
+  error_type: z157.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z157.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z157 } from "zod";
+import { z as z158 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z157.literal("external_footprint_load_error"),
+  type: z158.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z157.string(),
-  source_component_id: z157.string(),
-  pcb_group_id: z157.string().optional(),
-  subcircuit_id: z157.string().optional(),
-  footprinter_string: z157.string().optional(),
-  error_type: z157.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z158.string(),
+  source_component_id: z158.string(),
+  pcb_group_id: z158.string().optional(),
+  subcircuit_id: z158.string().optional(),
+  footprinter_string: z158.string().optional(),
+  error_type: z158.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z158 } from "zod";
+import { z as z159 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z158.literal("circuit_json_footprint_load_error"),
+  type: z159.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z158.string(),
-  source_component_id: z158.string(),
-  pcb_group_id: z158.string().optional(),
-  subcircuit_id: z158.string().optional(),
-  error_type: z158.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z158.array(z158.any()).optional()
+  pcb_component_id: z159.string(),
+  source_component_id: z159.string(),
+  pcb_group_id: z159.string().optional(),
+  subcircuit_id: z159.string().optional(),
+  error_type: z159.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z159.array(z159.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z159 } from "zod";
-var pcb_group = z159.object({
-  type: z159.literal("pcb_group"),
+import { z as z160 } from "zod";
+var pcb_group = z160.object({
+  type: z160.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z159.string(),
-  is_subcircuit: z159.boolean().optional(),
-  subcircuit_id: z159.string().optional(),
+  source_group_id: z160.string(),
+  is_subcircuit: z160.boolean().optional(),
+  subcircuit_id: z160.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z159.string().optional().describe(
+  display_offset_x: z160.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z159.string().optional().describe(
+  display_offset_y: z160.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z159.array(point).optional(),
+  outline: z160.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z159.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z159.string().optional(),
-  positioned_relative_to_pcb_board_id: z159.string().optional(),
-  pcb_component_ids: z159.array(z159.string()),
-  child_layout_mode: z159.enum(["packed", "none"]).optional(),
-  name: z159.string().optional(),
-  description: z159.string().optional(),
-  layout_mode: z159.string().optional(),
-  autorouter_configuration: z159.object({
+  position_mode: z160.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z160.string().optional(),
+  positioned_relative_to_pcb_board_id: z160.string().optional(),
+  pcb_component_ids: z160.array(z160.string()),
+  child_layout_mode: z160.enum(["packed", "none"]).optional(),
+  name: z160.string().optional(),
+  description: z160.string().optional(),
+  layout_mode: z160.string().optional(),
+  autorouter_configuration: z160.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z159.string().optional()
+  autorouter_used_string: z160.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z160 } from "zod";
+import { z as z161 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z160.literal("pcb_autorouting_error"),
+  type: z161.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z160.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z160.string().optional()
+  error_type: z161.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z161.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_preflight_routing_error.ts
-import { z as z161 } from "zod";
+import { z as z162 } from "zod";
 var pcb_preflight_routing_error = base_circuit_json_error.extend({
-  type: z161.literal("pcb_preflight_routing_error"),
+  type: z162.literal("pcb_preflight_routing_error"),
   pcb_preflight_routing_error_id: getZodPrefixedIdWithDefault(
     "pcb_preflight_routing_error"
   ),
-  error_type: z161.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
-  error_code: z161.string(),
-  subcircuit_id: z161.string().optional(),
-  pcb_group_id: z161.string().optional(),
-  routing_phase_index: z161.number().int().optional(),
-  phase_name: z161.string().optional(),
-  source_trace_ids: z161.array(z161.string()).optional(),
-  pcb_component_ids: z161.array(z161.string()).optional(),
-  pcb_port_ids: z161.array(z161.string()).optional(),
-  related_error_ids: z161.array(z161.string()).optional(),
-  measurements: z161.record(z161.number().finite()).optional()
+  error_type: z162.literal("pcb_preflight_routing_error").default("pcb_preflight_routing_error"),
+  error_code: z162.string(),
+  subcircuit_id: z162.string().optional(),
+  pcb_group_id: z162.string().optional(),
+  routing_phase_index: z162.number().int().optional(),
+  phase_name: z162.string().optional(),
+  source_trace_ids: z162.array(z162.string()).optional(),
+  pcb_component_ids: z162.array(z162.string()).optional(),
+  pcb_port_ids: z162.array(z162.string()).optional(),
+  related_error_ids: z162.array(z162.string()).optional(),
+  measurements: z162.record(z162.number().finite()).optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z162 } from "zod";
-var pcb_manual_edit_conflict_warning = z162.object({
-  type: z162.literal("pcb_manual_edit_conflict_warning"),
+import { z as z163 } from "zod";
+var pcb_manual_edit_conflict_warning = z163.object({
+  type: z163.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z162.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z162.string(),
-  pcb_component_id: z162.string(),
-  pcb_group_id: z162.string().optional(),
-  subcircuit_id: z162.string().optional(),
-  source_component_id: z162.string()
+  warning_type: z163.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z163.string(),
+  pcb_component_id: z163.string(),
+  pcb_group_id: z163.string().optional(),
+  subcircuit_id: z163.string().optional(),
+  source_component_id: z163.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z163 } from "zod";
-var connectorOrientationDirection = z163.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z163.object({
-  type: z163.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z164 } from "zod";
+var connectorOrientationDirection = z164.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z164.object({
+  type: z164.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z163.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z163.string(),
-  pcb_component_id: z163.string(),
-  source_component_id: z163.string().optional(),
-  pcb_board_id: z163.string().optional(),
+  warning_type: z164.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z164.string(),
+  pcb_component_id: z164.string(),
+  source_component_id: z164.string().optional(),
+  pcb_board_id: z164.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z163.string().optional()
+  subcircuit_id: z164.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_missing_courtyard_warning.ts
-import { z as z164 } from "zod";
-var pcb_component_missing_courtyard_warning = z164.object({
-  type: z164.literal("pcb_component_missing_courtyard_warning"),
+import { z as z165 } from "zod";
+var pcb_component_missing_courtyard_warning = z165.object({
+  type: z165.literal("pcb_component_missing_courtyard_warning"),
   pcb_component_missing_courtyard_warning_id: getZodPrefixedIdWithDefault(
     "pcb_component_missing_courtyard_warning"
   ),
-  warning_type: z164.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
-  message: z164.string(),
-  pcb_component_id: z164.string(),
-  source_component_id: z164.string().optional(),
-  subcircuit_id: z164.string().optional()
+  warning_type: z165.literal("pcb_component_missing_courtyard_warning").default("pcb_component_missing_courtyard_warning"),
+  message: z165.string(),
+  pcb_component_id: z165.string(),
+  source_component_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional()
 }).describe("Warning emitted when a PCB component has no courtyard geometry");
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z165 } from "zod";
-var supplier_footprint_mismatch_warning = z165.object({
-  type: z165.literal("supplier_footprint_mismatch_warning"),
+import { z as z166 } from "zod";
+var supplier_footprint_mismatch_warning = z166.object({
+  type: z166.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z165.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z165.string(),
-  source_component_id: z165.string(),
-  pcb_component_id: z165.string().optional(),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
+  warning_type: z166.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z166.string(),
+  source_component_id: z166.string(),
+  pcb_component_id: z166.string().optional(),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z165.string().optional(),
-  supplier_footprint_url: z165.string().optional(),
-  footprint_copper_intersection_over_union: z165.number()
+  supplier_part_number: z166.string().optional(),
+  supplier_footprint_url: z166.string().optional(),
+  footprint_copper_intersection_over_union: z166.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabricator_extra_charge_warning.ts
-import { z as z166 } from "zod";
-var pcb_fabricator_extra_charge_warning = z166.object({
-  type: z166.literal("pcb_fabricator_extra_charge_warning"),
+import { z as z167 } from "zod";
+var pcb_fabricator_extra_charge_warning = z167.object({
+  type: z167.literal("pcb_fabricator_extra_charge_warning"),
   pcb_fabricator_extra_charge_warning_id: getZodPrefixedIdWithDefault(
     "pcb_fabricator_extra_charge_warning"
   ),
-  warning_type: z166.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
-  message: z166.string(),
-  fabricator_preset: z166.string(),
-  pcb_board_id: z166.string().optional(),
-  pcb_via_ids: z166.array(z166.string()).optional(),
-  subcircuit_id: z166.string().optional()
+  warning_type: z167.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
+  message: z167.string(),
+  fabricator_preset: z167.string(),
+  pcb_board_id: z167.string().optional(),
+  pcb_via_ids: z167.array(z167.string()).optional(),
+  subcircuit_id: z167.string().optional()
 }).describe(
   "Warning that a design feature incurs an extra charge for the selected fabricator preset, such as via hole diameters below 0.3 mm with JLCPCB economy or standard presets."
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z167 } from "zod";
-var pcb_breakout_point = z167.object({
-  type: z167.literal("pcb_breakout_point"),
+import { z as z168 } from "zod";
+var pcb_breakout_point = z168.object({
+  type: z168.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z167.string(),
-  subcircuit_id: z167.string().optional(),
-  source_trace_id: z167.string().optional(),
-  source_port_id: z167.string().optional(),
-  source_net_id: z167.string().optional(),
+  pcb_group_id: z168.string(),
+  subcircuit_id: z168.string().optional(),
+  source_trace_id: z168.string().optional(),
+  source_port_id: z168.string().optional(),
+  source_net_id: z168.string().optional(),
   layer: layer_ref.optional(),
   x: distance,
   y: distance
@@ -3602,61 +3631,61 @@ var pcb_breakout_point = z167.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z168 } from "zod";
-var pcb_ground_plane = z168.object({
-  type: z168.literal("pcb_ground_plane"),
+import { z as z169 } from "zod";
+var pcb_ground_plane = z169.object({
+  type: z169.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z168.string(),
-  source_net_id: z168.string(),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional()
+  source_pcb_ground_plane_id: z169.string(),
+  source_net_id: z169.string(),
+  pcb_group_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z169 } from "zod";
-var pcb_ground_plane_region = z169.object({
-  type: z169.literal("pcb_ground_plane_region"),
+import { z as z170 } from "zod";
+var pcb_ground_plane_region = z170.object({
+  type: z170.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z169.string(),
-  pcb_group_id: z169.string().optional(),
-  subcircuit_id: z169.string().optional(),
+  pcb_ground_plane_id: z170.string(),
+  pcb_group_id: z170.string().optional(),
+  subcircuit_id: z170.string().optional(),
   layer: layer_ref,
-  points: z169.array(point)
+  points: z170.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z170 } from "zod";
-var pcb_thermal_spoke = z170.object({
-  type: z170.literal("pcb_thermal_spoke"),
+import { z as z171 } from "zod";
+var pcb_thermal_spoke = z171.object({
+  type: z171.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z170.string(),
-  shape: z170.string(),
-  spoke_count: z170.number(),
+  pcb_ground_plane_id: z171.string(),
+  shape: z171.string(),
+  spoke_count: z171.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z170.string().optional(),
-  subcircuit_id: z170.string().optional()
+  pcb_plated_hole_id: z171.string().optional(),
+  subcircuit_id: z171.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z171 } from "zod";
-var pcb_copper_pour_base = z171.object({
-  type: z171.literal("pcb_copper_pour"),
+import { z as z172 } from "zod";
+var pcb_copper_pour_base = z172.object({
+  type: z172.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z171.string().optional(),
-  subcircuit_id: z171.string().optional(),
+  pcb_group_id: z172.string().optional(),
+  subcircuit_id: z172.string().optional(),
   layer: layer_ref,
-  source_net_id: z171.string().optional(),
-  covered_with_solder_mask: z171.boolean().optional().default(true)
+  source_net_id: z172.string().optional(),
+  covered_with_solder_mask: z172.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z171.literal("rect"),
+  shape: z172.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3664,16 +3693,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z171.literal("brep"),
+  shape: z172.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z171.literal("polygon"),
-  points: z171.array(point)
+  shape: z172.literal("polygon"),
+  points: z172.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z171.discriminatedUnion("shape", [
+var pcb_copper_pour = z172.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -3681,99 +3710,99 @@ var pcb_copper_pour = z171.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z172 } from "zod";
+import { z as z173 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z172.literal("pcb_component_outside_board_error"),
+  type: z173.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z172.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z172.string(),
-  pcb_board_id: z172.string(),
+  error_type: z173.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z173.string(),
+  pcb_board_id: z173.string(),
   component_center: point,
-  component_bounds: z172.object({
-    min_x: z172.number(),
-    max_x: z172.number(),
-    min_y: z172.number(),
-    max_y: z172.number()
+  component_bounds: z173.object({
+    min_x: z173.number(),
+    max_x: z173.number(),
+    min_y: z173.number(),
+    max_y: z173.number()
   }),
-  subcircuit_id: z172.string().optional(),
-  source_component_id: z172.string().optional()
+  subcircuit_id: z173.string().optional(),
+  source_component_id: z173.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z173 } from "zod";
+import { z as z174 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z173.literal("pcb_component_not_on_board_edge_error"),
+  type: z174.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z173.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z173.string(),
-  pcb_board_id: z173.string(),
+  error_type: z174.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z174.string(),
+  pcb_board_id: z174.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z173.number(),
-  source_component_id: z173.string().optional(),
-  subcircuit_id: z173.string().optional()
+  pad_to_nearest_board_edge_distance: z174.number(),
+  source_component_id: z174.string().optional(),
+  subcircuit_id: z174.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z174 } from "zod";
+import { z as z175 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z174.literal("pcb_component_invalid_layer_error"),
+  type: z175.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z174.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z174.string().optional(),
-  source_component_id: z174.string(),
+  error_type: z175.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z175.string().optional(),
+  source_component_id: z175.string(),
   layer: layer_ref,
-  subcircuit_id: z174.string().optional()
+  subcircuit_id: z175.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z175 } from "zod";
+import { z as z176 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z175.literal("pcb_via_clearance_error"),
+  type: z176.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z175.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z175.array(z175.string()).min(2),
+  error_type: z176.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z176.array(z176.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z175.object({
-    x: z175.number().optional(),
-    y: z175.number().optional()
+  pcb_center: z176.object({
+    x: z176.number().optional(),
+    y: z176.number().optional()
   }).optional(),
-  subcircuit_id: z175.string().optional()
+  subcircuit_id: z176.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z176 } from "zod";
+import { z as z177 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z176.literal("pcb_via_trace_clearance_error"),
+  type: z177.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z176.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z176.string(),
-  pcb_trace_id: z176.string(),
+  error_type: z177.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z177.string(),
+  pcb_trace_id: z177.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z176.object({
-    x: z176.number().optional(),
-    y: z176.number().optional()
+  center: z177.object({
+    x: z177.number().optional(),
+    y: z177.number().optional()
   }).optional(),
-  subcircuit_id: z176.string().optional()
+  subcircuit_id: z177.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -3782,41 +3811,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z177 } from "zod";
+import { z as z178 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z177.literal("pcb_pad_pad_clearance_error"),
+  type: z178.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z177.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z177.array(z177.string()).min(2),
+  error_type: z178.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z178.array(z178.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z177.object({
-    x: z177.number().optional(),
-    y: z177.number().optional()
+  center: z178.object({
+    x: z178.number().optional(),
+    y: z178.number().optional()
   }).optional(),
-  subcircuit_id: z177.string().optional()
+  subcircuit_id: z178.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z178 } from "zod";
+import { z as z179 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z178.literal("pcb_pad_trace_clearance_error"),
+  type: z179.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z178.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z178.string(),
-  pcb_trace_id: z178.string(),
+  error_type: z179.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z179.string(),
+  pcb_trace_id: z179.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z178.object({
-    x: z178.number().optional(),
-    y: z178.number().optional()
+  center: z179.object({
+    x: z179.number().optional(),
+    y: z179.number().optional()
   }).optional(),
-  subcircuit_id: z178.string().optional()
+  subcircuit_id: z179.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -3825,89 +3854,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z179 } from "zod";
-var pcb_courtyard_rect = z179.object({
-  type: z179.literal("pcb_courtyard_rect"),
+import { z as z180 } from "zod";
+var pcb_courtyard_rect = z180.object({
+  type: z180.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z179.string(),
-  pcb_group_id: z179.string().optional(),
-  subcircuit_id: z179.string().optional(),
+  pcb_component_id: z180.string(),
+  pcb_group_id: z180.string().optional(),
+  subcircuit_id: z180.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z179.string().optional()
+  color: z180.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z180 } from "zod";
-var pcb_courtyard_outline = z180.object({
-  type: z180.literal("pcb_courtyard_outline"),
+import { z as z181 } from "zod";
+var pcb_courtyard_outline = z181.object({
+  type: z181.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z180.string(),
-  pcb_group_id: z180.string().optional(),
-  subcircuit_id: z180.string().optional(),
+  pcb_component_id: z181.string(),
+  pcb_group_id: z181.string().optional(),
+  subcircuit_id: z181.string().optional(),
   layer: visible_layer,
-  outline: z180.array(point).min(2)
+  outline: z181.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z181 } from "zod";
-var pcb_courtyard_polygon = z181.object({
-  type: z181.literal("pcb_courtyard_polygon"),
+import { z as z182 } from "zod";
+var pcb_courtyard_polygon = z182.object({
+  type: z182.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z181.string(),
-  pcb_group_id: z181.string().optional(),
-  subcircuit_id: z181.string().optional(),
+  pcb_component_id: z182.string(),
+  pcb_group_id: z182.string().optional(),
+  subcircuit_id: z182.string().optional(),
   layer: visible_layer,
-  points: z181.array(point).min(3),
-  color: z181.string().optional()
+  points: z182.array(point).min(3),
+  color: z182.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z182 } from "zod";
-var pcb_courtyard_circle = z182.object({
-  type: z182.literal("pcb_courtyard_circle"),
+import { z as z183 } from "zod";
+var pcb_courtyard_circle = z183.object({
+  type: z183.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z182.string(),
-  pcb_group_id: z182.string().optional(),
-  subcircuit_id: z182.string().optional(),
+  pcb_component_id: z183.string(),
+  pcb_group_id: z183.string().optional(),
+  subcircuit_id: z183.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z182.string().optional()
+  color: z183.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z183 } from "zod";
-var pcb_courtyard_pill = z183.object({
-  type: z183.literal("pcb_courtyard_pill"),
+import { z as z184 } from "zod";
+var pcb_courtyard_pill = z184.object({
+  type: z184.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z183.string(),
-  pcb_group_id: z183.string().optional(),
-  subcircuit_id: z183.string().optional(),
+  pcb_component_id: z184.string(),
+  pcb_group_id: z184.string().optional(),
+  subcircuit_id: z184.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z183.string().optional()
+  color: z184.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z184 } from "zod";
+import { z as z185 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -3938,50 +3967,50 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z184.object({
-  type: z184.literal("cad_component"),
-  cad_component_id: z184.string(),
-  pcb_component_id: z184.string(),
-  source_component_id: z184.string(),
+var cad_component = z185.object({
+  type: z185.literal("cad_component"),
+  cad_component_id: z185.string(),
+  pcb_component_id: z185.string(),
+  source_component_id: z185.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z184.string().optional(),
+  subcircuit_id: z185.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z184.string().optional(),
-  model_obj_url: z184.string().optional(),
-  model_stl_url: z184.string().optional(),
-  model_3mf_url: z184.string().optional(),
-  model_gltf_url: z184.string().optional(),
-  model_glb_url: z184.string().optional(),
-  model_step_url: z184.string().optional(),
-  model_wrl_url: z184.string().optional(),
+  footprinter_string: z185.string().optional(),
+  model_obj_url: z185.string().optional(),
+  model_stl_url: z185.string().optional(),
+  model_3mf_url: z185.string().optional(),
+  model_gltf_url: z185.string().optional(),
+  model_glb_url: z185.string().optional(),
+  model_step_url: z185.string().optional(),
+  model_wrl_url: z185.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z184.number().optional(),
-  model_board_normal_direction: z184.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z185.number().optional(),
+  model_board_normal_direction: z185.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z184.enum([
+  model_origin_alignment: z185.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z184.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z184.any().optional(),
-  show_as_translucent_model: z184.boolean().optional(),
-  show_as_bounding_box: z184.boolean().optional(),
-  show_hidden_edges: z184.boolean().optional(),
-  anchor_alignment: z184.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z185.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z185.any().optional(),
+  show_as_translucent_model: z185.boolean().optional(),
+  show_as_bounding_box: z185.boolean().optional(),
+  show_hidden_edges: z185.boolean().optional(),
+  anchor_alignment: z185.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z185 } from "zod";
-var wave_shape = z185.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z185.union([z185.string(), z185.number()]).transform((val) => {
+import { z as z186 } from "zod";
+var wave_shape = z186.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z186.union([z186.string(), z186.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3990,32 +4019,32 @@ var percentage = z185.union([z185.string(), z185.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z185.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z186.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z185.object({
-  type: z185.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z186.object({
+  type: z186.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z185.literal(true).optional().default(true),
-  positive_source_port_id: z185.string().optional(),
-  negative_source_port_id: z185.string().optional(),
-  positive_source_net_id: z185.string().optional(),
-  negative_source_net_id: z185.string().optional(),
+  is_dc_source: z186.literal(true).optional().default(true),
+  positive_source_port_id: z186.string().optional(),
+  negative_source_port_id: z186.string().optional(),
+  positive_source_net_id: z186.string().optional(),
+  negative_source_net_id: z186.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z185.object({
-  type: z185.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z186.object({
+  type: z186.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z185.literal(false),
-  terminal1_source_port_id: z185.string().optional(),
-  terminal2_source_port_id: z185.string().optional(),
-  terminal1_source_net_id: z185.string().optional(),
-  terminal2_source_net_id: z185.string().optional(),
+  is_dc_source: z186.literal(false),
+  terminal1_source_port_id: z186.string().optional(),
+  terminal2_source_port_id: z186.string().optional(),
+  terminal1_source_net_id: z186.string().optional(),
+  terminal2_source_net_id: z186.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -4030,14 +4059,14 @@ var simulation_ac_voltage_source = z185.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z185.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z186.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z186 } from "zod";
-var percentage2 = z186.union([z186.string(), z186.number()]).transform((val) => {
+import { z as z187 } from "zod";
+var percentage2 = z187.union([z187.string(), z187.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -4046,32 +4075,32 @@ var percentage2 = z186.union([z186.string(), z186.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z186.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z187.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z186.object({
-  type: z186.literal("simulation_current_source"),
+var simulation_dc_current_source = z187.object({
+  type: z187.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z186.literal(true).optional().default(true),
-  positive_source_port_id: z186.string().optional(),
-  negative_source_port_id: z186.string().optional(),
-  positive_source_net_id: z186.string().optional(),
-  negative_source_net_id: z186.string().optional(),
+  is_dc_source: z187.literal(true).optional().default(true),
+  positive_source_port_id: z187.string().optional(),
+  negative_source_port_id: z187.string().optional(),
+  positive_source_net_id: z187.string().optional(),
+  negative_source_net_id: z187.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z186.object({
-  type: z186.literal("simulation_current_source"),
+var simulation_ac_current_source = z187.object({
+  type: z187.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z186.literal(false),
-  terminal1_source_port_id: z186.string().optional(),
-  terminal2_source_port_id: z186.string().optional(),
-  terminal1_source_net_id: z186.string().optional(),
-  terminal2_source_net_id: z186.string().optional(),
+  is_dc_source: z187.literal(false),
+  terminal1_source_port_id: z187.string().optional(),
+  terminal2_source_port_id: z187.string().optional(),
+  terminal1_source_net_id: z187.string().optional(),
+  terminal2_source_net_id: z187.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -4081,58 +4110,58 @@ var simulation_ac_current_source = z186.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z186.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z187.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z188 } from "zod";
+import { z as z189 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z187 } from "zod";
-var simulation_dc_sweep_unit = z187.custom(
+import { z as z188 } from "zod";
+var simulation_dc_sweep_unit = z188.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z187.custom(
+var simulation_parameter_unit = z188.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z188.union([
-  z188.literal("spice_dc_sweep"),
-  z188.literal("spice_dc_operating_point"),
-  z188.literal("spice_transient_analysis"),
-  z188.literal("spice_ac_analysis")
+var experiment_type = z189.union([
+  z189.literal("spice_dc_sweep"),
+  z189.literal("spice_dc_operating_point"),
+  z189.literal("spice_transient_analysis"),
+  z189.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z188.object({
-  method: z188.enum(["trap", "gear"]).optional(),
-  reltol: z188.union([z188.number(), z188.string()]).optional(),
-  abstol: z188.union([z188.number(), z188.string()]).optional(),
-  vntol: z188.union([z188.number(), z188.string()]).optional()
+var spice_simulation_options = z189.object({
+  method: z189.enum(["trap", "gear"]).optional(),
+  reltol: z189.union([z189.number(), z189.string()]).optional(),
+  abstol: z189.union([z189.number(), z189.string()]).optional(),
+  vntol: z189.union([z189.number(), z189.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z188.object({
-  type: z188.literal("simulation_experiment"),
+var simulation_experiment = z189.object({
+  type: z189.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z188.string(),
+  name: z189.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z188.string().optional(),
-  dc_sweep_current_source_id: z188.string().optional(),
-  dc_sweep_start: z188.number().optional(),
-  dc_sweep_stop: z188.number().optional(),
-  dc_sweep_step: z188.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z189.string().optional(),
+  dc_sweep_current_source_id: z189.string().optional(),
+  dc_sweep_start: z189.number().optional(),
+  dc_sweep_stop: z189.number().optional(),
+  dc_sweep_step: z189.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z188.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z188.number().int().positive().optional(),
-  ac_sample_count: z188.number().int().positive().optional(),
-  ac_start_frequency_hz: z188.number().positive().optional(),
-  ac_stop_frequency_hz: z188.number().positive().optional()
+  ac_sweep_type: z189.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z189.number().int().positive().optional(),
+  ac_sample_count: z189.number().int().positive().optional(),
+  ac_start_frequency_hz: z189.number().positive().optional(),
+  ac_stop_frequency_hz: z189.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4144,7 +4173,7 @@ var simulation_experiment = z188.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z188.ZodIssueCode.custom,
+          code: z189.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4154,7 +4183,7 @@ var simulation_experiment = z188.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4163,35 +4192,35 @@ var simulation_experiment = z188.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4201,87 +4230,87 @@ var simulation_experiment = z188.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z190 } from "zod";
+import { z as z191 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z189 } from "zod";
-var simulation_parameter_sweep_coordinate = z189.object({
-  simulation_parameter_sweep_id: z189.string(),
-  sweep_index: z189.number().int().nonnegative(),
-  parameter_value: z189.number(),
+import { z as z190 } from "zod";
+var simulation_parameter_sweep_coordinate = z190.object({
+  simulation_parameter_sweep_id: z190.string(),
+  sweep_index: z190.number().int().nonnegative(),
+  parameter_value: z190.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z190.object({
-  type: z190.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z191.object({
+  type: z191.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z190.string(),
+  simulation_experiment_id: z191.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z190.array(z190.number()).optional(),
-  voltage_levels: z190.array(z190.number()),
-  source_component_id: z190.string().optional(),
-  subcircuit_connectivity_map_key: z190.string().optional(),
+  timestamps_ms: z191.array(z191.number()).optional(),
+  voltage_levels: z191.array(z191.number()),
+  source_component_id: z191.string().optional(),
+  subcircuit_connectivity_map_key: z191.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z190.string().optional(),
-  color: z190.string().optional()
+  name: z191.string().optional(),
+  color: z191.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z191 } from "zod";
-var simulation_transient_current_graph = z191.object({
-  type: z191.literal("simulation_transient_current_graph"),
+import { z as z192 } from "zod";
+var simulation_transient_current_graph = z192.object({
+  type: z192.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z191.string(),
+  simulation_experiment_id: z192.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z191.array(z191.number()).optional(),
-  current_levels: z191.array(z191.number()),
-  source_component_id: z191.string().optional(),
-  subcircuit_connectivity_map_key: z191.string().optional(),
+  timestamps_ms: z192.array(z192.number()).optional(),
+  current_levels: z192.array(z192.number()),
+  source_component_id: z192.string().optional(),
+  subcircuit_connectivity_map_key: z192.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z191.string().optional(),
-  color: z191.string().optional()
+  name: z192.string().optional(),
+  color: z192.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z192 } from "zod";
-var simulation_switch = z192.object({
-  type: z192.literal("simulation_switch"),
+import { z as z193 } from "zod";
+var simulation_switch = z193.object({
+  type: z193.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z192.string().optional(),
+  source_component_id: z193.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z192.boolean().optional(),
+  starts_closed: z193.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z193 } from "zod";
-var simulation_voltage_probe = z193.object({
-  type: z193.literal("simulation_voltage_probe"),
+import { z as z194 } from "zod";
+var simulation_voltage_probe = z194.object({
+  type: z194.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z193.string().optional(),
-  name: z193.string().optional(),
-  signal_input_source_port_id: z193.string().optional(),
-  signal_input_source_net_id: z193.string().optional(),
-  reference_input_source_port_id: z193.string().optional(),
-  reference_input_source_net_id: z193.string().optional(),
-  subcircuit_id: z193.string().optional(),
-  color: z193.string().optional()
+  source_component_id: z194.string().optional(),
+  name: z194.string().optional(),
+  signal_input_source_port_id: z194.string().optional(),
+  signal_input_source_net_id: z194.string().optional(),
+  reference_input_source_port_id: z194.string().optional(),
+  reference_input_source_net_id: z194.string().optional(),
+  subcircuit_id: z194.string().optional(),
+  color: z194.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4291,20 +4320,20 @@ var simulation_voltage_probe = z193.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z193.ZodIssueCode.custom,
+        code: z194.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z193.ZodIssueCode.custom,
+          code: z194.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z193.ZodIssueCode.custom,
+          code: z194.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4312,7 +4341,7 @@ var simulation_voltage_probe = z193.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z193.ZodIssueCode.custom,
+        code: z194.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4321,20 +4350,20 @@ var simulation_voltage_probe = z193.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z194 } from "zod";
-var simulation_current_probe = z194.object({
-  type: z194.literal("simulation_current_probe"),
+import { z as z195 } from "zod";
+var simulation_current_probe = z195.object({
+  type: z195.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z194.string().optional(),
-  name: z194.string().optional(),
-  positive_source_port_id: z194.string().optional(),
-  negative_source_port_id: z194.string().optional(),
-  positive_source_net_id: z194.string().optional(),
-  negative_source_net_id: z194.string().optional(),
-  subcircuit_id: z194.string().optional(),
-  color: z194.string().optional()
+  source_component_id: z195.string().optional(),
+  name: z195.string().optional(),
+  positive_source_port_id: z195.string().optional(),
+  negative_source_port_id: z195.string().optional(),
+  positive_source_net_id: z195.string().optional(),
+  negative_source_net_id: z195.string().optional(),
+  subcircuit_id: z195.string().optional(),
+  color: z195.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -4346,7 +4375,7 @@ var simulation_current_probe = z194.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z194.ZodIssueCode.custom,
+      code: z195.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -4354,7 +4383,7 @@ var simulation_current_probe = z194.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z194.ZodIssueCode.custom,
+        code: z195.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -4363,71 +4392,71 @@ var simulation_current_probe = z194.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z194.ZodIssueCode.custom,
+        code: z195.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z194.ZodIssueCode.custom,
+    code: z195.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z195 } from "zod";
+import { z as z196 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z195.literal("simulation_unknown_experiment_error"),
+  type: z196.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z195.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z195.string().optional(),
-  subcircuit_id: z195.string().optional()
+  error_type: z196.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z196.string().optional(),
+  subcircuit_id: z196.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z196 } from "zod";
-var simulation_parameter_type = z196.enum([
+import { z as z197 } from "zod";
+var simulation_parameter_type = z197.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z196.object({
-  type: z196.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z197.object({
+  type: z197.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z196.string(),
-  name: z196.string().optional(),
-  parameter_values: z196.array(z196.number()).min(1),
+  simulation_experiment_id: z197.string(),
+  name: z197.string().optional(),
+  parameter_values: z197.array(z197.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z196.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z197.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z196.literal("resistance"),
-    resistor_source_component_id: z196.string()
+    parameter_type: z197.literal("resistance"),
+    resistor_source_component_id: z197.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z196.literal("capacitance"),
-    capacitor_source_component_id: z196.string()
+    parameter_type: z197.literal("capacitance"),
+    capacitor_source_component_id: z197.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z196.literal("inductance"),
-    inductor_source_component_id: z196.string()
+    parameter_type: z197.literal("inductance"),
+    inductor_source_component_id: z197.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z196.literal("voltage"),
-    source_net_id: z196.string()
+    parameter_type: z197.literal("voltage"),
+    source_net_id: z197.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z196.literal("current"),
-    current_source_component_id: z196.string()
+    parameter_type: z197.literal("current"),
+    current_source_component_id: z197.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4435,52 +4464,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z197 } from "zod";
-var simulation_dc_operating_point_voltage = z197.object({
-  type: z197.literal("simulation_dc_operating_point_voltage"),
+import { z as z198 } from "zod";
+var simulation_dc_operating_point_voltage = z198.object({
+  type: z198.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z197.string(),
+  simulation_experiment_id: z198.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z197.string(),
-  voltage: z197.number(),
-  name: z197.string().optional(),
-  color: z197.string().optional()
+  simulation_voltage_probe_id: z198.string(),
+  voltage: z198.number(),
+  name: z198.string().optional(),
+  color: z198.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z198 } from "zod";
-var simulation_dc_operating_point_current = z198.object({
-  type: z198.literal("simulation_dc_operating_point_current"),
+import { z as z199 } from "zod";
+var simulation_dc_operating_point_current = z199.object({
+  type: z199.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z198.string(),
+  simulation_experiment_id: z199.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z198.string(),
-  current: z198.number(),
-  name: z198.string().optional(),
-  color: z198.string().optional()
+  simulation_current_probe_id: z199.string(),
+  current: z199.number(),
+  name: z199.string().optional(),
+  color: z199.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z199 } from "zod";
-var simulation_dc_sweep_voltage_graph = z199.object({
-  type: z199.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z200 } from "zod";
+var simulation_dc_sweep_voltage_graph = z200.object({
+  type: z200.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z199.string(),
+  simulation_experiment_id: z200.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z199.string(),
-  sweep_values: z199.array(z199.number()),
+  simulation_voltage_probe_id: z200.string(),
+  sweep_values: z200.array(z200.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z199.array(z199.number()),
-  name: z199.string().optional(),
-  color: z199.string().optional()
+  voltage_levels: z200.array(z200.number()),
+  name: z200.string().optional(),
+  color: z200.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4490,20 +4519,20 @@ var simulation_dc_sweep_voltage_graph = z199.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z200 } from "zod";
-var simulation_dc_sweep_current_graph = z200.object({
-  type: z200.literal("simulation_dc_sweep_current_graph"),
+import { z as z201 } from "zod";
+var simulation_dc_sweep_current_graph = z201.object({
+  type: z201.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z200.string(),
+  simulation_experiment_id: z201.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z200.string(),
-  sweep_values: z200.array(z200.number()),
+  simulation_current_probe_id: z201.string(),
+  sweep_values: z201.array(z201.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z200.array(z200.number()),
-  name: z200.string().optional(),
-  color: z200.string().optional()
+  current_levels: z201.array(z201.number()),
+  name: z201.string().optional(),
+  color: z201.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4513,29 +4542,29 @@ var simulation_dc_sweep_current_graph = z200.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z202 } from "zod";
+import { z as z203 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z201 } from "zod";
-var simulation_complex_sample = z201.object({
-  re: z201.number(),
-  im: z201.number()
+import { z as z202 } from "zod";
+var simulation_complex_sample = z202.object({
+  re: z202.number(),
+  im: z202.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z202.object({
-  type: z202.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z203.object({
+  type: z203.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z202.string(),
+  simulation_experiment_id: z203.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z202.string(),
-  frequencies_hz: z202.array(z202.number()),
-  complex_voltages: z202.array(simulation_complex_sample),
-  name: z202.string().optional(),
-  color: z202.string().optional()
+  simulation_voltage_probe_id: z203.string(),
+  frequencies_hz: z203.array(z203.number()),
+  complex_voltages: z203.array(simulation_complex_sample),
+  name: z203.string().optional(),
+  color: z203.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4545,19 +4574,19 @@ var simulation_ac_sweep_voltage_graph = z202.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z203 } from "zod";
-var simulation_ac_sweep_current_graph = z203.object({
-  type: z203.literal("simulation_ac_sweep_current_graph"),
+import { z as z204 } from "zod";
+var simulation_ac_sweep_current_graph = z204.object({
+  type: z204.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z203.string(),
+  simulation_experiment_id: z204.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z203.string(),
-  frequencies_hz: z203.array(z203.number()),
-  complex_currents: z203.array(simulation_complex_sample),
-  name: z203.string().optional(),
-  color: z203.string().optional()
+  simulation_current_probe_id: z204.string(),
+  frequencies_hz: z204.array(z204.number()),
+  complex_currents: z204.array(simulation_complex_sample),
+  name: z204.string().optional(),
+  color: z204.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4567,52 +4596,52 @@ var simulation_ac_sweep_current_graph = z203.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z204 } from "zod";
-var simulation_op_amp = z204.object({
-  type: z204.literal("simulation_op_amp"),
+import { z as z205 } from "zod";
+var simulation_op_amp = z205.object({
+  type: z205.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z204.string().optional(),
-  inverting_input_source_port_id: z204.string(),
-  non_inverting_input_source_port_id: z204.string(),
-  output_source_port_id: z204.string(),
-  positive_supply_source_port_id: z204.string(),
-  negative_supply_source_port_id: z204.string()
+  source_component_id: z205.string().optional(),
+  inverting_input_source_port_id: z205.string(),
+  non_inverting_input_source_port_id: z205.string(),
+  output_source_port_id: z205.string(),
+  positive_supply_source_port_id: z205.string(),
+  negative_supply_source_port_id: z205.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z205 } from "zod";
-var simulation_spice_subcircuit = z205.object({
-  type: z205.literal("simulation_spice_subcircuit"),
+import { z as z206 } from "zod";
+var simulation_spice_subcircuit = z206.object({
+  type: z206.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z205.string(),
-  spice_pin_to_source_port_map: z205.record(z205.string(), z205.string()),
-  subcircuit_source: z205.string()
+  source_component_id: z206.string(),
+  spice_pin_to_source_port_map: z206.record(z206.string(), z206.string()),
+  subcircuit_source: z206.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z206 } from "zod";
+import { z as z207 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z206.object({
-  type: z206.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z207.object({
+  type: z207.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z206.string().optional(),
-  simulation_transient_current_graph_id: z206.string().optional(),
-  simulation_voltage_probe_id: z206.string().optional(),
-  simulation_current_probe_id: z206.string().optional(),
-  display_name: z206.string().optional(),
-  color: z206.string().optional(),
-  display_center_value: z206.number().optional(),
-  display_center_offset_divs: z206.number().optional(),
-  volts_per_div: z206.number().positive().optional(),
-  amps_per_div: z206.number().positive().optional()
+  simulation_transient_voltage_graph_id: z207.string().optional(),
+  simulation_transient_current_graph_id: z207.string().optional(),
+  simulation_voltage_probe_id: z207.string().optional(),
+  simulation_current_probe_id: z207.string().optional(),
+  display_name: z207.string().optional(),
+  color: z207.string().optional(),
+  display_center_value: z207.number().optional(),
+  display_center_offset_divs: z207.number().optional(),
+  volts_per_div: z207.number().positive().optional(),
+  amps_per_div: z207.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4626,19 +4655,19 @@ var simulation_oscilloscope_trace = z206.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z206.ZodIssueCode.custom,
+      code: z207.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z206.ZodIssueCode.custom,
+      code: z207.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z206.ZodIssueCode.custom,
+      code: z207.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4646,8 +4675,8 @@ var simulation_oscilloscope_trace = z206.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z207 } from "zod";
-var any_circuit_element = z207.union([
+import { z as z208 } from "zod";
+var any_circuit_element = z208.union([
   source_trace,
   source_bus,
   source_port,
@@ -4706,6 +4735,7 @@ var any_circuit_element = z207.union([
   pcb_fabricator_extra_charge_warning,
   pcb_plated_hole,
   pcb_keepout,
+  pcb_keepout_overlap_warning,
   pcb_port,
   pcb_net,
   pcb_text,
@@ -4918,6 +4948,7 @@ export {
   pcb_hole_rotated_pill_shape,
   pcb_keepout,
   pcb_keepout_outline,
+  pcb_keepout_overlap_warning,
   pcb_manual_edit_conflict_warning,
   pcb_missing_footprint_error,
   pcb_net,