circuit-json 0.0.490 → 0.0.491

package/README.md

@@ -1409,6 +1409,8 @@ interface PcbBoard extends ManufacturingDrcProperties {
   subcircuit_id?: string
   is_mounted_to_carrier_board?: boolean
   is_via_in_pad_allowed?: boolean
+  default_via_tented_on_top?: boolean
+  default_via_tented_on_bottom?: boolean
   width?: Length
   height?: Length
   display_offset_x?: string
@@ -2826,6 +2828,20 @@ interface PcbTraceRoutePointWire {
   layer: LayerRef
 }
 
+interface PcbTraceRoutePointVia {
+  route_type: "via"
+  x: Distance
+  y: Distance
+  copper_pour_id?: string
+  is_inside_copper_pour?: boolean
+  hole_diameter?: Distance
+  outer_diameter?: Distance
+  tented_on_top?: boolean
+  tented_on_bottom?: boolean
+  from_layer: LayerRef
+  to_layer: LayerRef
+}
+
 type PcbTraceRoutePoint =
   | PcbTraceRoutePointWire
   | PcbTraceRoutePointVia

package/dist/index.d.mts

@@ -7262,6 +7262,8 @@ declare const pcb_trace_route_point_via: z.ZodObject<{
     is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
     hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    tented_on_top: z.ZodOptional<z.ZodBoolean>;
+    tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
     from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
         name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
     }, "strip", z.ZodTypeAny, {
@@ -7290,6 +7292,8 @@ declare const pcb_trace_route_point_via: z.ZodObject<{
     outer_diameter?: number | undefined;
     copper_pour_id?: string | undefined;
     is_inside_copper_pour?: boolean | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
 }, {
     x: string | number;
     y: string | number;
@@ -7304,6 +7308,8 @@ declare const pcb_trace_route_point_via: z.ZodObject<{
     outer_diameter?: string | number | undefined;
     copper_pour_id?: string | undefined;
     is_inside_copper_pour?: boolean | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
 }>;
 declare const pcb_trace_route_point_through_pad: z.ZodObject<{
     route_type: z.ZodLiteral<"through_pad">;
@@ -7431,6 +7437,8 @@ declare const pcb_trace_route_point: z.ZodUnion<[z.ZodObject<{
     is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
     hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+    tented_on_top: z.ZodOptional<z.ZodBoolean>;
+    tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
     from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
         name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
     }, "strip", z.ZodTypeAny, {
@@ -7459,6 +7467,8 @@ declare const pcb_trace_route_point: z.ZodUnion<[z.ZodObject<{
     outer_diameter?: number | undefined;
     copper_pour_id?: string | undefined;
     is_inside_copper_pour?: boolean | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
 }, {
     x: string | number;
     y: string | number;
@@ -7473,6 +7483,8 @@ declare const pcb_trace_route_point: z.ZodUnion<[z.ZodObject<{
     outer_diameter?: string | number | undefined;
     copper_pour_id?: string | undefined;
     is_inside_copper_pour?: boolean | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
 }>, z.ZodObject<{
     route_type: z.ZodLiteral<"through_pad">;
     start: z.ZodObject<{
@@ -7611,6 +7623,8 @@ declare const pcb_trace: z.ZodObject<{
         is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
         hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
         outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+        tented_on_top: z.ZodOptional<z.ZodBoolean>;
+        tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
         from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
             name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
         }, "strip", z.ZodTypeAny, {
@@ -7639,6 +7653,8 @@ declare const pcb_trace: z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }, {
         x: string | number;
         y: string | number;
@@ -7653,6 +7669,8 @@ declare const pcb_trace: z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }>, z.ZodObject<{
         route_type: z.ZodLiteral<"through_pad">;
         start: z.ZodObject<{
@@ -7754,6 +7772,8 @@ declare const pcb_trace: z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: number;
         start: {
@@ -7807,6 +7827,8 @@ declare const pcb_trace: z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: string | number;
         start: {
@@ -7858,6 +7880,8 @@ interface PcbTraceRoutePointVia {
     is_inside_copper_pour?: boolean;
     hole_diameter?: Distance;
     outer_diameter?: Distance;
+    tented_on_top?: boolean;
+    tented_on_bottom?: boolean;
     from_layer: LayerRef;
     to_layer: LayerRef;
 }
@@ -8400,6 +8424,8 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -8408,8 +8434,6 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -8424,6 +8448,8 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -8435,8 +8461,6 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>, {
     type: "pcb_via";
     x: number;
@@ -8448,6 +8472,8 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -8455,8 +8481,6 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     subcircuit_connectivity_map_key?: string | undefined;
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -8471,6 +8495,8 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -8482,8 +8508,6 @@ declare const pcb_via: z.ZodEffects<z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>;
 type PcbViaInput = z.input<typeof pcb_via>;
 /**
@@ -8526,6 +8550,8 @@ declare const pcb_board: z.ZodObject<{
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
     is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_top: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -8619,6 +8645,8 @@ declare const pcb_board: z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {
         x: number;
@@ -8662,6 +8690,8 @@ declare const pcb_board: z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     num_layers?: number | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {
@@ -8684,6 +8714,8 @@ interface PcbBoard extends ManufacturingDrcProperties {
     subcircuit_id?: string;
     is_mounted_to_carrier_board?: boolean;
     is_via_in_pad_allowed?: boolean;
+    default_via_tented_on_top?: boolean;
+    default_via_tented_on_bottom?: boolean;
     width?: Length;
     height?: Length;
     display_offset_x?: string;
@@ -43103,6 +43135,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
         is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
         hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
         outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+        tented_on_top: z.ZodOptional<z.ZodBoolean>;
+        tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
         from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
             name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
         }, "strip", z.ZodTypeAny, {
@@ -43131,6 +43165,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }, {
         x: string | number;
         y: string | number;
@@ -43145,6 +43181,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }>, z.ZodObject<{
         route_type: z.ZodLiteral<"through_pad">;
         start: z.ZodObject<{
@@ -43246,6 +43284,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: number;
         start: {
@@ -43299,6 +43339,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: string | number;
         start: {
@@ -43499,6 +43541,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -43507,8 +43551,6 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -43523,6 +43565,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -43534,8 +43578,6 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>, {
     type: "pcb_via";
     x: number;
@@ -43547,6 +43589,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -43554,8 +43598,6 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     subcircuit_connectivity_map_key?: string | undefined;
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -43570,6 +43612,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -43581,8 +43625,6 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>, z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"circle">;
@@ -44312,6 +44354,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
     is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_top: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -44405,6 +44449,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {
         x: number;
@@ -44448,6 +44494,8 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     num_layers?: number | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {
@@ -63712,6 +63760,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
         is_inside_copper_pour: z.ZodOptional<z.ZodBoolean>;
         hole_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
         outer_diameter: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
+        tented_on_top: z.ZodOptional<z.ZodBoolean>;
+        tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
         from_layer: z.ZodEffects<z.ZodUnion<[z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>, z.ZodObject<{
             name: z.ZodEnum<["top", "bottom", "inner1", "inner2", "inner3", "inner4", "inner5", "inner6", "inner7", "inner8"]>;
         }, "strip", z.ZodTypeAny, {
@@ -63740,6 +63790,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }, {
         x: string | number;
         y: string | number;
@@ -63754,6 +63806,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     }>, z.ZodObject<{
         route_type: z.ZodLiteral<"through_pad">;
         start: z.ZodObject<{
@@ -63855,6 +63909,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: number;
         start: {
@@ -63908,6 +63964,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
         outer_diameter?: string | number | undefined;
         copper_pour_id?: string | undefined;
         is_inside_copper_pour?: boolean | undefined;
+        tented_on_top?: boolean | undefined;
+        tented_on_bottom?: boolean | undefined;
     } | {
         width: string | number;
         start: {
@@ -64108,6 +64166,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -64116,8 +64176,6 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -64132,6 +64190,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -64143,8 +64203,6 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>, {
     type: "pcb_via";
     x: number;
@@ -64156,6 +64214,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     to_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     subcircuit_id?: string | undefined;
     pcb_group_id?: string | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | undefined;
     source_trace_id?: string | undefined;
     pcb_trace_id?: string | undefined;
@@ -64163,8 +64223,6 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     subcircuit_connectivity_map_key?: string | undefined;
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }, {
     type: "pcb_via";
     x: string | number;
@@ -64179,6 +64237,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_group_id?: string | undefined;
     hole_diameter?: string | number | undefined;
     outer_diameter?: string | number | undefined;
+    tented_on_top?: boolean | undefined;
+    tented_on_bottom?: boolean | undefined;
     from_layer?: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
         name: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
     } | undefined;
@@ -64190,8 +64250,6 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     net_is_assignable?: boolean | undefined;
     net_assigned?: boolean | undefined;
     is_tented?: boolean | undefined;
-    tented_on_top?: boolean | undefined;
-    tented_on_bottom?: boolean | undefined;
 }>, z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"circle">;
@@ -64921,6 +64979,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
     is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_top: z.ZodOptional<z.ZodBoolean>;
+    default_via_tented_on_bottom: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -65014,6 +65074,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {
         x: number;
@@ -65057,6 +65119,8 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
     is_via_in_pad_allowed?: boolean | undefined;
+    default_via_tented_on_top?: boolean | undefined;
+    default_via_tented_on_bottom?: boolean | undefined;
     num_layers?: number | undefined;
     allow_blind_and_buried_vias?: boolean | undefined;
     outline?: {

package/dist/index.mjs

@@ -2520,6 +2520,8 @@ var pcb_trace_route_point_via = z115.object({
   is_inside_copper_pour: z115.boolean().optional(),
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
+  tented_on_top: z115.boolean().optional(),
+  tented_on_bottom: z115.boolean().optional(),
   from_layer: layer_ref,
   to_layer: layer_ref
 });
@@ -2727,6 +2729,8 @@ var pcb_board = z125.object({
   subcircuit_id: z125.string().optional(),
   is_mounted_to_carrier_board: z125.boolean().optional(),
   is_via_in_pad_allowed: z125.boolean().optional(),
+  default_via_tented_on_top: z125.boolean().optional(),
+  default_via_tented_on_bottom: z125.boolean().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,