circuit-json 0.0.488 → 0.0.489

package/dist/index.mjs

@@ -3491,16 +3491,34 @@ var supplier_footprint_mismatch_warning = z161.object({
 );
 expectTypesMatch(true);
 
-// src/pcb/pcb_breakout_point.ts
+// src/pcb/pcb_fabricator_extra_charge_warning.ts
 import { z as z162 } from "zod";
-var pcb_breakout_point = z162.object({
-  type: z162.literal("pcb_breakout_point"),
+var pcb_fabricator_extra_charge_warning = z162.object({
+  type: z162.literal("pcb_fabricator_extra_charge_warning"),
+  pcb_fabricator_extra_charge_warning_id: getZodPrefixedIdWithDefault(
+    "pcb_fabricator_extra_charge_warning"
+  ),
+  warning_type: z162.literal("pcb_fabricator_extra_charge_warning").default("pcb_fabricator_extra_charge_warning"),
+  message: z162.string(),
+  fabricator_preset: z162.string(),
+  pcb_board_id: z162.string().optional(),
+  pcb_via_ids: z162.array(z162.string()).optional(),
+  subcircuit_id: z162.string().optional()
+}).describe(
+  "Warning that a design feature incurs an extra charge for the selected fabricator preset, such as via hole diameters below 0.3 mm with JLCPCB economy or standard presets."
+);
+expectTypesMatch(true);
+
+// src/pcb/pcb_breakout_point.ts
+import { z as z163 } from "zod";
+var pcb_breakout_point = z163.object({
+  type: z163.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z162.string(),
-  subcircuit_id: z162.string().optional(),
-  source_trace_id: z162.string().optional(),
-  source_port_id: z162.string().optional(),
-  source_net_id: z162.string().optional(),
+  pcb_group_id: z163.string(),
+  subcircuit_id: z163.string().optional(),
+  source_trace_id: z163.string().optional(),
+  source_port_id: z163.string().optional(),
+  source_net_id: z163.string().optional(),
   layer: layer_ref.optional(),
   x: distance,
   y: distance
@@ -3510,61 +3528,61 @@ var pcb_breakout_point = z162.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z163 } from "zod";
-var pcb_ground_plane = z163.object({
-  type: z163.literal("pcb_ground_plane"),
+import { z as z164 } from "zod";
+var pcb_ground_plane = z164.object({
+  type: z164.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z163.string(),
-  source_net_id: z163.string(),
-  pcb_group_id: z163.string().optional(),
-  subcircuit_id: z163.string().optional()
+  source_pcb_ground_plane_id: z164.string(),
+  source_net_id: z164.string(),
+  pcb_group_id: z164.string().optional(),
+  subcircuit_id: z164.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z164 } from "zod";
-var pcb_ground_plane_region = z164.object({
-  type: z164.literal("pcb_ground_plane_region"),
+import { z as z165 } from "zod";
+var pcb_ground_plane_region = z165.object({
+  type: z165.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z164.string(),
-  pcb_group_id: z164.string().optional(),
-  subcircuit_id: z164.string().optional(),
+  pcb_ground_plane_id: z165.string(),
+  pcb_group_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional(),
   layer: layer_ref,
-  points: z164.array(point)
+  points: z165.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z165 } from "zod";
-var pcb_thermal_spoke = z165.object({
-  type: z165.literal("pcb_thermal_spoke"),
+import { z as z166 } from "zod";
+var pcb_thermal_spoke = z166.object({
+  type: z166.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z165.string(),
-  shape: z165.string(),
-  spoke_count: z165.number(),
+  pcb_ground_plane_id: z166.string(),
+  shape: z166.string(),
+  spoke_count: z166.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional()
+  pcb_plated_hole_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z166 } from "zod";
-var pcb_copper_pour_base = z166.object({
-  type: z166.literal("pcb_copper_pour"),
+import { z as z167 } from "zod";
+var pcb_copper_pour_base = z167.object({
+  type: z167.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z166.string().optional(),
-  subcircuit_id: z166.string().optional(),
+  pcb_group_id: z167.string().optional(),
+  subcircuit_id: z167.string().optional(),
   layer: layer_ref,
-  source_net_id: z166.string().optional(),
-  covered_with_solder_mask: z166.boolean().optional().default(true)
+  source_net_id: z167.string().optional(),
+  covered_with_solder_mask: z167.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z166.literal("rect"),
+  shape: z167.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3572,16 +3590,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z166.literal("brep"),
+  shape: z167.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z166.literal("polygon"),
-  points: z166.array(point)
+  shape: z167.literal("polygon"),
+  points: z167.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z166.discriminatedUnion("shape", [
+var pcb_copper_pour = z167.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -3589,99 +3607,99 @@ var pcb_copper_pour = z166.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z167 } from "zod";
+import { z as z168 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z167.literal("pcb_component_outside_board_error"),
+  type: z168.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z167.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z167.string(),
-  pcb_board_id: z167.string(),
+  error_type: z168.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z168.string(),
+  pcb_board_id: z168.string(),
   component_center: point,
-  component_bounds: z167.object({
-    min_x: z167.number(),
-    max_x: z167.number(),
-    min_y: z167.number(),
-    max_y: z167.number()
+  component_bounds: z168.object({
+    min_x: z168.number(),
+    max_x: z168.number(),
+    min_y: z168.number(),
+    max_y: z168.number()
   }),
-  subcircuit_id: z167.string().optional(),
-  source_component_id: z167.string().optional()
+  subcircuit_id: z168.string().optional(),
+  source_component_id: z168.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z168 } from "zod";
+import { z as z169 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z168.literal("pcb_component_not_on_board_edge_error"),
+  type: z169.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z168.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z168.string(),
-  pcb_board_id: z168.string(),
+  error_type: z169.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z169.string(),
+  pcb_board_id: z169.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z168.number(),
-  source_component_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional()
+  pad_to_nearest_board_edge_distance: z169.number(),
+  source_component_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z169 } from "zod";
+import { z as z170 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z169.literal("pcb_component_invalid_layer_error"),
+  type: z170.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z169.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z169.string().optional(),
-  source_component_id: z169.string(),
+  error_type: z170.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z170.string().optional(),
+  source_component_id: z170.string(),
   layer: layer_ref,
-  subcircuit_id: z169.string().optional()
+  subcircuit_id: z170.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z170 } from "zod";
+import { z as z171 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z170.literal("pcb_via_clearance_error"),
+  type: z171.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z170.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z170.array(z170.string()).min(2),
+  error_type: z171.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z171.array(z171.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z170.object({
-    x: z170.number().optional(),
-    y: z170.number().optional()
+  pcb_center: z171.object({
+    x: z171.number().optional(),
+    y: z171.number().optional()
   }).optional(),
-  subcircuit_id: z170.string().optional()
+  subcircuit_id: z171.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z171 } from "zod";
+import { z as z172 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z171.literal("pcb_via_trace_clearance_error"),
+  type: z172.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z171.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z171.string(),
-  pcb_trace_id: z171.string(),
+  error_type: z172.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z172.string(),
+  pcb_trace_id: z172.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z171.object({
-    x: z171.number().optional(),
-    y: z171.number().optional()
+  center: z172.object({
+    x: z172.number().optional(),
+    y: z172.number().optional()
   }).optional(),
-  subcircuit_id: z171.string().optional()
+  subcircuit_id: z172.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -3690,41 +3708,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z172 } from "zod";
+import { z as z173 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z172.literal("pcb_pad_pad_clearance_error"),
+  type: z173.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z172.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z172.array(z172.string()).min(2),
+  error_type: z173.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z173.array(z173.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z172.object({
-    x: z172.number().optional(),
-    y: z172.number().optional()
+  center: z173.object({
+    x: z173.number().optional(),
+    y: z173.number().optional()
   }).optional(),
-  subcircuit_id: z172.string().optional()
+  subcircuit_id: z173.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z173 } from "zod";
+import { z as z174 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z173.literal("pcb_pad_trace_clearance_error"),
+  type: z174.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z173.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z173.string(),
-  pcb_trace_id: z173.string(),
+  error_type: z174.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z174.string(),
+  pcb_trace_id: z174.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z173.object({
-    x: z173.number().optional(),
-    y: z173.number().optional()
+  center: z174.object({
+    x: z174.number().optional(),
+    y: z174.number().optional()
   }).optional(),
-  subcircuit_id: z173.string().optional()
+  subcircuit_id: z174.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -3733,89 +3751,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z174 } from "zod";
-var pcb_courtyard_rect = z174.object({
-  type: z174.literal("pcb_courtyard_rect"),
+import { z as z175 } from "zod";
+var pcb_courtyard_rect = z175.object({
+  type: z175.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z174.string(),
-  pcb_group_id: z174.string().optional(),
-  subcircuit_id: z174.string().optional(),
+  pcb_component_id: z175.string(),
+  pcb_group_id: z175.string().optional(),
+  subcircuit_id: z175.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z174.string().optional()
+  color: z175.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z175 } from "zod";
-var pcb_courtyard_outline = z175.object({
-  type: z175.literal("pcb_courtyard_outline"),
+import { z as z176 } from "zod";
+var pcb_courtyard_outline = z176.object({
+  type: z176.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z175.string(),
-  pcb_group_id: z175.string().optional(),
-  subcircuit_id: z175.string().optional(),
+  pcb_component_id: z176.string(),
+  pcb_group_id: z176.string().optional(),
+  subcircuit_id: z176.string().optional(),
   layer: visible_layer,
-  outline: z175.array(point).min(2)
+  outline: z176.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z176 } from "zod";
-var pcb_courtyard_polygon = z176.object({
-  type: z176.literal("pcb_courtyard_polygon"),
+import { z as z177 } from "zod";
+var pcb_courtyard_polygon = z177.object({
+  type: z177.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z176.string(),
-  pcb_group_id: z176.string().optional(),
-  subcircuit_id: z176.string().optional(),
+  pcb_component_id: z177.string(),
+  pcb_group_id: z177.string().optional(),
+  subcircuit_id: z177.string().optional(),
   layer: visible_layer,
-  points: z176.array(point).min(3),
-  color: z176.string().optional()
+  points: z177.array(point).min(3),
+  color: z177.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z177 } from "zod";
-var pcb_courtyard_circle = z177.object({
-  type: z177.literal("pcb_courtyard_circle"),
+import { z as z178 } from "zod";
+var pcb_courtyard_circle = z178.object({
+  type: z178.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z177.string(),
-  pcb_group_id: z177.string().optional(),
-  subcircuit_id: z177.string().optional(),
+  pcb_component_id: z178.string(),
+  pcb_group_id: z178.string().optional(),
+  subcircuit_id: z178.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z177.string().optional()
+  color: z178.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z178 } from "zod";
-var pcb_courtyard_pill = z178.object({
-  type: z178.literal("pcb_courtyard_pill"),
+import { z as z179 } from "zod";
+var pcb_courtyard_pill = z179.object({
+  type: z179.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z178.string(),
-  pcb_group_id: z178.string().optional(),
-  subcircuit_id: z178.string().optional(),
+  pcb_component_id: z179.string(),
+  pcb_group_id: z179.string().optional(),
+  subcircuit_id: z179.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z178.string().optional()
+  color: z179.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z179 } from "zod";
+import { z as z180 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -3846,50 +3864,50 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z179.object({
-  type: z179.literal("cad_component"),
-  cad_component_id: z179.string(),
-  pcb_component_id: z179.string(),
-  source_component_id: z179.string(),
+var cad_component = z180.object({
+  type: z180.literal("cad_component"),
+  cad_component_id: z180.string(),
+  pcb_component_id: z180.string(),
+  source_component_id: z180.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z179.string().optional(),
+  subcircuit_id: z180.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z179.string().optional(),
-  model_obj_url: z179.string().optional(),
-  model_stl_url: z179.string().optional(),
-  model_3mf_url: z179.string().optional(),
-  model_gltf_url: z179.string().optional(),
-  model_glb_url: z179.string().optional(),
-  model_step_url: z179.string().optional(),
-  model_wrl_url: z179.string().optional(),
+  footprinter_string: z180.string().optional(),
+  model_obj_url: z180.string().optional(),
+  model_stl_url: z180.string().optional(),
+  model_3mf_url: z180.string().optional(),
+  model_gltf_url: z180.string().optional(),
+  model_glb_url: z180.string().optional(),
+  model_step_url: z180.string().optional(),
+  model_wrl_url: z180.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z179.number().optional(),
-  model_board_normal_direction: z179.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z180.number().optional(),
+  model_board_normal_direction: z180.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z179.enum([
+  model_origin_alignment: z180.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z179.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z179.any().optional(),
-  show_as_translucent_model: z179.boolean().optional(),
-  show_as_bounding_box: z179.boolean().optional(),
-  show_hidden_edges: z179.boolean().optional(),
-  anchor_alignment: z179.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z180.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z180.any().optional(),
+  show_as_translucent_model: z180.boolean().optional(),
+  show_as_bounding_box: z180.boolean().optional(),
+  show_hidden_edges: z180.boolean().optional(),
+  anchor_alignment: z180.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z180 } from "zod";
-var wave_shape = z180.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z180.union([z180.string(), z180.number()]).transform((val) => {
+import { z as z181 } from "zod";
+var wave_shape = z181.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z181.union([z181.string(), z181.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3898,32 +3916,32 @@ var percentage = z180.union([z180.string(), z180.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z180.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z181.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z180.object({
-  type: z180.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z181.object({
+  type: z181.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z180.literal(true).optional().default(true),
-  positive_source_port_id: z180.string().optional(),
-  negative_source_port_id: z180.string().optional(),
-  positive_source_net_id: z180.string().optional(),
-  negative_source_net_id: z180.string().optional(),
+  is_dc_source: z181.literal(true).optional().default(true),
+  positive_source_port_id: z181.string().optional(),
+  negative_source_port_id: z181.string().optional(),
+  positive_source_net_id: z181.string().optional(),
+  negative_source_net_id: z181.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z180.object({
-  type: z180.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z181.object({
+  type: z181.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z180.literal(false),
-  terminal1_source_port_id: z180.string().optional(),
-  terminal2_source_port_id: z180.string().optional(),
-  terminal1_source_net_id: z180.string().optional(),
-  terminal2_source_net_id: z180.string().optional(),
+  is_dc_source: z181.literal(false),
+  terminal1_source_port_id: z181.string().optional(),
+  terminal2_source_port_id: z181.string().optional(),
+  terminal1_source_net_id: z181.string().optional(),
+  terminal2_source_net_id: z181.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -3938,14 +3956,14 @@ var simulation_ac_voltage_source = z180.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z180.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z181.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z181 } from "zod";
-var percentage2 = z181.union([z181.string(), z181.number()]).transform((val) => {
+import { z as z182 } from "zod";
+var percentage2 = z182.union([z182.string(), z182.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3954,32 +3972,32 @@ var percentage2 = z181.union([z181.string(), z181.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z181.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z182.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z181.object({
-  type: z181.literal("simulation_current_source"),
+var simulation_dc_current_source = z182.object({
+  type: z182.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z181.literal(true).optional().default(true),
-  positive_source_port_id: z181.string().optional(),
-  negative_source_port_id: z181.string().optional(),
-  positive_source_net_id: z181.string().optional(),
-  negative_source_net_id: z181.string().optional(),
+  is_dc_source: z182.literal(true).optional().default(true),
+  positive_source_port_id: z182.string().optional(),
+  negative_source_port_id: z182.string().optional(),
+  positive_source_net_id: z182.string().optional(),
+  negative_source_net_id: z182.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z181.object({
-  type: z181.literal("simulation_current_source"),
+var simulation_ac_current_source = z182.object({
+  type: z182.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z181.literal(false),
-  terminal1_source_port_id: z181.string().optional(),
-  terminal2_source_port_id: z181.string().optional(),
-  terminal1_source_net_id: z181.string().optional(),
-  terminal2_source_net_id: z181.string().optional(),
+  is_dc_source: z182.literal(false),
+  terminal1_source_port_id: z182.string().optional(),
+  terminal2_source_port_id: z182.string().optional(),
+  terminal1_source_net_id: z182.string().optional(),
+  terminal2_source_net_id: z182.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -3989,58 +4007,58 @@ var simulation_ac_current_source = z181.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z181.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z182.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z183 } from "zod";
+import { z as z184 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z182 } from "zod";
-var simulation_dc_sweep_unit = z182.custom(
+import { z as z183 } from "zod";
+var simulation_dc_sweep_unit = z183.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z182.custom(
+var simulation_parameter_unit = z183.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z183.union([
-  z183.literal("spice_dc_sweep"),
-  z183.literal("spice_dc_operating_point"),
-  z183.literal("spice_transient_analysis"),
-  z183.literal("spice_ac_analysis")
+var experiment_type = z184.union([
+  z184.literal("spice_dc_sweep"),
+  z184.literal("spice_dc_operating_point"),
+  z184.literal("spice_transient_analysis"),
+  z184.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z183.object({
-  method: z183.enum(["trap", "gear"]).optional(),
-  reltol: z183.union([z183.number(), z183.string()]).optional(),
-  abstol: z183.union([z183.number(), z183.string()]).optional(),
-  vntol: z183.union([z183.number(), z183.string()]).optional()
+var spice_simulation_options = z184.object({
+  method: z184.enum(["trap", "gear"]).optional(),
+  reltol: z184.union([z184.number(), z184.string()]).optional(),
+  abstol: z184.union([z184.number(), z184.string()]).optional(),
+  vntol: z184.union([z184.number(), z184.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z183.object({
-  type: z183.literal("simulation_experiment"),
+var simulation_experiment = z184.object({
+  type: z184.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z183.string(),
+  name: z184.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z183.string().optional(),
-  dc_sweep_current_source_id: z183.string().optional(),
-  dc_sweep_start: z183.number().optional(),
-  dc_sweep_stop: z183.number().optional(),
-  dc_sweep_step: z183.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z184.string().optional(),
+  dc_sweep_current_source_id: z184.string().optional(),
+  dc_sweep_start: z184.number().optional(),
+  dc_sweep_stop: z184.number().optional(),
+  dc_sweep_step: z184.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z183.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z183.number().int().positive().optional(),
-  ac_sample_count: z183.number().int().positive().optional(),
-  ac_start_frequency_hz: z183.number().positive().optional(),
-  ac_stop_frequency_hz: z183.number().positive().optional()
+  ac_sweep_type: z184.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z184.number().int().positive().optional(),
+  ac_sample_count: z184.number().int().positive().optional(),
+  ac_start_frequency_hz: z184.number().positive().optional(),
+  ac_stop_frequency_hz: z184.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -4052,7 +4070,7 @@ var simulation_experiment = z183.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z183.ZodIssueCode.custom,
+          code: z184.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -4062,7 +4080,7 @@ var simulation_experiment = z183.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -4071,35 +4089,35 @@ var simulation_experiment = z183.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z183.ZodIssueCode.custom,
+        code: z184.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -4109,87 +4127,87 @@ var simulation_experiment = z183.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z185 } from "zod";
+import { z as z186 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z184 } from "zod";
-var simulation_parameter_sweep_coordinate = z184.object({
-  simulation_parameter_sweep_id: z184.string(),
-  sweep_index: z184.number().int().nonnegative(),
-  parameter_value: z184.number(),
+import { z as z185 } from "zod";
+var simulation_parameter_sweep_coordinate = z185.object({
+  simulation_parameter_sweep_id: z185.string(),
+  sweep_index: z185.number().int().nonnegative(),
+  parameter_value: z185.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z185.object({
-  type: z185.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z186.object({
+  type: z186.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z185.string(),
+  simulation_experiment_id: z186.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z185.array(z185.number()).optional(),
-  voltage_levels: z185.array(z185.number()),
-  source_component_id: z185.string().optional(),
-  subcircuit_connectivity_map_key: z185.string().optional(),
+  timestamps_ms: z186.array(z186.number()).optional(),
+  voltage_levels: z186.array(z186.number()),
+  source_component_id: z186.string().optional(),
+  subcircuit_connectivity_map_key: z186.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z185.string().optional(),
-  color: z185.string().optional()
+  name: z186.string().optional(),
+  color: z186.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z186 } from "zod";
-var simulation_transient_current_graph = z186.object({
-  type: z186.literal("simulation_transient_current_graph"),
+import { z as z187 } from "zod";
+var simulation_transient_current_graph = z187.object({
+  type: z187.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z186.string(),
+  simulation_experiment_id: z187.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z186.array(z186.number()).optional(),
-  current_levels: z186.array(z186.number()),
-  source_component_id: z186.string().optional(),
-  subcircuit_connectivity_map_key: z186.string().optional(),
+  timestamps_ms: z187.array(z187.number()).optional(),
+  current_levels: z187.array(z187.number()),
+  source_component_id: z187.string().optional(),
+  subcircuit_connectivity_map_key: z187.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z186.string().optional(),
-  color: z186.string().optional()
+  name: z187.string().optional(),
+  color: z187.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z187 } from "zod";
-var simulation_switch = z187.object({
-  type: z187.literal("simulation_switch"),
+import { z as z188 } from "zod";
+var simulation_switch = z188.object({
+  type: z188.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z187.string().optional(),
+  source_component_id: z188.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z187.boolean().optional(),
+  starts_closed: z188.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z188 } from "zod";
-var simulation_voltage_probe = z188.object({
-  type: z188.literal("simulation_voltage_probe"),
+import { z as z189 } from "zod";
+var simulation_voltage_probe = z189.object({
+  type: z189.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z188.string().optional(),
-  name: z188.string().optional(),
-  signal_input_source_port_id: z188.string().optional(),
-  signal_input_source_net_id: z188.string().optional(),
-  reference_input_source_port_id: z188.string().optional(),
-  reference_input_source_net_id: z188.string().optional(),
-  subcircuit_id: z188.string().optional(),
-  color: z188.string().optional()
+  source_component_id: z189.string().optional(),
+  name: z189.string().optional(),
+  signal_input_source_port_id: z189.string().optional(),
+  signal_input_source_net_id: z189.string().optional(),
+  reference_input_source_port_id: z189.string().optional(),
+  reference_input_source_net_id: z189.string().optional(),
+  subcircuit_id: z189.string().optional(),
+  color: z189.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -4199,20 +4217,20 @@ var simulation_voltage_probe = z188.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z188.ZodIssueCode.custom,
+          code: z189.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z188.ZodIssueCode.custom,
+          code: z189.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -4220,7 +4238,7 @@ var simulation_voltage_probe = z188.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z188.ZodIssueCode.custom,
+        code: z189.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -4229,20 +4247,20 @@ var simulation_voltage_probe = z188.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z189 } from "zod";
-var simulation_current_probe = z189.object({
-  type: z189.literal("simulation_current_probe"),
+import { z as z190 } from "zod";
+var simulation_current_probe = z190.object({
+  type: z190.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z189.string().optional(),
-  name: z189.string().optional(),
-  positive_source_port_id: z189.string().optional(),
-  negative_source_port_id: z189.string().optional(),
-  positive_source_net_id: z189.string().optional(),
-  negative_source_net_id: z189.string().optional(),
-  subcircuit_id: z189.string().optional(),
-  color: z189.string().optional()
+  source_component_id: z190.string().optional(),
+  name: z190.string().optional(),
+  positive_source_port_id: z190.string().optional(),
+  negative_source_port_id: z190.string().optional(),
+  positive_source_net_id: z190.string().optional(),
+  negative_source_net_id: z190.string().optional(),
+  subcircuit_id: z190.string().optional(),
+  color: z190.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -4254,7 +4272,7 @@ var simulation_current_probe = z189.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z189.ZodIssueCode.custom,
+      code: z190.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -4262,7 +4280,7 @@ var simulation_current_probe = z189.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z189.ZodIssueCode.custom,
+        code: z190.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -4271,71 +4289,71 @@ var simulation_current_probe = z189.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z189.ZodIssueCode.custom,
+        code: z190.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z189.ZodIssueCode.custom,
+    code: z190.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z190 } from "zod";
+import { z as z191 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z190.literal("simulation_unknown_experiment_error"),
+  type: z191.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z190.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z190.string().optional(),
-  subcircuit_id: z190.string().optional()
+  error_type: z191.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z191.string().optional(),
+  subcircuit_id: z191.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z191 } from "zod";
-var simulation_parameter_type = z191.enum([
+import { z as z192 } from "zod";
+var simulation_parameter_type = z192.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z191.object({
-  type: z191.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z192.object({
+  type: z192.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z191.string(),
-  name: z191.string().optional(),
-  parameter_values: z191.array(z191.number()).min(1),
+  simulation_experiment_id: z192.string(),
+  name: z192.string().optional(),
+  parameter_values: z192.array(z192.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z191.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z192.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z191.literal("resistance"),
-    resistor_source_component_id: z191.string()
+    parameter_type: z192.literal("resistance"),
+    resistor_source_component_id: z192.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z191.literal("capacitance"),
-    capacitor_source_component_id: z191.string()
+    parameter_type: z192.literal("capacitance"),
+    capacitor_source_component_id: z192.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z191.literal("inductance"),
-    inductor_source_component_id: z191.string()
+    parameter_type: z192.literal("inductance"),
+    inductor_source_component_id: z192.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z191.literal("voltage"),
-    source_net_id: z191.string()
+    parameter_type: z192.literal("voltage"),
+    source_net_id: z192.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z191.literal("current"),
-    current_source_component_id: z191.string()
+    parameter_type: z192.literal("current"),
+    current_source_component_id: z192.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4343,52 +4361,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z192 } from "zod";
-var simulation_dc_operating_point_voltage = z192.object({
-  type: z192.literal("simulation_dc_operating_point_voltage"),
+import { z as z193 } from "zod";
+var simulation_dc_operating_point_voltage = z193.object({
+  type: z193.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z192.string(),
+  simulation_experiment_id: z193.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z192.string(),
-  voltage: z192.number(),
-  name: z192.string().optional(),
-  color: z192.string().optional()
+  simulation_voltage_probe_id: z193.string(),
+  voltage: z193.number(),
+  name: z193.string().optional(),
+  color: z193.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z193 } from "zod";
-var simulation_dc_operating_point_current = z193.object({
-  type: z193.literal("simulation_dc_operating_point_current"),
+import { z as z194 } from "zod";
+var simulation_dc_operating_point_current = z194.object({
+  type: z194.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z193.string(),
+  simulation_experiment_id: z194.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z193.string(),
-  current: z193.number(),
-  name: z193.string().optional(),
-  color: z193.string().optional()
+  simulation_current_probe_id: z194.string(),
+  current: z194.number(),
+  name: z194.string().optional(),
+  color: z194.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z194 } from "zod";
-var simulation_dc_sweep_voltage_graph = z194.object({
-  type: z194.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z195 } from "zod";
+var simulation_dc_sweep_voltage_graph = z195.object({
+  type: z195.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z194.string(),
+  simulation_experiment_id: z195.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z194.string(),
-  sweep_values: z194.array(z194.number()),
+  simulation_voltage_probe_id: z195.string(),
+  sweep_values: z195.array(z195.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z194.array(z194.number()),
-  name: z194.string().optional(),
-  color: z194.string().optional()
+  voltage_levels: z195.array(z195.number()),
+  name: z195.string().optional(),
+  color: z195.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4398,20 +4416,20 @@ var simulation_dc_sweep_voltage_graph = z194.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z195 } from "zod";
-var simulation_dc_sweep_current_graph = z195.object({
-  type: z195.literal("simulation_dc_sweep_current_graph"),
+import { z as z196 } from "zod";
+var simulation_dc_sweep_current_graph = z196.object({
+  type: z196.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z195.string(),
+  simulation_experiment_id: z196.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z195.string(),
-  sweep_values: z195.array(z195.number()),
+  simulation_current_probe_id: z196.string(),
+  sweep_values: z196.array(z196.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z195.array(z195.number()),
-  name: z195.string().optional(),
-  color: z195.string().optional()
+  current_levels: z196.array(z196.number()),
+  name: z196.string().optional(),
+  color: z196.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4421,29 +4439,29 @@ var simulation_dc_sweep_current_graph = z195.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z197 } from "zod";
+import { z as z198 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z196 } from "zod";
-var simulation_complex_sample = z196.object({
-  re: z196.number(),
-  im: z196.number()
+import { z as z197 } from "zod";
+var simulation_complex_sample = z197.object({
+  re: z197.number(),
+  im: z197.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z197.object({
-  type: z197.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z198.object({
+  type: z198.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z197.string(),
+  simulation_experiment_id: z198.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z197.string(),
-  frequencies_hz: z197.array(z197.number()),
-  complex_voltages: z197.array(simulation_complex_sample),
-  name: z197.string().optional(),
-  color: z197.string().optional()
+  simulation_voltage_probe_id: z198.string(),
+  frequencies_hz: z198.array(z198.number()),
+  complex_voltages: z198.array(simulation_complex_sample),
+  name: z198.string().optional(),
+  color: z198.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4453,19 +4471,19 @@ var simulation_ac_sweep_voltage_graph = z197.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z198 } from "zod";
-var simulation_ac_sweep_current_graph = z198.object({
-  type: z198.literal("simulation_ac_sweep_current_graph"),
+import { z as z199 } from "zod";
+var simulation_ac_sweep_current_graph = z199.object({
+  type: z199.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z198.string(),
+  simulation_experiment_id: z199.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z198.string(),
-  frequencies_hz: z198.array(z198.number()),
-  complex_currents: z198.array(simulation_complex_sample),
-  name: z198.string().optional(),
-  color: z198.string().optional()
+  simulation_current_probe_id: z199.string(),
+  frequencies_hz: z199.array(z199.number()),
+  complex_currents: z199.array(simulation_complex_sample),
+  name: z199.string().optional(),
+  color: z199.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4475,52 +4493,52 @@ var simulation_ac_sweep_current_graph = z198.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z199 } from "zod";
-var simulation_op_amp = z199.object({
-  type: z199.literal("simulation_op_amp"),
+import { z as z200 } from "zod";
+var simulation_op_amp = z200.object({
+  type: z200.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z199.string().optional(),
-  inverting_input_source_port_id: z199.string(),
-  non_inverting_input_source_port_id: z199.string(),
-  output_source_port_id: z199.string(),
-  positive_supply_source_port_id: z199.string(),
-  negative_supply_source_port_id: z199.string()
+  source_component_id: z200.string().optional(),
+  inverting_input_source_port_id: z200.string(),
+  non_inverting_input_source_port_id: z200.string(),
+  output_source_port_id: z200.string(),
+  positive_supply_source_port_id: z200.string(),
+  negative_supply_source_port_id: z200.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z200 } from "zod";
-var simulation_spice_subcircuit = z200.object({
-  type: z200.literal("simulation_spice_subcircuit"),
+import { z as z201 } from "zod";
+var simulation_spice_subcircuit = z201.object({
+  type: z201.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z200.string(),
-  spice_pin_to_source_port_map: z200.record(z200.string(), z200.string()),
-  subcircuit_source: z200.string()
+  source_component_id: z201.string(),
+  spice_pin_to_source_port_map: z201.record(z201.string(), z201.string()),
+  subcircuit_source: z201.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z201 } from "zod";
+import { z as z202 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z201.object({
-  type: z201.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z202.object({
+  type: z202.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z201.string().optional(),
-  simulation_transient_current_graph_id: z201.string().optional(),
-  simulation_voltage_probe_id: z201.string().optional(),
-  simulation_current_probe_id: z201.string().optional(),
-  display_name: z201.string().optional(),
-  color: z201.string().optional(),
-  display_center_value: z201.number().optional(),
-  display_center_offset_divs: z201.number().optional(),
-  volts_per_div: z201.number().positive().optional(),
-  amps_per_div: z201.number().positive().optional()
+  simulation_transient_voltage_graph_id: z202.string().optional(),
+  simulation_transient_current_graph_id: z202.string().optional(),
+  simulation_voltage_probe_id: z202.string().optional(),
+  simulation_current_probe_id: z202.string().optional(),
+  display_name: z202.string().optional(),
+  color: z202.string().optional(),
+  display_center_value: z202.number().optional(),
+  display_center_offset_divs: z202.number().optional(),
+  volts_per_div: z202.number().positive().optional(),
+  amps_per_div: z202.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4534,19 +4552,19 @@ var simulation_oscilloscope_trace = z201.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z201.ZodIssueCode.custom,
+      code: z202.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z201.ZodIssueCode.custom,
+      code: z202.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z201.ZodIssueCode.custom,
+      code: z202.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4554,8 +4572,8 @@ var simulation_oscilloscope_trace = z201.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z202 } from "zod";
-var any_circuit_element = z202.union([
+import { z as z203 } from "zod";
+var any_circuit_element = z203.union([
   source_trace,
   source_port,
   source_component_internal_connection,
@@ -4610,6 +4628,7 @@ var any_circuit_element = z202.union([
   pcb_connector_not_in_accessible_orientation_warning,
   pcb_component_missing_courtyard_warning,
   supplier_footprint_mismatch_warning,
+  pcb_fabricator_extra_charge_warning,
   pcb_plated_hole,
   pcb_keepout,
   pcb_port,
@@ -4806,6 +4825,7 @@ export {
   pcb_fabrication_note_path,
   pcb_fabrication_note_rect,
   pcb_fabrication_note_text,
+  pcb_fabricator_extra_charge_warning,
   pcb_footprint_overlap_error,
   pcb_ground_plane,
   pcb_ground_plane_region,