circuit-json 0.0.461 → 0.0.463

package/README.md

@@ -1344,6 +1344,7 @@ interface PcbBoard extends ManufacturingDrcProperties {
   is_subcircuit?: boolean
   subcircuit_id?: string
   is_mounted_to_carrier_board?: boolean
+  is_via_in_pad_allowed?: boolean
   width?: Length
   height?: Length
   display_offset_x?: string

package/dist/index.d.mts

@@ -5749,6 +5749,7 @@ declare const pcb_smtpad_pill: z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -5766,6 +5767,7 @@ declare const pcb_smtpad_pill: z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -5785,6 +5787,7 @@ declare const pcb_smtpad_pill: z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>;
 declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
@@ -5809,6 +5812,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -5824,6 +5828,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -5841,6 +5846,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"rect">;
@@ -5871,6 +5877,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -5888,6 +5895,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -5912,6 +5920,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -5948,6 +5957,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -5966,6 +5976,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -5991,6 +6002,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -6022,6 +6034,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -6040,6 +6053,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -6060,6 +6074,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"pill">;
@@ -6085,6 +6100,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -6102,6 +6118,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -6121,6 +6138,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"polygon">;
@@ -6151,6 +6169,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -6167,6 +6186,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
@@ -6185,6 +6205,7 @@ declare const pcb_smtpad: z.ZodDiscriminatedUnion<"shape", [z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>]>;
 type PCBSMTPadInput = z.input<typeof pcb_smtpad>;
 /**
@@ -6205,6 +6226,7 @@ interface PcbSmtPadCircle {
     pcb_port_id?: string;
     is_covered_with_solder_mask?: boolean;
     soldermask_margin?: number;
+    solderpaste_margin?: number;
 }
 /**
  * Defines a rectangular SMT pad on the PCB
@@ -6231,6 +6253,7 @@ interface PcbSmtPadRect {
     soldermask_margin_top?: number;
     soldermask_margin_right?: number;
     soldermask_margin_bottom?: number;
+    solderpaste_margin?: number;
 }
 /**
  * Defines a rotated rectangular SMT pad on the PCB
@@ -6258,6 +6281,7 @@ interface PcbSmtPadRotatedRect {
     soldermask_margin_top?: number;
     soldermask_margin_right?: number;
     soldermask_margin_bottom?: number;
+    solderpaste_margin?: number;
 }
 /**
  * Defines a pill-shaped SMT pad on the PCB (rounded rectangle).
@@ -6279,6 +6303,7 @@ interface PcbSmtPadPill {
     pcb_port_id?: string;
     is_covered_with_solder_mask?: boolean;
     soldermask_margin?: number;
+    solderpaste_margin?: number;
 }
 /**
  * Defines a rotated pill-shaped SMT pad on the PCB
@@ -6301,6 +6326,7 @@ interface PcbSmtPadRotatedPill {
     pcb_port_id?: string;
     is_covered_with_solder_mask?: boolean;
     soldermask_margin?: number;
+    solderpaste_margin?: number;
 }
 /**
  * Defines a polygonal SMT pad on the PCB
@@ -6318,6 +6344,7 @@ interface PcbSmtPadPolygon {
     pcb_port_id?: string;
     is_covered_with_solder_mask?: boolean;
     soldermask_margin?: number;
+    solderpaste_margin?: number;
 }
 type PcbSmtPad = PcbSmtPadCircle | PcbSmtPadRect | PcbSmtPadRotatedRect | PcbSmtPadRotatedPill | PcbSmtPadPill | PcbSmtPadPolygon;
 /**
@@ -8029,6 +8056,7 @@ declare const pcb_board: z.ZodObject<{
     is_subcircuit: z.ZodOptional<z.ZodBoolean>;
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
+    is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -8120,6 +8148,7 @@ declare const pcb_board: z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
@@ -8161,6 +8190,7 @@ declare const pcb_board: z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     num_layers?: number | undefined;
     outline?: {
         x: string | number;
@@ -8181,6 +8211,7 @@ interface PcbBoard extends ManufacturingDrcProperties {
     is_subcircuit?: boolean;
     subcircuit_id?: string;
     is_mounted_to_carrier_board?: boolean;
+    is_via_in_pad_allowed?: boolean;
     width?: Length;
     height?: Length;
     display_offset_x?: string;
@@ -42107,6 +42138,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -42122,6 +42154,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -42139,6 +42172,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"rect">;
@@ -42169,6 +42203,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -42186,6 +42221,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -42210,6 +42246,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -42246,6 +42283,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -42264,6 +42302,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -42289,6 +42328,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -42320,6 +42360,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -42338,6 +42379,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -42358,6 +42400,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"pill">;
@@ -42383,6 +42426,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -42400,6 +42444,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -42419,6 +42464,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"polygon">;
@@ -42449,6 +42495,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -42465,6 +42512,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
@@ -42483,6 +42531,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>]>, z.ZodUnion<[z.ZodObject<{
     type: z.ZodLiteral<"pcb_solder_paste">;
     shape: z.ZodLiteral<"circle">;
@@ -42794,6 +42843,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit: z.ZodOptional<z.ZodBoolean>;
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
+    is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -42885,6 +42935,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
@@ -42926,6 +42977,7 @@ declare const any_circuit_element: z.ZodUnion<[z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     num_layers?: number | undefined;
     outline?: {
         x: string | number;
@@ -62074,6 +62126,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -62089,6 +62142,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -62106,6 +62160,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"rect">;
@@ -62136,6 +62191,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -62153,6 +62209,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -62177,6 +62234,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -62213,6 +62271,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin_top: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_right: z.ZodOptional<z.ZodNumber>;
     soldermask_margin_bottom: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -62231,6 +62290,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -62256,6 +62316,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id?: string | undefined;
     rect_border_radius?: number | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
     corner_radius?: number | undefined;
     soldermask_margin_left?: number | undefined;
     soldermask_margin_top?: number | undefined;
@@ -62287,6 +62348,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -62305,6 +62367,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -62325,6 +62388,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"pill">;
@@ -62350,6 +62414,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     x: number;
@@ -62367,6 +62432,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     x: string | number;
@@ -62386,6 +62452,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>, z.ZodObject<{
     type: z.ZodLiteral<"pcb_smtpad">;
     shape: z.ZodLiteral<"polygon">;
@@ -62416,6 +62483,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     pcb_port_id: z.ZodOptional<z.ZodString>;
     is_covered_with_solder_mask: z.ZodOptional<z.ZodBoolean>;
     soldermask_margin: z.ZodOptional<z.ZodNumber>;
+    solderpaste_margin: z.ZodOptional<z.ZodNumber>;
 }, "strip", z.ZodTypeAny, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8";
@@ -62432,6 +62500,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     soldermask_margin?: number | undefined;
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }, {
     type: "pcb_smtpad";
     layer: "top" | "bottom" | "inner1" | "inner2" | "inner3" | "inner4" | "inner5" | "inner6" | "inner7" | "inner8" | {
@@ -62450,6 +62519,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     port_hints?: string[] | undefined;
     pcb_port_id?: string | undefined;
     pcb_smtpad_id?: string | undefined;
+    solderpaste_margin?: number | undefined;
 }>]>, z.ZodUnion<[z.ZodObject<{
     type: z.ZodLiteral<"pcb_solder_paste">;
     shape: z.ZodLiteral<"circle">;
@@ -62761,6 +62831,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     is_subcircuit: z.ZodOptional<z.ZodBoolean>;
     subcircuit_id: z.ZodOptional<z.ZodString>;
     is_mounted_to_carrier_board: z.ZodOptional<z.ZodBoolean>;
+    is_via_in_pad_allowed: z.ZodOptional<z.ZodBoolean>;
     width: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     height: z.ZodOptional<z.ZodEffects<z.ZodUnion<[z.ZodString, z.ZodNumber]>, number, string | number>>;
     center: z.ZodObject<{
@@ -62852,6 +62923,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     outline?: {
         x: number;
         y: number;
@@ -62893,6 +62965,7 @@ declare const any_soup_element: z.ZodUnion<[z.ZodObject<{
     carrier_pcb_board_id?: string | undefined;
     is_subcircuit?: boolean | undefined;
     is_mounted_to_carrier_board?: boolean | undefined;
+    is_via_in_pad_allowed?: boolean | undefined;
     num_layers?: number | undefined;
     outline?: {
         x: string | number;

package/dist/index.mjs

@@ -2076,7 +2076,8 @@ var pcb_smtpad_circle = z105.object({
   pcb_component_id: z105.string().optional(),
   pcb_port_id: z105.string().optional(),
   is_covered_with_solder_mask: z105.boolean().optional(),
-  soldermask_margin: z105.number().optional()
+  soldermask_margin: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad_rect = z105.object({
   type: z105.literal("pcb_smtpad"),
@@ -2099,7 +2100,8 @@ var pcb_smtpad_rect = z105.object({
   soldermask_margin_left: z105.number().optional(),
   soldermask_margin_top: z105.number().optional(),
   soldermask_margin_right: z105.number().optional(),
-  soldermask_margin_bottom: z105.number().optional()
+  soldermask_margin_bottom: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad_rotated_rect = z105.object({
   type: z105.literal("pcb_smtpad"),
@@ -2123,7 +2125,8 @@ var pcb_smtpad_rotated_rect = z105.object({
   soldermask_margin_left: z105.number().optional(),
   soldermask_margin_top: z105.number().optional(),
   soldermask_margin_right: z105.number().optional(),
-  soldermask_margin_bottom: z105.number().optional()
+  soldermask_margin_bottom: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad_pill = z105.object({
   type: z105.literal("pcb_smtpad"),
@@ -2141,7 +2144,8 @@ var pcb_smtpad_pill = z105.object({
   pcb_component_id: z105.string().optional(),
   pcb_port_id: z105.string().optional(),
   is_covered_with_solder_mask: z105.boolean().optional(),
-  soldermask_margin: z105.number().optional()
+  soldermask_margin: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad_rotated_pill = z105.object({
   type: z105.literal("pcb_smtpad"),
@@ -2160,7 +2164,8 @@ var pcb_smtpad_rotated_pill = z105.object({
   pcb_component_id: z105.string().optional(),
   pcb_port_id: z105.string().optional(),
   is_covered_with_solder_mask: z105.boolean().optional(),
-  soldermask_margin: z105.number().optional()
+  soldermask_margin: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad_polygon = z105.object({
   type: z105.literal("pcb_smtpad"),
@@ -2174,7 +2179,8 @@ var pcb_smtpad_polygon = z105.object({
   pcb_component_id: z105.string().optional(),
   pcb_port_id: z105.string().optional(),
   is_covered_with_solder_mask: z105.boolean().optional(),
-  soldermask_margin: z105.number().optional()
+  soldermask_margin: z105.number().optional(),
+  solderpaste_margin: z105.number().optional()
 });
 var pcb_smtpad = z105.discriminatedUnion("shape", [
   pcb_smtpad_circle,
@@ -2515,6 +2521,7 @@ var pcb_board = z117.object({
   is_subcircuit: z117.boolean().optional(),
   subcircuit_id: z117.string().optional(),
   is_mounted_to_carrier_board: z117.boolean().optional(),
+  is_via_in_pad_allowed: z117.boolean().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,