circuit-json 0.0.460 → 0.0.462

package/dist/index.mjs

@@ -1642,32 +1642,84 @@ var brep_shape = z96.object({
 });
 expectTypesMatch(true);
 
-// src/pcb/properties/pcb_route_hints.ts
+// src/pcb/properties/insertion_direction.ts
 import { z as z97 } from "zod";
-var pcb_route_hint = z97.object({
+var insertionDirectionToCanonical = {
+  from_left: "from_left",
+  from_right: "from_right",
+  from_top: "from_top",
+  from_bottom: "from_bottom",
+  from_above: "from_above",
+  from_below: "from_below",
+  from_x_neg: "from_left",
+  from_x_pos: "from_right",
+  from_y_pos: "from_top",
+  from_y_neg: "from_bottom",
+  from_z_pos: "from_above",
+  from_z_neg: "from_below",
+  /** @deprecated use `from_top` */
+  from_front: "from_top",
+  /** @deprecated use `from_bottom` */
+  from_back: "from_bottom"
+};
+var insertionDirectionToVector = {
+  from_left: { x: -1, y: 0, z: 0 },
+  from_right: { x: 1, y: 0, z: 0 },
+  from_top: { x: 0, y: 1, z: 0 },
+  from_bottom: { x: 0, y: -1, z: 0 },
+  from_above: { x: 0, y: 0, z: 1 },
+  from_below: { x: 0, y: 0, z: -1 }
+};
+var insertion_direction = z97.enum([
+  "from_left",
+  "from_right",
+  "from_top",
+  "from_bottom",
+  "from_above",
+  "from_below",
+  "from_x_neg",
+  "from_x_pos",
+  "from_y_pos",
+  "from_y_neg",
+  "from_z_pos",
+  "from_z_neg",
+  // Deprecated, accepted so existing Circuit JSON keeps parsing.
+  "from_front",
+  "from_back"
+]).transform((value) => insertionDirectionToCanonical[value]).describe(
+  'The side exposing the receptacle where the cable or mating part is attached, following the 2D PCB diagram convention, not a 3D viewport frame. In project coordinate space, "from_top" is +Y, "from_bottom" -Y, "from_left" -X, "from_right" +X, "from_above" +Z and "from_below" -Z. A receptacle on the +Y edge is "from_top" even though the plug moves in -Y as it seats. Cartesian spellings such as "from_y_pos" are accepted and normalized to the named values, as are the deprecated "from_front" (now "from_top") and "from_back" (now "from_bottom").'
+);
+expectTypesMatch(true);
+expectTypesMatch(
+  true
+);
+
+// src/pcb/properties/pcb_route_hints.ts
+import { z as z98 } from "zod";
+var pcb_route_hint = z98.object({
   x: distance,
   y: distance,
-  via: z97.boolean().optional(),
+  via: z98.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z97.array(pcb_route_hint);
+var pcb_route_hints = z98.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z98 } from "zod";
-var route_hint_point = z98.object({
+import { z as z99 } from "zod";
+var route_hint_point = z99.object({
   x: distance,
   y: distance,
-  via: z98.boolean().optional(),
+  via: z99.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/properties/manufacturing_drc_properties.ts
-import { z as z99 } from "zod";
-var manufacturing_drc_properties = z99.object({
+import { z as z100 } from "zod";
+var manufacturing_drc_properties = z100.object({
   min_trace_width: length.optional(),
   min_board_edge_clearance: length.optional(),
   min_via_hole_edge_to_via_hole_edge_clearance: length.optional(),
@@ -1682,27 +1734,27 @@ var manufacturing_drc_properties = z99.object({
 });
 
 // src/pcb/pcb_component.ts
-import { z as z100 } from "zod";
-var pcb_component = z100.object({
-  type: z100.literal("pcb_component"),
+import { z as z101 } from "zod";
+var pcb_component = z101.object({
+  type: z101.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z100.string(),
+  source_component_id: z101.string(),
   center: point,
   layer: layer_ref,
   rotation,
-  display_offset_x: z100.string().optional().describe(
+  display_offset_x: z101.string().optional().describe(
     "How to display the x offset for this part, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z100.string().optional().describe(
+  display_offset_y: z101.string().optional().describe(
     "How to display the y offset for this part, usually corresponding with how the user specified it"
   ),
   width: length,
   height: length,
-  do_not_place: z100.boolean().optional(),
-  is_allowed_to_be_off_board: z100.boolean().optional(),
-  subcircuit_id: z100.string().optional(),
-  pcb_group_id: z100.string().optional(),
-  position_mode: z100.enum([
+  do_not_place: z101.boolean().optional(),
+  is_allowed_to_be_off_board: z101.boolean().optional(),
+  subcircuit_id: z101.string().optional(),
+  pcb_group_id: z101.string().optional(),
+  position_mode: z101.enum([
     "packed",
     "relative_to_group_anchor",
     "relative_to_another_component",
@@ -1710,129 +1762,123 @@ var pcb_component = z100.object({
   ]).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  positioned_relative_to_pcb_group_id: z100.string().optional(),
-  positioned_relative_to_pcb_board_id: z100.string().optional(),
+  positioned_relative_to_pcb_group_id: z101.string().optional(),
+  positioned_relative_to_pcb_board_id: z101.string().optional(),
   cable_insertion_center: point.optional(),
-  insertion_direction: z100.enum([
-    "from_above",
-    "from_left",
-    "from_right",
-    "from_front",
-    "from_back"
-  ]).optional(),
-  metadata: z100.object({
+  insertion_direction: insertion_direction.optional(),
+  metadata: z101.object({
     kicad_footprint: kicadFootprintMetadata.optional()
   }).optional(),
-  obstructs_within_bounds: z100.boolean().default(true).describe(
+  obstructs_within_bounds: z101.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z101 } from "zod";
-var pcb_hole_circle = z101.object({
-  type: z101.literal("pcb_hole"),
+import { z as z102 } from "zod";
+var pcb_hole_circle = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.literal("circle"),
-  hole_diameter: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.literal("circle"),
+  hole_diameter: z102.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_circle_shape = pcb_hole_circle.describe(
   "Defines a circular hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rect = z101.object({
-  type: z101.literal("pcb_hole"),
+var pcb_hole_rect = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.literal("rect"),
-  hole_width: z101.number(),
-  hole_height: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.literal("rect"),
+  hole_width: z102.number(),
+  hole_height: z102.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_rect_shape = pcb_hole_rect.describe(
   "Defines a rectangular (square-capable) hole on the PCB. Use equal width/height for square."
 );
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z101.object({
-  type: z101.literal("pcb_hole"),
+var pcb_hole_circle_or_square = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.enum(["circle", "square"]),
-  hole_diameter: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.enum(["circle", "square"]),
+  hole_diameter: z102.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z101.object({
-  type: z101.literal("pcb_hole"),
+var pcb_hole_oval = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.literal("oval"),
-  hole_width: z101.number(),
-  hole_height: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.literal("oval"),
+  hole_width: z102.number(),
+  hole_height: z102.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z101.object({
-  type: z101.literal("pcb_hole"),
+var pcb_hole_pill = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.literal("pill"),
-  hole_width: z101.number(),
-  hole_height: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.literal("pill"),
+  hole_width: z102.number(),
+  hole_height: z102.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z101.object({
-  type: z101.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z102.object({
+  type: z102.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  pcb_component_id: z101.string().optional(),
-  hole_shape: z101.literal("rotated_pill"),
-  hole_width: z101.number(),
-  hole_height: z101.number(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  hole_shape: z102.literal("rotated_pill"),
+  hole_width: z102.number(),
+  hole_height: z102.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  is_covered_with_solder_mask: z101.boolean().optional(),
-  soldermask_margin: z101.number().optional()
+  is_covered_with_solder_mask: z102.boolean().optional(),
+  soldermask_margin: z102.number().optional()
 });
 var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
   "Defines a rotated pill-shaped hole on the PCB"
@@ -1841,147 +1887,147 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill).or(pcb_hole_circle).or(pcb_hole_rect);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z102 } from "zod";
-var pcb_plated_hole_circle = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.literal("circle"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  outer_diameter: z102.number(),
-  hole_diameter: z102.number(),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+import { z as z103 } from "zod";
+var pcb_plated_hole_circle = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.literal("circle"),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  outer_diameter: z103.number(),
+  hole_diameter: z103.number(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional()
+  soldermask_margin: z103.number().optional()
 });
-var pcb_plated_hole_oval = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.enum(["oval", "pill"]),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  outer_width: z102.number(),
-  outer_height: z102.number(),
-  hole_width: z102.number(),
-  hole_height: z102.number(),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+var pcb_plated_hole_oval = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.enum(["oval", "pill"]),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  outer_width: z103.number(),
+  outer_height: z103.number(),
+  hole_width: z103.number(),
+  hole_height: z103.number(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional()
+  soldermask_margin: z103.number().optional()
 });
-var pcb_circular_hole_with_rect_pad = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  hole_shape: z102.literal("circle"),
-  pad_shape: z102.literal("rect"),
-  hole_diameter: z102.number(),
-  rect_pad_width: z102.number(),
-  rect_pad_height: z102.number(),
-  rect_border_radius: z102.number().optional(),
+var pcb_circular_hole_with_rect_pad = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  hole_shape: z103.literal("circle"),
+  pad_shape: z103.literal("rect"),
+  hole_diameter: z103.number(),
+  rect_pad_width: z103.number(),
+  rect_pad_height: z103.number(),
+  rect_border_radius: z103.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional(),
+  soldermask_margin: z103.number().optional(),
   rect_ccw_rotation: rotation.optional()
 });
-var pcb_pill_hole_with_rect_pad = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  hole_shape: z102.literal("pill"),
-  pad_shape: z102.literal("rect"),
-  hole_width: z102.number(),
-  hole_height: z102.number(),
-  rect_pad_width: z102.number(),
-  rect_pad_height: z102.number(),
-  rect_border_radius: z102.number().optional(),
+var pcb_pill_hole_with_rect_pad = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  hole_shape: z103.literal("pill"),
+  pad_shape: z103.literal("rect"),
+  hole_width: z103.number(),
+  hole_height: z103.number(),
+  rect_pad_width: z103.number(),
+  rect_pad_height: z103.number(),
+  rect_border_radius: z103.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional()
+  soldermask_margin: z103.number().optional()
 });
-var pcb_rotated_pill_hole_with_rect_pad = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  hole_shape: z102.literal("rotated_pill"),
-  pad_shape: z102.literal("rect"),
-  hole_width: z102.number(),
-  hole_height: z102.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  hole_shape: z103.literal("rotated_pill"),
+  pad_shape: z103.literal("rect"),
+  hole_width: z103.number(),
+  hole_height: z103.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z102.number(),
-  rect_pad_height: z102.number(),
-  rect_border_radius: z102.number().optional(),
+  rect_pad_width: z103.number(),
+  rect_pad_height: z103.number(),
+  rect_border_radius: z103.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional()
+  soldermask_margin: z103.number().optional()
 });
-var pcb_hole_with_polygon_pad = z102.object({
-  type: z102.literal("pcb_plated_hole"),
-  shape: z102.literal("hole_with_polygon_pad"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  hole_shape: z102.enum(["circle", "oval", "pill", "rotated_pill"]),
-  hole_diameter: z102.number().optional(),
-  hole_width: z102.number().optional(),
-  hole_height: z102.number().optional(),
-  pad_outline: z102.array(
-    z102.object({
+var pcb_hole_with_polygon_pad = z103.object({
+  type: z103.literal("pcb_plated_hole"),
+  shape: z103.literal("hole_with_polygon_pad"),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  hole_shape: z103.enum(["circle", "oval", "pill", "rotated_pill"]),
+  hole_diameter: z103.number().optional(),
+  hole_width: z103.number().optional(),
+  hole_height: z103.number().optional(),
+  pad_outline: z103.array(
+    z103.object({
       x: distance,
       y: distance
     })
   ).min(3),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z102.boolean().optional(),
+  is_covered_with_solder_mask: z103.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z102.array(layer_ref),
-  port_hints: z102.array(z102.string()).optional(),
-  pcb_component_id: z102.string().optional(),
-  pcb_port_id: z102.string().optional(),
+  layers: z103.array(layer_ref),
+  port_hints: z103.array(z103.string()).optional(),
+  pcb_component_id: z103.string().optional(),
+  pcb_port_id: z103.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z102.number().optional(),
+  soldermask_margin: z103.number().optional(),
   ccw_rotation: rotation.optional()
 });
-var pcb_plated_hole = z102.union([
+var pcb_plated_hole = z103.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -1999,138 +2045,138 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z103 } from "zod";
-var pcb_port = z103.object({
-  type: z103.literal("pcb_port"),
+import { z as z104 } from "zod";
+var pcb_port = z104.object({
+  type: z104.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
-  source_port_id: z103.string(),
-  pcb_component_id: z103.string().optional(),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
+  source_port_id: z104.string(),
+  pcb_component_id: z104.string().optional(),
   x: distance,
   y: distance,
-  layers: z103.array(layer_ref),
-  is_board_pinout: z103.boolean().optional()
+  layers: z104.array(layer_ref),
+  is_board_pinout: z104.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z104 } from "zod";
-var pcb_smtpad_circle = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("circle"),
+import { z as z105 } from "zod";
+var pcb_smtpad_circle = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
   x: distance,
   y: distance,
-  radius: z104.number(),
+  radius: z105.number(),
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional()
 });
-var pcb_smtpad_rect = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("rect"),
+var pcb_smtpad_rect = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
   x: distance,
   y: distance,
-  width: z104.number(),
-  height: z104.number(),
-  rect_border_radius: z104.number().optional(),
-  corner_radius: z104.number().optional(),
+  width: z105.number(),
+  height: z105.number(),
+  rect_border_radius: z105.number().optional(),
+  corner_radius: z105.number().optional(),
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional(),
-  soldermask_margin_left: z104.number().optional(),
-  soldermask_margin_top: z104.number().optional(),
-  soldermask_margin_right: z104.number().optional(),
-  soldermask_margin_bottom: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional(),
+  soldermask_margin_left: z105.number().optional(),
+  soldermask_margin_top: z105.number().optional(),
+  soldermask_margin_right: z105.number().optional(),
+  soldermask_margin_bottom: z105.number().optional()
 });
-var pcb_smtpad_rotated_rect = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
   x: distance,
   y: distance,
-  width: z104.number(),
-  height: z104.number(),
-  rect_border_radius: z104.number().optional(),
-  corner_radius: z104.number().optional(),
+  width: z105.number(),
+  height: z105.number(),
+  rect_border_radius: z105.number().optional(),
+  corner_radius: z105.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional(),
-  soldermask_margin_left: z104.number().optional(),
-  soldermask_margin_top: z104.number().optional(),
-  soldermask_margin_right: z104.number().optional(),
-  soldermask_margin_bottom: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional(),
+  soldermask_margin_left: z105.number().optional(),
+  soldermask_margin_top: z105.number().optional(),
+  soldermask_margin_right: z105.number().optional(),
+  soldermask_margin_bottom: z105.number().optional()
 });
-var pcb_smtpad_pill = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("pill"),
+var pcb_smtpad_pill = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
   x: distance,
   y: distance,
-  width: z104.number(),
-  height: z104.number(),
-  radius: z104.number(),
+  width: z105.number(),
+  height: z105.number(),
+  radius: z105.number(),
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional()
 });
-var pcb_smtpad_rotated_pill = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("rotated_pill"),
+var pcb_smtpad_rotated_pill = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
   x: distance,
   y: distance,
-  width: z104.number(),
-  height: z104.number(),
-  radius: z104.number(),
+  width: z105.number(),
+  height: z105.number(),
+  radius: z105.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional()
 });
-var pcb_smtpad_polygon = z104.object({
-  type: z104.literal("pcb_smtpad"),
-  shape: z104.literal("polygon"),
+var pcb_smtpad_polygon = z105.object({
+  type: z105.literal("pcb_smtpad"),
+  shape: z105.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
-  points: z104.array(point),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
+  points: z105.array(point),
   layer: layer_ref,
-  port_hints: z104.array(z104.string()).optional(),
-  pcb_component_id: z104.string().optional(),
-  pcb_port_id: z104.string().optional(),
-  is_covered_with_solder_mask: z104.boolean().optional(),
-  soldermask_margin: z104.number().optional()
+  port_hints: z105.array(z105.string()).optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_port_id: z105.string().optional(),
+  is_covered_with_solder_mask: z105.boolean().optional(),
+  soldermask_margin: z105.number().optional()
 });
-var pcb_smtpad = z104.discriminatedUnion("shape", [
+var pcb_smtpad = z105.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -2146,95 +2192,95 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z105 } from "zod";
-var pcb_solder_paste_circle = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("circle"),
+import { z as z106 } from "zod";
+var pcb_solder_paste_circle = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  radius: z105.number(),
+  radius: z106.number(),
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste_rect = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("rect"),
+var pcb_solder_paste_rect = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  width: z105.number(),
-  height: z105.number(),
+  width: z106.number(),
+  height: z106.number(),
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste_pill = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("pill"),
+var pcb_solder_paste_pill = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  width: z105.number(),
-  height: z105.number(),
-  radius: z105.number(),
+  width: z106.number(),
+  height: z106.number(),
+  radius: z106.number(),
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  width: z105.number(),
-  height: z105.number(),
+  width: z106.number(),
+  height: z106.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste_rotated_pill = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("rotated_pill"),
+var pcb_solder_paste_rotated_pill = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("rotated_pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  width: z105.number(),
-  height: z105.number(),
-  radius: z105.number(),
+  width: z106.number(),
+  height: z106.number(),
+  radius: z106.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste_oval = z105.object({
-  type: z105.literal("pcb_solder_paste"),
-  shape: z105.literal("oval"),
+var pcb_solder_paste_oval = z106.object({
+  type: z106.literal("pcb_solder_paste"),
+  shape: z106.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
   x: distance,
   y: distance,
-  width: z105.number(),
-  height: z105.number(),
+  width: z106.number(),
+  height: z106.number(),
   layer: layer_ref,
-  pcb_component_id: z105.string().optional(),
-  pcb_smtpad_id: z105.string().optional()
+  pcb_component_id: z106.string().optional(),
+  pcb_smtpad_id: z106.string().optional()
 });
-var pcb_solder_paste = z105.union([
+var pcb_solder_paste = z106.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -2254,193 +2300,193 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z106 } from "zod";
-var pcb_text = z106.object({
-  type: z106.literal("pcb_text"),
+import { z as z107 } from "zod";
+var pcb_text = z107.object({
+  type: z107.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z106.string().optional(),
-  subcircuit_id: z106.string().optional(),
-  text: z106.string(),
+  pcb_group_id: z107.string().optional(),
+  subcircuit_id: z107.string().optional(),
+  text: z107.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z106.number(),
+  lines: z107.number(),
   // @ts-ignore
-  align: z106.enum(["bottom-left"])
+  align: z107.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z107 } from "zod";
-var pcb_trace_route_point_wire = z107.object({
-  route_type: z107.literal("wire"),
+import { z as z108 } from "zod";
+var pcb_trace_route_point_wire = z108.object({
+  route_type: z108.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  copper_pour_id: z107.string().optional(),
-  is_inside_copper_pour: z107.boolean().optional(),
-  start_pcb_port_id: z107.string().optional(),
-  end_pcb_port_id: z107.string().optional(),
+  copper_pour_id: z108.string().optional(),
+  is_inside_copper_pour: z108.boolean().optional(),
+  start_pcb_port_id: z108.string().optional(),
+  end_pcb_port_id: z108.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z107.object({
-  route_type: z107.literal("via"),
+var pcb_trace_route_point_via = z108.object({
+  route_type: z108.literal("via"),
   x: distance,
   y: distance,
-  copper_pour_id: z107.string().optional(),
-  is_inside_copper_pour: z107.boolean().optional(),
+  copper_pour_id: z108.string().optional(),
+  is_inside_copper_pour: z108.boolean().optional(),
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
   from_layer: layer_ref,
   to_layer: layer_ref
 });
-var pcb_trace_route_point_through_pad = z107.object({
-  route_type: z107.literal("through_pad"),
+var pcb_trace_route_point_through_pad = z108.object({
+  route_type: z108.literal("through_pad"),
   start: point,
   end: point,
   width: distance,
   start_layer: layer_ref,
   end_layer: layer_ref,
-  pcb_smtpad_id: z107.string().optional(),
-  pcb_plated_hole_id: z107.string().optional()
+  pcb_smtpad_id: z108.string().optional(),
+  pcb_plated_hole_id: z108.string().optional()
 });
-var pcb_trace_route_point = z107.union([
+var pcb_trace_route_point = z108.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via,
   pcb_trace_route_point_through_pad
 ]);
-var pcb_trace = z107.object({
-  type: z107.literal("pcb_trace"),
-  source_trace_id: z107.string().optional(),
-  pcb_component_id: z107.string().optional(),
+var pcb_trace = z108.object({
+  type: z108.literal("pcb_trace"),
+  source_trace_id: z108.string().optional(),
+  pcb_component_id: z108.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z107.string().optional(),
-  subcircuit_id: z107.string().optional(),
-  route_thickness_mode: z107.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z107.number().optional(),
-  should_round_corners: z107.boolean().optional(),
-  trace_length: z107.number().optional(),
-  highlight_color: z107.string().optional(),
-  route: z107.array(pcb_trace_route_point)
+  pcb_group_id: z108.string().optional(),
+  subcircuit_id: z108.string().optional(),
+  route_thickness_mode: z108.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z108.number().optional(),
+  should_round_corners: z108.boolean().optional(),
+  trace_length: z108.number().optional(),
+  highlight_color: z108.string().optional(),
+  route: z108.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_warning.ts
-import { z as z108 } from "zod";
-var pcb_trace_warning = z108.object({
-  type: z108.literal("pcb_trace_warning"),
+import { z as z109 } from "zod";
+var pcb_trace_warning = z109.object({
+  type: z109.literal("pcb_trace_warning"),
   pcb_trace_warning_id: getZodPrefixedIdWithDefault("pcb_trace_warning"),
-  warning_type: z108.literal("pcb_trace_warning").default("pcb_trace_warning"),
-  message: z108.string(),
+  warning_type: z109.literal("pcb_trace_warning").default("pcb_trace_warning"),
+  message: z109.string(),
   center: point.optional(),
-  pcb_trace_id: z108.string(),
-  source_trace_id: z108.string(),
-  pcb_component_ids: z108.array(z108.string()),
-  pcb_port_ids: z108.array(z108.string()),
-  subcircuit_id: z108.string().optional()
+  pcb_trace_id: z109.string(),
+  source_trace_id: z109.string(),
+  pcb_component_ids: z109.array(z109.string()),
+  pcb_port_ids: z109.array(z109.string()),
+  subcircuit_id: z109.string().optional()
 }).describe("Defines a trace warning on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_too_long_warning.ts
-import { z as z109 } from "zod";
-var pcb_trace_too_long_warning = z109.object({
-  type: z109.literal("pcb_trace_too_long_warning"),
+import { z as z110 } from "zod";
+var pcb_trace_too_long_warning = z110.object({
+  type: z110.literal("pcb_trace_too_long_warning"),
   pcb_trace_too_long_warning_id: getZodPrefixedIdWithDefault(
     "pcb_trace_too_long_warning"
   ),
-  warning_type: z109.literal("pcb_trace_too_long_warning").default("pcb_trace_too_long_warning"),
-  message: z109.string(),
-  pcb_trace_id: z109.string(),
-  source_net_id: z109.string().optional(),
-  source_trace_id: z109.string().optional(),
+  warning_type: z110.literal("pcb_trace_too_long_warning").default("pcb_trace_too_long_warning"),
+  message: z110.string(),
+  pcb_trace_id: z110.string(),
+  source_net_id: z110.string().optional(),
+  source_trace_id: z110.string().optional(),
   actual_trace_length: distance,
   maximum_trace_length: distance,
-  subcircuit_id: z109.string().optional()
+  subcircuit_id: z110.string().optional()
 }).describe(
   "Warning emitted when a PCB trace is longer than its maximum allowed length"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z110 } from "zod";
+import { z as z111 } from "zod";
 var pcb_trace_error = base_circuit_json_error.extend({
-  type: z110.literal("pcb_trace_error"),
+  type: z111.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z110.literal("pcb_trace_error").default("pcb_trace_error"),
+  error_type: z111.literal("pcb_trace_error").default("pcb_trace_error"),
   center: point.optional(),
-  pcb_trace_id: z110.string(),
-  source_trace_id: z110.string(),
-  pcb_component_ids: z110.array(z110.string()),
-  pcb_port_ids: z110.array(z110.string()),
-  subcircuit_id: z110.string().optional()
+  pcb_trace_id: z111.string(),
+  source_trace_id: z111.string(),
+  pcb_component_ids: z111.array(z111.string()),
+  pcb_port_ids: z111.array(z111.string()),
+  subcircuit_id: z111.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z111 } from "zod";
+import { z as z112 } from "zod";
 var pcb_trace_missing_error = base_circuit_json_error.extend({
-  type: z111.literal("pcb_trace_missing_error"),
+  type: z112.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z111.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  error_type: z112.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
   center: point.optional(),
-  source_trace_id: z111.string(),
-  pcb_component_ids: z111.array(z111.string()),
-  pcb_port_ids: z111.array(z111.string()),
-  subcircuit_id: z111.string().optional()
+  source_trace_id: z112.string(),
+  pcb_component_ids: z112.array(z112.string()),
+  pcb_port_ids: z112.array(z112.string()),
+  subcircuit_id: z112.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z112 } from "zod";
+import { z as z113 } from "zod";
 var pcb_port_not_matched_error = base_circuit_json_error.extend({
-  type: z112.literal("pcb_port_not_matched_error"),
+  type: z113.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z112.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  pcb_component_ids: z112.array(z112.string()),
-  subcircuit_id: z112.string().optional()
+  error_type: z113.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  pcb_component_ids: z113.array(z113.string()),
+  subcircuit_id: z113.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z113 } from "zod";
+import { z as z114 } from "zod";
 var pcb_port_not_connected_error = base_circuit_json_error.extend({
-  type: z113.literal("pcb_port_not_connected_error"),
+  type: z114.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z113.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  pcb_port_ids: z113.array(z113.string()),
-  pcb_component_ids: z113.array(z113.string()),
-  subcircuit_id: z113.string().optional()
+  error_type: z114.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  pcb_port_ids: z114.array(z114.string()),
+  pcb_component_ids: z114.array(z114.string()),
+  subcircuit_id: z114.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_net.ts
-import { z as z114 } from "zod";
-var pcb_net = z114.object({
-  type: z114.literal("pcb_net"),
+import { z as z115 } from "zod";
+var pcb_net = z115.object({
+  type: z115.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z114.string().optional(),
-  highlight_color: z114.string().optional()
+  source_net_id: z115.string().optional(),
+  highlight_color: z115.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z115 } from "zod";
-var pcb_via = z115.object({
-  type: z115.literal("pcb_via"),
+import { z as z116 } from "zod";
+var pcb_via = z116.object({
+  type: z116.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z115.string().optional(),
-  subcircuit_id: z115.string().optional(),
-  subcircuit_connectivity_map_key: z115.string().optional(),
+  pcb_group_id: z116.string().optional(),
+  subcircuit_id: z116.string().optional(),
+  subcircuit_connectivity_map_key: z116.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -2449,116 +2495,117 @@ var pcb_via = z115.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z115.array(layer_ref),
-  pcb_trace_id: z115.string().optional(),
-  source_trace_id: z115.string().optional(),
-  source_net_id: z115.string().min(1).optional(),
-  net_is_assignable: z115.boolean().optional(),
-  net_assigned: z115.boolean().optional(),
-  is_tented: z115.boolean().optional()
+  layers: z116.array(layer_ref),
+  pcb_trace_id: z116.string().optional(),
+  source_trace_id: z116.string().optional(),
+  source_net_id: z116.string().min(1).optional(),
+  net_is_assignable: z116.boolean().optional(),
+  net_assigned: z116.boolean().optional(),
+  is_tented: z116.boolean().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z116 } from "zod";
-var pcb_board = z116.object({
-  type: z116.literal("pcb_board"),
+import { z as z117 } from "zod";
+var pcb_board = z117.object({
+  type: z117.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z116.string().optional(),
-  carrier_pcb_board_id: z116.string().optional(),
-  is_subcircuit: z116.boolean().optional(),
-  subcircuit_id: z116.string().optional(),
-  is_mounted_to_carrier_board: z116.boolean().optional(),
+  pcb_panel_id: z117.string().optional(),
+  carrier_pcb_board_id: z117.string().optional(),
+  is_subcircuit: z117.boolean().optional(),
+  subcircuit_id: z117.string().optional(),
+  is_mounted_to_carrier_board: z117.boolean().optional(),
+  is_via_in_pad_allowed: z117.boolean().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z116.string().optional().describe(
+  display_offset_x: z117.string().optional().describe(
     "How to display the x offset for this board, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z116.string().optional().describe(
+  display_offset_y: z117.string().optional().describe(
     "How to display the y offset for this board, usually corresponding with how the user specified it"
   ),
   thickness: length.optional().default(1.4),
-  num_layers: z116.number().optional().default(4),
-  outline: z116.array(point).optional(),
-  shape: z116.enum(["rect", "polygon"]).optional(),
-  material: z116.enum(["fr4", "fr1"]).default("fr4"),
-  solder_mask_color: z116.string().optional(),
-  silkscreen_color: z116.string().optional(),
+  num_layers: z117.number().optional().default(4),
+  outline: z117.array(point).optional(),
+  shape: z117.enum(["rect", "polygon"]).optional(),
+  material: z117.enum(["fr4", "fr1"]).default("fr4"),
+  solder_mask_color: z117.string().optional(),
+  silkscreen_color: z117.string().optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  position_mode: z116.enum(["relative_to_panel_anchor", "none"]).optional()
+  position_mode: z117.enum(["relative_to_panel_anchor", "none"]).optional()
 }).merge(manufacturing_drc_properties).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z117 } from "zod";
-var pcb_panel = z117.object({
-  type: z117.literal("pcb_panel"),
+import { z as z118 } from "zod";
+var pcb_panel = z118.object({
+  type: z118.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  covered_with_solder_mask: z117.boolean().optional().default(true)
+  covered_with_solder_mask: z118.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z118 } from "zod";
+import { z as z119 } from "zod";
 var pcb_placement_error = base_circuit_json_error.extend({
-  type: z118.literal("pcb_placement_error"),
+  type: z119.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z118.literal("pcb_placement_error").default("pcb_placement_error"),
-  subcircuit_id: z118.string().optional()
+  error_type: z119.literal("pcb_placement_error").default("pcb_placement_error"),
+  subcircuit_id: z119.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_packing_error.ts
-import { z as z119 } from "zod";
+import { z as z120 } from "zod";
 var pcb_packing_error = base_circuit_json_error.extend({
-  type: z119.literal("pcb_packing_error"),
+  type: z120.literal("pcb_packing_error"),
   pcb_packing_error_id: getZodPrefixedIdWithDefault("pcb_packing_error"),
-  error_type: z119.literal("pcb_packing_error").default("pcb_packing_error"),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional()
+  error_type: z120.literal("pcb_packing_error").default("pcb_packing_error"),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional()
 }).describe("Defines a failure to pack PCB components within layout bounds");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panelization_placement_error.ts
-import { z as z120 } from "zod";
+import { z as z121 } from "zod";
 var pcb_panelization_placement_error = base_circuit_json_error.extend({
-  type: z120.literal("pcb_panelization_placement_error"),
+  type: z121.literal("pcb_panelization_placement_error"),
   pcb_panelization_placement_error_id: getZodPrefixedIdWithDefault(
     "pcb_panelization_placement_error"
   ),
-  error_type: z120.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
-  pcb_panel_id: z120.string().optional(),
-  pcb_board_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional()
+  error_type: z121.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
+  pcb_panel_id: z121.string().optional(),
+  pcb_board_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional()
 }).describe("Defines a panelization placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z121 } from "zod";
-var pcb_trace_hint = z121.object({
-  type: z121.literal("pcb_trace_hint"),
+import { z as z122 } from "zod";
+var pcb_trace_hint = z122.object({
+  type: z122.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z121.string(),
-  pcb_component_id: z121.string(),
-  route: z121.array(route_hint_point),
-  subcircuit_id: z121.string().optional()
+  pcb_port_id: z122.string(),
+  pcb_component_id: z122.string(),
+  route: z122.array(route_hint_point),
+  subcircuit_id: z122.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z122 } from "zod";
-var pcb_silkscreen_line = z122.object({
-  type: z122.literal("pcb_silkscreen_line"),
+import { z as z123 } from "zod";
+var pcb_silkscreen_line = z123.object({
+  type: z123.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z122.string(),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
+  pcb_component_id: z123.string(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -2569,32 +2616,32 @@ var pcb_silkscreen_line = z122.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z123 } from "zod";
-var pcb_silkscreen_path = z123.object({
-  type: z123.literal("pcb_silkscreen_path"),
+import { z as z124 } from "zod";
+var pcb_silkscreen_path = z124.object({
+  type: z124.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z123.string(),
-  pcb_group_id: z123.string().optional(),
-  subcircuit_id: z123.string().optional(),
+  pcb_component_id: z124.string(),
+  pcb_group_id: z124.string().optional(),
+  subcircuit_id: z124.string().optional(),
   layer: visible_layer,
-  route: z123.array(point),
+  route: z124.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z124 } from "zod";
-var pcb_silkscreen_text = z124.object({
-  type: z124.literal("pcb_silkscreen_text"),
+import { z as z125 } from "zod";
+var pcb_silkscreen_text = z125.object({
+  type: z125.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z124.string().optional(),
-  subcircuit_id: z124.string().optional(),
-  font: z124.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z125.string().optional(),
+  subcircuit_id: z125.string().optional(),
+  font: z125.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z124.string(),
-  text: z124.string(),
-  is_knockout: z124.boolean().default(false).optional(),
-  knockout_padding: z124.object({
+  pcb_component_id: z125.string(),
+  text: z125.string(),
+  is_knockout: z125.boolean().default(false).optional(),
+  knockout_padding: z125.object({
     left: length,
     top: length,
     bottom: length,
@@ -2605,27 +2652,27 @@ var pcb_silkscreen_text = z124.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z124.number().optional(),
+  ccw_rotation: z125.number().optional(),
   layer: layer_ref,
-  is_mirrored: z124.boolean().default(false).optional(),
+  is_mirrored: z125.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z125 } from "zod";
-var pcb_copper_text = z125.object({
-  type: z125.literal("pcb_copper_text"),
+import { z as z126 } from "zod";
+var pcb_copper_text = z126.object({
+  type: z126.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z125.string().optional(),
-  subcircuit_id: z125.string().optional(),
-  font: z125.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z126.string().optional(),
+  subcircuit_id: z126.string().optional(),
+  font: z126.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z125.string(),
-  text: z125.string(),
-  is_knockout: z125.boolean().default(false).optional(),
-  knockout_padding: z125.object({
+  pcb_component_id: z126.string(),
+  text: z126.string(),
+  is_knockout: z126.boolean().default(false).optional(),
+  knockout_padding: z126.object({
     left: length,
     top: length,
     bottom: length,
@@ -2636,61 +2683,61 @@ var pcb_copper_text = z125.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z125.number().optional(),
+  ccw_rotation: z126.number().optional(),
   layer: layer_ref,
-  is_mirrored: z125.boolean().default(false).optional(),
+  is_mirrored: z126.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z126 } from "zod";
-var pcb_silkscreen_rect = z126.object({
-  type: z126.literal("pcb_silkscreen_rect"),
+import { z as z127 } from "zod";
+var pcb_silkscreen_rect = z127.object({
+  type: z127.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z126.string(),
-  pcb_group_id: z126.string().optional(),
-  subcircuit_id: z126.string().optional(),
+  pcb_component_id: z127.string(),
+  pcb_group_id: z127.string().optional(),
+  subcircuit_id: z127.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z126.boolean().default(true).optional(),
-  has_stroke: z126.boolean().optional(),
-  is_stroke_dashed: z126.boolean().optional(),
-  ccw_rotation: z126.number().optional()
+  is_filled: z127.boolean().default(true).optional(),
+  has_stroke: z127.boolean().optional(),
+  is_stroke_dashed: z127.boolean().optional(),
+  ccw_rotation: z127.number().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z127 } from "zod";
-var pcb_silkscreen_circle = z127.object({
-  type: z127.literal("pcb_silkscreen_circle"),
+import { z as z128 } from "zod";
+var pcb_silkscreen_circle = z128.object({
+  type: z128.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z127.string(),
-  pcb_group_id: z127.string().optional(),
-  subcircuit_id: z127.string().optional(),
+  pcb_component_id: z128.string(),
+  pcb_group_id: z128.string().optional(),
+  subcircuit_id: z128.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm"),
-  is_filled: z127.boolean().optional()
+  is_filled: z128.boolean().optional()
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z128 } from "zod";
-var pcb_silkscreen_oval = z128.object({
-  type: z128.literal("pcb_silkscreen_oval"),
+import { z as z129 } from "zod";
+var pcb_silkscreen_oval = z129.object({
+  type: z129.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z128.string(),
-  pcb_group_id: z128.string().optional(),
-  subcircuit_id: z128.string().optional(),
+  pcb_component_id: z129.string(),
+  pcb_group_id: z129.string().optional(),
+  subcircuit_id: z129.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -2700,265 +2747,265 @@ var pcb_silkscreen_oval = z128.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_graphic.ts
-import { z as z129 } from "zod";
-var pcb_silkscreen_graphic_base = z129.object({
-  type: z129.literal("pcb_silkscreen_graphic"),
+import { z as z130 } from "zod";
+var pcb_silkscreen_graphic_base = z130.object({
+  type: z130.literal("pcb_silkscreen_graphic"),
   pcb_silkscreen_graphic_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_graphic"
   ),
-  pcb_component_id: z129.string(),
-  pcb_group_id: z129.string().optional(),
-  subcircuit_id: z129.string().optional(),
+  pcb_component_id: z130.string(),
+  pcb_group_id: z130.string().optional(),
+  subcircuit_id: z130.string().optional(),
   layer: visible_layer,
   image_asset: asset.optional()
 });
 var pcb_silkscreen_graphic_brep = pcb_silkscreen_graphic_base.extend({
-  shape: z129.literal("brep"),
+  shape: z130.literal("brep"),
   brep_shape
 }).describe("Defines a BRep silkscreen graphic on the PCB");
 expectTypesMatch(
   true
 );
-var pcb_silkscreen_graphic = z129.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
+var pcb_silkscreen_graphic = z130.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z130 } from "zod";
-var pcb_silkscreen_pill = z130.object({
-  type: z130.literal("pcb_silkscreen_pill"),
+import { z as z131 } from "zod";
+var pcb_silkscreen_pill = z131.object({
+  type: z131.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z130.string(),
-  pcb_group_id: z130.string().optional(),
-  subcircuit_id: z130.string().optional(),
+  pcb_component_id: z131.string(),
+  pcb_group_id: z131.string().optional(),
+  subcircuit_id: z131.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
-  ccw_rotation: z130.number().optional()
+  ccw_rotation: z131.number().optional()
 }).describe("Defines a silkscreen pill on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z131 } from "zod";
-var pcb_fabrication_note_text = z131.object({
-  type: z131.literal("pcb_fabrication_note_text"),
+import { z as z132 } from "zod";
+var pcb_fabrication_note_text = z132.object({
+  type: z132.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z131.string().optional(),
-  pcb_group_id: z131.string().optional(),
-  font: z131.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z132.string().optional(),
+  pcb_group_id: z132.string().optional(),
+  font: z132.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z131.string(),
-  text: z131.string(),
-  ccw_rotation: z131.number().optional(),
+  pcb_component_id: z132.string(),
+  text: z132.string(),
+  ccw_rotation: z132.number().optional(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z131.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z131.string().optional()
+  anchor_alignment: z132.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z132.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z132 } from "zod";
-var pcb_fabrication_note_path = z132.object({
-  type: z132.literal("pcb_fabrication_note_path"),
+import { z as z133 } from "zod";
+var pcb_fabrication_note_path = z133.object({
+  type: z133.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z132.string(),
-  subcircuit_id: z132.string().optional(),
+  pcb_component_id: z133.string(),
+  subcircuit_id: z133.string().optional(),
   layer: layer_ref,
-  route: z132.array(point),
+  route: z133.array(point),
   stroke_width: length,
-  color: z132.string().optional()
+  color: z133.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z133 } from "zod";
-var pcb_fabrication_note_rect = z133.object({
-  type: z133.literal("pcb_fabrication_note_rect"),
+import { z as z134 } from "zod";
+var pcb_fabrication_note_rect = z134.object({
+  type: z134.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z133.string(),
-  pcb_group_id: z133.string().optional(),
-  subcircuit_id: z133.string().optional(),
+  pcb_component_id: z134.string(),
+  pcb_group_id: z134.string().optional(),
+  subcircuit_id: z134.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z133.boolean().optional(),
-  has_stroke: z133.boolean().optional(),
-  is_stroke_dashed: z133.boolean().optional(),
-  color: z133.string().optional()
+  is_filled: z134.boolean().optional(),
+  has_stroke: z134.boolean().optional(),
+  is_stroke_dashed: z134.boolean().optional(),
+  color: z134.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z134 } from "zod";
-var pcb_fabrication_note_dimension = z134.object({
-  type: z134.literal("pcb_fabrication_note_dimension"),
+import { z as z135 } from "zod";
+var pcb_fabrication_note_dimension = z135.object({
+  type: z135.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z134.string(),
-  pcb_group_id: z134.string().optional(),
-  subcircuit_id: z134.string().optional(),
+  pcb_component_id: z135.string(),
+  pcb_group_id: z135.string().optional(),
+  subcircuit_id: z135.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z134.string().optional(),
-  text_ccw_rotation: z134.number().optional(),
+  text: z135.string().optional(),
+  text_ccw_rotation: z135.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z134.object({
-    x: z134.number(),
-    y: z134.number()
+  offset_direction: z135.object({
+    x: z135.number(),
+    y: z135.number()
   }).optional(),
-  font: z134.literal("tscircuit2024").default("tscircuit2024"),
+  font: z135.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z134.string().optional(),
+  color: z135.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z135 } from "zod";
-var pcb_note_text = z135.object({
-  type: z135.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z135.string().optional(),
-  pcb_group_id: z135.string().optional(),
-  subcircuit_id: z135.string().optional(),
-  name: z135.string().optional(),
-  font: z135.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z135.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z135.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  layer: visible_layer.default("top"),
-  is_mirrored_from_top_view: z135.boolean().optional(),
-  color: z135.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-
-// src/pcb/pcb_note_rect.ts
 import { z as z136 } from "zod";
-var pcb_note_rect = z136.object({
-  type: z136.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
+var pcb_note_text = z136.object({
+  type: z136.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
   pcb_component_id: z136.string().optional(),
   pcb_group_id: z136.string().optional(),
   subcircuit_id: z136.string().optional(),
   name: z136.string().optional(),
+  font: z136.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z136.string().optional(),
-  center: point,
-  width: length,
-  height: length,
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z136.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   layer: visible_layer.default("top"),
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z136.boolean().optional(),
-  has_stroke: z136.boolean().optional(),
-  is_stroke_dashed: z136.boolean().optional(),
+  is_mirrored_from_top_view: z136.boolean().optional(),
   color: z136.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_path.ts
+// src/pcb/pcb_note_rect.ts
 import { z as z137 } from "zod";
-var pcb_note_path = z137.object({
-  type: z137.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z137.object({
+  type: z137.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z137.string().optional(),
   pcb_group_id: z137.string().optional(),
   subcircuit_id: z137.string().optional(),
   name: z137.string().optional(),
   text: z137.string().optional(),
-  route: z137.array(point),
+  center: point,
+  width: length,
+  height: length,
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z137.boolean().optional(),
+  has_stroke: z137.boolean().optional(),
+  is_stroke_dashed: z137.boolean().optional(),
   color: z137.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_line.ts
+// src/pcb/pcb_note_path.ts
 import { z as z138 } from "zod";
-var pcb_note_line = z138.object({
-  type: z138.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z138.object({
+  type: z138.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z138.string().optional(),
   pcb_group_id: z138.string().optional(),
   subcircuit_id: z138.string().optional(),
   name: z138.string().optional(),
   text: z138.string().optional(),
+  route: z138.array(point),
+  layer: visible_layer.default("top"),
+  stroke_width: length.default("0.1mm"),
+  color: z138.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_line.ts
+import { z as z139 } from "zod";
+var pcb_note_line = z139.object({
+  type: z139.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z139.string().optional(),
+  pcb_group_id: z139.string().optional(),
+  subcircuit_id: z139.string().optional(),
+  name: z139.string().optional(),
+  text: z139.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   layer: visible_layer.default("top"),
   stroke_width: distance.default("0.1mm"),
-  color: z138.string().optional(),
-  is_dashed: z138.boolean().optional()
+  color: z139.string().optional(),
+  is_dashed: z139.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z139 } from "zod";
-var pcb_note_dimension = z139.object({
-  type: z139.literal("pcb_note_dimension"),
+import { z as z140 } from "zod";
+var pcb_note_dimension = z140.object({
+  type: z140.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z139.string().optional(),
-  pcb_group_id: z139.string().optional(),
-  subcircuit_id: z139.string().optional(),
-  name: z139.string().optional(),
+  pcb_component_id: z140.string().optional(),
+  pcb_group_id: z140.string().optional(),
+  subcircuit_id: z140.string().optional(),
+  name: z140.string().optional(),
   from: point,
   to: point,
-  text: z139.string().optional(),
-  text_ccw_rotation: z139.number().optional(),
+  text: z140.string().optional(),
+  text_ccw_rotation: z140.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z139.object({
-    x: z139.number(),
-    y: z139.number()
+  offset_direction: z140.object({
+    x: z140.number(),
+    y: z140.number()
   }).optional(),
-  font: z139.literal("tscircuit2024").default("tscircuit2024"),
+  font: z140.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
   layer: visible_layer.default("top"),
-  color: z139.string().optional(),
+  color: z140.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z140 } from "zod";
+import { z as z141 } from "zod";
 var pcb_footprint_overlap_error = base_circuit_json_error.extend({
-  type: z140.literal("pcb_footprint_overlap_error"),
+  type: z141.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z140.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  pcb_smtpad_ids: z140.array(z140.string()).optional(),
-  pcb_plated_hole_ids: z140.array(z140.string()).optional(),
-  pcb_hole_ids: z140.array(z140.string()).optional(),
-  pcb_keepout_ids: z140.array(z140.string()).optional()
+  error_type: z141.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  pcb_smtpad_ids: z141.array(z141.string()).optional(),
+  pcb_plated_hole_ids: z141.array(z141.string()).optional(),
+  pcb_hole_ids: z141.array(z141.string()).optional(),
+  pcb_keepout_ids: z141.array(z141.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_courtyard_overlap_error.ts
-import { z as z141 } from "zod";
+import { z as z142 } from "zod";
 var pcb_courtyard_overlap_error = base_circuit_json_error.extend({
-  type: z141.literal("pcb_courtyard_overlap_error"),
+  type: z142.literal("pcb_courtyard_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z141.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
-  pcb_component_ids: z141.tuple([z141.string(), z141.string()])
+  error_type: z142.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
+  pcb_component_ids: z142.tuple([z142.string(), z142.string()])
 }).describe(
   "Error emitted when the courtyard (CrtYd) of one PCB component overlaps with the courtyard of another"
 );
@@ -2967,51 +3014,51 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z142 } from "zod";
-var pcb_keepout = z142.object({
-  type: z142.literal("pcb_keepout"),
-  shape: z142.literal("rect"),
-  pcb_group_id: z142.string().optional(),
-  subcircuit_id: z142.string().optional(),
+import { z as z143 } from "zod";
+var pcb_keepout = z143.object({
+  type: z143.literal("pcb_keepout"),
+  shape: z143.literal("rect"),
+  pcb_group_id: z143.string().optional(),
+  subcircuit_id: z143.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z142.string(),
-  layers: z142.array(z142.string()),
+  pcb_keepout_id: z143.string(),
+  layers: z143.array(z143.string()),
   // Specify layers where the keepout applies
-  description: z142.string().optional(),
+  description: z143.string().optional(),
   // Optional description of the keepout
-  excluded_pcb_component_ids: z142.array(z142.string()).optional()
+  excluded_pcb_component_ids: z143.array(z143.string()).optional()
 }).or(
-  z142.object({
-    type: z142.literal("pcb_keepout"),
-    shape: z142.literal("circle"),
-    pcb_group_id: z142.string().optional(),
-    subcircuit_id: z142.string().optional(),
+  z143.object({
+    type: z143.literal("pcb_keepout"),
+    shape: z143.literal("circle"),
+    pcb_group_id: z143.string().optional(),
+    subcircuit_id: z143.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z142.string(),
-    layers: z142.array(z142.string()),
+    pcb_keepout_id: z143.string(),
+    layers: z143.array(z143.string()),
     // Specify layers where the keepout applies
-    description: z142.string().optional(),
+    description: z143.string().optional(),
     // Optional description of the keepout
-    excluded_pcb_component_ids: z142.array(z142.string()).optional()
+    excluded_pcb_component_ids: z143.array(z143.string()).optional()
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z143 } from "zod";
-var pcb_cutout_base = z143.object({
-  type: z143.literal("pcb_cutout"),
+import { z as z144 } from "zod";
+var pcb_cutout_base = z144.object({
+  type: z144.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z143.string().optional(),
-  subcircuit_id: z143.string().optional(),
-  pcb_board_id: z143.string().optional(),
-  pcb_panel_id: z143.string().optional()
+  pcb_group_id: z144.string().optional(),
+  subcircuit_id: z144.string().optional(),
+  pcb_board_id: z144.string().optional(),
+  pcb_panel_id: z144.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z143.literal("rect"),
+  shape: z144.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3020,26 +3067,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z143.literal("circle"),
+  shape: z144.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z143.literal("polygon"),
-  points: z143.array(point)
+  shape: z144.literal("polygon"),
+  points: z144.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z143.literal("path"),
-  route: z143.array(point),
+  shape: z144.literal("path"),
+  route: z144.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z143.discriminatedUnion("shape", [
+var pcb_cutout = z144.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3048,169 +3095,169 @@ var pcb_cutout = z143.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z144 } from "zod";
+import { z as z145 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z144.literal("pcb_missing_footprint_error"),
+  type: z145.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z144.string().optional(),
-  subcircuit_id: z144.string().optional(),
-  error_type: z144.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z144.string()
+  pcb_group_id: z145.string().optional(),
+  subcircuit_id: z145.string().optional(),
+  error_type: z145.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z145.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z145 } from "zod";
+import { z as z146 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z145.literal("external_footprint_load_error"),
+  type: z146.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z145.string(),
-  source_component_id: z145.string(),
-  pcb_group_id: z145.string().optional(),
-  subcircuit_id: z145.string().optional(),
-  footprinter_string: z145.string().optional(),
-  error_type: z145.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z146.string(),
+  source_component_id: z146.string(),
+  pcb_group_id: z146.string().optional(),
+  subcircuit_id: z146.string().optional(),
+  footprinter_string: z146.string().optional(),
+  error_type: z146.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z146 } from "zod";
+import { z as z147 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z146.literal("circuit_json_footprint_load_error"),
+  type: z147.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z146.string(),
-  source_component_id: z146.string(),
-  pcb_group_id: z146.string().optional(),
-  subcircuit_id: z146.string().optional(),
-  error_type: z146.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z146.array(z146.any()).optional()
+  pcb_component_id: z147.string(),
+  source_component_id: z147.string(),
+  pcb_group_id: z147.string().optional(),
+  subcircuit_id: z147.string().optional(),
+  error_type: z147.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z147.array(z147.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z147 } from "zod";
-var pcb_group = z147.object({
-  type: z147.literal("pcb_group"),
+import { z as z148 } from "zod";
+var pcb_group = z148.object({
+  type: z148.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z147.string(),
-  is_subcircuit: z147.boolean().optional(),
-  subcircuit_id: z147.string().optional(),
+  source_group_id: z148.string(),
+  is_subcircuit: z148.boolean().optional(),
+  subcircuit_id: z148.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z147.string().optional().describe(
+  display_offset_x: z148.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z147.string().optional().describe(
+  display_offset_y: z148.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z147.array(point).optional(),
+  outline: z148.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z147.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z147.string().optional(),
-  positioned_relative_to_pcb_board_id: z147.string().optional(),
-  pcb_component_ids: z147.array(z147.string()),
-  child_layout_mode: z147.enum(["packed", "none"]).optional(),
-  name: z147.string().optional(),
-  description: z147.string().optional(),
-  layout_mode: z147.string().optional(),
-  autorouter_configuration: z147.object({
+  position_mode: z148.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z148.string().optional(),
+  positioned_relative_to_pcb_board_id: z148.string().optional(),
+  pcb_component_ids: z148.array(z148.string()),
+  child_layout_mode: z148.enum(["packed", "none"]).optional(),
+  name: z148.string().optional(),
+  description: z148.string().optional(),
+  layout_mode: z148.string().optional(),
+  autorouter_configuration: z148.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z147.string().optional()
+  autorouter_used_string: z148.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z148 } from "zod";
+import { z as z149 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z148.literal("pcb_autorouting_error"),
+  type: z149.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z148.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z148.string().optional()
+  error_type: z149.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z149.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z149 } from "zod";
-var pcb_manual_edit_conflict_warning = z149.object({
-  type: z149.literal("pcb_manual_edit_conflict_warning"),
+import { z as z150 } from "zod";
+var pcb_manual_edit_conflict_warning = z150.object({
+  type: z150.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z149.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z149.string(),
-  pcb_component_id: z149.string(),
-  pcb_group_id: z149.string().optional(),
-  subcircuit_id: z149.string().optional(),
-  source_component_id: z149.string()
+  warning_type: z150.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z150.string(),
+  pcb_component_id: z150.string(),
+  pcb_group_id: z150.string().optional(),
+  subcircuit_id: z150.string().optional(),
+  source_component_id: z150.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z150 } from "zod";
-var connectorOrientationDirection = z150.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z150.object({
-  type: z150.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z151 } from "zod";
+var connectorOrientationDirection = z151.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z151.object({
+  type: z151.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z150.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z150.string(),
-  pcb_component_id: z150.string(),
-  source_component_id: z150.string().optional(),
-  pcb_board_id: z150.string().optional(),
+  warning_type: z151.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z151.string(),
+  pcb_component_id: z151.string(),
+  source_component_id: z151.string().optional(),
+  pcb_board_id: z151.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z150.string().optional()
+  subcircuit_id: z151.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z151 } from "zod";
-var supplier_footprint_mismatch_warning = z151.object({
-  type: z151.literal("supplier_footprint_mismatch_warning"),
+import { z as z152 } from "zod";
+var supplier_footprint_mismatch_warning = z152.object({
+  type: z152.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z151.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z151.string(),
-  source_component_id: z151.string(),
-  pcb_component_id: z151.string().optional(),
-  pcb_group_id: z151.string().optional(),
-  subcircuit_id: z151.string().optional(),
+  warning_type: z152.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z152.string(),
+  source_component_id: z152.string(),
+  pcb_component_id: z152.string().optional(),
+  pcb_group_id: z152.string().optional(),
+  subcircuit_id: z152.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z151.string().optional(),
-  supplier_footprint_url: z151.string().optional(),
-  footprint_copper_intersection_over_union: z151.number()
+  supplier_part_number: z152.string().optional(),
+  supplier_footprint_url: z152.string().optional(),
+  footprint_copper_intersection_over_union: z152.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z152 } from "zod";
-var pcb_breakout_point = z152.object({
-  type: z152.literal("pcb_breakout_point"),
+import { z as z153 } from "zod";
+var pcb_breakout_point = z153.object({
+  type: z153.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z152.string(),
-  subcircuit_id: z152.string().optional(),
-  source_trace_id: z152.string().optional(),
-  source_port_id: z152.string().optional(),
-  source_net_id: z152.string().optional(),
+  pcb_group_id: z153.string(),
+  subcircuit_id: z153.string().optional(),
+  source_trace_id: z153.string().optional(),
+  source_port_id: z153.string().optional(),
+  source_net_id: z153.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -3219,61 +3266,61 @@ var pcb_breakout_point = z152.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z153 } from "zod";
-var pcb_ground_plane = z153.object({
-  type: z153.literal("pcb_ground_plane"),
+import { z as z154 } from "zod";
+var pcb_ground_plane = z154.object({
+  type: z154.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z153.string(),
-  source_net_id: z153.string(),
-  pcb_group_id: z153.string().optional(),
-  subcircuit_id: z153.string().optional()
+  source_pcb_ground_plane_id: z154.string(),
+  source_net_id: z154.string(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z154 } from "zod";
-var pcb_ground_plane_region = z154.object({
-  type: z154.literal("pcb_ground_plane_region"),
+import { z as z155 } from "zod";
+var pcb_ground_plane_region = z155.object({
+  type: z155.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z154.string(),
-  pcb_group_id: z154.string().optional(),
-  subcircuit_id: z154.string().optional(),
+  pcb_ground_plane_id: z155.string(),
+  pcb_group_id: z155.string().optional(),
+  subcircuit_id: z155.string().optional(),
   layer: layer_ref,
-  points: z154.array(point)
+  points: z155.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z155 } from "zod";
-var pcb_thermal_spoke = z155.object({
-  type: z155.literal("pcb_thermal_spoke"),
+import { z as z156 } from "zod";
+var pcb_thermal_spoke = z156.object({
+  type: z156.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z155.string(),
-  shape: z155.string(),
-  spoke_count: z155.number(),
+  pcb_ground_plane_id: z156.string(),
+  shape: z156.string(),
+  spoke_count: z156.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z155.string().optional(),
-  subcircuit_id: z155.string().optional()
+  pcb_plated_hole_id: z156.string().optional(),
+  subcircuit_id: z156.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z156 } from "zod";
-var pcb_copper_pour_base = z156.object({
-  type: z156.literal("pcb_copper_pour"),
+import { z as z157 } from "zod";
+var pcb_copper_pour_base = z157.object({
+  type: z157.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z156.string().optional(),
-  subcircuit_id: z156.string().optional(),
+  pcb_group_id: z157.string().optional(),
+  subcircuit_id: z157.string().optional(),
   layer: layer_ref,
-  source_net_id: z156.string().optional(),
-  covered_with_solder_mask: z156.boolean().optional().default(true)
+  source_net_id: z157.string().optional(),
+  covered_with_solder_mask: z157.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z156.literal("rect"),
+  shape: z157.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3281,16 +3328,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z156.literal("brep"),
+  shape: z157.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z156.literal("polygon"),
-  points: z156.array(point)
+  shape: z157.literal("polygon"),
+  points: z157.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z156.discriminatedUnion("shape", [
+var pcb_copper_pour = z157.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -3298,99 +3345,99 @@ var pcb_copper_pour = z156.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z157 } from "zod";
+import { z as z158 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z157.literal("pcb_component_outside_board_error"),
+  type: z158.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z157.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z157.string(),
-  pcb_board_id: z157.string(),
+  error_type: z158.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z158.string(),
+  pcb_board_id: z158.string(),
   component_center: point,
-  component_bounds: z157.object({
-    min_x: z157.number(),
-    max_x: z157.number(),
-    min_y: z157.number(),
-    max_y: z157.number()
+  component_bounds: z158.object({
+    min_x: z158.number(),
+    max_x: z158.number(),
+    min_y: z158.number(),
+    max_y: z158.number()
   }),
-  subcircuit_id: z157.string().optional(),
-  source_component_id: z157.string().optional()
+  subcircuit_id: z158.string().optional(),
+  source_component_id: z158.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z158 } from "zod";
+import { z as z159 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z158.literal("pcb_component_not_on_board_edge_error"),
+  type: z159.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z158.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z158.string(),
-  pcb_board_id: z158.string(),
+  error_type: z159.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z159.string(),
+  pcb_board_id: z159.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z158.number(),
-  source_component_id: z158.string().optional(),
-  subcircuit_id: z158.string().optional()
+  pad_to_nearest_board_edge_distance: z159.number(),
+  source_component_id: z159.string().optional(),
+  subcircuit_id: z159.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z159 } from "zod";
+import { z as z160 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z159.literal("pcb_component_invalid_layer_error"),
+  type: z160.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z159.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z159.string().optional(),
-  source_component_id: z159.string(),
+  error_type: z160.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z160.string().optional(),
+  source_component_id: z160.string(),
   layer: layer_ref,
-  subcircuit_id: z159.string().optional()
+  subcircuit_id: z160.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z160 } from "zod";
+import { z as z161 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z160.literal("pcb_via_clearance_error"),
+  type: z161.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z160.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z160.array(z160.string()).min(2),
+  error_type: z161.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z161.array(z161.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z160.object({
-    x: z160.number().optional(),
-    y: z160.number().optional()
+  pcb_center: z161.object({
+    x: z161.number().optional(),
+    y: z161.number().optional()
   }).optional(),
-  subcircuit_id: z160.string().optional()
+  subcircuit_id: z161.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z161 } from "zod";
+import { z as z162 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z161.literal("pcb_via_trace_clearance_error"),
+  type: z162.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z161.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z161.string(),
-  pcb_trace_id: z161.string(),
+  error_type: z162.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z162.string(),
+  pcb_trace_id: z162.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z161.object({
-    x: z161.number().optional(),
-    y: z161.number().optional()
+  center: z162.object({
+    x: z162.number().optional(),
+    y: z162.number().optional()
   }).optional(),
-  subcircuit_id: z161.string().optional()
+  subcircuit_id: z162.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -3399,41 +3446,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z162 } from "zod";
+import { z as z163 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z162.literal("pcb_pad_pad_clearance_error"),
+  type: z163.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z162.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z162.array(z162.string()).min(2),
+  error_type: z163.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z163.array(z163.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z162.object({
-    x: z162.number().optional(),
-    y: z162.number().optional()
+  center: z163.object({
+    x: z163.number().optional(),
+    y: z163.number().optional()
   }).optional(),
-  subcircuit_id: z162.string().optional()
+  subcircuit_id: z163.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z163 } from "zod";
+import { z as z164 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z163.literal("pcb_pad_trace_clearance_error"),
+  type: z164.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z163.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z163.string(),
-  pcb_trace_id: z163.string(),
+  error_type: z164.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z164.string(),
+  pcb_trace_id: z164.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z163.object({
-    x: z163.number().optional(),
-    y: z163.number().optional()
+  center: z164.object({
+    x: z164.number().optional(),
+    y: z164.number().optional()
   }).optional(),
-  subcircuit_id: z163.string().optional()
+  subcircuit_id: z164.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -3442,89 +3489,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z164 } from "zod";
-var pcb_courtyard_rect = z164.object({
-  type: z164.literal("pcb_courtyard_rect"),
+import { z as z165 } from "zod";
+var pcb_courtyard_rect = z165.object({
+  type: z165.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z164.string(),
-  pcb_group_id: z164.string().optional(),
-  subcircuit_id: z164.string().optional(),
+  pcb_component_id: z165.string(),
+  pcb_group_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z164.string().optional()
+  color: z165.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z165 } from "zod";
-var pcb_courtyard_outline = z165.object({
-  type: z165.literal("pcb_courtyard_outline"),
+import { z as z166 } from "zod";
+var pcb_courtyard_outline = z166.object({
+  type: z166.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z165.string(),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
+  pcb_component_id: z166.string(),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
   layer: visible_layer,
-  outline: z165.array(point).min(2)
+  outline: z166.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z166 } from "zod";
-var pcb_courtyard_polygon = z166.object({
-  type: z166.literal("pcb_courtyard_polygon"),
+import { z as z167 } from "zod";
+var pcb_courtyard_polygon = z167.object({
+  type: z167.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z166.string(),
-  pcb_group_id: z166.string().optional(),
-  subcircuit_id: z166.string().optional(),
+  pcb_component_id: z167.string(),
+  pcb_group_id: z167.string().optional(),
+  subcircuit_id: z167.string().optional(),
   layer: visible_layer,
-  points: z166.array(point).min(3),
-  color: z166.string().optional()
+  points: z167.array(point).min(3),
+  color: z167.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z167 } from "zod";
-var pcb_courtyard_circle = z167.object({
-  type: z167.literal("pcb_courtyard_circle"),
+import { z as z168 } from "zod";
+var pcb_courtyard_circle = z168.object({
+  type: z168.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z167.string(),
-  pcb_group_id: z167.string().optional(),
-  subcircuit_id: z167.string().optional(),
+  pcb_component_id: z168.string(),
+  pcb_group_id: z168.string().optional(),
+  subcircuit_id: z168.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z167.string().optional()
+  color: z168.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z168 } from "zod";
-var pcb_courtyard_pill = z168.object({
-  type: z168.literal("pcb_courtyard_pill"),
+import { z as z169 } from "zod";
+var pcb_courtyard_pill = z169.object({
+  type: z169.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z168.string(),
-  pcb_group_id: z168.string().optional(),
-  subcircuit_id: z168.string().optional(),
+  pcb_component_id: z169.string(),
+  pcb_group_id: z169.string().optional(),
+  subcircuit_id: z169.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z168.string().optional()
+  color: z169.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z169 } from "zod";
+import { z as z170 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -3555,49 +3602,49 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z169.object({
-  type: z169.literal("cad_component"),
-  cad_component_id: z169.string(),
-  pcb_component_id: z169.string(),
-  source_component_id: z169.string(),
+var cad_component = z170.object({
+  type: z170.literal("cad_component"),
+  cad_component_id: z170.string(),
+  pcb_component_id: z170.string(),
+  source_component_id: z170.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z169.string().optional(),
+  subcircuit_id: z170.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z169.string().optional(),
-  model_obj_url: z169.string().optional(),
-  model_stl_url: z169.string().optional(),
-  model_3mf_url: z169.string().optional(),
-  model_gltf_url: z169.string().optional(),
-  model_glb_url: z169.string().optional(),
-  model_step_url: z169.string().optional(),
-  model_wrl_url: z169.string().optional(),
+  footprinter_string: z170.string().optional(),
+  model_obj_url: z170.string().optional(),
+  model_stl_url: z170.string().optional(),
+  model_3mf_url: z170.string().optional(),
+  model_gltf_url: z170.string().optional(),
+  model_glb_url: z170.string().optional(),
+  model_step_url: z170.string().optional(),
+  model_wrl_url: z170.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z169.number().optional(),
-  model_board_normal_direction: z169.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z170.number().optional(),
+  model_board_normal_direction: z170.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z169.enum([
+  model_origin_alignment: z170.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z169.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z169.any().optional(),
-  show_as_translucent_model: z169.boolean().optional(),
-  show_as_bounding_box: z169.boolean().optional(),
-  anchor_alignment: z169.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z170.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z170.any().optional(),
+  show_as_translucent_model: z170.boolean().optional(),
+  show_as_bounding_box: z170.boolean().optional(),
+  anchor_alignment: z170.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z170 } from "zod";
-var wave_shape = z170.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z170.union([z170.string(), z170.number()]).transform((val) => {
+import { z as z171 } from "zod";
+var wave_shape = z171.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z171.union([z171.string(), z171.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3606,32 +3653,32 @@ var percentage = z170.union([z170.string(), z170.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z170.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z171.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z170.object({
-  type: z170.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z171.object({
+  type: z171.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z170.literal(true).optional().default(true),
-  positive_source_port_id: z170.string().optional(),
-  negative_source_port_id: z170.string().optional(),
-  positive_source_net_id: z170.string().optional(),
-  negative_source_net_id: z170.string().optional(),
+  is_dc_source: z171.literal(true).optional().default(true),
+  positive_source_port_id: z171.string().optional(),
+  negative_source_port_id: z171.string().optional(),
+  positive_source_net_id: z171.string().optional(),
+  negative_source_net_id: z171.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z170.object({
-  type: z170.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z171.object({
+  type: z171.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z170.literal(false),
-  terminal1_source_port_id: z170.string().optional(),
-  terminal2_source_port_id: z170.string().optional(),
-  terminal1_source_net_id: z170.string().optional(),
-  terminal2_source_net_id: z170.string().optional(),
+  is_dc_source: z171.literal(false),
+  terminal1_source_port_id: z171.string().optional(),
+  terminal2_source_port_id: z171.string().optional(),
+  terminal1_source_net_id: z171.string().optional(),
+  terminal2_source_net_id: z171.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -3646,14 +3693,14 @@ var simulation_ac_voltage_source = z170.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z170.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z171.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z171 } from "zod";
-var percentage2 = z171.union([z171.string(), z171.number()]).transform((val) => {
+import { z as z172 } from "zod";
+var percentage2 = z172.union([z172.string(), z172.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3662,32 +3709,32 @@ var percentage2 = z171.union([z171.string(), z171.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z171.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z172.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z171.object({
-  type: z171.literal("simulation_current_source"),
+var simulation_dc_current_source = z172.object({
+  type: z172.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z171.literal(true).optional().default(true),
-  positive_source_port_id: z171.string().optional(),
-  negative_source_port_id: z171.string().optional(),
-  positive_source_net_id: z171.string().optional(),
-  negative_source_net_id: z171.string().optional(),
+  is_dc_source: z172.literal(true).optional().default(true),
+  positive_source_port_id: z172.string().optional(),
+  negative_source_port_id: z172.string().optional(),
+  positive_source_net_id: z172.string().optional(),
+  negative_source_net_id: z172.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z171.object({
-  type: z171.literal("simulation_current_source"),
+var simulation_ac_current_source = z172.object({
+  type: z172.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z171.literal(false),
-  terminal1_source_port_id: z171.string().optional(),
-  terminal2_source_port_id: z171.string().optional(),
-  terminal1_source_net_id: z171.string().optional(),
-  terminal2_source_net_id: z171.string().optional(),
+  is_dc_source: z172.literal(false),
+  terminal1_source_port_id: z172.string().optional(),
+  terminal2_source_port_id: z172.string().optional(),
+  terminal1_source_net_id: z172.string().optional(),
+  terminal2_source_net_id: z172.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -3697,58 +3744,58 @@ var simulation_ac_current_source = z171.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z171.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z172.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z173 } from "zod";
+import { z as z174 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z172 } from "zod";
-var simulation_dc_sweep_unit = z172.custom(
+import { z as z173 } from "zod";
+var simulation_dc_sweep_unit = z173.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z172.custom(
+var simulation_parameter_unit = z173.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z173.union([
-  z173.literal("spice_dc_sweep"),
-  z173.literal("spice_dc_operating_point"),
-  z173.literal("spice_transient_analysis"),
-  z173.literal("spice_ac_analysis")
+var experiment_type = z174.union([
+  z174.literal("spice_dc_sweep"),
+  z174.literal("spice_dc_operating_point"),
+  z174.literal("spice_transient_analysis"),
+  z174.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z173.object({
-  method: z173.enum(["trap", "gear"]).optional(),
-  reltol: z173.union([z173.number(), z173.string()]).optional(),
-  abstol: z173.union([z173.number(), z173.string()]).optional(),
-  vntol: z173.union([z173.number(), z173.string()]).optional()
+var spice_simulation_options = z174.object({
+  method: z174.enum(["trap", "gear"]).optional(),
+  reltol: z174.union([z174.number(), z174.string()]).optional(),
+  abstol: z174.union([z174.number(), z174.string()]).optional(),
+  vntol: z174.union([z174.number(), z174.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z173.object({
-  type: z173.literal("simulation_experiment"),
+var simulation_experiment = z174.object({
+  type: z174.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z173.string(),
+  name: z174.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z173.string().optional(),
-  dc_sweep_current_source_id: z173.string().optional(),
-  dc_sweep_start: z173.number().optional(),
-  dc_sweep_stop: z173.number().optional(),
-  dc_sweep_step: z173.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z174.string().optional(),
+  dc_sweep_current_source_id: z174.string().optional(),
+  dc_sweep_start: z174.number().optional(),
+  dc_sweep_stop: z174.number().optional(),
+  dc_sweep_step: z174.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z173.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z173.number().int().positive().optional(),
-  ac_sample_count: z173.number().int().positive().optional(),
-  ac_start_frequency_hz: z173.number().positive().optional(),
-  ac_stop_frequency_hz: z173.number().positive().optional()
+  ac_sweep_type: z174.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z174.number().int().positive().optional(),
+  ac_sample_count: z174.number().int().positive().optional(),
+  ac_start_frequency_hz: z174.number().positive().optional(),
+  ac_stop_frequency_hz: z174.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -3760,7 +3807,7 @@ var simulation_experiment = z173.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z173.ZodIssueCode.custom,
+          code: z174.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -3770,7 +3817,7 @@ var simulation_experiment = z173.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -3779,35 +3826,35 @@ var simulation_experiment = z173.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z173.ZodIssueCode.custom,
+        code: z174.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -3817,87 +3864,87 @@ var simulation_experiment = z173.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z175 } from "zod";
+import { z as z176 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z174 } from "zod";
-var simulation_parameter_sweep_coordinate = z174.object({
-  simulation_parameter_sweep_id: z174.string(),
-  sweep_index: z174.number().int().nonnegative(),
-  parameter_value: z174.number(),
+import { z as z175 } from "zod";
+var simulation_parameter_sweep_coordinate = z175.object({
+  simulation_parameter_sweep_id: z175.string(),
+  sweep_index: z175.number().int().nonnegative(),
+  parameter_value: z175.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z175.object({
-  type: z175.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z176.object({
+  type: z176.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z175.string(),
+  simulation_experiment_id: z176.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z175.array(z175.number()).optional(),
-  voltage_levels: z175.array(z175.number()),
-  source_component_id: z175.string().optional(),
-  subcircuit_connectivity_map_key: z175.string().optional(),
+  timestamps_ms: z176.array(z176.number()).optional(),
+  voltage_levels: z176.array(z176.number()),
+  source_component_id: z176.string().optional(),
+  subcircuit_connectivity_map_key: z176.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z175.string().optional(),
-  color: z175.string().optional()
+  name: z176.string().optional(),
+  color: z176.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z176 } from "zod";
-var simulation_transient_current_graph = z176.object({
-  type: z176.literal("simulation_transient_current_graph"),
+import { z as z177 } from "zod";
+var simulation_transient_current_graph = z177.object({
+  type: z177.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z176.string(),
+  simulation_experiment_id: z177.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z176.array(z176.number()).optional(),
-  current_levels: z176.array(z176.number()),
-  source_component_id: z176.string().optional(),
-  subcircuit_connectivity_map_key: z176.string().optional(),
+  timestamps_ms: z177.array(z177.number()).optional(),
+  current_levels: z177.array(z177.number()),
+  source_component_id: z177.string().optional(),
+  subcircuit_connectivity_map_key: z177.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z176.string().optional(),
-  color: z176.string().optional()
+  name: z177.string().optional(),
+  color: z177.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z177 } from "zod";
-var simulation_switch = z177.object({
-  type: z177.literal("simulation_switch"),
+import { z as z178 } from "zod";
+var simulation_switch = z178.object({
+  type: z178.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z177.string().optional(),
+  source_component_id: z178.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z177.boolean().optional(),
+  starts_closed: z178.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z178 } from "zod";
-var simulation_voltage_probe = z178.object({
-  type: z178.literal("simulation_voltage_probe"),
+import { z as z179 } from "zod";
+var simulation_voltage_probe = z179.object({
+  type: z179.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z178.string().optional(),
-  name: z178.string().optional(),
-  signal_input_source_port_id: z178.string().optional(),
-  signal_input_source_net_id: z178.string().optional(),
-  reference_input_source_port_id: z178.string().optional(),
-  reference_input_source_net_id: z178.string().optional(),
-  subcircuit_id: z178.string().optional(),
-  color: z178.string().optional()
+  source_component_id: z179.string().optional(),
+  name: z179.string().optional(),
+  signal_input_source_port_id: z179.string().optional(),
+  signal_input_source_net_id: z179.string().optional(),
+  reference_input_source_port_id: z179.string().optional(),
+  reference_input_source_net_id: z179.string().optional(),
+  subcircuit_id: z179.string().optional(),
+  color: z179.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -3907,20 +3954,20 @@ var simulation_voltage_probe = z178.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z178.ZodIssueCode.custom,
+        code: z179.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z178.ZodIssueCode.custom,
+          code: z179.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z178.ZodIssueCode.custom,
+          code: z179.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -3928,7 +3975,7 @@ var simulation_voltage_probe = z178.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z178.ZodIssueCode.custom,
+        code: z179.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -3937,20 +3984,20 @@ var simulation_voltage_probe = z178.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z179 } from "zod";
-var simulation_current_probe = z179.object({
-  type: z179.literal("simulation_current_probe"),
+import { z as z180 } from "zod";
+var simulation_current_probe = z180.object({
+  type: z180.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z179.string().optional(),
-  name: z179.string().optional(),
-  positive_source_port_id: z179.string().optional(),
-  negative_source_port_id: z179.string().optional(),
-  positive_source_net_id: z179.string().optional(),
-  negative_source_net_id: z179.string().optional(),
-  subcircuit_id: z179.string().optional(),
-  color: z179.string().optional()
+  source_component_id: z180.string().optional(),
+  name: z180.string().optional(),
+  positive_source_port_id: z180.string().optional(),
+  negative_source_port_id: z180.string().optional(),
+  positive_source_net_id: z180.string().optional(),
+  negative_source_net_id: z180.string().optional(),
+  subcircuit_id: z180.string().optional(),
+  color: z180.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -3962,7 +4009,7 @@ var simulation_current_probe = z179.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z179.ZodIssueCode.custom,
+      code: z180.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -3970,7 +4017,7 @@ var simulation_current_probe = z179.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z179.ZodIssueCode.custom,
+        code: z180.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -3979,71 +4026,71 @@ var simulation_current_probe = z179.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z179.ZodIssueCode.custom,
+        code: z180.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z179.ZodIssueCode.custom,
+    code: z180.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z180 } from "zod";
+import { z as z181 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z180.literal("simulation_unknown_experiment_error"),
+  type: z181.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z180.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z180.string().optional(),
-  subcircuit_id: z180.string().optional()
+  error_type: z181.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z181.string().optional(),
+  subcircuit_id: z181.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z181 } from "zod";
-var simulation_parameter_type = z181.enum([
+import { z as z182 } from "zod";
+var simulation_parameter_type = z182.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z181.object({
-  type: z181.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z182.object({
+  type: z182.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z181.string(),
-  name: z181.string().optional(),
-  parameter_values: z181.array(z181.number()).min(1),
+  simulation_experiment_id: z182.string(),
+  name: z182.string().optional(),
+  parameter_values: z182.array(z182.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z181.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z182.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z181.literal("resistance"),
-    resistor_source_component_id: z181.string()
+    parameter_type: z182.literal("resistance"),
+    resistor_source_component_id: z182.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z181.literal("capacitance"),
-    capacitor_source_component_id: z181.string()
+    parameter_type: z182.literal("capacitance"),
+    capacitor_source_component_id: z182.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z181.literal("inductance"),
-    inductor_source_component_id: z181.string()
+    parameter_type: z182.literal("inductance"),
+    inductor_source_component_id: z182.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z181.literal("voltage"),
-    source_net_id: z181.string()
+    parameter_type: z182.literal("voltage"),
+    source_net_id: z182.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z181.literal("current"),
-    current_source_component_id: z181.string()
+    parameter_type: z182.literal("current"),
+    current_source_component_id: z182.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4051,52 +4098,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z182 } from "zod";
-var simulation_dc_operating_point_voltage = z182.object({
-  type: z182.literal("simulation_dc_operating_point_voltage"),
+import { z as z183 } from "zod";
+var simulation_dc_operating_point_voltage = z183.object({
+  type: z183.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z182.string(),
+  simulation_experiment_id: z183.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z182.string(),
-  voltage: z182.number(),
-  name: z182.string().optional(),
-  color: z182.string().optional()
+  simulation_voltage_probe_id: z183.string(),
+  voltage: z183.number(),
+  name: z183.string().optional(),
+  color: z183.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z183 } from "zod";
-var simulation_dc_operating_point_current = z183.object({
-  type: z183.literal("simulation_dc_operating_point_current"),
+import { z as z184 } from "zod";
+var simulation_dc_operating_point_current = z184.object({
+  type: z184.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z183.string(),
+  simulation_experiment_id: z184.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z183.string(),
-  current: z183.number(),
-  name: z183.string().optional(),
-  color: z183.string().optional()
+  simulation_current_probe_id: z184.string(),
+  current: z184.number(),
+  name: z184.string().optional(),
+  color: z184.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z184 } from "zod";
-var simulation_dc_sweep_voltage_graph = z184.object({
-  type: z184.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z185 } from "zod";
+var simulation_dc_sweep_voltage_graph = z185.object({
+  type: z185.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z184.string(),
+  simulation_experiment_id: z185.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z184.string(),
-  sweep_values: z184.array(z184.number()),
+  simulation_voltage_probe_id: z185.string(),
+  sweep_values: z185.array(z185.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z184.array(z184.number()),
-  name: z184.string().optional(),
-  color: z184.string().optional()
+  voltage_levels: z185.array(z185.number()),
+  name: z185.string().optional(),
+  color: z185.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4106,20 +4153,20 @@ var simulation_dc_sweep_voltage_graph = z184.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z185 } from "zod";
-var simulation_dc_sweep_current_graph = z185.object({
-  type: z185.literal("simulation_dc_sweep_current_graph"),
+import { z as z186 } from "zod";
+var simulation_dc_sweep_current_graph = z186.object({
+  type: z186.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z185.string(),
+  simulation_experiment_id: z186.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z185.string(),
-  sweep_values: z185.array(z185.number()),
+  simulation_current_probe_id: z186.string(),
+  sweep_values: z186.array(z186.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z185.array(z185.number()),
-  name: z185.string().optional(),
-  color: z185.string().optional()
+  current_levels: z186.array(z186.number()),
+  name: z186.string().optional(),
+  color: z186.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4129,29 +4176,29 @@ var simulation_dc_sweep_current_graph = z185.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z187 } from "zod";
+import { z as z188 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z186 } from "zod";
-var simulation_complex_sample = z186.object({
-  re: z186.number(),
-  im: z186.number()
+import { z as z187 } from "zod";
+var simulation_complex_sample = z187.object({
+  re: z187.number(),
+  im: z187.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z187.object({
-  type: z187.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z188.object({
+  type: z188.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z187.string(),
+  simulation_experiment_id: z188.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z187.string(),
-  frequencies_hz: z187.array(z187.number()),
-  complex_voltages: z187.array(simulation_complex_sample),
-  name: z187.string().optional(),
-  color: z187.string().optional()
+  simulation_voltage_probe_id: z188.string(),
+  frequencies_hz: z188.array(z188.number()),
+  complex_voltages: z188.array(simulation_complex_sample),
+  name: z188.string().optional(),
+  color: z188.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4161,19 +4208,19 @@ var simulation_ac_sweep_voltage_graph = z187.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z188 } from "zod";
-var simulation_ac_sweep_current_graph = z188.object({
-  type: z188.literal("simulation_ac_sweep_current_graph"),
+import { z as z189 } from "zod";
+var simulation_ac_sweep_current_graph = z189.object({
+  type: z189.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z188.string(),
+  simulation_experiment_id: z189.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z188.string(),
-  frequencies_hz: z188.array(z188.number()),
-  complex_currents: z188.array(simulation_complex_sample),
-  name: z188.string().optional(),
-  color: z188.string().optional()
+  simulation_current_probe_id: z189.string(),
+  frequencies_hz: z189.array(z189.number()),
+  complex_currents: z189.array(simulation_complex_sample),
+  name: z189.string().optional(),
+  color: z189.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4183,52 +4230,52 @@ var simulation_ac_sweep_current_graph = z188.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z189 } from "zod";
-var simulation_op_amp = z189.object({
-  type: z189.literal("simulation_op_amp"),
+import { z as z190 } from "zod";
+var simulation_op_amp = z190.object({
+  type: z190.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z189.string().optional(),
-  inverting_input_source_port_id: z189.string(),
-  non_inverting_input_source_port_id: z189.string(),
-  output_source_port_id: z189.string(),
-  positive_supply_source_port_id: z189.string(),
-  negative_supply_source_port_id: z189.string()
+  source_component_id: z190.string().optional(),
+  inverting_input_source_port_id: z190.string(),
+  non_inverting_input_source_port_id: z190.string(),
+  output_source_port_id: z190.string(),
+  positive_supply_source_port_id: z190.string(),
+  negative_supply_source_port_id: z190.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z190 } from "zod";
-var simulation_spice_subcircuit = z190.object({
-  type: z190.literal("simulation_spice_subcircuit"),
+import { z as z191 } from "zod";
+var simulation_spice_subcircuit = z191.object({
+  type: z191.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z190.string(),
-  spice_pin_to_source_port_map: z190.record(z190.string(), z190.string()),
-  subcircuit_source: z190.string()
+  source_component_id: z191.string(),
+  spice_pin_to_source_port_map: z191.record(z191.string(), z191.string()),
+  subcircuit_source: z191.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z191 } from "zod";
+import { z as z192 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z191.object({
-  type: z191.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z192.object({
+  type: z192.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z191.string().optional(),
-  simulation_transient_current_graph_id: z191.string().optional(),
-  simulation_voltage_probe_id: z191.string().optional(),
-  simulation_current_probe_id: z191.string().optional(),
-  display_name: z191.string().optional(),
-  color: z191.string().optional(),
-  display_center_value: z191.number().optional(),
-  display_center_offset_divs: z191.number().optional(),
-  volts_per_div: z191.number().positive().optional(),
-  amps_per_div: z191.number().positive().optional()
+  simulation_transient_voltage_graph_id: z192.string().optional(),
+  simulation_transient_current_graph_id: z192.string().optional(),
+  simulation_voltage_probe_id: z192.string().optional(),
+  simulation_current_probe_id: z192.string().optional(),
+  display_name: z192.string().optional(),
+  color: z192.string().optional(),
+  display_center_value: z192.number().optional(),
+  display_center_offset_divs: z192.number().optional(),
+  volts_per_div: z192.number().positive().optional(),
+  amps_per_div: z192.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4242,19 +4289,19 @@ var simulation_oscilloscope_trace = z191.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z191.ZodIssueCode.custom,
+      code: z192.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z191.ZodIssueCode.custom,
+      code: z192.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z191.ZodIssueCode.custom,
+      code: z192.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4262,8 +4309,8 @@ var simulation_oscilloscope_trace = z191.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z192 } from "zod";
-var any_circuit_element = z192.union([
+import { z as z193 } from "zod";
+var any_circuit_element = z193.union([
   source_trace,
   source_port,
   source_component_internal_connection,
@@ -4446,6 +4493,9 @@ export {
   frequency,
   getZodPrefixedIdWithDefault,
   inductance,
+  insertionDirectionToCanonical,
+  insertionDirectionToVector,
+  insertion_direction,
   kicadAt,
   kicadEffects,
   kicadFont,