circuit-json 0.0.454 → 0.0.455

package/dist/index.mjs

@@ -2492,40 +2492,51 @@ var pcb_placement_error = base_circuit_json_error.extend({
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_panelization_placement_error.ts
+// src/pcb/pcb_packing_error.ts
 import { z as z119 } from "zod";
+var pcb_packing_error = base_circuit_json_error.extend({
+  type: z119.literal("pcb_packing_error"),
+  pcb_packing_error_id: getZodPrefixedIdWithDefault("pcb_packing_error"),
+  error_type: z119.literal("pcb_packing_error").default("pcb_packing_error"),
+  pcb_group_id: z119.string().optional(),
+  subcircuit_id: z119.string().optional()
+}).describe("Defines a failure to pack PCB components within layout bounds");
+expectTypesMatch(true);
+
+// src/pcb/pcb_panelization_placement_error.ts
+import { z as z120 } from "zod";
 var pcb_panelization_placement_error = base_circuit_json_error.extend({
-  type: z119.literal("pcb_panelization_placement_error"),
+  type: z120.literal("pcb_panelization_placement_error"),
   pcb_panelization_placement_error_id: getZodPrefixedIdWithDefault(
     "pcb_panelization_placement_error"
   ),
-  error_type: z119.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
-  pcb_panel_id: z119.string().optional(),
-  pcb_board_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional()
+  error_type: z120.literal("pcb_panelization_placement_error").default("pcb_panelization_placement_error"),
+  pcb_panel_id: z120.string().optional(),
+  pcb_board_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional()
 }).describe("Defines a panelization placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z120 } from "zod";
-var pcb_trace_hint = z120.object({
-  type: z120.literal("pcb_trace_hint"),
+import { z as z121 } from "zod";
+var pcb_trace_hint = z121.object({
+  type: z121.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z120.string(),
-  pcb_component_id: z120.string(),
-  route: z120.array(route_hint_point),
-  subcircuit_id: z120.string().optional()
+  pcb_port_id: z121.string(),
+  pcb_component_id: z121.string(),
+  route: z121.array(route_hint_point),
+  subcircuit_id: z121.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z121 } from "zod";
-var pcb_silkscreen_line = z121.object({
-  type: z121.literal("pcb_silkscreen_line"),
+import { z as z122 } from "zod";
+var pcb_silkscreen_line = z122.object({
+  type: z122.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z121.string(),
-  pcb_group_id: z121.string().optional(),
-  subcircuit_id: z121.string().optional(),
+  pcb_component_id: z122.string(),
+  pcb_group_id: z122.string().optional(),
+  subcircuit_id: z122.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -2536,32 +2547,32 @@ var pcb_silkscreen_line = z121.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z122 } from "zod";
-var pcb_silkscreen_path = z122.object({
-  type: z122.literal("pcb_silkscreen_path"),
+import { z as z123 } from "zod";
+var pcb_silkscreen_path = z123.object({
+  type: z123.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z122.string(),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
+  pcb_component_id: z123.string(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
   layer: visible_layer,
-  route: z122.array(point),
+  route: z123.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z123 } from "zod";
-var pcb_silkscreen_text = z123.object({
-  type: z123.literal("pcb_silkscreen_text"),
+import { z as z124 } from "zod";
+var pcb_silkscreen_text = z124.object({
+  type: z124.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z123.string().optional(),
-  subcircuit_id: z123.string().optional(),
-  font: z123.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z124.string().optional(),
+  subcircuit_id: z124.string().optional(),
+  font: z124.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z123.string(),
-  text: z123.string(),
-  is_knockout: z123.boolean().default(false).optional(),
-  knockout_padding: z123.object({
+  pcb_component_id: z124.string(),
+  text: z124.string(),
+  is_knockout: z124.boolean().default(false).optional(),
+  knockout_padding: z124.object({
     left: length,
     top: length,
     bottom: length,
@@ -2572,27 +2583,27 @@ var pcb_silkscreen_text = z123.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z123.number().optional(),
+  ccw_rotation: z124.number().optional(),
   layer: layer_ref,
-  is_mirrored: z123.boolean().default(false).optional(),
+  is_mirrored: z124.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z124 } from "zod";
-var pcb_copper_text = z124.object({
-  type: z124.literal("pcb_copper_text"),
+import { z as z125 } from "zod";
+var pcb_copper_text = z125.object({
+  type: z125.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z124.string().optional(),
-  subcircuit_id: z124.string().optional(),
-  font: z124.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z125.string().optional(),
+  subcircuit_id: z125.string().optional(),
+  font: z125.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z124.string(),
-  text: z124.string(),
-  is_knockout: z124.boolean().default(false).optional(),
-  knockout_padding: z124.object({
+  pcb_component_id: z125.string(),
+  text: z125.string(),
+  is_knockout: z125.boolean().default(false).optional(),
+  knockout_padding: z125.object({
     left: length,
     top: length,
     bottom: length,
@@ -2603,61 +2614,61 @@ var pcb_copper_text = z124.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z124.number().optional(),
+  ccw_rotation: z125.number().optional(),
   layer: layer_ref,
-  is_mirrored: z124.boolean().default(false).optional(),
+  is_mirrored: z125.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z125 } from "zod";
-var pcb_silkscreen_rect = z125.object({
-  type: z125.literal("pcb_silkscreen_rect"),
+import { z as z126 } from "zod";
+var pcb_silkscreen_rect = z126.object({
+  type: z126.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z125.string(),
-  pcb_group_id: z125.string().optional(),
-  subcircuit_id: z125.string().optional(),
+  pcb_component_id: z126.string(),
+  pcb_group_id: z126.string().optional(),
+  subcircuit_id: z126.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z125.boolean().default(true).optional(),
-  has_stroke: z125.boolean().optional(),
-  is_stroke_dashed: z125.boolean().optional(),
-  ccw_rotation: z125.number().optional()
+  is_filled: z126.boolean().default(true).optional(),
+  has_stroke: z126.boolean().optional(),
+  is_stroke_dashed: z126.boolean().optional(),
+  ccw_rotation: z126.number().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z126 } from "zod";
-var pcb_silkscreen_circle = z126.object({
-  type: z126.literal("pcb_silkscreen_circle"),
+import { z as z127 } from "zod";
+var pcb_silkscreen_circle = z127.object({
+  type: z127.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z126.string(),
-  pcb_group_id: z126.string().optional(),
-  subcircuit_id: z126.string().optional(),
+  pcb_component_id: z127.string(),
+  pcb_group_id: z127.string().optional(),
+  subcircuit_id: z127.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm"),
-  is_filled: z126.boolean().optional()
+  is_filled: z127.boolean().optional()
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z127 } from "zod";
-var pcb_silkscreen_oval = z127.object({
-  type: z127.literal("pcb_silkscreen_oval"),
+import { z as z128 } from "zod";
+var pcb_silkscreen_oval = z128.object({
+  type: z128.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z127.string(),
-  pcb_group_id: z127.string().optional(),
-  subcircuit_id: z127.string().optional(),
+  pcb_component_id: z128.string(),
+  pcb_group_id: z128.string().optional(),
+  subcircuit_id: z128.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -2667,265 +2678,265 @@ var pcb_silkscreen_oval = z127.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_graphic.ts
-import { z as z128 } from "zod";
-var pcb_silkscreen_graphic_base = z128.object({
-  type: z128.literal("pcb_silkscreen_graphic"),
+import { z as z129 } from "zod";
+var pcb_silkscreen_graphic_base = z129.object({
+  type: z129.literal("pcb_silkscreen_graphic"),
   pcb_silkscreen_graphic_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_graphic"
   ),
-  pcb_component_id: z128.string(),
-  pcb_group_id: z128.string().optional(),
-  subcircuit_id: z128.string().optional(),
+  pcb_component_id: z129.string(),
+  pcb_group_id: z129.string().optional(),
+  subcircuit_id: z129.string().optional(),
   layer: visible_layer,
   image_asset: asset.optional()
 });
 var pcb_silkscreen_graphic_brep = pcb_silkscreen_graphic_base.extend({
-  shape: z128.literal("brep"),
+  shape: z129.literal("brep"),
   brep_shape
 }).describe("Defines a BRep silkscreen graphic on the PCB");
 expectTypesMatch(
   true
 );
-var pcb_silkscreen_graphic = z128.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
+var pcb_silkscreen_graphic = z129.discriminatedUnion("shape", [pcb_silkscreen_graphic_brep]).describe("Defines a silkscreen graphic on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z129 } from "zod";
-var pcb_silkscreen_pill = z129.object({
-  type: z129.literal("pcb_silkscreen_pill"),
+import { z as z130 } from "zod";
+var pcb_silkscreen_pill = z130.object({
+  type: z130.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z129.string(),
-  pcb_group_id: z129.string().optional(),
-  subcircuit_id: z129.string().optional(),
+  pcb_component_id: z130.string(),
+  pcb_group_id: z130.string().optional(),
+  subcircuit_id: z130.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
-  ccw_rotation: z129.number().optional()
+  ccw_rotation: z130.number().optional()
 }).describe("Defines a silkscreen pill on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z130 } from "zod";
-var pcb_fabrication_note_text = z130.object({
-  type: z130.literal("pcb_fabrication_note_text"),
+import { z as z131 } from "zod";
+var pcb_fabrication_note_text = z131.object({
+  type: z131.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z130.string().optional(),
-  pcb_group_id: z130.string().optional(),
-  font: z130.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z131.string().optional(),
+  pcb_group_id: z131.string().optional(),
+  font: z131.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z130.string(),
-  text: z130.string(),
-  ccw_rotation: z130.number().optional(),
+  pcb_component_id: z131.string(),
+  text: z131.string(),
+  ccw_rotation: z131.number().optional(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z130.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z130.string().optional()
+  anchor_alignment: z131.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z131.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z131 } from "zod";
-var pcb_fabrication_note_path = z131.object({
-  type: z131.literal("pcb_fabrication_note_path"),
+import { z as z132 } from "zod";
+var pcb_fabrication_note_path = z132.object({
+  type: z132.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z131.string(),
-  subcircuit_id: z131.string().optional(),
+  pcb_component_id: z132.string(),
+  subcircuit_id: z132.string().optional(),
   layer: layer_ref,
-  route: z131.array(point),
+  route: z132.array(point),
   stroke_width: length,
-  color: z131.string().optional()
+  color: z132.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z132 } from "zod";
-var pcb_fabrication_note_rect = z132.object({
-  type: z132.literal("pcb_fabrication_note_rect"),
+import { z as z133 } from "zod";
+var pcb_fabrication_note_rect = z133.object({
+  type: z133.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z132.string(),
-  pcb_group_id: z132.string().optional(),
-  subcircuit_id: z132.string().optional(),
+  pcb_component_id: z133.string(),
+  pcb_group_id: z133.string().optional(),
+  subcircuit_id: z133.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z132.boolean().optional(),
-  has_stroke: z132.boolean().optional(),
-  is_stroke_dashed: z132.boolean().optional(),
-  color: z132.string().optional()
+  is_filled: z133.boolean().optional(),
+  has_stroke: z133.boolean().optional(),
+  is_stroke_dashed: z133.boolean().optional(),
+  color: z133.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z133 } from "zod";
-var pcb_fabrication_note_dimension = z133.object({
-  type: z133.literal("pcb_fabrication_note_dimension"),
+import { z as z134 } from "zod";
+var pcb_fabrication_note_dimension = z134.object({
+  type: z134.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z133.string(),
-  pcb_group_id: z133.string().optional(),
-  subcircuit_id: z133.string().optional(),
+  pcb_component_id: z134.string(),
+  pcb_group_id: z134.string().optional(),
+  subcircuit_id: z134.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z133.string().optional(),
-  text_ccw_rotation: z133.number().optional(),
+  text: z134.string().optional(),
+  text_ccw_rotation: z134.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z133.object({
-    x: z133.number(),
-    y: z133.number()
+  offset_direction: z134.object({
+    x: z134.number(),
+    y: z134.number()
   }).optional(),
-  font: z133.literal("tscircuit2024").default("tscircuit2024"),
+  font: z134.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z133.string().optional(),
+  color: z134.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z134 } from "zod";
-var pcb_note_text = z134.object({
-  type: z134.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z134.string().optional(),
-  pcb_group_id: z134.string().optional(),
-  subcircuit_id: z134.string().optional(),
-  name: z134.string().optional(),
-  font: z134.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z134.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z134.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  layer: visible_layer.default("top"),
-  is_mirrored_from_top_view: z134.boolean().optional(),
-  color: z134.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-
-// src/pcb/pcb_note_rect.ts
 import { z as z135 } from "zod";
-var pcb_note_rect = z135.object({
-  type: z135.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
+var pcb_note_text = z135.object({
+  type: z135.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
   pcb_component_id: z135.string().optional(),
   pcb_group_id: z135.string().optional(),
   subcircuit_id: z135.string().optional(),
   name: z135.string().optional(),
+  font: z135.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z135.string().optional(),
-  center: point,
-  width: length,
-  height: length,
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z135.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   layer: visible_layer.default("top"),
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z135.boolean().optional(),
-  has_stroke: z135.boolean().optional(),
-  is_stroke_dashed: z135.boolean().optional(),
+  is_mirrored_from_top_view: z135.boolean().optional(),
   color: z135.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_path.ts
+// src/pcb/pcb_note_rect.ts
 import { z as z136 } from "zod";
-var pcb_note_path = z136.object({
-  type: z136.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z136.object({
+  type: z136.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z136.string().optional(),
   pcb_group_id: z136.string().optional(),
   subcircuit_id: z136.string().optional(),
   name: z136.string().optional(),
   text: z136.string().optional(),
-  route: z136.array(point),
+  center: point,
+  width: length,
+  height: length,
   layer: visible_layer.default("top"),
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z136.boolean().optional(),
+  has_stroke: z136.boolean().optional(),
+  is_stroke_dashed: z136.boolean().optional(),
   color: z136.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_line.ts
+// src/pcb/pcb_note_path.ts
 import { z as z137 } from "zod";
-var pcb_note_line = z137.object({
-  type: z137.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z137.object({
+  type: z137.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z137.string().optional(),
   pcb_group_id: z137.string().optional(),
   subcircuit_id: z137.string().optional(),
   name: z137.string().optional(),
   text: z137.string().optional(),
+  route: z137.array(point),
+  layer: visible_layer.default("top"),
+  stroke_width: length.default("0.1mm"),
+  color: z137.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_line.ts
+import { z as z138 } from "zod";
+var pcb_note_line = z138.object({
+  type: z138.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z138.string().optional(),
+  pcb_group_id: z138.string().optional(),
+  subcircuit_id: z138.string().optional(),
+  name: z138.string().optional(),
+  text: z138.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   layer: visible_layer.default("top"),
   stroke_width: distance.default("0.1mm"),
-  color: z137.string().optional(),
-  is_dashed: z137.boolean().optional()
+  color: z138.string().optional(),
+  is_dashed: z138.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z138 } from "zod";
-var pcb_note_dimension = z138.object({
-  type: z138.literal("pcb_note_dimension"),
+import { z as z139 } from "zod";
+var pcb_note_dimension = z139.object({
+  type: z139.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z138.string().optional(),
-  pcb_group_id: z138.string().optional(),
-  subcircuit_id: z138.string().optional(),
-  name: z138.string().optional(),
+  pcb_component_id: z139.string().optional(),
+  pcb_group_id: z139.string().optional(),
+  subcircuit_id: z139.string().optional(),
+  name: z139.string().optional(),
   from: point,
   to: point,
-  text: z138.string().optional(),
-  text_ccw_rotation: z138.number().optional(),
+  text: z139.string().optional(),
+  text_ccw_rotation: z139.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z138.object({
-    x: z138.number(),
-    y: z138.number()
+  offset_direction: z139.object({
+    x: z139.number(),
+    y: z139.number()
   }).optional(),
-  font: z138.literal("tscircuit2024").default("tscircuit2024"),
+  font: z139.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
   layer: visible_layer.default("top"),
-  color: z138.string().optional(),
+  color: z139.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z139 } from "zod";
+import { z as z140 } from "zod";
 var pcb_footprint_overlap_error = base_circuit_json_error.extend({
-  type: z139.literal("pcb_footprint_overlap_error"),
+  type: z140.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z139.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  pcb_smtpad_ids: z139.array(z139.string()).optional(),
-  pcb_plated_hole_ids: z139.array(z139.string()).optional(),
-  pcb_hole_ids: z139.array(z139.string()).optional(),
-  pcb_keepout_ids: z139.array(z139.string()).optional()
+  error_type: z140.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  pcb_smtpad_ids: z140.array(z140.string()).optional(),
+  pcb_plated_hole_ids: z140.array(z140.string()).optional(),
+  pcb_hole_ids: z140.array(z140.string()).optional(),
+  pcb_keepout_ids: z140.array(z140.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_courtyard_overlap_error.ts
-import { z as z140 } from "zod";
+import { z as z141 } from "zod";
 var pcb_courtyard_overlap_error = base_circuit_json_error.extend({
-  type: z140.literal("pcb_courtyard_overlap_error"),
+  type: z141.literal("pcb_courtyard_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z140.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
-  pcb_component_ids: z140.tuple([z140.string(), z140.string()])
+  error_type: z141.literal("pcb_courtyard_overlap_error").default("pcb_courtyard_overlap_error"),
+  pcb_component_ids: z141.tuple([z141.string(), z141.string()])
 }).describe(
   "Error emitted when the courtyard (CrtYd) of one PCB component overlaps with the courtyard of another"
 );
@@ -2934,49 +2945,49 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z141 } from "zod";
-var pcb_keepout = z141.object({
-  type: z141.literal("pcb_keepout"),
-  shape: z141.literal("rect"),
-  pcb_group_id: z141.string().optional(),
-  subcircuit_id: z141.string().optional(),
+import { z as z142 } from "zod";
+var pcb_keepout = z142.object({
+  type: z142.literal("pcb_keepout"),
+  shape: z142.literal("rect"),
+  pcb_group_id: z142.string().optional(),
+  subcircuit_id: z142.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z141.string(),
-  layers: z141.array(z141.string()),
+  pcb_keepout_id: z142.string(),
+  layers: z142.array(z142.string()),
   // Specify layers where the keepout applies
-  description: z141.string().optional()
+  description: z142.string().optional()
   // Optional description of the keepout
 }).or(
-  z141.object({
-    type: z141.literal("pcb_keepout"),
-    shape: z141.literal("circle"),
-    pcb_group_id: z141.string().optional(),
-    subcircuit_id: z141.string().optional(),
+  z142.object({
+    type: z142.literal("pcb_keepout"),
+    shape: z142.literal("circle"),
+    pcb_group_id: z142.string().optional(),
+    subcircuit_id: z142.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z141.string(),
-    layers: z141.array(z141.string()),
+    pcb_keepout_id: z142.string(),
+    layers: z142.array(z142.string()),
     // Specify layers where the keepout applies
-    description: z141.string().optional()
+    description: z142.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z142 } from "zod";
-var pcb_cutout_base = z142.object({
-  type: z142.literal("pcb_cutout"),
+import { z as z143 } from "zod";
+var pcb_cutout_base = z143.object({
+  type: z143.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z142.string().optional(),
-  subcircuit_id: z142.string().optional(),
-  pcb_board_id: z142.string().optional(),
-  pcb_panel_id: z142.string().optional()
+  pcb_group_id: z143.string().optional(),
+  subcircuit_id: z143.string().optional(),
+  pcb_board_id: z143.string().optional(),
+  pcb_panel_id: z143.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z142.literal("rect"),
+  shape: z143.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2985,26 +2996,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z142.literal("circle"),
+  shape: z143.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z142.literal("polygon"),
-  points: z142.array(point)
+  shape: z143.literal("polygon"),
+  points: z143.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z142.literal("path"),
-  route: z142.array(point),
+  shape: z143.literal("path"),
+  route: z143.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z142.discriminatedUnion("shape", [
+var pcb_cutout = z143.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -3013,169 +3024,169 @@ var pcb_cutout = z142.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z143 } from "zod";
+import { z as z144 } from "zod";
 var pcb_missing_footprint_error = base_circuit_json_error.extend({
-  type: z143.literal("pcb_missing_footprint_error"),
+  type: z144.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z143.string().optional(),
-  subcircuit_id: z143.string().optional(),
-  error_type: z143.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z143.string()
+  pcb_group_id: z144.string().optional(),
+  subcircuit_id: z144.string().optional(),
+  error_type: z144.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z144.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z144 } from "zod";
+import { z as z145 } from "zod";
 var external_footprint_load_error = base_circuit_json_error.extend({
-  type: z144.literal("external_footprint_load_error"),
+  type: z145.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z144.string(),
-  source_component_id: z144.string(),
-  pcb_group_id: z144.string().optional(),
-  subcircuit_id: z144.string().optional(),
-  footprinter_string: z144.string().optional(),
-  error_type: z144.literal("external_footprint_load_error").default("external_footprint_load_error")
+  pcb_component_id: z145.string(),
+  source_component_id: z145.string(),
+  pcb_group_id: z145.string().optional(),
+  subcircuit_id: z145.string().optional(),
+  footprinter_string: z145.string().optional(),
+  error_type: z145.literal("external_footprint_load_error").default("external_footprint_load_error")
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z145 } from "zod";
+import { z as z146 } from "zod";
 var circuit_json_footprint_load_error = base_circuit_json_error.extend({
-  type: z145.literal("circuit_json_footprint_load_error"),
+  type: z146.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z145.string(),
-  source_component_id: z145.string(),
-  pcb_group_id: z145.string().optional(),
-  subcircuit_id: z145.string().optional(),
-  error_type: z145.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  circuit_json: z145.array(z145.any()).optional()
+  pcb_component_id: z146.string(),
+  source_component_id: z146.string(),
+  pcb_group_id: z146.string().optional(),
+  subcircuit_id: z146.string().optional(),
+  error_type: z146.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  circuit_json: z146.array(z146.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z146 } from "zod";
-var pcb_group = z146.object({
-  type: z146.literal("pcb_group"),
+import { z as z147 } from "zod";
+var pcb_group = z147.object({
+  type: z147.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z146.string(),
-  is_subcircuit: z146.boolean().optional(),
-  subcircuit_id: z146.string().optional(),
+  source_group_id: z147.string(),
+  is_subcircuit: z147.boolean().optional(),
+  subcircuit_id: z147.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z146.string().optional().describe(
+  display_offset_x: z147.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z146.string().optional().describe(
+  display_offset_y: z147.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z146.array(point).optional(),
+  outline: z147.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z146.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z146.string().optional(),
-  positioned_relative_to_pcb_board_id: z146.string().optional(),
-  pcb_component_ids: z146.array(z146.string()),
-  child_layout_mode: z146.enum(["packed", "none"]).optional(),
-  name: z146.string().optional(),
-  description: z146.string().optional(),
-  layout_mode: z146.string().optional(),
-  autorouter_configuration: z146.object({
+  position_mode: z147.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z147.string().optional(),
+  positioned_relative_to_pcb_board_id: z147.string().optional(),
+  pcb_component_ids: z147.array(z147.string()),
+  child_layout_mode: z147.enum(["packed", "none"]).optional(),
+  name: z147.string().optional(),
+  description: z147.string().optional(),
+  layout_mode: z147.string().optional(),
+  autorouter_configuration: z147.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z146.string().optional()
+  autorouter_used_string: z147.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z147 } from "zod";
+import { z as z148 } from "zod";
 var pcb_autorouting_error = base_circuit_json_error.extend({
-  type: z147.literal("pcb_autorouting_error"),
+  type: z148.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z147.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  subcircuit_id: z147.string().optional()
+  error_type: z148.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  subcircuit_id: z148.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z148 } from "zod";
-var pcb_manual_edit_conflict_warning = z148.object({
-  type: z148.literal("pcb_manual_edit_conflict_warning"),
+import { z as z149 } from "zod";
+var pcb_manual_edit_conflict_warning = z149.object({
+  type: z149.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z148.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z148.string(),
-  pcb_component_id: z148.string(),
-  pcb_group_id: z148.string().optional(),
-  subcircuit_id: z148.string().optional(),
-  source_component_id: z148.string()
+  warning_type: z149.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z149.string(),
+  pcb_component_id: z149.string(),
+  pcb_group_id: z149.string().optional(),
+  subcircuit_id: z149.string().optional(),
+  source_component_id: z149.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_connector_not_in_accessible_orientation_warning.ts
-import { z as z149 } from "zod";
-var connectorOrientationDirection = z149.enum(["x-", "x+", "y+", "y-"]);
-var pcb_connector_not_in_accessible_orientation_warning = z149.object({
-  type: z149.literal("pcb_connector_not_in_accessible_orientation_warning"),
+import { z as z150 } from "zod";
+var connectorOrientationDirection = z150.enum(["x-", "x+", "y+", "y-"]);
+var pcb_connector_not_in_accessible_orientation_warning = z150.object({
+  type: z150.literal("pcb_connector_not_in_accessible_orientation_warning"),
   pcb_connector_not_in_accessible_orientation_warning_id: getZodPrefixedIdWithDefault(
     "pcb_connector_not_in_accessible_orientation_warning"
   ),
-  warning_type: z149.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
-  message: z149.string(),
-  pcb_component_id: z149.string(),
-  source_component_id: z149.string().optional(),
-  pcb_board_id: z149.string().optional(),
+  warning_type: z150.literal("pcb_connector_not_in_accessible_orientation_warning").default("pcb_connector_not_in_accessible_orientation_warning"),
+  message: z150.string(),
+  pcb_component_id: z150.string(),
+  source_component_id: z150.string().optional(),
+  pcb_board_id: z150.string().optional(),
   facing_direction: connectorOrientationDirection,
   recommended_facing_direction: connectorOrientationDirection,
-  subcircuit_id: z149.string().optional()
+  subcircuit_id: z150.string().optional()
 }).describe(
   "Warning emitted when a connector PCB component is facing inward toward the board and should be reoriented to an outward-facing direction"
 );
 expectTypesMatch(true);
 
 // src/pcb/supplier_footprint_mismatch_warning.ts
-import { z as z150 } from "zod";
-var supplier_footprint_mismatch_warning = z150.object({
-  type: z150.literal("supplier_footprint_mismatch_warning"),
+import { z as z151 } from "zod";
+var supplier_footprint_mismatch_warning = z151.object({
+  type: z151.literal("supplier_footprint_mismatch_warning"),
   supplier_footprint_mismatch_warning_id: getZodPrefixedIdWithDefault(
     "supplier_footprint_mismatch_warning"
   ),
-  warning_type: z150.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
-  message: z150.string(),
-  source_component_id: z150.string(),
-  pcb_component_id: z150.string().optional(),
-  pcb_group_id: z150.string().optional(),
-  subcircuit_id: z150.string().optional(),
+  warning_type: z151.literal("supplier_footprint_mismatch_warning").default("supplier_footprint_mismatch_warning"),
+  message: z151.string(),
+  source_component_id: z151.string(),
+  pcb_component_id: z151.string().optional(),
+  pcb_group_id: z151.string().optional(),
+  subcircuit_id: z151.string().optional(),
   supplier_name: supplier_name.optional(),
-  supplier_part_number: z150.string().optional(),
-  supplier_footprint_url: z150.string().optional(),
-  footprint_copper_intersection_over_union: z150.number()
+  supplier_part_number: z151.string().optional(),
+  supplier_footprint_url: z151.string().optional(),
+  footprint_copper_intersection_over_union: z151.number()
 }).describe(
   "Warning emitted when a supplier part footprint does not match the expected footprint"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z151 } from "zod";
-var pcb_breakout_point = z151.object({
-  type: z151.literal("pcb_breakout_point"),
+import { z as z152 } from "zod";
+var pcb_breakout_point = z152.object({
+  type: z152.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z151.string(),
-  subcircuit_id: z151.string().optional(),
-  source_trace_id: z151.string().optional(),
-  source_port_id: z151.string().optional(),
-  source_net_id: z151.string().optional(),
+  pcb_group_id: z152.string(),
+  subcircuit_id: z152.string().optional(),
+  source_trace_id: z152.string().optional(),
+  source_port_id: z152.string().optional(),
+  source_net_id: z152.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -3184,61 +3195,61 @@ var pcb_breakout_point = z151.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z152 } from "zod";
-var pcb_ground_plane = z152.object({
-  type: z152.literal("pcb_ground_plane"),
+import { z as z153 } from "zod";
+var pcb_ground_plane = z153.object({
+  type: z153.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z152.string(),
-  source_net_id: z152.string(),
-  pcb_group_id: z152.string().optional(),
-  subcircuit_id: z152.string().optional()
+  source_pcb_ground_plane_id: z153.string(),
+  source_net_id: z153.string(),
+  pcb_group_id: z153.string().optional(),
+  subcircuit_id: z153.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z153 } from "zod";
-var pcb_ground_plane_region = z153.object({
-  type: z153.literal("pcb_ground_plane_region"),
+import { z as z154 } from "zod";
+var pcb_ground_plane_region = z154.object({
+  type: z154.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z153.string(),
-  pcb_group_id: z153.string().optional(),
-  subcircuit_id: z153.string().optional(),
+  pcb_ground_plane_id: z154.string(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional(),
   layer: layer_ref,
-  points: z153.array(point)
+  points: z154.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z154 } from "zod";
-var pcb_thermal_spoke = z154.object({
-  type: z154.literal("pcb_thermal_spoke"),
+import { z as z155 } from "zod";
+var pcb_thermal_spoke = z155.object({
+  type: z155.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z154.string(),
-  shape: z154.string(),
-  spoke_count: z154.number(),
+  pcb_ground_plane_id: z155.string(),
+  shape: z155.string(),
+  spoke_count: z155.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z154.string().optional(),
-  subcircuit_id: z154.string().optional()
+  pcb_plated_hole_id: z155.string().optional(),
+  subcircuit_id: z155.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z155 } from "zod";
-var pcb_copper_pour_base = z155.object({
-  type: z155.literal("pcb_copper_pour"),
+import { z as z156 } from "zod";
+var pcb_copper_pour_base = z156.object({
+  type: z156.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z155.string().optional(),
-  subcircuit_id: z155.string().optional(),
+  pcb_group_id: z156.string().optional(),
+  subcircuit_id: z156.string().optional(),
   layer: layer_ref,
-  source_net_id: z155.string().optional(),
-  covered_with_solder_mask: z155.boolean().optional().default(true)
+  source_net_id: z156.string().optional(),
+  covered_with_solder_mask: z156.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z155.literal("rect"),
+  shape: z156.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3246,16 +3257,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z155.literal("brep"),
+  shape: z156.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z155.literal("polygon"),
-  points: z155.array(point)
+  shape: z156.literal("polygon"),
+  points: z156.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z155.discriminatedUnion("shape", [
+var pcb_copper_pour = z156.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -3263,99 +3274,99 @@ var pcb_copper_pour = z155.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z156 } from "zod";
+import { z as z157 } from "zod";
 var pcb_component_outside_board_error = base_circuit_json_error.extend({
-  type: z156.literal("pcb_component_outside_board_error"),
+  type: z157.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z156.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  pcb_component_id: z156.string(),
-  pcb_board_id: z156.string(),
+  error_type: z157.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  pcb_component_id: z157.string(),
+  pcb_board_id: z157.string(),
   component_center: point,
-  component_bounds: z156.object({
-    min_x: z156.number(),
-    max_x: z156.number(),
-    min_y: z156.number(),
-    max_y: z156.number()
+  component_bounds: z157.object({
+    min_x: z157.number(),
+    max_x: z157.number(),
+    min_y: z157.number(),
+    max_y: z157.number()
   }),
-  subcircuit_id: z156.string().optional(),
-  source_component_id: z156.string().optional()
+  subcircuit_id: z157.string().optional(),
+  source_component_id: z157.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_not_on_board_edge_error.ts
-import { z as z157 } from "zod";
+import { z as z158 } from "zod";
 var pcb_component_not_on_board_edge_error = base_circuit_json_error.extend({
-  type: z157.literal("pcb_component_not_on_board_edge_error"),
+  type: z158.literal("pcb_component_not_on_board_edge_error"),
   pcb_component_not_on_board_edge_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_not_on_board_edge_error"
   ),
-  error_type: z157.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
-  pcb_component_id: z157.string(),
-  pcb_board_id: z157.string(),
+  error_type: z158.literal("pcb_component_not_on_board_edge_error").default("pcb_component_not_on_board_edge_error"),
+  pcb_component_id: z158.string(),
+  pcb_board_id: z158.string(),
   component_center: point,
-  pad_to_nearest_board_edge_distance: z157.number(),
-  source_component_id: z157.string().optional(),
-  subcircuit_id: z157.string().optional()
+  pad_to_nearest_board_edge_distance: z158.number(),
+  source_component_id: z158.string().optional(),
+  subcircuit_id: z158.string().optional()
 }).describe(
   "Error emitted when a component that must be placed on the board edge is centered away from the edge"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z158 } from "zod";
+import { z as z159 } from "zod";
 var pcb_component_invalid_layer_error = base_circuit_json_error.extend({
-  type: z158.literal("pcb_component_invalid_layer_error"),
+  type: z159.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z158.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  pcb_component_id: z158.string().optional(),
-  source_component_id: z158.string(),
+  error_type: z159.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  pcb_component_id: z159.string().optional(),
+  source_component_id: z159.string(),
   layer: layer_ref,
-  subcircuit_id: z158.string().optional()
+  subcircuit_id: z159.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z159 } from "zod";
+import { z as z160 } from "zod";
 var pcb_via_clearance_error = base_circuit_json_error.extend({
-  type: z159.literal("pcb_via_clearance_error"),
+  type: z160.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z159.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  pcb_via_ids: z159.array(z159.string()).min(2),
+  error_type: z160.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  pcb_via_ids: z160.array(z160.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z159.object({
-    x: z159.number().optional(),
-    y: z159.number().optional()
+  pcb_center: z160.object({
+    x: z160.number().optional(),
+    y: z160.number().optional()
   }).optional(),
-  subcircuit_id: z159.string().optional()
+  subcircuit_id: z160.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_trace_clearance_error.ts
-import { z as z160 } from "zod";
+import { z as z161 } from "zod";
 var pcb_via_trace_clearance_error = base_circuit_json_error.extend({
-  type: z160.literal("pcb_via_trace_clearance_error"),
+  type: z161.literal("pcb_via_trace_clearance_error"),
   pcb_via_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_via_trace_clearance_error"
   ),
-  error_type: z160.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
-  pcb_via_id: z160.string(),
-  pcb_trace_id: z160.string(),
+  error_type: z161.literal("pcb_via_trace_clearance_error").default("pcb_via_trace_clearance_error"),
+  pcb_via_id: z161.string(),
+  pcb_trace_id: z161.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z160.object({
-    x: z160.number().optional(),
-    y: z160.number().optional()
+  center: z161.object({
+    x: z161.number().optional(),
+    y: z161.number().optional()
   }).optional(),
-  subcircuit_id: z160.string().optional()
+  subcircuit_id: z161.string().optional()
 }).describe(
   "Error emitted when a via and trace are closer than the allowed clearance"
 );
@@ -3364,41 +3375,41 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_pad_pad_clearance_error.ts
-import { z as z161 } from "zod";
+import { z as z162 } from "zod";
 var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
-  type: z161.literal("pcb_pad_pad_clearance_error"),
+  type: z162.literal("pcb_pad_pad_clearance_error"),
   pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_pad_clearance_error"
   ),
-  error_type: z161.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
-  pcb_pad_ids: z161.array(z161.string()).min(2),
+  error_type: z162.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z162.array(z162.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z161.object({
-    x: z161.number().optional(),
-    y: z161.number().optional()
+  center: z162.object({
+    x: z162.number().optional(),
+    y: z162.number().optional()
   }).optional(),
-  subcircuit_id: z161.string().optional()
+  subcircuit_id: z162.string().optional()
 }).describe("Error emitted when pads are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_pad_trace_clearance_error.ts
-import { z as z162 } from "zod";
+import { z as z163 } from "zod";
 var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
-  type: z162.literal("pcb_pad_trace_clearance_error"),
+  type: z163.literal("pcb_pad_trace_clearance_error"),
   pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
     "pcb_pad_trace_clearance_error"
   ),
-  error_type: z162.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
-  pcb_pad_id: z162.string(),
-  pcb_trace_id: z162.string(),
+  error_type: z163.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z163.string(),
+  pcb_trace_id: z163.string(),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  center: z162.object({
-    x: z162.number().optional(),
-    y: z162.number().optional()
+  center: z163.object({
+    x: z163.number().optional(),
+    y: z163.number().optional()
   }).optional(),
-  subcircuit_id: z162.string().optional()
+  subcircuit_id: z163.string().optional()
 }).describe(
   "Error emitted when a pad and trace are closer than allowed clearance"
 );
@@ -3407,89 +3418,89 @@ expectTypesMatch(
 );
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z163 } from "zod";
-var pcb_courtyard_rect = z163.object({
-  type: z163.literal("pcb_courtyard_rect"),
+import { z as z164 } from "zod";
+var pcb_courtyard_rect = z164.object({
+  type: z164.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z163.string(),
-  pcb_group_id: z163.string().optional(),
-  subcircuit_id: z163.string().optional(),
+  pcb_component_id: z164.string(),
+  pcb_group_id: z164.string().optional(),
+  subcircuit_id: z164.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z163.string().optional()
+  color: z164.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z164 } from "zod";
-var pcb_courtyard_outline = z164.object({
-  type: z164.literal("pcb_courtyard_outline"),
+import { z as z165 } from "zod";
+var pcb_courtyard_outline = z165.object({
+  type: z165.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z164.string(),
-  pcb_group_id: z164.string().optional(),
-  subcircuit_id: z164.string().optional(),
+  pcb_component_id: z165.string(),
+  pcb_group_id: z165.string().optional(),
+  subcircuit_id: z165.string().optional(),
   layer: visible_layer,
-  outline: z164.array(point).min(2)
+  outline: z165.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z165 } from "zod";
-var pcb_courtyard_polygon = z165.object({
-  type: z165.literal("pcb_courtyard_polygon"),
+import { z as z166 } from "zod";
+var pcb_courtyard_polygon = z166.object({
+  type: z166.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z165.string(),
-  pcb_group_id: z165.string().optional(),
-  subcircuit_id: z165.string().optional(),
+  pcb_component_id: z166.string(),
+  pcb_group_id: z166.string().optional(),
+  subcircuit_id: z166.string().optional(),
   layer: visible_layer,
-  points: z165.array(point).min(3),
-  color: z165.string().optional()
+  points: z166.array(point).min(3),
+  color: z166.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z166 } from "zod";
-var pcb_courtyard_circle = z166.object({
-  type: z166.literal("pcb_courtyard_circle"),
+import { z as z167 } from "zod";
+var pcb_courtyard_circle = z167.object({
+  type: z167.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z166.string(),
-  pcb_group_id: z166.string().optional(),
-  subcircuit_id: z166.string().optional(),
+  pcb_component_id: z167.string(),
+  pcb_group_id: z167.string().optional(),
+  subcircuit_id: z167.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z166.string().optional()
+  color: z167.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_pill.ts
-import { z as z167 } from "zod";
-var pcb_courtyard_pill = z167.object({
-  type: z167.literal("pcb_courtyard_pill"),
+import { z as z168 } from "zod";
+var pcb_courtyard_pill = z168.object({
+  type: z168.literal("pcb_courtyard_pill"),
   pcb_courtyard_pill_id: getZodPrefixedIdWithDefault("pcb_courtyard_pill"),
-  pcb_component_id: z167.string(),
-  pcb_group_id: z167.string().optional(),
-  subcircuit_id: z167.string().optional(),
+  pcb_component_id: z168.string(),
+  pcb_group_id: z168.string().optional(),
+  subcircuit_id: z168.string().optional(),
   center: point,
   width: length,
   height: length,
   radius: length,
   layer: visible_layer,
-  color: z167.string().optional()
+  color: z168.string().optional()
 }).describe("Defines a courtyard pill on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z168 } from "zod";
+import { z as z169 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -3520,49 +3531,49 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z168.object({
-  type: z168.literal("cad_component"),
-  cad_component_id: z168.string(),
-  pcb_component_id: z168.string(),
-  source_component_id: z168.string(),
+var cad_component = z169.object({
+  type: z169.literal("cad_component"),
+  cad_component_id: z169.string(),
+  pcb_component_id: z169.string(),
+  source_component_id: z169.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z168.string().optional(),
+  subcircuit_id: z169.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z168.string().optional(),
-  model_obj_url: z168.string().optional(),
-  model_stl_url: z168.string().optional(),
-  model_3mf_url: z168.string().optional(),
-  model_gltf_url: z168.string().optional(),
-  model_glb_url: z168.string().optional(),
-  model_step_url: z168.string().optional(),
-  model_wrl_url: z168.string().optional(),
+  footprinter_string: z169.string().optional(),
+  model_obj_url: z169.string().optional(),
+  model_stl_url: z169.string().optional(),
+  model_3mf_url: z169.string().optional(),
+  model_gltf_url: z169.string().optional(),
+  model_glb_url: z169.string().optional(),
+  model_step_url: z169.string().optional(),
+  model_wrl_url: z169.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z168.number().optional(),
-  model_board_normal_direction: z168.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z169.number().optional(),
+  model_board_normal_direction: z169.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z168.enum([
+  model_origin_alignment: z169.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z168.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z168.any().optional(),
-  show_as_translucent_model: z168.boolean().optional(),
-  show_as_bounding_box: z168.boolean().optional(),
-  anchor_alignment: z168.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z169.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z169.any().optional(),
+  show_as_translucent_model: z169.boolean().optional(),
+  show_as_bounding_box: z169.boolean().optional(),
+  anchor_alignment: z169.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z169 } from "zod";
-var wave_shape = z169.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z169.union([z169.string(), z169.number()]).transform((val) => {
+import { z as z170 } from "zod";
+var wave_shape = z170.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z170.union([z170.string(), z170.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3571,32 +3582,32 @@ var percentage = z169.union([z169.string(), z169.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z169.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z170.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z169.object({
-  type: z169.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z170.object({
+  type: z170.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z169.literal(true).optional().default(true),
-  positive_source_port_id: z169.string().optional(),
-  negative_source_port_id: z169.string().optional(),
-  positive_source_net_id: z169.string().optional(),
-  negative_source_net_id: z169.string().optional(),
+  is_dc_source: z170.literal(true).optional().default(true),
+  positive_source_port_id: z170.string().optional(),
+  negative_source_port_id: z170.string().optional(),
+  positive_source_net_id: z170.string().optional(),
+  negative_source_net_id: z170.string().optional(),
   voltage,
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z169.object({
-  type: z169.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z170.object({
+  type: z170.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z169.literal(false),
-  terminal1_source_port_id: z169.string().optional(),
-  terminal2_source_port_id: z169.string().optional(),
-  terminal1_source_net_id: z169.string().optional(),
-  terminal2_source_net_id: z169.string().optional(),
+  is_dc_source: z170.literal(false),
+  terminal1_source_port_id: z170.string().optional(),
+  terminal2_source_port_id: z170.string().optional(),
+  terminal1_source_net_id: z170.string().optional(),
+  terminal2_source_net_id: z170.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -3611,14 +3622,14 @@ var simulation_ac_voltage_source = z169.object({
   ac_magnitude: voltage.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z169.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z170.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z170 } from "zod";
-var percentage2 = z170.union([z170.string(), z170.number()]).transform((val) => {
+import { z as z171 } from "zod";
+var percentage2 = z171.union([z171.string(), z171.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3627,32 +3638,32 @@ var percentage2 = z170.union([z170.string(), z170.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z170.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z171.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z170.object({
-  type: z170.literal("simulation_current_source"),
+var simulation_dc_current_source = z171.object({
+  type: z171.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z170.literal(true).optional().default(true),
-  positive_source_port_id: z170.string().optional(),
-  negative_source_port_id: z170.string().optional(),
-  positive_source_net_id: z170.string().optional(),
-  negative_source_net_id: z170.string().optional(),
+  is_dc_source: z171.literal(true).optional().default(true),
+  positive_source_port_id: z171.string().optional(),
+  negative_source_port_id: z171.string().optional(),
+  positive_source_net_id: z171.string().optional(),
+  negative_source_net_id: z171.string().optional(),
   current,
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z170.object({
-  type: z170.literal("simulation_current_source"),
+var simulation_ac_current_source = z171.object({
+  type: z171.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z170.literal(false),
-  terminal1_source_port_id: z170.string().optional(),
-  terminal2_source_port_id: z170.string().optional(),
-  terminal1_source_net_id: z170.string().optional(),
-  terminal2_source_net_id: z170.string().optional(),
+  is_dc_source: z171.literal(false),
+  terminal1_source_port_id: z171.string().optional(),
+  terminal2_source_port_id: z171.string().optional(),
+  terminal1_source_net_id: z171.string().optional(),
+  terminal2_source_net_id: z171.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -3662,58 +3673,58 @@ var simulation_ac_current_source = z170.object({
   ac_magnitude: current.optional(),
   ac_phase: rotation.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z170.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z171.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z172 } from "zod";
+import { z as z173 } from "zod";
 
 // src/simulation/simulation_units.ts
-import { z as z171 } from "zod";
-var simulation_dc_sweep_unit = z171.custom(
+import { z as z172 } from "zod";
+var simulation_dc_sweep_unit = z172.custom(
   (dcSweepUnit) => dcSweepUnit === "V" || dcSweepUnit === "A"
 );
-var simulation_parameter_unit = z171.custom(
+var simulation_parameter_unit = z172.custom(
   (parameterUnit) => parameterUnit === "\u03A9" || parameterUnit === "F" || parameterUnit === "H" || parameterUnit === "V" || parameterUnit === "A"
 );
 
 // src/simulation/simulation_experiment.ts
-var experiment_type = z172.union([
-  z172.literal("spice_dc_sweep"),
-  z172.literal("spice_dc_operating_point"),
-  z172.literal("spice_transient_analysis"),
-  z172.literal("spice_ac_analysis")
+var experiment_type = z173.union([
+  z173.literal("spice_dc_sweep"),
+  z173.literal("spice_dc_operating_point"),
+  z173.literal("spice_transient_analysis"),
+  z173.literal("spice_ac_analysis")
 ]);
-var spice_simulation_options = z172.object({
-  method: z172.enum(["trap", "gear"]).optional(),
-  reltol: z172.union([z172.number(), z172.string()]).optional(),
-  abstol: z172.union([z172.number(), z172.string()]).optional(),
-  vntol: z172.union([z172.number(), z172.string()]).optional()
+var spice_simulation_options = z173.object({
+  method: z173.enum(["trap", "gear"]).optional(),
+  reltol: z173.union([z173.number(), z173.string()]).optional(),
+  abstol: z173.union([z173.number(), z173.string()]).optional(),
+  vntol: z173.union([z173.number(), z173.string()]).optional()
 }).describe("SPICE solver options for a simulation experiment");
-var simulation_experiment = z172.object({
-  type: z172.literal("simulation_experiment"),
+var simulation_experiment = z173.object({
+  type: z173.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z172.string(),
+  name: z173.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional(),
   spice_options: spice_simulation_options.optional(),
-  dc_sweep_voltage_source_id: z172.string().optional(),
-  dc_sweep_current_source_id: z172.string().optional(),
-  dc_sweep_start: z172.number().optional(),
-  dc_sweep_stop: z172.number().optional(),
-  dc_sweep_step: z172.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
+  dc_sweep_voltage_source_id: z173.string().optional(),
+  dc_sweep_current_source_id: z173.string().optional(),
+  dc_sweep_start: z173.number().optional(),
+  dc_sweep_stop: z173.number().optional(),
+  dc_sweep_step: z173.number().refine((dcSweepStep) => dcSweepStep !== 0).optional(),
   dc_sweep_unit: simulation_dc_sweep_unit.optional(),
-  ac_sweep_type: z172.enum(["linear", "decade", "octave"]).optional(),
-  ac_samples_per_interval: z172.number().int().positive().optional(),
-  ac_sample_count: z172.number().int().positive().optional(),
-  ac_start_frequency_hz: z172.number().positive().optional(),
-  ac_stop_frequency_hz: z172.number().positive().optional()
+  ac_sweep_type: z173.enum(["linear", "decade", "octave"]).optional(),
+  ac_samples_per_interval: z173.number().int().positive().optional(),
+  ac_sample_count: z173.number().int().positive().optional(),
+  ac_start_frequency_hz: z173.number().positive().optional(),
+  ac_stop_frequency_hz: z173.number().positive().optional()
 }).superRefine((experiment, context) => {
   if (experiment.experiment_type === "spice_dc_sweep") {
     const requiredFields = [
@@ -3725,7 +3736,7 @@ var simulation_experiment = z172.object({
     for (const field of requiredFields) {
       if (experiment[field] === void 0) {
         context.addIssue({
-          code: z172.ZodIssueCode.custom,
+          code: z173.ZodIssueCode.custom,
           path: [field],
           message: `${field} is required for a DC sweep`
         });
@@ -3735,7 +3746,7 @@ var simulation_experiment = z172.object({
     const hasCurrentSource = experiment.dc_sweep_current_source_id !== void 0;
     if (hasVoltageSource === hasCurrentSource) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["dc_sweep_voltage_source_id"],
         message: "Exactly one DC sweep voltage or current source ID is required"
       });
@@ -3744,35 +3755,35 @@ var simulation_experiment = z172.object({
   if (experiment.experiment_type === "spice_ac_analysis") {
     if (experiment.ac_sweep_type === void 0) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["ac_sweep_type"],
         message: "ac_sweep_type is required for an AC analysis"
       });
     }
     if (experiment.ac_start_frequency_hz === void 0) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["ac_start_frequency_hz"],
         message: "ac_start_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_stop_frequency_hz === void 0) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["ac_stop_frequency_hz"],
         message: "ac_stop_frequency_hz is required for an AC analysis"
       });
     }
     if (experiment.ac_sweep_type === "linear" && experiment.ac_sample_count === void 0) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["ac_sample_count"],
         message: "ac_sample_count is required for a linear AC analysis"
       });
     }
     if ((experiment.ac_sweep_type === "decade" || experiment.ac_sweep_type === "octave") && experiment.ac_samples_per_interval === void 0) {
       context.addIssue({
-        code: z172.ZodIssueCode.custom,
+        code: z173.ZodIssueCode.custom,
         path: ["ac_samples_per_interval"],
         message: "ac_samples_per_interval is required for decade and octave AC analyses"
       });
@@ -3782,87 +3793,87 @@ var simulation_experiment = z172.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z174 } from "zod";
+import { z as z175 } from "zod";
 
 // src/simulation/simulation_parameter_sweep_coordinate.ts
-import { z as z173 } from "zod";
-var simulation_parameter_sweep_coordinate = z173.object({
-  simulation_parameter_sweep_id: z173.string(),
-  sweep_index: z173.number().int().nonnegative(),
-  parameter_value: z173.number(),
+import { z as z174 } from "zod";
+var simulation_parameter_sweep_coordinate = z174.object({
+  simulation_parameter_sweep_id: z174.string(),
+  sweep_index: z174.number().int().nonnegative(),
+  parameter_value: z174.number(),
   parameter_unit: simulation_parameter_unit
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-var simulation_transient_voltage_graph = z174.object({
-  type: z174.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z175.object({
+  type: z175.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z174.string(),
+  simulation_experiment_id: z175.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z174.array(z174.number()).optional(),
-  voltage_levels: z174.array(z174.number()),
-  source_component_id: z174.string().optional(),
-  subcircuit_connectivity_map_key: z174.string().optional(),
+  timestamps_ms: z175.array(z175.number()).optional(),
+  voltage_levels: z175.array(z175.number()),
+  source_component_id: z175.string().optional(),
+  subcircuit_connectivity_map_key: z175.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z174.string().optional(),
-  color: z174.string().optional()
+  name: z175.string().optional(),
+  color: z175.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_current_graph.ts
-import { z as z175 } from "zod";
-var simulation_transient_current_graph = z175.object({
-  type: z175.literal("simulation_transient_current_graph"),
+import { z as z176 } from "zod";
+var simulation_transient_current_graph = z176.object({
+  type: z176.literal("simulation_transient_current_graph"),
   simulation_transient_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_current_graph"
   ),
-  simulation_experiment_id: z175.string(),
+  simulation_experiment_id: z176.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  timestamps_ms: z175.array(z175.number()).optional(),
-  current_levels: z175.array(z175.number()),
-  source_component_id: z175.string().optional(),
-  subcircuit_connectivity_map_key: z175.string().optional(),
+  timestamps_ms: z176.array(z176.number()).optional(),
+  current_levels: z176.array(z176.number()),
+  source_component_id: z176.string().optional(),
+  subcircuit_connectivity_map_key: z176.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z175.string().optional(),
-  color: z175.string().optional()
+  name: z176.string().optional(),
+  color: z176.string().optional()
 }).describe("Stores current measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z176 } from "zod";
-var simulation_switch = z176.object({
-  type: z176.literal("simulation_switch"),
+import { z as z177 } from "zod";
+var simulation_switch = z177.object({
+  type: z177.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z176.string().optional(),
+  source_component_id: z177.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z176.boolean().optional(),
+  starts_closed: z177.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z177 } from "zod";
-var simulation_voltage_probe = z177.object({
-  type: z177.literal("simulation_voltage_probe"),
+import { z as z178 } from "zod";
+var simulation_voltage_probe = z178.object({
+  type: z178.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z177.string().optional(),
-  name: z177.string().optional(),
-  signal_input_source_port_id: z177.string().optional(),
-  signal_input_source_net_id: z177.string().optional(),
-  reference_input_source_port_id: z177.string().optional(),
-  reference_input_source_net_id: z177.string().optional(),
-  subcircuit_id: z177.string().optional(),
-  color: z177.string().optional()
+  source_component_id: z178.string().optional(),
+  name: z178.string().optional(),
+  signal_input_source_port_id: z178.string().optional(),
+  signal_input_source_net_id: z178.string().optional(),
+  reference_input_source_port_id: z178.string().optional(),
+  reference_input_source_net_id: z178.string().optional(),
+  subcircuit_id: z178.string().optional(),
+  color: z178.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -3872,20 +3883,20 @@ var simulation_voltage_probe = z177.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z177.ZodIssueCode.custom,
+        code: z178.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z177.ZodIssueCode.custom,
+          code: z178.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z177.ZodIssueCode.custom,
+          code: z178.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -3893,7 +3904,7 @@ var simulation_voltage_probe = z177.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z177.ZodIssueCode.custom,
+        code: z178.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -3902,20 +3913,20 @@ var simulation_voltage_probe = z177.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_probe.ts
-import { z as z178 } from "zod";
-var simulation_current_probe = z178.object({
-  type: z178.literal("simulation_current_probe"),
+import { z as z179 } from "zod";
+var simulation_current_probe = z179.object({
+  type: z179.literal("simulation_current_probe"),
   simulation_current_probe_id: getZodPrefixedIdWithDefault(
     "simulation_current_probe"
   ),
-  source_component_id: z178.string().optional(),
-  name: z178.string().optional(),
-  positive_source_port_id: z178.string().optional(),
-  negative_source_port_id: z178.string().optional(),
-  positive_source_net_id: z178.string().optional(),
-  negative_source_net_id: z178.string().optional(),
-  subcircuit_id: z178.string().optional(),
-  color: z178.string().optional()
+  source_component_id: z179.string().optional(),
+  name: z179.string().optional(),
+  positive_source_port_id: z179.string().optional(),
+  negative_source_port_id: z179.string().optional(),
+  positive_source_net_id: z179.string().optional(),
+  negative_source_net_id: z179.string().optional(),
+  subcircuit_id: z179.string().optional(),
+  color: z179.string().optional()
 }).describe(
   "Defines a current probe for simulation. It measures current flowing from the positive endpoint to the negative endpoint."
 ).superRefine((data, ctx) => {
@@ -3927,7 +3938,7 @@ var simulation_current_probe = z178.object({
   const hasNets = hasPositiveNet || hasNegativeNet;
   if (hasPorts && hasNets) {
     ctx.addIssue({
-      code: z178.ZodIssueCode.custom,
+      code: z179.ZodIssueCode.custom,
       message: "Cannot mix port and net connections in a current probe."
     });
     return;
@@ -3935,7 +3946,7 @@ var simulation_current_probe = z178.object({
   if (hasPorts) {
     if (!hasPositivePort || !hasNegativePort) {
       ctx.addIssue({
-        code: z178.ZodIssueCode.custom,
+        code: z179.ZodIssueCode.custom,
         message: "Current probe using source ports requires both positive_source_port_id and negative_source_port_id."
       });
     }
@@ -3944,71 +3955,71 @@ var simulation_current_probe = z178.object({
   if (hasNets) {
     if (!hasPositiveNet || !hasNegativeNet) {
       ctx.addIssue({
-        code: z178.ZodIssueCode.custom,
+        code: z179.ZodIssueCode.custom,
         message: "Current probe using source nets requires both positive_source_net_id and negative_source_net_id."
       });
     }
     return;
   }
   ctx.addIssue({
-    code: z178.ZodIssueCode.custom,
+    code: z179.ZodIssueCode.custom,
     message: "A current probe must have either positive/negative source port ids or positive/negative source net ids."
   });
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z179 } from "zod";
+import { z as z180 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z179.literal("simulation_unknown_experiment_error"),
+  type: z180.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z179.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z179.string().optional(),
-  subcircuit_id: z179.string().optional()
+  error_type: z180.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z180.string().optional(),
+  subcircuit_id: z180.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_parameter_sweep.ts
-import { z as z180 } from "zod";
-var simulation_parameter_type = z180.enum([
+import { z as z181 } from "zod";
+var simulation_parameter_type = z181.enum([
   "resistance",
   "capacitance",
   "inductance",
   "voltage",
   "current"
 ]);
-var simulation_parameter_sweep_base = z180.object({
-  type: z180.literal("simulation_parameter_sweep"),
+var simulation_parameter_sweep_base = z181.object({
+  type: z181.literal("simulation_parameter_sweep"),
   simulation_parameter_sweep_id: getZodPrefixedIdWithDefault(
     "simulation_parameter_sweep"
   ),
-  simulation_experiment_id: z180.string(),
-  name: z180.string().optional(),
-  parameter_values: z180.array(z180.number()).min(1),
+  simulation_experiment_id: z181.string(),
+  name: z181.string().optional(),
+  parameter_values: z181.array(z181.number()).min(1),
   parameter_unit: simulation_parameter_unit
 });
-var simulation_parameter_sweep = z180.discriminatedUnion("parameter_type", [
+var simulation_parameter_sweep = z181.discriminatedUnion("parameter_type", [
   simulation_parameter_sweep_base.extend({
-    parameter_type: z180.literal("resistance"),
-    resistor_source_component_id: z180.string()
+    parameter_type: z181.literal("resistance"),
+    resistor_source_component_id: z181.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z180.literal("capacitance"),
-    capacitor_source_component_id: z180.string()
+    parameter_type: z181.literal("capacitance"),
+    capacitor_source_component_id: z181.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z180.literal("inductance"),
-    inductor_source_component_id: z180.string()
+    parameter_type: z181.literal("inductance"),
+    inductor_source_component_id: z181.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z180.literal("voltage"),
-    source_net_id: z180.string()
+    parameter_type: z181.literal("voltage"),
+    source_net_id: z181.string()
   }),
   simulation_parameter_sweep_base.extend({
-    parameter_type: z180.literal("current"),
-    current_source_component_id: z180.string()
+    parameter_type: z181.literal("current"),
+    current_source_component_id: z181.string()
   })
 ]).describe("Repeats a simulation experiment over component parameter values");
 expectTypesMatch(
@@ -4016,52 +4027,52 @@ expectTypesMatch(
 );
 
 // src/simulation/simulation_dc_operating_point_voltage.ts
-import { z as z181 } from "zod";
-var simulation_dc_operating_point_voltage = z181.object({
-  type: z181.literal("simulation_dc_operating_point_voltage"),
+import { z as z182 } from "zod";
+var simulation_dc_operating_point_voltage = z182.object({
+  type: z182.literal("simulation_dc_operating_point_voltage"),
   simulation_dc_operating_point_voltage_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_voltage"
   ),
-  simulation_experiment_id: z181.string(),
+  simulation_experiment_id: z182.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z181.string(),
-  voltage: z181.number(),
-  name: z181.string().optional(),
-  color: z181.string().optional()
+  simulation_voltage_probe_id: z182.string(),
+  voltage: z182.number(),
+  name: z182.string().optional(),
+  color: z182.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_operating_point_current.ts
-import { z as z182 } from "zod";
-var simulation_dc_operating_point_current = z182.object({
-  type: z182.literal("simulation_dc_operating_point_current"),
+import { z as z183 } from "zod";
+var simulation_dc_operating_point_current = z183.object({
+  type: z183.literal("simulation_dc_operating_point_current"),
   simulation_dc_operating_point_current_id: getZodPrefixedIdWithDefault(
     "simulation_dc_operating_point_current"
   ),
-  simulation_experiment_id: z182.string(),
+  simulation_experiment_id: z183.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z182.string(),
-  current: z182.number(),
-  name: z182.string().optional(),
-  color: z182.string().optional()
+  simulation_current_probe_id: z183.string(),
+  current: z183.number(),
+  name: z183.string().optional(),
+  color: z183.string().optional()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_voltage_graph.ts
-import { z as z183 } from "zod";
-var simulation_dc_sweep_voltage_graph = z183.object({
-  type: z183.literal("simulation_dc_sweep_voltage_graph"),
+import { z as z184 } from "zod";
+var simulation_dc_sweep_voltage_graph = z184.object({
+  type: z184.literal("simulation_dc_sweep_voltage_graph"),
   simulation_dc_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z183.string(),
+  simulation_experiment_id: z184.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z183.string(),
-  sweep_values: z183.array(z183.number()),
+  simulation_voltage_probe_id: z184.string(),
+  sweep_values: z184.array(z184.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  voltage_levels: z183.array(z183.number()),
-  name: z183.string().optional(),
-  color: z183.string().optional()
+  voltage_levels: z184.array(z184.number()),
+  name: z184.string().optional(),
+  color: z184.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.voltage_levels.length,
   {
@@ -4071,20 +4082,20 @@ var simulation_dc_sweep_voltage_graph = z183.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_dc_sweep_current_graph.ts
-import { z as z184 } from "zod";
-var simulation_dc_sweep_current_graph = z184.object({
-  type: z184.literal("simulation_dc_sweep_current_graph"),
+import { z as z185 } from "zod";
+var simulation_dc_sweep_current_graph = z185.object({
+  type: z185.literal("simulation_dc_sweep_current_graph"),
   simulation_dc_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_dc_sweep_current_graph"
   ),
-  simulation_experiment_id: z184.string(),
+  simulation_experiment_id: z185.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z184.string(),
-  sweep_values: z184.array(z184.number()),
+  simulation_current_probe_id: z185.string(),
+  sweep_values: z185.array(z185.number()),
   sweep_unit: simulation_dc_sweep_unit,
-  current_levels: z184.array(z184.number()),
-  name: z184.string().optional(),
-  color: z184.string().optional()
+  current_levels: z185.array(z185.number()),
+  name: z185.string().optional(),
+  color: z185.string().optional()
 }).refine(
   (graph) => graph.sweep_values.length === graph.current_levels.length,
   {
@@ -4094,29 +4105,29 @@ var simulation_dc_sweep_current_graph = z184.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-import { z as z186 } from "zod";
+import { z as z187 } from "zod";
 
 // src/simulation/simulation_complex_sample.ts
-import { z as z185 } from "zod";
-var simulation_complex_sample = z185.object({
-  re: z185.number(),
-  im: z185.number()
+import { z as z186 } from "zod";
+var simulation_complex_sample = z186.object({
+  re: z186.number(),
+  im: z186.number()
 });
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_voltage_graph.ts
-var simulation_ac_sweep_voltage_graph = z186.object({
-  type: z186.literal("simulation_ac_sweep_voltage_graph"),
+var simulation_ac_sweep_voltage_graph = z187.object({
+  type: z187.literal("simulation_ac_sweep_voltage_graph"),
   simulation_ac_sweep_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_voltage_graph"
   ),
-  simulation_experiment_id: z186.string(),
+  simulation_experiment_id: z187.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_voltage_probe_id: z186.string(),
-  frequencies_hz: z186.array(z186.number()),
-  complex_voltages: z186.array(simulation_complex_sample),
-  name: z186.string().optional(),
-  color: z186.string().optional()
+  simulation_voltage_probe_id: z187.string(),
+  frequencies_hz: z187.array(z187.number()),
+  complex_voltages: z187.array(simulation_complex_sample),
+  name: z187.string().optional(),
+  color: z187.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_voltages.length,
   {
@@ -4126,19 +4137,19 @@ var simulation_ac_sweep_voltage_graph = z186.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_ac_sweep_current_graph.ts
-import { z as z187 } from "zod";
-var simulation_ac_sweep_current_graph = z187.object({
-  type: z187.literal("simulation_ac_sweep_current_graph"),
+import { z as z188 } from "zod";
+var simulation_ac_sweep_current_graph = z188.object({
+  type: z188.literal("simulation_ac_sweep_current_graph"),
   simulation_ac_sweep_current_graph_id: getZodPrefixedIdWithDefault(
     "simulation_ac_sweep_current_graph"
   ),
-  simulation_experiment_id: z187.string(),
+  simulation_experiment_id: z188.string(),
   simulation_parameter_sweep_coordinate: simulation_parameter_sweep_coordinate.optional(),
-  simulation_current_probe_id: z187.string(),
-  frequencies_hz: z187.array(z187.number()),
-  complex_currents: z187.array(simulation_complex_sample),
-  name: z187.string().optional(),
-  color: z187.string().optional()
+  simulation_current_probe_id: z188.string(),
+  frequencies_hz: z188.array(z188.number()),
+  complex_currents: z188.array(simulation_complex_sample),
+  name: z188.string().optional(),
+  color: z188.string().optional()
 }).refine(
   (graph) => graph.frequencies_hz.length === graph.complex_currents.length,
   {
@@ -4148,52 +4159,52 @@ var simulation_ac_sweep_current_graph = z187.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z188 } from "zod";
-var simulation_op_amp = z188.object({
-  type: z188.literal("simulation_op_amp"),
+import { z as z189 } from "zod";
+var simulation_op_amp = z189.object({
+  type: z189.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z188.string().optional(),
-  inverting_input_source_port_id: z188.string(),
-  non_inverting_input_source_port_id: z188.string(),
-  output_source_port_id: z188.string(),
-  positive_supply_source_port_id: z188.string(),
-  negative_supply_source_port_id: z188.string()
+  source_component_id: z189.string().optional(),
+  inverting_input_source_port_id: z189.string(),
+  non_inverting_input_source_port_id: z189.string(),
+  output_source_port_id: z189.string(),
+  positive_supply_source_port_id: z189.string(),
+  negative_supply_source_port_id: z189.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_spice_subcircuit.ts
-import { z as z189 } from "zod";
-var simulation_spice_subcircuit = z189.object({
-  type: z189.literal("simulation_spice_subcircuit"),
+import { z as z190 } from "zod";
+var simulation_spice_subcircuit = z190.object({
+  type: z190.literal("simulation_spice_subcircuit"),
   simulation_spice_subcircuit_id: getZodPrefixedIdWithDefault(
     "simulation_spice_subcircuit"
   ),
-  source_component_id: z189.string(),
-  spice_pin_to_source_port_map: z189.record(z189.string(), z189.string()),
-  subcircuit_source: z189.string()
+  source_component_id: z190.string(),
+  spice_pin_to_source_port_map: z190.record(z190.string(), z190.string()),
+  subcircuit_source: z190.string()
 }).describe("Defines a custom SPICE subcircuit model for simulation");
 expectTypesMatch(
   true
 );
 
 // src/simulation/simulation_oscilloscope_trace.ts
-import { z as z190 } from "zod";
+import { z as z191 } from "zod";
 var hasValue = (value) => value !== void 0;
-var simulation_oscilloscope_trace = z190.object({
-  type: z190.literal("simulation_oscilloscope_trace"),
+var simulation_oscilloscope_trace = z191.object({
+  type: z191.literal("simulation_oscilloscope_trace"),
   simulation_oscilloscope_trace_id: getZodPrefixedIdWithDefault(
     "simulation_oscilloscope_trace"
   ),
-  simulation_transient_voltage_graph_id: z190.string().optional(),
-  simulation_transient_current_graph_id: z190.string().optional(),
-  simulation_voltage_probe_id: z190.string().optional(),
-  simulation_current_probe_id: z190.string().optional(),
-  display_name: z190.string().optional(),
-  color: z190.string().optional(),
-  display_center_value: z190.number().optional(),
-  display_center_offset_divs: z190.number().optional(),
-  volts_per_div: z190.number().positive().optional(),
-  amps_per_div: z190.number().positive().optional()
+  simulation_transient_voltage_graph_id: z191.string().optional(),
+  simulation_transient_current_graph_id: z191.string().optional(),
+  simulation_voltage_probe_id: z191.string().optional(),
+  simulation_current_probe_id: z191.string().optional(),
+  display_name: z191.string().optional(),
+  color: z191.string().optional(),
+  display_center_value: z191.number().optional(),
+  display_center_offset_divs: z191.number().optional(),
+  volts_per_div: z191.number().positive().optional(),
+  amps_per_div: z191.number().positive().optional()
 }).describe(
   "Defines how a simulation measurement is rendered as an oscilloscope-style trace."
 ).superRefine((data, ctx) => {
@@ -4207,19 +4218,19 @@ var simulation_oscilloscope_trace = z190.object({
   ].filter(hasValue).length;
   if (voltageReferences + currentReferences !== 1) {
     ctx.addIssue({
-      code: z190.ZodIssueCode.custom,
+      code: z191.ZodIssueCode.custom,
       message: "An oscilloscope trace must reference exactly one voltage graph, current graph, voltage probe, or current probe."
     });
   }
   if (voltageReferences > 0 && data.amps_per_div !== void 0) {
     ctx.addIssue({
-      code: z190.ZodIssueCode.custom,
+      code: z191.ZodIssueCode.custom,
       message: "Voltage oscilloscope traces must use volts_per_div, not amps_per_div."
     });
   }
   if (currentReferences > 0 && data.volts_per_div !== void 0) {
     ctx.addIssue({
-      code: z190.ZodIssueCode.custom,
+      code: z191.ZodIssueCode.custom,
       message: "Current oscilloscope traces must use amps_per_div, not volts_per_div."
     });
   }
@@ -4227,8 +4238,8 @@ var simulation_oscilloscope_trace = z190.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z191 } from "zod";
-var any_circuit_element = z191.union([
+import { z as z192 } from "zod";
+var any_circuit_element = z192.union([
   source_trace,
   source_port,
   source_component_internal_connection,
@@ -4307,6 +4318,7 @@ var any_circuit_element = z191.union([
   pcb_trace_error,
   pcb_trace_missing_error,
   pcb_placement_error,
+  pcb_packing_error,
   pcb_panelization_placement_error,
   pcb_port_not_matched_error,
   pcb_port_not_connected_error,
@@ -4481,6 +4493,7 @@ export {
   pcb_note_path,
   pcb_note_rect,
   pcb_note_text,
+  pcb_packing_error,
   pcb_pad_pad_clearance_error,
   pcb_pad_trace_clearance_error,
   pcb_panel,