circuit-json 0.0.412 → 0.0.413

package/dist/index.mjs

@@ -3292,73 +3292,114 @@ var pcb_via_clearance_error = base_circuit_json_error.extend({
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
-// src/pcb/pcb_courtyard_rect.ts
+// src/pcb/pcb_pad_pad_clearance_error.ts
 import { z as z149 } from "zod";
-var pcb_courtyard_rect = z149.object({
-  type: z149.literal("pcb_courtyard_rect"),
+var pcb_pad_pad_clearance_error = base_circuit_json_error.extend({
+  type: z149.literal("pcb_pad_pad_clearance_error"),
+  pcb_pad_pad_clearance_error_id: getZodPrefixedIdWithDefault(
+    "pcb_pad_pad_clearance_error"
+  ),
+  error_type: z149.literal("pcb_pad_pad_clearance_error").default("pcb_pad_pad_clearance_error"),
+  pcb_pad_ids: z149.array(z149.string()).min(2),
+  minimum_clearance: distance.optional(),
+  actual_clearance: distance.optional(),
+  center: z149.object({
+    x: z149.number().optional(),
+    y: z149.number().optional()
+  }).optional(),
+  subcircuit_id: z149.string().optional()
+}).describe("Error emitted when pads are closer than the allowed clearance");
+expectTypesMatch(true);
+
+// src/pcb/pcb_pad_trace_clearance_error.ts
+import { z as z150 } from "zod";
+var pcb_pad_trace_clearance_error = base_circuit_json_error.extend({
+  type: z150.literal("pcb_pad_trace_clearance_error"),
+  pcb_pad_trace_clearance_error_id: getZodPrefixedIdWithDefault(
+    "pcb_pad_trace_clearance_error"
+  ),
+  error_type: z150.literal("pcb_pad_trace_clearance_error").default("pcb_pad_trace_clearance_error"),
+  pcb_pad_id: z150.string(),
+  pcb_trace_id: z150.string(),
+  minimum_clearance: distance.optional(),
+  actual_clearance: distance.optional(),
+  center: z150.object({
+    x: z150.number().optional(),
+    y: z150.number().optional()
+  }).optional(),
+  subcircuit_id: z150.string().optional()
+}).describe("Error emitted when a pad and trace are closer than allowed clearance");
+expectTypesMatch(
+  true
+);
+
+// src/pcb/pcb_courtyard_rect.ts
+import { z as z151 } from "zod";
+var pcb_courtyard_rect = z151.object({
+  type: z151.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z149.string(),
-  pcb_group_id: z149.string().optional(),
-  subcircuit_id: z149.string().optional(),
+  pcb_component_id: z151.string(),
+  pcb_group_id: z151.string().optional(),
+  subcircuit_id: z151.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   ccw_rotation: rotation.optional(),
-  color: z149.string().optional()
+  color: z151.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z150 } from "zod";
-var pcb_courtyard_outline = z150.object({
-  type: z150.literal("pcb_courtyard_outline"),
+import { z as z152 } from "zod";
+var pcb_courtyard_outline = z152.object({
+  type: z152.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z150.string(),
-  pcb_group_id: z150.string().optional(),
-  subcircuit_id: z150.string().optional(),
+  pcb_component_id: z152.string(),
+  pcb_group_id: z152.string().optional(),
+  subcircuit_id: z152.string().optional(),
   layer: visible_layer,
-  outline: z150.array(point).min(2)
+  outline: z152.array(point).min(2)
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z151 } from "zod";
-var pcb_courtyard_polygon = z151.object({
-  type: z151.literal("pcb_courtyard_polygon"),
+import { z as z153 } from "zod";
+var pcb_courtyard_polygon = z153.object({
+  type: z153.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z151.string(),
-  pcb_group_id: z151.string().optional(),
-  subcircuit_id: z151.string().optional(),
+  pcb_component_id: z153.string(),
+  pcb_group_id: z153.string().optional(),
+  subcircuit_id: z153.string().optional(),
   layer: visible_layer,
-  points: z151.array(point).min(3),
-  color: z151.string().optional()
+  points: z153.array(point).min(3),
+  color: z153.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_circle.ts
-import { z as z152 } from "zod";
-var pcb_courtyard_circle = z152.object({
-  type: z152.literal("pcb_courtyard_circle"),
+import { z as z154 } from "zod";
+var pcb_courtyard_circle = z154.object({
+  type: z154.literal("pcb_courtyard_circle"),
   pcb_courtyard_circle_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_circle"
   ),
-  pcb_component_id: z152.string(),
-  pcb_group_id: z152.string().optional(),
-  subcircuit_id: z152.string().optional(),
+  pcb_component_id: z154.string(),
+  pcb_group_id: z154.string().optional(),
+  subcircuit_id: z154.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
-  color: z152.string().optional()
+  color: z154.string().optional()
 }).describe("Defines a courtyard circle on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z153 } from "zod";
+import { z as z155 } from "zod";
 
 // src/cad/cad_model_conventions.ts
 var cad_model_formats = [
@@ -3389,48 +3430,48 @@ var cadModelDefaultDirectionMap = {
 };
 
 // src/cad/cad_component.ts
-var cad_component = z153.object({
-  type: z153.literal("cad_component"),
-  cad_component_id: z153.string(),
-  pcb_component_id: z153.string(),
-  source_component_id: z153.string(),
+var cad_component = z155.object({
+  type: z155.literal("cad_component"),
+  cad_component_id: z155.string(),
+  pcb_component_id: z155.string(),
+  source_component_id: z155.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z153.string().optional(),
+  subcircuit_id: z155.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z153.string().optional(),
-  model_obj_url: z153.string().optional(),
-  model_stl_url: z153.string().optional(),
-  model_3mf_url: z153.string().optional(),
-  model_gltf_url: z153.string().optional(),
-  model_glb_url: z153.string().optional(),
-  model_step_url: z153.string().optional(),
-  model_wrl_url: z153.string().optional(),
+  footprinter_string: z155.string().optional(),
+  model_obj_url: z155.string().optional(),
+  model_stl_url: z155.string().optional(),
+  model_3mf_url: z155.string().optional(),
+  model_gltf_url: z155.string().optional(),
+  model_glb_url: z155.string().optional(),
+  model_step_url: z155.string().optional(),
+  model_wrl_url: z155.string().optional(),
   model_asset: asset.optional(),
-  model_unit_to_mm_scale_factor: z153.number().optional(),
-  model_board_normal_direction: z153.enum(cad_model_axis_directions).optional().describe(
+  model_unit_to_mm_scale_factor: z155.number().optional(),
+  model_board_normal_direction: z155.enum(cad_model_axis_directions).optional().describe(
     `The direction in the model's coordinate space that is considered "up" or "coming out of the board surface"`
   ),
   model_origin_position: point3.optional(),
-  model_origin_alignment: z153.enum([
+  model_origin_alignment: z155.enum([
     "unknown",
     "center",
     "center_of_component_on_board_surface",
     "bottom_center_of_component"
   ]).optional(),
-  model_object_fit: z153.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
-  model_jscad: z153.any().optional(),
-  show_as_translucent_model: z153.boolean().optional(),
-  anchor_alignment: z153.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
+  model_object_fit: z155.enum(["contain_within_bounds", "fill_bounds"]).optional().default("contain_within_bounds"),
+  model_jscad: z155.any().optional(),
+  show_as_translucent_model: z155.boolean().optional(),
+  anchor_alignment: z155.enum(["center", "center_of_component_on_board_surface"]).optional().default("center")
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z154 } from "zod";
-var wave_shape = z154.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z154.union([z154.string(), z154.number()]).transform((val) => {
+import { z as z156 } from "zod";
+var wave_shape = z156.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z156.union([z156.string(), z156.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3439,30 +3480,30 @@ var percentage = z154.union([z154.string(), z154.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z154.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z156.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z154.object({
-  type: z154.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z156.object({
+  type: z156.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z154.literal(true).optional().default(true),
-  positive_source_port_id: z154.string().optional(),
-  negative_source_port_id: z154.string().optional(),
-  positive_source_net_id: z154.string().optional(),
-  negative_source_net_id: z154.string().optional(),
+  is_dc_source: z156.literal(true).optional().default(true),
+  positive_source_port_id: z156.string().optional(),
+  negative_source_port_id: z156.string().optional(),
+  positive_source_net_id: z156.string().optional(),
+  negative_source_net_id: z156.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z154.object({
-  type: z154.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z156.object({
+  type: z156.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z154.literal(false),
-  terminal1_source_port_id: z154.string().optional(),
-  terminal2_source_port_id: z154.string().optional(),
-  terminal1_source_net_id: z154.string().optional(),
-  terminal2_source_net_id: z154.string().optional(),
+  is_dc_source: z156.literal(false),
+  terminal1_source_port_id: z156.string().optional(),
+  terminal2_source_port_id: z156.string().optional(),
+  terminal1_source_net_id: z156.string().optional(),
+  terminal2_source_net_id: z156.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -3470,14 +3511,14 @@ var simulation_ac_voltage_source = z154.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z154.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z156.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z155 } from "zod";
-var percentage2 = z155.union([z155.string(), z155.number()]).transform((val) => {
+import { z as z157 } from "zod";
+var percentage2 = z157.union([z157.string(), z157.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3486,30 +3527,30 @@ var percentage2 = z155.union([z155.string(), z155.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z155.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z157.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z155.object({
-  type: z155.literal("simulation_current_source"),
+var simulation_dc_current_source = z157.object({
+  type: z157.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z155.literal(true).optional().default(true),
-  positive_source_port_id: z155.string().optional(),
-  negative_source_port_id: z155.string().optional(),
-  positive_source_net_id: z155.string().optional(),
-  negative_source_net_id: z155.string().optional(),
+  is_dc_source: z157.literal(true).optional().default(true),
+  positive_source_port_id: z157.string().optional(),
+  negative_source_port_id: z157.string().optional(),
+  positive_source_net_id: z157.string().optional(),
+  negative_source_net_id: z157.string().optional(),
   current
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z155.object({
-  type: z155.literal("simulation_current_source"),
+var simulation_ac_current_source = z157.object({
+  type: z157.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z155.literal(false),
-  terminal1_source_port_id: z155.string().optional(),
-  terminal2_source_port_id: z155.string().optional(),
-  terminal1_source_net_id: z155.string().optional(),
-  terminal2_source_net_id: z155.string().optional(),
+  is_dc_source: z157.literal(false),
+  terminal1_source_port_id: z157.string().optional(),
+  terminal2_source_port_id: z157.string().optional(),
+  terminal1_source_net_id: z157.string().optional(),
+  terminal2_source_net_id: z157.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -3517,25 +3558,25 @@ var simulation_ac_current_source = z155.object({
   phase: rotation.optional(),
   duty_cycle: percentage2.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z155.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z157.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z156 } from "zod";
-var experiment_type = z156.union([
-  z156.literal("spice_dc_sweep"),
-  z156.literal("spice_dc_operating_point"),
-  z156.literal("spice_transient_analysis"),
-  z156.literal("spice_ac_analysis")
+import { z as z158 } from "zod";
+var experiment_type = z158.union([
+  z158.literal("spice_dc_sweep"),
+  z158.literal("spice_dc_operating_point"),
+  z158.literal("spice_transient_analysis"),
+  z158.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z156.object({
-  type: z156.literal("simulation_experiment"),
+var simulation_experiment = z158.object({
+  type: z158.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z156.string(),
+  name: z158.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
@@ -3544,53 +3585,53 @@ var simulation_experiment = z156.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z157 } from "zod";
-var simulation_transient_voltage_graph = z157.object({
-  type: z157.literal("simulation_transient_voltage_graph"),
+import { z as z159 } from "zod";
+var simulation_transient_voltage_graph = z159.object({
+  type: z159.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z157.string(),
-  timestamps_ms: z157.array(z157.number()).optional(),
-  voltage_levels: z157.array(z157.number()),
-  source_component_id: z157.string().optional(),
-  subcircuit_connectivity_map_key: z157.string().optional(),
+  simulation_experiment_id: z159.string(),
+  timestamps_ms: z159.array(z159.number()).optional(),
+  voltage_levels: z159.array(z159.number()),
+  source_component_id: z159.string().optional(),
+  subcircuit_connectivity_map_key: z159.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z157.string().optional(),
-  color: z157.string().optional()
+  name: z159.string().optional(),
+  color: z159.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z158 } from "zod";
-var simulation_switch = z158.object({
-  type: z158.literal("simulation_switch"),
+import { z as z160 } from "zod";
+var simulation_switch = z160.object({
+  type: z160.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z158.string().optional(),
+  source_component_id: z160.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z158.boolean().optional(),
+  starts_closed: z160.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z159 } from "zod";
-var simulation_voltage_probe = z159.object({
-  type: z159.literal("simulation_voltage_probe"),
+import { z as z161 } from "zod";
+var simulation_voltage_probe = z161.object({
+  type: z161.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z159.string().optional(),
-  name: z159.string().optional(),
-  signal_input_source_port_id: z159.string().optional(),
-  signal_input_source_net_id: z159.string().optional(),
-  reference_input_source_port_id: z159.string().optional(),
-  reference_input_source_net_id: z159.string().optional(),
-  subcircuit_id: z159.string().optional(),
-  color: z159.string().optional()
+  source_component_id: z161.string().optional(),
+  name: z161.string().optional(),
+  signal_input_source_port_id: z161.string().optional(),
+  signal_input_source_net_id: z161.string().optional(),
+  reference_input_source_port_id: z161.string().optional(),
+  reference_input_source_net_id: z161.string().optional(),
+  subcircuit_id: z161.string().optional(),
+  color: z161.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -3600,20 +3641,20 @@ var simulation_voltage_probe = z159.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z159.ZodIssueCode.custom,
+        code: z161.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z159.ZodIssueCode.custom,
+          code: z161.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z159.ZodIssueCode.custom,
+          code: z161.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -3621,7 +3662,7 @@ var simulation_voltage_probe = z159.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z159.ZodIssueCode.custom,
+        code: z161.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -3630,35 +3671,35 @@ var simulation_voltage_probe = z159.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z160 } from "zod";
+import { z as z162 } from "zod";
 var simulation_unknown_experiment_error = base_circuit_json_error.extend({
-  type: z160.literal("simulation_unknown_experiment_error"),
+  type: z162.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z160.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  simulation_experiment_id: z160.string().optional(),
-  subcircuit_id: z160.string().optional()
+  error_type: z162.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  simulation_experiment_id: z162.string().optional(),
+  subcircuit_id: z162.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/simulation/simulation_op_amp.ts
-import { z as z161 } from "zod";
-var simulation_op_amp = z161.object({
-  type: z161.literal("simulation_op_amp"),
+import { z as z163 } from "zod";
+var simulation_op_amp = z163.object({
+  type: z163.literal("simulation_op_amp"),
   simulation_op_amp_id: getZodPrefixedIdWithDefault("simulation_op_amp"),
-  source_component_id: z161.string().optional(),
-  inverting_input_source_port_id: z161.string(),
-  non_inverting_input_source_port_id: z161.string(),
-  output_source_port_id: z161.string(),
-  positive_supply_source_port_id: z161.string(),
-  negative_supply_source_port_id: z161.string()
+  source_component_id: z163.string().optional(),
+  inverting_input_source_port_id: z163.string(),
+  non_inverting_input_source_port_id: z163.string(),
+  output_source_port_id: z163.string(),
+  positive_supply_source_port_id: z163.string(),
+  negative_supply_source_port_id: z163.string()
 }).describe("Defines a simple ideal operational amplifier for simulation");
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z162 } from "zod";
-var any_circuit_element = z162.union([
+import { z as z164 } from "zod";
+var any_circuit_element = z164.union([
   source_trace,
   source_port,
   source_component_internal_connection,
@@ -3734,6 +3775,8 @@ var any_circuit_element = z162.union([
   pcb_port_not_matched_error,
   pcb_port_not_connected_error,
   pcb_via_clearance_error,
+  pcb_pad_pad_clearance_error,
+  pcb_pad_trace_clearance_error,
   pcb_fabrication_note_path,
   pcb_fabrication_note_text,
   pcb_fabrication_note_rect,
@@ -3884,6 +3927,8 @@ export {
   pcb_note_path,
   pcb_note_rect,
   pcb_note_text,
+  pcb_pad_pad_clearance_error,
+  pcb_pad_trace_clearance_error,
   pcb_panel,
   pcb_panelization_placement_error,
   pcb_placement_error,