circuit-json 0.0.345 → 0.0.346

package/dist/index.mjs

@@ -320,12 +320,32 @@ var ninePointAnchor = z6.enum([
 ]);
 expectTypesMatch(true);
 
+// src/common/PcbRenderLayer.ts
+import { z as z7 } from "zod";
+var pcbRenderLayer = z7.enum([
+  "top_silkscreen",
+  "bottom_silkscreen",
+  "top_copper",
+  "bottom_copper",
+  "top_soldermask",
+  "bottom_soldermask",
+  "top_fabrication_note",
+  "bottom_fabrication_note",
+  "inner1_copper",
+  "inner2_copper",
+  "inner3_copper",
+  "inner4_copper",
+  "inner5_copper",
+  "inner6_copper"
+]);
+expectTypesMatch(true);
+
 // src/source/source_simple_capacitor.ts
-import { z as z9 } from "zod";
+import { z as z10 } from "zod";
 
 // src/pcb/properties/supplier_name.ts
-import { z as z7 } from "zod";
-var supplier_name = z7.enum([
+import { z as z8 } from "zod";
+var supplier_name = z8.enum([
   "jlcpcb",
   "macrofab",
   "pcbway",
@@ -336,126 +356,126 @@ var supplier_name = z7.enum([
 expectTypesMatch(true);
 
 // src/source/base/source_component_base.ts
-import { z as z8 } from "zod";
-var source_component_base = z8.object({
-  type: z8.literal("source_component"),
-  ftype: z8.string().optional(),
-  source_component_id: z8.string(),
-  name: z8.string(),
-  manufacturer_part_number: z8.string().optional(),
-  supplier_part_numbers: z8.record(supplier_name, z8.array(z8.string())).optional(),
-  display_value: z8.string().optional(),
-  are_pins_interchangeable: z8.boolean().optional(),
-  internally_connected_source_port_ids: z8.array(z8.array(z8.string())).optional(),
-  source_group_id: z8.string().optional(),
-  subcircuit_id: z8.string().optional()
+import { z as z9 } from "zod";
+var source_component_base = z9.object({
+  type: z9.literal("source_component"),
+  ftype: z9.string().optional(),
+  source_component_id: z9.string(),
+  name: z9.string(),
+  manufacturer_part_number: z9.string().optional(),
+  supplier_part_numbers: z9.record(supplier_name, z9.array(z9.string())).optional(),
+  display_value: z9.string().optional(),
+  are_pins_interchangeable: z9.boolean().optional(),
+  internally_connected_source_port_ids: z9.array(z9.array(z9.string())).optional(),
+  source_group_id: z9.string().optional(),
+  subcircuit_id: z9.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_capacitor.ts
 var source_simple_capacitor = source_component_base.extend({
-  ftype: z9.literal("simple_capacitor"),
+  ftype: z10.literal("simple_capacitor"),
   capacitance,
   max_voltage_rating: voltage.optional(),
-  display_capacitance: z9.string().optional(),
+  display_capacitance: z10.string().optional(),
   max_decoupling_trace_length: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_resistor.ts
-import { z as z10 } from "zod";
+import { z as z11 } from "zod";
 var source_simple_resistor = source_component_base.extend({
-  ftype: z10.literal("simple_resistor"),
+  ftype: z11.literal("simple_resistor"),
   resistance,
-  display_resistance: z10.string().optional()
+  display_resistance: z11.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_diode.ts
-import { z as z11 } from "zod";
+import { z as z12 } from "zod";
 var source_simple_diode = source_component_base.extend({
-  ftype: z11.literal("simple_diode")
+  ftype: z12.literal("simple_diode")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_fiducial.ts
-import { z as z12 } from "zod";
+import { z as z13 } from "zod";
 var source_simple_fiducial = source_component_base.extend({
-  ftype: z12.literal("simple_fiducial")
+  ftype: z13.literal("simple_fiducial")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_led.ts
-import { z as z13 } from "zod";
+import { z as z14 } from "zod";
 var source_simple_led = source_simple_diode.extend({
-  ftype: z13.literal("simple_led"),
-  color: z13.string().optional(),
-  wavelength: z13.string().optional()
+  ftype: z14.literal("simple_led"),
+  color: z14.string().optional(),
+  wavelength: z14.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_ground.ts
-import { z as z14 } from "zod";
+import { z as z15 } from "zod";
 var source_simple_ground = source_component_base.extend({
-  ftype: z14.literal("simple_ground")
+  ftype: z15.literal("simple_ground")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_chip.ts
-import { z as z15 } from "zod";
+import { z as z16 } from "zod";
 var source_simple_chip = source_component_base.extend({
-  ftype: z15.literal("simple_chip")
+  ftype: z16.literal("simple_chip")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_power_source.ts
-import { z as z16 } from "zod";
+import { z as z17 } from "zod";
 var source_simple_power_source = source_component_base.extend({
-  ftype: z16.literal("simple_power_source"),
+  ftype: z17.literal("simple_power_source"),
   voltage
 });
 expectTypesMatch(true);
 
 // src/source/any_source_component.ts
-import { z as z38 } from "zod";
+import { z as z39 } from "zod";
 
 // src/source/source_simple_fuse.ts
-import { z as z17 } from "zod";
+import { z as z18 } from "zod";
 var source_simple_fuse = source_component_base.extend({
-  ftype: z17.literal("simple_fuse"),
-  current_rating_amps: z17.number().describe("Nominal current in amps the fuse is rated for"),
-  voltage_rating_volts: z17.number().describe("Voltage rating in volts, e.g. \xB15V would be 5")
+  ftype: z18.literal("simple_fuse"),
+  current_rating_amps: z18.number().describe("Nominal current in amps the fuse is rated for"),
+  voltage_rating_volts: z18.number().describe("Voltage rating in volts, e.g. \xB15V would be 5")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_battery.ts
-import { z as z18 } from "zod";
+import { z as z19 } from "zod";
 var source_simple_battery = source_component_base.extend({
-  ftype: z18.literal("simple_battery"),
+  ftype: z19.literal("simple_battery"),
   capacity: battery_capacity
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_inductor.ts
-import { z as z19 } from "zod";
+import { z as z20 } from "zod";
 var source_simple_inductor = source_component_base.extend({
-  ftype: z19.literal("simple_inductor"),
+  ftype: z20.literal("simple_inductor"),
   inductance,
-  max_current_rating: z19.number().optional()
+  max_current_rating: z20.number().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_push_button.ts
-import { z as z20 } from "zod";
+import { z as z21 } from "zod";
 var source_simple_push_button = source_component_base.extend({
-  ftype: z20.literal("simple_push_button")
+  ftype: z21.literal("simple_push_button")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_potentiometer.ts
-import { z as z21 } from "zod";
+import { z as z22 } from "zod";
 var source_simple_potentiometer = source_component_base.extend({
-  ftype: z21.literal("simple_potentiometer"),
+  ftype: z22.literal("simple_potentiometer"),
   max_resistance: resistance
 });
 expectTypesMatch(
@@ -463,34 +483,34 @@ expectTypesMatch(
 );
 
 // src/source/source_simple_crystal.ts
-import { z as z22 } from "zod";
+import { z as z23 } from "zod";
 var source_simple_crystal = source_component_base.extend({
-  ftype: z22.literal("simple_crystal"),
-  frequency: z22.number().describe("Frequency in Hz"),
-  load_capacitance: z22.number().optional().describe("Load capacitance in pF")
+  ftype: z23.literal("simple_crystal"),
+  frequency: z23.number().describe("Frequency in Hz"),
+  load_capacitance: z23.number().optional().describe("Load capacitance in pF")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_pin_header.ts
-import { z as z23 } from "zod";
+import { z as z24 } from "zod";
 var source_simple_pin_header = source_component_base.extend({
-  ftype: z23.literal("simple_pin_header"),
-  pin_count: z23.number(),
-  gender: z23.enum(["male", "female"]).optional().default("male")
+  ftype: z24.literal("simple_pin_header"),
+  pin_count: z24.number(),
+  gender: z24.enum(["male", "female"]).optional().default("male")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_pinout.ts
-import { z as z24 } from "zod";
+import { z as z25 } from "zod";
 var source_simple_pinout = source_component_base.extend({
-  ftype: z24.literal("simple_pinout")
+  ftype: z25.literal("simple_pinout")
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_resonator.ts
-import { z as z25 } from "zod";
+import { z as z26 } from "zod";
 var source_simple_resonator = source_component_base.extend({
-  ftype: z25.literal("simple_resonator"),
+  ftype: z26.literal("simple_resonator"),
   load_capacitance: capacitance,
   equivalent_series_resistance: resistance.optional(),
   frequency
@@ -498,158 +518,158 @@ var source_simple_resonator = source_component_base.extend({
 expectTypesMatch(true);
 
 // src/source/source_simple_transistor.ts
-import { z as z26 } from "zod";
+import { z as z27 } from "zod";
 var source_simple_transistor = source_component_base.extend({
-  ftype: z26.literal("simple_transistor"),
-  transistor_type: z26.enum(["npn", "pnp"])
+  ftype: z27.literal("simple_transistor"),
+  transistor_type: z27.enum(["npn", "pnp"])
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_test_point.ts
-import { z as z27 } from "zod";
+import { z as z28 } from "zod";
 var source_simple_test_point = source_component_base.extend({
-  ftype: z27.literal("simple_test_point"),
-  footprint_variant: z27.enum(["pad", "through_hole"]).optional(),
-  pad_shape: z27.enum(["rect", "circle"]).optional(),
-  pad_diameter: z27.union([z27.number(), z27.string()]).optional(),
-  hole_diameter: z27.union([z27.number(), z27.string()]).optional(),
-  width: z27.union([z27.number(), z27.string()]).optional(),
-  height: z27.union([z27.number(), z27.string()]).optional()
+  ftype: z28.literal("simple_test_point"),
+  footprint_variant: z28.enum(["pad", "through_hole"]).optional(),
+  pad_shape: z28.enum(["rect", "circle"]).optional(),
+  pad_diameter: z28.union([z28.number(), z28.string()]).optional(),
+  hole_diameter: z28.union([z28.number(), z28.string()]).optional(),
+  width: z28.union([z28.number(), z28.string()]).optional(),
+  height: z28.union([z28.number(), z28.string()]).optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_mosfet.ts
-import { z as z28 } from "zod";
+import { z as z29 } from "zod";
 var source_simple_mosfet = source_component_base.extend({
-  ftype: z28.literal("simple_mosfet"),
-  channel_type: z28.enum(["n", "p"]),
-  mosfet_mode: z28.enum(["enhancement", "depletion"])
+  ftype: z29.literal("simple_mosfet"),
+  channel_type: z29.enum(["n", "p"]),
+  mosfet_mode: z29.enum(["enhancement", "depletion"])
 });
 expectTypesMatch(true);
 
 // src/source/source_simple_switch.ts
-import { z as z29 } from "zod";
+import { z as z30 } from "zod";
 var source_simple_switch = source_component_base.extend({
-  ftype: z29.literal("simple_switch")
+  ftype: z30.literal("simple_switch")
 });
 expectTypesMatch(true);
 
 // src/source/source_project_metadata.ts
-import { z as z30 } from "zod";
-var source_project_metadata = z30.object({
-  type: z30.literal("source_project_metadata"),
-  name: z30.string().optional(),
-  software_used_string: z30.string().optional(),
-  project_url: z30.string().optional(),
+import { z as z31 } from "zod";
+var source_project_metadata = z31.object({
+  type: z31.literal("source_project_metadata"),
+  name: z31.string().optional(),
+  software_used_string: z31.string().optional(),
+  project_url: z31.string().optional(),
   created_at: timestamp.optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_missing_property_error.ts
-import { z as z31 } from "zod";
-var source_missing_property_error = z31.object({
-  type: z31.literal("source_missing_property_error"),
+import { z as z32 } from "zod";
+var source_missing_property_error = z32.object({
+  type: z32.literal("source_missing_property_error"),
   source_missing_property_error_id: getZodPrefixedIdWithDefault(
     "source_missing_property_error"
   ),
-  source_component_id: z31.string(),
-  property_name: z31.string(),
-  subcircuit_id: z31.string().optional(),
-  error_type: z31.literal("source_missing_property_error").default("source_missing_property_error"),
-  message: z31.string()
+  source_component_id: z32.string(),
+  property_name: z32.string(),
+  subcircuit_id: z32.string().optional(),
+  error_type: z32.literal("source_missing_property_error").default("source_missing_property_error"),
+  message: z32.string()
 }).describe("The source code is missing a property");
 expectTypesMatch(true);
 
 // src/source/source_failed_to_create_component_error.ts
-import { z as z32 } from "zod";
-var source_failed_to_create_component_error = z32.object({
-  type: z32.literal("source_failed_to_create_component_error"),
+import { z as z33 } from "zod";
+var source_failed_to_create_component_error = z33.object({
+  type: z33.literal("source_failed_to_create_component_error"),
   source_failed_to_create_component_error_id: getZodPrefixedIdWithDefault(
     "source_failed_to_create_component_error"
   ),
-  error_type: z32.literal("source_failed_to_create_component_error").default("source_failed_to_create_component_error"),
-  component_name: z32.string().optional(),
-  subcircuit_id: z32.string().optional(),
-  parent_source_component_id: z32.string().optional(),
-  message: z32.string(),
-  pcb_center: z32.object({
-    x: z32.number().optional(),
-    y: z32.number().optional()
+  error_type: z33.literal("source_failed_to_create_component_error").default("source_failed_to_create_component_error"),
+  component_name: z33.string().optional(),
+  subcircuit_id: z33.string().optional(),
+  parent_source_component_id: z33.string().optional(),
+  message: z33.string(),
+  pcb_center: z33.object({
+    x: z33.number().optional(),
+    y: z33.number().optional()
   }).optional(),
-  schematic_center: z32.object({
-    x: z32.number().optional(),
-    y: z32.number().optional()
+  schematic_center: z33.object({
+    x: z33.number().optional(),
+    y: z33.number().optional()
   }).optional()
 }).describe("Error emitted when a component fails to be constructed");
 expectTypesMatch(true);
 
 // src/source/source_trace_not_connected_error.ts
-import { z as z33 } from "zod";
-var source_trace_not_connected_error = z33.object({
-  type: z33.literal("source_trace_not_connected_error"),
+import { z as z34 } from "zod";
+var source_trace_not_connected_error = z34.object({
+  type: z34.literal("source_trace_not_connected_error"),
   source_trace_not_connected_error_id: getZodPrefixedIdWithDefault(
     "source_trace_not_connected_error"
   ),
-  error_type: z33.literal("source_trace_not_connected_error").default("source_trace_not_connected_error"),
-  message: z33.string(),
-  subcircuit_id: z33.string().optional(),
-  source_group_id: z33.string().optional(),
-  source_trace_id: z33.string().optional(),
-  connected_source_port_ids: z33.array(z33.string()).optional(),
-  selectors_not_found: z33.array(z33.string()).optional()
+  error_type: z34.literal("source_trace_not_connected_error").default("source_trace_not_connected_error"),
+  message: z34.string(),
+  subcircuit_id: z34.string().optional(),
+  source_group_id: z34.string().optional(),
+  source_trace_id: z34.string().optional(),
+  connected_source_port_ids: z34.array(z34.string()).optional(),
+  selectors_not_found: z34.array(z34.string()).optional()
 }).describe("Occurs when a source trace selector does not match any ports");
 expectTypesMatch(true);
 
 // src/source/source_property_ignored_warning.ts
-import { z as z34 } from "zod";
-var source_property_ignored_warning = z34.object({
-  type: z34.literal("source_property_ignored_warning"),
+import { z as z35 } from "zod";
+var source_property_ignored_warning = z35.object({
+  type: z35.literal("source_property_ignored_warning"),
   source_property_ignored_warning_id: getZodPrefixedIdWithDefault(
     "source_property_ignored_warning"
   ),
-  source_component_id: z34.string(),
-  property_name: z34.string(),
-  subcircuit_id: z34.string().optional(),
-  error_type: z34.literal("source_property_ignored_warning").default("source_property_ignored_warning"),
-  message: z34.string()
+  source_component_id: z35.string(),
+  property_name: z35.string(),
+  subcircuit_id: z35.string().optional(),
+  error_type: z35.literal("source_property_ignored_warning").default("source_property_ignored_warning"),
+  message: z35.string()
 }).describe("The source property was ignored");
 expectTypesMatch(true);
 
 // src/source/source_pin_missing_trace_warning.ts
-import { z as z35 } from "zod";
-var source_pin_missing_trace_warning = z35.object({
-  type: z35.literal("source_pin_missing_trace_warning"),
+import { z as z36 } from "zod";
+var source_pin_missing_trace_warning = z36.object({
+  type: z36.literal("source_pin_missing_trace_warning"),
   source_pin_missing_trace_warning_id: getZodPrefixedIdWithDefault(
     "source_pin_missing_trace_warning"
   ),
-  warning_type: z35.literal("source_pin_missing_trace_warning").default("source_pin_missing_trace_warning"),
-  message: z35.string(),
-  source_component_id: z35.string(),
-  source_port_id: z35.string(),
-  subcircuit_id: z35.string().optional()
+  warning_type: z36.literal("source_pin_missing_trace_warning").default("source_pin_missing_trace_warning"),
+  message: z36.string(),
+  source_component_id: z36.string(),
+  source_port_id: z36.string(),
+  subcircuit_id: z36.string().optional()
 }).describe(
   "Warning emitted when a source component pin is missing a trace connection"
 );
 expectTypesMatch(true);
 
 // src/source/source_simple_voltage_probe.ts
-import { z as z36 } from "zod";
+import { z as z37 } from "zod";
 var source_simple_voltage_probe = source_component_base.extend({
-  ftype: z36.literal("simple_voltage_probe")
+  ftype: z37.literal("simple_voltage_probe")
 });
 expectTypesMatch(
   true
 );
 
 // src/source/source_interconnect.ts
-import { z as z37 } from "zod";
+import { z as z38 } from "zod";
 var source_interconnect = source_component_base.extend({
-  ftype: z37.literal("interconnect")
+  ftype: z38.literal("interconnect")
 });
 expectTypesMatch(true);
 
 // src/source/any_source_component.ts
-var any_source_component = z38.union([
+var any_source_component = z39.union([
   source_simple_resistor,
   source_simple_capacitor,
   source_simple_diode,
@@ -683,106 +703,106 @@ var any_source_component = z38.union([
 expectTypesMatch(true);
 
 // src/source/source_port.ts
-import { z as z39 } from "zod";
-var source_port = z39.object({
-  type: z39.literal("source_port"),
-  pin_number: z39.number().optional(),
-  port_hints: z39.array(z39.string()).optional(),
-  name: z39.string(),
-  source_port_id: z39.string(),
-  source_component_id: z39.string().optional(),
-  source_group_id: z39.string().optional(),
-  subcircuit_id: z39.string().optional(),
-  subcircuit_connectivity_map_key: z39.string().optional(),
-  must_be_connected: z39.boolean().optional()
+import { z as z40 } from "zod";
+var source_port = z40.object({
+  type: z40.literal("source_port"),
+  pin_number: z40.number().optional(),
+  port_hints: z40.array(z40.string()).optional(),
+  name: z40.string(),
+  source_port_id: z40.string(),
+  source_component_id: z40.string().optional(),
+  source_group_id: z40.string().optional(),
+  subcircuit_id: z40.string().optional(),
+  subcircuit_connectivity_map_key: z40.string().optional(),
+  must_be_connected: z40.boolean().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_component_internal_connection.ts
-import { z as z40 } from "zod";
-var source_component_internal_connection = z40.object({
-  type: z40.literal("source_component_internal_connection"),
-  source_component_internal_connection_id: z40.string(),
-  source_component_id: z40.string(),
-  source_port_ids: z40.array(z40.string()),
-  subcircuit_id: z40.string().optional()
+import { z as z41 } from "zod";
+var source_component_internal_connection = z41.object({
+  type: z41.literal("source_component_internal_connection"),
+  source_component_internal_connection_id: z41.string(),
+  source_component_id: z41.string(),
+  source_port_ids: z41.array(z41.string()),
+  subcircuit_id: z41.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_trace.ts
-import { z as z41 } from "zod";
-var source_trace = z41.object({
-  type: z41.literal("source_trace"),
-  source_trace_id: z41.string(),
-  connected_source_port_ids: z41.array(z41.string()),
-  connected_source_net_ids: z41.array(z41.string()),
-  subcircuit_id: z41.string().optional(),
-  subcircuit_connectivity_map_key: z41.string().optional(),
-  max_length: z41.number().optional(),
-  min_trace_thickness: z41.number().optional(),
-  display_name: z41.string().optional()
+import { z as z42 } from "zod";
+var source_trace = z42.object({
+  type: z42.literal("source_trace"),
+  source_trace_id: z42.string(),
+  connected_source_port_ids: z42.array(z42.string()),
+  connected_source_net_ids: z42.array(z42.string()),
+  subcircuit_id: z42.string().optional(),
+  subcircuit_connectivity_map_key: z42.string().optional(),
+  max_length: z42.number().optional(),
+  min_trace_thickness: z42.number().optional(),
+  display_name: z42.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_group.ts
-import { z as z42 } from "zod";
-var source_group = z42.object({
-  type: z42.literal("source_group"),
-  source_group_id: z42.string(),
-  subcircuit_id: z42.string().optional(),
-  parent_subcircuit_id: z42.string().optional(),
-  parent_source_group_id: z42.string().optional(),
-  is_subcircuit: z42.boolean().optional(),
-  show_as_schematic_box: z42.boolean().optional(),
-  name: z42.string().optional(),
-  was_automatically_named: z42.boolean().optional()
+import { z as z43 } from "zod";
+var source_group = z43.object({
+  type: z43.literal("source_group"),
+  source_group_id: z43.string(),
+  subcircuit_id: z43.string().optional(),
+  parent_subcircuit_id: z43.string().optional(),
+  parent_source_group_id: z43.string().optional(),
+  is_subcircuit: z43.boolean().optional(),
+  show_as_schematic_box: z43.boolean().optional(),
+  name: z43.string().optional(),
+  was_automatically_named: z43.boolean().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_net.ts
-import { z as z43 } from "zod";
-var source_net = z43.object({
-  type: z43.literal("source_net"),
-  source_net_id: z43.string(),
-  name: z43.string(),
-  member_source_group_ids: z43.array(z43.string()),
-  is_power: z43.boolean().optional(),
-  is_ground: z43.boolean().optional(),
-  is_digital_signal: z43.boolean().optional(),
-  is_analog_signal: z43.boolean().optional(),
-  is_positive_voltage_source: z43.boolean().optional(),
-  trace_width: z43.number().optional(),
-  subcircuit_id: z43.string().optional(),
-  subcircuit_connectivity_map_key: z43.string().optional()
+import { z as z44 } from "zod";
+var source_net = z44.object({
+  type: z44.literal("source_net"),
+  source_net_id: z44.string(),
+  name: z44.string(),
+  member_source_group_ids: z44.array(z44.string()),
+  is_power: z44.boolean().optional(),
+  is_ground: z44.boolean().optional(),
+  is_digital_signal: z44.boolean().optional(),
+  is_analog_signal: z44.boolean().optional(),
+  is_positive_voltage_source: z44.boolean().optional(),
+  trace_width: z44.number().optional(),
+  subcircuit_id: z44.string().optional(),
+  subcircuit_connectivity_map_key: z44.string().optional()
 });
 expectTypesMatch(true);
 
 // src/source/source_board.ts
-import { z as z44 } from "zod";
-var source_board = z44.object({
-  type: z44.literal("source_board"),
-  source_board_id: z44.string(),
-  source_group_id: z44.string(),
-  title: z44.string().optional()
+import { z as z45 } from "zod";
+var source_board = z45.object({
+  type: z45.literal("source_board"),
+  source_board_id: z45.string(),
+  source_group_id: z45.string(),
+  title: z45.string().optional()
 }).describe("Defines a board in the source domain");
 expectTypesMatch(true);
 
 // src/source/source_pcb_ground_plane.ts
-import { z as z45 } from "zod";
-var source_pcb_ground_plane = z45.object({
-  type: z45.literal("source_pcb_ground_plane"),
-  source_pcb_ground_plane_id: z45.string(),
-  source_group_id: z45.string(),
-  source_net_id: z45.string(),
-  subcircuit_id: z45.string().optional()
+import { z as z46 } from "zod";
+var source_pcb_ground_plane = z46.object({
+  type: z46.literal("source_pcb_ground_plane"),
+  source_pcb_ground_plane_id: z46.string(),
+  source_group_id: z46.string(),
+  source_net_id: z46.string(),
+  subcircuit_id: z46.string().optional()
 }).describe("Defines a ground plane in the source domain");
 expectTypesMatch(true);
 
 // src/source/source_manually_placed_via.ts
-import { z as z47 } from "zod";
+import { z as z48 } from "zod";
 
 // src/pcb/properties/layer_ref.ts
-import { z as z46 } from "zod";
+import { z as z47 } from "zod";
 var all_layers = [
   "top",
   "bottom",
@@ -793,9 +813,9 @@ var all_layers = [
   "inner5",
   "inner6"
 ];
-var layer_string = z46.enum(all_layers);
+var layer_string = z47.enum(all_layers);
 var layer_ref = layer_string.or(
-  z46.object({
+  z47.object({
     name: layer_string
   })
 ).transform((layer) => {
@@ -805,253 +825,253 @@ var layer_ref = layer_string.or(
   return layer.name;
 });
 expectTypesMatch(true);
-var visible_layer = z46.enum(["top", "bottom"]);
+var visible_layer = z47.enum(["top", "bottom"]);
 
 // src/source/source_manually_placed_via.ts
-var source_manually_placed_via = z47.object({
-  type: z47.literal("source_manually_placed_via"),
-  source_manually_placed_via_id: z47.string(),
-  source_group_id: z47.string(),
-  source_net_id: z47.string(),
-  subcircuit_id: z47.string().optional(),
-  source_trace_id: z47.string().optional()
+var source_manually_placed_via = z48.object({
+  type: z48.literal("source_manually_placed_via"),
+  source_manually_placed_via_id: z48.string(),
+  source_group_id: z48.string(),
+  source_net_id: z48.string(),
+  subcircuit_id: z48.string().optional(),
+  source_trace_id: z48.string().optional()
 }).describe("Defines a via that is manually placed in the source domain");
 expectTypesMatch(true);
 
 // src/source/source_pin_must_be_connected_error.ts
-import { z as z48 } from "zod";
-var source_pin_must_be_connected_error = z48.object({
-  type: z48.literal("source_pin_must_be_connected_error"),
+import { z as z49 } from "zod";
+var source_pin_must_be_connected_error = z49.object({
+  type: z49.literal("source_pin_must_be_connected_error"),
   source_pin_must_be_connected_error_id: getZodPrefixedIdWithDefault(
     "source_pin_must_be_connected_error"
   ),
-  error_type: z48.literal("source_pin_must_be_connected_error").default("source_pin_must_be_connected_error"),
-  message: z48.string(),
-  source_component_id: z48.string(),
-  source_port_id: z48.string(),
-  subcircuit_id: z48.string().optional()
+  error_type: z49.literal("source_pin_must_be_connected_error").default("source_pin_must_be_connected_error"),
+  message: z49.string(),
+  source_component_id: z49.string(),
+  source_port_id: z49.string(),
+  subcircuit_id: z49.string().optional()
 }).describe(
   "Error emitted when a pin with mustBeConnected attribute is not connected to any trace"
 );
 expectTypesMatch(true);
 
 // src/source/unknown_error_finding_part.ts
-import { z as z49 } from "zod";
-var unknown_error_finding_part = z49.object({
-  type: z49.literal("unknown_error_finding_part"),
+import { z as z50 } from "zod";
+var unknown_error_finding_part = z50.object({
+  type: z50.literal("unknown_error_finding_part"),
   unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
     "unknown_error_finding_part"
   ),
-  error_type: z49.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
-  message: z49.string(),
-  source_component_id: z49.string().optional(),
-  subcircuit_id: z49.string().optional()
+  error_type: z50.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  message: z50.string(),
+  source_component_id: z50.string().optional(),
+  subcircuit_id: z50.string().optional()
 }).describe(
   "Error emitted when an unexpected error occurs while finding a part"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_box.ts
-import { z as z50 } from "zod";
-var schematic_box = z50.object({
-  type: z50.literal("schematic_box"),
-  schematic_component_id: z50.string().optional(),
+import { z as z51 } from "zod";
+var schematic_box = z51.object({
+  type: z51.literal("schematic_box"),
+  schematic_component_id: z51.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z50.boolean().default(false),
+  is_dashed: z51.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z50.string().optional()
+  subcircuit_id: z51.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_path.ts
-import { z as z51 } from "zod";
-var schematic_path = z51.object({
-  type: z51.literal("schematic_path"),
-  schematic_component_id: z51.string(),
-  fill_color: z51.enum(["red", "blue"]).optional(),
-  is_filled: z51.boolean().optional(),
-  points: z51.array(point),
-  subcircuit_id: z51.string().optional()
+import { z as z52 } from "zod";
+var schematic_path = z52.object({
+  type: z52.literal("schematic_path"),
+  schematic_component_id: z52.string(),
+  fill_color: z52.enum(["red", "blue"]).optional(),
+  is_filled: z52.boolean().optional(),
+  points: z52.array(point),
+  subcircuit_id: z52.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_component.ts
-import { z as z52 } from "zod";
-var schematic_pin_styles = z52.record(
-  z52.object({
+import { z as z53 } from "zod";
+var schematic_pin_styles = z53.record(
+  z53.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z52.object({
-  left_size: z52.number(),
-  right_size: z52.number(),
-  top_size: z52.number().optional(),
-  bottom_size: z52.number().optional()
+var schematic_component_port_arrangement_by_size = z53.object({
+  left_size: z53.number(),
+  right_size: z53.number(),
+  top_size: z53.number().optional(),
+  bottom_size: z53.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z52.object({
-  left_side: z52.object({
-    pins: z52.array(z52.number()),
+var schematic_component_port_arrangement_by_sides = z53.object({
+  left_side: z53.object({
+    pins: z53.array(z53.number()),
     // @ts-ignore
-    direction: z52.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z53.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z52.object({
-    pins: z52.array(z52.number()),
+  right_side: z53.object({
+    pins: z53.array(z53.number()),
     // @ts-ignore
-    direction: z52.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z53.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z52.object({
-    pins: z52.array(z52.number()),
+  top_side: z53.object({
+    pins: z53.array(z53.number()),
     // @ts-ignore
-    direction: z52.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z53.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z52.object({
-    pins: z52.array(z52.number()),
+  bottom_side: z53.object({
+    pins: z53.array(z53.number()),
     // @ts-ignore
-    direction: z52.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z53.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z52.union([
+var port_arrangement = z53.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z52.object({
-  type: z52.literal("schematic_component"),
+var schematic_component = z53.object({
+  type: z53.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z52.string().optional(),
-  schematic_component_id: z52.string(),
+  source_component_id: z53.string().optional(),
+  schematic_component_id: z53.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z52.string().optional(),
+  symbol_name: z53.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z52.record(z52.string()).optional(),
-  symbol_display_value: z52.string().optional(),
-  subcircuit_id: z52.string().optional(),
-  schematic_group_id: z52.string().optional(),
-  is_schematic_group: z52.boolean().optional(),
-  source_group_id: z52.string().optional(),
-  is_box_with_pins: z52.boolean().optional().default(true)
+  port_labels: z53.record(z53.string()).optional(),
+  symbol_display_value: z53.string().optional(),
+  subcircuit_id: z53.string().optional(),
+  schematic_group_id: z53.string().optional(),
+  is_schematic_group: z53.boolean().optional(),
+  source_group_id: z53.string().optional(),
+  is_box_with_pins: z53.boolean().optional().default(true)
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_line.ts
-import { z as z53 } from "zod";
-var schematic_line = z53.object({
-  type: z53.literal("schematic_line"),
+import { z as z54 } from "zod";
+var schematic_line = z54.object({
+  type: z54.literal("schematic_line"),
   schematic_line_id: getZodPrefixedIdWithDefault("schematic_line"),
-  schematic_component_id: z53.string(),
+  schematic_component_id: z54.string(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.nullable().optional(),
-  color: z53.string().default("#000000"),
-  is_dashed: z53.boolean().default(false),
-  subcircuit_id: z53.string().optional()
+  color: z54.string().default("#000000"),
+  is_dashed: z54.boolean().default(false),
+  subcircuit_id: z54.string().optional()
 }).describe("Draws a styled line on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_rect.ts
-import { z as z54 } from "zod";
-var schematic_rect = z54.object({
-  type: z54.literal("schematic_rect"),
+import { z as z55 } from "zod";
+var schematic_rect = z55.object({
+  type: z55.literal("schematic_rect"),
   schematic_rect_id: getZodPrefixedIdWithDefault("schematic_rect"),
-  schematic_component_id: z54.string(),
+  schematic_component_id: z55.string(),
   center: point,
   width: distance,
   height: distance,
   rotation: rotation.default(0),
   stroke_width: distance.nullable().optional(),
-  color: z54.string().default("#000000"),
-  is_filled: z54.boolean().default(false),
-  fill_color: z54.string().optional(),
-  is_dashed: z54.boolean().default(false),
-  subcircuit_id: z54.string().optional()
+  color: z55.string().default("#000000"),
+  is_filled: z55.boolean().default(false),
+  fill_color: z55.string().optional(),
+  is_dashed: z55.boolean().default(false),
+  subcircuit_id: z55.string().optional()
 }).describe("Draws a styled rectangle on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_circle.ts
-import { z as z55 } from "zod";
-var schematic_circle = z55.object({
-  type: z55.literal("schematic_circle"),
+import { z as z56 } from "zod";
+var schematic_circle = z56.object({
+  type: z56.literal("schematic_circle"),
   schematic_circle_id: getZodPrefixedIdWithDefault("schematic_circle"),
-  schematic_component_id: z55.string(),
+  schematic_component_id: z56.string(),
   center: point,
   radius: distance,
   stroke_width: distance.nullable().optional(),
-  color: z55.string().default("#000000"),
-  is_filled: z55.boolean().default(false),
-  fill_color: z55.string().optional(),
-  is_dashed: z55.boolean().default(false),
-  subcircuit_id: z55.string().optional()
+  color: z56.string().default("#000000"),
+  is_filled: z56.boolean().default(false),
+  fill_color: z56.string().optional(),
+  is_dashed: z56.boolean().default(false),
+  subcircuit_id: z56.string().optional()
 }).describe("Draws a styled circle on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_arc.ts
-import { z as z56 } from "zod";
-var schematic_arc = z56.object({
-  type: z56.literal("schematic_arc"),
+import { z as z57 } from "zod";
+var schematic_arc = z57.object({
+  type: z57.literal("schematic_arc"),
   schematic_arc_id: getZodPrefixedIdWithDefault("schematic_arc"),
-  schematic_component_id: z56.string(),
+  schematic_component_id: z57.string(),
   center: point,
   radius: distance,
   start_angle_degrees: rotation,
   end_angle_degrees: rotation,
-  direction: z56.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z57.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   stroke_width: distance.nullable().optional(),
-  color: z56.string().default("#000000"),
-  is_dashed: z56.boolean().default(false),
-  subcircuit_id: z56.string().optional()
+  color: z57.string().default("#000000"),
+  is_dashed: z57.boolean().default(false),
+  subcircuit_id: z57.string().optional()
 }).describe("Draws a styled arc on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_trace.ts
-import { z as z57 } from "zod";
-var schematic_trace = z57.object({
-  type: z57.literal("schematic_trace"),
-  schematic_trace_id: z57.string(),
-  source_trace_id: z57.string().optional(),
-  junctions: z57.array(
-    z57.object({
-      x: z57.number(),
-      y: z57.number()
+import { z as z58 } from "zod";
+var schematic_trace = z58.object({
+  type: z58.literal("schematic_trace"),
+  schematic_trace_id: z58.string(),
+  source_trace_id: z58.string().optional(),
+  junctions: z58.array(
+    z58.object({
+      x: z58.number(),
+      y: z58.number()
     })
   ),
-  edges: z57.array(
-    z57.object({
-      from: z57.object({
-        x: z57.number(),
-        y: z57.number()
+  edges: z58.array(
+    z58.object({
+      from: z58.object({
+        x: z58.number(),
+        y: z58.number()
       }),
-      to: z57.object({
-        x: z57.number(),
-        y: z57.number()
+      to: z58.object({
+        x: z58.number(),
+        y: z58.number()
       }),
-      is_crossing: z57.boolean().optional(),
-      from_schematic_port_id: z57.string().optional(),
-      to_schematic_port_id: z57.string().optional()
+      is_crossing: z58.boolean().optional(),
+      from_schematic_port_id: z58.string().optional(),
+      to_schematic_port_id: z58.string().optional()
     })
   ),
-  subcircuit_id: z57.string().optional(),
+  subcircuit_id: z58.string().optional(),
   // TODO: make required in a future release
-  subcircuit_connectivity_map_key: z57.string().optional()
+  subcircuit_connectivity_map_key: z58.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-import { z as z59 } from "zod";
+import { z as z60 } from "zod";
 
 // src/common/FivePointAnchor.ts
-import { z as z58 } from "zod";
-var fivePointAnchor = z58.enum([
+import { z as z59 } from "zod";
+var fivePointAnchor = z59.enum([
   "center",
   "left",
   "right",
@@ -1061,111 +1081,111 @@ var fivePointAnchor = z58.enum([
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-var schematic_text = z59.object({
-  type: z59.literal("schematic_text"),
-  schematic_component_id: z59.string().optional(),
-  schematic_text_id: z59.string(),
-  text: z59.string(),
-  font_size: z59.number().default(0.18),
-  position: z59.object({
+var schematic_text = z60.object({
+  type: z60.literal("schematic_text"),
+  schematic_component_id: z60.string().optional(),
+  schematic_text_id: z60.string(),
+  text: z60.string(),
+  font_size: z60.number().default(0.18),
+  position: z60.object({
     x: distance,
     y: distance
   }),
-  rotation: z59.number().default(0),
-  anchor: z59.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z59.string().default("#000000"),
-  subcircuit_id: z59.string().optional()
+  rotation: z60.number().default(0),
+  anchor: z60.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z60.string().default("#000000"),
+  subcircuit_id: z60.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_port.ts
-import { z as z60 } from "zod";
-var schematic_port = z60.object({
-  type: z60.literal("schematic_port"),
-  schematic_port_id: z60.string(),
-  source_port_id: z60.string(),
-  schematic_component_id: z60.string().optional(),
+import { z as z61 } from "zod";
+var schematic_port = z61.object({
+  type: z61.literal("schematic_port"),
+  schematic_port_id: z61.string(),
+  source_port_id: z61.string(),
+  schematic_component_id: z61.string().optional(),
   center: point,
-  facing_direction: z60.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z60.number().optional(),
-  side_of_component: z60.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z60.number().optional(),
-  pin_number: z60.number().optional(),
-  display_pin_label: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  is_connected: z60.boolean().optional(),
-  has_input_arrow: z60.boolean().optional(),
-  has_output_arrow: z60.boolean().optional()
+  facing_direction: z61.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z61.number().optional(),
+  side_of_component: z61.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z61.number().optional(),
+  pin_number: z61.number().optional(),
+  display_pin_label: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  is_connected: z61.boolean().optional(),
+  has_input_arrow: z61.boolean().optional(),
+  has_output_arrow: z61.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
 
 // src/schematic/schematic_net_label.ts
-import { z as z61 } from "zod";
-var schematic_net_label = z61.object({
-  type: z61.literal("schematic_net_label"),
+import { z as z62 } from "zod";
+var schematic_net_label = z62.object({
+  type: z62.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z61.string().optional(),
-  source_trace_id: z61.string().optional(),
-  source_net_id: z61.string(),
+  schematic_trace_id: z62.string().optional(),
+  source_trace_id: z62.string().optional(),
+  source_net_id: z62.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z61.enum(["top", "bottom", "left", "right"]),
-  text: z61.string(),
-  symbol_name: z61.string().optional(),
-  is_movable: z61.boolean().optional(),
-  subcircuit_id: z61.string().optional()
+  anchor_side: z62.enum(["top", "bottom", "left", "right"]),
+  text: z62.string(),
+  symbol_name: z62.string().optional(),
+  is_movable: z62.boolean().optional(),
+  subcircuit_id: z62.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_error.ts
-import { z as z62 } from "zod";
-var schematic_error = z62.object({
-  type: z62.literal("schematic_error"),
-  schematic_error_id: z62.string(),
+import { z as z63 } from "zod";
+var schematic_error = z63.object({
+  type: z63.literal("schematic_error"),
+  schematic_error_id: z63.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z62.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z62.string(),
-  subcircuit_id: z62.string().optional()
+  error_type: z63.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z63.string(),
+  subcircuit_id: z63.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_layout_error.ts
-import { z as z63 } from "zod";
-var schematic_layout_error = z63.object({
-  type: z63.literal("schematic_layout_error"),
+import { z as z64 } from "zod";
+var schematic_layout_error = z64.object({
+  type: z64.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z63.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z63.string(),
-  source_group_id: z63.string(),
-  schematic_group_id: z63.string(),
-  subcircuit_id: z63.string().optional()
+  error_type: z64.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z64.string(),
+  source_group_id: z64.string(),
+  schematic_group_id: z64.string(),
+  subcircuit_id: z64.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
 
 // src/schematic/schematic_debug_object.ts
-import { z as z64 } from "zod";
-var schematic_debug_object_base = z64.object({
-  type: z64.literal("schematic_debug_object"),
-  label: z64.string().optional(),
-  subcircuit_id: z64.string().optional()
+import { z as z65 } from "zod";
+var schematic_debug_object_base = z65.object({
+  type: z65.literal("schematic_debug_object"),
+  label: z65.string().optional(),
+  subcircuit_id: z65.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z64.literal("rect"),
+  shape: z65.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z64.literal("line"),
+  shape: z65.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z64.literal("point"),
+  shape: z65.literal("point"),
   center: point
 });
-var schematic_debug_object = z64.discriminatedUnion("shape", [
+var schematic_debug_object = z65.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
@@ -1173,282 +1193,282 @@ var schematic_debug_object = z64.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/schematic/schematic_voltage_probe.ts
-import { z as z65 } from "zod";
-var schematic_voltage_probe = z65.object({
-  type: z65.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z65.string(),
-  source_component_id: z65.string().optional(),
-  name: z65.string().optional(),
+import { z as z66 } from "zod";
+var schematic_voltage_probe = z66.object({
+  type: z66.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z66.string(),
+  source_component_id: z66.string().optional(),
+  name: z66.string().optional(),
   position: point,
-  schematic_trace_id: z65.string(),
+  schematic_trace_id: z66.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z65.string().optional(),
-  color: z65.string().optional(),
+  subcircuit_id: z66.string().optional(),
+  color: z66.string().optional(),
   label_alignment: ninePointAnchor.optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
 
 // src/schematic/schematic_manual_edit_conflict_warning.ts
-import { z as z66 } from "zod";
-var schematic_manual_edit_conflict_warning = z66.object({
-  type: z66.literal("schematic_manual_edit_conflict_warning"),
+import { z as z67 } from "zod";
+var schematic_manual_edit_conflict_warning = z67.object({
+  type: z67.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z66.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z66.string(),
-  schematic_component_id: z66.string(),
-  schematic_group_id: z66.string().optional(),
-  subcircuit_id: z66.string().optional(),
-  source_component_id: z66.string()
+  warning_type: z67.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z67.string(),
+  schematic_component_id: z67.string(),
+  schematic_group_id: z67.string().optional(),
+  subcircuit_id: z67.string().optional(),
+  source_component_id: z67.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_group.ts
-import { z as z67 } from "zod";
-var schematic_group = z67.object({
-  type: z67.literal("schematic_group"),
+import { z as z68 } from "zod";
+var schematic_group = z68.object({
+  type: z68.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z67.string(),
-  is_subcircuit: z67.boolean().optional(),
-  subcircuit_id: z67.string().optional(),
+  source_group_id: z68.string(),
+  is_subcircuit: z68.boolean().optional(),
+  subcircuit_id: z68.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z67.array(z67.string()),
-  show_as_schematic_box: z67.boolean().optional(),
-  name: z67.string().optional(),
-  description: z67.string().optional()
+  schematic_component_ids: z68.array(z68.string()),
+  show_as_schematic_box: z68.boolean().optional(),
+  name: z68.string().optional(),
+  description: z68.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table.ts
-import { z as z68 } from "zod";
-var schematic_table = z68.object({
-  type: z68.literal("schematic_table"),
+import { z as z69 } from "zod";
+var schematic_table = z69.object({
+  type: z69.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z68.array(distance),
-  row_heights: z68.array(distance),
+  column_widths: z69.array(distance),
+  row_heights: z69.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z68.string().optional(),
-  schematic_component_id: z68.string().optional(),
+  subcircuit_id: z69.string().optional(),
+  schematic_component_id: z69.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table_cell.ts
-import { z as z69 } from "zod";
-var schematic_table_cell = z69.object({
-  type: z69.literal("schematic_table_cell"),
+import { z as z70 } from "zod";
+var schematic_table_cell = z70.object({
+  type: z70.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z69.string(),
-  start_row_index: z69.number(),
-  end_row_index: z69.number(),
-  start_column_index: z69.number(),
-  end_column_index: z69.number(),
-  text: z69.string().optional(),
+  schematic_table_id: z70.string(),
+  start_row_index: z70.number(),
+  end_row_index: z70.number(),
+  start_column_index: z70.number(),
+  end_column_index: z70.number(),
+  text: z70.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z69.enum(["left", "center", "right"]).optional(),
-  vertical_align: z69.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z70.enum(["left", "center", "right"]).optional(),
+  vertical_align: z70.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z69.string().optional()
+  subcircuit_id: z70.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
 
 // src/schematic/schematic_sheet.ts
-import { z as z70 } from "zod";
-var schematic_sheet = z70.object({
-  type: z70.literal("schematic_sheet"),
+import { z as z71 } from "zod";
+var schematic_sheet = z71.object({
+  type: z71.literal("schematic_sheet"),
   schematic_sheet_id: getZodPrefixedIdWithDefault("schematic_sheet"),
-  name: z70.string().optional(),
-  subcircuit_id: z70.string().optional()
+  name: z71.string().optional(),
+  subcircuit_id: z71.string().optional()
 }).describe(
   "Defines a schematic sheet or page that components can be placed on"
 );
 expectTypesMatch(true);
 
 // src/pcb/properties/brep.ts
-import { z as z71 } from "zod";
-var point_with_bulge = z71.object({
+import { z as z72 } from "zod";
+var point_with_bulge = z72.object({
   x: distance,
   y: distance,
-  bulge: z71.number().optional()
+  bulge: z72.number().optional()
 });
 expectTypesMatch(true);
-var ring = z71.object({
-  vertices: z71.array(point_with_bulge)
+var ring = z72.object({
+  vertices: z72.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z71.object({
+var brep_shape = z72.object({
   outer_ring: ring,
-  inner_rings: z71.array(ring).default([])
+  inner_rings: z72.array(ring).default([])
 });
 expectTypesMatch(true);
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z72 } from "zod";
-var pcb_route_hint = z72.object({
+import { z as z73 } from "zod";
+var pcb_route_hint = z73.object({
   x: distance,
   y: distance,
-  via: z72.boolean().optional(),
+  via: z73.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z72.array(pcb_route_hint);
+var pcb_route_hints = z73.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z73 } from "zod";
-var route_hint_point = z73.object({
+import { z as z74 } from "zod";
+var route_hint_point = z74.object({
   x: distance,
   y: distance,
-  via: z73.boolean().optional(),
+  via: z74.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_component.ts
-import { z as z74 } from "zod";
-var pcb_component = z74.object({
-  type: z74.literal("pcb_component"),
+import { z as z75 } from "zod";
+var pcb_component = z75.object({
+  type: z75.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z74.string(),
+  source_component_id: z75.string(),
   center: point,
   layer: layer_ref,
   rotation,
-  display_offset_x: z74.string().optional().describe(
+  display_offset_x: z75.string().optional().describe(
     "How to display the x offset for this part, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z74.string().optional().describe(
+  display_offset_y: z75.string().optional().describe(
     "How to display the y offset for this part, usually corresponding with how the user specified it"
   ),
   width: length,
   height: length,
-  do_not_place: z74.boolean().optional(),
-  subcircuit_id: z74.string().optional(),
-  pcb_group_id: z74.string().optional(),
-  position_mode: z74.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z74.string().optional(),
-  positioned_relative_to_pcb_board_id: z74.string().optional(),
-  obstructs_within_bounds: z74.boolean().default(true).describe(
+  do_not_place: z75.boolean().optional(),
+  subcircuit_id: z75.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  position_mode: z75.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z75.string().optional(),
+  positioned_relative_to_pcb_board_id: z75.string().optional(),
+  obstructs_within_bounds: z75.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z75 } from "zod";
-var pcb_hole_circle = z75.object({
-  type: z75.literal("pcb_hole"),
+import { z as z76 } from "zod";
+var pcb_hole_circle = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.literal("circle"),
-  hole_diameter: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.literal("circle"),
+  hole_diameter: z76.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_circle_shape = pcb_hole_circle.describe(
   "Defines a circular hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rect = z75.object({
-  type: z75.literal("pcb_hole"),
+var pcb_hole_rect = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.literal("rect"),
-  hole_width: z75.number(),
-  hole_height: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.literal("rect"),
+  hole_width: z76.number(),
+  hole_height: z76.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_rect_shape = pcb_hole_rect.describe(
   "Defines a rectangular (square-capable) hole on the PCB. Use equal width/height for square."
 );
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z75.object({
-  type: z75.literal("pcb_hole"),
+var pcb_hole_circle_or_square = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.enum(["circle", "square"]),
-  hole_diameter: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.enum(["circle", "square"]),
+  hole_diameter: z76.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z75.object({
-  type: z75.literal("pcb_hole"),
+var pcb_hole_oval = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.literal("oval"),
-  hole_width: z75.number(),
-  hole_height: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.literal("oval"),
+  hole_width: z76.number(),
+  hole_height: z76.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z75.object({
-  type: z75.literal("pcb_hole"),
+var pcb_hole_pill = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.literal("pill"),
-  hole_width: z75.number(),
-  hole_height: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.literal("pill"),
+  hole_width: z76.number(),
+  hole_height: z76.number(),
   x: distance,
   y: distance,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z75.object({
-  type: z75.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z76.object({
+  type: z76.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  pcb_component_id: z75.string().optional(),
-  hole_shape: z75.literal("rotated_pill"),
-  hole_width: z75.number(),
-  hole_height: z75.number(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z76.string().optional(),
+  hole_shape: z76.literal("rotated_pill"),
+  hole_width: z76.number(),
+  hole_height: z76.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  is_covered_with_solder_mask: z75.boolean().optional(),
-  soldermask_margin: z75.number().optional()
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
 var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
   "Defines a rotated pill-shaped hole on the PCB"
@@ -1457,145 +1477,145 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill).or(pcb_hole_circle).or(pcb_hole_rect);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z76 } from "zod";
-var pcb_plated_hole_circle = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.literal("circle"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  outer_diameter: z76.number(),
-  hole_diameter: z76.number(),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+import { z as z77 } from "zod";
+var pcb_plated_hole_circle = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.literal("circle"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  outer_diameter: z77.number(),
+  hole_diameter: z77.number(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_plated_hole_oval = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.enum(["oval", "pill"]),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  outer_width: z76.number(),
-  outer_height: z76.number(),
-  hole_width: z76.number(),
-  hole_height: z76.number(),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+var pcb_plated_hole_oval = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.enum(["oval", "pill"]),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  outer_width: z77.number(),
+  outer_height: z77.number(),
+  hole_width: z77.number(),
+  hole_height: z77.number(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_circular_hole_with_rect_pad = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  hole_shape: z76.literal("circle"),
-  pad_shape: z76.literal("rect"),
-  hole_diameter: z76.number(),
-  rect_pad_width: z76.number(),
-  rect_pad_height: z76.number(),
-  rect_border_radius: z76.number().optional(),
+var pcb_circular_hole_with_rect_pad = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  hole_shape: z77.literal("circle"),
+  pad_shape: z77.literal("rect"),
+  hole_diameter: z77.number(),
+  rect_pad_width: z77.number(),
+  rect_pad_height: z77.number(),
+  rect_border_radius: z77.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_pill_hole_with_rect_pad = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  hole_shape: z76.literal("pill"),
-  pad_shape: z76.literal("rect"),
-  hole_width: z76.number(),
-  hole_height: z76.number(),
-  rect_pad_width: z76.number(),
-  rect_pad_height: z76.number(),
-  rect_border_radius: z76.number().optional(),
+var pcb_pill_hole_with_rect_pad = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  hole_shape: z77.literal("pill"),
+  pad_shape: z77.literal("rect"),
+  hole_width: z77.number(),
+  hole_height: z77.number(),
+  rect_pad_width: z77.number(),
+  rect_pad_height: z77.number(),
+  rect_border_radius: z77.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_rotated_pill_hole_with_rect_pad = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  hole_shape: z76.literal("rotated_pill"),
-  pad_shape: z76.literal("rect"),
-  hole_width: z76.number(),
-  hole_height: z76.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  hole_shape: z77.literal("rotated_pill"),
+  pad_shape: z77.literal("rect"),
+  hole_width: z77.number(),
+  hole_height: z77.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z76.number(),
-  rect_pad_height: z76.number(),
-  rect_border_radius: z76.number().optional(),
+  rect_pad_width: z77.number(),
+  rect_pad_height: z77.number(),
+  rect_border_radius: z77.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_hole_with_polygon_pad = z76.object({
-  type: z76.literal("pcb_plated_hole"),
-  shape: z76.literal("hole_with_polygon_pad"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  hole_shape: z76.enum(["circle", "oval", "pill", "rotated_pill"]),
-  hole_diameter: z76.number().optional(),
-  hole_width: z76.number().optional(),
-  hole_height: z76.number().optional(),
-  pad_outline: z76.array(
-    z76.object({
+var pcb_hole_with_polygon_pad = z77.object({
+  type: z77.literal("pcb_plated_hole"),
+  shape: z77.literal("hole_with_polygon_pad"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  hole_shape: z77.enum(["circle", "oval", "pill", "rotated_pill"]),
+  hole_diameter: z77.number().optional(),
+  hole_width: z77.number().optional(),
+  hole_height: z77.number().optional(),
+  pad_outline: z77.array(
+    z77.object({
       x: distance,
       y: distance
     })
   ).min(3),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
-  is_covered_with_solder_mask: z76.boolean().optional(),
+  is_covered_with_solder_mask: z77.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z76.array(layer_ref),
-  port_hints: z76.array(z76.string()).optional(),
-  pcb_component_id: z76.string().optional(),
-  pcb_port_id: z76.string().optional(),
+  layers: z77.array(layer_ref),
+  port_hints: z77.array(z77.string()).optional(),
+  pcb_component_id: z77.string().optional(),
+  pcb_port_id: z77.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
-  soldermask_margin: z76.number().optional()
+  soldermask_margin: z77.number().optional()
 });
-var pcb_plated_hole = z76.union([
+var pcb_plated_hole = z77.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -1613,130 +1633,130 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z77 } from "zod";
-var pcb_port = z77.object({
-  type: z77.literal("pcb_port"),
+import { z as z78 } from "zod";
+var pcb_port = z78.object({
+  type: z78.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z77.string().optional(),
-  subcircuit_id: z77.string().optional(),
-  source_port_id: z77.string(),
-  pcb_component_id: z77.string().optional(),
+  pcb_group_id: z78.string().optional(),
+  subcircuit_id: z78.string().optional(),
+  source_port_id: z78.string(),
+  pcb_component_id: z78.string().optional(),
   x: distance,
   y: distance,
-  layers: z77.array(layer_ref),
-  is_board_pinout: z77.boolean().optional()
+  layers: z78.array(layer_ref),
+  is_board_pinout: z78.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z78 } from "zod";
-var pcb_smtpad_circle = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("circle"),
+import { z as z79 } from "zod";
+var pcb_smtpad_circle = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   x: distance,
   y: distance,
-  radius: z78.number(),
+  radius: z79.number(),
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad_rect = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("rect"),
+var pcb_smtpad_rect = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   x: distance,
   y: distance,
-  width: z78.number(),
-  height: z78.number(),
-  rect_border_radius: z78.number().optional(),
-  corner_radius: z78.number().optional(),
+  width: z79.number(),
+  height: z79.number(),
+  rect_border_radius: z79.number().optional(),
+  corner_radius: z79.number().optional(),
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad_rotated_rect = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   x: distance,
   y: distance,
-  width: z78.number(),
-  height: z78.number(),
-  rect_border_radius: z78.number().optional(),
-  corner_radius: z78.number().optional(),
+  width: z79.number(),
+  height: z79.number(),
+  rect_border_radius: z79.number().optional(),
+  corner_radius: z79.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad_pill = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("pill"),
+var pcb_smtpad_pill = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   x: distance,
   y: distance,
-  width: z78.number(),
-  height: z78.number(),
-  radius: z78.number(),
+  width: z79.number(),
+  height: z79.number(),
+  radius: z79.number(),
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad_rotated_pill = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("rotated_pill"),
+var pcb_smtpad_rotated_pill = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   x: distance,
   y: distance,
-  width: z78.number(),
-  height: z78.number(),
-  radius: z78.number(),
+  width: z79.number(),
+  height: z79.number(),
+  radius: z79.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad_polygon = z78.object({
-  type: z78.literal("pcb_smtpad"),
-  shape: z78.literal("polygon"),
+var pcb_smtpad_polygon = z79.object({
+  type: z79.literal("pcb_smtpad"),
+  shape: z79.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
-  points: z78.array(point),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
+  points: z79.array(point),
   layer: layer_ref,
-  port_hints: z78.array(z78.string()).optional(),
-  pcb_component_id: z78.string().optional(),
-  pcb_port_id: z78.string().optional(),
-  is_covered_with_solder_mask: z78.boolean().optional(),
-  soldermask_margin: z78.number().optional()
+  port_hints: z79.array(z79.string()).optional(),
+  pcb_component_id: z79.string().optional(),
+  pcb_port_id: z79.string().optional(),
+  is_covered_with_solder_mask: z79.boolean().optional(),
+  soldermask_margin: z79.number().optional()
 });
-var pcb_smtpad = z78.discriminatedUnion("shape", [
+var pcb_smtpad = z79.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -1752,79 +1772,79 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z79 } from "zod";
-var pcb_solder_paste_circle = z79.object({
-  type: z79.literal("pcb_solder_paste"),
-  shape: z79.literal("circle"),
+import { z as z80 } from "zod";
+var pcb_solder_paste_circle = z80.object({
+  type: z80.literal("pcb_solder_paste"),
+  shape: z80.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   x: distance,
   y: distance,
-  radius: z79.number(),
+  radius: z80.number(),
   layer: layer_ref,
-  pcb_component_id: z79.string().optional(),
-  pcb_smtpad_id: z79.string().optional()
+  pcb_component_id: z80.string().optional(),
+  pcb_smtpad_id: z80.string().optional()
 });
-var pcb_solder_paste_rect = z79.object({
-  type: z79.literal("pcb_solder_paste"),
-  shape: z79.literal("rect"),
+var pcb_solder_paste_rect = z80.object({
+  type: z80.literal("pcb_solder_paste"),
+  shape: z80.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   x: distance,
   y: distance,
-  width: z79.number(),
-  height: z79.number(),
+  width: z80.number(),
+  height: z80.number(),
   layer: layer_ref,
-  pcb_component_id: z79.string().optional(),
-  pcb_smtpad_id: z79.string().optional()
+  pcb_component_id: z80.string().optional(),
+  pcb_smtpad_id: z80.string().optional()
 });
-var pcb_solder_paste_pill = z79.object({
-  type: z79.literal("pcb_solder_paste"),
-  shape: z79.literal("pill"),
+var pcb_solder_paste_pill = z80.object({
+  type: z80.literal("pcb_solder_paste"),
+  shape: z80.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   x: distance,
   y: distance,
-  width: z79.number(),
-  height: z79.number(),
-  radius: z79.number(),
+  width: z80.number(),
+  height: z80.number(),
+  radius: z80.number(),
   layer: layer_ref,
-  pcb_component_id: z79.string().optional(),
-  pcb_smtpad_id: z79.string().optional()
+  pcb_component_id: z80.string().optional(),
+  pcb_smtpad_id: z80.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z79.object({
-  type: z79.literal("pcb_solder_paste"),
-  shape: z79.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z80.object({
+  type: z80.literal("pcb_solder_paste"),
+  shape: z80.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   x: distance,
   y: distance,
-  width: z79.number(),
-  height: z79.number(),
+  width: z80.number(),
+  height: z80.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z79.string().optional(),
-  pcb_smtpad_id: z79.string().optional()
+  pcb_component_id: z80.string().optional(),
+  pcb_smtpad_id: z80.string().optional()
 });
-var pcb_solder_paste_oval = z79.object({
-  type: z79.literal("pcb_solder_paste"),
-  shape: z79.literal("oval"),
+var pcb_solder_paste_oval = z80.object({
+  type: z80.literal("pcb_solder_paste"),
+  shape: z80.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   x: distance,
   y: distance,
-  width: z79.number(),
-  height: z79.number(),
+  width: z80.number(),
+  height: z80.number(),
   layer: layer_ref,
-  pcb_component_id: z79.string().optional(),
-  pcb_smtpad_id: z79.string().optional()
+  pcb_component_id: z80.string().optional(),
+  pcb_smtpad_id: z80.string().optional()
 });
-var pcb_solder_paste = z79.union([
+var pcb_solder_paste = z80.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -1840,146 +1860,146 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z80 } from "zod";
-var pcb_text = z80.object({
-  type: z80.literal("pcb_text"),
+import { z as z81 } from "zod";
+var pcb_text = z81.object({
+  type: z81.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z80.string().optional(),
-  subcircuit_id: z80.string().optional(),
-  text: z80.string(),
+  pcb_group_id: z81.string().optional(),
+  subcircuit_id: z81.string().optional(),
+  text: z81.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z80.number(),
+  lines: z81.number(),
   // @ts-ignore
-  align: z80.enum(["bottom-left"])
+  align: z81.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z81 } from "zod";
-var pcb_trace_route_point_wire = z81.object({
-  route_type: z81.literal("wire"),
+import { z as z82 } from "zod";
+var pcb_trace_route_point_wire = z82.object({
+  route_type: z82.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z81.string().optional(),
-  end_pcb_port_id: z81.string().optional(),
+  start_pcb_port_id: z82.string().optional(),
+  end_pcb_port_id: z82.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z81.object({
-  route_type: z81.literal("via"),
+var pcb_trace_route_point_via = z82.object({
+  route_type: z82.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z81.string(),
-  to_layer: z81.string()
+  from_layer: z82.string(),
+  to_layer: z82.string()
 });
-var pcb_trace_route_point = z81.union([
+var pcb_trace_route_point = z82.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z81.object({
-  type: z81.literal("pcb_trace"),
-  source_trace_id: z81.string().optional(),
-  pcb_component_id: z81.string().optional(),
+var pcb_trace = z82.object({
+  type: z82.literal("pcb_trace"),
+  source_trace_id: z82.string().optional(),
+  pcb_component_id: z82.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z81.string().optional(),
-  subcircuit_id: z81.string().optional(),
-  route_thickness_mode: z81.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z81.number().optional(),
-  should_round_corners: z81.boolean().optional(),
-  trace_length: z81.number().optional(),
-  highlight_color: z81.string().optional(),
-  route: z81.array(pcb_trace_route_point)
+  pcb_group_id: z82.string().optional(),
+  subcircuit_id: z82.string().optional(),
+  route_thickness_mode: z82.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z82.number().optional(),
+  should_round_corners: z82.boolean().optional(),
+  trace_length: z82.number().optional(),
+  highlight_color: z82.string().optional(),
+  route: z82.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z82 } from "zod";
-var pcb_trace_error = z82.object({
-  type: z82.literal("pcb_trace_error"),
+import { z as z83 } from "zod";
+var pcb_trace_error = z83.object({
+  type: z83.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z82.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z82.string(),
+  error_type: z83.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z83.string(),
   center: point.optional(),
-  pcb_trace_id: z82.string(),
-  source_trace_id: z82.string(),
-  pcb_component_ids: z82.array(z82.string()),
-  pcb_port_ids: z82.array(z82.string()),
-  subcircuit_id: z82.string().optional()
+  pcb_trace_id: z83.string(),
+  source_trace_id: z83.string(),
+  pcb_component_ids: z83.array(z83.string()),
+  pcb_port_ids: z83.array(z83.string()),
+  subcircuit_id: z83.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z83 } from "zod";
-var pcb_trace_missing_error = z83.object({
-  type: z83.literal("pcb_trace_missing_error"),
+import { z as z84 } from "zod";
+var pcb_trace_missing_error = z84.object({
+  type: z84.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z83.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z83.string(),
+  error_type: z84.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z84.string(),
   center: point.optional(),
-  source_trace_id: z83.string(),
-  pcb_component_ids: z83.array(z83.string()),
-  pcb_port_ids: z83.array(z83.string()),
-  subcircuit_id: z83.string().optional()
+  source_trace_id: z84.string(),
+  pcb_component_ids: z84.array(z84.string()),
+  pcb_port_ids: z84.array(z84.string()),
+  subcircuit_id: z84.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z84 } from "zod";
-var pcb_port_not_matched_error = z84.object({
-  type: z84.literal("pcb_port_not_matched_error"),
+import { z as z85 } from "zod";
+var pcb_port_not_matched_error = z85.object({
+  type: z85.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z84.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z84.string(),
-  pcb_component_ids: z84.array(z84.string()),
-  subcircuit_id: z84.string().optional()
+  error_type: z85.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z85.string(),
+  pcb_component_ids: z85.array(z85.string()),
+  subcircuit_id: z85.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z85 } from "zod";
-var pcb_port_not_connected_error = z85.object({
-  type: z85.literal("pcb_port_not_connected_error"),
+import { z as z86 } from "zod";
+var pcb_port_not_connected_error = z86.object({
+  type: z86.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z85.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z85.string(),
-  pcb_port_ids: z85.array(z85.string()),
-  pcb_component_ids: z85.array(z85.string()),
-  subcircuit_id: z85.string().optional()
+  error_type: z86.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z86.string(),
+  pcb_port_ids: z86.array(z86.string()),
+  pcb_component_ids: z86.array(z86.string()),
+  subcircuit_id: z86.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_net.ts
-import { z as z86 } from "zod";
-var pcb_net = z86.object({
-  type: z86.literal("pcb_net"),
+import { z as z87 } from "zod";
+var pcb_net = z87.object({
+  type: z87.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z86.string().optional(),
-  highlight_color: z86.string().optional()
+  source_net_id: z87.string().optional(),
+  highlight_color: z87.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z87 } from "zod";
-var pcb_via = z87.object({
-  type: z87.literal("pcb_via"),
+import { z as z88 } from "zod";
+var pcb_via = z88.object({
+  type: z88.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z87.string().optional(),
-  subcircuit_id: z87.string().optional(),
-  subcircuit_connectivity_map_key: z87.string().optional(),
+  pcb_group_id: z88.string().optional(),
+  subcircuit_id: z88.string().optional(),
+  subcircuit_connectivity_map_key: z88.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -1988,85 +2008,85 @@ var pcb_via = z87.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z87.array(layer_ref),
-  pcb_trace_id: z87.string().optional(),
-  net_is_assignable: z87.boolean().optional(),
-  net_assigned: z87.boolean().optional(),
-  is_tented: z87.boolean().optional()
+  layers: z88.array(layer_ref),
+  pcb_trace_id: z88.string().optional(),
+  net_is_assignable: z88.boolean().optional(),
+  net_assigned: z88.boolean().optional(),
+  is_tented: z88.boolean().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z88 } from "zod";
-var pcb_board = z88.object({
-  type: z88.literal("pcb_board"),
+import { z as z89 } from "zod";
+var pcb_board = z89.object({
+  type: z89.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z88.string().optional(),
-  is_subcircuit: z88.boolean().optional(),
-  subcircuit_id: z88.string().optional(),
+  pcb_panel_id: z89.string().optional(),
+  is_subcircuit: z89.boolean().optional(),
+  subcircuit_id: z89.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z88.string().optional().describe(
+  display_offset_x: z89.string().optional().describe(
     "How to display the x offset for this board, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z88.string().optional().describe(
+  display_offset_y: z89.string().optional().describe(
     "How to display the y offset for this board, usually corresponding with how the user specified it"
   ),
   thickness: length.optional().default(1.4),
-  num_layers: z88.number().optional().default(4),
-  outline: z88.array(point).optional(),
-  shape: z88.enum(["rect", "polygon"]).optional(),
-  material: z88.enum(["fr4", "fr1"]).default("fr4"),
+  num_layers: z89.number().optional().default(4),
+  outline: z89.array(point).optional(),
+  shape: z89.enum(["rect", "polygon"]).optional(),
+  material: z89.enum(["fr4", "fr1"]).default("fr4"),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.optional(),
-  position_mode: z88.enum(["relative_to_panel_anchor", "none"]).optional()
+  position_mode: z89.enum(["relative_to_panel_anchor", "none"]).optional()
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z89 } from "zod";
-var pcb_panel = z89.object({
-  type: z89.literal("pcb_panel"),
+import { z as z90 } from "zod";
+var pcb_panel = z90.object({
+  type: z90.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
   center: point,
-  covered_with_solder_mask: z89.boolean().optional().default(true)
+  covered_with_solder_mask: z90.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z90 } from "zod";
-var pcb_placement_error = z90.object({
-  type: z90.literal("pcb_placement_error"),
+import { z as z91 } from "zod";
+var pcb_placement_error = z91.object({
+  type: z91.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z90.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z90.string(),
-  subcircuit_id: z90.string().optional()
+  error_type: z91.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z91.string(),
+  subcircuit_id: z91.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z91 } from "zod";
-var pcb_trace_hint = z91.object({
-  type: z91.literal("pcb_trace_hint"),
+import { z as z92 } from "zod";
+var pcb_trace_hint = z92.object({
+  type: z92.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z91.string(),
-  pcb_component_id: z91.string(),
-  route: z91.array(route_hint_point),
-  subcircuit_id: z91.string().optional()
+  pcb_port_id: z92.string(),
+  pcb_component_id: z92.string(),
+  route: z92.array(route_hint_point),
+  subcircuit_id: z92.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z92 } from "zod";
-var pcb_silkscreen_line = z92.object({
-  type: z92.literal("pcb_silkscreen_line"),
+import { z as z93 } from "zod";
+var pcb_silkscreen_line = z93.object({
+  type: z93.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z92.string(),
-  pcb_group_id: z92.string().optional(),
-  subcircuit_id: z92.string().optional(),
+  pcb_component_id: z93.string(),
+  pcb_group_id: z93.string().optional(),
+  subcircuit_id: z93.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -2077,32 +2097,32 @@ var pcb_silkscreen_line = z92.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z93 } from "zod";
-var pcb_silkscreen_path = z93.object({
-  type: z93.literal("pcb_silkscreen_path"),
+import { z as z94 } from "zod";
+var pcb_silkscreen_path = z94.object({
+  type: z94.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z93.string(),
-  pcb_group_id: z93.string().optional(),
-  subcircuit_id: z93.string().optional(),
+  pcb_component_id: z94.string(),
+  pcb_group_id: z94.string().optional(),
+  subcircuit_id: z94.string().optional(),
   layer: visible_layer,
-  route: z93.array(point),
+  route: z94.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z94 } from "zod";
-var pcb_silkscreen_text = z94.object({
-  type: z94.literal("pcb_silkscreen_text"),
+import { z as z95 } from "zod";
+var pcb_silkscreen_text = z95.object({
+  type: z95.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z94.string().optional(),
-  subcircuit_id: z94.string().optional(),
-  font: z94.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z95.string().optional(),
+  subcircuit_id: z95.string().optional(),
+  font: z95.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z94.string(),
-  text: z94.string(),
-  is_knockout: z94.boolean().default(false).optional(),
-  knockout_padding: z94.object({
+  pcb_component_id: z95.string(),
+  text: z95.string(),
+  is_knockout: z95.boolean().default(false).optional(),
+  knockout_padding: z95.object({
     left: length,
     top: length,
     bottom: length,
@@ -2113,27 +2133,27 @@ var pcb_silkscreen_text = z94.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z94.number().optional(),
+  ccw_rotation: z95.number().optional(),
   layer: layer_ref,
-  is_mirrored: z94.boolean().default(false).optional(),
+  is_mirrored: z95.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_text.ts
-import { z as z95 } from "zod";
-var pcb_copper_text = z95.object({
-  type: z95.literal("pcb_copper_text"),
+import { z as z96 } from "zod";
+var pcb_copper_text = z96.object({
+  type: z96.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z95.string().optional(),
-  subcircuit_id: z95.string().optional(),
-  font: z95.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z96.string().optional(),
+  subcircuit_id: z96.string().optional(),
+  font: z96.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z95.string(),
-  text: z95.string(),
-  is_knockout: z95.boolean().default(false).optional(),
-  knockout_padding: z95.object({
+  pcb_component_id: z96.string(),
+  text: z96.string(),
+  is_knockout: z96.boolean().default(false).optional(),
+  knockout_padding: z96.object({
     left: length,
     top: length,
     bottom: length,
@@ -2144,44 +2164,44 @@ var pcb_copper_text = z95.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z95.number().optional(),
+  ccw_rotation: z96.number().optional(),
   layer: layer_ref,
-  is_mirrored: z95.boolean().default(false).optional(),
+  is_mirrored: z96.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z96 } from "zod";
-var pcb_silkscreen_rect = z96.object({
-  type: z96.literal("pcb_silkscreen_rect"),
+import { z as z97 } from "zod";
+var pcb_silkscreen_rect = z97.object({
+  type: z97.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z96.string(),
-  pcb_group_id: z96.string().optional(),
-  subcircuit_id: z96.string().optional(),
+  pcb_component_id: z97.string(),
+  pcb_group_id: z97.string().optional(),
+  subcircuit_id: z97.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z96.boolean().default(true).optional(),
-  has_stroke: z96.boolean().optional(),
-  is_stroke_dashed: z96.boolean().optional()
+  is_filled: z97.boolean().default(true).optional(),
+  has_stroke: z97.boolean().optional(),
+  is_stroke_dashed: z97.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z97 } from "zod";
-var pcb_silkscreen_circle = z97.object({
-  type: z97.literal("pcb_silkscreen_circle"),
+import { z as z98 } from "zod";
+var pcb_silkscreen_circle = z98.object({
+  type: z98.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z97.string(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
+  pcb_component_id: z98.string(),
+  pcb_group_id: z98.string().optional(),
+  subcircuit_id: z98.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
@@ -2190,13 +2210,13 @@ var pcb_silkscreen_circle = z97.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z98 } from "zod";
-var pcb_silkscreen_oval = z98.object({
-  type: z98.literal("pcb_silkscreen_oval"),
+import { z as z99 } from "zod";
+var pcb_silkscreen_oval = z99.object({
+  type: z99.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z98.string(),
-  pcb_group_id: z98.string().optional(),
-  subcircuit_id: z98.string().optional(),
+  pcb_component_id: z99.string(),
+  pcb_group_id: z99.string().optional(),
+  subcircuit_id: z99.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -2205,13 +2225,13 @@ var pcb_silkscreen_oval = z98.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_pill.ts
-import { z as z99 } from "zod";
-var pcb_silkscreen_pill = z99.object({
-  type: z99.literal("pcb_silkscreen_pill"),
+import { z as z100 } from "zod";
+var pcb_silkscreen_pill = z100.object({
+  type: z100.literal("pcb_silkscreen_pill"),
   pcb_silkscreen_pill_id: getZodPrefixedIdWithDefault("pcb_silkscreen_pill"),
-  pcb_component_id: z99.string(),
-  pcb_group_id: z99.string().optional(),
-  subcircuit_id: z99.string().optional(),
+  pcb_component_id: z100.string(),
+  pcb_group_id: z100.string().optional(),
+  subcircuit_id: z100.string().optional(),
   center: point,
   width: length,
   height: length,
@@ -2220,257 +2240,257 @@ var pcb_silkscreen_pill = z99.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z100 } from "zod";
-var pcb_fabrication_note_text = z100.object({
-  type: z100.literal("pcb_fabrication_note_text"),
+import { z as z101 } from "zod";
+var pcb_fabrication_note_text = z101.object({
+  type: z101.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z100.string().optional(),
-  pcb_group_id: z100.string().optional(),
-  font: z100.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z101.string().optional(),
+  pcb_group_id: z101.string().optional(),
+  font: z101.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z100.string(),
-  text: z100.string(),
+  pcb_component_id: z101.string(),
+  text: z101.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z100.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z100.string().optional()
+  anchor_alignment: z101.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z101.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z101 } from "zod";
-var pcb_fabrication_note_path = z101.object({
-  type: z101.literal("pcb_fabrication_note_path"),
+import { z as z102 } from "zod";
+var pcb_fabrication_note_path = z102.object({
+  type: z102.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z101.string(),
-  subcircuit_id: z101.string().optional(),
+  pcb_component_id: z102.string(),
+  subcircuit_id: z102.string().optional(),
   layer: layer_ref,
-  route: z101.array(point),
+  route: z102.array(point),
   stroke_width: length,
-  color: z101.string().optional()
+  color: z102.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z102 } from "zod";
-var pcb_fabrication_note_rect = z102.object({
-  type: z102.literal("pcb_fabrication_note_rect"),
+import { z as z103 } from "zod";
+var pcb_fabrication_note_rect = z103.object({
+  type: z103.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z102.string(),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
+  pcb_component_id: z103.string(),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z102.boolean().optional(),
-  has_stroke: z102.boolean().optional(),
-  is_stroke_dashed: z102.boolean().optional(),
-  color: z102.string().optional()
+  is_filled: z103.boolean().optional(),
+  has_stroke: z103.boolean().optional(),
+  is_stroke_dashed: z103.boolean().optional(),
+  color: z103.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z103 } from "zod";
-var pcb_fabrication_note_dimension = z103.object({
-  type: z103.literal("pcb_fabrication_note_dimension"),
+import { z as z104 } from "zod";
+var pcb_fabrication_note_dimension = z104.object({
+  type: z104.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z103.string(),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
+  pcb_component_id: z104.string(),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z103.string().optional(),
-  text_ccw_rotation: z103.number().optional(),
+  text: z104.string().optional(),
+  text_ccw_rotation: z104.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z103.object({
-    x: z103.number(),
-    y: z103.number()
+  offset_direction: z104.object({
+    x: z104.number(),
+    y: z104.number()
   }).optional(),
-  font: z103.literal("tscircuit2024").default("tscircuit2024"),
+  font: z104.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z103.string().optional(),
+  color: z104.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z104 } from "zod";
-var pcb_note_text = z104.object({
-  type: z104.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z104.string().optional(),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
-  name: z104.string().optional(),
-  font: z104.literal("tscircuit2024").default("tscircuit2024"),
-  font_size: distance.default("1mm"),
-  text: z104.string().optional(),
-  anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z104.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z104.string().optional()
-}).describe("Defines a documentation note in text on the PCB");
-expectTypesMatch(true);
-
-// src/pcb/pcb_note_rect.ts
 import { z as z105 } from "zod";
-var pcb_note_rect = z105.object({
-  type: z105.literal("pcb_note_rect"),
-  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
+var pcb_note_text = z105.object({
+  type: z105.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
   pcb_component_id: z105.string().optional(),
   pcb_group_id: z105.string().optional(),
   subcircuit_id: z105.string().optional(),
   name: z105.string().optional(),
+  font: z105.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: distance.default("1mm"),
   text: z105.string().optional(),
-  center: point,
-  width: length,
-  height: length,
-  stroke_width: length.default("0.1mm"),
-  corner_radius: length.optional(),
-  is_filled: z105.boolean().optional(),
-  has_stroke: z105.boolean().optional(),
-  is_stroke_dashed: z105.boolean().optional(),
+  anchor_position: point.default({ x: 0, y: 0 }),
+  anchor_alignment: z105.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
   color: z105.string().optional()
-}).describe("Defines a rectangular documentation note on the PCB");
+}).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_path.ts
+// src/pcb/pcb_note_rect.ts
 import { z as z106 } from "zod";
-var pcb_note_path = z106.object({
-  type: z106.literal("pcb_note_path"),
-  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
+var pcb_note_rect = z106.object({
+  type: z106.literal("pcb_note_rect"),
+  pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
   pcb_component_id: z106.string().optional(),
   pcb_group_id: z106.string().optional(),
   subcircuit_id: z106.string().optional(),
   name: z106.string().optional(),
   text: z106.string().optional(),
-  route: z106.array(point),
+  center: point,
+  width: length,
+  height: length,
   stroke_width: length.default("0.1mm"),
+  corner_radius: length.optional(),
+  is_filled: z106.boolean().optional(),
+  has_stroke: z106.boolean().optional(),
+  is_stroke_dashed: z106.boolean().optional(),
   color: z106.string().optional()
-}).describe("Defines a polyline documentation note on the PCB");
+}).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_line.ts
+// src/pcb/pcb_note_path.ts
 import { z as z107 } from "zod";
-var pcb_note_line = z107.object({
-  type: z107.literal("pcb_note_line"),
-  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+var pcb_note_path = z107.object({
+  type: z107.literal("pcb_note_path"),
+  pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
   pcb_component_id: z107.string().optional(),
   pcb_group_id: z107.string().optional(),
   subcircuit_id: z107.string().optional(),
   name: z107.string().optional(),
   text: z107.string().optional(),
+  route: z107.array(point),
+  stroke_width: length.default("0.1mm"),
+  color: z107.string().optional()
+}).describe("Defines a polyline documentation note on the PCB");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_line.ts
+import { z as z108 } from "zod";
+var pcb_note_line = z108.object({
+  type: z108.literal("pcb_note_line"),
+  pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
+  pcb_component_id: z108.string().optional(),
+  pcb_group_id: z108.string().optional(),
+  subcircuit_id: z108.string().optional(),
+  name: z108.string().optional(),
+  text: z108.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z107.string().optional(),
-  is_dashed: z107.boolean().optional()
+  color: z108.string().optional(),
+  is_dashed: z108.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z108 } from "zod";
-var pcb_note_dimension = z108.object({
-  type: z108.literal("pcb_note_dimension"),
+import { z as z109 } from "zod";
+var pcb_note_dimension = z109.object({
+  type: z109.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z108.string().optional(),
-  pcb_group_id: z108.string().optional(),
-  subcircuit_id: z108.string().optional(),
-  name: z108.string().optional(),
+  pcb_component_id: z109.string().optional(),
+  pcb_group_id: z109.string().optional(),
+  subcircuit_id: z109.string().optional(),
+  name: z109.string().optional(),
   from: point,
   to: point,
-  text: z108.string().optional(),
-  text_ccw_rotation: z108.number().optional(),
+  text: z109.string().optional(),
+  text_ccw_rotation: z109.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z108.object({
-    x: z108.number(),
-    y: z108.number()
+  offset_direction: z109.object({
+    x: z109.number(),
+    y: z109.number()
   }).optional(),
-  font: z108.literal("tscircuit2024").default("tscircuit2024"),
+  font: z109.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z108.string().optional(),
+  color: z109.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z109 } from "zod";
-var pcb_footprint_overlap_error = z109.object({
-  type: z109.literal("pcb_footprint_overlap_error"),
+import { z as z110 } from "zod";
+var pcb_footprint_overlap_error = z110.object({
+  type: z110.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z109.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z109.string(),
-  pcb_smtpad_ids: z109.array(z109.string()).optional(),
-  pcb_plated_hole_ids: z109.array(z109.string()).optional(),
-  pcb_hole_ids: z109.array(z109.string()).optional(),
-  pcb_keepout_ids: z109.array(z109.string()).optional()
+  error_type: z110.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z110.string(),
+  pcb_smtpad_ids: z110.array(z110.string()).optional(),
+  pcb_plated_hole_ids: z110.array(z110.string()).optional(),
+  pcb_hole_ids: z110.array(z110.string()).optional(),
+  pcb_keepout_ids: z110.array(z110.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z110 } from "zod";
-var pcb_keepout = z110.object({
-  type: z110.literal("pcb_keepout"),
-  shape: z110.literal("rect"),
-  pcb_group_id: z110.string().optional(),
-  subcircuit_id: z110.string().optional(),
+import { z as z111 } from "zod";
+var pcb_keepout = z111.object({
+  type: z111.literal("pcb_keepout"),
+  shape: z111.literal("rect"),
+  pcb_group_id: z111.string().optional(),
+  subcircuit_id: z111.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z110.string(),
-  layers: z110.array(z110.string()),
+  pcb_keepout_id: z111.string(),
+  layers: z111.array(z111.string()),
   // Specify layers where the keepout applies
-  description: z110.string().optional()
+  description: z111.string().optional()
   // Optional description of the keepout
 }).or(
-  z110.object({
-    type: z110.literal("pcb_keepout"),
-    shape: z110.literal("circle"),
-    pcb_group_id: z110.string().optional(),
-    subcircuit_id: z110.string().optional(),
+  z111.object({
+    type: z111.literal("pcb_keepout"),
+    shape: z111.literal("circle"),
+    pcb_group_id: z111.string().optional(),
+    subcircuit_id: z111.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z110.string(),
-    layers: z110.array(z110.string()),
+    pcb_keepout_id: z111.string(),
+    layers: z111.array(z111.string()),
     // Specify layers where the keepout applies
-    description: z110.string().optional()
+    description: z111.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z111 } from "zod";
-var pcb_cutout_base = z111.object({
-  type: z111.literal("pcb_cutout"),
+import { z as z112 } from "zod";
+var pcb_cutout_base = z112.object({
+  type: z112.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z111.string().optional(),
-  subcircuit_id: z111.string().optional(),
-  pcb_board_id: z111.string().optional(),
-  pcb_panel_id: z111.string().optional()
+  pcb_group_id: z112.string().optional(),
+  subcircuit_id: z112.string().optional(),
+  pcb_board_id: z112.string().optional(),
+  pcb_panel_id: z112.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z111.literal("rect"),
+  shape: z112.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2479,26 +2499,26 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z111.literal("circle"),
+  shape: z112.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z111.literal("polygon"),
-  points: z111.array(point)
+  shape: z112.literal("polygon"),
+  points: z112.array(point)
 });
 expectTypesMatch(true);
 var pcb_cutout_path = pcb_cutout_base.extend({
-  shape: z111.literal("path"),
-  route: z111.array(point),
+  shape: z112.literal("path"),
+  route: z112.array(point),
   slot_width: length,
   slot_length: length.optional(),
   space_between_slots: length.optional(),
   slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z111.discriminatedUnion("shape", [
+var pcb_cutout = z112.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon,
@@ -2507,130 +2527,130 @@ var pcb_cutout = z111.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z112 } from "zod";
-var pcb_missing_footprint_error = z112.object({
-  type: z112.literal("pcb_missing_footprint_error"),
+import { z as z113 } from "zod";
+var pcb_missing_footprint_error = z113.object({
+  type: z113.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z112.string().optional(),
-  subcircuit_id: z112.string().optional(),
-  error_type: z112.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z112.string(),
-  message: z112.string()
+  pcb_group_id: z113.string().optional(),
+  subcircuit_id: z113.string().optional(),
+  error_type: z113.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z113.string(),
+  message: z113.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z113 } from "zod";
-var external_footprint_load_error = z113.object({
-  type: z113.literal("external_footprint_load_error"),
+import { z as z114 } from "zod";
+var external_footprint_load_error = z114.object({
+  type: z114.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z113.string(),
-  source_component_id: z113.string(),
-  pcb_group_id: z113.string().optional(),
-  subcircuit_id: z113.string().optional(),
-  footprinter_string: z113.string().optional(),
-  error_type: z113.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z113.string()
+  pcb_component_id: z114.string(),
+  source_component_id: z114.string(),
+  pcb_group_id: z114.string().optional(),
+  subcircuit_id: z114.string().optional(),
+  footprinter_string: z114.string().optional(),
+  error_type: z114.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z114.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z114 } from "zod";
-var circuit_json_footprint_load_error = z114.object({
-  type: z114.literal("circuit_json_footprint_load_error"),
+import { z as z115 } from "zod";
+var circuit_json_footprint_load_error = z115.object({
+  type: z115.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z114.string(),
-  source_component_id: z114.string(),
-  pcb_group_id: z114.string().optional(),
-  subcircuit_id: z114.string().optional(),
-  error_type: z114.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z114.string(),
-  circuit_json: z114.array(z114.any()).optional()
+  pcb_component_id: z115.string(),
+  source_component_id: z115.string(),
+  pcb_group_id: z115.string().optional(),
+  subcircuit_id: z115.string().optional(),
+  error_type: z115.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z115.string(),
+  circuit_json: z115.array(z115.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z115 } from "zod";
-var pcb_group = z115.object({
-  type: z115.literal("pcb_group"),
+import { z as z116 } from "zod";
+var pcb_group = z116.object({
+  type: z116.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z115.string(),
-  is_subcircuit: z115.boolean().optional(),
-  subcircuit_id: z115.string().optional(),
+  source_group_id: z116.string(),
+  is_subcircuit: z116.boolean().optional(),
+  subcircuit_id: z116.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  display_offset_x: z115.string().optional().describe(
+  display_offset_x: z116.string().optional().describe(
     "How to display the x offset for this group, usually corresponding with how the user specified it"
   ),
-  display_offset_y: z115.string().optional().describe(
+  display_offset_y: z116.string().optional().describe(
     "How to display the y offset for this group, usually corresponding with how the user specified it"
   ),
-  outline: z115.array(point).optional(),
+  outline: z116.array(point).optional(),
   anchor_position: point.optional(),
   anchor_alignment: ninePointAnchor.default("center"),
-  position_mode: z115.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
-  positioned_relative_to_pcb_group_id: z115.string().optional(),
-  positioned_relative_to_pcb_board_id: z115.string().optional(),
-  pcb_component_ids: z115.array(z115.string()),
-  child_layout_mode: z115.enum(["packed", "none"]).optional(),
-  name: z115.string().optional(),
-  description: z115.string().optional(),
-  layout_mode: z115.string().optional(),
-  autorouter_configuration: z115.object({
+  position_mode: z116.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z116.string().optional(),
+  positioned_relative_to_pcb_board_id: z116.string().optional(),
+  pcb_component_ids: z116.array(z116.string()),
+  child_layout_mode: z116.enum(["packed", "none"]).optional(),
+  name: z116.string().optional(),
+  description: z116.string().optional(),
+  layout_mode: z116.string().optional(),
+  autorouter_configuration: z116.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z115.string().optional()
+  autorouter_used_string: z116.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z116 } from "zod";
-var pcb_autorouting_error = z116.object({
-  type: z116.literal("pcb_autorouting_error"),
+import { z as z117 } from "zod";
+var pcb_autorouting_error = z117.object({
+  type: z117.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z116.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z116.string(),
-  subcircuit_id: z116.string().optional()
+  error_type: z117.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z117.string(),
+  subcircuit_id: z117.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z117 } from "zod";
-var pcb_manual_edit_conflict_warning = z117.object({
-  type: z117.literal("pcb_manual_edit_conflict_warning"),
+import { z as z118 } from "zod";
+var pcb_manual_edit_conflict_warning = z118.object({
+  type: z118.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z117.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z117.string(),
-  pcb_component_id: z117.string(),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
-  source_component_id: z117.string()
+  warning_type: z118.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z118.string(),
+  pcb_component_id: z118.string(),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
+  source_component_id: z118.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z118 } from "zod";
-var pcb_breakout_point = z118.object({
-  type: z118.literal("pcb_breakout_point"),
+import { z as z119 } from "zod";
+var pcb_breakout_point = z119.object({
+  type: z119.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z118.string(),
-  subcircuit_id: z118.string().optional(),
-  source_trace_id: z118.string().optional(),
-  source_port_id: z118.string().optional(),
-  source_net_id: z118.string().optional(),
+  pcb_group_id: z119.string(),
+  subcircuit_id: z119.string().optional(),
+  source_trace_id: z119.string().optional(),
+  source_port_id: z119.string().optional(),
+  source_net_id: z119.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -2639,61 +2659,61 @@ var pcb_breakout_point = z118.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z119 } from "zod";
-var pcb_ground_plane = z119.object({
-  type: z119.literal("pcb_ground_plane"),
+import { z as z120 } from "zod";
+var pcb_ground_plane = z120.object({
+  type: z120.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z119.string(),
-  source_net_id: z119.string(),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional()
+  source_pcb_ground_plane_id: z120.string(),
+  source_net_id: z120.string(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z120 } from "zod";
-var pcb_ground_plane_region = z120.object({
-  type: z120.literal("pcb_ground_plane_region"),
+import { z as z121 } from "zod";
+var pcb_ground_plane_region = z121.object({
+  type: z121.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z120.string(),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_ground_plane_id: z121.string(),
+  pcb_group_id: z121.string().optional(),
+  subcircuit_id: z121.string().optional(),
   layer: layer_ref,
-  points: z120.array(point)
+  points: z121.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z121 } from "zod";
-var pcb_thermal_spoke = z121.object({
-  type: z121.literal("pcb_thermal_spoke"),
+import { z as z122 } from "zod";
+var pcb_thermal_spoke = z122.object({
+  type: z122.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z121.string(),
-  shape: z121.string(),
-  spoke_count: z121.number(),
+  pcb_ground_plane_id: z122.string(),
+  shape: z122.string(),
+  spoke_count: z122.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z121.string().optional(),
-  subcircuit_id: z121.string().optional()
+  pcb_plated_hole_id: z122.string().optional(),
+  subcircuit_id: z122.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z122 } from "zod";
-var pcb_copper_pour_base = z122.object({
-  type: z122.literal("pcb_copper_pour"),
+import { z as z123 } from "zod";
+var pcb_copper_pour_base = z123.object({
+  type: z123.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
   layer: layer_ref,
-  source_net_id: z122.string().optional(),
-  covered_with_solder_mask: z122.boolean().optional().default(true)
+  source_net_id: z123.string().optional(),
+  covered_with_solder_mask: z123.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z122.literal("rect"),
+  shape: z123.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2701,16 +2721,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z122.literal("brep"),
+  shape: z123.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z122.literal("polygon"),
-  points: z122.array(point)
+  shape: z123.literal("polygon"),
+  points: z123.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z122.discriminatedUnion("shape", [
+var pcb_copper_pour = z123.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -2718,148 +2738,148 @@ var pcb_copper_pour = z122.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z123 } from "zod";
-var pcb_component_outside_board_error = z123.object({
-  type: z123.literal("pcb_component_outside_board_error"),
+import { z as z124 } from "zod";
+var pcb_component_outside_board_error = z124.object({
+  type: z124.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z123.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z123.string(),
-  pcb_component_id: z123.string(),
-  pcb_board_id: z123.string(),
+  error_type: z124.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z124.string(),
+  pcb_component_id: z124.string(),
+  pcb_board_id: z124.string(),
   component_center: point,
-  component_bounds: z123.object({
-    min_x: z123.number(),
-    max_x: z123.number(),
-    min_y: z123.number(),
-    max_y: z123.number()
+  component_bounds: z124.object({
+    min_x: z124.number(),
+    max_x: z124.number(),
+    min_y: z124.number(),
+    max_y: z124.number()
   }),
-  subcircuit_id: z123.string().optional(),
-  source_component_id: z123.string().optional()
+  subcircuit_id: z124.string().optional(),
+  source_component_id: z124.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z124 } from "zod";
-var pcb_component_invalid_layer_error = z124.object({
-  type: z124.literal("pcb_component_invalid_layer_error"),
+import { z as z125 } from "zod";
+var pcb_component_invalid_layer_error = z125.object({
+  type: z125.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z124.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  message: z124.string(),
-  pcb_component_id: z124.string().optional(),
-  source_component_id: z124.string(),
+  error_type: z125.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  message: z125.string(),
+  pcb_component_id: z125.string().optional(),
+  source_component_id: z125.string(),
   layer: layer_ref,
-  subcircuit_id: z124.string().optional()
+  subcircuit_id: z125.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z125 } from "zod";
-var pcb_via_clearance_error = z125.object({
-  type: z125.literal("pcb_via_clearance_error"),
+import { z as z126 } from "zod";
+var pcb_via_clearance_error = z126.object({
+  type: z126.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z125.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z125.string(),
-  pcb_via_ids: z125.array(z125.string()).min(2),
+  error_type: z126.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z126.string(),
+  pcb_via_ids: z126.array(z126.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z125.object({
-    x: z125.number().optional(),
-    y: z125.number().optional()
+  pcb_center: z126.object({
+    x: z126.number().optional(),
+    y: z126.number().optional()
   }).optional(),
-  subcircuit_id: z125.string().optional()
+  subcircuit_id: z126.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z126 } from "zod";
-var pcb_courtyard_rect = z126.object({
-  type: z126.literal("pcb_courtyard_rect"),
+import { z as z127 } from "zod";
+var pcb_courtyard_rect = z127.object({
+  type: z127.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z126.string(),
-  pcb_group_id: z126.string().optional(),
-  subcircuit_id: z126.string().optional(),
+  pcb_component_id: z127.string(),
+  pcb_group_id: z127.string().optional(),
+  subcircuit_id: z127.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
-  color: z126.string().optional()
+  color: z127.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z127 } from "zod";
-var pcb_courtyard_outline = z127.object({
-  type: z127.literal("pcb_courtyard_outline"),
+import { z as z128 } from "zod";
+var pcb_courtyard_outline = z128.object({
+  type: z128.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z127.string(),
-  pcb_group_id: z127.string().optional(),
-  subcircuit_id: z127.string().optional(),
+  pcb_component_id: z128.string(),
+  pcb_group_id: z128.string().optional(),
+  subcircuit_id: z128.string().optional(),
   layer: visible_layer,
-  outline: z127.array(point).min(2),
+  outline: z128.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z127.boolean().optional(),
-  is_stroke_dashed: z127.boolean().optional(),
-  color: z127.string().optional()
+  is_closed: z128.boolean().optional(),
+  is_stroke_dashed: z128.boolean().optional(),
+  color: z128.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z128 } from "zod";
-var pcb_courtyard_polygon = z128.object({
-  type: z128.literal("pcb_courtyard_polygon"),
+import { z as z129 } from "zod";
+var pcb_courtyard_polygon = z129.object({
+  type: z129.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z128.string(),
-  pcb_group_id: z128.string().optional(),
-  subcircuit_id: z128.string().optional(),
+  pcb_component_id: z129.string(),
+  pcb_group_id: z129.string().optional(),
+  subcircuit_id: z129.string().optional(),
   layer: visible_layer,
-  points: z128.array(point).min(3),
-  color: z128.string().optional()
+  points: z129.array(point).min(3),
+  color: z129.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z129 } from "zod";
-var cad_component = z129.object({
-  type: z129.literal("cad_component"),
-  cad_component_id: z129.string(),
-  pcb_component_id: z129.string(),
-  source_component_id: z129.string(),
+import { z as z130 } from "zod";
+var cad_component = z130.object({
+  type: z130.literal("cad_component"),
+  cad_component_id: z130.string(),
+  pcb_component_id: z130.string(),
+  source_component_id: z130.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z129.string().optional(),
+  subcircuit_id: z130.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z129.string().optional(),
-  model_obj_url: z129.string().optional(),
-  model_stl_url: z129.string().optional(),
-  model_3mf_url: z129.string().optional(),
-  model_gltf_url: z129.string().optional(),
-  model_glb_url: z129.string().optional(),
-  model_step_url: z129.string().optional(),
-  model_wrl_url: z129.string().optional(),
-  model_unit_to_mm_scale_factor: z129.number().optional(),
-  model_jscad: z129.any().optional(),
-  show_as_translucent_model: z129.boolean().optional()
+  footprinter_string: z130.string().optional(),
+  model_obj_url: z130.string().optional(),
+  model_stl_url: z130.string().optional(),
+  model_3mf_url: z130.string().optional(),
+  model_gltf_url: z130.string().optional(),
+  model_glb_url: z130.string().optional(),
+  model_step_url: z130.string().optional(),
+  model_wrl_url: z130.string().optional(),
+  model_unit_to_mm_scale_factor: z130.number().optional(),
+  model_jscad: z130.any().optional(),
+  show_as_translucent_model: z130.boolean().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z130 } from "zod";
-var wave_shape = z130.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z130.union([z130.string(), z130.number()]).transform((val) => {
+import { z as z131 } from "zod";
+var wave_shape = z131.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z131.union([z131.string(), z131.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -2868,30 +2888,30 @@ var percentage = z130.union([z130.string(), z130.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z130.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z131.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z130.object({
-  type: z130.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z131.object({
+  type: z131.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z130.literal(true).optional().default(true),
-  positive_source_port_id: z130.string().optional(),
-  negative_source_port_id: z130.string().optional(),
-  positive_source_net_id: z130.string().optional(),
-  negative_source_net_id: z130.string().optional(),
+  is_dc_source: z131.literal(true).optional().default(true),
+  positive_source_port_id: z131.string().optional(),
+  negative_source_port_id: z131.string().optional(),
+  positive_source_net_id: z131.string().optional(),
+  negative_source_net_id: z131.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z130.object({
-  type: z130.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z131.object({
+  type: z131.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z130.literal(false),
-  terminal1_source_port_id: z130.string().optional(),
-  terminal2_source_port_id: z130.string().optional(),
-  terminal1_source_net_id: z130.string().optional(),
-  terminal2_source_net_id: z130.string().optional(),
+  is_dc_source: z131.literal(false),
+  terminal1_source_port_id: z131.string().optional(),
+  terminal2_source_port_id: z131.string().optional(),
+  terminal1_source_net_id: z131.string().optional(),
+  terminal2_source_net_id: z131.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -2899,14 +2919,14 @@ var simulation_ac_voltage_source = z130.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z130.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z131.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_current_source.ts
-import { z as z131 } from "zod";
-var percentage2 = z131.union([z131.string(), z131.number()]).transform((val) => {
+import { z as z132 } from "zod";
+var percentage2 = z132.union([z132.string(), z132.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -2915,30 +2935,30 @@ var percentage2 = z131.union([z131.string(), z131.number()]).transform((val) =>
   }
   return val;
 }).pipe(
-  z131.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z132.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_current_source = z131.object({
-  type: z131.literal("simulation_current_source"),
+var simulation_dc_current_source = z132.object({
+  type: z132.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z131.literal(true).optional().default(true),
-  positive_source_port_id: z131.string().optional(),
-  negative_source_port_id: z131.string().optional(),
-  positive_source_net_id: z131.string().optional(),
-  negative_source_net_id: z131.string().optional(),
+  is_dc_source: z132.literal(true).optional().default(true),
+  positive_source_port_id: z132.string().optional(),
+  negative_source_port_id: z132.string().optional(),
+  positive_source_net_id: z132.string().optional(),
+  negative_source_net_id: z132.string().optional(),
   current
 }).describe("Defines a DC current source for simulation");
-var simulation_ac_current_source = z131.object({
-  type: z131.literal("simulation_current_source"),
+var simulation_ac_current_source = z132.object({
+  type: z132.literal("simulation_current_source"),
   simulation_current_source_id: getZodPrefixedIdWithDefault(
     "simulation_current_source"
   ),
-  is_dc_source: z131.literal(false),
-  terminal1_source_port_id: z131.string().optional(),
-  terminal2_source_port_id: z131.string().optional(),
-  terminal1_source_net_id: z131.string().optional(),
-  terminal2_source_net_id: z131.string().optional(),
+  is_dc_source: z132.literal(false),
+  terminal1_source_port_id: z132.string().optional(),
+  terminal2_source_port_id: z132.string().optional(),
+  terminal1_source_net_id: z132.string().optional(),
+  terminal2_source_net_id: z132.string().optional(),
   current: current.optional(),
   frequency: frequency.optional(),
   peak_to_peak_current: current.optional(),
@@ -2946,25 +2966,25 @@ var simulation_ac_current_source = z131.object({
   phase: rotation.optional(),
   duty_cycle: percentage2.optional()
 }).describe("Defines an AC current source for simulation");
-var simulation_current_source = z131.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
+var simulation_current_source = z132.union([simulation_dc_current_source, simulation_ac_current_source]).describe("Defines a current source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z132 } from "zod";
-var experiment_type = z132.union([
-  z132.literal("spice_dc_sweep"),
-  z132.literal("spice_dc_operating_point"),
-  z132.literal("spice_transient_analysis"),
-  z132.literal("spice_ac_analysis")
+import { z as z133 } from "zod";
+var experiment_type = z133.union([
+  z133.literal("spice_dc_sweep"),
+  z133.literal("spice_dc_operating_point"),
+  z133.literal("spice_transient_analysis"),
+  z133.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z132.object({
-  type: z132.literal("simulation_experiment"),
+var simulation_experiment = z133.object({
+  type: z133.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z132.string(),
+  name: z133.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
@@ -2973,53 +2993,53 @@ var simulation_experiment = z132.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z133 } from "zod";
-var simulation_transient_voltage_graph = z133.object({
-  type: z133.literal("simulation_transient_voltage_graph"),
+import { z as z134 } from "zod";
+var simulation_transient_voltage_graph = z134.object({
+  type: z134.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z133.string(),
-  timestamps_ms: z133.array(z133.number()).optional(),
-  voltage_levels: z133.array(z133.number()),
-  source_component_id: z133.string().optional(),
-  subcircuit_connectivity_map_key: z133.string().optional(),
+  simulation_experiment_id: z134.string(),
+  timestamps_ms: z134.array(z134.number()).optional(),
+  voltage_levels: z134.array(z134.number()),
+  source_component_id: z134.string().optional(),
+  subcircuit_connectivity_map_key: z134.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z133.string().optional(),
-  color: z133.string().optional()
+  name: z134.string().optional(),
+  color: z134.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z134 } from "zod";
-var simulation_switch = z134.object({
-  type: z134.literal("simulation_switch"),
+import { z as z135 } from "zod";
+var simulation_switch = z135.object({
+  type: z135.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z134.string().optional(),
+  source_component_id: z135.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z134.boolean().optional(),
+  starts_closed: z135.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z135 } from "zod";
-var simulation_voltage_probe = z135.object({
-  type: z135.literal("simulation_voltage_probe"),
+import { z as z136 } from "zod";
+var simulation_voltage_probe = z136.object({
+  type: z136.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_component_id: z135.string().optional(),
-  name: z135.string().optional(),
-  signal_input_source_port_id: z135.string().optional(),
-  signal_input_source_net_id: z135.string().optional(),
-  reference_input_source_port_id: z135.string().optional(),
-  reference_input_source_net_id: z135.string().optional(),
-  subcircuit_id: z135.string().optional(),
-  color: z135.string().optional()
+  source_component_id: z136.string().optional(),
+  name: z136.string().optional(),
+  signal_input_source_port_id: z136.string().optional(),
+  signal_input_source_net_id: z136.string().optional(),
+  reference_input_source_port_id: z136.string().optional(),
+  reference_input_source_net_id: z136.string().optional(),
+  subcircuit_id: z136.string().optional(),
+  color: z136.string().optional()
 }).describe(
   "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
 ).superRefine((data, ctx) => {
@@ -3029,20 +3049,20 @@ var simulation_voltage_probe = z135.object({
     const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
     if (has_ports && has_nets) {
       ctx.addIssue({
-        code: z135.ZodIssueCode.custom,
+        code: z136.ZodIssueCode.custom,
         message: "Cannot mix port and net connections in a differential probe."
       });
     } else if (has_ports) {
       if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
         ctx.addIssue({
-          code: z135.ZodIssueCode.custom,
+          code: z136.ZodIssueCode.custom,
           message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
         });
       }
     } else if (has_nets) {
       if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
         ctx.addIssue({
-          code: z135.ZodIssueCode.custom,
+          code: z136.ZodIssueCode.custom,
           message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
         });
       }
@@ -3050,7 +3070,7 @@ var simulation_voltage_probe = z135.object({
   } else {
     if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
       ctx.addIssue({
-        code: z135.ZodIssueCode.custom,
+        code: z136.ZodIssueCode.custom,
         message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
       });
     }
@@ -3059,22 +3079,22 @@ var simulation_voltage_probe = z135.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_unknown_experiment_error.ts
-import { z as z136 } from "zod";
-var simulation_unknown_experiment_error = z136.object({
-  type: z136.literal("simulation_unknown_experiment_error"),
+import { z as z137 } from "zod";
+var simulation_unknown_experiment_error = z137.object({
+  type: z137.literal("simulation_unknown_experiment_error"),
   simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
     "simulation_unknown_experiment_error"
   ),
-  error_type: z136.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
-  message: z136.string(),
-  simulation_experiment_id: z136.string().optional(),
-  subcircuit_id: z136.string().optional()
+  error_type: z137.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  message: z137.string(),
+  simulation_experiment_id: z137.string().optional(),
+  subcircuit_id: z137.string().optional()
 }).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z137 } from "zod";
-var any_circuit_element = z137.union([
+import { z as z138 } from "zod";
+var any_circuit_element = z138.union([
   source_trace,
   source_port,
   source_component_internal_connection,
@@ -3216,6 +3236,7 @@ export {
   length,
   ms,
   ninePointAnchor,
+  pcbRenderLayer,
   pcb_autorouting_error,
   pcb_board,
   pcb_breakout_point,