circuit-json 0.0.289 → 0.0.291

package/dist/index.mjs

@@ -779,207 +779,223 @@ var source_manually_placed_via = z43.object({
 }).describe("Defines a via that is manually placed in the source domain");
 expectTypesMatch(true);
 
-// src/schematic/schematic_box.ts
+// src/source/unknown_error_finding_part.ts
 import { z as z44 } from "zod";
-var schematic_box = z44.object({
-  type: z44.literal("schematic_box"),
-  schematic_component_id: z44.string().optional(),
+var unknown_error_finding_part = z44.object({
+  type: z44.literal("unknown_error_finding_part"),
+  unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
+    "unknown_error_finding_part"
+  ),
+  error_type: z44.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  message: z44.string(),
+  source_component_id: z44.string().optional(),
+  subcircuit_id: z44.string().optional()
+}).describe(
+  "Error emitted when an unexpected error occurs while finding a part"
+);
+expectTypesMatch(true);
+
+// src/schematic/schematic_box.ts
+import { z as z45 } from "zod";
+var schematic_box = z45.object({
+  type: z45.literal("schematic_box"),
+  schematic_component_id: z45.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z44.boolean().default(false),
+  is_dashed: z45.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z44.string().optional()
+  subcircuit_id: z45.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_path.ts
-import { z as z45 } from "zod";
-var schematic_path = z45.object({
-  type: z45.literal("schematic_path"),
-  schematic_component_id: z45.string(),
-  fill_color: z45.enum(["red", "blue"]).optional(),
-  is_filled: z45.boolean().optional(),
-  points: z45.array(point),
-  subcircuit_id: z45.string().optional()
+import { z as z46 } from "zod";
+var schematic_path = z46.object({
+  type: z46.literal("schematic_path"),
+  schematic_component_id: z46.string(),
+  fill_color: z46.enum(["red", "blue"]).optional(),
+  is_filled: z46.boolean().optional(),
+  points: z46.array(point),
+  subcircuit_id: z46.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_component.ts
-import { z as z46 } from "zod";
-var schematic_pin_styles = z46.record(
-  z46.object({
+import { z as z47 } from "zod";
+var schematic_pin_styles = z47.record(
+  z47.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z46.object({
-  left_size: z46.number(),
-  right_size: z46.number(),
-  top_size: z46.number().optional(),
-  bottom_size: z46.number().optional()
+var schematic_component_port_arrangement_by_size = z47.object({
+  left_size: z47.number(),
+  right_size: z47.number(),
+  top_size: z47.number().optional(),
+  bottom_size: z47.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z46.object({
-  left_side: z46.object({
-    pins: z46.array(z46.number()),
+var schematic_component_port_arrangement_by_sides = z47.object({
+  left_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z46.object({
-    pins: z46.array(z46.number()),
+  right_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z46.object({
-    pins: z46.array(z46.number()),
+  top_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z46.object({
-    pins: z46.array(z46.number()),
+  bottom_side: z47.object({
+    pins: z47.array(z47.number()),
     // @ts-ignore
-    direction: z46.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z46.union([
+var port_arrangement = z47.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z46.object({
-  type: z46.literal("schematic_component"),
+var schematic_component = z47.object({
+  type: z47.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z46.string().optional(),
-  schematic_component_id: z46.string(),
+  source_component_id: z47.string().optional(),
+  schematic_component_id: z47.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z46.string().optional(),
+  symbol_name: z47.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z46.record(z46.string()).optional(),
-  symbol_display_value: z46.string().optional(),
-  subcircuit_id: z46.string().optional(),
-  schematic_group_id: z46.string().optional(),
-  is_schematic_group: z46.boolean().optional(),
-  source_group_id: z46.string().optional(),
-  is_box_with_pins: z46.boolean().optional().default(true)
+  port_labels: z47.record(z47.string()).optional(),
+  symbol_display_value: z47.string().optional(),
+  subcircuit_id: z47.string().optional(),
+  schematic_group_id: z47.string().optional(),
+  is_schematic_group: z47.boolean().optional(),
+  source_group_id: z47.string().optional(),
+  is_box_with_pins: z47.boolean().optional().default(true)
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_line.ts
-import { z as z47 } from "zod";
-var schematic_line = z47.object({
-  type: z47.literal("schematic_line"),
+import { z as z48 } from "zod";
+var schematic_line = z48.object({
+  type: z48.literal("schematic_line"),
   schematic_line_id: getZodPrefixedIdWithDefault("schematic_line"),
-  schematic_component_id: z47.string(),
+  schematic_component_id: z48.string(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.nullable().optional(),
-  color: z47.string().default("#000000"),
-  is_dashed: z47.boolean().default(false),
-  subcircuit_id: z47.string().optional()
+  color: z48.string().default("#000000"),
+  is_dashed: z48.boolean().default(false),
+  subcircuit_id: z48.string().optional()
 }).describe("Draws a styled line on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_rect.ts
-import { z as z48 } from "zod";
-var schematic_rect = z48.object({
-  type: z48.literal("schematic_rect"),
+import { z as z49 } from "zod";
+var schematic_rect = z49.object({
+  type: z49.literal("schematic_rect"),
   schematic_rect_id: getZodPrefixedIdWithDefault("schematic_rect"),
-  schematic_component_id: z48.string(),
+  schematic_component_id: z49.string(),
   center: point,
   width: distance,
   height: distance,
   rotation: rotation.default(0),
   stroke_width: distance.nullable().optional(),
-  color: z48.string().default("#000000"),
-  is_filled: z48.boolean().default(false),
-  fill_color: z48.string().optional(),
-  is_dashed: z48.boolean().default(false),
-  subcircuit_id: z48.string().optional()
+  color: z49.string().default("#000000"),
+  is_filled: z49.boolean().default(false),
+  fill_color: z49.string().optional(),
+  is_dashed: z49.boolean().default(false),
+  subcircuit_id: z49.string().optional()
 }).describe("Draws a styled rectangle on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_circle.ts
-import { z as z49 } from "zod";
-var schematic_circle = z49.object({
-  type: z49.literal("schematic_circle"),
+import { z as z50 } from "zod";
+var schematic_circle = z50.object({
+  type: z50.literal("schematic_circle"),
   schematic_circle_id: getZodPrefixedIdWithDefault("schematic_circle"),
-  schematic_component_id: z49.string(),
+  schematic_component_id: z50.string(),
   center: point,
   radius: distance,
   stroke_width: distance.nullable().optional(),
-  color: z49.string().default("#000000"),
-  is_filled: z49.boolean().default(false),
-  fill_color: z49.string().optional(),
-  is_dashed: z49.boolean().default(false),
-  subcircuit_id: z49.string().optional()
+  color: z50.string().default("#000000"),
+  is_filled: z50.boolean().default(false),
+  fill_color: z50.string().optional(),
+  is_dashed: z50.boolean().default(false),
+  subcircuit_id: z50.string().optional()
 }).describe("Draws a styled circle on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_arc.ts
-import { z as z50 } from "zod";
-var schematic_arc = z50.object({
-  type: z50.literal("schematic_arc"),
+import { z as z51 } from "zod";
+var schematic_arc = z51.object({
+  type: z51.literal("schematic_arc"),
   schematic_arc_id: getZodPrefixedIdWithDefault("schematic_arc"),
-  schematic_component_id: z50.string(),
+  schematic_component_id: z51.string(),
   center: point,
   radius: distance,
   start_angle_degrees: rotation,
   end_angle_degrees: rotation,
-  direction: z50.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z51.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   stroke_width: distance.nullable().optional(),
-  color: z50.string().default("#000000"),
-  is_dashed: z50.boolean().default(false),
-  subcircuit_id: z50.string().optional()
+  color: z51.string().default("#000000"),
+  is_dashed: z51.boolean().default(false),
+  subcircuit_id: z51.string().optional()
 }).describe("Draws a styled arc on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_trace.ts
-import { z as z51 } from "zod";
-var schematic_trace = z51.object({
-  type: z51.literal("schematic_trace"),
-  schematic_trace_id: z51.string(),
-  source_trace_id: z51.string().optional(),
-  junctions: z51.array(
-    z51.object({
-      x: z51.number(),
-      y: z51.number()
+import { z as z52 } from "zod";
+var schematic_trace = z52.object({
+  type: z52.literal("schematic_trace"),
+  schematic_trace_id: z52.string(),
+  source_trace_id: z52.string().optional(),
+  junctions: z52.array(
+    z52.object({
+      x: z52.number(),
+      y: z52.number()
     })
   ),
-  edges: z51.array(
-    z51.object({
-      from: z51.object({
-        x: z51.number(),
-        y: z51.number()
+  edges: z52.array(
+    z52.object({
+      from: z52.object({
+        x: z52.number(),
+        y: z52.number()
       }),
-      to: z51.object({
-        x: z51.number(),
-        y: z51.number()
+      to: z52.object({
+        x: z52.number(),
+        y: z52.number()
       }),
-      is_crossing: z51.boolean().optional(),
-      from_schematic_port_id: z51.string().optional(),
-      to_schematic_port_id: z51.string().optional()
+      is_crossing: z52.boolean().optional(),
+      from_schematic_port_id: z52.string().optional(),
+      to_schematic_port_id: z52.string().optional()
     })
   ),
-  subcircuit_id: z51.string().optional(),
+  subcircuit_id: z52.string().optional(),
   // TODO: make required in a future release
-  subcircuit_connectivity_map_key: z51.string().optional()
+  subcircuit_connectivity_map_key: z52.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-import { z as z53 } from "zod";
+import { z as z54 } from "zod";
 
 // src/common/FivePointAnchor.ts
-import { z as z52 } from "zod";
-var fivePointAnchor = z52.enum([
+import { z as z53 } from "zod";
+var fivePointAnchor = z53.enum([
   "center",
   "left",
   "right",
@@ -989,111 +1005,111 @@ var fivePointAnchor = z52.enum([
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-var schematic_text = z53.object({
-  type: z53.literal("schematic_text"),
-  schematic_component_id: z53.string().optional(),
-  schematic_text_id: z53.string(),
-  text: z53.string(),
-  font_size: z53.number().default(0.18),
-  position: z53.object({
+var schematic_text = z54.object({
+  type: z54.literal("schematic_text"),
+  schematic_component_id: z54.string().optional(),
+  schematic_text_id: z54.string(),
+  text: z54.string(),
+  font_size: z54.number().default(0.18),
+  position: z54.object({
     x: distance,
     y: distance
   }),
-  rotation: z53.number().default(0),
-  anchor: z53.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z53.string().default("#000000"),
-  subcircuit_id: z53.string().optional()
+  rotation: z54.number().default(0),
+  anchor: z54.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z54.string().default("#000000"),
+  subcircuit_id: z54.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_port.ts
-import { z as z54 } from "zod";
-var schematic_port = z54.object({
-  type: z54.literal("schematic_port"),
-  schematic_port_id: z54.string(),
-  source_port_id: z54.string(),
-  schematic_component_id: z54.string().optional(),
+import { z as z55 } from "zod";
+var schematic_port = z55.object({
+  type: z55.literal("schematic_port"),
+  schematic_port_id: z55.string(),
+  source_port_id: z55.string(),
+  schematic_component_id: z55.string().optional(),
   center: point,
-  facing_direction: z54.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z54.number().optional(),
-  side_of_component: z54.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z54.number().optional(),
-  pin_number: z54.number().optional(),
-  display_pin_label: z54.string().optional(),
-  subcircuit_id: z54.string().optional(),
-  is_connected: z54.boolean().optional(),
-  has_input_arrow: z54.boolean().optional(),
-  has_output_arrow: z54.boolean().optional()
+  facing_direction: z55.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z55.number().optional(),
+  side_of_component: z55.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z55.number().optional(),
+  pin_number: z55.number().optional(),
+  display_pin_label: z55.string().optional(),
+  subcircuit_id: z55.string().optional(),
+  is_connected: z55.boolean().optional(),
+  has_input_arrow: z55.boolean().optional(),
+  has_output_arrow: z55.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
 
 // src/schematic/schematic_net_label.ts
-import { z as z55 } from "zod";
-var schematic_net_label = z55.object({
-  type: z55.literal("schematic_net_label"),
+import { z as z56 } from "zod";
+var schematic_net_label = z56.object({
+  type: z56.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z55.string().optional(),
-  source_trace_id: z55.string().optional(),
-  source_net_id: z55.string(),
+  schematic_trace_id: z56.string().optional(),
+  source_trace_id: z56.string().optional(),
+  source_net_id: z56.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z55.enum(["top", "bottom", "left", "right"]),
-  text: z55.string(),
-  symbol_name: z55.string().optional(),
-  is_movable: z55.boolean().optional(),
-  subcircuit_id: z55.string().optional()
+  anchor_side: z56.enum(["top", "bottom", "left", "right"]),
+  text: z56.string(),
+  symbol_name: z56.string().optional(),
+  is_movable: z56.boolean().optional(),
+  subcircuit_id: z56.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_error.ts
-import { z as z56 } from "zod";
-var schematic_error = z56.object({
-  type: z56.literal("schematic_error"),
-  schematic_error_id: z56.string(),
+import { z as z57 } from "zod";
+var schematic_error = z57.object({
+  type: z57.literal("schematic_error"),
+  schematic_error_id: z57.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z56.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z56.string(),
-  subcircuit_id: z56.string().optional()
+  error_type: z57.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z57.string(),
+  subcircuit_id: z57.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_layout_error.ts
-import { z as z57 } from "zod";
-var schematic_layout_error = z57.object({
-  type: z57.literal("schematic_layout_error"),
+import { z as z58 } from "zod";
+var schematic_layout_error = z58.object({
+  type: z58.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z57.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z57.string(),
-  source_group_id: z57.string(),
-  schematic_group_id: z57.string(),
-  subcircuit_id: z57.string().optional()
+  error_type: z58.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z58.string(),
+  source_group_id: z58.string(),
+  schematic_group_id: z58.string(),
+  subcircuit_id: z58.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
 
 // src/schematic/schematic_debug_object.ts
-import { z as z58 } from "zod";
-var schematic_debug_object_base = z58.object({
-  type: z58.literal("schematic_debug_object"),
-  label: z58.string().optional(),
-  subcircuit_id: z58.string().optional()
+import { z as z59 } from "zod";
+var schematic_debug_object_base = z59.object({
+  type: z59.literal("schematic_debug_object"),
+  label: z59.string().optional(),
+  subcircuit_id: z59.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z58.literal("rect"),
+  shape: z59.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z58.literal("line"),
+  shape: z59.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z58.literal("point"),
+  shape: z59.literal("point"),
   center: point
 });
-var schematic_debug_object = z58.discriminatedUnion("shape", [
+var schematic_debug_object = z59.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
@@ -1101,162 +1117,162 @@ var schematic_debug_object = z58.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/schematic/schematic_voltage_probe.ts
-import { z as z59 } from "zod";
-var schematic_voltage_probe = z59.object({
-  type: z59.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z59.string(),
+import { z as z60 } from "zod";
+var schematic_voltage_probe = z60.object({
+  type: z60.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z60.string(),
   position: point,
-  schematic_trace_id: z59.string(),
+  schematic_trace_id: z60.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z59.string().optional()
+  subcircuit_id: z60.string().optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
 
 // src/schematic/schematic_manual_edit_conflict_warning.ts
-import { z as z60 } from "zod";
-var schematic_manual_edit_conflict_warning = z60.object({
-  type: z60.literal("schematic_manual_edit_conflict_warning"),
+import { z as z61 } from "zod";
+var schematic_manual_edit_conflict_warning = z61.object({
+  type: z61.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z60.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z60.string(),
-  schematic_component_id: z60.string(),
-  schematic_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  source_component_id: z60.string()
+  warning_type: z61.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z61.string(),
+  schematic_component_id: z61.string(),
+  schematic_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  source_component_id: z61.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_group.ts
-import { z as z61 } from "zod";
-var schematic_group = z61.object({
-  type: z61.literal("schematic_group"),
+import { z as z62 } from "zod";
+var schematic_group = z62.object({
+  type: z62.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z61.string(),
-  is_subcircuit: z61.boolean().optional(),
-  subcircuit_id: z61.string().optional(),
+  source_group_id: z62.string(),
+  is_subcircuit: z62.boolean().optional(),
+  subcircuit_id: z62.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z61.array(z61.string()),
-  show_as_schematic_box: z61.boolean().optional(),
-  name: z61.string().optional(),
-  description: z61.string().optional()
+  schematic_component_ids: z62.array(z62.string()),
+  show_as_schematic_box: z62.boolean().optional(),
+  name: z62.string().optional(),
+  description: z62.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table.ts
-import { z as z62 } from "zod";
-var schematic_table = z62.object({
-  type: z62.literal("schematic_table"),
+import { z as z63 } from "zod";
+var schematic_table = z63.object({
+  type: z63.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z62.array(distance),
-  row_heights: z62.array(distance),
+  column_widths: z63.array(distance),
+  row_heights: z63.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z62.string().optional(),
-  schematic_component_id: z62.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  schematic_component_id: z63.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table_cell.ts
-import { z as z63 } from "zod";
-var schematic_table_cell = z63.object({
-  type: z63.literal("schematic_table_cell"),
+import { z as z64 } from "zod";
+var schematic_table_cell = z64.object({
+  type: z64.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z63.string(),
-  start_row_index: z63.number(),
-  end_row_index: z63.number(),
-  start_column_index: z63.number(),
-  end_column_index: z63.number(),
-  text: z63.string().optional(),
+  schematic_table_id: z64.string(),
+  start_row_index: z64.number(),
+  end_row_index: z64.number(),
+  start_column_index: z64.number(),
+  end_column_index: z64.number(),
+  text: z64.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z63.enum(["left", "center", "right"]).optional(),
-  vertical_align: z63.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z64.enum(["left", "center", "right"]).optional(),
+  vertical_align: z64.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z63.string().optional()
+  subcircuit_id: z64.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
 
 // src/pcb/properties/brep.ts
-import { z as z64 } from "zod";
-var point_with_bulge = z64.object({
+import { z as z65 } from "zod";
+var point_with_bulge = z65.object({
   x: distance,
   y: distance,
-  bulge: z64.number().optional()
+  bulge: z65.number().optional()
 });
 expectTypesMatch(true);
-var ring = z64.object({
-  vertices: z64.array(point_with_bulge)
+var ring = z65.object({
+  vertices: z65.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z64.object({
+var brep_shape = z65.object({
   outer_ring: ring,
-  inner_rings: z64.array(ring).default([])
+  inner_rings: z65.array(ring).default([])
 });
 expectTypesMatch(true);
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z65 } from "zod";
-var pcb_route_hint = z65.object({
+import { z as z66 } from "zod";
+var pcb_route_hint = z66.object({
   x: distance,
   y: distance,
-  via: z65.boolean().optional(),
+  via: z66.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z65.array(pcb_route_hint);
+var pcb_route_hints = z66.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z66 } from "zod";
-var route_hint_point = z66.object({
+import { z as z67 } from "zod";
+var route_hint_point = z67.object({
   x: distance,
   y: distance,
-  via: z66.boolean().optional(),
+  via: z67.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_component.ts
-import { z as z67 } from "zod";
-var pcb_component = z67.object({
-  type: z67.literal("pcb_component"),
+import { z as z68 } from "zod";
+var pcb_component = z68.object({
+  type: z68.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z67.string(),
+  source_component_id: z68.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  do_not_place: z67.boolean().optional(),
-  subcircuit_id: z67.string().optional(),
-  pcb_group_id: z67.string().optional(),
-  obstructs_within_bounds: z67.boolean().default(true).describe(
+  do_not_place: z68.boolean().optional(),
+  subcircuit_id: z68.string().optional(),
+  pcb_group_id: z68.string().optional(),
+  obstructs_within_bounds: z68.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z68 } from "zod";
-var pcb_hole_circle_or_square = z68.object({
-  type: z68.literal("pcb_hole"),
+import { z as z69 } from "zod";
+var pcb_hole_circle_or_square = z69.object({
+  type: z69.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.enum(["circle", "square"]),
-  hole_diameter: z68.number(),
+  pcb_group_id: z69.string().optional(),
+  subcircuit_id: z69.string().optional(),
+  hole_shape: z69.enum(["circle", "square"]),
+  hole_diameter: z69.number(),
   x: distance,
   y: distance
 });
@@ -1264,14 +1280,14 @@ var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_oval = z69.object({
+  type: z69.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("oval"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z69.string().optional(),
+  subcircuit_id: z69.string().optional(),
+  hole_shape: z69.literal("oval"),
+  hole_width: z69.number(),
+  hole_height: z69.number(),
   x: distance,
   y: distance
 });
@@ -1279,14 +1295,14 @@ var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_pill = z69.object({
+  type: z69.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("pill"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z69.string().optional(),
+  subcircuit_id: z69.string().optional(),
+  hole_shape: z69.literal("pill"),
+  hole_width: z69.number(),
+  hole_height: z69.number(),
   x: distance,
   y: distance
 });
@@ -1294,14 +1310,14 @@ var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z68.object({
-  type: z68.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z69.object({
+  type: z69.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
-  hole_shape: z68.literal("rotated_pill"),
-  hole_width: z68.number(),
-  hole_height: z68.number(),
+  pcb_group_id: z69.string().optional(),
+  subcircuit_id: z69.string().optional(),
+  hole_shape: z69.literal("rotated_pill"),
+  hole_width: z69.number(),
+  hole_height: z69.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation
@@ -1313,108 +1329,108 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z69 } from "zod";
-var pcb_plated_hole_circle = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("circle"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  outer_diameter: z69.number(),
-  hole_diameter: z69.number(),
+import { z as z70 } from "zod";
+var pcb_plated_hole_circle = z70.object({
+  type: z70.literal("pcb_plated_hole"),
+  shape: z70.literal("circle"),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  outer_diameter: z70.number(),
+  hole_diameter: z70.number(),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z70.array(layer_ref),
+  port_hints: z70.array(z70.string()).optional(),
+  pcb_component_id: z70.string().optional(),
+  pcb_port_id: z70.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole_oval = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.enum(["oval", "pill"]),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  outer_width: z69.number(),
-  outer_height: z69.number(),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
+var pcb_plated_hole_oval = z70.object({
+  type: z70.literal("pcb_plated_hole"),
+  shape: z70.enum(["oval", "pill"]),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  outer_width: z70.number(),
+  outer_height: z70.number(),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z70.array(layer_ref),
+  port_hints: z70.array(z70.string()).optional(),
+  pcb_component_id: z70.string().optional(),
+  pcb_port_id: z70.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_circular_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("circle"),
-  pad_shape: z69.literal("rect"),
-  hole_diameter: z69.number(),
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+var pcb_circular_hole_with_rect_pad = z70.object({
+  type: z70.literal("pcb_plated_hole"),
+  shape: z70.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("circle"),
+  pad_shape: z70.literal("rect"),
+  hole_diameter: z70.number(),
+  rect_pad_width: z70.number(),
+  rect_pad_height: z70.number(),
+  rect_border_radius: z70.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z70.array(layer_ref),
+  port_hints: z70.array(z70.string()).optional(),
+  pcb_component_id: z70.string().optional(),
+  pcb_port_id: z70.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_pill_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("pill"),
-  pad_shape: z69.literal("rect"),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+var pcb_pill_hole_with_rect_pad = z70.object({
+  type: z70.literal("pcb_plated_hole"),
+  shape: z70.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("pill"),
+  pad_shape: z70.literal("rect"),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
+  rect_pad_width: z70.number(),
+  rect_pad_height: z70.number(),
+  rect_border_radius: z70.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z70.array(layer_ref),
+  port_hints: z70.array(z70.string()).optional(),
+  pcb_component_id: z70.string().optional(),
+  pcb_port_id: z70.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_rotated_pill_hole_with_rect_pad = z69.object({
-  type: z69.literal("pcb_plated_hole"),
-  shape: z69.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  hole_shape: z69.literal("rotated_pill"),
-  pad_shape: z69.literal("rect"),
-  hole_width: z69.number(),
-  hole_height: z69.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z70.object({
+  type: z70.literal("pcb_plated_hole"),
+  shape: z70.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  hole_shape: z70.literal("rotated_pill"),
+  pad_shape: z70.literal("rect"),
+  hole_width: z70.number(),
+  hole_height: z70.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z69.number(),
-  rect_pad_height: z69.number(),
-  rect_border_radius: z69.number().optional(),
+  rect_pad_width: z70.number(),
+  rect_pad_height: z70.number(),
+  rect_border_radius: z70.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
   x: distance,
   y: distance,
-  layers: z69.array(layer_ref),
-  port_hints: z69.array(z69.string()).optional(),
-  pcb_component_id: z69.string().optional(),
-  pcb_port_id: z69.string().optional(),
+  layers: z70.array(layer_ref),
+  port_hints: z70.array(z70.string()).optional(),
+  pcb_component_id: z70.string().optional(),
+  pcb_port_id: z70.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole = z69.union([
+var pcb_plated_hole = z70.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -1430,124 +1446,124 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z70 } from "zod";
-var pcb_port = z70.object({
-  type: z70.literal("pcb_port"),
+import { z as z71 } from "zod";
+var pcb_port = z71.object({
+  type: z71.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  source_port_id: z70.string(),
-  pcb_component_id: z70.string(),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  source_port_id: z71.string(),
+  pcb_component_id: z71.string(),
   x: distance,
   y: distance,
-  layers: z70.array(layer_ref),
-  is_board_pinout: z70.boolean().optional()
+  layers: z71.array(layer_ref),
+  is_board_pinout: z71.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z71 } from "zod";
-var pcb_smtpad_circle = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("circle"),
+import { z as z72 } from "zod";
+var pcb_smtpad_circle = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
   x: distance,
   y: distance,
-  radius: z71.number(),
+  radius: z72.number(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rect = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rect"),
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
+});
+var pcb_smtpad_rect = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  rect_border_radius: z71.number().optional(),
-  corner_radius: z71.number().optional(),
+  width: z72.number(),
+  height: z72.number(),
+  rect_border_radius: z72.number().optional(),
+  corner_radius: z72.number().optional(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rotated_rect = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rotated_rect"),
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
+});
+var pcb_smtpad_rotated_rect = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  rect_border_radius: z71.number().optional(),
-  corner_radius: z71.number().optional(),
+  width: z72.number(),
+  height: z72.number(),
+  rect_border_radius: z72.number().optional(),
+  corner_radius: z72.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_pill = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("pill"),
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
+});
+var pcb_smtpad_pill = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  radius: z71.number(),
+  width: z72.number(),
+  height: z72.number(),
+  radius: z72.number(),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_rotated_pill = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("rotated_pill"),
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
+});
+var pcb_smtpad_rotated_pill = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
   x: distance,
   y: distance,
-  width: z71.number(),
-  height: z71.number(),
-  radius: z71.number(),
+  width: z72.number(),
+  height: z72.number(),
+  radius: z72.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
-});
-var pcb_smtpad_polygon = z71.object({
-  type: z71.literal("pcb_smtpad"),
-  shape: z71.literal("polygon"),
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
+});
+var pcb_smtpad_polygon = z72.object({
+  type: z72.literal("pcb_smtpad"),
+  shape: z72.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  points: z71.array(point),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  points: z72.array(point),
   layer: layer_ref,
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  is_covered_with_solder_mask: z71.boolean().optional()
+  port_hints: z72.array(z72.string()).optional(),
+  pcb_component_id: z72.string().optional(),
+  pcb_port_id: z72.string().optional(),
+  is_covered_with_solder_mask: z72.boolean().optional()
 });
-var pcb_smtpad = z71.discriminatedUnion("shape", [
+var pcb_smtpad = z72.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -1563,79 +1579,79 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z72 } from "zod";
-var pcb_solder_paste_circle = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("circle"),
+import { z as z73 } from "zod";
+var pcb_solder_paste_circle = z73.object({
+  type: z73.literal("pcb_solder_paste"),
+  shape: z73.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  radius: z72.number(),
+  radius: z73.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z73.string().optional(),
+  pcb_smtpad_id: z73.string().optional()
 });
-var pcb_solder_paste_rect = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("rect"),
+var pcb_solder_paste_rect = z73.object({
+  type: z73.literal("pcb_solder_paste"),
+  shape: z73.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z73.number(),
+  height: z73.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z73.string().optional(),
+  pcb_smtpad_id: z73.string().optional()
 });
-var pcb_solder_paste_pill = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("pill"),
+var pcb_solder_paste_pill = z73.object({
+  type: z73.literal("pcb_solder_paste"),
+  shape: z73.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
-  radius: z72.number(),
+  width: z73.number(),
+  height: z73.number(),
+  radius: z73.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z73.string().optional(),
+  pcb_smtpad_id: z73.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z73.object({
+  type: z73.literal("pcb_solder_paste"),
+  shape: z73.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z73.number(),
+  height: z73.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z73.string().optional(),
+  pcb_smtpad_id: z73.string().optional()
 });
-var pcb_solder_paste_oval = z72.object({
-  type: z72.literal("pcb_solder_paste"),
-  shape: z72.literal("oval"),
+var pcb_solder_paste_oval = z73.object({
+  type: z73.literal("pcb_solder_paste"),
+  shape: z73.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   x: distance,
   y: distance,
-  width: z72.number(),
-  height: z72.number(),
+  width: z73.number(),
+  height: z73.number(),
   layer: layer_ref,
-  pcb_component_id: z72.string().optional(),
-  pcb_smtpad_id: z72.string().optional()
+  pcb_component_id: z73.string().optional(),
+  pcb_smtpad_id: z73.string().optional()
 });
-var pcb_solder_paste = z72.union([
+var pcb_solder_paste = z73.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -1651,145 +1667,145 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z73 } from "zod";
-var pcb_text = z73.object({
-  type: z73.literal("pcb_text"),
+import { z as z74 } from "zod";
+var pcb_text = z74.object({
+  type: z74.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
-  text: z73.string(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  text: z74.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z73.number(),
+  lines: z74.number(),
   // @ts-ignore
-  align: z73.enum(["bottom-left"])
+  align: z74.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z74 } from "zod";
-var pcb_trace_route_point_wire = z74.object({
-  route_type: z74.literal("wire"),
+import { z as z75 } from "zod";
+var pcb_trace_route_point_wire = z75.object({
+  route_type: z75.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z74.string().optional(),
-  end_pcb_port_id: z74.string().optional(),
+  start_pcb_port_id: z75.string().optional(),
+  end_pcb_port_id: z75.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z74.object({
-  route_type: z74.literal("via"),
+var pcb_trace_route_point_via = z75.object({
+  route_type: z75.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z74.string(),
-  to_layer: z74.string()
+  from_layer: z75.string(),
+  to_layer: z75.string()
 });
-var pcb_trace_route_point = z74.union([
+var pcb_trace_route_point = z75.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z74.object({
-  type: z74.literal("pcb_trace"),
-  source_trace_id: z74.string().optional(),
-  pcb_component_id: z74.string().optional(),
+var pcb_trace = z75.object({
+  type: z75.literal("pcb_trace"),
+  source_trace_id: z75.string().optional(),
+  pcb_component_id: z75.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
-  route_thickness_mode: z74.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z74.number().optional(),
-  should_round_corners: z74.boolean().optional(),
-  trace_length: z74.number().optional(),
-  highlight_color: z74.string().optional(),
-  route: z74.array(pcb_trace_route_point)
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
+  route_thickness_mode: z75.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z75.number().optional(),
+  should_round_corners: z75.boolean().optional(),
+  trace_length: z75.number().optional(),
+  highlight_color: z75.string().optional(),
+  route: z75.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z75 } from "zod";
-var pcb_trace_error = z75.object({
-  type: z75.literal("pcb_trace_error"),
+import { z as z76 } from "zod";
+var pcb_trace_error = z76.object({
+  type: z76.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z75.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z75.string(),
+  error_type: z76.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z76.string(),
   center: point.optional(),
-  pcb_trace_id: z75.string(),
-  source_trace_id: z75.string(),
-  pcb_component_ids: z75.array(z75.string()),
-  pcb_port_ids: z75.array(z75.string()),
-  subcircuit_id: z75.string().optional()
+  pcb_trace_id: z76.string(),
+  source_trace_id: z76.string(),
+  pcb_component_ids: z76.array(z76.string()),
+  pcb_port_ids: z76.array(z76.string()),
+  subcircuit_id: z76.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z76 } from "zod";
-var pcb_trace_missing_error = z76.object({
-  type: z76.literal("pcb_trace_missing_error"),
+import { z as z77 } from "zod";
+var pcb_trace_missing_error = z77.object({
+  type: z77.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z76.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z76.string(),
+  error_type: z77.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z77.string(),
   center: point.optional(),
-  source_trace_id: z76.string(),
-  pcb_component_ids: z76.array(z76.string()),
-  pcb_port_ids: z76.array(z76.string()),
-  subcircuit_id: z76.string().optional()
+  source_trace_id: z77.string(),
+  pcb_component_ids: z77.array(z77.string()),
+  pcb_port_ids: z77.array(z77.string()),
+  subcircuit_id: z77.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z77 } from "zod";
-var pcb_port_not_matched_error = z77.object({
-  type: z77.literal("pcb_port_not_matched_error"),
+import { z as z78 } from "zod";
+var pcb_port_not_matched_error = z78.object({
+  type: z78.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z77.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z77.string(),
-  pcb_component_ids: z77.array(z77.string()),
-  subcircuit_id: z77.string().optional()
+  error_type: z78.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z78.string(),
+  pcb_component_ids: z78.array(z78.string()),
+  subcircuit_id: z78.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z78 } from "zod";
-var pcb_port_not_connected_error = z78.object({
-  type: z78.literal("pcb_port_not_connected_error"),
+import { z as z79 } from "zod";
+var pcb_port_not_connected_error = z79.object({
+  type: z79.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z78.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z78.string(),
-  pcb_port_ids: z78.array(z78.string()),
-  pcb_component_ids: z78.array(z78.string()),
-  subcircuit_id: z78.string().optional()
+  error_type: z79.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z79.string(),
+  pcb_port_ids: z79.array(z79.string()),
+  pcb_component_ids: z79.array(z79.string()),
+  subcircuit_id: z79.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_net.ts
-import { z as z79 } from "zod";
-var pcb_net = z79.object({
-  type: z79.literal("pcb_net"),
+import { z as z80 } from "zod";
+var pcb_net = z80.object({
+  type: z80.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z79.string().optional(),
-  highlight_color: z79.string().optional()
+  source_net_id: z80.string().optional(),
+  highlight_color: z80.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z80 } from "zod";
-var pcb_via = z80.object({
-  type: z80.literal("pcb_via"),
+import { z as z81 } from "zod";
+var pcb_via = z81.object({
+  type: z81.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z80.string().optional(),
-  subcircuit_id: z80.string().optional(),
+  pcb_group_id: z81.string().optional(),
+  subcircuit_id: z81.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -1798,71 +1814,71 @@ var pcb_via = z80.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z80.array(layer_ref),
-  pcb_trace_id: z80.string().optional()
+  layers: z81.array(layer_ref),
+  pcb_trace_id: z81.string().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z81 } from "zod";
-var pcb_board = z81.object({
-  type: z81.literal("pcb_board"),
+import { z as z82 } from "zod";
+var pcb_board = z82.object({
+  type: z82.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z81.string().optional(),
-  is_subcircuit: z81.boolean().optional(),
-  subcircuit_id: z81.string().optional(),
+  pcb_panel_id: z82.string().optional(),
+  is_subcircuit: z82.boolean().optional(),
+  subcircuit_id: z82.string().optional(),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z81.number().optional().default(4),
-  outline: z81.array(point).optional(),
-  material: z81.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z82.number().optional().default(4),
+  outline: z82.array(point).optional(),
+  material: z82.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_panel.ts
-import { z as z82 } from "zod";
-var pcb_panel = z82.object({
-  type: z82.literal("pcb_panel"),
+import { z as z83 } from "zod";
+var pcb_panel = z83.object({
+  type: z83.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
-  covered_with_solder_mask: z82.boolean().optional().default(true)
+  covered_with_solder_mask: z83.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z83 } from "zod";
-var pcb_placement_error = z83.object({
-  type: z83.literal("pcb_placement_error"),
+import { z as z84 } from "zod";
+var pcb_placement_error = z84.object({
+  type: z84.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z83.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z83.string(),
-  subcircuit_id: z83.string().optional()
+  error_type: z84.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z84.string(),
+  subcircuit_id: z84.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z84 } from "zod";
-var pcb_trace_hint = z84.object({
-  type: z84.literal("pcb_trace_hint"),
+import { z as z85 } from "zod";
+var pcb_trace_hint = z85.object({
+  type: z85.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z84.string(),
-  pcb_component_id: z84.string(),
-  route: z84.array(route_hint_point),
-  subcircuit_id: z84.string().optional()
+  pcb_port_id: z85.string(),
+  pcb_component_id: z85.string(),
+  route: z85.array(route_hint_point),
+  subcircuit_id: z85.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z85 } from "zod";
-var pcb_silkscreen_line = z85.object({
-  type: z85.literal("pcb_silkscreen_line"),
+import { z as z86 } from "zod";
+var pcb_silkscreen_line = z86.object({
+  type: z86.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z85.string(),
-  pcb_group_id: z85.string().optional(),
-  subcircuit_id: z85.string().optional(),
+  pcb_component_id: z86.string(),
+  pcb_group_id: z86.string().optional(),
+  subcircuit_id: z86.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -1873,32 +1889,32 @@ var pcb_silkscreen_line = z85.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z86 } from "zod";
-var pcb_silkscreen_path = z86.object({
-  type: z86.literal("pcb_silkscreen_path"),
+import { z as z87 } from "zod";
+var pcb_silkscreen_path = z87.object({
+  type: z87.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z86.string(),
-  pcb_group_id: z86.string().optional(),
-  subcircuit_id: z86.string().optional(),
+  pcb_component_id: z87.string(),
+  pcb_group_id: z87.string().optional(),
+  subcircuit_id: z87.string().optional(),
   layer: visible_layer,
-  route: z86.array(point),
+  route: z87.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z87 } from "zod";
-var pcb_silkscreen_text = z87.object({
-  type: z87.literal("pcb_silkscreen_text"),
+import { z as z88 } from "zod";
+var pcb_silkscreen_text = z88.object({
+  type: z88.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z87.string().optional(),
-  subcircuit_id: z87.string().optional(),
-  font: z87.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z88.string().optional(),
+  subcircuit_id: z88.string().optional(),
+  font: z88.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z87.string(),
-  text: z87.string(),
-  is_knockout: z87.boolean().default(false).optional(),
-  knockout_padding: z87.object({
+  pcb_component_id: z88.string(),
+  text: z88.string(),
+  is_knockout: z88.boolean().default(false).optional(),
+  knockout_padding: z88.object({
     left: length,
     top: length,
     bottom: length,
@@ -1909,43 +1925,43 @@ var pcb_silkscreen_text = z87.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z87.number().optional(),
+  ccw_rotation: z88.number().optional(),
   layer: layer_ref,
-  is_mirrored: z87.boolean().default(false).optional(),
+  is_mirrored: z88.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z88 } from "zod";
-var pcb_silkscreen_rect = z88.object({
-  type: z88.literal("pcb_silkscreen_rect"),
+import { z as z89 } from "zod";
+var pcb_silkscreen_rect = z89.object({
+  type: z89.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z88.string(),
-  pcb_group_id: z88.string().optional(),
-  subcircuit_id: z88.string().optional(),
+  pcb_component_id: z89.string(),
+  pcb_group_id: z89.string().optional(),
+  subcircuit_id: z89.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
-  is_filled: z88.boolean().default(true).optional(),
-  has_stroke: z88.boolean().optional(),
-  is_stroke_dashed: z88.boolean().optional()
+  is_filled: z89.boolean().default(true).optional(),
+  has_stroke: z89.boolean().optional(),
+  is_stroke_dashed: z89.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z89 } from "zod";
-var pcb_silkscreen_circle = z89.object({
-  type: z89.literal("pcb_silkscreen_circle"),
+import { z as z90 } from "zod";
+var pcb_silkscreen_circle = z90.object({
+  type: z90.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z89.string(),
-  pcb_group_id: z89.string().optional(),
-  subcircuit_id: z89.string().optional(),
+  pcb_component_id: z90.string(),
+  pcb_group_id: z90.string().optional(),
+  subcircuit_id: z90.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
@@ -1954,13 +1970,13 @@ var pcb_silkscreen_circle = z89.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z90 } from "zod";
-var pcb_silkscreen_oval = z90.object({
-  type: z90.literal("pcb_silkscreen_oval"),
+import { z as z91 } from "zod";
+var pcb_silkscreen_oval = z91.object({
+  type: z91.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z90.string(),
-  pcb_group_id: z90.string().optional(),
-  subcircuit_id: z90.string().optional(),
+  pcb_component_id: z91.string(),
+  pcb_group_id: z91.string().optional(),
+  subcircuit_id: z91.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -1969,233 +1985,241 @@ var pcb_silkscreen_oval = z90.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z91 } from "zod";
-var pcb_fabrication_note_text = z91.object({
-  type: z91.literal("pcb_fabrication_note_text"),
+import { z as z92 } from "zod";
+var pcb_fabrication_note_text = z92.object({
+  type: z92.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z91.string().optional(),
-  pcb_group_id: z91.string().optional(),
-  font: z91.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z92.string().optional(),
+  pcb_group_id: z92.string().optional(),
+  font: z92.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z91.string(),
-  text: z91.string(),
+  pcb_component_id: z92.string(),
+  text: z92.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z91.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z91.string().optional()
+  anchor_alignment: z92.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z92.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z92 } from "zod";
-var pcb_fabrication_note_path = z92.object({
-  type: z92.literal("pcb_fabrication_note_path"),
+import { z as z93 } from "zod";
+var pcb_fabrication_note_path = z93.object({
+  type: z93.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z92.string(),
-  subcircuit_id: z92.string().optional(),
+  pcb_component_id: z93.string(),
+  subcircuit_id: z93.string().optional(),
   layer: layer_ref,
-  route: z92.array(point),
+  route: z93.array(point),
   stroke_width: length,
-  color: z92.string().optional()
+  color: z93.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_rect.ts
-import { z as z93 } from "zod";
-var pcb_fabrication_note_rect = z93.object({
-  type: z93.literal("pcb_fabrication_note_rect"),
+import { z as z94 } from "zod";
+var pcb_fabrication_note_rect = z94.object({
+  type: z94.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z93.string(),
-  pcb_group_id: z93.string().optional(),
-  subcircuit_id: z93.string().optional(),
+  pcb_component_id: z94.string(),
+  pcb_group_id: z94.string().optional(),
+  subcircuit_id: z94.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
-  is_filled: z93.boolean().optional(),
-  has_stroke: z93.boolean().optional(),
-  is_stroke_dashed: z93.boolean().optional(),
-  color: z93.string().optional()
+  is_filled: z94.boolean().optional(),
+  has_stroke: z94.boolean().optional(),
+  is_stroke_dashed: z94.boolean().optional(),
+  color: z94.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_dimension.ts
-import { z as z94 } from "zod";
-var pcb_fabrication_note_dimension = z94.object({
-  type: z94.literal("pcb_fabrication_note_dimension"),
+import { z as z95 } from "zod";
+var pcb_fabrication_note_dimension = z95.object({
+  type: z95.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z94.string(),
-  pcb_group_id: z94.string().optional(),
-  subcircuit_id: z94.string().optional(),
+  pcb_component_id: z95.string(),
+  pcb_group_id: z95.string().optional(),
+  subcircuit_id: z95.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z94.string().optional(),
+  text: z95.string().optional(),
   offset: length.optional(),
-  font: z94.literal("tscircuit2024").default("tscircuit2024"),
+  font: z95.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z94.string().optional(),
+  color: z95.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_text.ts
-import { z as z95 } from "zod";
-var pcb_note_text = z95.object({
-  type: z95.literal("pcb_note_text"),
+import { z as z96 } from "zod";
+var pcb_note_text = z96.object({
+  type: z96.literal("pcb_note_text"),
   pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z95.string().optional(),
-  pcb_group_id: z95.string().optional(),
-  subcircuit_id: z95.string().optional(),
-  font: z95.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_component_id: z96.string().optional(),
+  pcb_group_id: z96.string().optional(),
+  subcircuit_id: z96.string().optional(),
+  name: z96.string().optional(),
+  font: z96.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  text: z95.string(),
+  text: z96.string().optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z95.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z95.string().optional()
+  anchor_alignment: z96.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z96.string().optional()
 }).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_rect.ts
-import { z as z96 } from "zod";
-var pcb_note_rect = z96.object({
-  type: z96.literal("pcb_note_rect"),
+import { z as z97 } from "zod";
+var pcb_note_rect = z97.object({
+  type: z97.literal("pcb_note_rect"),
   pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
-  pcb_component_id: z96.string().optional(),
-  pcb_group_id: z96.string().optional(),
-  subcircuit_id: z96.string().optional(),
+  pcb_component_id: z97.string().optional(),
+  pcb_group_id: z97.string().optional(),
+  subcircuit_id: z97.string().optional(),
+  name: z97.string().optional(),
+  text: z97.string().optional(),
   center: point,
   width: length,
   height: length,
   stroke_width: length.default("0.1mm"),
-  is_filled: z96.boolean().optional(),
-  has_stroke: z96.boolean().optional(),
-  is_stroke_dashed: z96.boolean().optional(),
-  color: z96.string().optional()
+  is_filled: z97.boolean().optional(),
+  has_stroke: z97.boolean().optional(),
+  is_stroke_dashed: z97.boolean().optional(),
+  color: z97.string().optional()
 }).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_path.ts
-import { z as z97 } from "zod";
-var pcb_note_path = z97.object({
-  type: z97.literal("pcb_note_path"),
+import { z as z98 } from "zod";
+var pcb_note_path = z98.object({
+  type: z98.literal("pcb_note_path"),
   pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
-  pcb_component_id: z97.string().optional(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
-  route: z97.array(point),
+  pcb_component_id: z98.string().optional(),
+  pcb_group_id: z98.string().optional(),
+  subcircuit_id: z98.string().optional(),
+  name: z98.string().optional(),
+  text: z98.string().optional(),
+  route: z98.array(point),
   stroke_width: length.default("0.1mm"),
-  color: z97.string().optional()
+  color: z98.string().optional()
 }).describe("Defines a polyline documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_line.ts
-import { z as z98 } from "zod";
-var pcb_note_line = z98.object({
-  type: z98.literal("pcb_note_line"),
+import { z as z99 } from "zod";
+var pcb_note_line = z99.object({
+  type: z99.literal("pcb_note_line"),
   pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
-  pcb_component_id: z98.string().optional(),
-  pcb_group_id: z98.string().optional(),
-  subcircuit_id: z98.string().optional(),
+  pcb_component_id: z99.string().optional(),
+  pcb_group_id: z99.string().optional(),
+  subcircuit_id: z99.string().optional(),
+  name: z99.string().optional(),
+  text: z99.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z98.string().optional(),
-  is_dashed: z98.boolean().optional()
+  color: z99.string().optional(),
+  is_dashed: z99.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z99 } from "zod";
-var pcb_note_dimension = z99.object({
-  type: z99.literal("pcb_note_dimension"),
+import { z as z100 } from "zod";
+var pcb_note_dimension = z100.object({
+  type: z100.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z99.string().optional(),
-  pcb_group_id: z99.string().optional(),
-  subcircuit_id: z99.string().optional(),
+  pcb_component_id: z100.string().optional(),
+  pcb_group_id: z100.string().optional(),
+  subcircuit_id: z100.string().optional(),
+  name: z100.string().optional(),
   from: point,
   to: point,
-  text: z99.string().optional(),
-  font: z99.literal("tscircuit2024").default("tscircuit2024"),
+  text: z100.string().optional(),
+  font: z100.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z99.string().optional(),
+  color: z100.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z100 } from "zod";
-var pcb_footprint_overlap_error = z100.object({
-  type: z100.literal("pcb_footprint_overlap_error"),
+import { z as z101 } from "zod";
+var pcb_footprint_overlap_error = z101.object({
+  type: z101.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z100.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z100.string(),
-  pcb_smtpad_ids: z100.array(z100.string()).optional(),
-  pcb_plated_hole_ids: z100.array(z100.string()).optional(),
-  pcb_hole_ids: z100.array(z100.string()).optional(),
-  pcb_keepout_ids: z100.array(z100.string()).optional()
+  error_type: z101.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z101.string(),
+  pcb_smtpad_ids: z101.array(z101.string()).optional(),
+  pcb_plated_hole_ids: z101.array(z101.string()).optional(),
+  pcb_hole_ids: z101.array(z101.string()).optional(),
+  pcb_keepout_ids: z101.array(z101.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z101 } from "zod";
-var pcb_keepout = z101.object({
-  type: z101.literal("pcb_keepout"),
-  shape: z101.literal("rect"),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
+import { z as z102 } from "zod";
+var pcb_keepout = z102.object({
+  type: z102.literal("pcb_keepout"),
+  shape: z102.literal("rect"),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z101.string(),
-  layers: z101.array(z101.string()),
+  pcb_keepout_id: z102.string(),
+  layers: z102.array(z102.string()),
   // Specify layers where the keepout applies
-  description: z101.string().optional()
+  description: z102.string().optional()
   // Optional description of the keepout
 }).or(
-  z101.object({
-    type: z101.literal("pcb_keepout"),
-    shape: z101.literal("circle"),
-    pcb_group_id: z101.string().optional(),
-    subcircuit_id: z101.string().optional(),
+  z102.object({
+    type: z102.literal("pcb_keepout"),
+    shape: z102.literal("circle"),
+    pcb_group_id: z102.string().optional(),
+    subcircuit_id: z102.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z101.string(),
-    layers: z101.array(z101.string()),
+    pcb_keepout_id: z102.string(),
+    layers: z102.array(z102.string()),
     // Specify layers where the keepout applies
-    description: z101.string().optional()
+    description: z102.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z102 } from "zod";
-var pcb_cutout_base = z102.object({
-  type: z102.literal("pcb_cutout"),
+import { z as z103 } from "zod";
+var pcb_cutout_base = z103.object({
+  type: z103.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional()
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z102.literal("rect"),
+  shape: z103.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2203,17 +2227,17 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z102.literal("circle"),
+  shape: z103.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z102.literal("polygon"),
-  points: z102.array(point)
+  shape: z103.literal("polygon"),
+  points: z103.array(point)
 });
 expectTypesMatch(true);
-var pcb_cutout = z102.discriminatedUnion("shape", [
+var pcb_cutout = z103.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon
@@ -2221,120 +2245,120 @@ var pcb_cutout = z102.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z103 } from "zod";
-var pcb_missing_footprint_error = z103.object({
-  type: z103.literal("pcb_missing_footprint_error"),
+import { z as z104 } from "zod";
+var pcb_missing_footprint_error = z104.object({
+  type: z104.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
-  error_type: z103.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z103.string(),
-  message: z103.string()
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
+  error_type: z104.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z104.string(),
+  message: z104.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z104 } from "zod";
-var external_footprint_load_error = z104.object({
-  type: z104.literal("external_footprint_load_error"),
+import { z as z105 } from "zod";
+var external_footprint_load_error = z105.object({
+  type: z105.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z104.string(),
-  source_component_id: z104.string(),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
-  footprinter_string: z104.string().optional(),
-  error_type: z104.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z104.string()
+  pcb_component_id: z105.string(),
+  source_component_id: z105.string(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
+  footprinter_string: z105.string().optional(),
+  error_type: z105.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z105.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z105 } from "zod";
-var circuit_json_footprint_load_error = z105.object({
-  type: z105.literal("circuit_json_footprint_load_error"),
+import { z as z106 } from "zod";
+var circuit_json_footprint_load_error = z106.object({
+  type: z106.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z105.string(),
-  source_component_id: z105.string(),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional(),
-  error_type: z105.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z105.string(),
-  circuit_json: z105.array(z105.any()).optional()
+  pcb_component_id: z106.string(),
+  source_component_id: z106.string(),
+  pcb_group_id: z106.string().optional(),
+  subcircuit_id: z106.string().optional(),
+  error_type: z106.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z106.string(),
+  circuit_json: z106.array(z106.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z106 } from "zod";
-var pcb_group = z106.object({
-  type: z106.literal("pcb_group"),
+import { z as z107 } from "zod";
+var pcb_group = z107.object({
+  type: z107.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z106.string(),
-  is_subcircuit: z106.boolean().optional(),
-  subcircuit_id: z106.string().optional(),
+  source_group_id: z107.string(),
+  is_subcircuit: z107.boolean().optional(),
+  subcircuit_id: z107.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  outline: z106.array(point).optional(),
+  outline: z107.array(point).optional(),
   anchor_position: point.optional(),
-  anchor_alignment: z106.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
-  pcb_component_ids: z106.array(z106.string()),
-  name: z106.string().optional(),
-  description: z106.string().optional(),
-  layout_mode: z106.string().optional(),
-  autorouter_configuration: z106.object({
+  anchor_alignment: z107.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
+  pcb_component_ids: z107.array(z107.string()),
+  name: z107.string().optional(),
+  description: z107.string().optional(),
+  layout_mode: z107.string().optional(),
+  autorouter_configuration: z107.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z106.string().optional()
+  autorouter_used_string: z107.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z107 } from "zod";
-var pcb_autorouting_error = z107.object({
-  type: z107.literal("pcb_autorouting_error"),
+import { z as z108 } from "zod";
+var pcb_autorouting_error = z108.object({
+  type: z108.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z107.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z107.string(),
-  subcircuit_id: z107.string().optional()
+  error_type: z108.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z108.string(),
+  subcircuit_id: z108.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z108 } from "zod";
-var pcb_manual_edit_conflict_warning = z108.object({
-  type: z108.literal("pcb_manual_edit_conflict_warning"),
+import { z as z109 } from "zod";
+var pcb_manual_edit_conflict_warning = z109.object({
+  type: z109.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z108.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z108.string(),
-  pcb_component_id: z108.string(),
-  pcb_group_id: z108.string().optional(),
-  subcircuit_id: z108.string().optional(),
-  source_component_id: z108.string()
+  warning_type: z109.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z109.string(),
+  pcb_component_id: z109.string(),
+  pcb_group_id: z109.string().optional(),
+  subcircuit_id: z109.string().optional(),
+  source_component_id: z109.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z109 } from "zod";
-var pcb_breakout_point = z109.object({
-  type: z109.literal("pcb_breakout_point"),
+import { z as z110 } from "zod";
+var pcb_breakout_point = z110.object({
+  type: z110.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z109.string(),
-  subcircuit_id: z109.string().optional(),
-  source_trace_id: z109.string().optional(),
-  source_port_id: z109.string().optional(),
-  source_net_id: z109.string().optional(),
+  pcb_group_id: z110.string(),
+  subcircuit_id: z110.string().optional(),
+  source_trace_id: z110.string().optional(),
+  source_port_id: z110.string().optional(),
+  source_net_id: z110.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -2343,60 +2367,60 @@ var pcb_breakout_point = z109.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z110 } from "zod";
-var pcb_ground_plane = z110.object({
-  type: z110.literal("pcb_ground_plane"),
+import { z as z111 } from "zod";
+var pcb_ground_plane = z111.object({
+  type: z111.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z110.string(),
-  source_net_id: z110.string(),
-  pcb_group_id: z110.string().optional(),
-  subcircuit_id: z110.string().optional()
+  source_pcb_ground_plane_id: z111.string(),
+  source_net_id: z111.string(),
+  pcb_group_id: z111.string().optional(),
+  subcircuit_id: z111.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z111 } from "zod";
-var pcb_ground_plane_region = z111.object({
-  type: z111.literal("pcb_ground_plane_region"),
+import { z as z112 } from "zod";
+var pcb_ground_plane_region = z112.object({
+  type: z112.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z111.string(),
-  pcb_group_id: z111.string().optional(),
-  subcircuit_id: z111.string().optional(),
+  pcb_ground_plane_id: z112.string(),
+  pcb_group_id: z112.string().optional(),
+  subcircuit_id: z112.string().optional(),
   layer: layer_ref,
-  points: z111.array(point)
+  points: z112.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z112 } from "zod";
-var pcb_thermal_spoke = z112.object({
-  type: z112.literal("pcb_thermal_spoke"),
+import { z as z113 } from "zod";
+var pcb_thermal_spoke = z113.object({
+  type: z113.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z112.string(),
-  shape: z112.string(),
-  spoke_count: z112.number(),
+  pcb_ground_plane_id: z113.string(),
+  shape: z113.string(),
+  spoke_count: z113.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z112.string().optional(),
-  subcircuit_id: z112.string().optional()
+  pcb_plated_hole_id: z113.string().optional(),
+  subcircuit_id: z113.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z113 } from "zod";
-var pcb_copper_pour_base = z113.object({
-  type: z113.literal("pcb_copper_pour"),
+import { z as z114 } from "zod";
+var pcb_copper_pour_base = z114.object({
+  type: z114.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z113.string().optional(),
-  subcircuit_id: z113.string().optional(),
+  pcb_group_id: z114.string().optional(),
+  subcircuit_id: z114.string().optional(),
   layer: layer_ref,
-  source_net_id: z113.string().optional()
+  source_net_id: z114.string().optional()
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z113.literal("rect"),
+  shape: z114.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2404,16 +2428,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z113.literal("brep"),
+  shape: z114.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z113.literal("polygon"),
-  points: z113.array(point)
+  shape: z114.literal("polygon"),
+  points: z114.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z113.discriminatedUnion("shape", [
+var pcb_copper_pour = z114.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -2421,147 +2445,147 @@ var pcb_copper_pour = z113.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z114 } from "zod";
-var pcb_component_outside_board_error = z114.object({
-  type: z114.literal("pcb_component_outside_board_error"),
+import { z as z115 } from "zod";
+var pcb_component_outside_board_error = z115.object({
+  type: z115.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z114.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z114.string(),
-  pcb_component_id: z114.string(),
-  pcb_board_id: z114.string(),
+  error_type: z115.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z115.string(),
+  pcb_component_id: z115.string(),
+  pcb_board_id: z115.string(),
   component_center: point,
-  component_bounds: z114.object({
-    min_x: z114.number(),
-    max_x: z114.number(),
-    min_y: z114.number(),
-    max_y: z114.number()
+  component_bounds: z115.object({
+    min_x: z115.number(),
+    max_x: z115.number(),
+    min_y: z115.number(),
+    max_y: z115.number()
   }),
-  subcircuit_id: z114.string().optional(),
-  source_component_id: z114.string().optional()
+  subcircuit_id: z115.string().optional(),
+  source_component_id: z115.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_invalid_layer_error.ts
-import { z as z115 } from "zod";
-var pcb_component_invalid_layer_error = z115.object({
-  type: z115.literal("pcb_component_invalid_layer_error"),
+import { z as z116 } from "zod";
+var pcb_component_invalid_layer_error = z116.object({
+  type: z116.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z115.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  message: z115.string(),
-  pcb_component_id: z115.string().optional(),
-  source_component_id: z115.string(),
+  error_type: z116.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  message: z116.string(),
+  pcb_component_id: z116.string().optional(),
+  source_component_id: z116.string(),
   layer: layer_ref,
-  subcircuit_id: z115.string().optional()
+  subcircuit_id: z116.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z116 } from "zod";
-var pcb_via_clearance_error = z116.object({
-  type: z116.literal("pcb_via_clearance_error"),
+import { z as z117 } from "zod";
+var pcb_via_clearance_error = z117.object({
+  type: z117.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z116.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z116.string(),
-  pcb_via_ids: z116.array(z116.string()).min(2),
+  error_type: z117.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z117.string(),
+  pcb_via_ids: z117.array(z117.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z116.object({
-    x: z116.number().optional(),
-    y: z116.number().optional()
+  pcb_center: z117.object({
+    x: z117.number().optional(),
+    y: z117.number().optional()
   }).optional(),
-  subcircuit_id: z116.string().optional()
+  subcircuit_id: z117.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z117 } from "zod";
-var pcb_courtyard_rect = z117.object({
-  type: z117.literal("pcb_courtyard_rect"),
+import { z as z118 } from "zod";
+var pcb_courtyard_rect = z118.object({
+  type: z118.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z117.string(),
-  pcb_group_id: z117.string().optional(),
-  subcircuit_id: z117.string().optional(),
+  pcb_component_id: z118.string(),
+  pcb_group_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
-  color: z117.string().optional()
+  color: z118.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z118 } from "zod";
-var pcb_courtyard_outline = z118.object({
-  type: z118.literal("pcb_courtyard_outline"),
+import { z as z119 } from "zod";
+var pcb_courtyard_outline = z119.object({
+  type: z119.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z118.string(),
-  pcb_group_id: z118.string().optional(),
-  subcircuit_id: z118.string().optional(),
+  pcb_component_id: z119.string(),
+  pcb_group_id: z119.string().optional(),
+  subcircuit_id: z119.string().optional(),
   layer: visible_layer,
-  outline: z118.array(point).min(2),
+  outline: z119.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z118.boolean().optional(),
-  is_stroke_dashed: z118.boolean().optional(),
-  color: z118.string().optional()
+  is_closed: z119.boolean().optional(),
+  is_stroke_dashed: z119.boolean().optional(),
+  color: z119.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_polygon.ts
-import { z as z119 } from "zod";
-var pcb_courtyard_polygon = z119.object({
-  type: z119.literal("pcb_courtyard_polygon"),
+import { z as z120 } from "zod";
+var pcb_courtyard_polygon = z120.object({
+  type: z120.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z119.string(),
-  pcb_group_id: z119.string().optional(),
-  subcircuit_id: z119.string().optional(),
+  pcb_component_id: z120.string(),
+  pcb_group_id: z120.string().optional(),
+  subcircuit_id: z120.string().optional(),
   layer: visible_layer,
-  points: z119.array(point).min(3),
-  color: z119.string().optional()
+  points: z120.array(point).min(3),
+  color: z120.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z120 } from "zod";
-var cad_component = z120.object({
-  type: z120.literal("cad_component"),
-  cad_component_id: z120.string(),
-  pcb_component_id: z120.string(),
-  source_component_id: z120.string(),
+import { z as z121 } from "zod";
+var cad_component = z121.object({
+  type: z121.literal("cad_component"),
+  cad_component_id: z121.string(),
+  pcb_component_id: z121.string(),
+  source_component_id: z121.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z120.string().optional(),
+  subcircuit_id: z121.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z120.string().optional(),
-  model_obj_url: z120.string().optional(),
-  model_stl_url: z120.string().optional(),
-  model_3mf_url: z120.string().optional(),
-  model_gltf_url: z120.string().optional(),
-  model_glb_url: z120.string().optional(),
-  model_step_url: z120.string().optional(),
-  model_wrl_url: z120.string().optional(),
-  model_unit_to_mm_scale_factor: z120.number().optional(),
-  model_jscad: z120.any().optional()
+  footprinter_string: z121.string().optional(),
+  model_obj_url: z121.string().optional(),
+  model_stl_url: z121.string().optional(),
+  model_3mf_url: z121.string().optional(),
+  model_gltf_url: z121.string().optional(),
+  model_glb_url: z121.string().optional(),
+  model_step_url: z121.string().optional(),
+  model_wrl_url: z121.string().optional(),
+  model_unit_to_mm_scale_factor: z121.number().optional(),
+  model_jscad: z121.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z121 } from "zod";
-var wave_shape = z121.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z121.union([z121.string(), z121.number()]).transform((val) => {
+import { z as z122 } from "zod";
+var wave_shape = z122.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z122.union([z122.string(), z122.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -2570,30 +2594,30 @@ var percentage = z121.union([z121.string(), z121.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z121.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z122.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z121.object({
-  type: z121.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z122.object({
+  type: z122.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z121.literal(true).optional().default(true),
-  positive_source_port_id: z121.string().optional(),
-  negative_source_port_id: z121.string().optional(),
-  positive_source_net_id: z121.string().optional(),
-  negative_source_net_id: z121.string().optional(),
+  is_dc_source: z122.literal(true).optional().default(true),
+  positive_source_port_id: z122.string().optional(),
+  negative_source_port_id: z122.string().optional(),
+  positive_source_net_id: z122.string().optional(),
+  negative_source_net_id: z122.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z121.object({
-  type: z121.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z122.object({
+  type: z122.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z121.literal(false),
-  terminal1_source_port_id: z121.string().optional(),
-  terminal2_source_port_id: z121.string().optional(),
-  terminal1_source_net_id: z121.string().optional(),
-  terminal2_source_net_id: z121.string().optional(),
+  is_dc_source: z122.literal(false),
+  terminal1_source_port_id: z122.string().optional(),
+  terminal2_source_port_id: z122.string().optional(),
+  terminal1_source_net_id: z122.string().optional(),
+  terminal2_source_net_id: z122.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -2601,25 +2625,25 @@ var simulation_ac_voltage_source = z121.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z121.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z122.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z122 } from "zod";
-var experiment_type = z122.union([
-  z122.literal("spice_dc_sweep"),
-  z122.literal("spice_dc_operating_point"),
-  z122.literal("spice_transient_analysis"),
-  z122.literal("spice_ac_analysis")
+import { z as z123 } from "zod";
+var experiment_type = z123.union([
+  z123.literal("spice_dc_sweep"),
+  z123.literal("spice_dc_operating_point"),
+  z123.literal("spice_transient_analysis"),
+  z123.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z122.object({
-  type: z122.literal("simulation_experiment"),
+var simulation_experiment = z123.object({
+  type: z123.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z122.string(),
+  name: z123.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
@@ -2628,49 +2652,49 @@ var simulation_experiment = z122.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z123 } from "zod";
-var simulation_transient_voltage_graph = z123.object({
-  type: z123.literal("simulation_transient_voltage_graph"),
+import { z as z124 } from "zod";
+var simulation_transient_voltage_graph = z124.object({
+  type: z124.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z123.string(),
-  timestamps_ms: z123.array(z123.number()).optional(),
-  voltage_levels: z123.array(z123.number()),
-  schematic_voltage_probe_id: z123.string().optional(),
-  simulation_voltage_probe_id: z123.string().optional(),
-  subcircuit_connectivity_map_key: z123.string().optional(),
+  simulation_experiment_id: z124.string(),
+  timestamps_ms: z124.array(z124.number()).optional(),
+  voltage_levels: z124.array(z124.number()),
+  schematic_voltage_probe_id: z124.string().optional(),
+  simulation_voltage_probe_id: z124.string().optional(),
+  subcircuit_connectivity_map_key: z124.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z123.string().optional()
+  name: z124.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z124 } from "zod";
-var simulation_switch = z124.object({
-  type: z124.literal("simulation_switch"),
+import { z as z125 } from "zod";
+var simulation_switch = z125.object({
+  type: z125.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z124.string().optional(),
+  source_component_id: z125.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z124.boolean().optional(),
+  starts_closed: z125.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z125 } from "zod";
-var simulation_voltage_probe = z125.object({
-  type: z125.literal("simulation_voltage_probe"),
+import { z as z126 } from "zod";
+var simulation_voltage_probe = z126.object({
+  type: z126.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_port_id: z125.string().optional(),
-  source_net_id: z125.string().optional(),
-  name: z125.string().optional(),
-  subcircuit_id: z125.string().optional()
+  source_port_id: z126.string().optional(),
+  source_net_id: z126.string().optional(),
+  name: z126.string().optional(),
+  subcircuit_id: z126.string().optional()
 }).describe(
   "Defines a voltage probe for simulation, connected to a port or a net"
 ).refine(
@@ -2682,8 +2706,8 @@ var simulation_voltage_probe = z125.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z126 } from "zod";
-var any_circuit_element = z126.union([
+import { z as z127 } from "zod";
+var any_circuit_element = z127.union([
   source_trace,
   source_port,
   any_source_component,
@@ -2712,6 +2736,7 @@ var any_circuit_element = z126.union([
   source_project_metadata,
   source_trace_not_connected_error,
   source_pin_missing_trace_warning,
+  unknown_error_finding_part,
   pcb_component,
   pcb_hole,
   pcb_missing_footprint_error,
@@ -2964,6 +2989,7 @@ export {
   supplier_name,
   time,
   timestamp,
+  unknown_error_finding_part,
   visible_layer,
   voltage,
   wave_shape