circuit-json 0.0.277 → 0.0.279

package/dist/index.mjs

@@ -2016,150 +2016,172 @@ var pcb_fabrication_note_rect = z92.object({
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
 
-// src/pcb/pcb_note_text.ts
+// src/pcb/pcb_fabrication_note_dimension.ts
 import { z as z93 } from "zod";
-var pcb_note_text = z93.object({
-  type: z93.literal("pcb_note_text"),
-  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z93.string().optional(),
+var pcb_fabrication_note_dimension = z93.object({
+  type: z93.literal("pcb_fabrication_note_dimension"),
+  pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
+    "pcb_fabrication_note_dimension"
+  ),
+  pcb_component_id: z93.string(),
   pcb_group_id: z93.string().optional(),
   subcircuit_id: z93.string().optional(),
+  layer: visible_layer,
+  from: point,
+  to: point,
+  text: z93.string().optional(),
+  offset: length.optional(),
   font: z93.literal("tscircuit2024").default("tscircuit2024"),
+  font_size: length.default("1mm"),
+  color: z93.string().optional(),
+  arrow_size: length.default("1mm")
+}).describe("Defines a measurement annotation within PCB fabrication notes");
+expectTypesMatch(true);
+
+// src/pcb/pcb_note_text.ts
+import { z as z94 } from "zod";
+var pcb_note_text = z94.object({
+  type: z94.literal("pcb_note_text"),
+  pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
+  pcb_component_id: z94.string().optional(),
+  pcb_group_id: z94.string().optional(),
+  subcircuit_id: z94.string().optional(),
+  font: z94.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  text: z93.string(),
+  text: z94.string(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z93.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z93.string().optional()
+  anchor_alignment: z94.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z94.string().optional()
 }).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_rect.ts
-import { z as z94 } from "zod";
-var pcb_note_rect = z94.object({
-  type: z94.literal("pcb_note_rect"),
+import { z as z95 } from "zod";
+var pcb_note_rect = z95.object({
+  type: z95.literal("pcb_note_rect"),
   pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
-  pcb_component_id: z94.string().optional(),
-  pcb_group_id: z94.string().optional(),
-  subcircuit_id: z94.string().optional(),
+  pcb_component_id: z95.string().optional(),
+  pcb_group_id: z95.string().optional(),
+  subcircuit_id: z95.string().optional(),
   center: point,
   width: length,
   height: length,
   stroke_width: length.default("0.1mm"),
-  is_filled: z94.boolean().optional(),
-  has_stroke: z94.boolean().optional(),
-  is_stroke_dashed: z94.boolean().optional(),
-  color: z94.string().optional()
+  is_filled: z95.boolean().optional(),
+  has_stroke: z95.boolean().optional(),
+  is_stroke_dashed: z95.boolean().optional(),
+  color: z95.string().optional()
 }).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_path.ts
-import { z as z95 } from "zod";
-var pcb_note_path = z95.object({
-  type: z95.literal("pcb_note_path"),
+import { z as z96 } from "zod";
+var pcb_note_path = z96.object({
+  type: z96.literal("pcb_note_path"),
   pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
-  pcb_component_id: z95.string().optional(),
-  pcb_group_id: z95.string().optional(),
-  subcircuit_id: z95.string().optional(),
-  route: z95.array(point),
+  pcb_component_id: z96.string().optional(),
+  pcb_group_id: z96.string().optional(),
+  subcircuit_id: z96.string().optional(),
+  route: z96.array(point),
   stroke_width: length.default("0.1mm"),
-  color: z95.string().optional()
+  color: z96.string().optional()
 }).describe("Defines a polyline documentation note on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_line.ts
-import { z as z96 } from "zod";
-var pcb_note_line = z96.object({
-  type: z96.literal("pcb_note_line"),
+import { z as z97 } from "zod";
+var pcb_note_line = z97.object({
+  type: z97.literal("pcb_note_line"),
   pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
-  pcb_component_id: z96.string().optional(),
-  pcb_group_id: z96.string().optional(),
-  subcircuit_id: z96.string().optional(),
+  pcb_component_id: z97.string().optional(),
+  pcb_group_id: z97.string().optional(),
+  subcircuit_id: z97.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z96.string().optional(),
-  is_dashed: z96.boolean().optional()
+  color: z97.string().optional(),
+  is_dashed: z97.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_note_dimension.ts
-import { z as z97 } from "zod";
-var pcb_note_dimension = z97.object({
-  type: z97.literal("pcb_note_dimension"),
+import { z as z98 } from "zod";
+var pcb_note_dimension = z98.object({
+  type: z98.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z97.string().optional(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
+  pcb_component_id: z98.string().optional(),
+  pcb_group_id: z98.string().optional(),
+  subcircuit_id: z98.string().optional(),
   from: point,
   to: point,
-  text: z97.string().optional(),
-  font: z97.literal("tscircuit2024").default("tscircuit2024"),
+  text: z98.string().optional(),
+  font: z98.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z97.string().optional(),
+  color: z98.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z98 } from "zod";
-var pcb_footprint_overlap_error = z98.object({
-  type: z98.literal("pcb_footprint_overlap_error"),
+import { z as z99 } from "zod";
+var pcb_footprint_overlap_error = z99.object({
+  type: z99.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z98.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z98.string(),
-  pcb_smtpad_ids: z98.array(z98.string()).optional(),
-  pcb_plated_hole_ids: z98.array(z98.string()).optional(),
-  pcb_hole_ids: z98.array(z98.string()).optional(),
-  pcb_keepout_ids: z98.array(z98.string()).optional()
+  error_type: z99.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z99.string(),
+  pcb_smtpad_ids: z99.array(z99.string()).optional(),
+  pcb_plated_hole_ids: z99.array(z99.string()).optional(),
+  pcb_hole_ids: z99.array(z99.string()).optional(),
+  pcb_keepout_ids: z99.array(z99.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z99 } from "zod";
-var pcb_keepout = z99.object({
-  type: z99.literal("pcb_keepout"),
-  shape: z99.literal("rect"),
-  pcb_group_id: z99.string().optional(),
-  subcircuit_id: z99.string().optional(),
+import { z as z100 } from "zod";
+var pcb_keepout = z100.object({
+  type: z100.literal("pcb_keepout"),
+  shape: z100.literal("rect"),
+  pcb_group_id: z100.string().optional(),
+  subcircuit_id: z100.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z99.string(),
-  layers: z99.array(z99.string()),
+  pcb_keepout_id: z100.string(),
+  layers: z100.array(z100.string()),
   // Specify layers where the keepout applies
-  description: z99.string().optional()
+  description: z100.string().optional()
   // Optional description of the keepout
 }).or(
-  z99.object({
-    type: z99.literal("pcb_keepout"),
-    shape: z99.literal("circle"),
-    pcb_group_id: z99.string().optional(),
-    subcircuit_id: z99.string().optional(),
+  z100.object({
+    type: z100.literal("pcb_keepout"),
+    shape: z100.literal("circle"),
+    pcb_group_id: z100.string().optional(),
+    subcircuit_id: z100.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z99.string(),
-    layers: z99.array(z99.string()),
+    pcb_keepout_id: z100.string(),
+    layers: z100.array(z100.string()),
     // Specify layers where the keepout applies
-    description: z99.string().optional()
+    description: z100.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z100 } from "zod";
-var pcb_cutout_base = z100.object({
-  type: z100.literal("pcb_cutout"),
+import { z as z101 } from "zod";
+var pcb_cutout_base = z101.object({
+  type: z101.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z100.string().optional(),
-  subcircuit_id: z100.string().optional()
+  pcb_group_id: z101.string().optional(),
+  subcircuit_id: z101.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z100.literal("rect"),
+  shape: z101.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2167,17 +2189,17 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z100.literal("circle"),
+  shape: z101.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z100.literal("polygon"),
-  points: z100.array(point)
+  shape: z101.literal("polygon"),
+  points: z101.array(point)
 });
 expectTypesMatch(true);
-var pcb_cutout = z100.discriminatedUnion("shape", [
+var pcb_cutout = z101.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon
@@ -2185,117 +2207,117 @@ var pcb_cutout = z100.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z101 } from "zod";
-var pcb_missing_footprint_error = z101.object({
-  type: z101.literal("pcb_missing_footprint_error"),
+import { z as z102 } from "zod";
+var pcb_missing_footprint_error = z102.object({
+  type: z102.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  error_type: z101.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z101.string(),
-  message: z101.string()
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  error_type: z102.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z102.string(),
+  message: z102.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/external_footprint_load_error.ts
-import { z as z102 } from "zod";
-var external_footprint_load_error = z102.object({
-  type: z102.literal("external_footprint_load_error"),
+import { z as z103 } from "zod";
+var external_footprint_load_error = z103.object({
+  type: z103.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z102.string(),
-  source_component_id: z102.string(),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  footprinter_string: z102.string().optional(),
-  error_type: z102.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z102.string()
+  pcb_component_id: z103.string(),
+  source_component_id: z103.string(),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  footprinter_string: z103.string().optional(),
+  error_type: z103.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z103.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/circuit_json_footprint_load_error.ts
-import { z as z103 } from "zod";
-var circuit_json_footprint_load_error = z103.object({
-  type: z103.literal("circuit_json_footprint_load_error"),
+import { z as z104 } from "zod";
+var circuit_json_footprint_load_error = z104.object({
+  type: z104.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z103.string(),
-  source_component_id: z103.string(),
-  pcb_group_id: z103.string().optional(),
-  subcircuit_id: z103.string().optional(),
-  error_type: z103.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z103.string(),
-  circuit_json: z103.array(z103.any()).optional()
+  pcb_component_id: z104.string(),
+  source_component_id: z104.string(),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
+  error_type: z104.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z104.string(),
+  circuit_json: z104.array(z104.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z104 } from "zod";
-var pcb_group = z104.object({
-  type: z104.literal("pcb_group"),
+import { z as z105 } from "zod";
+var pcb_group = z105.object({
+  type: z105.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z104.string(),
-  is_subcircuit: z104.boolean().optional(),
-  subcircuit_id: z104.string().optional(),
+  source_group_id: z105.string(),
+  is_subcircuit: z105.boolean().optional(),
+  subcircuit_id: z105.string().optional(),
   width: length,
   height: length,
   center: point,
-  pcb_component_ids: z104.array(z104.string()),
-  name: z104.string().optional(),
-  description: z104.string().optional(),
-  layout_mode: z104.string().optional(),
-  autorouter_configuration: z104.object({
+  pcb_component_ids: z105.array(z105.string()),
+  name: z105.string().optional(),
+  description: z105.string().optional(),
+  layout_mode: z105.string().optional(),
+  autorouter_configuration: z105.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z104.string().optional()
+  autorouter_used_string: z105.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z105 } from "zod";
-var pcb_autorouting_error = z105.object({
-  type: z105.literal("pcb_autorouting_error"),
+import { z as z106 } from "zod";
+var pcb_autorouting_error = z106.object({
+  type: z106.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z105.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z105.string(),
-  subcircuit_id: z105.string().optional()
+  error_type: z106.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z106.string(),
+  subcircuit_id: z106.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z106 } from "zod";
-var pcb_manual_edit_conflict_warning = z106.object({
-  type: z106.literal("pcb_manual_edit_conflict_warning"),
+import { z as z107 } from "zod";
+var pcb_manual_edit_conflict_warning = z107.object({
+  type: z107.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z106.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z106.string(),
-  pcb_component_id: z106.string(),
-  pcb_group_id: z106.string().optional(),
-  subcircuit_id: z106.string().optional(),
-  source_component_id: z106.string()
+  warning_type: z107.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z107.string(),
+  pcb_component_id: z107.string(),
+  pcb_group_id: z107.string().optional(),
+  subcircuit_id: z107.string().optional(),
+  source_component_id: z107.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z107 } from "zod";
-var pcb_breakout_point = z107.object({
-  type: z107.literal("pcb_breakout_point"),
+import { z as z108 } from "zod";
+var pcb_breakout_point = z108.object({
+  type: z108.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z107.string(),
-  subcircuit_id: z107.string().optional(),
-  source_trace_id: z107.string().optional(),
-  source_port_id: z107.string().optional(),
-  source_net_id: z107.string().optional(),
+  pcb_group_id: z108.string(),
+  subcircuit_id: z108.string().optional(),
+  source_trace_id: z108.string().optional(),
+  source_port_id: z108.string().optional(),
+  source_net_id: z108.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -2304,60 +2326,60 @@ var pcb_breakout_point = z107.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z108 } from "zod";
-var pcb_ground_plane = z108.object({
-  type: z108.literal("pcb_ground_plane"),
+import { z as z109 } from "zod";
+var pcb_ground_plane = z109.object({
+  type: z109.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z108.string(),
-  source_net_id: z108.string(),
-  pcb_group_id: z108.string().optional(),
-  subcircuit_id: z108.string().optional()
+  source_pcb_ground_plane_id: z109.string(),
+  source_net_id: z109.string(),
+  pcb_group_id: z109.string().optional(),
+  subcircuit_id: z109.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z109 } from "zod";
-var pcb_ground_plane_region = z109.object({
-  type: z109.literal("pcb_ground_plane_region"),
+import { z as z110 } from "zod";
+var pcb_ground_plane_region = z110.object({
+  type: z110.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z109.string(),
-  pcb_group_id: z109.string().optional(),
-  subcircuit_id: z109.string().optional(),
+  pcb_ground_plane_id: z110.string(),
+  pcb_group_id: z110.string().optional(),
+  subcircuit_id: z110.string().optional(),
   layer: layer_ref,
-  points: z109.array(point)
+  points: z110.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z110 } from "zod";
-var pcb_thermal_spoke = z110.object({
-  type: z110.literal("pcb_thermal_spoke"),
+import { z as z111 } from "zod";
+var pcb_thermal_spoke = z111.object({
+  type: z111.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z110.string(),
-  shape: z110.string(),
-  spoke_count: z110.number(),
+  pcb_ground_plane_id: z111.string(),
+  shape: z111.string(),
+  spoke_count: z111.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z110.string().optional(),
-  subcircuit_id: z110.string().optional()
+  pcb_plated_hole_id: z111.string().optional(),
+  subcircuit_id: z111.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/pcb/pcb_copper_pour.ts
-import { z as z111 } from "zod";
-var pcb_copper_pour_base = z111.object({
-  type: z111.literal("pcb_copper_pour"),
+import { z as z112 } from "zod";
+var pcb_copper_pour_base = z112.object({
+  type: z112.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z111.string().optional(),
-  subcircuit_id: z111.string().optional(),
+  pcb_group_id: z112.string().optional(),
+  subcircuit_id: z112.string().optional(),
   layer: layer_ref,
-  source_net_id: z111.string().optional()
+  source_net_id: z112.string().optional()
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z111.literal("rect"),
+  shape: z112.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -2365,16 +2387,16 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z111.literal("brep"),
+  shape: z112.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z111.literal("polygon"),
-  points: z111.array(point)
+  shape: z112.literal("polygon"),
+  points: z112.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z111.discriminatedUnion("shape", [
+var pcb_copper_pour = z112.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
@@ -2382,117 +2404,117 @@ var pcb_copper_pour = z111.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_component_outside_board_error.ts
-import { z as z112 } from "zod";
-var pcb_component_outside_board_error = z112.object({
-  type: z112.literal("pcb_component_outside_board_error"),
+import { z as z113 } from "zod";
+var pcb_component_outside_board_error = z113.object({
+  type: z113.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z112.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z112.string(),
-  pcb_component_id: z112.string(),
-  pcb_board_id: z112.string(),
+  error_type: z113.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z113.string(),
+  pcb_component_id: z113.string(),
+  pcb_board_id: z113.string(),
   component_center: point,
-  component_bounds: z112.object({
-    min_x: z112.number(),
-    max_x: z112.number(),
-    min_y: z112.number(),
-    max_y: z112.number()
+  component_bounds: z113.object({
+    min_x: z113.number(),
+    max_x: z113.number(),
+    min_y: z113.number(),
+    max_y: z113.number()
   }),
-  subcircuit_id: z112.string().optional(),
-  source_component_id: z112.string().optional()
+  subcircuit_id: z113.string().optional(),
+  source_component_id: z113.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_via_clearance_error.ts
-import { z as z113 } from "zod";
-var pcb_via_clearance_error = z113.object({
-  type: z113.literal("pcb_via_clearance_error"),
+import { z as z114 } from "zod";
+var pcb_via_clearance_error = z114.object({
+  type: z114.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z113.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z113.string(),
-  pcb_via_ids: z113.array(z113.string()).min(2),
+  error_type: z114.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z114.string(),
+  pcb_via_ids: z114.array(z114.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z113.object({
-    x: z113.number().optional(),
-    y: z113.number().optional()
+  pcb_center: z114.object({
+    x: z114.number().optional(),
+    y: z114.number().optional()
   }).optional(),
-  subcircuit_id: z113.string().optional()
+  subcircuit_id: z114.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_rect.ts
-import { z as z114 } from "zod";
-var pcb_courtyard_rect = z114.object({
-  type: z114.literal("pcb_courtyard_rect"),
+import { z as z115 } from "zod";
+var pcb_courtyard_rect = z115.object({
+  type: z115.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z114.string(),
-  pcb_group_id: z114.string().optional(),
-  subcircuit_id: z114.string().optional(),
+  pcb_component_id: z115.string(),
+  pcb_group_id: z115.string().optional(),
+  subcircuit_id: z115.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
-  is_filled: z114.boolean().optional(),
-  has_stroke: z114.boolean().optional(),
-  is_stroke_dashed: z114.boolean().optional(),
-  color: z114.string().optional()
+  is_filled: z115.boolean().optional(),
+  has_stroke: z115.boolean().optional(),
+  is_stroke_dashed: z115.boolean().optional(),
+  color: z115.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_courtyard_outline.ts
-import { z as z115 } from "zod";
-var pcb_courtyard_outline = z115.object({
-  type: z115.literal("pcb_courtyard_outline"),
+import { z as z116 } from "zod";
+var pcb_courtyard_outline = z116.object({
+  type: z116.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z115.string(),
-  pcb_group_id: z115.string().optional(),
-  subcircuit_id: z115.string().optional(),
+  pcb_component_id: z116.string(),
+  pcb_group_id: z116.string().optional(),
+  subcircuit_id: z116.string().optional(),
   layer: visible_layer,
-  outline: z115.array(point).min(2),
+  outline: z116.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z115.boolean().optional(),
-  is_stroke_dashed: z115.boolean().optional(),
-  color: z115.string().optional()
+  is_closed: z116.boolean().optional(),
+  is_stroke_dashed: z116.boolean().optional(),
+  color: z116.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z116 } from "zod";
-var cad_component = z116.object({
-  type: z116.literal("cad_component"),
-  cad_component_id: z116.string(),
-  pcb_component_id: z116.string(),
-  source_component_id: z116.string(),
+import { z as z117 } from "zod";
+var cad_component = z117.object({
+  type: z117.literal("cad_component"),
+  cad_component_id: z117.string(),
+  pcb_component_id: z117.string(),
+  source_component_id: z117.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z116.string().optional(),
+  subcircuit_id: z117.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z116.string().optional(),
-  model_obj_url: z116.string().optional(),
-  model_stl_url: z116.string().optional(),
-  model_3mf_url: z116.string().optional(),
-  model_gltf_url: z116.string().optional(),
-  model_glb_url: z116.string().optional(),
-  model_step_url: z116.string().optional(),
-  model_wrl_url: z116.string().optional(),
-  model_unit_to_mm_scale_factor: z116.number().optional(),
-  model_jscad: z116.any().optional()
+  footprinter_string: z117.string().optional(),
+  model_obj_url: z117.string().optional(),
+  model_stl_url: z117.string().optional(),
+  model_3mf_url: z117.string().optional(),
+  model_gltf_url: z117.string().optional(),
+  model_glb_url: z117.string().optional(),
+  model_step_url: z117.string().optional(),
+  model_wrl_url: z117.string().optional(),
+  model_unit_to_mm_scale_factor: z117.number().optional(),
+  model_jscad: z117.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z117 } from "zod";
-var wave_shape = z117.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z117.union([z117.string(), z117.number()]).transform((val) => {
+import { z as z118 } from "zod";
+var wave_shape = z118.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z118.union([z118.string(), z118.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -2501,30 +2523,30 @@ var percentage = z117.union([z117.string(), z117.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z117.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z118.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z117.object({
-  type: z117.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z118.object({
+  type: z118.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z117.literal(true).optional().default(true),
-  positive_source_port_id: z117.string().optional(),
-  negative_source_port_id: z117.string().optional(),
-  positive_source_net_id: z117.string().optional(),
-  negative_source_net_id: z117.string().optional(),
+  is_dc_source: z118.literal(true).optional().default(true),
+  positive_source_port_id: z118.string().optional(),
+  negative_source_port_id: z118.string().optional(),
+  positive_source_net_id: z118.string().optional(),
+  negative_source_net_id: z118.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z117.object({
-  type: z117.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z118.object({
+  type: z118.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z117.literal(false),
-  terminal1_source_port_id: z117.string().optional(),
-  terminal2_source_port_id: z117.string().optional(),
-  terminal1_source_net_id: z117.string().optional(),
-  terminal2_source_net_id: z117.string().optional(),
+  is_dc_source: z118.literal(false),
+  terminal1_source_port_id: z118.string().optional(),
+  terminal2_source_port_id: z118.string().optional(),
+  terminal1_source_net_id: z118.string().optional(),
+  terminal2_source_net_id: z118.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -2532,25 +2554,25 @@ var simulation_ac_voltage_source = z117.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z117.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z118.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/simulation/simulation_experiment.ts
-import { z as z118 } from "zod";
-var experiment_type = z118.union([
-  z118.literal("spice_dc_sweep"),
-  z118.literal("spice_dc_operating_point"),
-  z118.literal("spice_transient_analysis"),
-  z118.literal("spice_ac_analysis")
+import { z as z119 } from "zod";
+var experiment_type = z119.union([
+  z119.literal("spice_dc_sweep"),
+  z119.literal("spice_dc_operating_point"),
+  z119.literal("spice_transient_analysis"),
+  z119.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z118.object({
-  type: z118.literal("simulation_experiment"),
+var simulation_experiment = z119.object({
+  type: z119.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z118.string(),
+  name: z119.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
@@ -2559,47 +2581,47 @@ var simulation_experiment = z118.object({
 expectTypesMatch(true);
 
 // src/simulation/simulation_transient_voltage_graph.ts
-import { z as z119 } from "zod";
-var simulation_transient_voltage_graph = z119.object({
-  type: z119.literal("simulation_transient_voltage_graph"),
+import { z as z120 } from "zod";
+var simulation_transient_voltage_graph = z120.object({
+  type: z120.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z119.string(),
-  timestamps_ms: z119.array(z119.number()).optional(),
-  voltage_levels: z119.array(z119.number()),
-  schematic_voltage_probe_id: z119.string().optional(),
-  subcircuit_connectivity_map_key: z119.string().optional(),
+  simulation_experiment_id: z120.string(),
+  timestamps_ms: z120.array(z120.number()).optional(),
+  voltage_levels: z120.array(z120.number()),
+  schematic_voltage_probe_id: z120.string().optional(),
+  subcircuit_connectivity_map_key: z120.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z119.string().optional()
+  name: z120.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
 
 // src/simulation/simulation_switch.ts
-import { z as z120 } from "zod";
-var simulation_switch = z120.object({
-  type: z120.literal("simulation_switch"),
+import { z as z121 } from "zod";
+var simulation_switch = z121.object({
+  type: z121.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z120.boolean().optional(),
+  starts_closed: z121.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_probe.ts
-import { z as z121 } from "zod";
-var simulation_voltage_probe = z121.object({
-  type: z121.literal("simulation_voltage_probe"),
+import { z as z122 } from "zod";
+var simulation_voltage_probe = z122.object({
+  type: z122.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_port_id: z121.string().optional(),
-  source_net_id: z121.string().optional(),
-  name: z121.string().optional(),
-  subcircuit_id: z121.string().optional()
+  source_port_id: z122.string().optional(),
+  source_net_id: z122.string().optional(),
+  name: z122.string().optional(),
+  subcircuit_id: z122.string().optional()
 }).describe(
   "Defines a voltage probe for simulation, connected to a port or a net"
 ).refine(
@@ -2611,8 +2633,8 @@ var simulation_voltage_probe = z121.object({
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z122 } from "zod";
-var any_circuit_element = z122.union([
+import { z as z123 } from "zod";
+var any_circuit_element = z123.union([
   source_trace,
   source_port,
   any_source_component,
@@ -2674,6 +2696,7 @@ var any_circuit_element = z122.union([
   pcb_fabrication_note_path,
   pcb_fabrication_note_text,
   pcb_fabrication_note_rect,
+  pcb_fabrication_note_dimension,
   pcb_note_text,
   pcb_note_rect,
   pcb_note_path,
@@ -2757,6 +2780,7 @@ export {
   pcb_cutout_circle,
   pcb_cutout_polygon,
   pcb_cutout_rect,
+  pcb_fabrication_note_dimension,
   pcb_fabrication_note_path,
   pcb_fabrication_note_rect,
   pcb_fabrication_note_text,