circuit-json 0.0.232 → 0.0.233

package/dist/index.mjs

@@ -396,7 +396,7 @@ var source_simple_power_source = source_component_base.extend({
 expectTypesMatch(true);
 
 // src/source/any_source_component.ts
-import { z as z32 } from "zod";
+import { z as z33 } from "zod";
 
 // src/source/source_simple_fuse.ts
 import { z as z16 } from "zod";
@@ -572,8 +572,23 @@ var source_trace_not_connected_error = z31.object({
 }).describe("Occurs when a source trace selector does not match any ports");
 expectTypesMatch(true);
 
+// src/source/source_property_ignored_warning.ts
+import { z as z32 } from "zod";
+var source_property_ignored_warning = z32.object({
+  type: z32.literal("source_property_ignored_warning"),
+  source_property_ignored_warning_id: getZodPrefixedIdWithDefault(
+    "source_property_ignored_warning"
+  ),
+  source_component_id: z32.string(),
+  property_name: z32.string(),
+  subcircuit_id: z32.string().optional(),
+  error_type: z32.literal("source_property_ignored_warning").default("source_property_ignored_warning"),
+  message: z32.string()
+}).describe("The source property was ignored");
+expectTypesMatch(true);
+
 // src/source/any_source_component.ts
-var any_source_component = z32.union([
+var any_source_component = z33.union([
   source_simple_resistor,
   source_simple_capacitor,
   source_simple_diode,
@@ -596,218 +611,219 @@ var any_source_component = z32.union([
   source_project_metadata,
   source_missing_property_error,
   source_failed_to_create_component_error,
-  source_trace_not_connected_error
+  source_trace_not_connected_error,
+  source_property_ignored_warning
 ]);
 expectTypesMatch(true);
 
 // src/source/source_port.ts
-import { z as z33 } from "zod";
-var source_port = z33.object({
-  type: z33.literal("source_port"),
-  pin_number: z33.number().optional(),
-  port_hints: z33.array(z33.string()).optional(),
-  name: z33.string(),
-  source_port_id: z33.string(),
-  source_component_id: z33.string(),
-  subcircuit_id: z33.string().optional(),
-  subcircuit_connectivity_map_key: z33.string().optional()
-});
-expectTypesMatch(true);
-
-// src/source/source_trace.ts
 import { z as z34 } from "zod";
-var source_trace = z34.object({
-  type: z34.literal("source_trace"),
-  source_trace_id: z34.string(),
-  connected_source_port_ids: z34.array(z34.string()),
-  connected_source_net_ids: z34.array(z34.string()),
+var source_port = z34.object({
+  type: z34.literal("source_port"),
+  pin_number: z34.number().optional(),
+  port_hints: z34.array(z34.string()).optional(),
+  name: z34.string(),
+  source_port_id: z34.string(),
+  source_component_id: z34.string(),
   subcircuit_id: z34.string().optional(),
-  subcircuit_connectivity_map_key: z34.string().optional(),
-  max_length: z34.number().optional(),
-  min_trace_thickness: z34.number().optional(),
-  display_name: z34.string().optional()
+  subcircuit_connectivity_map_key: z34.string().optional()
 });
 expectTypesMatch(true);
 
-// src/source/source_group.ts
+// src/source/source_trace.ts
 import { z as z35 } from "zod";
-var source_group = z35.object({
-  type: z35.literal("source_group"),
-  source_group_id: z35.string(),
+var source_trace = z35.object({
+  type: z35.literal("source_trace"),
+  source_trace_id: z35.string(),
+  connected_source_port_ids: z35.array(z35.string()),
+  connected_source_net_ids: z35.array(z35.string()),
   subcircuit_id: z35.string().optional(),
-  parent_subcircuit_id: z35.string().optional(),
-  parent_source_group_id: z35.string().optional(),
-  is_subcircuit: z35.boolean().optional(),
-  name: z35.string().optional()
+  subcircuit_connectivity_map_key: z35.string().optional(),
+  max_length: z35.number().optional(),
+  min_trace_thickness: z35.number().optional(),
+  display_name: z35.string().optional()
 });
 expectTypesMatch(true);
 
-// src/source/source_net.ts
+// src/source/source_group.ts
 import { z as z36 } from "zod";
-var source_net = z36.object({
-  type: z36.literal("source_net"),
-  source_net_id: z36.string(),
-  name: z36.string(),
-  member_source_group_ids: z36.array(z36.string()),
-  is_power: z36.boolean().optional(),
-  is_ground: z36.boolean().optional(),
-  is_digital_signal: z36.boolean().optional(),
-  is_analog_signal: z36.boolean().optional(),
-  trace_width: z36.number().optional(),
+var source_group = z36.object({
+  type: z36.literal("source_group"),
+  source_group_id: z36.string(),
   subcircuit_id: z36.string().optional(),
-  subcircuit_connectivity_map_key: z36.string().optional()
+  parent_subcircuit_id: z36.string().optional(),
+  parent_source_group_id: z36.string().optional(),
+  is_subcircuit: z36.boolean().optional(),
+  name: z36.string().optional()
 });
 expectTypesMatch(true);
 
-// src/source/source_pcb_ground_plane.ts
+// src/source/source_net.ts
 import { z as z37 } from "zod";
-var source_pcb_ground_plane = z37.object({
-  type: z37.literal("source_pcb_ground_plane"),
-  source_pcb_ground_plane_id: z37.string(),
-  source_group_id: z37.string(),
+var source_net = z37.object({
+  type: z37.literal("source_net"),
   source_net_id: z37.string(),
-  subcircuit_id: z37.string().optional()
+  name: z37.string(),
+  member_source_group_ids: z37.array(z37.string()),
+  is_power: z37.boolean().optional(),
+  is_ground: z37.boolean().optional(),
+  is_digital_signal: z37.boolean().optional(),
+  is_analog_signal: z37.boolean().optional(),
+  trace_width: z37.number().optional(),
+  subcircuit_id: z37.string().optional(),
+  subcircuit_connectivity_map_key: z37.string().optional()
+});
+expectTypesMatch(true);
+
+// src/source/source_pcb_ground_plane.ts
+import { z as z38 } from "zod";
+var source_pcb_ground_plane = z38.object({
+  type: z38.literal("source_pcb_ground_plane"),
+  source_pcb_ground_plane_id: z38.string(),
+  source_group_id: z38.string(),
+  source_net_id: z38.string(),
+  subcircuit_id: z38.string().optional()
 }).describe("Defines a ground plane in the source domain");
 expectTypesMatch(true);
 
 // src/schematic/schematic_box.ts
-import { z as z38 } from "zod";
-var schematic_box = z38.object({
-  type: z38.literal("schematic_box"),
-  schematic_component_id: z38.string().optional(),
+import { z as z39 } from "zod";
+var schematic_box = z39.object({
+  type: z39.literal("schematic_box"),
+  schematic_component_id: z39.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z38.boolean().default(false),
+  is_dashed: z39.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z38.string().optional()
+  subcircuit_id: z39.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_path.ts
-import { z as z39 } from "zod";
-var schematic_path = z39.object({
-  type: z39.literal("schematic_path"),
-  schematic_component_id: z39.string(),
-  fill_color: z39.enum(["red", "blue"]).optional(),
-  is_filled: z39.boolean().optional(),
-  points: z39.array(point),
-  subcircuit_id: z39.string().optional()
+import { z as z40 } from "zod";
+var schematic_path = z40.object({
+  type: z40.literal("schematic_path"),
+  schematic_component_id: z40.string(),
+  fill_color: z40.enum(["red", "blue"]).optional(),
+  is_filled: z40.boolean().optional(),
+  points: z40.array(point),
+  subcircuit_id: z40.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_component.ts
-import { z as z40 } from "zod";
-var schematic_pin_styles = z40.record(
-  z40.object({
+import { z as z41 } from "zod";
+var schematic_pin_styles = z41.record(
+  z41.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z40.object({
-  left_size: z40.number(),
-  right_size: z40.number(),
-  top_size: z40.number().optional(),
-  bottom_size: z40.number().optional()
+var schematic_component_port_arrangement_by_size = z41.object({
+  left_size: z41.number(),
+  right_size: z41.number(),
+  top_size: z41.number().optional(),
+  bottom_size: z41.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z40.object({
-  left_side: z40.object({
-    pins: z40.array(z40.number()),
+var schematic_component_port_arrangement_by_sides = z41.object({
+  left_side: z41.object({
+    pins: z41.array(z41.number()),
     // @ts-ignore
-    direction: z40.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z41.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z40.object({
-    pins: z40.array(z40.number()),
+  right_side: z41.object({
+    pins: z41.array(z41.number()),
     // @ts-ignore
-    direction: z40.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z41.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z40.object({
-    pins: z40.array(z40.number()),
+  top_side: z41.object({
+    pins: z41.array(z41.number()),
     // @ts-ignore
-    direction: z40.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z41.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z40.object({
-    pins: z40.array(z40.number()),
+  bottom_side: z41.object({
+    pins: z41.array(z41.number()),
     // @ts-ignore
-    direction: z40.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z41.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z40.union([
+var port_arrangement = z41.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z40.object({
-  type: z40.literal("schematic_component"),
+var schematic_component = z41.object({
+  type: z41.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z40.string(),
-  schematic_component_id: z40.string(),
+  source_component_id: z41.string(),
+  schematic_component_id: z41.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z40.string().optional(),
+  symbol_name: z41.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z40.record(z40.string()).optional(),
-  symbol_display_value: z40.string().optional(),
-  subcircuit_id: z40.string().optional(),
-  schematic_group_id: z40.string().optional()
+  port_labels: z41.record(z41.string()).optional(),
+  symbol_display_value: z41.string().optional(),
+  subcircuit_id: z41.string().optional(),
+  schematic_group_id: z41.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_line.ts
-import { z as z41 } from "zod";
-var schematic_line = z41.object({
-  type: z41.literal("schematic_line"),
-  schematic_component_id: z41.string(),
+import { z as z42 } from "zod";
+var schematic_line = z42.object({
+  type: z42.literal("schematic_line"),
+  schematic_component_id: z42.string(),
   x1: distance,
   x2: distance,
   y1: distance,
   y2: distance,
-  subcircuit_id: z41.string().optional()
+  subcircuit_id: z42.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_trace.ts
-import { z as z42 } from "zod";
-var schematic_trace = z42.object({
-  type: z42.literal("schematic_trace"),
-  schematic_trace_id: z42.string(),
-  source_trace_id: z42.string(),
-  junctions: z42.array(
-    z42.object({
-      x: z42.number(),
-      y: z42.number()
+import { z as z43 } from "zod";
+var schematic_trace = z43.object({
+  type: z43.literal("schematic_trace"),
+  schematic_trace_id: z43.string(),
+  source_trace_id: z43.string(),
+  junctions: z43.array(
+    z43.object({
+      x: z43.number(),
+      y: z43.number()
     })
   ),
-  edges: z42.array(
-    z42.object({
-      from: z42.object({
-        x: z42.number(),
-        y: z42.number()
+  edges: z43.array(
+    z43.object({
+      from: z43.object({
+        x: z43.number(),
+        y: z43.number()
       }),
-      to: z42.object({
-        x: z42.number(),
-        y: z42.number()
+      to: z43.object({
+        x: z43.number(),
+        y: z43.number()
       }),
-      is_crossing: z42.boolean().optional(),
-      from_schematic_port_id: z42.string().optional(),
-      to_schematic_port_id: z42.string().optional()
+      is_crossing: z43.boolean().optional(),
+      from_schematic_port_id: z43.string().optional(),
+      to_schematic_port_id: z43.string().optional()
     })
   ),
-  subcircuit_id: z42.string().optional()
+  subcircuit_id: z43.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-import { z as z44 } from "zod";
+import { z as z45 } from "zod";
 
 // src/common/FivePointAnchor.ts
-import { z as z43 } from "zod";
-var fivePointAnchor = z43.enum([
+import { z as z44 } from "zod";
+var fivePointAnchor = z44.enum([
   "center",
   "left",
   "right",
@@ -817,109 +833,109 @@ var fivePointAnchor = z43.enum([
 expectTypesMatch(true);
 
 // src/schematic/schematic_text.ts
-var schematic_text = z44.object({
-  type: z44.literal("schematic_text"),
-  schematic_component_id: z44.string().optional(),
-  schematic_text_id: z44.string(),
-  text: z44.string(),
-  font_size: z44.number().default(0.18),
-  position: z44.object({
+var schematic_text = z45.object({
+  type: z45.literal("schematic_text"),
+  schematic_component_id: z45.string().optional(),
+  schematic_text_id: z45.string(),
+  text: z45.string(),
+  font_size: z45.number().default(0.18),
+  position: z45.object({
     x: distance,
     y: distance
   }),
-  rotation: z44.number().default(0),
-  anchor: z44.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z44.string().default("#000000"),
-  subcircuit_id: z44.string().optional()
+  rotation: z45.number().default(0),
+  anchor: z45.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z45.string().default("#000000"),
+  subcircuit_id: z45.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_port.ts
-import { z as z45 } from "zod";
-var schematic_port = z45.object({
-  type: z45.literal("schematic_port"),
-  schematic_port_id: z45.string(),
-  source_port_id: z45.string(),
-  schematic_component_id: z45.string().optional(),
+import { z as z46 } from "zod";
+var schematic_port = z46.object({
+  type: z46.literal("schematic_port"),
+  schematic_port_id: z46.string(),
+  source_port_id: z46.string(),
+  schematic_component_id: z46.string().optional(),
   center: point,
-  facing_direction: z45.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z45.number().optional(),
-  side_of_component: z45.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z45.number().optional(),
-  pin_number: z45.number().optional(),
-  display_pin_label: z45.string().optional(),
-  subcircuit_id: z45.string().optional(),
-  is_connected: z45.boolean().optional()
+  facing_direction: z46.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z46.number().optional(),
+  side_of_component: z46.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z46.number().optional(),
+  pin_number: z46.number().optional(),
+  display_pin_label: z46.string().optional(),
+  subcircuit_id: z46.string().optional(),
+  is_connected: z46.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
 
 // src/schematic/schematic_net_label.ts
-import { z as z46 } from "zod";
-var schematic_net_label = z46.object({
-  type: z46.literal("schematic_net_label"),
+import { z as z47 } from "zod";
+var schematic_net_label = z47.object({
+  type: z47.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z46.string().optional(),
-  source_trace_id: z46.string().optional(),
-  source_net_id: z46.string(),
+  schematic_trace_id: z47.string().optional(),
+  source_trace_id: z47.string().optional(),
+  source_net_id: z47.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z46.enum(["top", "bottom", "left", "right"]),
-  text: z46.string(),
-  symbol_name: z46.string().optional(),
-  is_movable: z46.boolean().optional(),
-  subcircuit_id: z46.string().optional()
+  anchor_side: z47.enum(["top", "bottom", "left", "right"]),
+  text: z47.string(),
+  symbol_name: z47.string().optional(),
+  is_movable: z47.boolean().optional(),
+  subcircuit_id: z47.string().optional()
 });
 expectTypesMatch(true);
 
 // src/schematic/schematic_error.ts
-import { z as z47 } from "zod";
-var schematic_error = z47.object({
-  type: z47.literal("schematic_error"),
-  schematic_error_id: z47.string(),
+import { z as z48 } from "zod";
+var schematic_error = z48.object({
+  type: z48.literal("schematic_error"),
+  schematic_error_id: z48.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z47.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z47.string(),
-  subcircuit_id: z47.string().optional()
+  error_type: z48.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z48.string(),
+  subcircuit_id: z48.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_layout_error.ts
-import { z as z48 } from "zod";
-var schematic_layout_error = z48.object({
-  type: z48.literal("schematic_layout_error"),
+import { z as z49 } from "zod";
+var schematic_layout_error = z49.object({
+  type: z49.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z48.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z48.string(),
-  source_group_id: z48.string(),
-  schematic_group_id: z48.string(),
-  subcircuit_id: z48.string().optional()
+  error_type: z49.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z49.string(),
+  source_group_id: z49.string(),
+  schematic_group_id: z49.string(),
+  subcircuit_id: z49.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
 
 // src/schematic/schematic_debug_object.ts
-import { z as z49 } from "zod";
-var schematic_debug_object_base = z49.object({
-  type: z49.literal("schematic_debug_object"),
-  label: z49.string().optional(),
-  subcircuit_id: z49.string().optional()
+import { z as z50 } from "zod";
+var schematic_debug_object_base = z50.object({
+  type: z50.literal("schematic_debug_object"),
+  label: z50.string().optional(),
+  subcircuit_id: z50.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z49.literal("rect"),
+  shape: z50.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z49.literal("line"),
+  shape: z50.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z49.literal("point"),
+  shape: z50.literal("point"),
   center: point
 });
-var schematic_debug_object = z49.discriminatedUnion("shape", [
+var schematic_debug_object = z50.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
@@ -927,93 +943,93 @@ var schematic_debug_object = z49.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/schematic/schematic_voltage_probe.ts
-import { z as z50 } from "zod";
-var schematic_voltage_probe = z50.object({
-  type: z50.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z50.string(),
+import { z as z51 } from "zod";
+var schematic_voltage_probe = z51.object({
+  type: z51.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z51.string(),
   position: point,
-  schematic_trace_id: z50.string(),
+  schematic_trace_id: z51.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z50.string().optional()
+  subcircuit_id: z51.string().optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
 
 // src/schematic/schematic_manual_edit_conflict_warning.ts
-import { z as z51 } from "zod";
-var schematic_manual_edit_conflict_warning = z51.object({
-  type: z51.literal("schematic_manual_edit_conflict_warning"),
+import { z as z52 } from "zod";
+var schematic_manual_edit_conflict_warning = z52.object({
+  type: z52.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z51.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z51.string(),
-  schematic_component_id: z51.string(),
-  schematic_group_id: z51.string().optional(),
-  subcircuit_id: z51.string().optional(),
-  source_component_id: z51.string()
+  warning_type: z52.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z52.string(),
+  schematic_component_id: z52.string(),
+  schematic_group_id: z52.string().optional(),
+  subcircuit_id: z52.string().optional(),
+  source_component_id: z52.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
 
 // src/schematic/schematic_group.ts
-import { z as z52 } from "zod";
-var schematic_group = z52.object({
-  type: z52.literal("schematic_group"),
+import { z as z53 } from "zod";
+var schematic_group = z53.object({
+  type: z53.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z52.string(),
-  is_subcircuit: z52.boolean().optional(),
-  subcircuit_id: z52.string().optional(),
+  source_group_id: z53.string(),
+  is_subcircuit: z53.boolean().optional(),
+  subcircuit_id: z53.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z52.array(z52.string()),
-  name: z52.string().optional(),
-  description: z52.string().optional()
+  schematic_component_ids: z53.array(z53.string()),
+  name: z53.string().optional(),
+  description: z53.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table.ts
-import { z as z53 } from "zod";
-var schematic_table = z53.object({
-  type: z53.literal("schematic_table"),
+import { z as z54 } from "zod";
+var schematic_table = z54.object({
+  type: z54.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z53.array(distance),
-  row_heights: z53.array(distance),
+  column_widths: z54.array(distance),
+  row_heights: z54.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z53.string().optional(),
-  schematic_component_id: z53.string().optional(),
+  subcircuit_id: z54.string().optional(),
+  schematic_component_id: z54.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
 
 // src/schematic/schematic_table_cell.ts
-import { z as z54 } from "zod";
-var schematic_table_cell = z54.object({
-  type: z54.literal("schematic_table_cell"),
+import { z as z55 } from "zod";
+var schematic_table_cell = z55.object({
+  type: z55.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z54.string(),
-  start_row_index: z54.number(),
-  end_row_index: z54.number(),
-  start_column_index: z54.number(),
-  end_column_index: z54.number(),
-  text: z54.string().optional(),
+  schematic_table_id: z55.string(),
+  start_row_index: z55.number(),
+  end_row_index: z55.number(),
+  start_column_index: z55.number(),
+  end_column_index: z55.number(),
+  text: z55.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z54.enum(["left", "center", "right"]).optional(),
-  vertical_align: z54.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z55.enum(["left", "center", "right"]).optional(),
+  vertical_align: z55.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z54.string().optional()
+  subcircuit_id: z55.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
 
 // src/pcb/properties/layer_ref.ts
-import { z as z55 } from "zod";
+import { z as z56 } from "zod";
 var all_layers = [
   "top",
   "bottom",
@@ -1024,9 +1040,9 @@ var all_layers = [
   "inner5",
   "inner6"
 ];
-var layer_string = z55.enum(all_layers);
+var layer_string = z56.enum(all_layers);
 var layer_ref = layer_string.or(
-  z55.object({
+  z56.object({
     name: layer_string
   })
 ).transform((layer) => {
@@ -1036,56 +1052,56 @@ var layer_ref = layer_string.or(
   return layer.name;
 });
 expectTypesMatch(true);
-var visible_layer = z55.enum(["top", "bottom"]);
+var visible_layer = z56.enum(["top", "bottom"]);
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z56 } from "zod";
-var pcb_route_hint = z56.object({
+import { z as z57 } from "zod";
+var pcb_route_hint = z57.object({
   x: distance,
   y: distance,
-  via: z56.boolean().optional(),
+  via: z57.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z56.array(pcb_route_hint);
+var pcb_route_hints = z57.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z57 } from "zod";
-var route_hint_point = z57.object({
+import { z as z58 } from "zod";
+var route_hint_point = z58.object({
   x: distance,
   y: distance,
-  via: z57.boolean().optional(),
+  via: z58.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_component.ts
-import { z as z58 } from "zod";
-var pcb_component = z58.object({
-  type: z58.literal("pcb_component"),
+import { z as z59 } from "zod";
+var pcb_component = z59.object({
+  type: z59.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z58.string(),
+  source_component_id: z59.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  subcircuit_id: z58.string().optional(),
-  pcb_group_id: z58.string().optional()
+  subcircuit_id: z59.string().optional(),
+  pcb_group_id: z59.string().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z59 } from "zod";
-var pcb_hole_circle_or_square = z59.object({
-  type: z59.literal("pcb_hole"),
+import { z as z60 } from "zod";
+var pcb_hole_circle_or_square = z60.object({
+  type: z60.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
-  hole_shape: z59.enum(["circle", "square"]),
-  hole_diameter: z59.number(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
+  hole_shape: z60.enum(["circle", "square"]),
+  hole_diameter: z60.number(),
   x: distance,
   y: distance
 });
@@ -1093,14 +1109,14 @@ var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z59.object({
-  type: z59.literal("pcb_hole"),
+var pcb_hole_oval = z60.object({
+  type: z60.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
-  hole_shape: z59.literal("oval"),
-  hole_width: z59.number(),
-  hole_height: z59.number(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
+  hole_shape: z60.literal("oval"),
+  hole_width: z60.number(),
+  hole_height: z60.number(),
   x: distance,
   y: distance
 });
@@ -1111,98 +1127,98 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z60 } from "zod";
-var pcb_plated_hole_circle = z60.object({
-  type: z60.literal("pcb_plated_hole"),
-  shape: z60.literal("circle"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  outer_diameter: z60.number(),
-  hole_diameter: z60.number(),
+import { z as z61 } from "zod";
+var pcb_plated_hole_circle = z61.object({
+  type: z61.literal("pcb_plated_hole"),
+  shape: z61.literal("circle"),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  outer_diameter: z61.number(),
+  hole_diameter: z61.number(),
   x: distance,
   y: distance,
-  layers: z60.array(layer_ref),
-  port_hints: z60.array(z60.string()).optional(),
-  pcb_component_id: z60.string().optional(),
-  pcb_port_id: z60.string().optional(),
+  layers: z61.array(layer_ref),
+  port_hints: z61.array(z61.string()).optional(),
+  pcb_component_id: z61.string().optional(),
+  pcb_port_id: z61.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole_oval = z60.object({
-  type: z60.literal("pcb_plated_hole"),
-  shape: z60.enum(["oval", "pill"]),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  outer_width: z60.number(),
-  outer_height: z60.number(),
-  hole_width: z60.number(),
-  hole_height: z60.number(),
+var pcb_plated_hole_oval = z61.object({
+  type: z61.literal("pcb_plated_hole"),
+  shape: z61.enum(["oval", "pill"]),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  outer_width: z61.number(),
+  outer_height: z61.number(),
+  hole_width: z61.number(),
+  hole_height: z61.number(),
   x: distance,
   y: distance,
-  layers: z60.array(layer_ref),
-  port_hints: z60.array(z60.string()).optional(),
-  pcb_component_id: z60.string().optional(),
-  pcb_port_id: z60.string().optional(),
+  layers: z61.array(layer_ref),
+  port_hints: z61.array(z61.string()).optional(),
+  pcb_component_id: z61.string().optional(),
+  pcb_port_id: z61.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_circular_hole_with_rect_pad = z60.object({
-  type: z60.literal("pcb_plated_hole"),
-  shape: z60.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  hole_shape: z60.literal("circle"),
-  pad_shape: z60.literal("rect"),
-  hole_diameter: z60.number(),
-  rect_pad_width: z60.number(),
-  rect_pad_height: z60.number(),
+var pcb_circular_hole_with_rect_pad = z61.object({
+  type: z61.literal("pcb_plated_hole"),
+  shape: z61.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  hole_shape: z61.literal("circle"),
+  pad_shape: z61.literal("rect"),
+  hole_diameter: z61.number(),
+  rect_pad_width: z61.number(),
+  rect_pad_height: z61.number(),
   x: distance,
   y: distance,
-  layers: z60.array(layer_ref),
-  port_hints: z60.array(z60.string()).optional(),
-  pcb_component_id: z60.string().optional(),
-  pcb_port_id: z60.string().optional(),
+  layers: z61.array(layer_ref),
+  port_hints: z61.array(z61.string()).optional(),
+  pcb_component_id: z61.string().optional(),
+  pcb_port_id: z61.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_pill_hole_with_rect_pad = z60.object({
-  type: z60.literal("pcb_plated_hole"),
-  shape: z60.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  hole_shape: z60.literal("pill"),
-  pad_shape: z60.literal("rect"),
-  hole_width: z60.number(),
-  hole_height: z60.number(),
-  rect_pad_width: z60.number(),
-  rect_pad_height: z60.number(),
+var pcb_pill_hole_with_rect_pad = z61.object({
+  type: z61.literal("pcb_plated_hole"),
+  shape: z61.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  hole_shape: z61.literal("pill"),
+  pad_shape: z61.literal("rect"),
+  hole_width: z61.number(),
+  hole_height: z61.number(),
+  rect_pad_width: z61.number(),
+  rect_pad_height: z61.number(),
   x: distance,
   y: distance,
-  layers: z60.array(layer_ref),
-  port_hints: z60.array(z60.string()).optional(),
-  pcb_component_id: z60.string().optional(),
-  pcb_port_id: z60.string().optional(),
+  layers: z61.array(layer_ref),
+  port_hints: z61.array(z61.string()).optional(),
+  pcb_component_id: z61.string().optional(),
+  pcb_port_id: z61.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_rotated_pill_hole_with_rect_pad = z60.object({
-  type: z60.literal("pcb_plated_hole"),
-  shape: z60.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
-  hole_shape: z60.literal("rotated_pill"),
-  pad_shape: z60.literal("rect"),
-  hole_width: z60.number(),
-  hole_height: z60.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z61.object({
+  type: z61.literal("pcb_plated_hole"),
+  shape: z61.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
+  hole_shape: z61.literal("rotated_pill"),
+  pad_shape: z61.literal("rect"),
+  hole_width: z61.number(),
+  hole_height: z61.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z60.number(),
-  rect_pad_height: z60.number(),
+  rect_pad_width: z61.number(),
+  rect_pad_height: z61.number(),
   rect_ccw_rotation: rotation,
   x: distance,
   y: distance,
-  layers: z60.array(layer_ref),
-  port_hints: z60.array(z60.string()).optional(),
-  pcb_component_id: z60.string().optional(),
-  pcb_port_id: z60.string().optional(),
+  layers: z61.array(layer_ref),
+  port_hints: z61.array(z61.string()).optional(),
+  pcb_component_id: z61.string().optional(),
+  pcb_port_id: z61.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole = z60.union([
+var pcb_plated_hole = z61.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -1218,113 +1234,113 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z61 } from "zod";
-var pcb_port = z61.object({
-  type: z61.literal("pcb_port"),
+import { z as z62 } from "zod";
+var pcb_port = z62.object({
+  type: z62.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z61.string().optional(),
-  subcircuit_id: z61.string().optional(),
-  source_port_id: z61.string(),
-  pcb_component_id: z61.string(),
+  pcb_group_id: z62.string().optional(),
+  subcircuit_id: z62.string().optional(),
+  source_port_id: z62.string(),
+  pcb_component_id: z62.string(),
   x: distance,
   y: distance,
-  layers: z61.array(layer_ref)
+  layers: z62.array(layer_ref)
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z62 } from "zod";
-var pcb_smtpad_circle = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("circle"),
+import { z as z63 } from "zod";
+var pcb_smtpad_circle = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
   x: distance,
   y: distance,
-  radius: z62.number(),
+  radius: z63.number(),
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad_rect = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("rect"),
+var pcb_smtpad_rect = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
   x: distance,
   y: distance,
-  width: z62.number(),
-  height: z62.number(),
+  width: z63.number(),
+  height: z63.number(),
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad_rotated_rect = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
   x: distance,
   y: distance,
-  width: z62.number(),
-  height: z62.number(),
+  width: z63.number(),
+  height: z63.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad_pill = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("pill"),
+var pcb_smtpad_pill = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
   x: distance,
   y: distance,
-  width: z62.number(),
-  height: z62.number(),
-  radius: z62.number(),
+  width: z63.number(),
+  height: z63.number(),
+  radius: z63.number(),
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad_rotated_pill = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("rotated_pill"),
+var pcb_smtpad_rotated_pill = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
   x: distance,
   y: distance,
-  width: z62.number(),
-  height: z62.number(),
-  radius: z62.number(),
+  width: z63.number(),
+  height: z63.number(),
+  radius: z63.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad_polygon = z62.object({
-  type: z62.literal("pcb_smtpad"),
-  shape: z62.literal("polygon"),
+var pcb_smtpad_polygon = z63.object({
+  type: z63.literal("pcb_smtpad"),
+  shape: z63.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
-  points: z62.array(point),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  points: z63.array(point),
   layer: layer_ref,
-  port_hints: z62.array(z62.string()).optional(),
-  pcb_component_id: z62.string().optional(),
-  pcb_port_id: z62.string().optional()
+  port_hints: z63.array(z63.string()).optional(),
+  pcb_component_id: z63.string().optional(),
+  pcb_port_id: z63.string().optional()
 });
-var pcb_smtpad = z62.discriminatedUnion("shape", [
+var pcb_smtpad = z63.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -1340,79 +1356,79 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z63 } from "zod";
-var pcb_solder_paste_circle = z63.object({
-  type: z63.literal("pcb_solder_paste"),
-  shape: z63.literal("circle"),
+import { z as z64 } from "zod";
+var pcb_solder_paste_circle = z64.object({
+  type: z64.literal("pcb_solder_paste"),
+  shape: z64.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   x: distance,
   y: distance,
-  radius: z63.number(),
+  radius: z64.number(),
   layer: layer_ref,
-  pcb_component_id: z63.string().optional(),
-  pcb_smtpad_id: z63.string().optional()
+  pcb_component_id: z64.string().optional(),
+  pcb_smtpad_id: z64.string().optional()
 });
-var pcb_solder_paste_rect = z63.object({
-  type: z63.literal("pcb_solder_paste"),
-  shape: z63.literal("rect"),
+var pcb_solder_paste_rect = z64.object({
+  type: z64.literal("pcb_solder_paste"),
+  shape: z64.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   x: distance,
   y: distance,
-  width: z63.number(),
-  height: z63.number(),
+  width: z64.number(),
+  height: z64.number(),
   layer: layer_ref,
-  pcb_component_id: z63.string().optional(),
-  pcb_smtpad_id: z63.string().optional()
+  pcb_component_id: z64.string().optional(),
+  pcb_smtpad_id: z64.string().optional()
 });
-var pcb_solder_paste_pill = z63.object({
-  type: z63.literal("pcb_solder_paste"),
-  shape: z63.literal("pill"),
+var pcb_solder_paste_pill = z64.object({
+  type: z64.literal("pcb_solder_paste"),
+  shape: z64.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   x: distance,
   y: distance,
-  width: z63.number(),
-  height: z63.number(),
-  radius: z63.number(),
+  width: z64.number(),
+  height: z64.number(),
+  radius: z64.number(),
   layer: layer_ref,
-  pcb_component_id: z63.string().optional(),
-  pcb_smtpad_id: z63.string().optional()
+  pcb_component_id: z64.string().optional(),
+  pcb_smtpad_id: z64.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z63.object({
-  type: z63.literal("pcb_solder_paste"),
-  shape: z63.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z64.object({
+  type: z64.literal("pcb_solder_paste"),
+  shape: z64.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   x: distance,
   y: distance,
-  width: z63.number(),
-  height: z63.number(),
+  width: z64.number(),
+  height: z64.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z63.string().optional(),
-  pcb_smtpad_id: z63.string().optional()
+  pcb_component_id: z64.string().optional(),
+  pcb_smtpad_id: z64.string().optional()
 });
-var pcb_solder_paste_oval = z63.object({
-  type: z63.literal("pcb_solder_paste"),
-  shape: z63.literal("oval"),
+var pcb_solder_paste_oval = z64.object({
+  type: z64.literal("pcb_solder_paste"),
+  shape: z64.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   x: distance,
   y: distance,
-  width: z63.number(),
-  height: z63.number(),
+  width: z64.number(),
+  height: z64.number(),
   layer: layer_ref,
-  pcb_component_id: z63.string().optional(),
-  pcb_smtpad_id: z63.string().optional()
+  pcb_component_id: z64.string().optional(),
+  pcb_smtpad_id: z64.string().optional()
 });
-var pcb_solder_paste = z63.union([
+var pcb_solder_paste = z64.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -1428,134 +1444,134 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z64 } from "zod";
-var pcb_text = z64.object({
-  type: z64.literal("pcb_text"),
+import { z as z65 } from "zod";
+var pcb_text = z65.object({
+  type: z65.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z64.string().optional(),
-  subcircuit_id: z64.string().optional(),
-  text: z64.string(),
+  pcb_group_id: z65.string().optional(),
+  subcircuit_id: z65.string().optional(),
+  text: z65.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z64.number(),
+  lines: z65.number(),
   // @ts-ignore
-  align: z64.enum(["bottom-left"])
+  align: z65.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z65 } from "zod";
-var pcb_trace_route_point_wire = z65.object({
-  route_type: z65.literal("wire"),
+import { z as z66 } from "zod";
+var pcb_trace_route_point_wire = z66.object({
+  route_type: z66.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z65.string().optional(),
-  end_pcb_port_id: z65.string().optional(),
+  start_pcb_port_id: z66.string().optional(),
+  end_pcb_port_id: z66.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z65.object({
-  route_type: z65.literal("via"),
+var pcb_trace_route_point_via = z66.object({
+  route_type: z66.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z65.string(),
-  to_layer: z65.string()
+  from_layer: z66.string(),
+  to_layer: z66.string()
 });
-var pcb_trace_route_point = z65.union([
+var pcb_trace_route_point = z66.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z65.object({
-  type: z65.literal("pcb_trace"),
-  source_trace_id: z65.string().optional(),
-  pcb_component_id: z65.string().optional(),
+var pcb_trace = z66.object({
+  type: z66.literal("pcb_trace"),
+  source_trace_id: z66.string().optional(),
+  pcb_component_id: z66.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z65.string().optional(),
-  subcircuit_id: z65.string().optional(),
-  route_thickness_mode: z65.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z65.number().optional(),
-  should_round_corners: z65.boolean().optional(),
-  trace_length: z65.number().optional(),
-  route: z65.array(pcb_trace_route_point)
+  pcb_group_id: z66.string().optional(),
+  subcircuit_id: z66.string().optional(),
+  route_thickness_mode: z66.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z66.number().optional(),
+  should_round_corners: z66.boolean().optional(),
+  trace_length: z66.number().optional(),
+  route: z66.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z66 } from "zod";
-var pcb_trace_error = z66.object({
-  type: z66.literal("pcb_trace_error"),
+import { z as z67 } from "zod";
+var pcb_trace_error = z67.object({
+  type: z67.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z66.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z66.string(),
+  error_type: z67.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z67.string(),
   center: point.optional(),
-  pcb_trace_id: z66.string(),
-  source_trace_id: z66.string(),
-  pcb_component_ids: z66.array(z66.string()),
-  pcb_port_ids: z66.array(z66.string()),
-  subcircuit_id: z66.string().optional()
+  pcb_trace_id: z67.string(),
+  source_trace_id: z67.string(),
+  pcb_component_ids: z67.array(z67.string()),
+  pcb_port_ids: z67.array(z67.string()),
+  subcircuit_id: z67.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_missing_error.ts
-import { z as z67 } from "zod";
-var pcb_trace_missing_error = z67.object({
-  type: z67.literal("pcb_trace_missing_error"),
+import { z as z68 } from "zod";
+var pcb_trace_missing_error = z68.object({
+  type: z68.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z67.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z67.string(),
+  error_type: z68.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z68.string(),
   center: point.optional(),
-  source_trace_id: z67.string(),
-  pcb_component_ids: z67.array(z67.string()),
-  pcb_port_ids: z67.array(z67.string()),
-  subcircuit_id: z67.string().optional()
+  source_trace_id: z68.string(),
+  pcb_component_ids: z68.array(z68.string()),
+  pcb_port_ids: z68.array(z68.string()),
+  subcircuit_id: z68.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z68 } from "zod";
-var pcb_port_not_matched_error = z68.object({
-  type: z68.literal("pcb_port_not_matched_error"),
+import { z as z69 } from "zod";
+var pcb_port_not_matched_error = z69.object({
+  type: z69.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z68.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z68.string(),
-  pcb_component_ids: z68.array(z68.string()),
-  subcircuit_id: z68.string().optional()
+  error_type: z69.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z69.string(),
+  pcb_component_ids: z69.array(z69.string()),
+  subcircuit_id: z69.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_connected_error.ts
-import { z as z69 } from "zod";
-var pcb_port_not_connected_error = z69.object({
-  type: z69.literal("pcb_port_not_connected_error"),
+import { z as z70 } from "zod";
+var pcb_port_not_connected_error = z70.object({
+  type: z70.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z69.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z69.string(),
-  pcb_port_ids: z69.array(z69.string()),
-  pcb_component_ids: z69.array(z69.string()),
-  subcircuit_id: z69.string().optional()
+  error_type: z70.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z70.string(),
+  pcb_port_ids: z70.array(z70.string()),
+  pcb_component_ids: z70.array(z70.string()),
+  subcircuit_id: z70.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_via.ts
-import { z as z70 } from "zod";
-var pcb_via = z70.object({
-  type: z70.literal("pcb_via"),
+import { z as z71 } from "zod";
+var pcb_via = z71.object({
+  type: z71.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -1564,59 +1580,59 @@ var pcb_via = z70.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z70.array(layer_ref),
-  pcb_trace_id: z70.string().optional()
+  layers: z71.array(layer_ref),
+  pcb_trace_id: z71.string().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z71 } from "zod";
-var pcb_board = z71.object({
-  type: z71.literal("pcb_board"),
+import { z as z72 } from "zod";
+var pcb_board = z72.object({
+  type: z72.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  is_subcircuit: z71.boolean().optional(),
-  subcircuit_id: z71.string().optional(),
+  is_subcircuit: z72.boolean().optional(),
+  subcircuit_id: z72.string().optional(),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z71.number().optional().default(4),
-  outline: z71.array(point).optional(),
-  material: z71.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z72.number().optional().default(4),
+  outline: z72.array(point).optional(),
+  material: z72.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z72 } from "zod";
-var pcb_placement_error = z72.object({
-  type: z72.literal("pcb_placement_error"),
+import { z as z73 } from "zod";
+var pcb_placement_error = z73.object({
+  type: z73.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z72.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z72.string(),
-  subcircuit_id: z72.string().optional()
+  error_type: z73.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z73.string(),
+  subcircuit_id: z73.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z73 } from "zod";
-var pcb_trace_hint = z73.object({
-  type: z73.literal("pcb_trace_hint"),
+import { z as z74 } from "zod";
+var pcb_trace_hint = z74.object({
+  type: z74.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z73.string(),
-  pcb_component_id: z73.string(),
-  route: z73.array(route_hint_point),
-  subcircuit_id: z73.string().optional()
+  pcb_port_id: z74.string(),
+  pcb_component_id: z74.string(),
+  route: z74.array(route_hint_point),
+  subcircuit_id: z74.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z74 } from "zod";
-var pcb_silkscreen_line = z74.object({
-  type: z74.literal("pcb_silkscreen_line"),
+import { z as z75 } from "zod";
+var pcb_silkscreen_line = z75.object({
+  type: z75.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z74.string(),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_component_id: z75.string(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -1627,67 +1643,67 @@ var pcb_silkscreen_line = z74.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z75 } from "zod";
-var pcb_silkscreen_path = z75.object({
-  type: z75.literal("pcb_silkscreen_path"),
+import { z as z76 } from "zod";
+var pcb_silkscreen_path = z76.object({
+  type: z76.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z75.string(),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
+  pcb_component_id: z76.string(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   layer: visible_layer,
-  route: z75.array(point),
+  route: z76.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z76 } from "zod";
-var pcb_silkscreen_text = z76.object({
-  type: z76.literal("pcb_silkscreen_text"),
+import { z as z77 } from "zod";
+var pcb_silkscreen_text = z77.object({
+  type: z77.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  font: z76.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
+  font: z77.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z76.string(),
-  text: z76.string(),
-  ccw_rotation: z76.number().optional(),
+  pcb_component_id: z77.string(),
+  text: z77.string(),
+  ccw_rotation: z77.number().optional(),
   layer: layer_ref,
-  is_mirrored: z76.boolean().default(false).optional(),
+  is_mirrored: z77.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z77 } from "zod";
-var pcb_silkscreen_rect = z77.object({
-  type: z77.literal("pcb_silkscreen_rect"),
+import { z as z78 } from "zod";
+var pcb_silkscreen_rect = z78.object({
+  type: z78.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z77.string(),
-  pcb_group_id: z77.string().optional(),
-  subcircuit_id: z77.string().optional(),
+  pcb_component_id: z78.string(),
+  pcb_group_id: z78.string().optional(),
+  subcircuit_id: z78.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
-  is_filled: z77.boolean().default(true).optional(),
-  has_stroke: z77.boolean().optional(),
-  is_stroke_dashed: z77.boolean().optional()
+  is_filled: z78.boolean().default(true).optional(),
+  has_stroke: z78.boolean().optional(),
+  is_stroke_dashed: z78.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z78 } from "zod";
-var pcb_silkscreen_circle = z78.object({
-  type: z78.literal("pcb_silkscreen_circle"),
+import { z as z79 } from "zod";
+var pcb_silkscreen_circle = z79.object({
+  type: z79.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z78.string(),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional(),
+  pcb_component_id: z79.string(),
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
@@ -1696,13 +1712,13 @@ var pcb_silkscreen_circle = z78.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z79 } from "zod";
-var pcb_silkscreen_oval = z79.object({
-  type: z79.literal("pcb_silkscreen_oval"),
+import { z as z80 } from "zod";
+var pcb_silkscreen_oval = z80.object({
+  type: z80.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z79.string(),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
+  pcb_component_id: z80.string(),
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -1711,103 +1727,103 @@ var pcb_silkscreen_oval = z79.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z80 } from "zod";
-var pcb_fabrication_note_text = z80.object({
-  type: z80.literal("pcb_fabrication_note_text"),
+import { z as z81 } from "zod";
+var pcb_fabrication_note_text = z81.object({
+  type: z81.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z80.string().optional(),
-  pcb_group_id: z80.string().optional(),
-  font: z80.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z81.string().optional(),
+  pcb_group_id: z81.string().optional(),
+  font: z81.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z80.string(),
-  text: z80.string(),
+  pcb_component_id: z81.string(),
+  text: z81.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z80.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z80.string().optional()
+  anchor_alignment: z81.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z81.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z81 } from "zod";
-var pcb_fabrication_note_path = z81.object({
-  type: z81.literal("pcb_fabrication_note_path"),
+import { z as z82 } from "zod";
+var pcb_fabrication_note_path = z82.object({
+  type: z82.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z81.string(),
-  subcircuit_id: z81.string().optional(),
+  pcb_component_id: z82.string(),
+  subcircuit_id: z82.string().optional(),
   layer: layer_ref,
-  route: z81.array(point),
+  route: z82.array(point),
   stroke_width: length,
-  color: z81.string().optional()
+  color: z82.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_footprint_overlap_error.ts
-import { z as z82 } from "zod";
-var pcb_footprint_overlap_error = z82.object({
-  type: z82.literal("pcb_footprint_overlap_error"),
+import { z as z83 } from "zod";
+var pcb_footprint_overlap_error = z83.object({
+  type: z83.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z82.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z82.string(),
-  pcb_smtpad_ids: z82.array(z82.string()).optional(),
-  pcb_plated_hole_ids: z82.array(z82.string()).optional(),
-  pcb_hole_ids: z82.array(z82.string()).optional(),
-  pcb_keepout_ids: z82.array(z82.string()).optional()
+  error_type: z83.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z83.string(),
+  pcb_smtpad_ids: z83.array(z83.string()).optional(),
+  pcb_plated_hole_ids: z83.array(z83.string()).optional(),
+  pcb_hole_ids: z83.array(z83.string()).optional(),
+  pcb_keepout_ids: z83.array(z83.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_keepout.ts
-import { z as z83 } from "zod";
-var pcb_keepout = z83.object({
-  type: z83.literal("pcb_keepout"),
-  shape: z83.literal("rect"),
-  pcb_group_id: z83.string().optional(),
-  subcircuit_id: z83.string().optional(),
+import { z as z84 } from "zod";
+var pcb_keepout = z84.object({
+  type: z84.literal("pcb_keepout"),
+  shape: z84.literal("rect"),
+  pcb_group_id: z84.string().optional(),
+  subcircuit_id: z84.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z83.string(),
-  layers: z83.array(z83.string()),
+  pcb_keepout_id: z84.string(),
+  layers: z84.array(z84.string()),
   // Specify layers where the keepout applies
-  description: z83.string().optional()
+  description: z84.string().optional()
   // Optional description of the keepout
 }).or(
-  z83.object({
-    type: z83.literal("pcb_keepout"),
-    shape: z83.literal("circle"),
-    pcb_group_id: z83.string().optional(),
-    subcircuit_id: z83.string().optional(),
+  z84.object({
+    type: z84.literal("pcb_keepout"),
+    shape: z84.literal("circle"),
+    pcb_group_id: z84.string().optional(),
+    subcircuit_id: z84.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z83.string(),
-    layers: z83.array(z83.string()),
+    pcb_keepout_id: z84.string(),
+    layers: z84.array(z84.string()),
     // Specify layers where the keepout applies
-    description: z83.string().optional()
+    description: z84.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z84 } from "zod";
-var pcb_cutout_base = z84.object({
-  type: z84.literal("pcb_cutout"),
+import { z as z85 } from "zod";
+var pcb_cutout_base = z85.object({
+  type: z85.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z84.string().optional(),
-  subcircuit_id: z84.string().optional()
+  pcb_group_id: z85.string().optional(),
+  subcircuit_id: z85.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z84.literal("rect"),
+  shape: z85.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -1815,17 +1831,17 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z84.literal("circle"),
+  shape: z85.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z84.literal("polygon"),
-  points: z84.array(point)
+  shape: z85.literal("polygon"),
+  points: z85.array(point)
 });
 expectTypesMatch(true);
-var pcb_cutout = z84.discriminatedUnion("shape", [
+var pcb_cutout = z85.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon
@@ -1833,83 +1849,83 @@ var pcb_cutout = z84.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z85 } from "zod";
-var pcb_missing_footprint_error = z85.object({
-  type: z85.literal("pcb_missing_footprint_error"),
+import { z as z86 } from "zod";
+var pcb_missing_footprint_error = z86.object({
+  type: z86.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z85.string().optional(),
-  subcircuit_id: z85.string().optional(),
-  error_type: z85.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z85.string(),
-  message: z85.string()
+  pcb_group_id: z86.string().optional(),
+  subcircuit_id: z86.string().optional(),
+  error_type: z86.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z86.string(),
+  message: z86.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_group.ts
-import { z as z86 } from "zod";
-var pcb_group = z86.object({
-  type: z86.literal("pcb_group"),
+import { z as z87 } from "zod";
+var pcb_group = z87.object({
+  type: z87.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z86.string(),
-  is_subcircuit: z86.boolean().optional(),
-  subcircuit_id: z86.string().optional(),
+  source_group_id: z87.string(),
+  is_subcircuit: z87.boolean().optional(),
+  subcircuit_id: z87.string().optional(),
   width: length,
   height: length,
   center: point,
-  pcb_component_ids: z86.array(z86.string()),
-  name: z86.string().optional(),
-  description: z86.string().optional(),
-  layout_mode: z86.string().optional(),
-  autorouter_configuration: z86.object({
+  pcb_component_ids: z87.array(z87.string()),
+  name: z87.string().optional(),
+  description: z87.string().optional(),
+  layout_mode: z87.string().optional(),
+  autorouter_configuration: z87.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z86.string().optional()
+  autorouter_used_string: z87.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z87 } from "zod";
-var pcb_autorouting_error = z87.object({
-  type: z87.literal("pcb_autorouting_error"),
+import { z as z88 } from "zod";
+var pcb_autorouting_error = z88.object({
+  type: z88.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z87.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z87.string(),
-  subcircuit_id: z87.string().optional()
+  error_type: z88.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z88.string(),
+  subcircuit_id: z88.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z88 } from "zod";
-var pcb_manual_edit_conflict_warning = z88.object({
-  type: z88.literal("pcb_manual_edit_conflict_warning"),
+import { z as z89 } from "zod";
+var pcb_manual_edit_conflict_warning = z89.object({
+  type: z89.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z88.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z88.string(),
-  pcb_component_id: z88.string(),
-  pcb_group_id: z88.string().optional(),
-  subcircuit_id: z88.string().optional(),
-  source_component_id: z88.string()
+  warning_type: z89.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z89.string(),
+  pcb_component_id: z89.string(),
+  pcb_group_id: z89.string().optional(),
+  subcircuit_id: z89.string().optional(),
+  source_component_id: z89.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z89 } from "zod";
-var pcb_breakout_point = z89.object({
-  type: z89.literal("pcb_breakout_point"),
+import { z as z90 } from "zod";
+var pcb_breakout_point = z90.object({
+  type: z90.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z89.string(),
-  subcircuit_id: z89.string().optional(),
-  source_trace_id: z89.string().optional(),
-  source_port_id: z89.string().optional(),
-  source_net_id: z89.string().optional(),
+  pcb_group_id: z90.string(),
+  subcircuit_id: z90.string().optional(),
+  source_trace_id: z90.string().optional(),
+  source_port_id: z90.string().optional(),
+  source_net_id: z90.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -1918,108 +1934,108 @@ var pcb_breakout_point = z89.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z90 } from "zod";
-var pcb_ground_plane = z90.object({
-  type: z90.literal("pcb_ground_plane"),
+import { z as z91 } from "zod";
+var pcb_ground_plane = z91.object({
+  type: z91.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z90.string(),
-  source_net_id: z90.string(),
-  pcb_group_id: z90.string().optional(),
-  subcircuit_id: z90.string().optional()
+  source_pcb_ground_plane_id: z91.string(),
+  source_net_id: z91.string(),
+  pcb_group_id: z91.string().optional(),
+  subcircuit_id: z91.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z91 } from "zod";
-var pcb_ground_plane_region = z91.object({
-  type: z91.literal("pcb_ground_plane_region"),
+import { z as z92 } from "zod";
+var pcb_ground_plane_region = z92.object({
+  type: z92.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z91.string(),
-  pcb_group_id: z91.string().optional(),
-  subcircuit_id: z91.string().optional(),
+  pcb_ground_plane_id: z92.string(),
+  pcb_group_id: z92.string().optional(),
+  subcircuit_id: z92.string().optional(),
   layer: layer_ref,
-  points: z91.array(point)
+  points: z92.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z92 } from "zod";
-var pcb_thermal_spoke = z92.object({
-  type: z92.literal("pcb_thermal_spoke"),
+import { z as z93 } from "zod";
+var pcb_thermal_spoke = z93.object({
+  type: z93.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z92.string(),
-  shape: z92.string(),
-  spoke_count: z92.number(),
+  pcb_ground_plane_id: z93.string(),
+  shape: z93.string(),
+  spoke_count: z93.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z92.string().optional(),
-  subcircuit_id: z92.string().optional()
+  pcb_plated_hole_id: z93.string().optional(),
+  subcircuit_id: z93.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z93 } from "zod";
-var cad_component = z93.object({
-  type: z93.literal("cad_component"),
-  cad_component_id: z93.string(),
-  pcb_component_id: z93.string(),
-  source_component_id: z93.string(),
+import { z as z94 } from "zod";
+var cad_component = z94.object({
+  type: z94.literal("cad_component"),
+  cad_component_id: z94.string(),
+  pcb_component_id: z94.string(),
+  source_component_id: z94.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z93.string().optional(),
+  subcircuit_id: z94.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z93.string().optional(),
-  model_obj_url: z93.string().optional(),
-  model_stl_url: z93.string().optional(),
-  model_3mf_url: z93.string().optional(),
-  model_jscad: z93.any().optional()
+  footprinter_string: z94.string().optional(),
+  model_obj_url: z94.string().optional(),
+  model_stl_url: z94.string().optional(),
+  model_3mf_url: z94.string().optional(),
+  model_jscad: z94.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/simulation/simulation_voltage_source.ts
-import { z as z94 } from "zod";
-var wave_shape = z94.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var simulation_dc_voltage_source = z94.object({
-  type: z94.literal("simulation_voltage_source"),
+import { z as z95 } from "zod";
+var wave_shape = z95.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var simulation_dc_voltage_source = z95.object({
+  type: z95.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z94.literal(true).optional().default(true),
-  positive_source_port_id: z94.string().optional(),
-  negative_source_port_id: z94.string().optional(),
-  positive_source_net_id: z94.string().optional(),
-  negative_source_net_id: z94.string().optional(),
+  is_dc_source: z95.literal(true).optional().default(true),
+  positive_source_port_id: z95.string().optional(),
+  negative_source_port_id: z95.string().optional(),
+  positive_source_net_id: z95.string().optional(),
+  negative_source_net_id: z95.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z94.object({
-  type: z94.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z95.object({
+  type: z95.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z94.literal(false),
-  terminal1_source_port_id: z94.string().optional(),
-  terminal2_source_port_id: z94.string().optional(),
-  terminal1_source_net_id: z94.string().optional(),
-  terminal2_source_net_id: z94.string().optional(),
+  is_dc_source: z95.literal(false),
+  terminal1_source_port_id: z95.string().optional(),
+  terminal2_source_port_id: z95.string().optional(),
+  terminal1_source_net_id: z95.string().optional(),
+  terminal2_source_net_id: z95.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
   wave_shape: wave_shape.optional(),
   phase: rotation.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z94.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z95.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z95 } from "zod";
-var any_circuit_element = z95.union([
+import { z as z96 } from "zod";
+var any_circuit_element = z96.union([
   source_trace,
   source_port,
   any_source_component,
@@ -2207,6 +2223,7 @@ export {
   source_pcb_ground_plane,
   source_port,
   source_project_metadata,
+  source_property_ignored_warning,
   source_simple_battery,
   source_simple_capacitor,
   source_simple_chip,