circuit-json 0.0.215 → 0.0.216

package/dist/index.mjs

@@ -948,8 +948,32 @@ var schematic_group = z51.object({
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
 
-// src/pcb/properties/layer_ref.ts
+// src/schematic/schematic_table.ts
 import { z as z52 } from "zod";
+var schematic_table_cell = z52.object({
+  text: z52.string(),
+  horizontal_align: z52.enum(["left", "center", "right"]).optional(),
+  vertical_align: z52.enum(["top", "middle", "bottom"]).optional(),
+  font_size: distance.optional()
+});
+expectTypesMatch(true);
+var schematic_table = z52.object({
+  type: z52.literal("schematic_table"),
+  schematic_table_id: z52.string(),
+  position: point,
+  rows: z52.array(z52.array(schematic_table_cell)),
+  column_widths: z52.array(distance),
+  row_heights: z52.array(distance),
+  cell_padding: distance.optional(),
+  border_width: distance.optional(),
+  subcircuit_id: z52.string().optional(),
+  schematic_component_id: z52.string().optional(),
+  anchor: ninePointAnchor.optional()
+}).describe("Defines a table on the schematic");
+expectTypesMatch(true);
+
+// src/pcb/properties/layer_ref.ts
+import { z as z53 } from "zod";
 var all_layers = [
   "top",
   "bottom",
@@ -960,9 +984,9 @@ var all_layers = [
   "inner5",
   "inner6"
 ];
-var layer_string = z52.enum(all_layers);
+var layer_string = z53.enum(all_layers);
 var layer_ref = layer_string.or(
-  z52.object({
+  z53.object({
     name: layer_string
   })
 ).transform((layer) => {
@@ -972,56 +996,56 @@ var layer_ref = layer_string.or(
   return layer.name;
 });
 expectTypesMatch(true);
-var visible_layer = z52.enum(["top", "bottom"]);
+var visible_layer = z53.enum(["top", "bottom"]);
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z53 } from "zod";
-var pcb_route_hint = z53.object({
+import { z as z54 } from "zod";
+var pcb_route_hint = z54.object({
   x: distance,
   y: distance,
-  via: z53.boolean().optional(),
+  via: z54.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z53.array(pcb_route_hint);
+var pcb_route_hints = z54.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z54 } from "zod";
-var route_hint_point = z54.object({
+import { z as z55 } from "zod";
+var route_hint_point = z55.object({
   x: distance,
   y: distance,
-  via: z54.boolean().optional(),
+  via: z55.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
 
 // src/pcb/pcb_component.ts
-import { z as z55 } from "zod";
-var pcb_component = z55.object({
-  type: z55.literal("pcb_component"),
+import { z as z56 } from "zod";
+var pcb_component = z56.object({
+  type: z56.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z55.string(),
+  source_component_id: z56.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  subcircuit_id: z55.string().optional(),
-  pcb_group_id: z55.string().optional()
+  subcircuit_id: z56.string().optional(),
+  pcb_group_id: z56.string().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z56 } from "zod";
-var pcb_hole_circle_or_square = z56.object({
-  type: z56.literal("pcb_hole"),
+import { z as z57 } from "zod";
+var pcb_hole_circle_or_square = z57.object({
+  type: z57.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z56.string().optional(),
-  subcircuit_id: z56.string().optional(),
-  hole_shape: z56.enum(["circle", "square"]),
-  hole_diameter: z56.number(),
+  pcb_group_id: z57.string().optional(),
+  subcircuit_id: z57.string().optional(),
+  hole_shape: z57.enum(["circle", "square"]),
+  hole_diameter: z57.number(),
   x: distance,
   y: distance
 });
@@ -1029,14 +1053,14 @@ var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z56.object({
-  type: z56.literal("pcb_hole"),
+var pcb_hole_oval = z57.object({
+  type: z57.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z56.string().optional(),
-  subcircuit_id: z56.string().optional(),
-  hole_shape: z56.literal("oval"),
-  hole_width: z56.number(),
-  hole_height: z56.number(),
+  pcb_group_id: z57.string().optional(),
+  subcircuit_id: z57.string().optional(),
+  hole_shape: z57.literal("oval"),
+  hole_width: z57.number(),
+  hole_height: z57.number(),
   x: distance,
   y: distance
 });
@@ -1047,77 +1071,77 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z57 } from "zod";
-var pcb_plated_hole_circle = z57.object({
-  type: z57.literal("pcb_plated_hole"),
-  shape: z57.literal("circle"),
-  pcb_group_id: z57.string().optional(),
-  subcircuit_id: z57.string().optional(),
-  outer_diameter: z57.number(),
-  hole_diameter: z57.number(),
+import { z as z58 } from "zod";
+var pcb_plated_hole_circle = z58.object({
+  type: z58.literal("pcb_plated_hole"),
+  shape: z58.literal("circle"),
+  pcb_group_id: z58.string().optional(),
+  subcircuit_id: z58.string().optional(),
+  outer_diameter: z58.number(),
+  hole_diameter: z58.number(),
   x: distance,
   y: distance,
-  layers: z57.array(layer_ref),
-  port_hints: z57.array(z57.string()).optional(),
-  pcb_component_id: z57.string().optional(),
-  pcb_port_id: z57.string().optional(),
+  layers: z58.array(layer_ref),
+  port_hints: z58.array(z58.string()).optional(),
+  pcb_component_id: z58.string().optional(),
+  pcb_port_id: z58.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole_oval = z57.object({
-  type: z57.literal("pcb_plated_hole"),
-  shape: z57.enum(["oval", "pill"]),
-  pcb_group_id: z57.string().optional(),
-  subcircuit_id: z57.string().optional(),
-  outer_width: z57.number(),
-  outer_height: z57.number(),
-  hole_width: z57.number(),
-  hole_height: z57.number(),
+var pcb_plated_hole_oval = z58.object({
+  type: z58.literal("pcb_plated_hole"),
+  shape: z58.enum(["oval", "pill"]),
+  pcb_group_id: z58.string().optional(),
+  subcircuit_id: z58.string().optional(),
+  outer_width: z58.number(),
+  outer_height: z58.number(),
+  hole_width: z58.number(),
+  hole_height: z58.number(),
   x: distance,
   y: distance,
-  layers: z57.array(layer_ref),
-  port_hints: z57.array(z57.string()).optional(),
-  pcb_component_id: z57.string().optional(),
-  pcb_port_id: z57.string().optional(),
+  layers: z58.array(layer_ref),
+  port_hints: z58.array(z58.string()).optional(),
+  pcb_component_id: z58.string().optional(),
+  pcb_port_id: z58.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_circular_hole_with_rect_pad = z57.object({
-  type: z57.literal("pcb_plated_hole"),
-  shape: z57.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z57.string().optional(),
-  subcircuit_id: z57.string().optional(),
-  hole_shape: z57.literal("circle"),
-  pad_shape: z57.literal("rect"),
-  hole_diameter: z57.number(),
-  rect_pad_width: z57.number(),
-  rect_pad_height: z57.number(),
+var pcb_circular_hole_with_rect_pad = z58.object({
+  type: z58.literal("pcb_plated_hole"),
+  shape: z58.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z58.string().optional(),
+  subcircuit_id: z58.string().optional(),
+  hole_shape: z58.literal("circle"),
+  pad_shape: z58.literal("rect"),
+  hole_diameter: z58.number(),
+  rect_pad_width: z58.number(),
+  rect_pad_height: z58.number(),
   x: distance,
   y: distance,
-  layers: z57.array(layer_ref),
-  port_hints: z57.array(z57.string()).optional(),
-  pcb_component_id: z57.string().optional(),
-  pcb_port_id: z57.string().optional(),
+  layers: z58.array(layer_ref),
+  port_hints: z58.array(z58.string()).optional(),
+  pcb_component_id: z58.string().optional(),
+  pcb_port_id: z58.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_pill_hole_with_rect_pad = z57.object({
-  type: z57.literal("pcb_plated_hole"),
-  shape: z57.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z57.string().optional(),
-  subcircuit_id: z57.string().optional(),
-  hole_shape: z57.literal("pill"),
-  pad_shape: z57.literal("rect"),
-  hole_width: z57.number(),
-  hole_height: z57.number(),
-  rect_pad_width: z57.number(),
-  rect_pad_height: z57.number(),
+var pcb_pill_hole_with_rect_pad = z58.object({
+  type: z58.literal("pcb_plated_hole"),
+  shape: z58.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z58.string().optional(),
+  subcircuit_id: z58.string().optional(),
+  hole_shape: z58.literal("pill"),
+  pad_shape: z58.literal("rect"),
+  hole_width: z58.number(),
+  hole_height: z58.number(),
+  rect_pad_width: z58.number(),
+  rect_pad_height: z58.number(),
   x: distance,
   y: distance,
-  layers: z57.array(layer_ref),
-  port_hints: z57.array(z57.string()).optional(),
-  pcb_component_id: z57.string().optional(),
-  pcb_port_id: z57.string().optional(),
+  layers: z58.array(layer_ref),
+  port_hints: z58.array(z58.string()).optional(),
+  pcb_component_id: z58.string().optional(),
+  pcb_port_id: z58.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole = z57.union([
+var pcb_plated_hole = z58.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
@@ -1131,96 +1155,96 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z58 } from "zod";
-var pcb_port = z58.object({
-  type: z58.literal("pcb_port"),
+import { z as z59 } from "zod";
+var pcb_port = z59.object({
+  type: z59.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z58.string().optional(),
-  subcircuit_id: z58.string().optional(),
-  source_port_id: z58.string(),
-  pcb_component_id: z58.string(),
+  pcb_group_id: z59.string().optional(),
+  subcircuit_id: z59.string().optional(),
+  source_port_id: z59.string(),
+  pcb_component_id: z59.string(),
   x: distance,
   y: distance,
-  layers: z58.array(layer_ref)
+  layers: z59.array(layer_ref)
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z59 } from "zod";
-var pcb_smtpad_circle = z59.object({
-  type: z59.literal("pcb_smtpad"),
-  shape: z59.literal("circle"),
+import { z as z60 } from "zod";
+var pcb_smtpad_circle = z60.object({
+  type: z60.literal("pcb_smtpad"),
+  shape: z60.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
   x: distance,
   y: distance,
-  radius: z59.number(),
+  radius: z60.number(),
   layer: layer_ref,
-  port_hints: z59.array(z59.string()).optional(),
-  pcb_component_id: z59.string().optional(),
-  pcb_port_id: z59.string().optional()
+  port_hints: z60.array(z60.string()).optional(),
+  pcb_component_id: z60.string().optional(),
+  pcb_port_id: z60.string().optional()
 });
-var pcb_smtpad_rect = z59.object({
-  type: z59.literal("pcb_smtpad"),
-  shape: z59.literal("rect"),
+var pcb_smtpad_rect = z60.object({
+  type: z60.literal("pcb_smtpad"),
+  shape: z60.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
   x: distance,
   y: distance,
-  width: z59.number(),
-  height: z59.number(),
+  width: z60.number(),
+  height: z60.number(),
   layer: layer_ref,
-  port_hints: z59.array(z59.string()).optional(),
-  pcb_component_id: z59.string().optional(),
-  pcb_port_id: z59.string().optional()
+  port_hints: z60.array(z60.string()).optional(),
+  pcb_component_id: z60.string().optional(),
+  pcb_port_id: z60.string().optional()
 });
-var pcb_smtpad_rotated_rect = z59.object({
-  type: z59.literal("pcb_smtpad"),
-  shape: z59.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z60.object({
+  type: z60.literal("pcb_smtpad"),
+  shape: z60.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
   x: distance,
   y: distance,
-  width: z59.number(),
-  height: z59.number(),
+  width: z60.number(),
+  height: z60.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z59.array(z59.string()).optional(),
-  pcb_component_id: z59.string().optional(),
-  pcb_port_id: z59.string().optional()
+  port_hints: z60.array(z60.string()).optional(),
+  pcb_component_id: z60.string().optional(),
+  pcb_port_id: z60.string().optional()
 });
-var pcb_smtpad_pill = z59.object({
-  type: z59.literal("pcb_smtpad"),
-  shape: z59.literal("pill"),
+var pcb_smtpad_pill = z60.object({
+  type: z60.literal("pcb_smtpad"),
+  shape: z60.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
   x: distance,
   y: distance,
-  width: z59.number(),
-  height: z59.number(),
-  radius: z59.number(),
+  width: z60.number(),
+  height: z60.number(),
+  radius: z60.number(),
   layer: layer_ref,
-  port_hints: z59.array(z59.string()).optional(),
-  pcb_component_id: z59.string().optional(),
-  pcb_port_id: z59.string().optional()
+  port_hints: z60.array(z60.string()).optional(),
+  pcb_component_id: z60.string().optional(),
+  pcb_port_id: z60.string().optional()
 });
-var pcb_smtpad_polygon = z59.object({
-  type: z59.literal("pcb_smtpad"),
-  shape: z59.literal("polygon"),
+var pcb_smtpad_polygon = z60.object({
+  type: z60.literal("pcb_smtpad"),
+  shape: z60.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z59.string().optional(),
-  subcircuit_id: z59.string().optional(),
-  points: z59.array(point),
+  pcb_group_id: z60.string().optional(),
+  subcircuit_id: z60.string().optional(),
+  points: z60.array(point),
   layer: layer_ref,
-  port_hints: z59.array(z59.string()).optional(),
-  pcb_component_id: z59.string().optional(),
-  pcb_port_id: z59.string().optional()
+  port_hints: z60.array(z60.string()).optional(),
+  pcb_component_id: z60.string().optional(),
+  pcb_port_id: z60.string().optional()
 });
-var pcb_smtpad = z59.discriminatedUnion("shape", [
+var pcb_smtpad = z60.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -1234,79 +1258,79 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z60 } from "zod";
-var pcb_solder_paste_circle = z60.object({
-  type: z60.literal("pcb_solder_paste"),
-  shape: z60.literal("circle"),
+import { z as z61 } from "zod";
+var pcb_solder_paste_circle = z61.object({
+  type: z61.literal("pcb_solder_paste"),
+  shape: z61.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   x: distance,
   y: distance,
-  radius: z60.number(),
+  radius: z61.number(),
   layer: layer_ref,
-  pcb_component_id: z60.string().optional(),
-  pcb_smtpad_id: z60.string().optional()
+  pcb_component_id: z61.string().optional(),
+  pcb_smtpad_id: z61.string().optional()
 });
-var pcb_solder_paste_rect = z60.object({
-  type: z60.literal("pcb_solder_paste"),
-  shape: z60.literal("rect"),
+var pcb_solder_paste_rect = z61.object({
+  type: z61.literal("pcb_solder_paste"),
+  shape: z61.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   x: distance,
   y: distance,
-  width: z60.number(),
-  height: z60.number(),
+  width: z61.number(),
+  height: z61.number(),
   layer: layer_ref,
-  pcb_component_id: z60.string().optional(),
-  pcb_smtpad_id: z60.string().optional()
+  pcb_component_id: z61.string().optional(),
+  pcb_smtpad_id: z61.string().optional()
 });
-var pcb_solder_paste_pill = z60.object({
-  type: z60.literal("pcb_solder_paste"),
-  shape: z60.literal("pill"),
+var pcb_solder_paste_pill = z61.object({
+  type: z61.literal("pcb_solder_paste"),
+  shape: z61.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   x: distance,
   y: distance,
-  width: z60.number(),
-  height: z60.number(),
-  radius: z60.number(),
+  width: z61.number(),
+  height: z61.number(),
+  radius: z61.number(),
   layer: layer_ref,
-  pcb_component_id: z60.string().optional(),
-  pcb_smtpad_id: z60.string().optional()
+  pcb_component_id: z61.string().optional(),
+  pcb_smtpad_id: z61.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z60.object({
-  type: z60.literal("pcb_solder_paste"),
-  shape: z60.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z61.object({
+  type: z61.literal("pcb_solder_paste"),
+  shape: z61.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   x: distance,
   y: distance,
-  width: z60.number(),
-  height: z60.number(),
+  width: z61.number(),
+  height: z61.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z60.string().optional(),
-  pcb_smtpad_id: z60.string().optional()
+  pcb_component_id: z61.string().optional(),
+  pcb_smtpad_id: z61.string().optional()
 });
-var pcb_solder_paste_oval = z60.object({
-  type: z60.literal("pcb_solder_paste"),
-  shape: z60.literal("oval"),
+var pcb_solder_paste_oval = z61.object({
+  type: z61.literal("pcb_solder_paste"),
+  shape: z61.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   x: distance,
   y: distance,
-  width: z60.number(),
-  height: z60.number(),
+  width: z61.number(),
+  height: z61.number(),
   layer: layer_ref,
-  pcb_component_id: z60.string().optional(),
-  pcb_smtpad_id: z60.string().optional()
+  pcb_component_id: z61.string().optional(),
+  pcb_smtpad_id: z61.string().optional()
 });
-var pcb_solder_paste = z60.union([
+var pcb_solder_paste = z61.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -1322,98 +1346,98 @@ expectTypesMatch(
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z61 } from "zod";
-var pcb_text = z61.object({
-  type: z61.literal("pcb_text"),
+import { z as z62 } from "zod";
+var pcb_text = z62.object({
+  type: z62.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z61.string().optional(),
-  subcircuit_id: z61.string().optional(),
-  text: z61.string(),
+  pcb_group_id: z62.string().optional(),
+  subcircuit_id: z62.string().optional(),
+  text: z62.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z61.number(),
+  lines: z62.number(),
   // @ts-ignore
-  align: z61.enum(["bottom-left"])
+  align: z62.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z62 } from "zod";
-var pcb_trace_route_point_wire = z62.object({
-  route_type: z62.literal("wire"),
+import { z as z63 } from "zod";
+var pcb_trace_route_point_wire = z63.object({
+  route_type: z63.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z62.string().optional(),
-  end_pcb_port_id: z62.string().optional(),
+  start_pcb_port_id: z63.string().optional(),
+  end_pcb_port_id: z63.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z62.object({
-  route_type: z62.literal("via"),
+var pcb_trace_route_point_via = z63.object({
+  route_type: z63.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z62.string(),
-  to_layer: z62.string()
+  from_layer: z63.string(),
+  to_layer: z63.string()
 });
-var pcb_trace_route_point = z62.union([
+var pcb_trace_route_point = z63.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z62.object({
-  type: z62.literal("pcb_trace"),
-  source_trace_id: z62.string().optional(),
-  pcb_component_id: z62.string().optional(),
+var pcb_trace = z63.object({
+  type: z63.literal("pcb_trace"),
+  source_trace_id: z63.string().optional(),
+  pcb_component_id: z63.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
-  route_thickness_mode: z62.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z62.number().optional(),
-  should_round_corners: z62.boolean().optional(),
-  trace_length: z62.number().optional(),
-  route: z62.array(pcb_trace_route_point)
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  route_thickness_mode: z63.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z63.number().optional(),
+  should_round_corners: z63.boolean().optional(),
+  trace_length: z63.number().optional(),
+  route: z63.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z63 } from "zod";
-var pcb_trace_error = z63.object({
-  type: z63.literal("pcb_trace_error"),
+import { z as z64 } from "zod";
+var pcb_trace_error = z64.object({
+  type: z64.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z63.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z63.string(),
+  error_type: z64.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z64.string(),
   center: point.optional(),
-  pcb_trace_id: z63.string(),
-  source_trace_id: z63.string(),
-  pcb_component_ids: z63.array(z63.string()),
-  pcb_port_ids: z63.array(z63.string()),
-  subcircuit_id: z63.string().optional()
+  pcb_trace_id: z64.string(),
+  source_trace_id: z64.string(),
+  pcb_component_ids: z64.array(z64.string()),
+  pcb_port_ids: z64.array(z64.string()),
+  subcircuit_id: z64.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z64 } from "zod";
-var pcb_port_not_matched_error = z64.object({
-  type: z64.literal("pcb_port_not_matched_error"),
+import { z as z65 } from "zod";
+var pcb_port_not_matched_error = z65.object({
+  type: z65.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z64.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z64.string(),
-  pcb_component_ids: z64.array(z64.string()),
-  subcircuit_id: z64.string().optional()
+  error_type: z65.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z65.string(),
+  pcb_component_ids: z65.array(z65.string()),
+  subcircuit_id: z65.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z65 } from "zod";
-var pcb_via = z65.object({
-  type: z65.literal("pcb_via"),
+import { z as z66 } from "zod";
+var pcb_via = z66.object({
+  type: z66.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z65.string().optional(),
-  subcircuit_id: z65.string().optional(),
+  pcb_group_id: z66.string().optional(),
+  subcircuit_id: z66.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -1422,59 +1446,59 @@ var pcb_via = z65.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z65.array(layer_ref),
-  pcb_trace_id: z65.string().optional()
+  layers: z66.array(layer_ref),
+  pcb_trace_id: z66.string().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z66 } from "zod";
-var pcb_board = z66.object({
-  type: z66.literal("pcb_board"),
+import { z as z67 } from "zod";
+var pcb_board = z67.object({
+  type: z67.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  is_subcircuit: z66.boolean().optional(),
-  subcircuit_id: z66.string().optional(),
+  is_subcircuit: z67.boolean().optional(),
+  subcircuit_id: z67.string().optional(),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z66.number().optional().default(4),
-  outline: z66.array(point).optional(),
-  material: z66.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z67.number().optional().default(4),
+  outline: z67.array(point).optional(),
+  material: z67.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z67 } from "zod";
-var pcb_placement_error = z67.object({
-  type: z67.literal("pcb_placement_error"),
+import { z as z68 } from "zod";
+var pcb_placement_error = z68.object({
+  type: z68.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z67.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z67.string(),
-  subcircuit_id: z67.string().optional()
+  error_type: z68.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z68.string(),
+  subcircuit_id: z68.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z68 } from "zod";
-var pcb_trace_hint = z68.object({
-  type: z68.literal("pcb_trace_hint"),
+import { z as z69 } from "zod";
+var pcb_trace_hint = z69.object({
+  type: z69.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z68.string(),
-  pcb_component_id: z68.string(),
-  route: z68.array(route_hint_point),
-  subcircuit_id: z68.string().optional()
+  pcb_port_id: z69.string(),
+  pcb_component_id: z69.string(),
+  route: z69.array(route_hint_point),
+  subcircuit_id: z69.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z69 } from "zod";
-var pcb_silkscreen_line = z69.object({
-  type: z69.literal("pcb_silkscreen_line"),
+import { z as z70 } from "zod";
+var pcb_silkscreen_line = z70.object({
+  type: z70.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z69.string(),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
+  pcb_component_id: z70.string(),
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -1485,67 +1509,67 @@ var pcb_silkscreen_line = z69.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z70 } from "zod";
-var pcb_silkscreen_path = z70.object({
-  type: z70.literal("pcb_silkscreen_path"),
+import { z as z71 } from "zod";
+var pcb_silkscreen_path = z71.object({
+  type: z71.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z70.string(),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
+  pcb_component_id: z71.string(),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
   layer: visible_layer,
-  route: z70.array(point),
+  route: z71.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z71 } from "zod";
-var pcb_silkscreen_text = z71.object({
-  type: z71.literal("pcb_silkscreen_text"),
+import { z as z72 } from "zod";
+var pcb_silkscreen_text = z72.object({
+  type: z72.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  font: z71.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z72.string().optional(),
+  subcircuit_id: z72.string().optional(),
+  font: z72.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z71.string(),
-  text: z71.string(),
-  ccw_rotation: z71.number().optional(),
+  pcb_component_id: z72.string(),
+  text: z72.string(),
+  ccw_rotation: z72.number().optional(),
   layer: layer_ref,
-  is_mirrored: z71.boolean().default(false).optional(),
+  is_mirrored: z72.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z72 } from "zod";
-var pcb_silkscreen_rect = z72.object({
-  type: z72.literal("pcb_silkscreen_rect"),
+import { z as z73 } from "zod";
+var pcb_silkscreen_rect = z73.object({
+  type: z73.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z72.string(),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
+  pcb_component_id: z73.string(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
-  is_filled: z72.boolean().default(true).optional(),
-  has_stroke: z72.boolean().optional(),
-  is_stroke_dashed: z72.boolean().optional()
+  is_filled: z73.boolean().default(true).optional(),
+  has_stroke: z73.boolean().optional(),
+  is_stroke_dashed: z73.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z73 } from "zod";
-var pcb_silkscreen_circle = z73.object({
-  type: z73.literal("pcb_silkscreen_circle"),
+import { z as z74 } from "zod";
+var pcb_silkscreen_circle = z74.object({
+  type: z74.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z73.string(),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_component_id: z74.string(),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
@@ -1554,13 +1578,13 @@ var pcb_silkscreen_circle = z73.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z74 } from "zod";
-var pcb_silkscreen_oval = z74.object({
-  type: z74.literal("pcb_silkscreen_oval"),
+import { z as z75 } from "zod";
+var pcb_silkscreen_oval = z75.object({
+  type: z75.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z74.string(),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_component_id: z75.string(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -1569,87 +1593,87 @@ var pcb_silkscreen_oval = z74.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z75 } from "zod";
-var pcb_fabrication_note_text = z75.object({
-  type: z75.literal("pcb_fabrication_note_text"),
+import { z as z76 } from "zod";
+var pcb_fabrication_note_text = z76.object({
+  type: z76.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z75.string().optional(),
-  pcb_group_id: z75.string().optional(),
-  font: z75.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z76.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  font: z76.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z75.string(),
-  text: z75.string(),
+  pcb_component_id: z76.string(),
+  text: z76.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z75.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z75.string().optional()
+  anchor_alignment: z76.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z76.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z76 } from "zod";
-var pcb_fabrication_note_path = z76.object({
-  type: z76.literal("pcb_fabrication_note_path"),
+import { z as z77 } from "zod";
+var pcb_fabrication_note_path = z77.object({
+  type: z77.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z76.string(),
-  subcircuit_id: z76.string().optional(),
+  pcb_component_id: z77.string(),
+  subcircuit_id: z77.string().optional(),
   layer: layer_ref,
-  route: z76.array(point),
+  route: z77.array(point),
   stroke_width: length,
-  color: z76.string().optional()
+  color: z77.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_keepout.ts
-import { z as z77 } from "zod";
-var pcb_keepout = z77.object({
-  type: z77.literal("pcb_keepout"),
-  shape: z77.literal("rect"),
-  pcb_group_id: z77.string().optional(),
-  subcircuit_id: z77.string().optional(),
+import { z as z78 } from "zod";
+var pcb_keepout = z78.object({
+  type: z78.literal("pcb_keepout"),
+  shape: z78.literal("rect"),
+  pcb_group_id: z78.string().optional(),
+  subcircuit_id: z78.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z77.string(),
-  layers: z77.array(z77.string()),
+  pcb_keepout_id: z78.string(),
+  layers: z78.array(z78.string()),
   // Specify layers where the keepout applies
-  description: z77.string().optional()
+  description: z78.string().optional()
   // Optional description of the keepout
 }).or(
-  z77.object({
-    type: z77.literal("pcb_keepout"),
-    shape: z77.literal("circle"),
-    pcb_group_id: z77.string().optional(),
-    subcircuit_id: z77.string().optional(),
+  z78.object({
+    type: z78.literal("pcb_keepout"),
+    shape: z78.literal("circle"),
+    pcb_group_id: z78.string().optional(),
+    subcircuit_id: z78.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z77.string(),
-    layers: z77.array(z77.string()),
+    pcb_keepout_id: z78.string(),
+    layers: z78.array(z78.string()),
     // Specify layers where the keepout applies
-    description: z77.string().optional()
+    description: z78.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_cutout.ts
-import { z as z78 } from "zod";
-var pcb_cutout_base = z78.object({
-  type: z78.literal("pcb_cutout"),
+import { z as z79 } from "zod";
+var pcb_cutout_base = z79.object({
+  type: z79.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z78.string().optional(),
-  subcircuit_id: z78.string().optional()
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z78.literal("rect"),
+  shape: z79.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -1657,17 +1681,17 @@ var pcb_cutout_rect = pcb_cutout_base.extend({
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z78.literal("circle"),
+  shape: z79.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z78.literal("polygon"),
-  points: z78.array(point)
+  shape: z79.literal("polygon"),
+  points: z79.array(point)
 });
 expectTypesMatch(true);
-var pcb_cutout = z78.discriminatedUnion("shape", [
+var pcb_cutout = z79.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
   pcb_cutout_polygon
@@ -1675,82 +1699,82 @@ var pcb_cutout = z78.discriminatedUnion("shape", [
 expectTypesMatch(true);
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z79 } from "zod";
-var pcb_missing_footprint_error = z79.object({
-  type: z79.literal("pcb_missing_footprint_error"),
+import { z as z80 } from "zod";
+var pcb_missing_footprint_error = z80.object({
+  type: z80.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z79.string().optional(),
-  subcircuit_id: z79.string().optional(),
-  error_type: z79.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z79.string(),
-  message: z79.string()
+  pcb_group_id: z80.string().optional(),
+  subcircuit_id: z80.string().optional(),
+  error_type: z80.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z80.string(),
+  message: z80.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_group.ts
-import { z as z80 } from "zod";
-var pcb_group = z80.object({
-  type: z80.literal("pcb_group"),
+import { z as z81 } from "zod";
+var pcb_group = z81.object({
+  type: z81.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z80.string(),
-  is_subcircuit: z80.boolean().optional(),
-  subcircuit_id: z80.string().optional(),
+  source_group_id: z81.string(),
+  is_subcircuit: z81.boolean().optional(),
+  subcircuit_id: z81.string().optional(),
   width: length,
   height: length,
   center: point,
-  pcb_component_ids: z80.array(z80.string()),
-  name: z80.string().optional(),
-  description: z80.string().optional(),
-  autorouter_configuration: z80.object({
+  pcb_component_ids: z81.array(z81.string()),
+  name: z81.string().optional(),
+  description: z81.string().optional(),
+  autorouter_configuration: z81.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z80.string().optional()
+  autorouter_used_string: z81.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z81 } from "zod";
-var pcb_autorouting_error = z81.object({
-  type: z81.literal("pcb_autorouting_error"),
+import { z as z82 } from "zod";
+var pcb_autorouting_error = z82.object({
+  type: z82.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z81.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z81.string(),
-  subcircuit_id: z81.string().optional()
+  error_type: z82.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z82.string(),
+  subcircuit_id: z82.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/pcb/pcb_manual_edit_conflict_warning.ts
-import { z as z82 } from "zod";
-var pcb_manual_edit_conflict_warning = z82.object({
-  type: z82.literal("pcb_manual_edit_conflict_warning"),
+import { z as z83 } from "zod";
+var pcb_manual_edit_conflict_warning = z83.object({
+  type: z83.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z82.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z82.string(),
-  pcb_component_id: z82.string(),
-  pcb_group_id: z82.string().optional(),
-  subcircuit_id: z82.string().optional(),
-  source_component_id: z82.string()
+  warning_type: z83.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z83.string(),
+  pcb_component_id: z83.string(),
+  pcb_group_id: z83.string().optional(),
+  subcircuit_id: z83.string().optional(),
+  source_component_id: z83.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_breakout_point.ts
-import { z as z83 } from "zod";
-var pcb_breakout_point = z83.object({
-  type: z83.literal("pcb_breakout_point"),
+import { z as z84 } from "zod";
+var pcb_breakout_point = z84.object({
+  type: z84.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z83.string(),
-  subcircuit_id: z83.string().optional(),
-  source_trace_id: z83.string().optional(),
-  source_port_id: z83.string().optional(),
-  source_net_id: z83.string().optional(),
+  pcb_group_id: z84.string(),
+  subcircuit_id: z84.string().optional(),
+  source_trace_id: z84.string().optional(),
+  source_port_id: z84.string().optional(),
+  source_net_id: z84.string().optional(),
   x: distance,
   y: distance
 }).describe(
@@ -1759,72 +1783,72 @@ var pcb_breakout_point = z83.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane.ts
-import { z as z84 } from "zod";
-var pcb_ground_plane = z84.object({
-  type: z84.literal("pcb_ground_plane"),
+import { z as z85 } from "zod";
+var pcb_ground_plane = z85.object({
+  type: z85.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z84.string(),
-  source_net_id: z84.string(),
-  pcb_group_id: z84.string().optional(),
-  subcircuit_id: z84.string().optional()
+  source_pcb_ground_plane_id: z85.string(),
+  source_net_id: z85.string(),
+  pcb_group_id: z85.string().optional(),
+  subcircuit_id: z85.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_ground_plane_region.ts
-import { z as z85 } from "zod";
-var pcb_ground_plane_region = z85.object({
-  type: z85.literal("pcb_ground_plane_region"),
+import { z as z86 } from "zod";
+var pcb_ground_plane_region = z86.object({
+  type: z86.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z85.string(),
-  pcb_group_id: z85.string().optional(),
-  subcircuit_id: z85.string().optional(),
+  pcb_ground_plane_id: z86.string(),
+  pcb_group_id: z86.string().optional(),
+  subcircuit_id: z86.string().optional(),
   layer: layer_ref,
-  points: z85.array(point)
+  points: z86.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
 
 // src/pcb/pcb_thermal_spoke.ts
-import { z as z86 } from "zod";
-var pcb_thermal_spoke = z86.object({
-  type: z86.literal("pcb_thermal_spoke"),
+import { z as z87 } from "zod";
+var pcb_thermal_spoke = z87.object({
+  type: z87.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z86.string(),
-  shape: z86.string(),
-  spoke_count: z86.number(),
+  pcb_ground_plane_id: z87.string(),
+  shape: z87.string(),
+  spoke_count: z87.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z86.string().optional(),
-  subcircuit_id: z86.string().optional()
+  pcb_plated_hole_id: z87.string().optional(),
+  subcircuit_id: z87.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z87 } from "zod";
-var cad_component = z87.object({
-  type: z87.literal("cad_component"),
-  cad_component_id: z87.string(),
-  pcb_component_id: z87.string(),
-  source_component_id: z87.string(),
+import { z as z88 } from "zod";
+var cad_component = z88.object({
+  type: z88.literal("cad_component"),
+  cad_component_id: z88.string(),
+  pcb_component_id: z88.string(),
+  source_component_id: z88.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z87.string().optional(),
+  subcircuit_id: z88.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z87.string().optional(),
-  model_obj_url: z87.string().optional(),
-  model_stl_url: z87.string().optional(),
-  model_3mf_url: z87.string().optional(),
-  model_jscad: z87.any().optional()
+  footprinter_string: z88.string().optional(),
+  model_obj_url: z88.string().optional(),
+  model_stl_url: z88.string().optional(),
+  model_3mf_url: z88.string().optional(),
+  model_jscad: z88.any().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/any_circuit_element.ts
-import { z as z88 } from "zod";
-var any_circuit_element = z88.union([
+import { z as z89 } from "zod";
+var any_circuit_element = z89.union([
   source_trace,
   source_port,
   any_source_component,
@@ -1894,6 +1918,7 @@ var any_circuit_element = z88.union([
   schematic_voltage_probe,
   schematic_manual_edit_conflict_warning,
   schematic_group,
+  schematic_table,
   cad_component
 ]);
 var any_soup_element = any_circuit_element;
@@ -1985,6 +2010,8 @@ export {
   schematic_path,
   schematic_pin_styles,
   schematic_port,
+  schematic_table,
+  schematic_table_cell,
   schematic_text,
   schematic_trace,
   schematic_voltage_probe,