circuit-json 0.0.153 → 0.0.155

package/dist/index.mjs

@@ -746,8 +746,25 @@ var schematic_voltage_probe = z42.object({
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
 
-// src/pcb/properties/layer_ref.ts
+// src/schematic/schematic_manual_edit_conflict_warning.ts
 import { z as z43 } from "zod";
+var schematic_manual_edit_conflict_warning = z43.object({
+  type: z43.literal("schematic_manual_edit_conflict_warning"),
+  schematic_warning_id: getZodPrefixedIdWithDefault(
+    "schematic_manual_edit_conflict_warning"
+  ),
+  message: z43.string(),
+  schematic_component_id: z43.string(),
+  schematic_group_id: z43.string().optional(),
+  subcircuit_id: z43.string().optional(),
+  source_component_id: z43.string()
+}).describe(
+  "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
+);
+expectTypesMatch(true);
+
+// src/pcb/properties/layer_ref.ts
+import { z as z44 } from "zod";
 var all_layers = [
   "top",
   "bottom",
@@ -758,9 +775,9 @@ var all_layers = [
   "inner5",
   "inner6"
 ];
-var layer_string = z43.enum(all_layers);
+var layer_string = z44.enum(all_layers);
 var layer_ref = layer_string.or(
-  z43.object({
+  z44.object({
     name: layer_string
   })
 ).transform((layer) => {
@@ -769,52 +786,52 @@ var layer_ref = layer_string.or(
   }
   return layer.name;
 });
-var visible_layer = z43.enum(["top", "bottom"]);
+var visible_layer = z44.enum(["top", "bottom"]);
 
 // src/pcb/properties/pcb_route_hints.ts
-import { z as z44 } from "zod";
-var pcb_route_hint = z44.object({
+import { z as z45 } from "zod";
+var pcb_route_hint = z45.object({
   x: distance,
   y: distance,
-  via: z44.boolean().optional(),
+  via: z45.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z44.array(pcb_route_hint);
+var pcb_route_hints = z45.array(pcb_route_hint);
 
 // src/pcb/properties/route_hint_point.ts
-import { z as z45 } from "zod";
-var route_hint_point = z45.object({
+import { z as z46 } from "zod";
+var route_hint_point = z46.object({
   x: distance,
   y: distance,
-  via: z45.boolean().optional(),
+  via: z46.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 
 // src/pcb/pcb_component.ts
-import { z as z46 } from "zod";
-var pcb_component = z46.object({
-  type: z46.literal("pcb_component"),
+import { z as z47 } from "zod";
+var pcb_component = z47.object({
+  type: z47.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z46.string(),
+  source_component_id: z47.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  subcircuit_id: z46.string().optional()
+  subcircuit_id: z47.string().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_hole.ts
-import { z as z47 } from "zod";
-var pcb_hole_circle_or_square = z47.object({
-  type: z47.literal("pcb_hole"),
+import { z as z48 } from "zod";
+var pcb_hole_circle_or_square = z48.object({
+  type: z48.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z47.string().optional(),
-  subcircuit_id: z47.string().optional(),
-  hole_shape: z47.enum(["circle", "square"]),
-  hole_diameter: z47.number(),
+  pcb_group_id: z48.string().optional(),
+  subcircuit_id: z48.string().optional(),
+  hole_shape: z48.enum(["circle", "square"]),
+  hole_diameter: z48.number(),
   x: distance,
   y: distance
 });
@@ -822,14 +839,14 @@ var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z47.object({
-  type: z47.literal("pcb_hole"),
+var pcb_hole_oval = z48.object({
+  type: z48.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z47.string().optional(),
-  subcircuit_id: z47.string().optional(),
-  hole_shape: z47.literal("oval"),
-  hole_width: z47.number(),
-  hole_height: z47.number(),
+  pcb_group_id: z48.string().optional(),
+  subcircuit_id: z48.string().optional(),
+  hole_shape: z48.literal("oval"),
+  hole_width: z48.number(),
+  hole_height: z48.number(),
   x: distance,
   y: distance
 });
@@ -840,77 +857,77 @@ expectTypesMatch(true);
 var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval);
 
 // src/pcb/pcb_plated_hole.ts
-import { z as z48 } from "zod";
-var pcb_plated_hole_circle = z48.object({
-  type: z48.literal("pcb_plated_hole"),
-  shape: z48.literal("circle"),
-  pcb_group_id: z48.string().optional(),
-  subcircuit_id: z48.string().optional(),
-  outer_diameter: z48.number(),
-  hole_diameter: z48.number(),
+import { z as z49 } from "zod";
+var pcb_plated_hole_circle = z49.object({
+  type: z49.literal("pcb_plated_hole"),
+  shape: z49.literal("circle"),
+  pcb_group_id: z49.string().optional(),
+  subcircuit_id: z49.string().optional(),
+  outer_diameter: z49.number(),
+  hole_diameter: z49.number(),
   x: distance,
   y: distance,
-  layers: z48.array(layer_ref),
-  port_hints: z48.array(z48.string()).optional(),
-  pcb_component_id: z48.string().optional(),
-  pcb_port_id: z48.string().optional(),
+  layers: z49.array(layer_ref),
+  port_hints: z49.array(z49.string()).optional(),
+  pcb_component_id: z49.string().optional(),
+  pcb_port_id: z49.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole_oval = z48.object({
-  type: z48.literal("pcb_plated_hole"),
-  shape: z48.enum(["oval", "pill"]),
-  pcb_group_id: z48.string().optional(),
-  subcircuit_id: z48.string().optional(),
-  outer_width: z48.number(),
-  outer_height: z48.number(),
-  hole_width: z48.number(),
-  hole_height: z48.number(),
+var pcb_plated_hole_oval = z49.object({
+  type: z49.literal("pcb_plated_hole"),
+  shape: z49.enum(["oval", "pill"]),
+  pcb_group_id: z49.string().optional(),
+  subcircuit_id: z49.string().optional(),
+  outer_width: z49.number(),
+  outer_height: z49.number(),
+  hole_width: z49.number(),
+  hole_height: z49.number(),
   x: distance,
   y: distance,
-  layers: z48.array(layer_ref),
-  port_hints: z48.array(z48.string()).optional(),
-  pcb_component_id: z48.string().optional(),
-  pcb_port_id: z48.string().optional(),
+  layers: z49.array(layer_ref),
+  port_hints: z49.array(z49.string()).optional(),
+  pcb_component_id: z49.string().optional(),
+  pcb_port_id: z49.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_circular_hole_with_rect_pad = z48.object({
-  type: z48.literal("pcb_plated_hole"),
-  shape: z48.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z48.string().optional(),
-  subcircuit_id: z48.string().optional(),
-  hole_shape: z48.literal("circle"),
-  pad_shape: z48.literal("rect"),
-  hole_diameter: z48.number(),
-  rect_pad_width: z48.number(),
-  rect_pad_height: z48.number(),
+var pcb_circular_hole_with_rect_pad = z49.object({
+  type: z49.literal("pcb_plated_hole"),
+  shape: z49.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z49.string().optional(),
+  subcircuit_id: z49.string().optional(),
+  hole_shape: z49.literal("circle"),
+  pad_shape: z49.literal("rect"),
+  hole_diameter: z49.number(),
+  rect_pad_width: z49.number(),
+  rect_pad_height: z49.number(),
   x: distance,
   y: distance,
-  layers: z48.array(layer_ref),
-  port_hints: z48.array(z48.string()).optional(),
-  pcb_component_id: z48.string().optional(),
-  pcb_port_id: z48.string().optional(),
+  layers: z49.array(layer_ref),
+  port_hints: z49.array(z49.string()).optional(),
+  pcb_component_id: z49.string().optional(),
+  pcb_port_id: z49.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_pill_hole_with_rect_pad = z48.object({
-  type: z48.literal("pcb_plated_hole"),
-  shape: z48.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z48.string().optional(),
-  subcircuit_id: z48.string().optional(),
-  hole_shape: z48.literal("pill"),
-  pad_shape: z48.literal("rect"),
-  hole_width: z48.number(),
-  hole_height: z48.number(),
-  rect_pad_width: z48.number(),
-  rect_pad_height: z48.number(),
+var pcb_pill_hole_with_rect_pad = z49.object({
+  type: z49.literal("pcb_plated_hole"),
+  shape: z49.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z49.string().optional(),
+  subcircuit_id: z49.string().optional(),
+  hole_shape: z49.literal("pill"),
+  pad_shape: z49.literal("rect"),
+  hole_width: z49.number(),
+  hole_height: z49.number(),
+  rect_pad_width: z49.number(),
+  rect_pad_height: z49.number(),
   x: distance,
   y: distance,
-  layers: z48.array(layer_ref),
-  port_hints: z48.array(z48.string()).optional(),
-  pcb_component_id: z48.string().optional(),
-  pcb_port_id: z48.string().optional(),
+  layers: z49.array(layer_ref),
+  port_hints: z49.array(z49.string()).optional(),
+  pcb_component_id: z49.string().optional(),
+  pcb_port_id: z49.string().optional(),
   pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
 });
-var pcb_plated_hole = z48.union([
+var pcb_plated_hole = z49.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad
@@ -922,84 +939,84 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_port.ts
-import { z as z49 } from "zod";
-var pcb_port = z49.object({
-  type: z49.literal("pcb_port"),
+import { z as z50 } from "zod";
+var pcb_port = z50.object({
+  type: z50.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z49.string().optional(),
-  subcircuit_id: z49.string().optional(),
-  source_port_id: z49.string(),
-  pcb_component_id: z49.string(),
+  pcb_group_id: z50.string().optional(),
+  subcircuit_id: z50.string().optional(),
+  source_port_id: z50.string(),
+  pcb_component_id: z50.string(),
   x: distance,
   y: distance,
-  layers: z49.array(layer_ref)
+  layers: z50.array(layer_ref)
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_smtpad.ts
-import { z as z50 } from "zod";
-var pcb_smtpad_circle = z50.object({
-  type: z50.literal("pcb_smtpad"),
-  shape: z50.literal("circle"),
+import { z as z51 } from "zod";
+var pcb_smtpad_circle = z51.object({
+  type: z51.literal("pcb_smtpad"),
+  shape: z51.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z50.string().optional(),
-  subcircuit_id: z50.string().optional(),
+  pcb_group_id: z51.string().optional(),
+  subcircuit_id: z51.string().optional(),
   x: distance,
   y: distance,
-  radius: z50.number(),
+  radius: z51.number(),
   layer: layer_ref,
-  port_hints: z50.array(z50.string()).optional(),
-  pcb_component_id: z50.string().optional(),
-  pcb_port_id: z50.string().optional()
+  port_hints: z51.array(z51.string()).optional(),
+  pcb_component_id: z51.string().optional(),
+  pcb_port_id: z51.string().optional()
 });
-var pcb_smtpad_rect = z50.object({
-  type: z50.literal("pcb_smtpad"),
-  shape: z50.literal("rect"),
+var pcb_smtpad_rect = z51.object({
+  type: z51.literal("pcb_smtpad"),
+  shape: z51.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z50.string().optional(),
-  subcircuit_id: z50.string().optional(),
+  pcb_group_id: z51.string().optional(),
+  subcircuit_id: z51.string().optional(),
   x: distance,
   y: distance,
-  width: z50.number(),
-  height: z50.number(),
+  width: z51.number(),
+  height: z51.number(),
   layer: layer_ref,
-  port_hints: z50.array(z50.string()).optional(),
-  pcb_component_id: z50.string().optional(),
-  pcb_port_id: z50.string().optional()
+  port_hints: z51.array(z51.string()).optional(),
+  pcb_component_id: z51.string().optional(),
+  pcb_port_id: z51.string().optional()
 });
-var pcb_smtpad_rotated_rect = z50.object({
-  type: z50.literal("pcb_smtpad"),
-  shape: z50.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z51.object({
+  type: z51.literal("pcb_smtpad"),
+  shape: z51.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z50.string().optional(),
-  subcircuit_id: z50.string().optional(),
+  pcb_group_id: z51.string().optional(),
+  subcircuit_id: z51.string().optional(),
   x: distance,
   y: distance,
-  width: z50.number(),
-  height: z50.number(),
+  width: z51.number(),
+  height: z51.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z50.array(z50.string()).optional(),
-  pcb_component_id: z50.string().optional(),
-  pcb_port_id: z50.string().optional()
+  port_hints: z51.array(z51.string()).optional(),
+  pcb_component_id: z51.string().optional(),
+  pcb_port_id: z51.string().optional()
 });
-var pcb_smtpad_pill = z50.object({
-  type: z50.literal("pcb_smtpad"),
-  shape: z50.literal("pill"),
+var pcb_smtpad_pill = z51.object({
+  type: z51.literal("pcb_smtpad"),
+  shape: z51.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z50.string().optional(),
-  subcircuit_id: z50.string().optional(),
+  pcb_group_id: z51.string().optional(),
+  subcircuit_id: z51.string().optional(),
   x: distance,
   y: distance,
-  width: z50.number(),
-  height: z50.number(),
-  radius: z50.number(),
+  width: z51.number(),
+  height: z51.number(),
+  radius: z51.number(),
   layer: layer_ref,
-  port_hints: z50.array(z50.string()).optional(),
-  pcb_component_id: z50.string().optional(),
-  pcb_port_id: z50.string().optional()
+  port_hints: z51.array(z51.string()).optional(),
+  pcb_component_id: z51.string().optional(),
+  pcb_port_id: z51.string().optional()
 });
-var pcb_smtpad = z50.union([
+var pcb_smtpad = z51.union([
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -1011,106 +1028,106 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_solder_paste.ts
-import { z as z51 } from "zod";
-var pcb_solder_paste_circle = z51.object({
-  type: z51.literal("pcb_solder_paste"),
-  shape: z51.literal("circle"),
+import { z as z52 } from "zod";
+var pcb_solder_paste_circle = z52.object({
+  type: z52.literal("pcb_solder_paste"),
+  shape: z52.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z51.string().optional(),
-  subcircuit_id: z51.string().optional(),
+  pcb_group_id: z52.string().optional(),
+  subcircuit_id: z52.string().optional(),
   x: distance,
   y: distance,
-  radius: z51.number(),
+  radius: z52.number(),
   layer: layer_ref,
-  pcb_component_id: z51.string().optional(),
-  pcb_smtpad_id: z51.string().optional()
+  pcb_component_id: z52.string().optional(),
+  pcb_smtpad_id: z52.string().optional()
 });
-var pcb_solder_paste_rect = z51.object({
-  type: z51.literal("pcb_solder_paste"),
-  shape: z51.literal("rect"),
+var pcb_solder_paste_rect = z52.object({
+  type: z52.literal("pcb_solder_paste"),
+  shape: z52.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z51.string().optional(),
-  subcircuit_id: z51.string().optional(),
+  pcb_group_id: z52.string().optional(),
+  subcircuit_id: z52.string().optional(),
   x: distance,
   y: distance,
-  width: z51.number(),
-  height: z51.number(),
+  width: z52.number(),
+  height: z52.number(),
   layer: layer_ref,
-  pcb_component_id: z51.string().optional(),
-  pcb_smtpad_id: z51.string().optional()
+  pcb_component_id: z52.string().optional(),
+  pcb_smtpad_id: z52.string().optional()
 });
-var pcb_solder_paste = z51.union([pcb_solder_paste_circle, pcb_solder_paste_rect]).describe("Defines solderpaste on the PCB");
+var pcb_solder_paste = z52.union([pcb_solder_paste_circle, pcb_solder_paste_rect]).describe("Defines solderpaste on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_text.ts
-import { z as z52 } from "zod";
-var pcb_text = z52.object({
-  type: z52.literal("pcb_text"),
+import { z as z53 } from "zod";
+var pcb_text = z53.object({
+  type: z53.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z52.string().optional(),
-  subcircuit_id: z52.string().optional(),
-  text: z52.string(),
+  pcb_group_id: z53.string().optional(),
+  subcircuit_id: z53.string().optional(),
+  text: z53.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z52.number(),
+  lines: z53.number(),
   // @ts-ignore
-  align: z52.enum(["bottom-left"])
+  align: z53.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace.ts
-import { z as z53 } from "zod";
-var pcb_trace_route_point_wire = z53.object({
-  route_type: z53.literal("wire"),
+import { z as z54 } from "zod";
+var pcb_trace_route_point_wire = z54.object({
+  route_type: z54.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z53.string().optional(),
-  end_pcb_port_id: z53.string().optional(),
+  start_pcb_port_id: z54.string().optional(),
+  end_pcb_port_id: z54.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z53.object({
-  route_type: z53.literal("via"),
+var pcb_trace_route_point_via = z54.object({
+  route_type: z54.literal("via"),
   x: distance,
   y: distance,
-  from_layer: z53.string(),
-  to_layer: z53.string()
+  from_layer: z54.string(),
+  to_layer: z54.string()
 });
-var pcb_trace_route_point = z53.union([
+var pcb_trace_route_point = z54.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z53.object({
-  type: z53.literal("pcb_trace"),
-  source_trace_id: z53.string().optional(),
-  pcb_component_id: z53.string().optional(),
+var pcb_trace = z54.object({
+  type: z54.literal("pcb_trace"),
+  source_trace_id: z54.string().optional(),
+  pcb_component_id: z54.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z53.string().optional(),
-  subcircuit_id: z53.string().optional(),
-  route_thickness_mode: z53.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z53.number().optional(),
-  should_round_corners: z53.boolean().optional(),
-  trace_length: z53.number().optional(),
-  route: z53.array(
-    z53.union([
-      z53.object({
-        route_type: z53.literal("wire"),
+  pcb_group_id: z54.string().optional(),
+  subcircuit_id: z54.string().optional(),
+  route_thickness_mode: z54.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z54.number().optional(),
+  should_round_corners: z54.boolean().optional(),
+  trace_length: z54.number().optional(),
+  route: z54.array(
+    z54.union([
+      z54.object({
+        route_type: z54.literal("wire"),
         x: distance,
         y: distance,
         width: distance,
-        start_pcb_port_id: z53.string().optional(),
-        end_pcb_port_id: z53.string().optional(),
+        start_pcb_port_id: z54.string().optional(),
+        end_pcb_port_id: z54.string().optional(),
         layer: layer_ref
       }),
-      z53.object({
-        route_type: z53.literal("via"),
+      z54.object({
+        route_type: z54.literal("via"),
         x: distance,
         y: distance,
-        from_layer: z53.string(),
-        to_layer: z53.string()
+        from_layer: z54.string(),
+        to_layer: z54.string()
       })
     ])
   )
@@ -1119,37 +1136,37 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_error.ts
-import { z as z54 } from "zod";
-var pcb_trace_error = z54.object({
-  type: z54.literal("pcb_trace_error"),
+import { z as z55 } from "zod";
+var pcb_trace_error = z55.object({
+  type: z55.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z54.literal("pcb_trace_error"),
-  message: z54.string(),
+  error_type: z55.literal("pcb_trace_error"),
+  message: z55.string(),
   center: point.optional(),
-  pcb_trace_id: z54.string(),
-  source_trace_id: z54.string(),
-  pcb_component_ids: z54.array(z54.string()),
-  pcb_port_ids: z54.array(z54.string())
+  pcb_trace_id: z55.string(),
+  source_trace_id: z55.string(),
+  pcb_component_ids: z55.array(z55.string()),
+  pcb_port_ids: z55.array(z55.string())
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_port_not_matched_error.ts
-import { z as z55 } from "zod";
-var pcb_port_not_matched_error = z55.object({
-  type: z55.literal("pcb_port_not_matched_error"),
+import { z as z56 } from "zod";
+var pcb_port_not_matched_error = z56.object({
+  type: z56.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  message: z55.string(),
-  pcb_component_ids: z55.array(z55.string())
+  message: z56.string(),
+  pcb_component_ids: z56.array(z56.string())
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
 
 // src/pcb/pcb_via.ts
-import { z as z56 } from "zod";
-var pcb_via = z56.object({
-  type: z56.literal("pcb_via"),
+import { z as z57 } from "zod";
+var pcb_via = z57.object({
+  type: z57.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z56.string().optional(),
-  subcircuit_id: z56.string().optional(),
+  pcb_group_id: z57.string().optional(),
+  subcircuit_id: z57.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -1158,55 +1175,56 @@ var pcb_via = z56.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z56.array(layer_ref),
-  pcb_trace_id: z56.string().optional()
+  layers: z57.array(layer_ref),
+  pcb_trace_id: z57.string().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_board.ts
-import { z as z57 } from "zod";
-var pcb_board = z57.object({
-  type: z57.literal("pcb_board"),
+import { z as z58 } from "zod";
+var pcb_board = z58.object({
+  type: z58.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  is_subcircuit: z57.boolean().optional(),
-  subcircuit_id: z57.string().optional(),
+  is_subcircuit: z58.boolean().optional(),
+  subcircuit_id: z58.string().optional(),
   width: length,
   height: length,
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z57.number().optional().default(4),
-  outline: z57.array(point).optional()
+  num_layers: z58.number().optional().default(4),
+  outline: z58.array(point).optional(),
+  material: z58.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_placement_error.ts
-import { z as z58 } from "zod";
-var pcb_placement_error = z58.object({
-  type: z58.literal("pcb_placement_error"),
+import { z as z59 } from "zod";
+var pcb_placement_error = z59.object({
+  type: z59.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  message: z58.string()
+  message: z59.string()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_trace_hint.ts
-import { z as z59 } from "zod";
-var pcb_trace_hint = z59.object({
-  type: z59.literal("pcb_trace_hint"),
+import { z as z60 } from "zod";
+var pcb_trace_hint = z60.object({
+  type: z60.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z59.string(),
-  pcb_component_id: z59.string(),
-  route: z59.array(route_hint_point)
+  pcb_port_id: z60.string(),
+  pcb_component_id: z60.string(),
+  route: z60.array(route_hint_point)
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_line.ts
-import { z as z60 } from "zod";
-var pcb_silkscreen_line = z60.object({
-  type: z60.literal("pcb_silkscreen_line"),
+import { z as z61 } from "zod";
+var pcb_silkscreen_line = z61.object({
+  type: z61.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z60.string(),
-  pcb_group_id: z60.string().optional(),
-  subcircuit_id: z60.string().optional(),
+  pcb_component_id: z61.string(),
+  pcb_group_id: z61.string().optional(),
+  subcircuit_id: z61.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -1217,46 +1235,46 @@ var pcb_silkscreen_line = z60.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_path.ts
-import { z as z61 } from "zod";
-var pcb_silkscreen_path = z61.object({
-  type: z61.literal("pcb_silkscreen_path"),
+import { z as z62 } from "zod";
+var pcb_silkscreen_path = z62.object({
+  type: z62.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z61.string(),
-  pcb_group_id: z61.string().optional(),
-  subcircuit_id: z61.string().optional(),
+  pcb_component_id: z62.string(),
+  pcb_group_id: z62.string().optional(),
+  subcircuit_id: z62.string().optional(),
   layer: visible_layer,
-  route: z61.array(point),
+  route: z62.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_text.ts
-import { z as z62 } from "zod";
-var pcb_silkscreen_text = z62.object({
-  type: z62.literal("pcb_silkscreen_text"),
+import { z as z63 } from "zod";
+var pcb_silkscreen_text = z63.object({
+  type: z63.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z62.string().optional(),
-  subcircuit_id: z62.string().optional(),
-  font: z62.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z63.string().optional(),
+  subcircuit_id: z63.string().optional(),
+  font: z63.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z62.string(),
-  text: z62.string(),
-  ccw_rotation: z62.number().optional(),
+  pcb_component_id: z63.string(),
+  text: z63.string(),
+  ccw_rotation: z63.number().optional(),
   layer: layer_ref,
-  is_mirrored: z62.boolean().default(false).optional(),
+  is_mirrored: z63.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z62.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center")
+  anchor_alignment: z63.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_rect.ts
-import { z as z63 } from "zod";
-var pcb_silkscreen_rect = z63.object({
-  type: z63.literal("pcb_silkscreen_rect"),
+import { z as z64 } from "zod";
+var pcb_silkscreen_rect = z64.object({
+  type: z64.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z63.string(),
-  pcb_group_id: z63.string().optional(),
-  subcircuit_id: z63.string().optional(),
+  pcb_component_id: z64.string(),
+  pcb_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
   center: point,
   width: length,
   height: length,
@@ -1266,15 +1284,15 @@ var pcb_silkscreen_rect = z63.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_circle.ts
-import { z as z64 } from "zod";
-var pcb_silkscreen_circle = z64.object({
-  type: z64.literal("pcb_silkscreen_circle"),
+import { z as z65 } from "zod";
+var pcb_silkscreen_circle = z65.object({
+  type: z65.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z64.string(),
-  pcb_group_id: z64.string().optional(),
-  subcircuit_id: z64.string().optional(),
+  pcb_component_id: z65.string(),
+  pcb_group_id: z65.string().optional(),
+  subcircuit_id: z65.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
@@ -1283,13 +1301,13 @@ var pcb_silkscreen_circle = z64.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_silkscreen_oval.ts
-import { z as z65 } from "zod";
-var pcb_silkscreen_oval = z65.object({
-  type: z65.literal("pcb_silkscreen_oval"),
+import { z as z66 } from "zod";
+var pcb_silkscreen_oval = z66.object({
+  type: z66.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z65.string(),
-  pcb_group_id: z65.string().optional(),
-  subcircuit_id: z65.string().optional(),
+  pcb_component_id: z66.string(),
+  pcb_group_id: z66.string().optional(),
+  subcircuit_id: z66.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
@@ -1298,156 +1316,156 @@ var pcb_silkscreen_oval = z65.object({
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_text.ts
-import { z as z66 } from "zod";
-var pcb_fabrication_note_text = z66.object({
-  type: z66.literal("pcb_fabrication_note_text"),
+import { z as z67 } from "zod";
+var pcb_fabrication_note_text = z67.object({
+  type: z67.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z66.string().optional(),
-  pcb_group_id: z66.string().optional(),
-  font: z66.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z67.string().optional(),
+  pcb_group_id: z67.string().optional(),
+  font: z67.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z66.string(),
-  text: z66.string(),
+  pcb_component_id: z67.string(),
+  text: z67.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z66.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z66.string().optional()
+  anchor_alignment: z67.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z67.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_fabrication_note_path.ts
-import { z as z67 } from "zod";
-var pcb_fabrication_note_path = z67.object({
-  type: z67.literal("pcb_fabrication_note_path"),
+import { z as z68 } from "zod";
+var pcb_fabrication_note_path = z68.object({
+  type: z68.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z67.string(),
-  subcircuit_id: z67.string().optional(),
+  pcb_component_id: z68.string(),
+  subcircuit_id: z68.string().optional(),
   layer: layer_ref,
-  route: z67.array(point),
+  route: z68.array(point),
   stroke_width: length,
-  color: z67.string().optional()
+  color: z68.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_keepout.ts
-import { z as z68 } from "zod";
-var pcb_keepout = z68.object({
-  type: z68.literal("pcb_keepout"),
-  shape: z68.literal("rect"),
-  pcb_group_id: z68.string().optional(),
-  subcircuit_id: z68.string().optional(),
+import { z as z69 } from "zod";
+var pcb_keepout = z69.object({
+  type: z69.literal("pcb_keepout"),
+  shape: z69.literal("rect"),
+  pcb_group_id: z69.string().optional(),
+  subcircuit_id: z69.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z68.string(),
-  layers: z68.array(z68.string()),
+  pcb_keepout_id: z69.string(),
+  layers: z69.array(z69.string()),
   // Specify layers where the keepout applies
-  description: z68.string().optional()
+  description: z69.string().optional()
   // Optional description of the keepout
 }).or(
-  z68.object({
-    type: z68.literal("pcb_keepout"),
-    shape: z68.literal("circle"),
-    pcb_group_id: z68.string().optional(),
-    subcircuit_id: z68.string().optional(),
+  z69.object({
+    type: z69.literal("pcb_keepout"),
+    shape: z69.literal("circle"),
+    pcb_group_id: z69.string().optional(),
+    subcircuit_id: z69.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z68.string(),
-    layers: z68.array(z68.string()),
+    pcb_keepout_id: z69.string(),
+    layers: z69.array(z69.string()),
     // Specify layers where the keepout applies
-    description: z68.string().optional()
+    description: z69.string().optional()
     // Optional description of the keepout
   })
 );
 
 // src/pcb/pcb_missing_footprint_error.ts
-import { z as z69 } from "zod";
-var pcb_missing_footprint_error = z69.object({
-  type: z69.literal("pcb_missing_footprint_error"),
+import { z as z70 } from "zod";
+var pcb_missing_footprint_error = z70.object({
+  type: z70.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z69.string().optional(),
-  subcircuit_id: z69.string().optional(),
-  error_type: z69.literal("pcb_missing_footprint_error"),
-  source_component_id: z69.string(),
-  message: z69.string()
+  pcb_group_id: z70.string().optional(),
+  subcircuit_id: z70.string().optional(),
+  error_type: z70.literal("pcb_missing_footprint_error"),
+  source_component_id: z70.string(),
+  message: z70.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
 
 // src/pcb/pcb_manual_edit_conflict_error.ts
-import { z as z70 } from "zod";
-var pcb_manual_edit_conflict_error = z70.object({
-  type: z70.literal("pcb_manual_edit_conflict_error"),
+import { z as z71 } from "zod";
+var pcb_manual_edit_conflict_error = z71.object({
+  type: z71.literal("pcb_manual_edit_conflict_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_manual_edit_conflict_error"),
-  message: z70.string(),
-  pcb_component_id: z70.string(),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  source_component_id: z70.string()
+  message: z71.string(),
+  pcb_component_id: z71.string(),
+  pcb_group_id: z71.string().optional(),
+  subcircuit_id: z71.string().optional(),
+  source_component_id: z71.string()
 }).describe(
   "Error emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
 
 // src/pcb/pcb_group.ts
-import { z as z71 } from "zod";
-var pcb_group = z71.object({
-  type: z71.literal("pcb_group"),
+import { z as z72 } from "zod";
+var pcb_group = z72.object({
+  type: z72.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z71.string(),
-  is_subcircuit: z71.boolean().optional(),
-  subcircuit_id: z71.string().optional(),
+  source_group_id: z72.string(),
+  is_subcircuit: z72.boolean().optional(),
+  subcircuit_id: z72.string().optional(),
   width: length,
   height: length,
   center: point,
-  pcb_component_ids: z71.array(z71.string()),
-  name: z71.string().optional(),
-  description: z71.string().optional()
+  pcb_component_ids: z72.array(z72.string()),
+  name: z72.string().optional(),
+  description: z72.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
 
 // src/pcb/pcb_autorouting_error.ts
-import { z as z72 } from "zod";
-var pcb_autorouting_error = z72.object({
-  type: z72.literal("pcb_autorouting_error"),
+import { z as z73 } from "zod";
+var pcb_autorouting_error = z73.object({
+  type: z73.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  message: z72.string()
+  message: z73.string()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
 
 // src/cad/cad_component.ts
-import { z as z73 } from "zod";
-var cad_component = z73.object({
-  type: z73.literal("cad_component"),
-  cad_component_id: z73.string(),
-  pcb_component_id: z73.string(),
-  source_component_id: z73.string(),
+import { z as z74 } from "zod";
+var cad_component = z74.object({
+  type: z74.literal("cad_component"),
+  cad_component_id: z74.string(),
+  pcb_component_id: z74.string(),
+  source_component_id: z74.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z73.string().optional(),
-  model_obj_url: z73.string().optional(),
-  model_stl_url: z73.string().optional(),
-  model_3mf_url: z73.string().optional(),
-  model_jscad: z73.any().optional()
+  footprinter_string: z74.string().optional(),
+  model_obj_url: z74.string().optional(),
+  model_stl_url: z74.string().optional(),
+  model_3mf_url: z74.string().optional(),
+  model_jscad: z74.any().optional()
 }).describe("Defines a component on the PCB");
 
 // src/any_circuit_element.ts
-import { z as z74 } from "zod";
-var any_circuit_element = z74.union([
+import { z as z75 } from "zod";
+var any_circuit_element = z75.union([
   source_trace,
   source_port,
   any_source_component,
@@ -1581,6 +1599,7 @@ export {
   schematic_debug_rect,
   schematic_error,
   schematic_line,
+  schematic_manual_edit_conflict_warning,
   schematic_net_label,
   schematic_path,
   schematic_pin_styles,